JVC Flat Panel Television 0505TNH II IM User Manual

LCD Flat Television Users Guide  
For Models:  
LT-40X776  
LT-37X776  
LT-32X776  
LT-26X776  
Illustration of LT-32X776 and RM-C14G  
Important Note:  
In the spaces below, enter the model and serial number of your television (located at the  
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this  
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton  
and original packaging for future use.  
Model Number:  
LCT1881-001B-A  
0505TNH-II-IM  
Serial Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product incorporates copyright protection technology that is protected by U.S. patents  
and other intellectual property rights. Use of this copyright protection technology must  
be authorized by Macrovision, and is intended for home and other limited viewing uses  
only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is  
prohibited.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's  
instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and  
a third grounding prong. The wide blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as  
vases, shall be placed on the apparatus.  
16) Avoid improper installation and never position the unit where good ventilation is impossible. When  
installing this TV, distance recommendations must be maintained between the set and the wall,  
as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance  
guidelines shown for safe operation.  
200 mm  
200 mm  
50 mm  
150 mm  
150 mm  
17) Cautions for installation  
— Do not tilt the TV towards the left or right, or towards the back.  
— Install the TV in a corner on the floor so as to keep cords out of the way.  
— The TV will generate a slight amount of heat during operation. Ensure that sufficient space is  
available around the TV to allow satisfactory cooling.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
Avoiding Ghost Images  
Displaying xed images for extended periods of time can leave a subtle but temporary ghost  
image on your screen. To avoid this, mix your viewing pattern.  
Examples include, but are not limited to the following:  
For example...  
• Stock-market report bars  
• Shopping channel logos and pricing  
displays  
TV on  
TV off  
• Video game patterns or scoreboards  
• Bright station logos  
• Internet web sites or other computer-style  
images.  
• DVD discs, video tapes, laser discs  
• Broadcast, cable, satellite channels or  
digital television tuners/converters.  
XYZ  
XYZ  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly  
moistened with water. You can add a few drops of mild liquid detergent to the water to help  
remove spots of oily dirt.  
• DO NOT allow liquid to enter the TV through the ventilation slots.  
• DO NOT use strong or abrasive cleaners on the TV.  
• DO NOT spray liquids or cleaners directly on the TV’s surface.  
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a  
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner  
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.  
These will remove the coating layer and cause discolorations.  
Do not push or hit the screen. This could cause scratches on the screen surface and image  
distortions.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings (Continued...)  
How to move the cabinet  
Your fingers may become trapped under  
the TV, causing injuries. Hold the TV at the  
bottom in the middle, and do not allow the TV  
to tilt up or down.  
The TV may fall causing injuries. Hold the  
bottom of the stand with your hand and tilt  
the TV up or down.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Safety Precautions . 2  
Warnings . . . . . . . . . . . . 5  
Quick Setup . . . . . . . . . . . 9  
Unpacking your TV . . . . . . . . . . . . 9  
TV Models . . . . . . . . . . . . . . . . 10  
TV Remote Control . . . . . . . . . . . 11  
Getting Started . . . . . . . . . . . . . 12  
Using the Stand . . . . . . . . . . . . 12  
The Remote Control . . . . . . . . . . 14  
Sound Adjust . . . . . . . . . 56  
Sound Settings . . . . . . . . . . . . . 56  
Adjust Sound Settings . . . . . . . . . 56  
Reset  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
56  
Clock Timers . . . . . . . . . . 57  
Set Clock . . . . . . . . . . . . . . . . 57  
On/Off Timer . . . . . . . . . . . . . . . 58  
Button Functions . . . . . . . 59  
Multi Screen Function . . . . . . . . . . 59  
Index . . . . . . . . . . . . . . . . . . 59  
Twin . . . . . . . . . . . . . . . . . 59  
Freeze . . . . . . . . . . . . . . . . . . 60  
Swap . . . . . . . . . . . . . . . . . 60  
Select . . . . . . . . . . . . . . . . . . 60  
Power . . . . . . . . . . . . . . . . . . 61  
Number Buttons . . . . . . . . . . . . . 61  
Connecting Your Devices  
.
