JVC Flat Panel Television 1EMN24939 User Manual

Español Français English

LCD Television Built-in

DVD Player Users Guide

19" class (18.5" Diagonal)

LT-19D200

HIGH DEFINITION TELEVISION

Important Note:

In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your

sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the

carton and original packaging for future use.

Model No:

Serial Number:

0209TKH-FU-FU

Download from Www.Somanuals.com. All Manuals Search And Download.

English

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due

to possible eye injury.

CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION:INSIDE, NEAR THE DECK MECHANISM.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates

viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the AC power cord with wet hands.

• Do not remove this unit’s cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to

this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.

• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

• The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface.

• Do not install the unit near or over a radiator or heat register.

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.

Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is

placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

DEW CONDENSATION WARNING

• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few

hours until its inside gets dry.

- The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

NOTE ABOUT RECYCLING

• This unit’s packaging materials are recyclable and can be reused.

Please dispose of any materials in accordance with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your

local regulations concerning chemical wastes.

ꢀTrademark Information

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

• Manufactured under license from Dolby Laboratories. “Dolby”and the double-D symbol are trademarks of Dolby

Laboratories.

• Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

•

is a trademark of DVD Format/Logo Licensing Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

NTRODUCTION

ꢀSupplied Accessories

remote control

(RM-C-2152)

batteries (AA x 2)

Screw for attaching the

stand x 3 (FPH34120)

• If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free

customer support line found on the cover of this manual.

ꢀAttaching the Stand

You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the

proper direction.

Spread a thick and soft cloth over a

table as shown below.

Place the main unit face down onto it.

Make sure not to damage the screen.

Align the 2 stand hooks with the two

hooks under the bottom of the main

Drive Screws in the 3 threaded

holes at the bottom of the stand

until they are tight.

unit (shown by arrow ), then slide

➀

the stand in the direction as shown

by arrow until it stops and the 4

➁

mounting holes are aligned.

screw holes

Make sure not to put the AC power

cord between the stand and the unit.

To remove the stand from this unit

Unscrew the screws indicated by above “ ”screw holes.

➂

After the screws are removed pull the stand up toward the rear of

the unit. Be careful not to drop the stand when you remove it.

Note:

• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall,

resulting in injuries as well as damage to the unit.

• Make sure to use a table which can support the weight of this unit and is larger than this unit.

• Make sure the table is in a stable location.

ꢀSymbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

TV FUNCTIONS

DVD FUNCTIONS

DVD

: Analog TV operation

: Playback of DVD-video

DTV

: Digital TV operation

: Playback of audio CD

• If neither symbol appears under the function heading,

operation is applicable to both.

• If neither symbol appears under the function heading,

operation is applicable to both.

-2.5°

10°

ꢀTilt Stand

You can adjust the stand to change the angle of the unit (-2.5° to 10°).

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀFeatures

DVD

• DTV/TV/CATV

• Dolby Digital Sound

- You can use your remote control to select

channels which are broadcast in digital format and

conventional analog format. Also, cable subscribers

can access their cable TV channels.

• Information Display (DTV only)

- You can display the title, contents and other

information of the current DTV program on the TV

screen.

- Enjoy Dolby Digital multi-channel surround sound

when you connect the unit to your Dolby Digital

decoder.

• Still / Fast / Slow / Step Playback

- Various playback modes are available including still

pictures, fast forward/reverse, slow motion and step

frames.

• DVD Menus in a Desired Language

- You can display DVD menus in a desired language, if

available on a DVD-video.

• Autoscan

- This unit automatically scans and memorizes

channels available in your area, eliminating difficult

setup procedures.

• Auto Power Off

- If there is no operation for 20 minutes, the unit will

turn itself off automatically.

• Child Lock

- This feature allows you to block children’s access to

inappropriate programs.

• Parental Lock

- Block the viewing of DVD-video unsuitable for children.

• Resume Playback

• Closed Caption Decoder

- Built-in closed caption decoder displays text for

closed caption supported programs.

• MTS/SAP Tuner

- Lets you resume playback from the point at which

playback was stopped.

• Bit Rate Indication

- Audio can be selected from the remote control.

• Auto Shut Off Function

• DRC (dynamic range control)

- You can control the range of sound volume.

- If there is no signal input from the antenna terminal

and no operation for 15 minutes, the unit will turn

off automatically.

Accessing from [MODE] button

During playback

• Sleep Timer

- This feature will automatically turn off the power of

the unit at a specific time.

• Subtitles in a Desired Language

- You can select a desired language for displaying

subtitle, if that language is available on a DVD-video.

• Selecting a Camera Angle

- You can select the desired camera angle, if a DVD

contains sequences recorded from different angles.

• Zoom

• Choices for On-screen Language

- Select your on-screen language:

English, Spanish or French.

• Stereo Sound Function

• PLL Frequency Synthesized Tuning

- Provides free and easy channel selection and lets

you tune directly to any channel using the number

buttons on the remote control.

• Various Adjustment for Picture and Sound

- Customizes image quality to suitable for your room

and sets the sound as your preference.

• HDMI Input

- Allows you to enlarge the size of picture image.

• Black Level Adjustment

• Virtual Surround

• Search

- chapter search / title search / track search / time

• Marker

- The part on the disc designated by user can be

called back.

• Component Video Input

• PC Input

• Repeat

- chapter / title / track / all / A-B

• S-video Input

• AV Input

• Digital Audio Output

Accessing from [MODE] button

• Headphone Audio Output

In Stop mode

• Program Playback for audio CD

- You can program the order of tracks to play them

back in designated order.

• Random Playback for audio CD

- This unit can shuffle the order of tracks to play them

back in randomly.

Accessing from [AUDIO] button

During playback

• Choices for Audio Language and Stereo Sound

Function

- Select your desired languages or stereo sound

function when different options are available on

your disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

NTRODUCTION

ꢀContents

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

DVD Functions

OPERATING DVD

INTRODUCTION

Playable Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Unplayable Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Disc Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Paused and Step-by-step Playback . . . . . . . . . . . . . . . . . . . . .36

Fast Forward / Fast Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Slow Forward / Slow Reverse. . . . . . . . . . . . . . . . . . . . . . . . . . .37

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Search Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Repeat Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Repeat A-B Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

On-screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Supplied Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Attaching the Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Tilt Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

PREPARATION

Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connection to Cable Receiver or Satellite Box . . . . . . . . . .10

External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Plug In the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

TV Functions

DVD SETTING

DVD Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

DVD Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Parental Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Reset to the Default Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

WATCHING TV

Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Volume Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Switching Each Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Switching Audio Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TV Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

TV Screen Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

TROUBLESHOOTING

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

INFORMATION

Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . .53

General Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Other Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

OPTIONAL SETTING

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Autoscan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Channel List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Manual Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Antenna Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Child Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

PC Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Current Software Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Download from Www.Somanuals.com. All Manuals Search And Download.

English

1. y (power) (p. 15)

ꢀControl Panel

Press to turn the unit on and off.

2. B (play) (p. 36)

Press to begin the disc playback.

3. C (stop) (p. 36)

Press to stop the disc playback.

(eject) (p. 36)

Press to eject the disc.

5. CH

(p. 16 / p. 17)

Press to select channels or move up ( ) / down ( )

through the main menu items.

6. SETUP (p. 15 / p. 44)

Press to display the main menu.

7. VOL

(p. 16)

Press to adjust the volume or move right ( ) / left ( )

through the main menu items.

8. DVD indicator

DVD

AND BY

POWER ON

Lights up orange when the disc is inserted.

9. STAND BY indicator

Lights up red when power is off.

10. POWER ON indicator

Lights up blue when power is on.

11. infrared sensor window

Receives infrared rays transmitted from the remote

control.

[Side Panel]

ꢀTerminals

12. HDMI 2 input jack (p. 10 / p. 11)

HDMI connection from HDMI device.

13. S-video input jack (p. 12)

S-video cable connection from an external device.

14. video input jack (p. 13)

RCA video cable connection from an external

device.

15. audio input jack (p. 12 / p. 13)

RCA audio cable connection from an external

device.

16. headphone jack

Headphone connection for personal listening.

[Rear Panel]

HDMI 2

17. antenna input jack (p. 10)

RF coaxial cable connection for your antenna or cable

TV signal.

18. disc loading slot (p. 36)

Insert the disc with the label side facing forward.

19. AC power cord (p. 14)

Connect to a standard AC outlet to supply power to

this unit.

20. PC input jack (p. 14)

HEAD PHONE

VGA cable connection for PC.

21. HDMI 1 input jack (p. 10 / p. 11)

HDMI connection for HDMI or DVI device.

22. component video and audio input jack (p. 10 / p. 12)

RCA component video cable and RCA audio cable

connection from an external device.

23. digital audio output jack (p. 13)

Coaxial digital cable connection for a decoder or an

audio receiver.

24. audio input jack for PC connection (p. 14)

Mini-plug audio cable connection for PC.

25. audio input jack for HDMI 1 (p. 11)

RCA audio cable connection from a DVI device.

(For HDMI 1 input jack only)

Note:

service terminal (service use only)

• User should not connect any devices to the service terminal

such as digital camera, keyboard, mouse, etc. (because these

will not work).

Download from Www.Somanuals.com. All Manuals Search And Download.

NTRODUCTION

ꢀRemote Control Function

1. MUTE (p. 16)

Press to turn the sound on and off.

2. Number buttons (p. 16)

• Press to select channels.

• Press to select chapter, title (DVD), or track (CD)

directly.

(hyphen)

• Press to shift the subchannel from the main

channel.

+10 button

• Press to select 10 or higher number of chapters.

3. SETUP (p. 15 / p. 44)

Press to display the main menu.

(p. 15)

Press to move left / right / up / down through

the items.

5. ENTER (p. 15)

Press to decide the command of setting when

the main menu is displayed.

6. INFO (p. 18 / p. 41)

Digital mode (DTV)

• Press to display the channel information, signal

type and TV setting.

Analog mode (TV)

• Press to display the channel number, signal

type and TV setting.

External input mode

• Press to display the external input mode, signal

type and TV setting.

DVD mode

• Press to display the current status.

7. CHANNEL

(p. 16 / p. 17)

Press to select channels and the external input

mode.

8. REV E / FWD D (p. 37)

Press to begin slow forward or slow reverse

playback during the pause mode (DVD) and

search forward or backward through the disc.

9. SKIP H / G (p. 38)

Press to skip forward or backward chapters, titles

(DVD) or tracks (CD).

Download from Www.Somanuals.com. All Manuals Search And Download.

English

10. EJECT

Press to eject the disc.

11. DISC MENU (p. 36)

Press to display the menu on the disc.

12. TITLE (p. 36)

Press to display the title menu (DVD).

13. INPUT SELECT (p. 17)

Press to access connected external devices

like a BD/DVD recorder.

14. POWER (p. 15)

(p. 36)

23. PAUSE F (p. 17)

TV mode

• Press to pause screen image.

DVD mode

• Press to pause the disc playback.

24. CLEAR (p. 39)

• Press to clear the numbers entered incorrectly.

• Press to cancel the point A for A-B repeat.

• Press to remove the track number in program

input (CD).

Press to turn the unit on and off.

15. AUDIO (p. 17 / p. 42)

25. MODE (p. 5)

• Press to arrange the playing order or

playback randomly (CD).

Digital mode (DTV)

• Press to select the audio language.

Analog mode (TV)

• Press to select the audio mode.

DVD mode

• Press to select the audio language (DVD), or

sound mode (CD).

• Press to set the black level (DVD) and

the virtual surround on or off.

• Press to change the camera angle to see the

sequence being played back from different

angle (DVD).

• Press to search chapter, title (DVD),

track (CD) or time.

16. SLEEP (p. 16)

Press to activate the sleep timer.

17. CH RETURN (p. 16)

Press to return to previously viewed channel.

18. SCREEN MODE (p. 19)

Press to select aspect ratio available for the TV

screen.

• Press to set the marker.

• Press to repeat playback chapter, title (DVD),

track, disc (CD) repeatedly or between

designated point A and B.

• Press to magnify the part of picture

(2x and 4x : DVD).

19. BACK (p. 18)

• Press to select the subtitles on the disc (DVD).

Press to return to the previous menu operation.

20. VOLUME

(p. 16)

Press to adjust the volume.

21. PLAY B (p. 36)

Press to begin the disc playback.

22. STOP C (p. 36)

Press to stop the disc playback.

ꢀInstalling the Batteries

Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or

old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

Download from Www.Somanuals.com. All Manuals Search And Download.

REPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

Before you connect...

Be sure your antenna or other device is connected properly before plugging in the AC power cord.

ꢀAntenna Connection

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

rear of this unit

e.g.)

VHF / UHF

antenna

RF coaxial cable

cable TV signal

* Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit

to memorize all available channels in your area. (Refer to “Initial Setup” on page 15.)

Note:

• If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local

electronics store for these items.

• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than

settop versions.

• To switch your reception source easily between antenna and cable, install an antenna selector.

• If you connect to the cable system directly, contact the CATV installer.

ꢀConnection to Cable Receiver or Satellite Box

Use an HDMI or an RCA component video cable to connect the HDMI or the component video input jack of the unit to the

HDMI or the component video output jack of the cable receiver / satellite box.

If you connect to the unit’s component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the

Component Video connector.

HDMI OUT

HDMI cable

e.g.)

side or

rear of this unit

satellite dish

AUDIO OUT

COMPONENT VIDEO OUT

Pb/Cb

Pr/Cr

HDMI

ANT IN

RF coaxial

cable

(green) (blue)

(red)

cable TV signal

including PPV

TE EO

(green)

(blue)

(red)

cable receiver / satellite box

RCA component video cable

and RCA audio cable

* You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video

output jack because they might have different output jacks.

* Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the

clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable /

satellite provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.

ꢀExternal Device Connection

[HDMI Connection]

HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high

definition video and multi-channel digital audio through a single cable.

HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI CEC enabled devices

with a single remote. CEC (Consumer Electronics Control) is an optional protocol used in HDMI.

HDMI CEC on this TV is compliant with “High-Definition Multimedia Interface Specification”.

The TV does not support HDMI CEC functions that are not listed below.

The TV does not guarantee to support use of all HDMI CEC enabled devices.

Devices that are not enabled to HDMI CEC cannot be controlled with this TV.

Control the TV using the HDMI CEC

enabled device

Turn the TV on and switch to the video

source of the operating device.

Switch to the video source of the

operating device.

Control the HDMI CEC enabled device

using the TV

Send status of the TV to the HDMI CEC

enabled device

Turn off the operating device by pressing When switching the TV’s external input

the power button for three seconds or

more, and turning off the TV.

* Some device may not support this

function. For more details refer to the

device’s manual.

or channel.

When switching the TV’s menu language.

* Information regarding behaviour of the

device when status is received, refer to

the external device’s manual.

e.g.)

side or

rear of this unit

HDMI cable

HDMI OUT

TI LE

HAPT

EPEAT

HDMI 2

BD/DVD recorder

with the HDMI output jack

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.

• This unit accepts only 2 channel audio signal (LPCM).

• You need to select “PCM” for the digital audio output of the device you connected or check the HDMI audio setting.

There may be no audio output if you select “Bitstream”, etc.

• This unit only accepts signals in compliance with EIA861.

[HDMI-DVI Connection]

Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.

rear of this unit

e.g.)

DVI OUT

HDMI-DVI conversion cable

To HDMI1

input jack only

AUDIO OUT

cable receiver or satellite box

with the DVI output jack

RCA audio cable

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

• HDMI-DVI connection requires separate RCA audio connections as well.

• Audio signals are converted from digital to analog for this connection.

• DVI does not display 480i image that is not in compliance with EIA/CEA-861/861B.

Download from Www.Somanuals.com. All Manuals Search And Download.

REPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[Component Video Connection]

RCA component video connection offers better picture quality for video devices connected to the unit.

If you connect to the unit’s component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the

Component Video connector.

e.g.)

rear of this unit

(green)

(blue)

(red)

Pb/Cb

Pr/Cr

COMPONENT VIDEO OUT

TLE

CHAP ER 15

REPE -B

AUDIO OUT

BD/DVD recorder with

the component video output jack

(green)

(blue)

(red)

RCA component

video cable

RCA audio cable

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

[S-video Connection]

S-video connection offers good picture quality for video devices connected to the unit.

If you connect to the unit’s S-Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video

connector.

side of this unit

e.g.)

S-VIDEO

OUT

AUDIO OUT

S-video cable

TLE

CHAP ER 15

REPE -B

BD/DVD recorder with

the S-video output jack

RCA audio cable

Note:

• If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit.

If you connect to the unit’s Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video

connector.

When the audio jack of the video device is monaural, connect an RCA audio cable to the audio L input jack.

e.g.)

side of this unit

AUDIO OUT

VIDEO

OUT

RCA video cable

camcorder

video game

STAND BY

ST REO

VCR

RCA audio cable

Note:

• If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.

[Audio Output Connection (for digital broadcasting only)]

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital

broadcasting sound.

Use a digital audio coaxial cable to connect the unit to external digital audio devices.

e.g.)

rear of this unit

DIGITAL AUDIO

COAXIAL IN

Dolby Digital

decoder

digital audio coaxial cable

Download from Www.Somanuals.com. All Manuals Search And Download.

REPARATION

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor.

Use an VGA cable for this connection and it requires stereo mini plug audio cable as well.

e.g.)

rear of this unit

VGA cable

VGA cable should be

with ferrite core.

personal computer

stereo mini plug audio cable

The following signals can be displayed:

Format

VGA

Resolution

640 x 480

800 x 600

1,024 x 768

Refresh rate

60Hz

Format

Resolution

Refresh rate

1,280 x 768

60Hz

SVGA

XGA

60Hz

WXGA

1,360 x 768

60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

• Please purchase the VGA conversion cable that has a ferrite core.

• The following operations may reduce noise.

- Attach a ferrite core to the AC power cord of your PC.

- Unplug the AC power cord and use the built-in battery of your PC.

ꢀPlug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.

rear of this unit

AC power cord

AC outlet

Caution:

• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).

Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

TV Functions

ꢀInitial Setup

This section will guide you through the unit’s initial setting which includes

selecting a language for your on-screen menu and autoscan, which

automatically scans and memorizes viewable channels.

Use [Cursor

then press [ENTER].

B] to select the desired location setting,

Initial Setup

Before you begin:

Select “Retail” or “Home” for your ocation

Make sure the unit is connected to antenna or cable.

After making all the necessary connections,

press [POWER] to turn on the unit.

Retail

Home

NTER

Select

Enter

• Select ”Retail”, the unit will be set up with predefined

setting for retail displays. In this setting, the power

consumption may possibly exceed the limited

requirement of the ENERGY STAR® qualification.

• Select ”Home”, the unit is set to maximize the energy

efficiency for home setting and it can be adjusted

through a choice of picture and sound quality

according to your preference.

• This operation may take a few moments.

Use [Cursor

] to select the on-screen language

from the choices on the right side of the TV screen.

(English / Español / Français)

Initial Setup

• When the initial setup is completed, the lowest

memorized channel with the confirmation message

of the location setting will be displayed on the TV

screen.

Engl sh

Español

Français

Select the language for setup display

Elija el idioma de ajuste

Sélect onner langue écran config

Note:

TER

Select

Enter

^SETUPSkip

• If you connect the cable system directly, contact the CATV

installer.

• If you press [POWER] or [SETUP] during autoscan, this

setting will be canceled.

• “Initial Setup” menu on step 3 will be displayed in the

selected language after you press [ENTER].

• The initial autoscan function can be executed for either

“Antenna” or “Cable” only once. When you change the

connection (Antenna / Cable), set autoscan again.

(Refer to page 20.)

Use [Cursor

] to select “Antenna” for TV channels

or “Cable” for CATV channels, then press [ENTER].

• If there is no signal input from the antenna terminal and

no operation for several seconds after you turn on the unit,

“Helpful Hints” appears. Follow the instructions listed on

the TV screen.

Initial Setup

Make sure the antenna is connected o“ANT IN” jack

Antenna

Se ect he dest nation of “ANT IN” jack

Cable

Initial Setup

Skip

Retry

Later

No channel

Try Autoscan again?

Ver fy that you have

on he back of theTV the channel nstallation

searches this connection If you are using cable or satel ite

registered

Antenna

Cab

cable connected

ANT IN

ocess

jack

ANT

box please conf rm the input which you have connec ed the

box and press the “INPUT SELECT” key on the remote con rol to

se ect he appropr ate source input

Select

Enter

Back

^SETUPSkip

BACK

ENT

^SETUPSkip

EN ER

Select

Enter

• “Autoscan” will begin.

• You must set ”Home” in step 4. Otherwise, the settings

of picture and sound quality you adjusted will not be

memorized after you turn off the unit.

Initial Setup

Now the system

scanning for channels

ease wait

Autoscan

ll take up to 20 nu es to complete

After an initial setup is completed...

Analog channels

Digital channels

0ch

^SETUPSkip

• If you want to scan the channels automatically again,

refer to “Autoscan” on page 20.

• You can add the desired channels unmemorized by

“Autoscan”. Refer to “Manual Register” on page 21.

• If you want to change to another language, refer to

“Language Selection” on page 22.

• If you want to change the Location setting, refer to

“Location” on page 33.

Download from Www.Somanuals.com. All Manuals Search And Download.

ATCHING TV

ꢀChannel Selection

ꢀVolume Adjustment

] or [the Number buttons].

Select channels by using [CHANNEL

This section describes how to adjust the volume. The mute function, which

turns the sound off and on, is also described.

• To select the memorized channels, use

] or [the Number buttons].

[CHANNEL

• To select the non-memorized channels, use

[the Number buttons].

] to adjust the audio volume.

Use [VOLUME

Volume

To Use [the Number buttons]

- When selecting channel 11

The volume bar will be displayed at the bottom of the

TV screen when adjusting the volume.

• The volume bar will automatically disappear in a few

seconds.

DTV

Press [MUTE] to turn off and on the sound.

- When selecting digital channel 11-1

Be sure to press [ ] before entering

the subchannel number.

Mute

“Mute” is displayed on the TV screen for a few seconds.

• Press [CH RETURN] to return to the previously

channel.

About digital TV broadcasting:

] to recover the

Press [MUTE] again or [VOLUME

original volume.

With its high definition broadcast, digital broadcasting

far surpasses analog broadcasting in both its picture

and sound quality. Not all digital TV broadcasts are high

definition (HD). To confirm whether your watching TV

program is in HD, refer to the program guide, contact

your cable / satellite provider or local TV stations.

ꢀSleep Timer

The sleep timer can be set to automatically turn off the unit after an

incremental period of time.

Press [SLEEP] to set the sleep timer.

_(anaN_loT_gS_mC_ode)

ATSC

Air time

(digital mode)

6:00pm

Sleep

Off

(Soccer)

CH4

CH4-1

Sleep timer display appears on the TV screen.

main channel

6:30pm

(Soccer)

(News)

(Tennis)

CH4

CH4-1

CH4-2

CH4-3

Press [SLEEP] repeatedly to change the amount of time

until shut off.

main channel

subchannel

7:00pm

7:30pm

(Soccer)

CH4

CH4-1

Sleep

120min.

main channel

You can set your unit to turn off after a set period of

time (from 30 to 120 minutes).

(News)

CH4-2

(Soccer)

CH4

CH4-1

• Each press of [SLEEP] will increase the time by 30

minutes.

• After setup, the sleep timer display can be called up

for checking by pressing [SLEEP].

main channel

subchannel

8:00pm

can be changed by using

CHANNEL

[

]

What is the subchannel?

By using high compression technology, digital

broadcasting offers a service that enables multiple

signals to send simultaneously.

Therefore, you can select more than one program per

main channel since digital broadcasting technology

distinguishes between multiple channels broadcast by

a single network.

To cancel the sleep timer

Press [SLEEP] repeatedly until “Sleep Off” is displayed

on the TV screen.

Note:

• The sleep timer display will automatically disappear in a

few seconds.

• When you disconnect the unit from the AC outlet or when

a power failure occurs, the sleep timer setting will be

canceled.

Note:

• “No Signal” will appear on the TV screen after the

subchannel broadcast is over.

• “Audio only program“ message will appear on the TV

screen, when you receive only sound signal.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀStill Mode

ꢀSwitching Audio Mode

You can pause the image shown on the TV screen.

This section describes how to switch the audio in the analog mode and how

to switch the audio language in the digital mode.

Press [PAUSE F] to pause the image shown on the TV

screen.

Press [AUDIO] to display the currently selected

audio mode. While receiving an MTS broadcast,

press repeatedly to cycle through the available audio

channel.

Still

SAP / STEREO

• The sound output will not be paused.

• If no signal is detected or protected signal is received

during still mode, the image remains paused and the

sound output will be muted.

When all audio are available

SAP / STEREO

SAP / MONO

• The still function will be released after 5 minutes.

SAP / STEREO

When stereo and monaural audio are available

MONO / STEREO MONO / STEREO

When SAP and monaural audio are available

SAP / MONO SAP / MONO

To cancel still mode, press any button except [POWER].

ꢀSwitching Each Input Mode

When only monaural audio is available

You can easily switch with the remote control to the DTV (ATSC) and TV

(NTSC) or to access external devices when they are connected to the unit.

MONO

(cannot be switched)

Press [INPUT SELECT] or [CHANNEL ] repeatedly to

cycle through the input modes.

STEREO

SAP

MONO

: Outputs stereo-audio

: Outputs second audio program

: Outputs mono-audio

DTV/TV channel

DTV

Video

Press [AUDIO] to display the currently selected

language and the number of available languages.

Component

11-1

English 1/3

HDMI1

HDMI2

Press [AUDIO] repeatedly to cycle through the

available audio languages.

• Pressing [CHANNEL ] reverses the direction of the

input modes.

• Available languages differ depending on the

broadcast. “Other” is displayed when the audio

language cannot be acquired, or the acquired

languages are other than English, Spanish or French.

Note:

• [AUDIO] does not control external audio devices.

• The information display will automatically disappear in a

few seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

ATCHING TV

ꢀTV Screen Information

You can display the currently selected channel or other information such as

the audio mode on the TV screen.

DTV

In the digital mode, the detailed broadcasting information for the current

channel such as program title, program guides are displayed.

In the analog mode, the current channel number and the audio mode are

displayed.

Press [INFO] to display the details of the currently

selected program.

Press [INFO].

SAP / STEREO

480i SD

4:3

4 3

TV-PG DLSV

Broadcasting information

The following information is displayed.

• The current channel number, audio mode, type of

resolutions for video signal, TV aspect ratio, CC and

TV program rating are displayed on the top-right

corner of the TV screen.

• To clear the display, press [INFO] again. You can also

press [BACK].

A Day of Memories

KABC

11-1

English 1/2

A quarter-century ago,which may now qualify as the

good old days of newspapering,run-of-paper sales

accounted for 80 percent of the industry's advertising

revenues. Department stores and supermarket were

1080i HD

16:9

6, 7, 8

Rating

TV:TV-14

program title

program guide

(The program guide added to broadcasting

information is displayed to a maximum of 4 lines.)

broadcast station

channel number

audio language

(Refer to “Switching Audio Mode” on page 17.)

effective scanning lines and scan mode

digital TV format

program aspect ratio

CC (not available if closed caption is set to “Off”)

10 child lock rating

Note:

• When the program guide consists of more than 4 lines, use

[Cursor K/ L] to scroll.

• “No description provided.” is displayed when the program

guide is not provided.

• While the program guide is displayed, the closed caption

function is interrupted.

• In external input mode, the following screen is displayed;

e.g.) When an external device is connected to VIDEO input

jack.

Video

480i SD

480i

TV-PG DLSV

• The information display will automatically disappear in

1 minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀTV Screen Display Mode

4 types of display modes can be selected when the broadcasting station

is sending 4:3 or 16:9 video signal. And 3 types of display modes can be

selected for PC input signal.

Press [SCREEN MODE] repeatedly to switch the TV

aspect ratio.

For 4:3 video signal

For 16:9 video signal

Sidebar

Full

Zoom

Full

Cinema

Expand

Wide

Cinema

Sidebar

Full

Display a 4:3 picture at its original size. Sidebars appear

on both edges of the screen.

Display a 16:9 picture at its original size.

Zoom

Full

Display a 16:9 picture at its maximum size without

changing its horizontal and vertical ratio.

Cinema

Display a 4:3 picture at a 16:9 size; the picture is

stretched horizontally to fill the screen.

Cinema

Display a vertically stretched picture.

Expand

Display a horizontally stretched picture.

Display a 4:3 picture at a 16:9 size; the picture is

stretched horizontally and vertically to fill the screen.

This crops out the top and bottom of the picture.

Wide

Display the picture with its center at the original size

and the edges stretched horizontally to fill the screen.

For PC input signal

Normal

Full

Dot By Dot

Normal

Display a proportionately stretched picture. Sidebars

appear on both edges of the screen.

Full

Display a picture that is stretched out of proportion to

fill the screen.

Dot By Dot

Display a picture in its original size.

Download from Www.Somanuals.com. All Manuals Search And Download.

PTIONAL SETTING

ꢀMain Menu

ꢀAutoscan

This section describes the overview of the main menu displayed when you

press [SETUP]. For more details, see the reference page for each item.

The main menu consists of the function setting items below.

If you switch wires (e.g., between antenna and CATV) or if you move the

unit to a different area after the initial setting, or if you restore the DTV

channel you deleted, you will need to perform autoscan.

Before you begin: Make sure the unit is connected to antenna or cable.

Press [SETUP] to display the main menu.

Press [SETUP].

PICTURE

S OUND

CHANNEL

DETAIL

Use [Cursor K /L] to select “CHANNEL” , then press

[ENTER].

LANGUAGE

DVD

PICTURE

S OUND

CHANNEL

DETAIL

PICTURE

You can adjust the picture quality.

(Refer to “Picture Adjustment” on page 23.)

LANGUAGE

DVD

SOUND

You can adjust the sound quality.

(Refer to “Sound Adjustment” on page 24.)

Use [Cursor K /L] to select “Autoscan”, then press

[ENTER].

CHANNEL

Channel

• You can automatically scan the viewable channels.

(Refer to “Autoscan” on page 20.)

• You can skip the undesired channels when selecting

PICTURE

Autoscan

S OUND

Channel List

Manual Reg ster

CHANNEL

Antenna

DETAIL

the channels using [CHANNEL

LANGUAGE

DVD

(Refer to “Channel List” on page 21.)

• You can add the channels that were not scanned by

the autoscan.

Use [Cursor K /L] to select an appropriate option, then

press [ENTER].

(Refer to “Manual Register” on page 21.)

DETAIL

Autoscan

PICTURE

• You can change the display format for closed

caption, which displays the dialogue of a TV program

or other information across the TV screen.

(Refer to “Closed Caption” on page 25.)

• You can set the viewing limitations.

(Refer to ‘‘Child Lock”on page 28.)

• You can adjust the position, stability and clarity of the

PC screen.

(Refer to “PC Settings” on page 32.)

Back

Autoscan will rescan all channels

S OUND

CHANNEL

DETAIL

Autoscan will take up to 20 minutes to

complete

Antenna

Cable

Select the destination of "ANT IN" jack

Antenna

LANGUAGE

DVD

Cable

ANT

• When aerial antenna is connected, select “Antenna”.

• When connected to CATV, select “Cable”.

• “Autoscan” will begin.

• You can select the energy saving mode.

(Refer to “Energy Saving Mode” on page 33.)

• When you adjust the desired “PICTURE” and

“SOUND” mode, you must switch the setting from

“Retail” to “Home”. (Refer to “Location” on page 33.)

• You can confirm the version of the software currently

used in this unit.

Now the system is scanning for Channe s please wait

Autoscan w ll take up to 20 minutes to complete

75%

Analog channels

Digital channels

10ch

6ch

^SETUPExit

• When the scanning and memorizing are completed,

the lowest memorized channel will be displayed.

(Refer to ”Current Software Info” on page 34.)

LANGUAGE

Note:

You can change the language (English, Spanish,

French) displayed on the main menu.

(Refer to “Language Selection” on page 22.)

• After setting “Autoscan”, using [CHANNEL

/ +] on the

remote control skips unavailable programs automatically.

• If you connect the cable system directly, contact the CATV

installer.

• If you press [POWER] or [SETUP] during autoscan, the

setting will be canceled.

DVD

You can customize some functions for the disc

playback. Make sure the player is in stop mode.

(Refer to “DVD SETTING“ section on page 44.)

• Even if “Autoscan“ is completed, the channel setting will be

lost if the AC power cord is unplugged before turning off

the unit by pressing [POWER].

• The PIN Code will be required once you set a PIN Code in

the “Child Lock“ (Refer to page 28).

• If you want to change your PIN Code, follow the instruction

of “New Password” (Refer to page 31).

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀChannel List

ꢀManual Register

The channels selected here can be skipped when selecting the channels

This function lets you add the channels that were not added by

the autoscan due to the receptible condition at the initial setting.

using [CHANNEL

Those channels can still be selected with [the Number buttons].

Press [SETUP] to display the main menu.

Use [Cursor K /L] to select “CHANNEL”, then press

[ENTER].

Use [Cursor K /L] to select “CHANNEL”, then press

[ENTER].

PICTURE

S OUND

CHANNEL

DETAIL

PICTURE

S OUND

CHANNEL

DETAIL

LANGUAGE

DVD

LANGUAGE

DVD

Use [Cursor K /L] to select “Manual Register”, then

press [ENTER].

Use [Cursor K /L] to select “Channel List”, then press

[ENTER].

Channel

PICTURE

Autoscan

S OUND

Channel List

S OUND

Channel List

Manual Register

CHANNEL

Antenna

DETAIL

LANGUAGE

DVD

LANGUAGE

DVD

Use [the Number buttons] to enter the number of the

channel you want to add, then press [ENTER].

Use [Cursor K /L] to select the channel you want to

remove, then press [ENTER].

Channel List

PICTURE

Highlight channe s for Ch

Up/Down key selection

DTV

S OUND

CHANNEL

DETAIL

Manual Register

LANGUAGE

DVD

PICTURE

DTV

Reg ster

For analog channels select a

channel to register using number

keys

BACK

TER

Ch Select

Watch/Skip

Back

S OUND

CHANNEL

DETAIL

For digital channe s you must

perform Autoscan function

• The channel display for the removed channel

darkens. You will not be able to select the channel

again using [CHANNEL ].

LANGUAGE

DVD

BACK

Ch Change

Back

• To reactivate a removed channel, use [Cursor K/L] and

press [ENTER]. The registered channels are highlighted.

• When you remove a main channel, its subchannels

are removed as well.

Press [SETUP] to exit.

Note:

• The channel with the “DTV” indicated on the display is

ATSC. Otherwise the channel is NTSC.

Note:

• If setup completes successfully,

Press [SETUP] to exit.

“Added to the channel list” is displayed.

• If external input is used, it is not possible to register the

channel and “Unavailable” will be displayed on the TV

screen.

• By using [CHANNEL

channels only.

/ + ], you can select the memorized

Download from Www.Somanuals.com. All Manuals Search And Download.

PTIONAL SETTING

ꢀAntenna Confirmation

ꢀLanguage Selection

You can choose English, Spanish, or French as your on-screen language.

DTV

This function lets you check the digital signal strength of each channel.

Press [SETUP] to display the main menu.

Use [Cursor K /L] to select “CHANNEL”, then press

[ENTER].

Use [Cursor K /L] to select “LANGUAGE”, then press

[ENTER].

PICTURE

S OUND

CHANNEL

DETAIL

PICTURE

S OUND

LANGUAGE

DVD

CHANNEL

DETAIL

LANGUAGE

DVD

Use [Cursor K /L] to select “Antenna”, then press

[ENTER].

Channel

PICTURE

Use [Cursor K /L] to select “English”, “Español” or

“Français”, then press [ENTER].

Autoscan

S OUND

Channel List

Manual Register

CHANNEL

Antenna

DETAIL

Language

PICTURE

LANGUAGE

DVD

English

Español

França s

Se ect the language for setup disp ay

Elija el idioma de ajuste

S OUND

CHANNEL

DETAIL

Sélect onner langue écran config

LANGUAGE

Use [the Number buttons] or [CHANNEL

] to

DVD

select the channel for which you want to check the

digital signal strength.

Press [SETUP] to exit.

11-1

Antenna

PICTURE

Back

Note:

S OUND

• If you need the English menus instead of the Spanish or

French menus, press [SETUP]. Use [Cursor K /L] to select

“IDIOMA” or “LANGUE”, then press [ENTER].

Use [Cursor K /L] to select “English”, then press [ENTER].

Press [SETUP] to exit the main menu.

CHANNEL

Current50 Max

DETAIL

LANGUAGE

DVD

Ch Change

• If the channel is set to analog channel or external

input, you cannot confirm the antenna condition.

Video

Antenna

PICTURE

S OUND

CHANNEL

DETAIL

Back

Indicator s available

for digital broadcasting

only

LANGUAGE

DVD

Ch Change

Press [SETUP] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀPicture Adjustment

You can adjust brightness, contrast, color, tint, sharpness and color

temperature.

Before you begin: You must set ”Home” in ”Location” (Refer to page 33).

Otherwise, the settings you adjusted will not be

memorized after you turn off the unit.

Brightness, Contrast, Color, Tint, Sharpness,

Color Temperature

Use [Cursor K /L] to select the desired setting, then

Press [SETUP] to display the main menu.

use [Cursor

/B] to adjust.

Use [Cursor K /L] to select “PICTURE”, then press

[ENTER].

PICTURE

S OUND

Cursor

CHANNEL

DETAIL

Brightness

LANGUAGE

DVD

to decrease

brightness

to increase

brightness

Brightness

ENT

Adjust

Move

Enter

Contrast

Use [Cursor K /L] to select the item you want to adjust,

to decrease

contrast

to increase

contrast

then press [ENTER].

ENTER

Adjust

Picture

PICTURE

Color

Personal

Picture Mode

Brightness

Contrast

S OUND

CHANNEL

DETAIL

to decrease

color intensity color intensity

to increase

Color

Adjust

Tint

Sharpness

Color Temperature

LANGUAGE

DVD

Normal

Tint

to add red

to soften

to add green

to sharpen

Adjust

Sharpness

Adjust the picture quality.

Sharpness

Adjust

Picture Mode

Use [Cursor K /L] to select the desired setting, then

press [ENTER].

(‘‘Personal“, ‘‘Standard“, ‘‘Sports“, ‘‘Movie“ and ‘‘Game“)

Color Temperature

ColorTemp. Normal

to add warm

colors

to add cool

colors

ENTER

Adjust

Move

Enter

Picture

PICTURE

Picture Mode

Brightness

Contrast

Personal

S OUND

CHANNEL

DETAIL

Standard

Sports

Movie

Color

Press [SETUP] to exit.

Tint

Game

Sharpness

Color Temperature

LANGUAGE

DVD

Note:

• To cancel picture adjustment, press [SETUP].

• Only the “Personal” setting can be adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

PTIONAL SETTING

ꢀSound Adjustment

TV Speakers

You can adjust the sound mode, equalizer and some other sound functions.

Select the audio output from the unit’s speakers, or not.

If your amplifier compatible with the CEC function is

connected to this unit using an HDMI cable, some part

of the sound operations such as volume up can access

synchronized by using this unit’s remote control.

Before you begin: You must set ”Home” in ”Location” (Refer to page 33).

Otherwise, the settings you adjusted will not be

memorized after you turn off the unit.

Press [SETUP] to display the main menu.

Use [Cursor K /L] to select the desired option, then

press [ENTER].

TV Speakers

PICTURE

"On":

Sound will be output from he TV

speakers

"Off":

Sound will not be output from he

TV speakers

SOUND

CHANNEL

DETAIL

Off

Ext Amp

Use [Cursor K /L] to select “SOUND”, then press

[ENTER].

"Ext Amp":

Operation

to the HDMI CEC compa ible amp

with HDMI cable For deta ls look

in the user manual

possib e by connecting

LANGUAGE

DVD

PICTURE

S OUND

CHANNEL

DETAIL

The sound will be output from the unit’s

speakers.

Off

LANGUAGE

DVD

The sound will not be output from the

unit’s speakers.

This function allows you to control audio

output from CEC-compatible devices

with the unit’s remote control.

Ext. Amp

Use [Cursor K /L] to select the sound type you want to

adjust, then press [ENTER].

Sound

PICTURE

Sound Mode

Equalizer

Standard

Ext Amp

Press [SETUP] to exit.

SOUND

CHANNEL

DETAIL

TV Speakers

LANGUAGE

DVD

Note:

• To cancel sound adjustment, press [SETUP].

• We do not guarantee 100% interoperability with other

brands of CEC compliant devices.

Adjust the following items.

Sound Mode

Use [Cursor K /L] to select the desired setting, then

press [ENTER].

(“Personal “, “Standard “, “Movie “, “Music “and “News “)

Sound

PICTURE

Sound Mode

Equalizer

Personal

Standard

Movie

SOUND

CHANNEL

DETAIL

TV Speakers

Music

News

LANGUAGE

DVD

Equalizer

Adjust tonal quality for each frequencies.

Use [Cursor ] to select the specific frequency

and use [Cursor K /L] to adjust the level, then press

[ENTER].

Equalizer

PICTURE

SOUND

CHANNEL

DETAIL

LANGUAGE

DVD

120Hz 500Hz 1 5kHz 5kHz 10kHz

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀClosed Caption

A. Caption Service

You can view closed captioning (CC) for TV programs, movies and news.

Closed caption refers to text of dialogue or descriptions displayed on-

screen.

Use [Cursor K /L] to select “Caption Service”, then

press [ENTER].

Closed Caption

PICTURE

Press [SETUP] to display the main menu.

Caption Service

Digital Caption Service

Caption Style

Off

S OUND

CHANNEL

DETAIL

LANGUAGE

DVD

Use [Cursor K /L] to select “DETAIL”, then press

[ENTER].

Use [Cursor K /L] to select the desired closed caption,

then press [ENTER].

PICTURE

S OUND

CHANNEL

DETAIL

Closed Caption

PICTURE

Caption Service

Digital Caption Service

Caption Style

Off

S OUND

CHANNEL

DETAIL

CC1

CC2

CC3

CC4

Text1

Text2

Text3

Text4

LANGUAGE

DVD

LANGUAGE

DVD

Use [Cursor K /L] to select “Closed Caption”, then

press [ENTER].

Caption mode

Detail

PICTURE

CC1 and Text1;

Closed Caption

S OUND

Child Lock

are the primary caption and text services.

The captioning or text is displayed in the same

language as the program’s dialogue

(up to 4 lines of script on the TV screen, where it

does not obstruct relevant parts of the picture).

CC3 and Text3;

PC Sett ngs

CHANNEL

Energy Sav ng Mode

Location

Home

DETAIL

LANGUAGE

DVD

Current Software Info

See the following description for setting each item.

serve as the preferred data channels.

The captioning or text is often a secondary language.

CC2, CC4, Text2 and Text4;

are rarely available and broadcasters use them only

in special conditions, such as when “CC1” and “CC3”

or “Text1” and “Text3” are not available.

• There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen

immediately.

Pop-on mode:

Once characters are stored in memory, they are

displayed all at once.

Closed Caption

PICTURE

Caption Service

Digital Caption Service

Caption Style

Off

S OUND

CHANNEL

DETAIL

LANGUAGE

DVD

...

“A. Caption Service”

ꢀ page 25

ꢀ page 26

...

“B. Digital Caption Service”

“C. Caption Style”

...

Roll-up mode:

Displays the characters continuously by scrolling

(max. 4 lines).

Press [SETUP] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

PTIONAL SETTING

B. Diiggiittaall Caaptioonn Service

C. Caption Sttyle

DTV

In addition to the basic closed caption described on page 25, DTV has its

own closed caption called digital caption service. Use this menu to change

the settings for digital caption service.

You can change the caption style such as font, color or size, etc.

Use [Cursor /L] to select “Digital Caption Service”,

Use [Cursor /L] to select “Caption Style”, then press

[ENTER].

then press [ENTER].

Closed Caption

PICTURE

Caption Service

Digital Caption Service

Caption Style

Off

Caption Service

D gital Caption Service

Caption Style

Off

S OUND

CHANNEL

DETAIL

S OUND

CHANNEL

DETAIL

LANGUAGE

DVD

LANGUAGE

DVD

Use [Cursor /L] to select the desired digital caption

service, then press [ENTER].

Use [Cursor /L] to select “User Setting”, then press

[ENTER].

Closed Caption

PICTURE

Caption Service

Digital Caption Service

Caption Style

Off

S OUND

CHANNEL

DETAIL

Caption Style

Service1

Service2

Service3

Service4

Service5

Service6

PICTURE

User Setting

Font Sty e

Off

S OUND

CHANNEL

DETAIL

Font0

Middle

Wh te

So id

Font Size

Font Color

LANGUAGE

DVD

Font Opacity

Background Color

Background Opacity

Edge Color

Black

So id

LANGUAGE

DVD

Black

Edge Type

None

Select if you do not want digital caption

service. This is the default.

Off

Use [Cursor /L] to select “On”, then press [ENTER].

Select one of these before changing

any other item in “Closed Caption”

menu. Choose “Service1”under normal

circumstances.

Caption Style

PICTURE

Service 1~6

User Setting

Font Style

S OUND

CHANNEL

DETAIL

Off

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Color

LANGUAGE

DVD

Press [SETUP] to exit.

Edge Type

Use [Cursor /L] to select an item, then press

[ENTER]. Then use [Cursor /L] to select the desired

setting and press [ENTER].

Note:

• “Digital Caption Service” that you can switch differs

depending on the broadcast description.

Picture display

ABCDEFGHIJKL

Edge

(Edge Color and Edge Type)

Font

(Font Style, Font Size, Font Color and Font Opacity or

Transparency)

Background

(Background Color and Background Opacity or

Transparency)

• The setting description for each item is shown on the

next page.

• Review your setting choice made on the next page

by looking in the upper right corner of the displayed

setting box (not all selections show the differences

selected).

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Font Style

Edge Color

Closed Captioning font style can be changed as below.

Edge color of the displayed caption can be switched as

below.

Caption Style

Closed Caption

PICTURE

User Setting

S OUND

Caption Style

Closed Caption

Font Style

PICTURE

S OUND

CHANNEL

DETAIL

Font Size

User Setting

Font Style

CHANNEL

Font Color

White

Black

Red

Font Opacity

DETAIL

Font Size

Background Color

Font Color

LANGUAGE

DVD

Background Opacity

Edge Co or

Font Opacity

Background Color

Background Opacity

Green

Blue

Edge Type

LANGUAGE

DVD

Yel ow

Magenta

Cyan

Edge Color

Edge Type

Font Size

Font size of the displayed caption can be switched as

below.

Edge Type

Edge type of the displayed caption can be switched as

below.

Caption Style

Closed Caption

PICTURE

S OUND

CHANNEL

DETAIL

User Setting

Font Style

Large

Font Size

Caption Style

Closed Caption

Font Color

Middle

Small

PICTURE

S OUND

CHANNEL

DETAIL

User Setting

Font Style

Font Opacity

Background Color

Background Opacity

Edge Co or

Font Size

LANGUAGE

DVD

Font Color

None

Font Opacity

Background Color

Background Opacity

Raised

Edge Type

Depressed

Uniform

L Shadow

R Shadow

LANGUAGE

DVD

Edge Color

Edge Type

Font Color

Font color of the displayed caption can be switched as

below.

Press [SETUP] to exit.

Caption Style

Closed Caption

PICTURE

User Setting

S OUND

CHANNEL

DETAIL

Font Style

White

Black

Red

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Co or

Green

Blue

Yellow

Magenta

Cyan

LANGUAGE

DVD

Edge Type

Font Opacity

Font opacity of the displayed caption can be switched

as below.

Note:

• To show the closed caption on your TV screen, broadcast

signal must contain the closed caption data.

• Not all TV programs and commercials have the closed

caption or all types of the closed caption.

• Captions and texts may not match the TV voice exactly.

• Changing channels may delay the closed caption for a few

seconds.

Caption Style

Closed Caption

PICTURE

S OUND

CHANNEL

DETAIL

User Setting

Font Style

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Co or

Solid

Flash

LANGUAGE

DVD

Translucent

Transparent

Edge Type

• Adjusting or muting the volume may delay the closed

caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts

may be used in order to keep pace with the on-screen

action. This is not a malfunction.

• The caption or text characters will not be displayed while

the main menu or functions display is shown.

• If a black box appears on the TV screen, this means that

the closed caption is set to the text mode. To clear the box,

select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.

• If the unit receives poor quality television signals, the

captions may contain errors, or there might be no captions

at all. Some possible causes of poor quality signals are:

- Automobile ignition noise

- Electric motor noise

- Weak signal reception

- Multiplex signal reception (ghosts or screen flutter)

• The unit retains the closed caption setting if the power

fails.

• Closed caption will not be displayed when you are using

an HDMI connection.

• When the unit receives special effects playback signal (i.e.,

Search, Slow and Still) from a VCR’s video output channel

(CH3 or CH4), the unit may not display the correct caption

or text.

Background Color

Background color of the displayed caption can be

switched as below.

Caption Style

Closed Caption

PICTURE

S OUND

CHANNEL

DETAIL

User Setting

Font Style

White

B ack

Red

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Color

Green

Blue

LANGUAGE

DVD

Yellow

Magenta

Cyan

Edge Type

Background Opacity

Background opacity of the displayed caption can be

switched as below.

Caption Style

Closed Caption

PICTURE

S OUND

CHANNEL

DETAIL

User Setting

Font Style

Font Size

Font Color

Font Opacity

Background Color

Background Opacity

Edge Co or

Solid

LANGUAGE

DVD

Flash

Translucent

Transparent

Edge Type

Download from Www.Somanuals.com. All Manuals Search And Download.

PTIONAL SETTING

ꢀChild Lock

Child lock reads the ratings for programs, then denies access to the

programs which exceed the rating level you set. With this function, you

can block certain programs inappropriate for children and any channels or

external input modes can be invisible.

See the following description for setting each item.

Press [SETUP] to display the main menu.

Child Lock

PICTURE

Channel Lock

S OUND

MPAA Rating

TV Rating

CHANNEL

Canadian Eng ish Rating

Canadian French Rating

Downloadable Rating

Clear Downloadable Rating

New Password

DETAIL

LANGUAGE

DVD

Use [Cursor /L] to select “DETAIL”, then press

[ENTER].

...

PICTURE

S OUND

“A. Channel Lock”

ꢀ page 29

ꢀ page 30

ꢀ page 31

...

“B. MPAA Rating”

“C. TV Rating”

CHANNEL

DETAIL

...

LANGUAGE

DVD

...

“D. New Password”

Note:

• When you select a rating and set it to “Block”, the higher

ratings will be blocked automatically. The lower ratings

will be available for viewing.

Use [Cursor K /L] to select “Child Lock”, then press

[ENTER].

• When you set the highest rating to “View”, all ratings turn

to “View” automatically.

Detail

PICTURE

• To block any inappropriate programs, set your limits in

“MPAA Rating”, “TV Rating” and “Downloadable Rating”.

• The child lock setting will be retained after a power failure

(except the access code reverts to 0000).

Closed Caption

S OUND

Child Lock

PC Sett ngs

CHANNEL

Energy Saving Mode

Location

Home

DETAIL

LANGUAGE

DVD

Current Software Info

• If the rating is blocked, will appear.

• “Downloadable Rating” will be available when the unit

receives a digital broadcast using the new rating system.

• If the broadcasting signal does not have the

Downloadable Rating information, “Downloadable

Rating is currently not available.” will appear.

This message will also appear when you try to access

“Downloadable Rating” after you have cleared the

Downloadable Rating information, and the new

information has not been downloaded since.

• The Canadian rating systems on this unit based on

CEA-766-A and the Canadian Radio-Television and

Telecommunications Commission (CRTC) policy.

Use [the Number buttons] to enter the 4-digit

numbers for your PIN Code.

Child Lock

PICTURE

S OUND

CHANNEL

Enter password.

DETAIL

LANGUAGE

DVD

BACK

PIN Code

Back

• When you have not set up your PIN Code, enter 0000.

• When the PIN Code is correct, “Child Lock” menu is

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

A. Chhaannnneell LLock

B. MPAA Rating

MPAA Rating is the rating system created by MPAA (Motion Picture

Association of America).

Particular channels or external input modes can be invisible in this

function.

Use [Cursor K /L] to select “Channel Lock”, then press

[ENTER].

Use [Cursor K /L] to select “MPAA Rating”, then press

[ENTER].

Child Lock

PICTURE

Cannel Lock

S OUND

MPAA Rat ng

S OUND

MPAA Rating

TV Rating

CHANNEL

Canadian English Rat ng

Canadian Eng ish Rating

Canadian French Rating

Downloadable Rating

C ear Downloadable Rating

New Password

DETAIL

LANGUAGE

DVD

Canadian French Rating

Downloadable Rating

Clear Downloadable Rating

New Password

DETAIL

LANGUAGE

DVD

Use [Cursor K /L] to select the desired rating, then

press [ENTER] repeatedly to switch between “View”

and “Block”.

Use [Cursor K /L] to select the desired rating, then

press [ENTER] repeatedly to switch between “View”

and “Block”.

Channel Lock

MPAA Rating

PICTURE

V deo

S OUND

Component

NC 17

HDMI 1

CHANNEL

HDMI 2

PG 13

DETAIL

LANGUAGE

DVD

11 1 DTV

LANGUAGE

DVD

BACK

TER

BACK

Select

View/B ock

Back

EN ER

Select

View/Block

Back

Rating

Category

Rating

TV-Y7

TV-PG

Fantasy Violence

Violence

Sexual Situation

Coarse Language

Suggestive Dialogue

TV-14

TV-MA

TV Rating

PICTURE

S OUND

CHANNEL

DETAIL

TV MA

TV 14

TV PG

TV G

TV-PG, TV-14

TV Y7

TV Y

LANGUAGE

DVD

Note:

BACK

ENT

Select

View/Block

Back

• Blocked sub rating will appear beside the main rating

category in “TV Rating” menu.

• You cannot block a sub rating (D, L, S or V) if the main

rating is set to “View”.

• Changing the category to “Block” or “View” automatically

changes all its sub ratings to the same (“Block” or “View”).

Press [SETUP] to exit.

To set the sub ratings

As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further

set the sub ratings to block specific elements of

programming. To set the sub ratings, follow the step

below.

Use [Cursor K /L /

s /B] to select the desired rating,

then press [ENTER] repeatedly to switch between

“View” and “Block”.

TV Rating

PICTURE

S OUND

CHANNEL

DETAIL

TV MA

TV 14

TV PG

TV G

TV Y7

TV Y

LANGUAGE

DVD

BACK

NTER

Select

View/Block

Back

Download from Www.Somanuals.com. All Manuals Search And Download.

English

D. Neeww PPaasssswwoorrdd

Although the default code “0000” is supplied with the unit, you can set

your own PIN Code.

Use [Cursor K /L] to select “New Password”, then press

[ENTER].

Child Lock

PICTURE

Channel Lock

S OUND

MPAA Rat ng

TV Rating

CHANNEL

Canadian English Rat ng

Canadian French Rating

Downloadable Rating

C ear Downloadable Rating

New Password

DETAIL

LANGUAGE

DVD

Press [the Number buttons] to enter the new 4-digit

PIN Code.

• Enter PIN Code again in “Confirm password.” entry

field.

New Password

PICTURE

S OUND

Enter password.

CHANNEL

DETAIL

Confirm password.

LANGUAGE

DVD

BACK

PIN Code

Back

Press [SETUP] to exit.

Note:

• Make sure new PIN Code and confirm PIN Code must be

exactly the same. If they are different, the space is cleared

for reentering.

• Your PIN Code will be erased and return to the default

(0000) when a power failure occurs.

If you forget the PIN Code, unplug the AC power cord for 10

seconds to restore the PIN Code to 0000.

Download from Www.Somanuals.com. All Manuals Search And Download.

PTIONAL SETTING

ꢀPC Settings

This function lets you adjust the PC screen position, clock and phase during

PC input.

Press [SETUP] to display the main menu.

Adjust the setting.

Auto Adjustment

Use [Cursor K /L] to select “Adjust”, then press

[ENTER].

Auto Adjustment

PICTURE

Use [Cursor /L] to select “DETAIL”, then press

[ENTER].

To automatical y synchronize the

phase and clock on theTV and PC

Cancel

Adjust

S OUND

CHANNEL

DETAIL

PICTURE

S OUND

LANGUAGE

DVD

CHANNEL

DETAIL

• The horizontal/vertical position, clock and phase of

the PC screen are automatically adjusted.

LANGUAGE

DVD

Horizontal Position, Vertical Position

Use [Cursor

s /B] to adjust.

Use [Cursor /L] to select “PC Settings”, then press

[ENTER].

Cursor

Horizontal Position

Detail

PICTURE

to move PC

screen left

to move PC

screen right

Closed Caption

H. Position

S OUND

Child Lock

EN ER

Adjust

Move

Enter

PC Sett ngs

CHANNEL

Energy Sav ng Mode

Location

Home

DETAIL

LANGUAGE

DVD

Vertical Position

Current Software Info

to move PC

screen down

to move PC

screen up

V. Position

EN ER

Adjust

Move

Clock, Phase

Use [Cursor K /L] to select the setting you want to

adjust, then press [ENTER].

Use [Cursor

{ /^B] to adjust “Clock” setting to stabilize

the PC screen and “Phase” setting to improve the clarity

of the PC screen.

PC Settings

PICTURE

Auto Ad ustment

S OUND

Cursor

Hor zontal Pos t on

CHANNEL

Vertical Position

Clock

Phase

DETAIL

LANGUAGE

DVD

Clock

EN ER

Adjust

Move

Enter

to decrease

setting value

to increase

setting value

Phase

EN ER

Adjust

Press [SETUP] to exit.

Note:

• You may not obtain an appropriate screen with

“Auto Adjustment” for some signals. In this case, adjust the

settings manually.

• Adjust “Phase” setting after “Clock” setting has been

properly adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀEnergy Saving Mode

ꢀLocation

When you select ”Retail”, the power consumption may possibly exceed the

limited requirement of the ENERGY STAR® qualification.

You can set whether the power consumption is saved or not.

Press [SETUP] to display the main menu.

Use [Cursor /L] to select “DETAIL”, then press

[ENTER].

Use [Cursor /L] to select “DETAIL”, then press

[ENTER].

PICTURE

S OUND

PICTURE

S OUND

CHANNEL

DETAIL

CHANNEL

DETAIL

LANGUAGE

DVD

LANGUAGE

DVD

Use [Cursor /L] to select “Location”, then press

[ENTER].

Use [Cursor /L] to select “Energy Saving Mode”, then

press [ENTER].

Detail

PICTURE

Closed Caption

S OUND

Child Lock

S OUND

Child Lock

PC Settings

CHANNEL

PC Sett ngs

Energy Saving Mode

Location

CHANNEL

Energy Saving Mode

Location

Home

DETAIL

LANGUAGE

DVD

Home

DETAIL

LANGUAGE

DVD

Current Software Info

Use [Cursor /L] to select the desired location, then

press [ENTER].

Use [Cursor /L] to select the desired mode, then

press [ENTER].

Location

PICTURE

Energy Saving Mode

Retail

PICTURE

Location Home is

recommended for normal

home use

In the Retail Store mode, all

settings are fixed

S OUND

CHANNEL

DETAIL

Home

When set to “On”, power

S OUND

CHANNEL

DETAIL

Off

consumption is reduced by

decreasing backl ght

brightness

LANGUAGE

DVD

LANGUAGE

DVD

Select if you want to reduce the power

consumption.

Off

Press [SETUP] to exit.

The power consumption may possibly

exceed the limited requirement of the

ENERGY STAR® qualification.

Press [SETUP] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

PTIONAL SETTING

ꢀCurrent Software Info

This function shows what version of the software currently used.

Press [SETUP] to display the main menu.

Use [Cursor /L] to select “DETAIL”, then press

[ENTER].

PICTURE

S OUND

CHANNEL

DETAIL

LANGUAGE

DVD

Use [Cursor /L] to select “Current Software Info”,

then press [ENTER].

Detail

PICTURE

Closed Caption

S OUND

Child Lock

PC Sett ngs

CHANNEL

Energy Saving Mode

Location

Home

DETAIL

LANGUAGE

DVD

Current Software Info

Confirm the version of the software currently used.

Current Software Info

PICTURE

Back

S OUND

Release Vers on:

CJ19OD 1 0

CHANNEL

DETAIL

LANGUAGE

DVD

Press [SETUP] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

PERATING DVD

DVD Functions

ꢀPlayable Media

DVD-VIDEO

DVD-RW

DVD-R

CD-DA

CD-RW

CD-R

Media Type

Logo

Recorded

Signal

digital video (MPEG2)

digital audio

Media Size

5 inches (12 cm)

ꢀUnplayable Media

NEVER play back the following discs. Otherwise, malfunction may result!

3 inch (8 cm) disc, DVD-RAM, DVD-audio, CD-i, photo CD, Video CD, DVD with region codes other than 1 or ALL, DTS-CD,

DVD-ROM for personal computers, CD-ROM for personal computers, the discs with labels, scratches, stains, blemishes, etc.,

HD DVD, Blu-ray Disc, CD-RW/-R with MP3 files and CD-RW/-R with JPEG files including Kodak Picture CD.

On the following disc, the sound MAY NOT be heard.

super audio CD

Any other discs without compatibility indications

Note:

• Unfinalized discs cannot be played back.

• For DVD-RW/R, discs recorded in the VR (video recording) format cannot be played back. Only the finalized video format discs can be

played back.

• Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of

discs.

• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be

delivered.

• Do not use a single CD adaptor which makes 3 inch (8 cm) to 5 inch (12 cm) disc.

• You can play back discs with the marks listed in “Playable Media”. If you use non-standardized discs, this unit may not play them back or

the sound and video quality will be compromised.

• If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.

Region Codes

Color Systems

This unit has been designed to play back DVD

with region 1. DVD must be labeled for ALL

regions or for region 1 in order to play back on

the unit. You cannot play back DVD that are

labeled for other regions. Look for the symbols on

your DVD. If these region symbols are not on your

DVD, you cannot play back the DVD in this unit.

DVD is recorded in different color systems throughout the

world. The most common color system is NTSC (which is

used primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be

recorded in the NTSC system. You cannot play back DVD

recorded in PAL color systems.

The number inside the globe refers to region of the world.

A DVD labeled for a specific region can only be played

back on the unit with the same region code.

Download from Www.Somanuals.com. All Manuals Search And Download.

PERATING DVD

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

ꢀPlayback

ꢀDisc Menu

Before you begin:

DVD

Turn on the amplifier and any other equipment which is connected to this unit.

Make sure the external audio receiver (not included) are set to the correct channel.

Some discs contain disc menus which describe the contents of the disc or

allow you to customize disc playback, or title menu which lists the titles

available on the DVD.

Press [POWER] to turn on the unit.

To display the DVD menu, press [DISC MENU] and use

[Cursor K / L /

B] to select an item, then press

[ENTER] (or [PLAY B]).

To display the top menu, press [TITLE] and use

[Cursor K / L /

[ENTER] (or [PLAY B]).

B] to select an item, then press

Insert a disc with label facing forward.

Note:

label

• Menu operations may vary depending on the disc.

Refer to the manual accompanying the disc for more details.

• In case the DVD was recorded on both sides, make

sure the label of the side you want to play back is

facing forward.

ꢀResume Playback

Press [STOP C] during playback.

The unit switches to the DVD mode when the unit was

in TV mode and detects the type of disc.

e.g.) DVD

Resume message will appear on

Resume ON

the TV screen.

Press 'PLAY' to play from here.

To play the beginning,

press 'S TOP' first and then 'PLAY'.

Press [PLAY B]. Playback will

resume from the point at which

DVD

playback was stopped.

Note:

•

Press [PLAY B] if the unit does not go to the DVD mode.

• To cancel resume, press [STOP C] one more time in the

stop mode. On some discs, [STOP C] will not work while

the resume message appears. Please wait until the message

disappears.

• The resume information will be kept even when the unit is

turned off. However, ejecting the disc will cancel the resume

feature. Playback will start at the beginning the next time

you insert the disc.

The unit starts playback.

•

If playback does not start automatically, press [PLAY B]

again.

Press [STOP C] to stop playback temporarily.

•

If playback remains stopped for 20 minutes, the unit will

turn itself off automatically when “AUTO POWER OFF“ is

set to “ON“.

ꢀ Paused and Step-by-step Playback

Press [EJECT ] to eject the disc.

Press [PAUSE F] during playback.

• Playback will be paused and sound will be

muted.

To continue playback, press [PLAY B].

Note:

DVD

• “ ” may appear at the top-right on the TV

screen when the operation is prohibited by the

disc or this unit.

Each time you press [PAUSE F] in the pause mode, the

disc goes forward one frame at a time.

To continue playback, press [PLAY B].

• Some DVD may start playback from title 2 or 3 due to

specific programs.

• During the playback of a 2-layered disc, pictures may stop

for a moment. This happens while the 1st layer is being

switched to the 2nd layer. This is not a malfunction.

Note:

• Set “STILL MODE” to “FIELD” in the “OTHERS” menu if

pictures in the pause mode are blurred. (Refer to page 47.)

• When you cannot remove the disc, you may try either

following operations.

- Press and hold [EJECT A] on the unit for more than 5

seconds.

- Unplug the AC power cord and plug it in again, then press

[EJECT A].

It will take about 10 seconds to eject the disc, while that the

unit will not respond to any key commands.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀFast Forward / Fast Reverse

Once a desired zoom factor is set,

Press [FWD D] or [REV E] repeatedly

during playback to select the desired

forward or reverse speed.

use [Cursor K / L /

B] to slide the zoomed picture

across the TV screen.

To continue playback, press [PLAY B].

Note:

• Set “STILL MODE” to “FIELD” in the “OTHERS” menu if

pictures in the fast playback mode are blurred. (Refer to

page 47.)

• Fast forward / fast reverse speed varies with disc.

Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x)

on DVD and 1(2x), 2(8x) and 3(30x) on audio CD.

To exit zoom, repeat steps 1 to 2 above and press

[ENTER] repeatedly until “OFF“ appears.

• For DVD, sound will be muted during this function.

• For audio CD, sound will be intermittent during the search.

ꢀSlow Forward / Slow Reverse

Note:

DVD

• The gray box with an inner blue box that shows during

zoomed playback is the position guide indicates the position

of the zoomed image within the overall image.

Position guide stays on the TV screen until you press

[ENTER].

Press [FWD D] or [REV E] repeatedly

during the paused mode to select the

desired forward or reverse speed.

To continue playback, press [PLAY B].

Press [ENTER] one more time to recall the position guide

when disappears.

• Zoom function does not work while the disc menu is

displayed.

• 4x zoom is not available on some discs.

• Zoom function is also available during pause mode.

Note:

• Set “STILL MODE” to “FIELD” in the “OTHERS” menu if

pictures in the slow playback mode are blurred. (Refer to

page 47.)

• Slow forward / slow reverse speed varies with disc.

Approximate speed is 1(1/16x), 2(1/8x) and 3(1/2x).

• The sound will be muted during this function.

ꢀZoom

DVD

The zoom function allows you to enlarge the video image and to pan

through the enlarged image.

During playback, press [MODE] repeatedly until

“

”appears.

(

)

OFF ZOOM

• The picture becomes twice as large.

Press [ENTER] repeatedly to change the zoom factor,

“2x”or “4x”.

(

)

4x ZOOM

Download from Www.Somanuals.com. All Manuals Search And Download.

PERATING DVD

Using [SKIP H / G]

ꢀSearch Functions

During playback, press [SKIP H / G] repeatedly

Chapter / Title / Track Search

until a desired chapter, title or track will be selected.

current chapter/track

(CH) (TR)

You can select chapters, titles or tracks on the disc.

CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4

[SKIP H]

[SKIP G]

During playback, press [MODE] repeatedly until

“

“ / “ “ appears.

• If you want to perform the title search, use

current title

(TT)

[Cursor K / L] repeatedly until “ “ appears.

TT 1 TT 2 TT 3 TT 4

[SKIP H]

[SKIP G]

e.g.) DVD

(If the disc has no chapter.)

(

)

/12 S EARCH

Playback will start automatically from the chapter, title

or track you selected.

Note:

Press [the Number buttons] to select your desired

chapter, title or track within 60 seconds.

• [SKIP H / G] are not available when playback is stopped.

(

)

/12 S EARCH

To play back a single-digit chapter, title or track when

there are more than 10 chapters, titles or tracks, press

[ENTER] after entering the chapter, title or track

number.

Playback will start automatically from the chapter, title

or track you selected.

Note:

• Chapter, title or track search can only be performed during

playback or when the unit has kept the resume information.

It cannot be performed in the stop mode.

• The total number of chapters / titles / tracks in your disc;

with less than 10 chapters / titles / tracks, press the chapter /

title / track number directly. To play a double-digit chapter /

title / track, press the chapter / title / track number.

• Track search is not available for programmed or random

playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Time Search

You can select the desired time which the disc is played back from.

Diirreecctt SSeeaarrcchh

Press [the Number buttons] to select your desired

chapter, title or track.

During playback, press [MODE] repeatedly until

“

“ / “

“ appears.

e.g.) DVD

(

)

/12 S EARCH

Use [Cursor K / L] repeatedly until “

“ appears.

Note:

TOTAL

1:29:00

• To select a single-digit chapter, title or track number, press the

number directly.

• To select double digit chapter, title or track number:

If the disc contains more than 9 and less than 100 chapter, title or

track, press [+10] first, then enter the double digit chapter, title or

track number.

Press [the Number buttons] to select your desired

time lapse within 60 seconds.

(e.g., for track 26, press [+10], [2] and [6].)

ꢀRepeat Playback

TOTAL

1:29:00

Repeat function is available only during playback.

During playback, press [MODE] repeatedly until “

appears.

”

(

)

OFF REPEAT

Playback will start automatically from the time you

selected.

Note:

Press [Cursor K / L] to change the repeat mode.

• When there is no need to enter a number, “0” appears

automatically. For example, “0: 0_: _ _” appears in the time

search menu if the total time of the title or track is less than

10 minutes.

DVD

OFF

(repeat off)

• Press [CLEAR] to erase the incorrect input at step 3.

• Time search can only be performed during playback or

when the unit has kept the resume information.

It cannot be performed in the stop mode.

CHAPTER (current chapter repeat)

TITLE

(current title repeat)

OFF

(repeat off)

TRACK

ALL

(current track repeat)

(entire disc repeat)

Press [BACK] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

PERATING DVD

ꢀRepeat A-B Playback

ꢀProgrammed Playback

You can repeat playback between A and B on a disc.

During playback, press [MODE] repeatedly until

You may determine the order in which tracks will play back.

“

” appears.

(

)

OFF A B REPEAT

In stop mode, press [MODE] repeatedly until

“PROGRAM” menu appears.

PROGRAM

CD DA

TOTAL

00 00

Press [ENTER] at your desired starting point (A).

3:31

4:28

4:19

3:58

4:12

4:02

3:55

(

)

A- A B REPEAT

ENTER OK

PLAY

3:31

CLEAR

Use [Cursor K / L] to select a desired track, then press

[ENTER] to store.

Press [ENTER] at your desired ending point (B).

(

)

A-B A B REPEAT

• Additional tracks may be on other screens. Use

[Cursor K /

]

to go on to the next / previous pages.

• Repeat this step until you have selected all the tracks

you wish to play back in the program.

• Point B should be in the same title or track as point A.

• Within a few seconds, the section A-B will begin to

play back repeatedly.

PROGRAM

CD DA

TOTAL

08 22

3:58

15 3:18

16 4:24

ALL CLEAR

To cancel repeat A-B playback, press [MODE]

EN ER/OK

repeatedly until “

“ appears.

PLAY

16 4:24

CLEAR

Press [ENTER] so “OFF” appears.

• Up to 99 tracks can be ordered.

• If 8 or more tracks were in a program, use

[SKIP H / G] to see all the tracks.

Note:

Press [PLAY B] to start programmed playback.

• Repeat setting (except “ALL”) will be cleared when moving to

another title or chapter, track.

• During programmed playback, repeat setting will be

effective for the tracks in the program.

• Repeat playback or repeat A-B playback may not available

with some discs.

•

Repeat A-B playback does not function during other repeat mode.

Note:

• To cancel point A, press [CLEAR] at step 2 in

“Repeat A-B Playback”.

• Press [CLEAR] to erase the last track in the program if you

make an error.

• Stopping playback will cancel repeat A-B playback.

• To erase all programmed tracks at once, select “ALL CLEAR”

and press [ENTER] at step 2.

• While a program is being played back, [STOP C] works as

follows:

ꢀRandom Playback

- Pressing [STOP C] once: The track will be in the resume

standby mode. Next time you press [PLAY B], the playback

will resume from the point where it is stopped in the

programmed playback.

This function shuffles the playing order of tracks instead of playback in the sequence.

- Pressing [STOP C] twice: Resume mode will be canceled.

Next time you press [PLAY B], playback will restart

from the first track in the original order. However, your

programmed playback can be restarted when you follow

the above steps. (Your programs are still stored until either

the disc is ejected or the unit is turned off.)

In stop mode, press [MODE] repeatedly until “RANDOM”

menu appears.

RANDOM

CD DA

TOTAL

45 55

- On some discs, [STOP C] will not work while the resume

message appears. Please wait until the message disappears.

• To repeat the current track in the program, follow the steps 1

and 2 in “Repeat Playback” on page 39 and select “TRACK”.

• To repeat the entire program, follow the steps 1 and 2 in

“Repeat Playback” on page 39 and select “ALL”.

• Turning off the unit or ejecting the disc will erase the

program.

RANDOM PROGRAM

no ndication

PLAY

Press [PLAY B] to start random playback.

• You cannot use [the Number buttons] to select another

track during programmed playback. Use [SKIP H / G] to

select other tracks in the program.

• You cannot combine random playback with programmed

playback.

• You cannot alter a programmed order during playback.

• You can start programmed playback only while in

“PROGRAM” menu.

Note:

• To repeat the current track in the random mode, follow the

steps 1 and 2 in “Repeat Playback” on page 39 and select

“

TRACK”.

• To repeat the entire random selections, follow the steps 1

and 2 in “Repeat Playback” on page 39 and select “ ALL”.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀOn-screen Display

You can check the information about the current disc by pressing [INFO]

on the remote control.

DVD

appears only when multi-

angle is available on the DVD

current playback status

4/12 0:03:21 - 0:02:15

11/16 0:00:00 - 0:03:30

remaining time of the current

chapter

elapsed time of the current

chapter

track

elapsed time of the current track

TR (Track):

current track number /

total tracks

CH (Chapter):

current chapter number /

total chapters

ALL:

current track number /

total tracks

current repeat setting appears only

when the repeat setting is active

T : Track repeat

4/12 0:13:45 - 0:45:40

1/3 0:00:00 - 1:23:45

remaining time of the current title

elapsed time of the current title

A : All tracks repeat

B : A-B repeat

remaining time of the entire disc

TT (Title):

current title number / total titles

elapsed time of the entire disc

layer number, appears only when

playing a 2-layered disc

L0 : Layer 0 is playing

Note:

• When you are playing back an audio CD in program or

L1 : Layer 1 is playing

random mode, “

PROGRAM” (or “

RANDOM”) will be

displayed instead of

current repeat setting appears

only when the repeat setting is

active

ꢀSpecial Settings

Subtitle LLaannguage

C : Chapter repeat

T : Title repeat

B : A-B repeat

DVD

bit rate indication for the amount

of audio and video data currently

being read

This unit allows you to select a subtitle language (if available) during DVD

playback.

During playback, press [MODE] repeatedly until

“

“ appears.

Use [Cursor K / L] repeatedly until your desired

language appears.

(

)

1.ENG / 6 S UBTITLE

subtitles can be varied on the

displayed number.

current subtitles language.

• Each time you press [Cursor K / L], the subtitle

language changes as shown on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

PERATING DVD

OFF

(no subtitles)

Camera Angles

DVD

ENG

(English subtitles)

(French subtitles)

Some DVD may contain scenes which have been shot

simultaneously from various angles. You can change the

camera angle if “ ” appears on the screen. If “ANGLE ICON”

is set to “OFF” in “OTHERS” menu, “ ” will not appear. (Refer

to page 47.)

FRE

Press [BACK] to exit.

During playback, press [MODE] repeatedly until

“

“ appears.

Note:

• To cancel the subtitle, select “OFF” at step 2.

• If your language is not shown after pressing

[Cursor K / L] several times, the disc may not have that

language. However, some discs allow you to change subtitle

languages setting in the disc menu. (Operation varies

depending on the disc, so refer to the manual along with

the disc.)

Use [Cursor K / L] repeatedly until your desired

camera angle appears.

(

)

1 / 8 ANGLE

• When “NOT AVAILABLE” appears on the TV screen, it means

no subtitle is recorded on the scene.

angles can be varied on the

displayed number.

• If you choose a language that has 3-letter-language code,

the code will be displayed every time you change the subtitle

language setting. If you choose any other languages, “---”

will be displayed instead. (Refer to page 48.)

Press [BACK] to exit.

• Ejecting the disc will cancel your subtitle setting.

Audio Laannguage

Black Level Setting

DVD

This unit allows you to select an audio language (if multiple languages are

available) during DVD playback.

Adjust the black level to make the dark areas of the TV picture brighter.

During playback, press [AUDIO] repeatedly until the

desired language appears.

During playback, press [MODE] repeatedly until “

appears.

”

1 ENG Do by D 3/2 1ch 48k/3

(

)

OFF BLACK LEVEL

audio can be varied on the displayed

number.

current audio language.

Press [Cursor K / L] to adjust the black level.

• Each time you press [AUDIO], the audio language

changes as example below.

(

)

ON BLACK LEVEL

ENG

SPA

FRE

(English audio)

(Spanish audio)

(French audio)

ON : Makes the dark areas brighter.

OFF: Shows the original picture as recorded.

Note:

Press [BACK] to exit.

• Some discs will only allow you to change the audio setting

from the disc menu. Refer to the manual accompanying the

discs for details.

• If your language is not shown after pressing [AUDIO] several

times, the disc may not have that language.

However, some discs allow you to change multiple audio

languages setting in the disc menu. (Operation varies

depending on the disc, so refer to the manual along with

the disc.)

Note:

• The setting will be kept even if the unit is turned off.

• When “NOT AVAILABLE” appears on the TV screen, it means

audio language is not available.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Stteerreeoo SSoouunndd MMoode

Maarrkerr Seettuupp

This feature allows you to assign a specific point on a disc to be called back later.

To set a marker

This unit allows you to select a sound mode during CD playback.

During playback, press [MODE] repeatedly until

“

” / “

” appears.

During playback, press [AUDIO] repeatedly until the

desired sound mode appears.

e.g.) DVD

_ _ /12 (S EARCH)

S TEREO

Use [Cursor K / L] repeatedly until marker search

menu appears.

• Each time you press [AUDIO], the sound mode

changes as example below.

10 AC

STEREO (stereo sound with left and

right channels)

(left channel sound only)

L-ch

R-ch

Use [Cursor

60 seconds.

B] to select an available marker within

(right channel sound only)

10 AC

Note:

• Virtual surround cannot be changed when the sound mode

is set to either “L-ch” or “R-ch”.

When the playback reaches the point at which you

want to set a marker, press [ENTER].

• Marker is now set.

Virtual Surround

You can enjoy virtual surround on your 2 channel stereo system.

10 AC

During playback, press [MODE] repeatedly until “

appears.

”

(

)

OFF S URROUND

Press [BACK] to exit.

Press [Cursor K / L] to select the sound level.

To return to the marker later

(

)

S URROUND

Repeat steps 1-2 in “To set a marker”. Use [Cursor

to select the desired marker.

e.g.) DVD

1 :

2 :

Natural effect.

10 AC

Emphasized effect.

OFF : No effects (original sound).

Press [BACK] to exit.

Press [ENTER] at the desired marker to restart playback

from the specific point which you set.

10 AC

Note:

• The setting will be kept even if the unit is turned off.

• For audio CD, virtual surround will not be effective if the

sound mode is set to something other than “STEREO”.

(Refer to “Stereo Sound Mode” on page 43.)

Note:

• Marker search menu will disappear in about 60 seconds

when there is no input.

• Turn down the level or select “OFF” if the sound is distorted.

• You can mark up to 10 points.

• To clear a marker, select the marker to be cleared, and then

press [CLEAR].

• Ejecting the disc or turning off the power will erase all

markers.

• Selecting “

also erase all markers.

” at step 3 in the section “To set a marker” will

Download from Www.Somanuals.com. All Manuals Search And Download.

VD SETTING

Settings are only effective when the unit is in DVD mode and any discs should not be played back.

ꢀDVD Language Setting

You can change the desired language when playing back the disc.

Press [SETUP] to display the main menu.

SUBTITLE *1, *2

Select the desired subtitle language.

(Default: OFF)

PICTURE

S OUND

CHANNEL

DETAIL

LANGUAGE

SUBTITLE

LANGUAGE

DVD

OFF

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

ENTER/OK

SWEDISH

Use [Cursor

] to select “DVD”, then press [ENTER].

Setup

PICTURE

S OUND

Press “ENTER” key to move to DVD Setup

DISC MENU *1

Select the desired language in DVD menu.

(Default: ENGLISH)

CHANNEL

DETAIL

LANGUAGE

DVD

LANGUAGE

DISC MENU

ENGLISH

FRENCH

SPANISH

GERMAN

B] to select“

”, then press [ENTER].

ENTER/OK

ITALIAN

SWEDISH

DUTCH

LANGUAGE

AUDIO

ORIGINAL

OFF

Note:

SUBTITLE

DISC MENU

ENGLISH

• To change the on-screen language, call up “LANGUAGE”

from the main menu and set the desired language.

(Refer to “Language Selection” on page 22.)

ENTER/OK

• Language options are not available with some discs.

• If “OTHER” is selected in “AUDIO”, “SUBTITLE” or

“DISC MENU” menu, press 4-digit number to enter the code

for the desired language. (Refer to “Language Code List”

on page 48.)

Use [Cursor

[ENTER].

] to select the desired item, then press

• Only the languages supported by the disc can be selected.

LANGUAGE

• Language setting for Audio and Subtitle are not available

with some discs.

AUDIO

ORIGINAL

OFF

SUBTITLE

DISC MENU

ENGLISH

Use [MODE] to select subtitles available on the DVD.

Use [AUDIO] to select audio available on the DVD.

ENTER/OK

• If the DVD’s default settings for audio and subtitle are the

same language, the subtitles may not show unless you

turn them on.

Use [Cursor

[ENTER].

] to select the desired item, then press

Press [SETUP] to exit.

AUDIO *1, *2

(Default: ORIGINAL)

Select the desired audio language.

LANGUAGE

AUDIO

ORIGINAL

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

ENTER/OK

SWEDISH

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀDVD Audio Setting

Choose the appropriate audio settings for your equipment. It only affects

during the playback of DVD.

Press [SETUP] to display the main menu.

DOWN SAMPLING

(Default: ON)

PICTURE

S OUND

CHANNEL

DETAIL

This function is available only on digital outputting of a

disc recorded in 96kHz.

LANGUAGE

DVD

AUDIO

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

ENTER/OK

Use [Cursor

] to select “DVD”, then press [ENTER].

Setup

PICTURE

S OUND

Press “ENTER” key to move to DVD Setup

ON : When outputting in 48kHz.

OFF : When outputting the original sound.

CHANNEL

DETAIL

LANGUAGE

DVD

Note:

• When playing back a 96 kHz disc with the copyright

protection or when ‘‘Virtual Surround” is set to “1” or “2”,

the sound will be down sampled at 48 kHz even if the

“DOWN SAMPLING” is set to “OFF”.

B] to select “

”, then press [ENTER].

(Refer to “Virtual Surround” on page 43.)

AUDIO

DOLBY DIGITAL

(Default: BITSTREAM)

DRC

DOWN SAMPLING ON

Set to “BITSTREAM“ when this unit is connected to a

Dolby Digital decoder.

DOLBY DIGITAL

BITSTREAM

ENTER/OK

AUDIO

Use [Cursor

[ENTER].

] to select the desired item, then press

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

ENTER/OK

DRC (dynamic range control)

(Default: ON)

This function is available only on the discs which are

recorded in the Dolby Digital format.

BITSTREAM : Outputs Dolby Digital signals.

PCM :

Converts the Dolby Digital into PCM.

(2 channel)

AUDIO

Press [SETUP] to exit.

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

ENTER/OK

ON : Compress the range between soft and loud

sounds.

OFF : No effects (original sound).

Download from Www.Somanuals.com. All Manuals Search And Download.

VD SETTING

ꢀParental Setting

Parental setting prevents your children from viewing inappropriate

materials. (password protected.) Playback will stop if the ratings exceed

the levels you set.

Use [Cursor

[ENTER].

] to select the desired item, then press

Press [SETUP] to display the main menu.

PARENTAL

PARENTAL LEVEL

PICTURE

S OUND

CHANNEL

DETAIL

ALL

[ ADULT ]

[ NC 17 ]

[ R ]

ENTER/OK

[ PGR ]

[ PG13 ]

[ PG ]

LANGUAGE

DVD

PARENTAL LEVEL

ALL :

8 [ADULT] :

All parental locks are cancelled.

All ratings (adult / general / children)

can be played back.

Use [Cursor

] to select “DVD”, then press [ENTER].

Setup

PICTURE

7 [NC-17]-2 [G] : Only DVD intended for general use

S OUND

Press “ENTER” key to move to DVD Setup

and children can be played back.

1 [KID SAFE] : Only DVD intended for children can

be played back.

CHANNEL

DETAIL

LANGUAGE

DVD

Press [SETUP] to exit.

B] to select “

”, then press [ENTER].

PARENTAL

To change the password

PARENTAL LEVEL ALL

Follow steps 1 to 4. Use [Cursor

] to select

“PASSWORD CHANGE”, then press [ENTER].

ENTER/OK

PARENTAL

Use [the Number buttons] to enter the 4-digit

numbers for your password, then press [ENTER].

PARENTAL LEVEL ALL

PASSWORD CHANGE

ENTER/OK

Use [the Number buttons] to enter the new 4-digit

password.

PARENTAL

Enter current password

ENTER/OK

PARENTAL

PASSWORD

• If you have set password already, use

[the Number buttons] to enter the current 4-digit

password.

• You cannot use the default password (4737) to play back

a DVD.

Please enter

4 digit password

ENTER/OK

Don’t forget the password

Press ‘ENTER/OK’ to activate

password

Use [Cursor

] to select the “PARENTAL LEVEL”, then

Note:

press [ENTER].

• DVD-video may not respond to parental lock settings. Make

sure this function works with your DVD-video.

• Record the password in case you forget it.

PARENTAL

• If you forget the password, press [4], [7], [3], [7], then enter

your new password. Password will be cleared and parental

levels will be set to “ALL”.

PARENTAL LEVEL ALL

PASSWORD CHANGE

• A power failure will not erase your password.

ENTER/OK

Press [SETUP] to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀOthers

You can change the other functions.

Press [SETUP] to display the main menu.

STILL MODE

Set the picture quality in the still mode.

If you select “AUTO”, it automatically selects the best

resolution setting (“FRAME”or “FIELD”) based on the

date characteristics of the pictures.

(Default: AUTO)

PICTURE

S OUND

CHANNEL

DETAIL

LANGUAGE

DVD

FIELD :

The picture in the still mode will be

stabilized.

FRAME : The picture in the still mode will be highly

Use [Cursor

] to select “DVD”, then press [ENTER].

defined.

Setup

PICTURE

S OUND

Press “ENTER” key to move to DVD Setup

OTHERS

CHANNEL

DETAIL

ANGLE ICON

S TILL MODE

AUTO

LANGUAGE

DVD

AUTO POWER OFF ON

ENTER OK

B] to select “

”, then press [ENTER].

AUTO POWER OFF

(Default: ON)

Set to “ON”to turn this unit off automatically after 20

minutes of no use.

OTHERS

ANGLE ICON

S TILL MODE

AUTO

AUTO POWER OFF ON

OTHERS

ENTER/ OK

ANGLE ICON

S TILL MODE

AUTO

AUTO POWER OFF ON

ENTER OK

Use [Cursor

[ENTER].

] to select the desired item, then press

ANGLE ICON

Set to “ON”to show the angle icon when multiple

camera angles are available during DVD playback.

(Default: ON)

Press [SETUP] to exit.

OTHERS

ANGLE ICON

S TILL MODE

AUTO

AUTO POWER OFF ON

ENTER/ OK

Download from Www.Somanuals.com. All Manuals Search And Download.

VD SETTING

ꢀReset to the Default Setting

ꢀLanguage Code List

You can reset all the settings except for the parental setting and on-screen

Language

Code

Language

Marathi

Code

5964

5961

5960

6047

6051

6061

A-B

menu language.

Abkhazian

Afar

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Moldavian

Mongolian

Nauru

Nepali

Norwegian [NOR]

Press [SETUP] to display the main menu.

Afrikaans

Albanian

Amharic

Arabic

PICTURE

S OUND

CHANNEL

DETAIL

Armenian

Assamese

Aymara

O-R

Occitan

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish [POL]

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

Sindhi

Singhalese

Siswat

Slovak

Slovenian

Somali

Spanish [SPA]

Sundanese

Swahili

Swedish [SWE]

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

Azerbaijani

Bashkir

LANGUAGE

DVD

Basque

Bengali;Bangla

Bhutani

Bihari

Use [Cursor

] to select “DVD”, then press [ENTER].

Bislama

Breton

Setup

Bulgarian

Burmese

Byelorussian

PICTURE

S OUND

Press “ENTER” key to move to DVD Setup

CHANNEL

DETAIL

C-E

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

LANGUAGE

DVD

Chinese [CHI]

Corsican

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

6565

6557

6558

6561

5165

6567

6569

6568

Croatian

Czech [CZE]

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

B] to select “

”, then press [ENTER].

F-H

INITIALIZE

Faroese

Fiji

5261

5256

5255

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

Initialize?

Finnish [FIN]

French [FRE]

Frisian

YES

ENTER/OK

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Use [Cursor

] to select “YES”, then press [ENTER].

Gujarati

Hausa

Hebrew

Hindi

INITIALIZE

Hungarian [HUN]

Tagalog

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

I-K

Initialize?

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

YES

ENTER/OK

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

Note:

• When you want to cancel the initialization, select “NO” at

step 4, then press [ENTER].

Kannada

Tsonga

Kashmiri

Turkish [TUR]

Turkmen

Twi

Kazakh

Kinyarwanda

Kirghiz

Press [SETUP] to exit.

Kirundi

U-Z

Korean [KOR]

Kurdish

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

L-N

Laothian

Latin

5861

5847

5868

5860

5866

5957

5953

5965

5958

5966

5955

Latvian;Lettish

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Note:

• If you choose a language that has a 3-letter abbreviation,

the code will be displayed every time you change the audio

or subtitle language setting above. If you choose any other

language, ‘---’ will be displayed instead. (3-letter abbreviation is

written in bracket.)

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ROUBLESHOOTING

ꢀFAQ

Question

Answer

• Check the antenna or cable connection to the main unit.

• Check the batteries of the remote control.

• Check if there is an obstacle between the infrared sensor window and the

remote control.

• Test the signal output. If OK, then possible infrared sensor trouble.

(Refer to “IR Signal Check”on page 52.)

My remote control does not work.

What should I do?

• Aim the remote control directly at the infrared sensor window on the

front of the unit.

• Reduce the distance to the unit.

• Re-insert the batteries with their polarities (+/– signs) as indicated.

• When there is an infrared-equipped device such as PC near this unit, it

may interrupt the remote control signal of this unit.

• Move the infrared-equipped device away from this unit, change the angle

of the infrared sensor or turn off the infrared communication function.

How come the Initial setup appears every

time I turn on this unit?

• Connect the RF coaxial cable to the unit directly and run the initial setup.

• Make sure to complete the channel scan before turning off the unit.

• Make sure autoscan has been completed.

(Refer to “Autoscan”on page 20.)

• Autoscan must be completed when you set up the unit for the first

time or move it to a location where previously unavailable channels are

broadcast.

• The selected channel may not be broadcasting.

• When autoscan is interrupted and not completed,

some channels will not be received. Make sure to complete.

(Refer to “Autoscan”on page 20.)

Why I cannot watch some TV programs?

• The selected channel cannot be viewed by the “Child Lock”setting.

(Refer to ‘‘Child Lock”on page 28.)

• The unit requires some kind of antenna input. An indoor antenna (VHF /

UHF), an external antenna (VHF /UHF) or an RF coaxial cable from your wall

cable/satellite box needs to be plugged into the unit.

• Check if the right input mode is selected by pressing [INPUT SELECT] or

]. (Refer to“Switching Each Input Mode”on page 17.)

using [CHANNEL

How come there is no image from the

connected external devices?

• Check the antenna or cable connection to the unit.

• When using the Composite Video Connection check that the Green

(Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their

corresponding colored jacks on the unit.

• Many digital channels have alternate channel numbers. The unit changes

the numbers automatically to the ones signifying the broadcasting

stations. These are the numbers used for analog broadcasts.

Whenever I entered channel number,

it changes automatically.

• Clean the disc.

• Ensure the disc is correctly inserted.

• Check if the disc is defective by trying another disc.

• Cancel the parental lock or change the control level.

• Insert a correct disc that plays back on this unit.

• Handle a disc with special care so that it does not have fingerprints,

scratches or dusts on its surface.

My disc cannot be played back.

Is there any way I can play my disc?

• Captions that are delayed a few seconds behind the actual dialogue are

common for live broadcasts. Most captioning production companies can

display a dialogue to maximum of 220 words per minute. If a dialogue

exceeds that rate, selective editing is used to insure that the captions

remain up-to date with the current TV screen dialogue.

Why are captions not displayed entirely?

Or, captions are delayed behind the

dialogue.

How can I set the clock ?

• There is no clock function on this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

ROUBLESHOOTING

ꢀTroubleshooting Guide

If the unit does not perform properly when operated as instructed in this manual,

check the following chart and all connections once before calling for service.

Symptom

Remedy

• Make sure the AC power cord is plugged in.

• Make sure that the AC outlet supplies the proper voltage, plug another electrical

appliance into the AC outlet.

• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit

to reset itself.

No power

• Press only one button at a time. Do NOT press more than one buttons at the same

time.

Control button does not work.

• Check whether the connection of the antenna, cable receiver or satellite box is

connected correctly.

• Check whether all the cables to the unit are connected to the correct output jack

of your device like BD/DVD recorder.

• Make sure that the selected input mode is connected to the working input jack.

• Check if your computer is NOT in sleep mode when the input mode of this unit is

in PC mode. Tap any key on the keyboard to wake up your computer.

Power is ON but no screen

image.

• Check if the power is on.

• Check if the right input mode is selected.

• Check whether all the cables to the unit are connected to the correct output jack

of your device like BD/DVD recorder.

• View other TV channels. The problem might be limited to the broadcasting station.

• Turn off the unit and wait for about 1 minute, then turn on the unit again.

• Check whether the connection of the antenna, cable receiver or satellite box is

connected correctly.

No picture or sound

• Make sure that the selected input mode is connected to the working input jack.

• Check if your computer is NOT in sleep mode when the input mode of this unit is

in PC mode. Tap any key on the keyboard to wake up your computer.

• Make sure that the sound is not muted. Press [MUTE] so that the volume bar and

current volume level will appear on the TV screen.

] to

• Make sure that the volume is NOT set to “0”or “Mute”. If so, use [VOLUME

adjust the desired volume.

• View other TV channels. The problem might be limited to the broadcasting station.

• Adjust “Color”in the main menu.

No color

Adjusted ‘‘PICTURE”or ‘‘SOUND” • You must set ”Home”in ”Location”(Refer to page 33).

is not effective every time turn

on the unit.

Otherwise, the settings you adjusted will not be memorized after you turn off the

unit.

• Electrical interference from nearby appliances may affect picture quality.

• Adjust “Contrast”and “Brightness”in the main menu.

• View other TV channels. The problem might be limited to the broadcasting station.

• For the best picture quality, watch “high definition”wide screen programs.

If the HD content is not available, watch “standard definition”programs instead.

Sound OK, picture poor

• View other TV channels. The problem might be limited to the broadcasting station.

• Check if the audio cable is connected in correctly .

Picture OK, sound poor

• You may be getting interference from electrical appliances, automobiles,

motorcycles or ﬂuorescent lights.

• Try moving the unit to another location to see if this is the cause of the problem.

You see a distorted picture or

hear an unusual sound.

Ghosts, lines or streaks in

picture

• Electrical interference from nearby appliances may affect picture quality.

• View other TV channels. The problem might be limited to the broadcasting station.

• When the capabilities of the unit exceed the capabilities of the digital

broadcasting, the signal will be increased to match the capabilities of the display

of the unit. This may cause noise or trash.

You see “noise”or “trash”on the

screen.

Different color marks on the TV

screen

• View other TV channels. The problem might be limited to the broadcasting station.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Symptom

Remedy

• This unit will memorize the volume level from the last time you adjusted it.

• If the volume of the sound from another device is higher or lower, then the

loudness will change.

You switch to a different input

and the volume.

You switch to a different input • This unit will memorize the viewing mode from the last time you used the

and the screen size changes.

particular input modes.

• If you are using the unit as a PC monitor, make sure that “Horizontal Position”and

“Vertical Position”in “PC Settings”are set correctly.

• If you are watching TV or using the video, S-video, component video or HDMI with

480i input, press [SCREEN MODE] repeatedly to switch various screen modes.

The display image does not

cover the entire screen.

Captions are displayed as a

white box.

No caption is displayed in the

Closed Caption-supported

program.

• Interference from buildings or weather conditions may cause captioning to be

incomplete.

• Broadcasting station may shorten the program to insert advertisement.

The closed caption decoder cannot read the information of the shortened

program.

No caption is displayed when

playing back a disc or a cassette

tape containing captions.

• The disc or cassette tape may be illegally copied, or the caption signal might not

have been read during copying.

Black box is displayed on the TV

screen.

• The text mode is selected for caption. Select “CC1”, “CC2”, “CC3”, “CC4”or “Off”.

• Make sure the disc is compatible with the unit.

Completely distorted picture or

black/white picture with DVD.

Picture freezes momentarily

during playback.

• Check the disc for finger prints/scratches and clean with a soft cloth wiping from

center to edge.

• Clean the disc.

• Ensure the disc is correctly inserted.

• Check if the disc is defective by trying another disc.

• Cancel the parental lock or change the control level.

• Insert a correct disc that plays on this unit.

• Handle a disc with special care so that it does not have fingerprints, scratches, or

dusts on its surface.

Disc cannot be played.

Buttons do not work or the unit • To completely reset the unit, unplug the AC power cord from the power outlet for

stops responding.

5-10 seconds.

The unit does not respond to

some operating commands

during playback.

• Operations may not be permitted by the disc. Refer to the instructions of the disc.

• The angle cannot be switched for DVD which do not contain multiple angles. In

some cases multiple angles are only recorded for specific scenes.

Angle does not switch.

Playback does not start when

the title is selected.

• Check the “PARENTAL”setting.

The password for rating level

has been forgotten.

• Enter the default password “4737”, then your forgotten password will be cleared.

Note:

• The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of

blue, green or red. This is not to be considered a defect in the LCD screen.

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on

correct operations.

• Some functions are prohibited on some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

NFORMATION

ꢀGlossary

ATSC

Dolby Digital

Region Code

Acronym that stands for Advanced

Television Systems Committee and the

The system developed by Dolby

Laboratories to compress digital sound. It

Regions associate discs and players with

particular areas of the world.

name of the digital broadcasting standards. offers stereo sound (2ch) or multi-channel

This unit will only play back discs that have

compatible region codes.

You can find the region code of your unit

by looking on the rear panel.

Some discs are compatible with more than

one region (or all regions).

audio.

Aspect Ratio

HDMI (High-Definition Multimedia

Interface)

Interface that supports all uncompressed,

digital audio/video formats including

set-top box, BD/DVD recorder or digital

television, over a single cable.

The width of a TV screen relative to its

height. Conventional TVs are 4:3 (in other

words, the TV screen is almost square);

widescreen models are 16:9 (the TV screen

is almost twice as wide as its height).

SAP (Secondary Audio Program)

Second-audio channel delivered separately

from main-audio channel. This audio

channel is used as an alternate in bilingual

broadcasting.

CEC (Consumer Electronics Control)

HDTV (High Definition TV)

Ultimate digital format that produces high

resolution and high picture quality.

This allows you to operate the linked

functions between our brand devices with

CEC feature and this unit.

SDTV (Standard Definition TV)

Standard digital format that is similar to the

NTSC picture quality.

Component Video

NTSC

This is a video signal format that conveys

each of 3 principal colors of light (red,

blue and green) through different signal

lines. This allows the viewers to experience

picture colors as original as it is. There are

several signal formats, including Y / Pb / Pr

and Y / Cb / Cr.

Acronym that stands for National Television

Systems Committee and the name of the

current analog broadcasting standards.

Off the air NTSC signals will no longer be sent

by broadcasting stations after Feb 17, 2009.

S-video

Offers higher quality images by delivering

each signal, color (c) and luminance (y)

independently of each other through a

separate cable.

Password / PIN Code

A stored 4-digit number that allows access

to parental control features.

ꢀMaintenance

Cabinet Cleaning

• Wipe the front panel and other exterior surfaces of the

unit with a soft cloth immersed in lukewarm water and

wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide

liquid near the unit. Such chemicals may cause damage

and discoloration to the exposed surfaces.

Servicing

Should your unit become inoperative, do not try to correct

the problem yourself. There are no user serviceable parts

inside. Turn off the unit, unplug the AC power cord and call

our toll free customer support line found on the cover of

this manual to locate an authorized service center.

If the Laser Optical Pickup Unit is Dirty

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before

cleaning the panel, disconnect the AC power cord.

If the unit still does not perform properly when it is

operated, while referring to the relevant sections and to

"Troubleshooting Guide" in this owner’s manual, the laser

optical pickup unit may be dirty. Consult your dealer or an

Authorized Service Center for inspection and cleaning of

the laser optical pickup unit.

Disc Handling

Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

IR Signal Check

If the remote control is not working properly, you can use

a digital camera (including a cellular phone with built-in

camera) to see if it is sending out an infrared signal.

• Always store the disc in its protective case when it is not

used.

• With a digital camera

(including built-in cell phone cameras):

Point the Digital Camera towards the

remote control infrared diode at the front

of the remote control. Press any button on

the remote control and look through the

camera display. If the infrared pulsating

light appears through the camera, the

remote control is sending out an IR signal.

• To clean-off, use a soft cloth.

• Do not use a hard cloth since this will mar the disc.

• Wipe the disc in a straight line form center to edge.

• Never wipe with a circular motion.

• Do not use detergent or abrasive cleaning agents.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ꢀCable Channel Designations

If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations.

Please check with your local cable company. The following is a chart of common cable channel designations.

CATV channel

TV Display

CATV channel

TV Display

W+1 W+2 W+3 W+4 W+5 W+6

37 38 39 40 41 42

CATV channel

TV Display

W+7 W+8 W+9 W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24 W+25 W+26 W+27

43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

^{CATV channel}W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39 W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48

TV Display

^{CATV channel}W+49 W+50 W+51 W+52 W+53 W+54 W+55 W+56 W+57 W+58 A-5 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64

TV Display

100 101 102 103 104 105

W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79 W+80 W+81 W+82 W+83 W+84 W+85

CATV channel

TV Display 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126

CATV channel

W+86 W+87 W+88 W+89 W+90 W+91 W+92 W+93 W+94

127 128 129 130 131 132 133 134 135

TV Display

ꢀGeneral Specifications

ꢀOther Specifications

Terminals:

Antenna input: VHF/UHF/CATV

Audio input: RCA jack (L/R) x 6

Video input: RCA jack x 1

S-video input: Mini DIN 4-pin jack x 1

75Ω unbalanced (F-type)

500mV rms

TV format:

Closed caption system:

§15.122/FCC (digital CC)

§15.119/FCC (analog CC)

ATSC / NTSC-M TV standard

1V p-p (75Ω)

Y: 1V p-p (75Ω)

C: 286mV p-p (75Ω)

Channel coverage (ATSC/NTSC):

Terrestrial

CATV

VHF: 2~13 UHF: 14~69

2~13, A~W,

Component video input:

RCA jack x 3

1V p-p (75Ω)

W+1~W+94 (analog W+1~W+84),

A-5~A-1, 5A

Pb/Cb:700mV p-p (75Ω)

Pr/Cr: 700mV p-p (75Ω)

Tuning system:

Channel access:

Channel frequency synthesized tuning system

Direct access keyboard,

HDMI input: HDMI 19pin x 2

PC input:

D-Sub 15pin x 1 (RGB)

Mini jack ø3.5mm x 1 (audio)

Programmable scan, and up/down

Coaxial digital audio output:

RCA jack x1

DVD

500mV p-p (75Ω)

Discs (playback compatibility):

DVD-video, DVD-RW/-R,

audio CD, CD-RW/-R

Headphone: ¹/8 inches x 1 (3.5mm)

Remote control: Digital encoded infrared light system

Operating temperature:

41°F (5°C) to 104°F (40°C)

Frequency response:

DVD (linear sound): 20 Hz to 20 kHz (sample rate: 48 kHz)

20 Hz to 44 kHz (sample rate: 96 kHz)

CD:

20 Hz to 20 kHz

Power requirements:

Signal-to-noise ratio (S/N ratio):

CD: 90 dB (JEITA)

Total distortion factor:

120V~ AC +/- 10%, 60Hz +/- 0.5%

Power consumption (maximum):

DVD:

CD:

1 KHz 0.007% (JEITA)

65W

LCD:

Dimensions:

19 inches class (18.5 inches measured diagonally)

ꢀElectrical Specification

W: 18.8 inches (477.5mm) 18.8 inches (477.5mm)

H: 13.1 inches (330.4mm) 14.5 inches (365.8mm)

D: 5.4 inches (134.7mm) 8.3 inches (210.0mm)

Sound Output:

1W, 16Ω x 2

Weight:

9.1 lbs.

(4.1kg)

10.0 lbs. (4.5kg)

• Designs and speciﬁcations are subject to change without notice and without

our legal obligation.

• If there is a discrepancy between languages, the default language will be

English.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not attempt to service the product yourself

Download from Www.Somanuals.com. All Manuals Search And Download.

JVC Loves the Earth

JVC COMPANY OF AMERICA

Division of JVC Americas Corp.

1700 Valley Road

Wayne, New Jersey, 07470

Printed in China

A94N5UH

1EMN24939 ★★★★★

Download from Www.Somanuals.com. All Manuals Search And Download.

Intel Computer Hardware 05 2065 003 User Manual
IOGear Computer Drive GHE835C User Manual
Jasco Universal Remote 24904 User Manual
JBL Professional Air Cleaner MPC XU User Manual
Jenn Air Cooktop CVGX242 User Manual
JVC Home Theater System TH F3 User Manual
JVC Network Hardware SA DV6000 User Manual
JVC Projection Television AV 56WP30 User Manual
Keating Of Chicago Fryer APR 96 User Manual
Kobe Range Hoods Ventilation Hood CH7630SQB User Manual