JVC Flat Panel Television HD Z70RF7 HD Z61RF7 User Manual

HD-ILA TV  
HD-Z70RF7  
HD-Z61RF7  
HD-Z56RF7  
INSTRUCTIONS  
HD-Z70RF7  
LCT2132-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please follow all the guidelines below  
Warning  
Never insert objects  
into the cabinet  
openings!  
It may cause  
a fatal electric  
shock.  
Take care when  
children are near.  
Never place anything on  
the TV!  
Placing liquids, open  
flames, cloths, paper, etc.  
on the TV may cause a fire.  
Never expose to rain  
or moisture!  
To prevent fire or  
electric shock, never  
allow liquids to enter  
the unit.  
Do not allow the TV  
to fall!  
Do not rest your elbows on, or allow children  
to hang from the TV.  
There is a risk that the TV will fall and cause  
injuries.  
Hold the TV so as not to  
scratch the screen!  
If the TV is damaged  
or behaving strangely,  
stop using it at once!  
Unplug the power cord and contact  
your retailer.  
Do not touch the screen when carrying the  
TV.  
Never cut or damage  
the power cord!  
Never try to repair  
the TV yourself!  
Do not hold by the  
screen frame when  
moving the TV!  
If the AC plug is not  
the right shape, or  
the power cord is  
not long enough,  
use an appropriate  
plug adapter or  
extension cable.  
(Consult your  
If the problem cannot be solved in  
“Troubleshooting” (P. 20), unplug  
the power cord and contact your  
retailer.  
This could cause  
the screen frame to  
detach, causing the TV  
to fall. Hold the TV as  
illustrated on the right.  
retailer.)  
Follow this manual  
regarding setup!  
Connect only to a 110-240V, 50/60Hz AC  
outlet.  
Ensure ample room to  
Never listen with  
headphones at high  
volume!  
Unplug the power cord  
when going out!  
Make enough room for  
inserting and removing  
the power plug!  
avoid overheating  
“Installation requirements” (P. 7)  
The power buttons  
It may damage your hearing.  
Never dismantle the rear  
on the remote control  
and the TV unit  
panel!  
Place the TV as near  
as possible to the AC  
outlet  
The main power supply for this TV is  
controlled by inserting or removing the  
power plug.  
cannot completely  
It may cause an electric shock.  
turn off the TV.  
For more details on installation, usage and safety  
Consult your retailer  
(Make appropriate  
Never block the  
arrangements for  
bedridden people.)  
Make sure that the cooling process (P.  
3) has completed before unplugging the  
power cord.  
ventilation holes!  
It may cause overheating or a fire.  
Handle screen with care!  
Use a soft, dry cloth when cleaning.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Please follow all the guidelines below  
Precautions  
This TV uses a lamp to project the picture on the screen. Misoperations may shorten the lamp life or  
cause malfunction of the lamp.  
Before operating the TV, read all the instructions below.  
When the power is turned  
off, the cooling down is  
performed  
When the TV is turned off, the picture on  
the screen disappears gradually. Once the  
screen is dark, cooling down is performed for  
about 1 minute.  
During this cooling-down period, the LAMP  
indicator blinks every 2 seconds.  
Do not unplug the TV while the lamp is  
cooling down. This may cause the internal  
circuits and the lamp to overheat and shorten  
the lamp life.  
When the power is turned  
on, the warming up  
commences  
Immediately after the TV is turned on, the  
picture is displayed only dimly. It takes about  
one minute for the lamp to warm up. Once  
the lamp has warmed up, you can enjoy the  
pictures at their normal brightness.  
During this warming-up period, the LAMP  
indicator blinks every 2 seconds.  
This TV has a fan to cool the  
lamp  
When the lamp is hotter, the fan works  
harder to cool the lamp. In such a case, the  
noise of the fan becomes louder but it is not  
malfunction.  
Do not place the TV too  
closely to wallpaper  
The warm air from the air ducts may change  
the colour of the wallpaper.  
While the LAMP indicator is  
blinking, the TV cannot be  
turned off  
While the LAMP indicator is  
blinking, the TV cannot be  
turned on  
You can turn on the TV within 15 seconds  
after turning off.  
Keep children or pets away  
from the air ducts  
Long exposure to the warm air from the ducts  
may cause a minor burn.  
The lamp is a consumable  
item  
Never open the lamp cover  
except when replacing the  
lamp  
Condensation on the lamp  
and screen  
Do not turn the power on and  
off repeatedly in a short period  
It subjects the TV and the lamp to stress and may  
lead to malfunctions and shorten the lamp life.  
When the lamp has blown, replace the lamp;  
otherwise, the picture cannot be displayed.  
For details “Replacing the lamp” (P. 4, 5)  
Exposing the lamp is dangerous because...  
When the heater is turned on or the TV is  
moved from a cold place to a warm place,  
droplets of water may form on the lamp and  
screen. This is called condensation. If the TV  
is used while this condensation is still present,  
the picture may seem distorted, and the inside  
of the screen may become dirty. In this case,  
wait until the condensation has gone before  
using the TV.  
The lamp becomes extremely hot  
while in use, it may cause a burn.  
Touching metallic portion of the  
lamp may cause electric shock.  
Ultraviolet rays are emitted from the  
lamp.  
Follow the instructions on  
“Replacing the lamp” when  
replacing the lamp (P. 4)  
Handle the lamp carefully and correctly;  
otherwise, it may cause a burn or an electric  
shock. In addition, it may shorten lamp life or  
cause malfunction of the TV.  
Do not keep the TV on for more  
than 24 hours consecutively  
The lamp life may be shortened.  
Never replace the lamp  
immediately after use  
Since the lamp becomes extremely hot  
while in use, it may cause a burn.  
Do not project a still picture  
for a long time  
Because of the ILA characteristics, still picture  
may stick on the screen. (The picture will  
disappear over time.)  
Never touch the lamp  
glass  
Dirt or oil from the finger may cause the  
lamp to break.  
Consult your retailer  
For more details on installation, usage and safety  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Before replacing the lamp, read all the instructions.  
Replacing the lamp  
Turn the TV off  
Wait until the LAMP  
indicator stops blinking  
Unplug the TV  
The TV uses a lamp to project the picture onto the screen. When the lamp has blown or when the  
picture becomes dark, replace the lamp.  
1
Before replacing the lamp, read all the instructions carefully.  
LAMP indicator and Power  
lamp are refered as “LAMP  
LED” and “POWER LED”  
on the Instructions of  
Replacement Lamp Kit TS-  
CL110C.  
If you feel unsure about replacing the lamp yourself  
Consult your retailer  
Preparation  
Prepare the Replacement Lamp Kit  
For purchasing the Replacement  
Lamp Kit, consult your retailer.  
Wait for at least 1 hour until the lamp has fully cooled  
2
3
Use only the specified  
Replacement Lamp Kit!  
!
This lamp is for use with JVC  
model televisions. Using the  
lamp with a different television  
or other product could cause a  
malfunction and/or damage to  
the television or lamp.  
Remove the lamp unit  
Replacement Lamp Kit:  
TS-CL110C  
Never replace the lamp before it has fully cooled!  
• High-pressure mercury lamp  
!