.
.
.
.
.
.
15  
Interactive Plug In Menu . . . . . . . . 25  
Remote Programming . . . . . 28  
Setting CATV, VCR and DVD Codes  
.
.
.
28  
CATV or Satellite Codes . . . . . . . . 28  
VCR Codes . . . . . . . . . . . . . . 29  
DVD Codes . . . . . . . . . . . . . . 30  
Search Codes . . . . . . . . . . . . . 31  
Tune  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
61  
Input . . . . . . . . . . . . . . . . . . . 61  
TheaterPro D6500K . . . . . . . . . . . 61  
Return+/TV . . . . . . . . . . . . . . . 62  
Sound . . . . . . . . . . . . . . . . . . 62  
Muting . . . . . . . . . . . . . . . . . . 63  
Video Status . . . . . . . . . . . . . . . 63  
Natural Cinema . . . . . . . . . . . . . . . 63  
Sleep Timer . . . . . . . . . . . . . . . 64  
ML/MTS . . . . . . . . . . . . . . . . . 64  
Display . . . . . . . . . . . . . . . . . 65  
C.C. . . . . . . . . . . . . . . . . . . . 65  
Onscreen Menus . . . . . . . . 32  
Using the Guide . . . . . . . . . . . . . 32  
Onscreen Menu System . . . . . . . . . 33  
Initial Setup . . . . . . . . . . 35  
Auto Tuner Setup . . . . . . . . . . . . 35  
Channel Summary . . . . . . . . . . . . 36  
V-Chip . . . . . . . . . . . . . . . . . . 38  
Set Lock Code . . . . . . . . . . . . . 44  
Auto Demo . . . . . . . . . . . . . . . 45  
Channel +/-  
Volume +/-  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
65  
65  
Illumination  
.
.
.
.
.
.
.
.
.
.
.
.
.
45  
.
.
.
Language . . . . . . . . . . . . . . . . 45  
Closed Caption . . . . . . . . . . . . . 46  
Auto Shut Off . . . . . . . . . . . . . . 48  
XDS ID . . . . . . . . . . . . . . . . . 48  
Noise Muting . . . . . . . . . . . . . . 49  
Front Panel Lock . . . . . . . . . . . . 49  
Favorite . . . . . . . . . . . . . . . . . 66  
Aspect . . . . . . . . . . . . . . . . . 67  
Aspect Ratios  
.
.
.
.
.
.
.
.
.
.
.
.
.
68  
Menu . . . . . . . . . . . . . . . . . . 68  
OK . . . . . . . . . . . . . . . . . . . 68  
Back . . . . . . . . . . . . . . . . . . . 68  
TV/CATV Slide Switch . . . . . . . . . . 69  
VCR/DVD Slide Switch . . . . . . . . . 69  
VCR Buttons . . . . . . . . . . . . . . . 69  
DVD Buttons . . . . . . . . . . . . . . . 69  
Light . . . . . . . . . . . . . . . . . . . 69  
V1 Smart Input  
Video Input Label  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
50  
50  
Position Adjustment . . . . . . . . . . . 51  
Power Indicator . . . . . . . . . . . . . 51  
Video-1 Monitor Out  
.
.
.
.
.
.
.
.
.
.
51  
Digital-In . . . . . . . . . . . . . . . . . 52  
Digital-In Audio . . . . . . . . . . . . . 52  
Picture Adjust . . . . . . . . . 53  
Picture Settings . . . . . . . . . . . . . 53  
Adjust Picture Settings . . . . . . . . . 53  
Color Temperature . . . . . . . . . . . . 53  
Digital Noise Clear . . . . . . . . . . . . 54  
Color Management  
Dynamic Gamma  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
54  
54  
.
.
.
.
.
.
Smart Picture . . . . . . . . . . . . . . 55  
Reset . . . . . . . . . . . . . . . . . . 55  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Digital Setup . . . . . . . . . 70  
Digital Setup . . . . . . . . . . . . . 70  
Antenna Level . . . . . . . . . . . . . 70  
Digital Sound . . . . . . . . . . . . . 71  
Aspect Ratio . . . . . . . . . . . . . 71  
Cable Card Application . . . . . . . . . 72  
i.LINK Auto Play . . . . . . . . . . . 72  
Software Update . . . . . . . . . . . 72  
Digital Button Functions . . . 73  
Digital CH D/A (Digital/Analog) . . . . . 73  
Sub Channel . . . . . . . . . . . . . 73  
i.LINK Menu . . . . . . . . . . . . . . . 74  
Controller . . . . . . . . . . . . . 74  
Device . . . . . . . . . . . . . . 75  
Timer . . . . . . . . . . . . . . . 76  
Reservation . . . . . . . . . . . . . . 76  
Timer Edit . . . . . . . . . . . . . . 77  
Guide . . . . . . . . . . . . . . . 78  
Media Card Viewer . . . . . . 79  
Readable Media Card . . . . . . . . . 79  
Supported Card Media . . . . . . . . . . . 79  
How to insert Media Card . . . . . . . . 80  
How to operate Media Card Viewer . . . . 81  
PHOTO  
VIDEO  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
82  
82  
83  
84  
.
.
.
FILE  
.
.
.
.
.
Operation Note  
Specifications for Media Card Viewer . . 85  
OSD Information . . . . . . 86  
Weak Signal . . . . . . . . . . . . . 86  
No Program . . . . . . . . . . . . . 86  
Cable Card Information . . . . 87  
Cable Card Connection . . . . . . . . 87  
Appendices . . . . . . . . . . 88  
Troubleshooting . . . . . . . . . . . . . 88  
Warranty  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
90  
Specifications . . . . . . . . . . . . . 92  
Notes . . . . . . . . . . . . . . . . . 94  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your  
new television, please check to make sure you have all of the following items. In addition to  
this guide, your television box should include:  
Two AA  
Batteries  
1 Remote Control  
1 Television  
POWER  
TV CATV VCR DVD  
ASPECT  
MULTI SCREEN  
TWIN  
INDEX SELECT SLEEP  
FREEZE  
SWAP ML/MTS DISPLAY  
+
INPUT  
1
4
2
5
8
0
3
6
D/A  
i.LINK MENU  
7
9
RETURN+  
TV  
TIMER  
TUNE  
THEATER  
PRO  
VIDEO  
STATUS  
SUB  
CHANNEL  
FAVORITE  
SUB  
NATURAL  
CINEMA  
SOUND  
LIGHT  
C.C.  
Note: Your television  
and/or remote  
MUTING  
GUIDE  
CH  
VOL  
VOL  
OK  
CH  
control may differ  
from the examples  
illustrated here.  
MENU  
BACK  
VCR CHANNEL  
PREV NEXT  
VCR DVD  
POWER TV VCR  
REW  
PLAY  
FF  
REC  
STOP  
PAUSE  
OPEN CLOSE  
STILL PAUSE  
RM-C14G  
2-WAY SPLITTER  
Two Way Splitter x 1  
RF Cable × 2  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Models  
NOTE: Before you connect your television to another device, please refer to the proper  
diagrams for your specific TV and remote. These will help assist you in understanding  
how to connect your television to another device, as well as use the remote to set up  
your television.  
Rear Panel Diagram  
75Ω  
(VHF/UHF)  
75Ω  
(VHF/UHF)  
S-VIDEO  
VIDEO  
R
-
AUDIO  
-
L
S-VIDEO  
VIDEO  
R
-
AUDIO  
-
L
NPUT1  
I
ATSC  
/
DIGITAL CABLE IN  
VIDEO  
R
-
AUDIO  
-
L
Y
Pr  
R
Pb  
DIGITAL-IN  
-
AUDIO  
-
L
CABLE CARD  
S-VIDEO  
VIDEO  
i
.
L
I
N
K
I
N
/
O
U
T
S400(TS)  
R
-
AUDIO  
-
L
NPUT2  
I
OPTICAL OUT  
Digital Audio  
SC  
AT  
/
CABLE IN  
AL  
DIGIT  
INPUT3  
DIGITAL-IN  
IU1CMPOENT  
GTLNAUDIO  
CABLE CARD  
MNI/RECOUT  
ADIOUT  
Side Panel Diagram  
POWER  
PROGRAM/TIMER  
MEDIA CARD SLOT  
Illumination Lamp  
(Page 45)  
POWER  
PROGRAM/TIMER  
Note:  
• Media Card slot is for LT-40X776 ONLY. To open the door, gently press the "PUSH OPEN".  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Remote Control  
POWER  
TV CATV VCR DVD  
ASPECT  
MULTI SCREEN  
TWIN  
INDEX SELECT SLEEP  
FREEZE  
SWAP ML/MTS DISPLAY  
+
INPUT  
1
4
2
5
8
0
3
6
D/A  
i.LINK MENU  
7
9
RETURN+  
TV  
TIMER  
TUNE  
THEATER  
PRO  
VIDEO  
STATUS  
SUB  
CHANNEL  
FAVORITE  
SUB  
NATURAL  
CINEMA  
SOUND  
LIGHT  
C.C.  
MUTING  
GUIDE  
CH  
VOL  
VOL  
OK  
CH  
MENU  
BACK  
VCR CHANNEL  
PREV NEXT  
VCR DVD  
POWER TV VCR  
REW  
PLAY  
FF  
REC  
STOP  
PAUSE  
OPEN CLOSE  
STILL PAUSE  
RM-C14G  
RM-C14G  
Notes:  
• For information on remote control buttons, see pages 59 - 69 and 73 - 78.  
• i.LINK MENU, TIMER, SUB CHANNEL, FAVORITE and GUIDE buttons are for digital  
channels. If your TV is connected to an ATSC antenna or Digital Cable, you can use these  
buttons.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Getting Started  
These quick setup pages will provide you, in four easy steps, with the basic information you  
need to begin using your new television right away.  
If you have questions, or for more detailed information on any of these steps, please consult  
other sections of this manual.  
Step 1 - Using the stand  
This TV comes with a Table Top Stand already attached.  
This stand can be used to adjust the direction of the TV screen 5° up, 10° down and 20° to the  
left or right.  
These illustrations are for LT-26X776 and LT-32X776. The stands for the LT-37X776  
and LT-40X776 are different. You can only adjust the direction of the TV screen 20º to  
the left or right.  
Tilt the TV up or down  
While holding the bottom of the stand with one hand,  
use your other hand to hold the middle of the top of the  
TV, and slowly tilt the TV up or down.  
• As a safety measure, the stand is constructed so that  
it requires a certain amount of force to tilt the TV.  
Rotate the TV left or right  
While holding the bottom of the stand with one hand,  
use your other hand to hold the edge of the panel  
and slowly adjust the direction of the TV stand.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Cable Holder  
A cable holder which keeps your connection cables tidy is attached on the back of the stand.  
Gently squeeze the left and right of the cable holder, and pull it to remove it from the stand.  
After putting the cables in the cable holder, attach it to the back of the stand again.  
Cable Holder  
Illustration of LT-32X776 and LT-26X776  
Illustration of LT-37X776 and LT-40X776  
Remove the terminal cover  
There are connection terminals behind the covers on the left and right in the back of the TV.  
Remove these two covers before connecting an antenna or other devices. The covers can  
be removed by removing the hooks. When replacing the covers, place the side of the covers  
against the TV and insert the hooks.  
Note:  
• Leave the terminal covers off if they do not fit properly. Do not force to replace the covers.  
Doing so may damage the connection cables and covers.  
Illustration of  
Illustration of  
LT-32X776 and LT-26X776  
LT-37X776 and LT-40X776  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
Step 2 – The Remote Control  
Before you can operate your remote control, you  
first need to install the batteries (included).  
Slide the cover on the back of the remote down  
towards the bottom of the remote control. Insert  
two batteries (included) carefully noting the “+”  
and “–” markings, placing the “–” end in the unit  
first. Slide the cover back into place.  
When you change the batteries, try to  
complete the task within three minutes. If you  
take longer than three minutes, the remote  
control codes for your VCR, DVD, and/or  
cable box/satellite receiver may have to be  
reset. See pages 28 - 31.  
Key Feature Buttons  
The four key feature buttons at the center of the remote can be  
used for basic operation of the television. The top and bottom  
buttons will scan forward and back through the available  
channels. To move rapidly through the channels using  
JVC’s Hyperscan feature, press and hold CH+ or CH–. The  
channels will zip by at a rate of five channels per second. The  
right and left buttons will turn the volume up or down. These  
buttons are also marked with four arrows and are used with  
JVC’s onscreen menu system. To use the onscreen menus,  
press the MENU button.  
MUTING  
GUIDE  
CH  
OK  
CH  
VOL  
VOL  
MENU  
BACK  
POWER  
Basic Operation  
T
Turn the television on and off by pressing the POWER button at the top right corner  
of the remote. If this is the first time you are turning on the TV, the interactive  
plug-in menu appears.  
TV CATV  
VCR DVD  
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if  
you need to operate a cable box.  
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to  
DVD to control a DVD player. Please see pages 28 to 31 for instructions on  
programming your remote control to operate a cable box, VCR or DVD player.  
A
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Step 3 - Connecting your devices  
To make these connections, you will use plugs like the ones illustrated below.  
S-Video Cable  
Component Cables  
Composite Cables  
Audio Cables  
Used to make video  
connections with S-Video  
VCRs, Camcorders and DVD  
players.  
Used to connect audio/video  
devices like VCRs, DVD players,  
stereo amplifiers, game consoles,  
etc.  
Notes:  
• These connections are examples.  
• After you are finished connecting your devices, plug the power cord into the nearest power  
outlet and turn on the TV.  
• If you follow these diagrams and the television does not work properly, contact your local  
cable operator.  
To connect a DVD player, see VCR Connection. A DVD player is optional  
• If you have a satellite television system, refer to the satellite TV manual.  
No VCR Connection  
75Ω  
(VHF/UHF)  
Cable or Antenna  
Coaxial Cable  
Output  
(Attachment)  
Two-way Splitter  
(Attachment)  
C
S
AT  
DIGIT  
CABLE IN  
AL  
/
TV Rear Panel  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
VCR Connection  
Notes:  
• Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the user’s manual for your DVD player for more information.  
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
You may also connect the DVD player to Input 1.  
Diagram #1  
VCR  
Cable or Antenna  
Output  
IN  
IN  
OUT  
L
R
OUT  
Two-Way Splitter  
(Attachment)  
IN  
OUT OUT  
OR  
Coaxial Cable  
(Attachment)  
S-VIDEO  
75  
VIDEO  
(VHF/UHF)  
INPUT1  
R
-
AUDIO  
-
L
S-VIDEO  
VIDEO  
INPUT2  
R
-
AUDIO  
-
L
VIDEO  
C
S
AT  
CABLE IN  
AL  
DIGIT  
I
/
R
-
AUDIO  
-
L
Y
TV Rear Panel  
Pr  
R
Pb  
IU1CMPOENT  
-
AUDIO  
-
L
GTLNAUDIO  
Green  
Blue  
Y
PB  
DVD Player (OPTIONAL)  
Red  
PR  
AUDIO OUT  
ADIOUT  
OUT  
R
L
Note:  
• If this connection setup does not work for you, try the connection setup on page 17.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Diagram #2  
VCR  
Cable or Antenna  
Output  
IN  
IN  
OUT  
IN  
Two-Way Splitter  
OUT OUT  
L
R
OUT  
OR  
IN  
Two-Way Splitter  
(Attachment)  
OUT OUT  
Coaxial Cable  
(Attachment)  
S-VIDEO  
VIDEO  
INPUT1  
R
-
AUDIO  
75Ω  
-
L
(VHF/UHF)  
S-VIDEO  
VIDEO  
INPUT2  
R
-
AUDIO  
-
L
VIDEO  
INPUT3  
R
-
AUDIO  
-
L
C
S
AT  
DIGIT  
CABLE IN  
AL  
/
Y
Pr  
R
Pb  
IU1CMPOENT  
TV Rear Panel  
-
AUDIO  
-
L
GTLNAUDIO  
Green  
Blue  
Y
PB  
DVD Player (OPTIONAL)  
Red  
P
R
AUDIO OUT  
ADIOUT  
OUT  
R
L
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Camcorder  
You can connect a camcorder to you televison by using the input jacks located on the back of  
the television.  
TV Rear Panel  
S-VIDEO  
VIDEO  
CAMCORDER  
NUPT1  
I
OR  
R
-
AUDIO  
-
L
S-VIDEO  
VIDEO  
IPNUT2  
R
-
AUDIO  
-
L
IPNUT3  
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the back of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.  
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on  
the back of the TV.  
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on  
the back of the TV.  
Note:  
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the  
LEFT AUDIO IN on the back of the TV.  
Headphone Connection  
You can connect a pair of headphones to the television  
using the headphone jack located on the side of the  
television.  
1) Plug a headphone jack into the headphone jack on  
the television’s side panel.  
TV Side Panel  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an External Amplifier  
TV Rear Panel  
Speaker  
Speaker  
S-VIDEO  
VIDEO  
OVER  
Amplifier  
R
-
AUDIO  
-
L
MNI/RECOUT  
ADIOUT  
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the  
LEFT AUDIO INPUT on the amplifier.  
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the  
RIGHT AUDIO INPUT on the amplifier.  
Notes:  
• Refer to your amplifier’s manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
• DVI analog sound can not be outputted.  
Connecting to Monitor/Recording Output Terminal  
OR  
MNI/RECOUT  
ADIOUT  
VCR  
IN  
IN  
OUT  
OUT  
TV Rear Panel  
Notes:  
• When you make this connection, set the Video-1 Monitor Out menu to ON. See page 51.  
• If you are receiving ATSC/Digital Cable signal, it can be outputted to the S-Video output  
terminal or Video (composite video) terminal.  
• If you are receiving Analog TV signal, it can not be outputted to the S-Video output terminal.  
• No signal will be outputted through the S-Video output terminal when you are not viewing  
images coming from the composite video input terminal.  
• No signal will be outputted through the Monitor/Recording output terminal when you are  
viewing images from the component video input.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an AV Receiver using your television's  
V1 Smart Input  
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture  
sources from many different devices, without having to change or use the other input  
connections on your TV. This allows you to free up the other input connections so you can  
connect more devices to your television.  
TV Rear Panel  
S-VIDEO  
VIDEO  
OVER  
NPUT1  
I
R
-
AUDIO  
-
L
S-VIDEO  
VIDEO  
OVER  
NPUT2  
I
R
-
AUDIO  
-
L
VIDEO  
AV Receiver  
INPUT3  
R
-
AUDIO  
-
L
MONITOR  
OUT  
Y
Y
Pr  
R
Pb  
IU1CMPOENT  
-
AUDIO  
-
L
GTLNAUDIO  
MOOR OUT  
S-VIDEO  
VIDEO  
OVER  
R
-
AUDIO  
-
L
MNI/RECOUT  
ADIOUT  
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1  
on the back of your television.  
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO  
INPUT-1 on the back of your television.  
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y  
VIDEO INPUT-1 on the back of your television.  
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb  
VIDEO INPUT-1 on the back of your television.  
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr  
VIDEO INPUT-1 on the back of your television.  
Notes:  
• Please refer to your AV Receiver instruction manual for more information on connecting your  
speakers and other devices like a DVD player.  
• Use your AV Receiver's remote to switch to the different devices you have connected.  
• Some AV Receivers may not respond when the V1 Smart Input function is turned on.  
• If you have video connections for each input device connected to your AV Receiver, you  
should not connect them using both S-Video and Composite connection at the same time  
when you are using V1 Input as the V1 Smart Input. In this case we recommend using the  
S-Video connection.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a Digital TV Receiver  
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in  
their digital form.  
IPNUT2  
TV Rear Panel  
VIDEO  
DTV Decoder  
IPNUT3  
R
-
AUD  
IO  
-
L
Y
Pr  
R
DIGITAL OUT  
AUDIO OUT  
Pb  
IU1CMPOENT  
L
R
-
AUDIO  
-
L
GLTNAUDIO  
DIG
AIDOUT  
ARD  
C
CABLE  
HDMI to DVI Cable  
After the connections have been made,  
tighten the screw to secure the cables.  
TV Rear Panel  
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to  
the DIGITAL-IN on the back of your television.  
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO  
DIGITAL-IN on the back of your television.  
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO  
DIGITAL-IN on the back of your television.  
• The digital-in terminal is not compatible with the picture signal of a personal computer.  
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television  
with a DTV decoder.  
Notes:  
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance  
may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer  
to page 52.)  
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to  
ANALOG. See "DIGITAL-IN AUDIO", page 52.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to a HDMI Compatible Device  
By connecting a HDMI compatible device, high definition pictures can be displayed on your  
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI  
compatible device.  
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all  
digital audio/video interface. HDMI provides and interface between any audio/video source,  
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a  
digital television (DTV).  
HDMI Compatible Device  
DIGITAL OUT  
AUDIO OUT  
L
R
D
ARD  
C
CABLE  
HDMI Cable  
TV Rear Panel  
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to  
the DIGITAL-IN on the back of your television.  
Notes:  
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to  
DIGITAL. See "DIGITAL-IN AUDIO", page 52.  
• Some decoders may not respond depending on the equipment that you have connected  
when it is connected to the HDMI.  
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to  
480p/60Hz), the screen may turn green and there may be some distortion for a short time  
until the signal becomes stable.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting to an amplifier using your optical output  
You can connect an amplifier that has an optical digital input terminal by using an optical digital  
cable from the optical output. The signal that is output can be PCM or Dolby Digital.  
Television Rear Panel  
Amplifier  
1) Connect the optical cable from underneath the television to the back of the amplifier.  
Notes:  
• This terminal can only output digital audio.  
• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in  
the Digital Setup Menu. See page 71.  
• Refer to your owners manual on using your amplifier.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connections  
Connecting an i.LINK compatible device to the back of  
your television  
i.LINK is a digital serial interface that allows devices equipped with an i.LINK connector to  
exchange digital video signals, digital audio signals and device control signals bi-directionally  
over a single cable. (For example, a JVC D-VHS VCR).  
i.LINK refers to the IEEE1394-1995 industry specification and extensions thereof. The  
is used for products compliant with the i.LINK standard.  
logo  
This projection television uses a four-pin i.LINK connector to input and output MPEG2 video  
signals, audio signals and control signals.  
TV Rear Panel  
i.LINK Compatible Device  
1) Connect the i.LINK cable from underneath the TV to the back of the i.LINK compatible  
device.  
Notes:  
• Use only the S400 i.LINK cable when connection your devices.  
• See page 74 on how to select the i.LINK device.  
• Refer to your owners manual on using your i.LINK device.  
• When recording or playing back video with an i.LINK device, if you perform the Auto Tuner  
Setup, the video signal you are recording or playing back may stop or you may not be able  
to perform the Digital Auto Tuner Setup.  
Your television can connect with i.LINK D-VHS decks and HD-Camcorders (JVC brand only).  
If you connect other brand devices, with i.LINK cable, they will not work.  
• It can play only the recorded contents in Digital Mode.  
• Use only tapes bearing the DVHS (SVHS) mark for recording.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Step 4 – The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear. The  
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:  
• The language in which you want the onscreen menus to appear.  
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can  
choose “AUTO” or “MANUAL” for setting the clock.  
• The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Notes:  
• The interactive plug-in menu setting does not appear if your TV has been turned on before.  
In this case use the onscreen menus to perform these settings. See pages 45, 57, 35.  
• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.  
Language  
After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically  
switches to the LANGUAGE settings. You can choose to view your onscreen menus in three  
languages: English, French (Français) or Spanish (Español).  
LANGUAGE/LANGUE/IDIOMA  
®  
To choose a language:  
(English, Français or Español)  
To NEXT (To set clock)  
ENGLISH  
NEXT  
MENU  
SELECT OPERATE  
EXIT  
(To be continued...)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Clock Set  
Before you use any of your TV’s timer functions, you must first set the clock. You may  
precisely set your clock using the XDS time signal broadcast by most public analog  
broadcasting stations. If you do not have this in your area, you will have to set the clock  
manually. See manual clock set below. To set the clock using the XDS signal:  
®  
To choose AUTO  
To TIME ZONE  
SET CLOCK  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
MODE  
AUTO  
--: ----  
TIME  
TIME ZONE  
DATE/YEAR  
D.S.T.  
ATLANTIC  
JAN/01/05  
ON  
®  
To move to D.S.T. (Daylight Savings Time)  
To turn D.S.T. ON or OFF  
To NEXT (To Auto Tuner Setup)  
NEXT  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.  
• Only when the MODE is set to AUTO, the Daylight Savings Time feature automatically  
adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00  
am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last  
Sunday in October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
Manual Clock Set  
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose  
AUTO, see auto clock set above.  
®  
To choose MANUAL  
To TIME  
SET CLOCK  
®  
To set the hour  
To minute  
MODE  
MANUAL  
®  
To set the minute  
To TIME ZONE  
TIME  
--: ----  
TIME ZONE  
DATE/YEAR  
D.S.T.  
ATLANTIC  
JAN/01/05  
ON  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
START CLOCK  
SELECT OPERATE  
®  
To DATE/YEAR  
To set the month  
To day  
MENU  
EXIT  
®  
To set the day  
To year  
®  
®  
To set the year  
To move to D.S.T. (Daylight Savings Time)  
To turn D.S.T. ON or OFF  
To START CLOCK  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
(To be continued...)  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Plug-In Menu  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when you  
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels. There are  
two tuner modes to choose from, ANALOG or DIGITAL.  
®  
To choose CABLE or AIR (or SKIP when  
you skip Analog Auto Tuner Setup)  
AUTO TUNER SETUP  
IN ANALOG  
TUNER MODE  
IN DIGITAL  
AIR  
π†  
To TUNER MODE (IN DIGITAL)  
ATSC  
TUNER MODE  
®  
To choose ATSC or Digital Cable (or SKIP  
when you skip Digital Auto Tuner Setup)  
To START  
START  
SELECT OPERATE  
After Analog Auto Tuner Setup is finished, Digital Auto  
Tuner Setup starts.  
MENU  
EXIT  
NOW  
PROGRAMMING !  
Now Programming...  
20  
48  
When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your  
quick setup is now complete. You can now begin watching your television, or you can continue  
on in this guide for more information on programming your remote control, or using the  
JVC onscreen menu system to customize your television viewing experience.  
Notes:  
• If you want to cancel the Auto Tuner Setup, press the MENU button.  
• