JVC Flat Panel Television AV 29VT15 User Manual

COLOR TELEVISION  
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT  
Contents  
Knowing your TV’s features ....................................................... 3  
Remote control buttons and basic functions .............................. 4  
TV buttons and functions ........................................................... 6  
Setting up your TV ..................................................................... 7  
Basic setting for picture.............................................................. 9  
Advanced setting for picture .....................................................11  
Basic setting for sound............................................................. 12  
Advanced setting for sound ..................................................... 13  
Favorite channel and video setting .......................................... 14  
Customized setting .................................................................. 15  
TV channel presetting .............................................................. 17  
Additional preparation .............................................................. 18  
Troubleshooting ....................................................................... 20  
Specifications ........................................................................... 21  
AV-29VT15  
AV-29VT35  
AV-21VT15  
AV-21VT35  
AV-21YT15  
AV-25VT15  
INSTRUCTIONS  
GGT0082-001A-H  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Knowing your TV’s features  
Main features  
MTS  
You can listen to the stereo sound or SAP from TV program broadcasting by MTS system.  
(SAP: Second audio program.)  
CLOSED CAPTION  
You can display dialog on the screen from TV broadcasting with Closed Caption system.  
You may also be able to display some information in text form if available.  
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.  
AI ECO  
AI VOLUME  
VNR  
TV detects the brightness of your room and automatically adjust the picture brightness to a  
suitable level for a better eye care.  
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden  
change of the volume when selecting different TV channel.  
You can reduce the picture noise when viewing noisy TV programs or video sources.  
Confirm your TV’s functions  
1
Some functions written in this instruction manual may not be available for your TV.  
Please see the chart below and check the functions that are equipped for your TVs model number. The  
model number is indicated at the rear of your TV. When you press a button concerned to a function that is  
not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is  
not available for your TV, it is not displayed in the menu.  
2
Model No.  
No.  
Function  
1
2
*ECO  
_
_
_
_
_
_
_
_
*BASS  
PICTURE TILT  
COMPRESS (16:9)  
_
_
_
_
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and basic functions  
No. Press  
To  
1
2
3
4
5
6
7
POWER  
MENU/OK  
Turn on or off the TV from standby mode.  
Display menu and confirm selected function.  
5 / / 2 / 3 Select and adjust menu function.  
CHANNEL -/+ Select the desired channel number.  
VOLUME -/+ Adjust the volume level.  
TV/VIDEO  
MUTING  
Select TV or video terminal input.  
Turn off the volume.  
Press this button again to resume the volume.  
8
DISPLAY/BACK Display the program number or video terminal number on the screen.  
On the other hand, you can use this button to return to the previous menu.  
9
!
CLOSED CAPTION Display information in text which are broadcasted by some TV channels.  
0~9, 100+  
Select the program number. For three digits program number, press 100+, then press the  
number button.  
+
"
RETURN  
a) Return to the frequently view channel with one touch.  
1 Choose the channel you want to register.  
2 Press and hold RETURN+ button until RETURN PLUS PROGRAMMED!appears.  
To cancel, press and hold RETURN+ button until RETURN PLUS CANCELED!appears.  
b) Return to the previously viewed channel, if you have not set or have canceled the Return  
channel as above.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and basic functions (continued)  
How to operate menus and menus locations  
Top menu  
MENU INPUT  
2nd menu  
EXT. INPUT  
DISPLAY  
CLOSED CAPTION P.15  
PICTURE MODE P.9  
Location 3rd menu  
Location  
P.16  
P.16  
To  
Operation  
Note  
Display the MENU Press the MENU/OK button 2.  
To exit the MENU,  
press the DISPLAY/  
BACK button* 8 or  
choose EXIT menu.  
PICTURE  
*If you want to  
adjust PICTURE  
SETTING menu,  
you must set  
PICTURE SETTING P.10  
WHITE BALANCE P.10  
Display the top  
menu  
Press 5/buttons 3 to choose a Press button 3 to  
menu title. Then press MENU/OK display the next page  
PICTURE  
VNR  
P.15  
button 2.  
for more functions.  
FEATURES  
PICTURE MODE  
menu to USER.  
FAVORITE CH SETTING P.14  
VIDEO SETTING  
COLOR SYSTEM  
Display the 2nd  
menu  
Press 5/buttons 3 to choose a  
menu title. Then press MENU/OK  
button 2.  
P.14  
P.9  
COMPRESS (16:9) P.11  
Display the 3rd  
menu  
Press 5/buttons 3 to choose a  
menu title. Then press MENU/OK  
button 2.  
PICTURE TILT  
P.11  
SOUND  
AI VOLUME  
MTS  
SOUND MODE  
EQUALIZER  
BALANCE  
P.13  
P.13  
P.12  
P.13  
P.12  
P.12  
Return to the  
previous menu  
Press the DISPLAY/BACK button*  
8.  
*If you want to  
adjust  
EQUALIZER  
menu, you must  
set SOUND  
MODE menu to  
USER.  
Press the MENU/OK  
button 2 to exit from  
Choose the setting Press 5/buttons 3 to choose  
of a function  
a function. Then press the 2/3  
buttons 3 to change the setting. the menu.  
SOUND TURBO  
CINEMA SURROUND P.13  
Adjust the effect  
level of a function  
Press 5/buttons 3 to choose  
a function. Then press the 2/3  
buttons 3 to adjust the effect  
level.  
SUPER BASS  
OFF TIMER  
CHILD LOCK  
AI ECO SENSOR P.11  
AUTO PROGRAM P.17  
CHANNEL SUMMARY P.17  
LANGUAGE  
BLUE BACK  
AUTO SHUTOFF  
P.12  
P.15  
P.15  
FEATURES  
Display the sub  
Press the 5/buttons 3 to  
menu of a function. choose a function. Then press  
MENU/OK buttons 2 to display  
the sub menu.  
INSTALL  
The following chart shows locations of functions in menus. In this manual,  
location of a function is described as follows:  
P.16  
P.11  
P.16  
2nd menu  
MENU  
Top menu  
MENU  
2nd menu  
Top menu  
3rd menu  
VIDEO-2 SETTING P.16  
AI ECO DISPLAY P.11  
Note: Some functions have the 4th menus as the sub-menus.  
EXIT  
* To exit the menu, the on screen display will show BACK indicated in  
blue. But it doesnt refer to the blue button on the remote control.  
Instead, it refers to the DISPLAY/BACK button on the remote control.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV buttons and functions  
The illustrations shown below is for AV-29VT35 and  
AV-21YT15 only, which are used for explanation  
purpose.  
No. Button/terminal Description  
Page  
1
2
L (main power) Press to turn on or turn off the TVs main power.  
POWER lamp  
Indicate the TV is being turned on or off.  
Your TV may not look exactly the same as illustrated.  
No color: TVs main power is being turned off.  
Red:  
TVs main power is being turned on.  
Front of the TV  
Note: When you turn off the power switch while TV is in standby  
mode, the light of power lamp will be off in 10 -15 seconds.  
AV-29VT35  
3
4
5
6
7
8
9
ECO sensor  
!
9
8
7
6
5
43  
2
1
Remote control sensor  
TV/ VIDEO  
VOLUME -/+  
CHANNEL -/+  
MENU  
IN (VIDEO-3)  
IN (VIDEO-2)  
Press to select TV or video mode.  
Press to adjust the volume level.  
Press to select the desired channel.  
Press to display the menu.  
Video and audio input jacks for VIDEO-3 mode.  
Video and audio input jacks for VIDEO-2 mode.  
Headphone jack.  
Aerial socket.  
Video and audio output jacks. (The component video  
signal cannot be output.)  
POWER  
V
L/MONO  
R
MENU  
OK  
CHANNEL  
VOLUME TV/VIDEO  
EXIT  
IN (VIDEO-3)  
18  
18  
18  
7
AV-21YT15  
!
9
8
9
6
4
( 2  
1
!
"
#
OUTPUT  
TIMER POWER  
MENU  
OK  
CHANNEL  
VOLUME  
V
L
/
MONO  
R
18  
IN (VIDEO-2)  
$
COMPONENT  
Video or component video, and audio input jacks for  
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting  
the VIDEO-2 SETTINGfunction (see page 16).  
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1 mode  
BASS SPEAKER OUT Twin Port Bass Blaster Unit output terminal.  
18  
7
19  
Rear of the TV  
%
&
(
AV-21YT15  
AV-29VT35  
TIMER lamp  
Indicate the OFF TIMER function is being turned on or off. –  
No color : The OFF TIMER function is being turned off.  
Orange : The OFF TIMER function is being turned on.  
COMPONENT  
VIDEO-1  
VIDEO-1  
INPUT  
(VIDEO-2)  
INPUT  
OUTPUT  
OUTPUT  
INPUT  
S
OVER  
V
How to operate the menus with the TV button  
V
L
Y
/
V
L
V
L
V
Work as same as the button on the  
TV button  
BASS  
SPEAKER  
OUT  
Note  
L
L
C
C
B
/
/
MONO  
MONO  
remote control unit  
/
MONO  
R
R
R
R
R
R
MENU  
MENU/OK button  
To display main menu and exit  
menu after finish setting.  
CHANNEL -/+ /5 button  
VOLUME -/+ 2/3 button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select menu function.  
& %  
#
"
$
#
"
%
To adjust the desired function.  
6
Setting up your TV  
CAUTION  
Turn off the equipment including the TV before connecting.  
1 Connecting the aerial cable.  
2 Connecting the compatible main plug to the AC outlet.  
VHF/UHF outdoor aerial  
75-ohm coaxial cable (not supplied)  
3 Inserting batteries into the remote control.  
Insert two batteries by following the + and -  
polarities and inserting the - end first.  
CAUTION:  
If you connect a VCR, connect the aerial output jack of your VCR  
and the aerial jack on the TV with the aerial cable. Then connect the  
output jacks of your VCR and the VIDEO-1 input jacks of the TV  
with the video cable (or S-VIDEO cable if available) and audio  
cables. For details, see the manual of your VCR.  
Follow the cautions printed on the batteries.  
Notes:  
Use AA/R6/UM-3 dry cell batteries.  
It the remote control does not work properly, fit  
new batteries. The supplied batteries are for  
testing, not regular use.  
Rear of TV  
COMPONENT  
VIDEO-1  
(VIDEO-2)  
INPUT  
OUTPUT  
INPUT  
S
OVER  
V
4 Turn on the TV by pressing the main power button.  
V
L
Y
/
V
JVC logo appears on the screen.  
L
L
CB  
/
/
MONO  
MONO  
To video  
output  
To audio  
output  
To RF  
output  
C
R
R
R
R
To S-video  
output  
VCR  
To aerial input  
The illustration shown is just a sample. It may not be same as your  
TV.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your TV (continued)  
5 Making the initial settings  
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following steps as below:  
LANGUAGE  
AUTO PROGRAM  
CHANNEL SUMMARY  
AUTO PROGRAM  
AUTO PROGRAM  
ENGLISH  
ESPAÑOL  
PORTUGUÊ  
CH/CC SKIP  
AIR  
CABLE  
SETUP TOUR RESTART?  
CH02  
CH03  
CH04  
CH05  
CH06  
CH07  
CH08  
I
CH 12  
S
I
I
I
22%  
.
OK  
RESTART  
NO  
I
BACK  
I
BACK  
I
OK  
OK  
BACK  
I
ISKIP  
ICANCEL  
.
OK  
OK  
.
To complete the initial  
setting, press the  
MENU/OK button. To  
set undesired  
channels to be  
skipped, see page 17.  
Press 5/button to  
select your desired  
language.  
To stop AUTO  
PROGRAM, press  
MENU/OK button.  
Press 5/button to  
select AIR or CABLE,  
press the MENU/OK  
button.TV will start  
searching for the  
channels.  
Press the red button to  
cancel the SETUP TOUR  
RESTART function.  
If you want to make initial  
settings again when the  
next time you turn on the  
TV, press the MENU/OK  
button to activate the  
SETUP TOUR RESTART  
function.  
If the JVC logo does not appear, use AUTO PROGRAM function to make the initial settings. This function is located in the INSTALL  
menu.  
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic setting for picture  
COLOR SYSTEM  
PICTURE MODE  
You can select the appropriate color system when the picture is  
not clear or no color appears.  
You can choose the desired picture setting with one-touch.  
Press the PICTURE MODE button to select a setting.  
Press the COLOR SYSTEM button to select a setting.  
SOFT  
Softens contrast and sharpness.  
BRIGHT  
STANDARD  
USER  
Heightens contrast and sharpness.  
Standard picture setting.  
You can change this picture setting as you like.  
Select USER and adjust following items in the  
PICTURE SETTING menu. (PICTURE, BRIGHT,  
DETAIL, COLOR, TINT*)  
AUTO  
NTSC  
PAL-M  
PAL-N  
.
To operate this function with a menu:  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
*TINT can only be adjusted in NTSC signal and 525i component  
video signal.  
COLOR SYSTEM  
For the color system in each country or region, see the table  
below:  
To operate this function with a menu:  
MENU  
PICTURE menu  
PICTURE MODE  
Area  
System  
PAL-N  
PAL-M  
Country or Region  
Argentina, Paraguay, Uruguay  
To return the USER setting to the default, press the blue button  
when the PICTURE SETTING menu appears.  
Brazil  
South America  
Chile, Peru, Bolivia, Colombia, Venezuela, Ecuador,  
etc.  
NTSC  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic setting for picture (continued)  
Adjusting the picture – USER  
WHITE BALANCE  
You can adjust the desired picture setting when selecting USER  
in PICTURE MODE.  
You can change the white balance of the picture to better match  
the type of video being viewed.  
Select the WHITE BALANCE in the PICTURE menu, then choose  
the desired setting.  
1 Select the USER in PICTURE MODE under PICTURE menu.  
PICTURE menu  
PICTURE MODE  
MENU  
USER  
PICTURE menu  
MENU  
WHITE BALANCE  
2 Select the PICTURE SETTING in PICTURE menu, then adjust  
NORMAL  
COOL  
WARM  
Normal white balance.  
Bluish white.  
Reddish white.  
the setting.  
PICTURE menu  
PICTURE SETTING  
MENU  
PICTURE  
2 : Lower  
2 : Darker  
2 : Softer  
2 : Lighter  
2 : Reddish  
3 : Higher  
3 : Brighter  
3 : Higher  
3 : Deeper  
3 : Greenish  
BRIGHT  
DETAIL  
COLOR  
TINT*  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
*TINT can only be adjusted in NTSC signal and 525i component  
video signal.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced setting for picture  
2 Press the 5/buttons until the picture become level. Then  
AI ECO SENSOR (ECO)  
You can adjust TV screen contrast according to the brightness of  
your room.  
press the MENU/OK button.  
Press the ECO button to select the desired mode.  
COMPRESS (16:9)  
1
2
Mild contrast (recommended).  
Even contrast.  
You can convert a normal picture (4:3 aspect ratio) into a wide  
picture (16:9 aspect ratio).  
OFF  
Cancel the function.  
Select the COMPRESS (16:9) in the PICTURE FEATURES menu  
under PICTURE menu, then choose ON or OFF.  
To operate this function with a menu:  
FEATURES menu  
MENU  
AI ECO SENSOR  
PICTURE menu  
MENU  
PICTURE FEATURES menu  
You can display the graphic of AI ECO SENSOR on the screen.  
Select the AI ECO DISPLAY in the INSTALL menu, then choose  
COMPRESS (16:9)  
ON or OFF.  
MENU  
INSTALL menu  
AI ECO DISPLAY  
BLUE BACK  
You can set the TV to automatically change to a blue screen and  
mute the sound if the signal is weak or absent, or when there is  
no input from an antenna.  
Correcting the Slanting Picture (PICTURE TILT)  
You can correct the picture tilt caused by the earth’s magnetic force.  
1 Select the PICTURE TILT in the PICTURE FEATURES menu  
Select the BLUE BACK in the INSTALL menu, then choose ON or  
under PICTURE menu, then press MENU/OK button.  
OFF.  
PICTURE menu  
MENU  
PICTURE FEATURES menu  
MENU  
INSTALL menu  
BLUE BACK  
PICTURE TILT  
If you wish to continue viewing the poor picture, cancel the BLUE  
BACK function.  
The following display appears.  
PICTURE TILT  
About the basic operations of the menu, please see the “How  
to operate menus and menus locations” on page 5.  
BACK  
I
OK  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic setting for sound  
BALANCE  
SUPER BASS (BASS)  
You can adjust the volume balance between the left and right  
speakers.  
You can enjoy powerful bass sound with the Twin Port Bass  
Blaster unit.  
Select the BALANCE in SOUND menu, then adjust the setting.  
Press the BASS button to select ON or OFF.  
To operate this function with a menu:  
SOUND menu  
MENU  
BALANCE  
SOUND menu  
MENU  
SUPER BASS  
SOUND TURBO  
For attaching the Twin Port Bass Blaster unit, please see in page  
19.  
You can enjoy the emphatic low and high frequency levels.  
Press the SOUND TURBO to select ON or OFF.  
To operate this function with a menu:  
SOUND MODE  
MENU  
SOUND menu  
SOUND TURBO  
You can choose the desired sound setting.  
Select the SOUND MODE in SOUND menu, then choose the  
setting.  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
MENU  
SOUND menu  
SOUND MODE  
USER  
You can change this sound setting as you like.  
Select USER and adjust the frequencies in EQUALIZER  
(100, 300, 1K, 3K, 8K Hz).  
For details, see EQUALIZERon page 13.  
Emphasize on both vocal sound and music.  
Emphasize on music effect.  
DYNAMIC  
MUSIC  
NEWS  
Emphasize on vocal sound.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced setting for sound  
CINEMA SURROUND  
EQUALIZER  
You can enjoy an enhanced sound for wider audience.  
Press the CINEMA SURROUND button to select a setting.  
You can adjust the sound level of each frequencies when selecting  
USER mode in SOUND MODE.  
OFF  
Cancel the function.  
1 Select the USER in SOUND MODE under SOUND menu.  
HIGH  
LOW  
MONO  
Listen to sound with more wider audience effect.  
Listen to sound with less wider audience effect.  
Listen to mono sound with stereo effect.  
SOUND menu  
MENU  
SOUND MODE  
USER  
2 Select the EQUALIZER in SOUND menu.  
MENU  
SOUND menu  
EQUALIZER  
To operate this function with a menu:  
The following display appears.  
SOUND menu  
MENU  
CINEMA SURROUND  
EQUALIZER  
If slight volume distortion occurs when you select HIGH mode,  
change the setting to LOW mode. The CINEMA SURROUND  
effect will be less noticeable.  
100 300  
1K  
3K  
8K Hz  
If you use CINEMA SURROUND and SOUND TURBO together,  
volume distortion might occurs.  
BACK  
I
OK  
.
MTS  
3 Select and adjust the desired frequencies.  
4 Press the MENU/OK button to exit the menu.  
You can enjoy the stereo and SAP broadcasted programs.  
Select the MTS in SOUND menu, then choose the desired mode.  
Adjust high frequency will affect higher pitch sound and vice versa.  
SOUND menu  
MTS  
MENU  
AI VOLUME  
STEREO  
SAP  
MONO  
Select stereo sound.  
Select second audio programs.  
Select monaural sound.  
You can adjust the volume of all the channels and video inputs to  
the same level automatically.  
Select the AI VOLUME in SOUND menu, then choose ON or OFF.  
This function is not available in video mode.  
SOUND menu  
MENU  
AI VOLUME  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Favorite channel and video setting  
4 Select the desired item that you wish to adjust.  
PICTURE BRIGHT DETAIL COLOR  
To register the favorite channel  
You can register and recall 4 favorite channels by using the color  
buttons (red, green, yellow, blue).  
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)  
*TINT can only be adjusted in NTSC signal.  
TINT*  
1 In TV mode, select a TV channel (CH02-CH69, CC01-CC125)  
5 Press the MENU/OK button to exit the menu.  
you desired to register.  
2 Press and hold a color button for 3 seconds or more.  
FAVORITE CHANNEL I PROGRAMMED!appears on the  
screen and current channel is registered.  
3 To register other favorite channels, repeat Step 1 to 2.  
To recall the favorite channel, press the color button.  
To adjust the video setting (VIDEO SETTING)  
You can only adjust the picture and sound settings for video inputs.  
1 Display the PICTURE menu and select VIDEO SETTING in  
PICTURE FEATURES menu.  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
When the TV is in menu mode, favorite channel function is not available.  
VIDEO SETTING  
To adjust favorite channel setting  
(FAVORITE CH SETTING)  
You can adjust the picture and sound settings for the favorite channels.  
1 Display the PICTURE menu and select FAVORITE CH  
SETTING in PICTURE FEATURES menu.  
2 Select VIDEO STATUS in VIDEO SETTING menu, then  
choose the desired video input.  
VIDEO SETTING  
VIDEO STATUS  
VIDEO SETTING  
3 Select EFFECT, then press 2/3 button  
to choose ON.  
VIDEO STATUS  
PICTURE  
BRIGHT  
DETAIL  
COLOR  
VIDEO-1  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
To cancel the settings, choose OFF.  
FAVORITE CH SETTING  
TINT  
SOUND MODE  
EFFECT  
USER  
ON  
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING  
menu, then choose the desired favorite channel.  
BACK  
I
IRESET  
OK  
FAVORITE CH SETTING  
FAVORITE CHANNEL  
3 Select EFFECT, then press 2/3 button  
to choose ON.  
FAVORITE CH SETTING  
4 Select the desired item that you wish to adjust.  
PICTURE BRIGHT DETAIL COLOR  
FAVORITE CHANNEL  
PICTURE  
BRIGHT  
DETAIL  
COLOR  
I
CH02  
To cancel the settings, choose OFF.  
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)  
TINT*  
TINT  
SOUND MODE  
EFFECT  
*TINT can only be adjusted in NTSC signal and 525i component video signal.  
USER  
ON  
5 Press the MENU/OK button to exit the menu.  
BACK  
I
OK  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
.
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customized setting  
VNR  
CHILD LOCK  
You can reduce the picture noise.  
You can disable the front control buttons of the TV.  
Select the VNR in the PICTURE FEATURES menu under  
Select the CHILD LOCK in the FEATURES menu, then choose  
PICTURE menu, then choose a setting of VNR function.  
ON or OFF.  
FEATURES menu  
MENU  
CHILD LOCK  
PICTURE menu  
MENU  
PICTURE FEATURES menu  
VNR  
OFF TIMER  
OFF  
AUTO  
MIN  
VNR is turned off.  
You can set the TV to turn off automatically to standby mode after  
a set time.  
Press the OFF TIMER button to select a desired period of time.  
Effect of VNR is automatically controlled.  
Effect of VNR becomes minimum level.  
Effect of VNR becomes maximum level.  
MAX  
OFF TIMER  
If you select MAX, the picture becomes softer even if the original  
picture is sharp.  
0
120  
You can set the period of time  
to a maximum of 120 minutes  
in 10 minutes step.  
10  
CLOSED CAPTION  
If they are included in a program, you can view closed captions or  
text information.  
BACK  
I
OK  
Press the CLOSED CAPTION button to select a setting.  
OFF  
CLOSED CAPTION  
TEXT  
To operate this function with a menu:  
FEATURES menu  
MENU  
OFF TIMER  
1 Select the CLOSED CAPTION in INPUT menu, then choose  
When the elapsed of time left one minute, GOOD NIGHT!”  
appears on the screen.  
You can display the OFF TIMER menu again to confirm or  
change the remaining time.  
CAPTION or TEXT.  
CLOSED CAPTION  
INPUT menu  
MENU  
2 Press the 2/3 button to select the desired caption or text  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
channel.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customized setting (continued)  
EXT. INPUT (TV/VIDEO)  
AUTO SHUTOFF  
You can select TV or video terminal input with one touch.  
Press the TV/VIDEO button to select an input.  
To operate this function with a menu:  
You can set the TV to turn off automatically when no signal is  
received for about 15 minutes or longer after the end of a  
broadcast.  
Select AUTO SHUTOFF in INSTALL menu, then choose ON or  
INPUT menu  
MENU  
EXT. INPUT  
OFF.  
MENU  
INSTALL menu  
AUTO SHUTOFF  
DISPLAY  
The AUTO SHUTOFF function does not turn off the TVs main  
power.  
The AUTO SHUTOFF function is not available in video mode.  
You can display the program number and video terminal number  
on the screen.  
Press the DISPLAY button to display the indication on the screen.  
To operate this function with a menu:  
VIDEO-2 SETTING  
INPUT menu  
MENU  
DISPLAY  
<Except AV-21YT15>  
LANGUAGE  
You can set the VIDEO-2 SETTING according to the video signal  
output from the external devices connected to the VIDEO-2  
terminal.  
Select the VIDEO-2 SETTING in INSTALL menu, then choose a  
setting.  
You can choose your desired on screen display language.  
Select the LANGUAGE in the INSTALL menu, then choose a  
language.  
INSTALL menu  
MENU  
LANGUAGE  
INSTALL menu  
MENU  
VIDEO-2 SETTING  
VIDEO  
If a normal video signal (composite video signal) is  
input.  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
B
R
COMPONENT  
If a component video signal (Y/C /C ) is input.  
For connecting methods, see Additional Preparationon page  
18.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV channel presetting  
2 Choose CHANNEL SUMMARY, then press the MENU/OK  
button.  
To register the TV channels automatically  
You can register the TV channels into the TVs channel list  
automatically.  
CHANNEL SUMMARY menu appears.  
CHANNEL SUMMARY  
1 Display the INSTALL menu.  
CH/CC  
SKIP  
INSTALL menu  
MENU  
CH02  
CH03  
CH04  
CH05  
CH06  
CH07  
CH08  
I
I
I
I
.
2 Choose AUTO PROGRAM, then press the MENU/OK button.  
3 Press the 5/button to select AIR or CABLE, then press the  
MENU/OK button.  
BACK  
I
ISKIP  
AUTO PROGRAM function starts, and the channels received  
are registered automatically.  
OK  
ICANCEL  
.
4 SETUP TOUR RESTART?appears.  
3 Choose the channel which you want to skip.  
The skip can be set to all channels of AIR (CH02-CH69) and  
CABLE (CC01-CC125).  
To start the SETUP  
TOUR  
To skip the SETUP  
TOUR  
Press the MENU/OK button. Then proceed to  
step 5 of Setting up your TVon page 8.  
Press the Red button.  
4 Press the yellow button to skip the channel.  
To cancel the skip, press the blue button.  
5 The CHANNEL SUMMARY menu appears.  
For details of SETUP TOUR, see page 8.  
5 Press the MENU/OK button to exit the menu.  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
CHANNEL SUMMARY  
You can set undesired channels to be skipped.  
Channels are to be skipped cannot be selected by the  
CHANNEL -/+ button.  
1 Display the INSTALL menu.  
INSTALL menu  
MENU  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional preparation  
The illustrations shown in this section are for AV-29VT35 and AV-  
21YT15 only, which are used for explanation purpose. Your TV  
may not look exactly the same as illustrated.  
Connecting to rear component/video input  
terminal and output terminal  
Rear of TV  
AV-29VT35  
Before connecting  
VCR (for playing)  
DVD player (composite signals)  
COMPONENT  
VIDEO-1  
Read the manuals provided with the devices for the proper  
(VIDEO-2)  
OUTPUT  
INPUT  
INPUT  
connection.  
S
Turn off all the devices including the TV.  
Note that connecting cables are not supplied.  
VCR (for recording)  
OVER  
.
V
L
Y
V
L
/
V
BASS  
SPEAKER  
OUT  
L
CB  
/
/
MONO  
MONO  
DVD player  
(component video signals)  
Connecting to front video input terminal  
CR  
R
R
R
AV-29VT35  
Front of TV  
Rear of TV  
Camcorder or TV game  
AV-21YT15  
VIDEO-1  
INPUT  
R
V
L/MONO  
MENU  
OK  
OUTPUT  
IN (VIDEO-3)  
VCR (for playing)  
DVD player (composite signals)  
Headphones  
AV-21YT15  
V
L
V
L
MENU  
OK  
/
V
L
/
MONO  
R
MONO  
VCR (for recording)  
IN (VIDEO-2)  
R
R
When you use VIDEO-1 INPUT, you should choose to connect  
S-VIDEO or video input. If S-VIDEO connector and video input  
are connected at the same time, no picture displays on the  
screen and the message PLEASE DISCONNECT VIDEO-1  
CABLE!appears. In this case, you should disconnect either S-  
VIDEO or video input.  
When connecting to COMPONENT (VIDEO-2) input, depending  
on the connection, choose the appropriate video input using the  
menu (see page 16).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional preparation (continued)  
CAUTION:  
Attaching the Twin Port Bass Blaster Unit  
The Twin Port Bass Blaster Unit is just placed on top of the TV  
and is not held in place by a screw. When using the unit, pay  
attention to the following cautions. Otherwise, the unit or TV may  
fall over and be damaged, or cause unexpected injury.  
<AV-29VT35/AV-21VT35 only>  
The Twin Port Bass Blaster Unit is packaged together with the  
TV. Before you use the TV, mount the Twin Port Bass Blaster unit  
correctly on the TV.  
Do not rest your hands or elbows on the Twin Port Bass  
The SUPER BASS (BASS) function do not work unless the  
Twin Port Bass Blaster Unit is connected correctly to the TV.  
For details on the SUPER BASS (BASS) function, see page  
Blaster Unit.  
Do not move the TV with the Twin Port Blaster Unit mounted  
on top of the TV. Before you move the TV, be sure to remove  
the unit.  
Do not move the TV by holding the Twin Port Bass Blaster  
Unit.  
12.  
1 Place the unit on top of the TV making sure that the mounting  
pin on the bottom of the unit fits into the mounting hole on the  
top of the TV.  
When you mount the unit, make sure that the mounting pin  
fits properly into the mounting hole. Otherwise, it may slide  
off the top of the TV. This may cause damage or cause  
unexpected injury.  
2 Firmly insert the Twin Port Bass Blaster Unit connector into the  
BASS SPEAKER OUT terminal.  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
Twin Port  
Bass Blaster  
Unit  
INPUT  
S
OVER  
V
Y
C
V
/V  
B
BASS  
SPEAKER  
OUT  
L
/
/MONO  
R
C
R
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If a problem occurs when you are using the TV, check the below  
troubleshooting guide before calling for repair.  
Cannot operate the  
remote control  
The batteries may be exhausted. Replace with  
new batteries (see page 7).  
Ensure that you are operating the remote less  
than seven meters from the front of your TV.  
No picture,  
Deactivate the BLUE BACK function if it is turned  
no sound  
on.  
Cannot operate the  
Press TV/VIDEO button to return to TV mode and  
menus  
try operating the menus.  
Snowy picture  
Check the aerial cable and its connection with the  
TV.  
Cannot operate the  
Deactivate the CHILD LOCK function if it is turned  
front control buttons  
on (see page 15).  
Stripes appear on Interference occurs caused by other devices such  
the picture  
as an amplifier, personal computer, or a hair drier.  
Move such devices away from your TV.  
TV is turned off  
suddenly  
This may due to the AUTO SHUTOFF function is  
activated. Press the POWER button to turn on the  
TV.  
Double-pictures  
(ghosting) occur  
Interference occurs caused by signal reflecting  
from mountains or building. Try to adjust the  
aerials direction or use a better directionality  
antenna.  
Color patches  
appear at the corner  
of the screen  
This may due to the magnetized device such as a  
speaker near to your TV. Keep the device apart  
from your TV. Alternately, you can also use the  
magnetic-shielded speaker.  
Poor picture  
Choose the appropriate color system. Refer to  
COLOR SYSTEMon page 9.  
Adjust the COLOR or BRIGHT setting. Refer to  
Adjusting the picture - USERon page 10.  
Picture is tilted  
This may due to the earth magnetism. Refer to  
PICTURE TILTon page 11 to correct the tilt.  
Image takes a short  
period to be  
displayed  
Image required time to stabilize before display.  
This is not a malfunction.  
White and bright still Inevitable phenomenon due to the nature of the  
image look as if it  
were colored  
picture tube. This is not a malfunction.  
TV may emitted  
crackling sound  
This is due to a sudden change in temperature  
and it is not a malfunction. If the crackling sound  
is too frequent, request your service technician for  
inspection.  
Top of the image  
from software  
products or video  
tape is distorted  
This is due to the condition of the video signal  
whereby the image was not recorded properly.  
This is not a malfunction.  
Feel a slight electric  
shock when  
touching the TV  
screen  
This is due to the static electricity of the picture  
tube and it will not harm the human body. This is  
not a malfunction.  
Poor sound  
Adjust the sound frequency properly. Refer to  
EQUALIZERon page 13.  
Stereo or bilingual TV channel reception is poor. Change the stereo/  
sound is unclear bilingual mode to mono sound (see page 13).  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
TV RF systems  
M, N  
Color systems  
NTSC, PAL-M, PAL-N  
Receiving channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
External input / output  
VIDEO-1:  
S-video input (Except for AV-21YT15), VIDEO input, AUDIO L/R input  
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input (Except for AV-21YT15)  
VIDEO-3:  
OUTPUT:  
VIDEO input, AUDIO L/R input (Except for AV-21YT15)  
VIDEO output, AUDIO L/R output  
Headphone jack:  
Stereo mini jack (3.5 mm diameter)  
Sound-multiplex systems  
MTS (Multi-Channel Television Sound)  
Design and specifications subject to change without notice.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2005 Victor Company of Japan, Limited  
0305-FLE-JMT  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Clothes Dryer IDC 75 User Manual
Intel Server S5500WB User Manual
John Deere Air Compressor AC1 5GH User Manual
Kambrook Blender KBL110 User Manual
Kenmore Microwave Oven 87133 User Manual
Kenwood Food Processor FP220 User Manual
Kidde Smoke Alarm 0914 User Manual
KidKraft Building Set 17429 User Manual
Kodak Digital Camera C613 User Manual
Kompernass Drill PEBH 900 User Manual