The lamp becomes extremely hot while in use, which may cause a burn. After turning off  
the TV, wait for at least 1 hour.  
Never attempt to replace the lamp with the TV plugged in!  
!
Attempting to replace the lamp with the TV plugged in could lead to a severe electrical  
shock.  
When the lamp is near to its end...  
Remove the lamp cover  
The following message appears on the screen.  
1
Lamp needs to replaced.  
Refer to instructions book for replacement  
instructions.  
To make the message disappear  
If you feel any warmth  
near the lamp, DO NOT  
!
After replacing the Lamp, please reset  
timer in the TV menu.  
TOUCH IT!  
Press OK, if you do not want to see this  
message again.  
Philips head type screw  
driver (cross-head type)  
After the usage time of the lamp has reached to 6500 hours, this message appears every time you turn on  
the TV.  
Remove the lamp unit  
2
Loosen  
Remove  
Possible causes of shortened lamp life  
Do not drop  
the lamp!  
Turning on/off the TV repeatedly in a short amount of time  
Keeping the TV turned on for more than 24 hours consecutively  
HD-Z70RF7 is used for explanation on the illustrations on this Instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Install the NEW lamp unit  
Reset the lamp timer  
4
6
Display the menu bar  
Unpack  
1
1
Select “Set Up”  
2
3
select  
Set Up  
Do not drop the lamp!  
Never touch the glass  
surface of the lamp!  
Oils deposited from the finger may  
cause a difference in temperature  
when the lamp heats up to its  
operating temperature, causing the  
lamp to break.  
next  
!
Do not shock the glass surface of  
the lamp!  
Select “Lamp Timer Reset”  
It may shatter the lamp causing injuries.  
Set Up  
select  
Auto Program  
Edit/Manual  
Language  
Video-1 Setting  
Video-3 Setting  
AI Volume  
Video  
Video  
Off  
Teletext Language  
HDMI Setting  
Insert  
Re-tighten  
PC Position  
Lamp Timer Reset  
2
Make sure the lamp sits securely  
and flat in the housing area.  
next  
Finish  
4
Press OK to Reset  
the Lamp Timer  
The Lamp Timer is  
Reset Successfully  
Finally, the lamp has been replaced!  
7
Never dispose of the lamp with normal trash!  
Reinstall the lamp cover  
!
The lamp contains a small amount of mercury. For disposal or recycling information, please  
contact your local authorities or consult your retailer.  
3
Tighten the screw.  
Dispose of it in the same way as disposing of fluorescent lamps.  
Turn the TV on  
Plug in the TV  
5
“Lamp” (P. 21)  
If the power lamp and LAMP indicator blink rapidly after turning on the TV  
If the lamp unit is not installed securely  
(e.g. flat in the lamp housing area), the  
TV won’t turn on. In this case, reinstall  
the lamp unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Names of all the parts  
Front panel  
Power On/Off  
Mute  
Power On / Off  
Power lamp  
ON: Lit (Blue)  
OFF: Unlit  
To change the brightness of the  
Change the channel / page  
power lamp  
“Illumination” (P. 18)  
LAMP indicator  
HD-Z70RF7  
Return to channel you want to  
view  
When this indicator blinks  
(P. 13)  
To teletext  
“About the LAMP indicator” (Below)  
Colour buttons  
Switch between “TV / VCR / DVR  
(P. 17)  
/ DVD / AUDIO”  
(P. 18)  
Display on-screen menu  
Return to TV / Watch video, etc.  
(P. 14)  
Select and confirm settings in  
menues  
HD-Z61RF7  
HD-Z56RF7  
Volume  
Change the channel / page  
To the previous screen  
Power On/Off  
Channel information  
(P. 12)  
Left side  
panel  
Switch between TV / AV  
devices  
(P. 10)  
To headphones  
Display on-screen menu  
/ set  
S-video input terminal  
(VIDEO-4)  
When watching TV / Video  
Change the aspect ratio (P. 12)  
Turn on “Cinema Surround” (P. 12)  
Change channel / page  
Video input terminal  
(VIDEO-4)  
(P. 13)  
When viewing teletext  
Audio input terminals  
(VIDEO-4)  
Volume  
Hold the current page  
Bookmark pages  
Take a snapshot of the  
screen (P. 15)  
Reveal hidden pages  
Enlarge the text  
View in multi-picture  
mode (P. 15)  
Connecting terminals on the back of the TV “Connecting external devices” (P. 10)  
About the LAMP indicator  
Check accessories  
The LAMP indicator blinks as follows.  
Insert the batteries  
When turning on the TV, the LAMP indicator blinks for  
about 1 minute every 2 seconds.  
The lamp is warming up. During this period, the TV cannot  
be turned off.  
Use two “AAA/LR03” dry cell batteries. Insert the  
batteries from the  
end, making sure the  
and  
Remote control  
polarities are correct.  
(RM-C1855)  
After turning off the TV, the LAMP indicator blinks for  
about 1 minute every 2 seconds.  
Cooling is performed. During the cooling period, the TV  
cannot be turned on.  
If the LAMP indicator blinks rapidly  
“Lamp” (P. 21)  
Switch briefly between  
teletext and TV  
To index page  
AAA/LR03 Batteries  
For confirming  
the TV works  
(P. 16)  
When watching TV  
When operating a JVC VCR or  
(P. 17)  
DVD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Basic connections  
Please read the user manuals of each device carefully before setup.  
It is necessary to connect an aerial to watch TV.  
Connect with other devices “Connecting external devices” (P. 10)  
Connect the aerial  
Connect a VCR / DVD recorder  
AERIAL  
AERIAL  
VIDEO-1  
Back of the TV  
Back of the TV  
After all the connections have been made, insert the plug into an AC outlet.  
Care when setting  
Power requirements  
Connect the power cord only to a 110-240V, 50/60Hz AC outlet.  
VCR / DVD recorder  
Installation requirements  
To avoid overheating, ensure the unit has ample room.  
Do not place the TV  
After all the connections have been made, insert the plug into an AC outlet.  
If both composite and S-VIDEO cable are connected, S-VIDEO will be enable.  
too close to wallpaper  
The warm air from the  
air ducts may change  
the colour of the  
wallpaper.  
Keep children or pets  
away from the air  
ducts  
Long exposure to  
the warm air from the  
ducts may cause a  
minor burn.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
After turning on the TV, it takes about 1 minute to  
project the picture to its full brightness.  
After turning off the TV, it takes about 5 seconds to  
make the screen dark. After that, cooling is performed  
for about 1 minute.  
Initial settings  
Set the menu language, installation location and automatically register the TV channels.  
These channels can be edited later in “Editing channels” (P. 9).  
“About the LAMP indicator” (P. 6)  
The remote control doesn’t  
work  
Begin  
1
2
Shown only when powering on for the first time.  
Confirm the mode is set to “TV”.  
The power button on the remote control can also be  
used.  
HD-Z70RF7  
HD-Z61RF7  
HD-Z56RF7  
Select a language  
When you press the Power button of the HD-Z61RF7 or  
HD-Z56RF7, recommend that press below of the button.  
>
Language  
select  
set  
Select the teletext language group  
For the teletext language group  
“Language group for teletext”  
(P. 22)  
If the characters are unreadable  
“Language group for teletext”  
(P. 22)  
>
Teletext Language  
select  
Group-1  
Group-2  
Group-3  
Group-4  
Group-5  
3
4
Automatically register channels  
>> Auto Program  
CH 28  
TV  
MENU  
BACK  
14%  
Check what was registered  
>
Edit  
Edit channels  
in “Editing channels” (P. 9)  
PR  
AV  
01  
ID  
CH/CC  
5
6
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
02  
03  
04  
05  
06  
07  
08  
09  
CC  
03  
CC 04  
CC 05  
To the previous screen  
Exit  
Confirm  
If the “JVC” logo does not appear or if  
you wish to make changes later  
“Language”, “Teletext Language” and  
“Auto Program” (P. 18)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Editing channels  
Edit the channels registered with “Auto Program” in “Initial settings” (P. 8).  
Begin  
Select a destination  
Finish  
Move a  
>Edit  
> Edit  
4
When coming from “Initial settings” (P. 8), skip to  
.
PR  
AV  
01  
ID  
CH/CC  
PR  
AV  
01  
ID  
CH/CC  
select  
channel’s  
position  
CH 21  
CH 22  
CH 21  
CH 22  
CH 24  
CH 25  
CH 23  
CC 03  
CC 04  
CC 05  
02  
03  
04  
05  
06  
07  
08  
09  
02  
03  
04  
05  
06  
07  
08  
09  
CH 23  
CH 24  
CH 25  
CC 02  
CC 03  
CC 04  
CC 05  
Display the menu bar  
MOVE  
move out  
move in  
1
Begin  
Enter a channel name  
Edit a  
>Edit  
>Edit  
Select “Set Up”  
enter the first  
PR  
AV  
01  
ID  
CH/CC  
PR  
AV  
01  
ID  
CH/CC  
channel  
name  
(red)  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
CC 03  
CC 04  
CC 05  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
CC 03  
CC 04  
CC 05  
character  
select  
02  
03  
04  
05  
06  
07  
08  
09  
02  
03  
04  
05  
06  
07  
08  
09  
2
ID  
A
JVC  
next column  
set  
Set Up  
next  
Select “Edit / Manual”  
Begin  
Select a CH / CC  
Enter a number  
Receives the  
broadcast  
signal.  
Set Up  
>Edit  
select  
>Edit  
(green)  
3
Auto Program  
Edit/Manual  
Language  
PR  
AV  
01  
ID  
CH/CC  
PR  
AV  
01  
ID  
CH/CC  
select  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
CC  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
CC  
CC 03  
CC 04  
Insert a  
channel  
02  
03  
04  
05  
06  
07  
08  
09  
02  
03  
04  
05  
06  
07  
08  
09  
Video-1 Setting  
Video-3 Setting  
AI Volume  
Video  
Video  
Off  
Teletext Language  
HDMI Setting  
PC Position  
12  
Lamp Timer Reset  
INSERT  
CC 03  
CC 04  
next  
“CH/CC List” (P. 22)  
Select a row  
>
Edit  
select  
PR  
AV  
01  
ID  
CH/CC  
4
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
Delete  
(yellow)  
02  
03  
04  
05  
06  
07  
08  
09  
>Edit  
Delete a  
channel  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
ID  
CH/CC  
CC  
03  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
CC 03  
CC 04  
CC 04  
CC 05  
To the previous  
screen  
DELETE  
Edit  
5
6
From high  
From low  
Begin  
(blue)  
Beginning channel search  
frequencies frequencies  
> Manual  
> Manual  
Auto-search begins,  
and the nearest  
Exit  
(red)  
(green)  
ID  
CH/CC  
PR  
10  
11  
12  
13  
14  
15  
16  
17  
ID  
CH/CC  
PR  
10  
11  
CC 06  
CC 06  
CH 02 (B/G)  
CH 08 (B/G)  
12  
13  
14  
15  
16  
17  
frequency is imported.  
Repeat the previous  
steps until the  
Finish  
or  
desired channel is  
displayed  
If you can not receive the  
channel you want to view,  
press to change the sound  
system.  
Adjust  
>Manual  
Register a  
PR  
ID  
CH/CC  
10  
CC 06  
CH 08 (I)  
new channel  
11  
12  
13  
14  
15  
16  
“Sound system in your  
country or region” (P. 22)  
MANUAL  
(yellow) (blue)  
Picture fine tuning  
Sound fine tuning  
/
Set  
> Edit  
ID  
PR  
CH/CC  
select a system  
10  
CC 06  
11  
12  
13  
14  
15  
16  
17  
CH 08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
VCR / DVD / other devices  
Connecting external devices  
You can connect many devices to the rear panel of the TV.  
Please read the user manuals of each device before setup. (Connecting cables are not supplied with this TV.)  
Plug in headphones  
: signal direction  
VCR / DVD recorder  
VIDEO-1  
DVD player  
Game consoles  
Video camera  
(HDMI compatible)  
Left side panel  
Rear panel  
HDMI-1  
VIDEO-4  
Set-top box  
/ Digital broadcast  
tuner  
Analogue Audio input (HDMI-1)  
“HDMI Setting” (P. 18)  
VIDEO-2  
VIDEO-3  
DVD player  
(HDMI compatible)  
VCR / DVD  
recorder  
HDMI-2  
VCR / DVD recorder  
Amplifier  
Connect a PC  
AERIAL  
OUT  
(L)  
(R)  
Check for PC compatibility  
“Technical information” (P. 22)  
JVC’s VCR / DVD player  
AV  
COMPULINK  
(AV COMPULINK compatible)  
PC IN  
AV COMPULINK  
This feature makes playing video tapes or DVDs totally automatic.  
Simply insert a pre-recorded media into your JVC brand VCR or DVD player and the device will automatically turn on and  
begin playback. At the same time, using the AV CompuLink, the VCR or DVD player sends a signal to the television telling it to  
turn on and switch to the proper video input.  
Connect DVI devices to  
“HDMI-1”  
(P. 22)  
Refer to your DVD or VCR’s instruction book for detailed connection information.  
Watching videos  
Input  
Watching videos  
Input  
Watching videos  
Input  
Watching videos  
Input  
VIDEO-1  
VIDEO-2  
VIDEO-3  
VIDEO-4  
HDMI-1  
OUT  
Connecting  
Video and sound signal of a TV channel  
you are viewing s from this terminal  
HDMI devices  
Output  
Output  
Output  
Output  
HDMI-2  
·
Component signal  
/ S-VIDEO /  
· S-VIDEO /  
Composite signal  
· Sound L / R  
·
Component signal  
Composite signal  
· Sound L / R  
/
· S-VIDEO /  
Composite signal  
· Sound L / R  
Output  
Input  
Output  
Input  
· S-VIDEO /  
Composite signal  
· Sound L / R  
Composite signal  
· HDMI signal  
· Sound L / R  
(HDMI-1 only)  
· Sound L / R  
Use S-VIDEO  
Use Component signal  
“Switch between video and  
component signal” (P. 14)  
Use S-VIDEO  
Use Component signal  
“Switch between video and  
component signal” (P. 14)  
Use S-VIDEO  
“Using S-VIDEO” (P. 14)  
“Using S-VIDEO” (P. 14)  
“Using OUT terminal” (P. 14)  
“HDMI Setting” (P. 18)  
HDMI-2 input does not support  
analogue sound.  
“Using S-VIDEO” (P. 14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Enjoying your new TV!  
TV mode  
TV and Text mode  
Text mode  
PAGE  
13 Viewing teletext  
Enlarge the text  
To the index page  
Watching TV  
PAGE  
View channel information  
Change the aspect ratio  
Hold the current page  
Switch briefly between teletext and TV  
Bookmark your favourite pages  
Reveal hidden pages  
Enjoy “Cinema Surround”  
Register your favourite channels  
12  
PAGE  
Personal preferences  
18  
Adjust the picture  
Adjust the sound  
Picture  
Advanced settings  
(sleep-timer / channel guard, etc.)  
Basic settings  
(channel settings, etc.)  
PAGE  
Watching  
videos / DVDs  
Watch high quality video (S-VIDEO)  
Switch between video and component signal  
PC position adjustments  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
After turning on the TV, it takes about 1 minute to project the picture to its normal brightness.  
After turning off the TV, it takes about 5 seconds to make the screen dark. After that, cooling down is performed for about 1 minute.  
“About the LAMP indicator” (P. 6)  
Watching TV  
Set to “TV”  
PR List  
PR List  
Channels registered in  
“Initial settings” will appear  
here.  
Channel information  
AV  
1
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
Mute  
Power on  
Channel information  
(No indication)  
select  
view  
DISPLAY  
select  
The blue power lamp on  
2
3
Select and view a channel  
Select a page  
the TV lights  
Zoom  
select  
set  
When set to “Auto”, the aspect ratio  
will turn to the ratio obtained from the  
information the TV received. Without  
receiving aspect information, it will  
be set to “4:3 Auto Aspect” (P. 19)  
Not available for 1080i (1125i) / 720p  
(750p) signals.  
Press again to turn the screen off  
and put the TV into standby mode.  
Auto  
Regular  
Panoramic  
14:9 Zoom  
16:9 Zoom  
16:9 Zoom Subtitle  
Full  
16 : 9 Zoom  
Change the aspect  
Select a channel  
ratio  
E.g.  
ZOOM  
Move the picture with  
or while this bar is  
displayed  
In PC mode, “Regular” and “Full” can  
be selected.  
1 :  
15 :  
Move up or down a channel  
High  
Low  
Mono  
Off  
: For stereo sound  
up  
Enjoy ambient  
sound  
CINEMA SURROUND  
: For stereo sound (when the sound distorts in “High” mode)  
: For mono sound (emulates a stereo-like sound)  
: Turns off “Cinema Surround”  
down  
Cinema Surround  
High  
Switch between stereo / mono / bilingual  
broadcasting  
“Stereo /  
·
” ( P. 18)  
“MENU”  
“Sound” “MaxxBass”  
Emphasize bass  
sound  
select  
High  
MAXXBASS  
level  
Note  
Off  
Low  
High  
set  
To completely turn off the TV, unplug the AC  
plug after the LAMP indicator stops blinking.  
Volume  
Registered as return channel  
Cancel  
While the channel  
is displayed  
While the channel  
is displayed  
Basic operations using the side buttons  
Always return to the  
channel you want to  
view  
Return Plus  
Programmed!  
Return Plus  
Canceled!  
Hold down for  
3 seconds  
Hold down for  
3 seconds  
Power on  
RETURN PLUS  
TV/VIDEO  
1
IN (VIDEO-4)  
S-VIDEO  
MENU/OK  
CHANNEL  
Recall the return channel  
Change the  
channel  
CHANNEL  
OVER  
VIDEO  
2
L/MONO  
+
34  
23  
VOLUME  
Return to the last  
channel you were  
viewing  
Volume  
R
-
AUDIO  
RETURN  
Current channel  
Last channel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Viewing teletext  
This TV can display TV broadcasts and teletext on the same channel in two windows.  
Hold the current page  
When watching TV  
Hold the  
1
current page  
HOLD  
Press  
again  
Release  
TV  
TEXT  
Enter a teletext page  
2
Display hidden information  
(answers to quizzes, etc)  
Reveal  
hidden pages  
TEXT  
Move up or down a page  
REVEAL  
up  
down  
View sub-pages  
Double the size of the displayed text  
.....  
Enlarge the  
text  
to sub-page  
SIZE  
(RED) (GREEN) (YELLOW) (BLUE  
)
Display your  
favourites list  
1
Select a coloured button to save your page to  
Returns to page “100” or a previously  
designated page  
To the index  
page  
2
3
4
(red)  
(green)  
(yellow)  
(blue)  
Bookmark  
your favourite  
page  
INDEX  
Enter the number of the page to save  
LIST MODE  
Leave the current page open, while you  
switch to watch TV  
Switch briefly  
from teletext  
to TV  
Save  
CANCEL  
Useful when running a page search.  
Press the coloured button as in step 2  
Recall your favourite page  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Watching videos / DVDs  
Select the video source  
Switch between video and component signal  
AV Select  
select  
1
01  
0
1
2
3
4
5
6
7
Video-1  
Video-2  
Video-3  
Video-4  
HDMI1  
HDMI2  
PC  
Display the menu bar  
1
watch  
Select “Set Up”  
Operate the connected device and play a video  
select  
2
2
Operate JVC recorders and other devices (P. 17)  
Set Up  
next  
Select the video source using the side buttons  
Select “Video-1 Setting” or “Video-3 Setting”  
3
Set Up  
TV/VIDEO  
TV/VIDEO  
select  
Auto Program  
Edit/Manual  
Language  
1
2
IN (VIDEO-4)  
MENU/OK  
Video-1 Setting  
Video-3 Setting  
AI Volume  
Video  
Video  
Off  
S-VIDEO  
Teletext Language  
HDMI Setting  
PC Position  
CHANNEL  
Select the video source  
Lamp Timer Reset  
OVER  
CHANNEL  
VIDEO  
L/MONO  
+
Change setting  
MENU/OK  
VOLUME  
R
-
3
AUDIO  
select  
set  
4
: For composite  
or S-video  
signal  
Video  
Video  
: For component  
video signal  
Component  
PC position adjustment  
Display the menu bar  
1
2
Using S-VIDEO  
If both composite and S-VIDEO cables are connected, S-VIDEO will be enable.  
Select “Set Up”  
Select “PC Position”  
Set Up  
select  
next  
select  
Auto Program  
Edit/Manual  
Language  
Video-1 Setting  
Video-3 Setting  
AI Volume  
Video  
Video  
Off  
Teletext Language  
HDMI Setting  
PC Position  
Using OUT terminal  
Component and PC signals do not come out from this terminal.  
Set Up  
next  
Lamp Timer Reset  
When you are viewing video signal, no signal will come out through the S-VIDEO terminal.  
HDMI-1 and HDMI-2 inputs does not come out from this terminal.  
Shown only when “PC” is selected.  
adjust  
>PC Position  
(blue)  
3
Reset position  
set  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
1
2
Useful functions  
select “Features”  
Still picture  
Features  
next  
Take  
Features  
Set a time for  
the TV to turn  
itself off  
select “Sleep Timer”  
snapshots of  
Current programme  
the screen  
Sleep Timer  
Channel Guard  
Appearance  
Blue Back  
Type A  
On  
3
Cancel  
FREEZE  
Child Lock  
On  
Auto Shutoff  
Favourite Setting  
Illumination  
On  
SLEEP TIMER  
Press “ ” again, or change the channel  
Bright  
On  
next  
Power Lamp  
Not available when the Sub-picture (below) is displayed, or when  
in PC mode.  
You cannot save or export the snapshot.  
>
Sleep Timer  
select a time in minutes  
Off  
4
set  
Select the number  
of screens  
Cancel Set the time to “0” in step 4  
You can confirm the remaining time in step 4, after  
repeating this process.  
Remaining time  
select  
After steps 1 and 2 above  
set  
Features  
select  
“Channel Guard”  
Sleep Timer  
Channel Guard  
Appearance  
Selecting “  
returns to normal viewing mode  
Type A  
On  
3
Blue Back  
Child Lock  
On  
Not available in PC mode.  
Auto Shutoff  
Favourite Setting  
Illumination  
Power Lamp  
On  
Bright  
On  
Watch in dual-picture mode  
E.g. You can watch TV and video at the same time.  
>
Set ID No.  
enter an “ID No.”  
(a secret number of your choice)  
(For wide aspect ratio signals)  
4
5
to the next column  
set  
Main  
Main  
Sub  
Sub  
Watch in  
multi-picture  
mode  
>>Channel Guard  
select a channel to lock  
Stop children  
from watching  
specific  
PR  
AV  
01  
CH/CC  
ID  
Switch between the  
sound sources  
Change the channel  
(Main)  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
02  
03  
04  
05  
06  
MULTI-PICTURE  
channels  
CHANNEL GUARD  
>>Channel Guard  
(Sub)  
(blue)  
Lock more channels  
Repeat steps 5 and 6  
PR  
AV  
01  
CH/CC  
ID  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CC 02  
02  
03  
04  
05  
06  
Select a channel in 12-screen mode  
All registered channels are displayed as still images.  
6
7
select a channel  
Main  
watch  
Press “(blue)” again in step 6  
Only the selected frame has a  
moving picture.  
Release a channel  
View a locked channel  
Use the numerical buttons to enter the  
channel number. When appears, press  
Move up or down a page  
Not available for HDMI-1 or HDMI-2 input.  
” and enter your “ID No.”. (If you forget  
your “ID No.” check it in step 4.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
(continued)  
Useful functions  
“MENU”  
“Features” “Blue Back”  
select  
While the channel is  
displayed  
On  
Off  
On  
1
: Function is  
turned off  
: Displays a  
blue screen  
Displays a  
blue screen  
and mute the  
sound when  
the signal is  
weak  
set  
Hold down for  
3 seconds  
SET  
1 - 4?  
Press the number to  
register it on  
12  
12  
BLUE BACK  
2
PROGRAMMED!  
Disappears in a few seconds  
When the signal is weak or  
absent  
Displays a blue screen and  
mute the sound  
Recall the favourite channel  
1
“MENU”  
“Features” “Auto Shutoff”  
select  
FAVOURITE 1 - 4?  
Register a  
channel to a  
button  
FAVOURITE  
CHANNEL  
On  
Off  
On  
Press the number you  
registered  
1
: Function is  
turned off  
: Set the  
power to  
turn off  
Set the power  
to turn off if  
no signal is  
received and  
no operation  
is performed  
2
set  
Customizations (P. 18) to the picture of a favourite channel get  
saved as well.  
AUTO  
SHUTOFF  
Check your favourite channels  
Press “ ” and confirm that the channels you have registered have  
marks beside them  
When no signal is received  
and no operation is performed  
for about 15 minuites  
The power turns off  
Delete a favourite channel  
“MENU”  
“Features”  
“Favourite Setting”  
1
2
> Favourite Setting  
select  
1
2
3
4
PR 01  
PR 03  
PR 05  
PR 07  
“MENU”  
“Set Up” “AI Volume”  
select  
Prevent  
sudden  
increase or  
decrease of  
sound when  
changing  
channels  
On  
Off  
On  
delete  
(blue)  
> Favourite Setting  
1
: Function is  
turned off  
: Set to  
prevent  
set  
PR 01  
2
3
4
PR 03  
sudden  
increase or  
decrease of  
sound  
PR 07  
AI VOLUME  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Operate JVC recorders and other devices  
The included remote control can be used to operate JVC recorders and other devices.  
Select a device  
1
VCRs  
DVD recorders  
HDD recorders  
Operate DVD / HDD recorder menues  
Display menu  
Playback / Record etc.  
Home theater  
system  
Rewind / Playback  
/ Fast-forward  
Operate the  
VCR, DVD  
Select  
Record / Stop / Pause  
recorder or  
TV (P. 12)  
DVD players  
HDD recorder  
VCR/DVR  
Display top menu  
Back to previous  
menu  
OK  
TV  
VCR/DVR  
Select a chapter  
Display the subtitle (DVD / HDD recorder mode)  
Operate DVD menues  
AUDIO  
DVD  
The indicator lights for 3 seconds each time  
the remote control is operated.  
Playback etc.  
Display menu  
Rewind / Playback  
/ Fast-forward  
Turn on the device  
Select  
2
3
Operate the  
DVD player  
Stop / Pause  
DVD  
Display top menu  
Back to previous  
menu  
OK  
Select a chapter  
Operate the device  
Other buttons can be used to operate the TV  
at any time.  
Display the subtitle  
Playback etc.  
Operate AUDIO menues  
Try changing the remote control code if you  
cannot operate a recorder.  
Display menu  
Rewind / Playback  
/ Fast-forward  
Select  
Code A or 1 (Default)  
Code C or 3  
Stop / Pause  
Operate the  
home theatre  
system  
Display top menu  
Back to previous  
menu  
Press and hold  
Press and hold  
OK  
Select a chapter  
AUDIO  
Display the subtitle  
Mute  
Confirm the code for your recorder by checking the manual it came with.  
Some models of JVC devices cannot be operated with this remote control.  
JVC DVD recorders and HDD recorders are set to code “C” or “3” by default.  
Volume  
Note  
Select a surround mode  
If the battery is removed, the remote control code reverts back to code A or 1.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Menu  
Item  
Picture Mode  
Iris  
Adjustments / Configurations  
Picture mode (Bright / Standard / Soft)  
Customizing your TV  
Adjust the amount of light projected on the screen (Darker  
Brighter)  
Contrast (Lower  
Brightness (Darker  
Sharpness (Softer  
Colour (Lighter  
Higher)  
Brighter)  
Sharper)  
Deeper)  
Greenish)  
Contrast  
Bright  
Display the menu bar  
1
Sharp  
Colour  
Tint for NTSC (Reddish  
Tint  
Select a menu  
Selected menu’s title  
Colour temperature (Warm / Mid / Cool)  
Finer picture adjustments (P. 19)  
White Balance  
Features  
select  
2
Picture  
Picture  
Sound  
Features  
Set Up  
Mode / Language ( : Mono /  
: Stereo / : Sub1 / : Sub2 / MONO)  
Stereo /  
·
next  
Low tones (Weaker  
High tones (Weaker  
Stronger)  
Stronger)  
Bass  
Treble  
Balance  
Select an item  
Speaker balance (Left Stronger  
Right Stronger)  
select  
3
Ambience level (High / Low / Mono / Off)  
Cinema Surround  
*1  
Emphasize the bass sound (Off / Low / High)  
Sound enhancement technology (On / Off)  
Timer for turning off the TV (P. 15)  
MaxxBass  
Voice Enhancer  
Sleep Timer  
Stops children from watching specific channels (P. 15)  
Format for displaying the channel number (TYPE A / TYPE B)  
Channel Guard  
Appearance  
To the previous  
screen  
Items  
Displays a blue screen and mutes the sound when the signal is weak or  
absent (P. 16)  
Blue Back  
Adjust / Configure  
adjust /  
Disables the front control buttons of the TV (On / Off)  
Child Lock  
4
select  
Set the power to turn off if no signal is received and no operation is performed  
for about 15 minuites. (P. 16)  
Standard  
Exit  
Picture Mode  
Auto Shutoff  
Favourite Setting  
Illumination  
Clear favourite channel settings (P. 16)  
set  
Change the brightness of the Power lamp (P. 6) while the TV is on  
(Bright / Soft)  
The menu disappears  
after one minute of  
inactivity.  
Automatically registers channels (P. 8,  
)
Auto Program  
Edit / Manual  
Language  
When adjusting with the sliding-bar  
Change registered channels or add new ones (P. 9)  
adjust  
set  
Select a language for on-screen menus (P. 8,  
For use with VCRs and other devices (P. 14)  
For use with VCRs and other devices (P. 14)  
)
Video-1 Setting  
Video-3 Setting  
Move  
Prevent sudden increase or decrease of sound when changing channels  
(P. 16)  
AI Volume  
Select a language for Teletext programmes (P. 22)  
Teletext Language  
HDMI Setting  
When selecting from presets  
HDMI-1 : Size (1 / 2 / Auto) HDMI-2 : Size (1 / 2 / Auto)  
Audio (Digital / Analogue / Auto)  
select  
set  
PC position adjustment (P. 14)  
Resets the lamp timer (P. 5)  
PC Position  
Standard  
The item will change.  
Lamp Timer Reset  
· Change the aspect ratio “ZOOM” (P. 12)  
· Turn on “Cinema Surround” “CINEMA SURROUND” (P. 12)  
Other settings  
Some items have a sub-menu.  
*1 MaxxBass is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Advanced picture adjustment  
By default, the TV automatically adjusts itself for the best picture.  
Off  
Min  
Max  
Auto  
For smooth  
Super  
: Function is  
turned off  
: When the  
picture loses  
sharpness  
: When  
much noise  
appears  
: Automatically  
adjusts  
Auto  
Display the menu bar  
DigiPure  
looking picture  
1
2
Off  
On  
Auto  
: Function is  
turned off  
: Function is  
always on  
: Automatically  
adjusts  
For smoothing  
cinema film  
Pull Down  
Auto  
On  
Select “Picture”  
select  
Picture  
Off  
On  
: Function is  
turned off  
: Maintains a natural  
colour balance  
Colour  
Management  
For natural-  
looking pictures  
next  
Select “Features”  
Select an item  
select  
Off  
On  
3
4
: Function is  
turned off  
: Makes it easier to view  
bright / dark pictures  
Fix bright /  
Picture  
On  
Management dark pictures  
next  
Not available when  
“Picture Mode” is set to  
“Bright” (P. 18)  
Off  
On  
Advanced  
Fix brightness  
Smart  
: Function is  
turned off  
: Make it easier to  
view white areas  
On  
On  
select  
next  
of white areas  
Picture  
To the previous  
screen  
Off  
On  
To reduce  
MPEG video  
noise  
E.g. “Super DigiPure”  
MPEG  
: Function is  
turned off  
: When noise  
appears  
Noise  
Reduction  
Change settings  
Exit  
select  
5
6
1
Select the screen to change settings for  
Main Sub  
: Main picture  
Auto  
>> Colour System  
Super DigiPure  
: Sub-picture in MULTI-PICTURE mode  
(P. 15)  
The menu disappears  
after one minute of  
inactivity.  
Main  
Sub  
Auto  
PAL  
E.g. “Super DigiPure”  
When there is  
no colour  
Colour  
System  
2
Select the colour system  
PAL SECAM  
NTSC 3.58  
NTSC 4.43  
Auto  
Finish  
For colour system in your country or region.  
“Colour system in your country or region” (P. 22)  
Select a default aspect ratio for Auto in “Zoom” (P. 12)  
>> 4:3 Auto Aspect  
Panoramic  
Regular  
14:9 Zoom  
Panoramic  
Regular  
Set a default  
aspect ratio  
4:3 Auto  
Aspect  
14:9 Zoom  
16 : 9  
4 : 3  
14 : 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Troubleshooting  
Problem  
Actions  
page  
Severe noise or snow  
Unplug the TV, and wait about 1 hour until the lamp  
completely cooled. Then plug the TV in again. (Turning on the  
TV soon may shorten the lamp life.)  
Remote control stops  
working  
-
Front control buttons do  
not work  
Switch “Child Lock” to “Off.”  
18  
12  
Is the TV connected correctly to the  
aerial?  
Change the direction of the aerial.  
Is the aerial or its cable damaged?  
Consult your retailer  
Aspect ratio changes  
unintentionally  
Press “  
” to return to your settings.  
Although the HD-ILA element is manufactured with high-  
precision technology, please understand that some pixels  
may be lost or permanently displayed.  
Black or white dots  
-
appear on the screen  
Patterns, stripes or  
noise  
I can’t turn it on!  
Is the power cord connected to the AC  
outlet correctly?  
PC screen alignment is  
off  
Adjust the “PC Position.”  
Adjust the “Iris” brighter.  
14  
18  
The screen is dim  
Is the aerial receiving interference  
from high-voltage power lines or  
wireless transmitters?  
Consult your retailer  
Are connected devices too close to  
the TV?  
Insert the minimum distance  
between the aerial and the cause  
of interference until no interference  
Unnatural colour >>> Adjust “Colour” and “Bright.”  
Check your “Colour System.”  
18  
19  
If “Auto” is selected, select the specific  
colour system manually.  
Noise >>> Set to the following functions.  
-
18  
19  
-
18  
19  
Poor picture quality  
Picture Mode :  
Standard  
Super DigiPure : Max  
Dull picture >>> Set to the following functions.  
Picture Mode :  
Bright  
Ghosting  
Super DigiPure : Min  
The remote  
(Doubling of images)  
control doesn’t  
work!  
Are the batteries flat?  
If the top of the image is distorted, check the video signal  
quality itself.  
If movement appears unnatural when receiving a signal from  
a DVD player, etc. with 625p (progressive-scanning), change  
the output setting of the external device to 625i (interlace-  
scanning).  
-
-
Are you more than 7 metres away from the TV?  
Is the “MODE (TV, VCR/DVR, DVD, AUDIO)” set to “TV”?  
When viewing teletext, the TV menu bar does not appear.  
Depending on the stability of the signal, there may be a time  
lag when changing channels.  
Strange picture when  
using an external device  
Are you receiving interference from  
signals reflected off mountains or  
buildings?  
Adjust the direction of your aerial,  
or change to a good-quality  
directional aerial  
Blue screen appears on  
the screen  
Switch “Blue Back” to “Off.”  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Problem  
Actions  
page  
Problem  
Actions  
page  
Keep the TV off for a while and then turn the power on  
again. If the TV goes into warning mode, unplug the TV  
after the cooling has completed and consult your retailer. (It  
may be a malfunction of the internal electrical circuits.)  
Adjust the “Bass” and “Treble.”  
18  
18  
9
If receiving a poor signal in “Stereo /  
·
”, switch to “Mono.”  
Poor sound  
The LAMP indicator  
blinks rapidly  
-
Adjust the channel reception using “Manual.”  
“Voice Enhancer” does  
not work  
“AI Volume” makes the effect of “Voice Enhancer” weak.  
Switch “AI Volume” to “Off.”  
18  
Keep the TV off for a while and then turn the power on  
again. If the TV goes into warning mode, unplug the TV  
after the cooling has completed and consult your retailer.  
(The internal temperature rises abnormally or the fan may  
be blocked.)  
The power lamp and  
LAMP indicator blink  
alternately  
-
Switch “Size” in “HDMI Setting” to “1” or “2.”  
Use the cable with HDMI logo.  
Wrong screen size  
18  
No picture, no sound  
-
If this condition occurs soon after replacing the lamp,  
reinstall the new lamp unit. (The lamp unit may not be  
inserted into the lamp housing correctly.)  
Repeat the lamp installation steps, taking care to observe  
all warnings.  
- Make sure the lamp sits flat inside the housing area.  
- Make sure the lamp cover is reinstalled.  
If this condition occurs except for replacing the lamp, keep  
the TV off for a while and then turn the power on again. If  
the TV goes into warning mode, unplug the TV after the  
cooling has completed and consult your retailer. (It may be  
a lamp malfunction.)  
6
Check if the device is compliant with HDMI.  
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for  
HDMI devices, or “Analogue” or “Auto” for DVI devices.  
(Not available for HDMI-2)  
The power lamp and  
LAMP indicator blink  
rapidly simultaneously  
-
18  
No sound  
-
Green and distorted  
screen  
Wait a little for the signal to stabilize when switching the  
signal format for an “HDMI” device.  
-
-
Some functions do not  
work  
It is not a malfunction. Some functions (dark background) in  
the menu do not work depending on the situation.  
Some inputs cannot  
be selected in the sub-  
picture  
“VIDEO-1 (Component signal)”, “VIDEO-3 (Component  
signal)”, “HDMI-1”, “HDMI-2” inputs and PC mode cannot be  
selected in the sub-picture.  
-
14  
Some inputs are not output from the OUT terminal.  
No picture, no sound  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Technical information CH/CC List  
To use the INSERT function (P. 9), find the “CH/CC” number corresponding to the TV’s Channel number from this  
Language group for teletext  
table.  
Group  
Languages  
US:  
CCIR:  
OIRT:  
The US channel numbers are the channel numbers used in the United States, Philippines, etc.  
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.  
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.  
Group-1  
Group-2  
Group-3  
Group-4  
Group-5  
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish  
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian, Swedish, Finnish  
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian, Slovenian, Czech, Slovak, English, German  
Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish, Finnish  
Farsi, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish, Finnish  
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.  
If the characters are unreadable. Select different teletext language group.  
Channel  
R1  
Channel  
CH  
CH 02  
CC  
CC 01  
US  
US-02  
CCIR  
OIRT  
AUSTRALIA  
AU-0  
US  
CCIR  
OIRT  
AUSTRALIA  
AU-5  
E2  
S-1  
Colour system in your country or region  
CH 03  
CH 04  
CH 05  
CH 06  
CH 07  
CH 08  
CH 09  
CH 10  
CH 11  
CH 12  
CH 13  
CH 14  
CH 15  
CH 16  
CH 17  
CH 18  
CH 19  
CH 20  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CH 26  
CH 27  
CH 28  
CH 29  
CH 30  
CH 31  
CH 32  
CH 33  
CH 34  
CH 35  
CH 36  
CH 37  
CH 38  
CH 39  
CH 40  
CH 41  
CH 42  
CH 43  
CH 44  
CH 45  
CH 46  
CH 47  
CH 48  
CH 49  
CH 50  
CH 51  
CH 52  
CH 53  
CH 54  
CH 55  
CH 56  
CH 57  
CH 58  
CH 59  
CH 60  
CH 61  
CH 62  
CH 63  
CH 64  
CH 65  
CH 66  
CH 67  
CH 68  
CH 69  
US-03  
US-04  
US-05  
US-06  
US-07  
US-08  
US-09  
US-10  
US-11  
US-12  
US-13  
US-14, W+29  
US-15, W+30  
US-16, W+31  
US-17, W+32  
US-18, W+33  
US-19, W+34  
US-20, W+35  
E3  
E4  
E5  
E6  
E7  
E8  
E9  
E10  
E11  
E12  
AU-1  
AU-2  
AU-6  
AU-7  
AU-8  
AU-9  
CC 02  
CC 03  
CC 04  
CC 05  
CC 06  
CC 07  
CC 08  
CC 09  
CC 10  
CC 11  
CC 12  
CC 13  
CC 14  
CC 15  
CC 16  
CC 17  
CC 18  
CC 19  
CC 20  
CC 21  
CC 22  
CC 23  
CC 24  
CC 25  
CC 26  
CC 27  
CC 28  
CC 29  
CC 30  
CC 31  
CC 32  
CC 33  
CC 34  
CC 35  
CC 36  
CC 37  
CC 38  
CC 39  
CC 40  
CC 41  
CC 42  
CC 43  
CC 44  
CC 45  
CC 46  
CC 47  
CC 48  
CC 49  
CC 50  
CC 51  
CC 52  
CC 53  
CC 54  
CC 55  
CC 56  
CC 57  
CC 58  
CC 59  
CC 60  
CC 61  
CC 62  
CC 63  
CC 64  
CC 75  
CC 76  
CC 77  
CC 78  
CC 79  
CC 95  
CC 96  
CC 97  
CC 98  
CC 99  
S-2  
S-3  
S-4  
S-5  
S-6  
S-7  
S-8  
S-9  
R2  
R6  
R7  
R8  
R9  
Area  
Country or Region  
System  
PAL  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, India, etc.  
AU-5A  
China, Vietnam, etc.  
Asia, Middle East  
Hong Kong, etc.  
R10  
R11  
R12  
AU-10  
AU-11  
SECAM  
NTSC  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
S-10  
S-11  
S-12  
S-13  
S-14  
S-15  
S-16  
S-17  
S-18  
S-19  
S-20  
S-21  
S-22  
S-23  
S-24  
S-25  
S-26  
S-27  
S-28  
S-29  
S-30  
S-31  
S-32  
S-33  
S-34  
S-35  
S-36  
S-37  
S-38  
S-39  
S-40  
S-41  
SECAM  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
W+1  
W+2  
W+3  
W+4  
W+5  
W+6  
W+7  
W+8  
W+9  
W+10  
W+11  
W+12  
W+13  
W+14  
W+15  
W+16  
W+17  
W+18  
W+19  
W+20  
W+21  
W+22  
W+23  
W+24  
W+25  
W+26  
W+27  
W+28  
PAL  
PAL  
PAL  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
US-21, W+36 E21  
US-22, W+37 E22  
US-23, W+38 E23  
US-24, W+39 E24  
US-25, W+40 E25  
US-26, W+41 E26  
US-27, W+42 E27  
US-28, W+43 E28  
US-29, W+44 E29  
US-30, W+45 E30  
US-31, W+46 E31  
US-32, W+47 E32  
US-33, W+48 E33  
US-34, W+49 E34  
US-35, W+50 E35  
US-36, W+51 E36  
US-37, W+52 E37  
US-38, W+53 E38  
US-39, W+54 E39  
US-40, W+55 E40  
US-41, W+56 E41  
US-42, W+57 E42  
US-43, W+58 E43  
US-44, W+59 E44  
US-45, W+60 E45  
US-46, W+61 E46  
US-47, W+62 E47  
US-48, W+63 E48  
US-49, W+64 E49  
US-50, W+65 E50  
US-51, W+66 E51  
US-52, W+67 E52  
US-53, W+68 E53  
US-54, W+69 E54  
US-55, W+70 E55  
US-56, W+71 E56  
US-57, W+72 E57  
US-58, W+73 E58  
US-59, W+74 E59  
US-60, W+75 E60  
US-61, W+76 E61  
US-62, W+77 E62  
US-63, W+78 E63  
US-64, W+79 E64  
US-65, W+80 E65  
US-66, W+81 E66  
US-67, W+82 E67  
US-68, W+83 E68  
US-69, W+84 E69  
SECAM  
Egypt, Morocco, etc.  
Sound system in your country or region  
Area  
Country or Region  
System  
B/G  
D/K  
I
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, India, etc.  
China, Vietnam, etc.  
Asia, Middle East  
Hong Kong, etc.  
B/G  
M
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
D/K  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
B/G  
I
B/G  
I
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
B/G  
Egypt, Morocco, etc.  
Monoaural sound  
Use this function when stereo sound or bilingual sound is hard to hear.  
Set “Stereo /  
·
” to “Mono.” (P. 18)  
PC Signals that can be displayed  
If the signal doesn’t appear, check that the vertical  
frequency on the PC is set to 60 Hz.  
Resolution  
640 x 480 (VGA) 1024 x 768 (XGA)  
Vertical frequency (Hz)  
Horizontal frequency (kHz)  
60.0  
31.5  
60.0  
48.4  
X
Y
Z
Z+1  
Z+2  
Connect DVI devices  
Connect a “DVI“ device to “HDMI-1” using “DVI-HDMI” conversion cable. Connect analogue sound output of the  
DVI device to L and R terminals in IN HDMI-1.  
Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 18)  
HDMI-2 input does not support analogue sound (IN HDMI-1).  
HDMI-2 input does not support DVI devices.  
R3  
R4  
R5  
AU-3  
AU-4  
A-5  
A-4  
A-3  
A-2  
A-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Specifications  
Main unit  
Terminals / Connectors  
Terminal name  
Terminal type  
Signal type (IN)  
Signal type (OUT)  
Model  
HD-Z70RF7  
HD-Z61RF7  
HD-Z56RF7  
Composite video, S-video,  
Analogue component  
(576i (625i) / 480i (525i),  
Broadcasting systems  
Colour systems  
B / G / I / D / K / K1 / M (See “Technical information”, P. 22)  
PAL, SECAM, NTSC 3.58/4.43MHz  
VHF low channel (VL) = 46.25 to 140.25 MHz  
VHF high channel (VH) = 147.25 to 423.25 MHz  
UHF channel (U) = 431.25 to 863.25 MHz  
· Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to  
S20) and hyper band (S21 to S41).  
NICAM (I / B / G / D / K), A2 (B / G / D / K)  
FLOF (Fastext), WST (standard system)  
AC 110 V - 240 V, 50/60 Hz  
RCA connectors x 6  
S-VIDEO connector x 1 Progressive : 576p (625p) / 480p (525p),  
VIDEO-1  
HD : 1080i (1125i), 720p (750p)  
Audio L / R  
Composite video, S-video,  
)
Channels and frequencies  
RCA connectors x 3,  
S-VIDEO connector x 1 Audio L / R  
VIDEO-2  
Composite video,  
Sound-multiplex systems  
Teletext systems  
Analogue component  
(576i (625i) / 480i (525i),  
VIDEO-3  
RCA connectors x 6  
RCA connectors x 3,  
S-VIDEO connector x 1 Audio L / R  
HDMI  
Input terminals  
Progressive : 576p (625p) / 480p (525p),  
Power requirements  
HD : 1080i (1125i), 720p (750p)  
)
Audio output (Rated power output) 10 W + 10 W  
Audio L / R  
Speakers  
10 cm round x 2  
(8.5 x 12.5cm) oval x 2  
Composite video, S-video,  
VIDEO-4  
HDMI-1  
HDMI-2  
195 W  
Power consumption  
[standby]  
[0.9 W]  
(576i (625i) / 480i (525i) /  
576p (625p) / 480p (525p),  
1080i (1125i), 720p (750p))  
Audio L / R  
Analogue PC signal (P. 22)  
Screen size  
(
HDMI connector x 2  
178 cm  
155 cm  
142 cm  
visible area size measured diagonally)  
Dimensions (W x H x D: mm)  
Weights  
1626 x 1167 x 519  
1403 x 1015.5 x 483.6  
1292 x 943.5 x 449.8  
IN HDMI-1  
PC IN  
RCA connectors x 2  
D-SUB (15 pins) x 1  
g
g
g
40 k  
72 k  
44 k  
Accessories  
(See “Check accessories”, P. 6)  
Composite video  
,
RCA connectors x 3,  
S-VIDEO connector x 1  
OUT  
S-video,  
Output  
Audio L / R  
terminals  
Stereo mini-jack x 1  
(3.5 mm in diameter)  
Headphone  
output  
Headphone  
We may change the design and specifications without notice.  
Demonstration  
To start the demonstration:  
Press the MENU button to display the menu bar. Then press the yellow button.  
Select DEMO 1 (Super Digipure), DEMO 2 (Maxx Bass) or DEMO 3 (Iris Meter) from the DEMO MODE  
menu.  
Press the  
/
buttons, then press the OK button.  
To quit the demonstration:  
Press the yellow button, BACK button, CHANNEL  
/
buttons or any of the number buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
C
2006 Victor Company of Japan, Limited  
0706TKH-MW-VP  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Life Jacket SC5300 User Manual
JBL DJ Equipment CSA 2120 User Manual
JVC Flat Panel Television DT X71C User Manual
JVC Portable CD Player XL PR1BK User Manual
Kambrook Can Opener KEC10 User Manual
Kambrook Electric Cookie Press KCP100 User Manual
Karcher Pressure Washer G 2600 PC User Manual
Karcher Pressure Washer KB 2020 User Manual
KitchenAid Ice Maker W10493416C User Manual
Korg Electronic Keyboard 2GFEJ User Manual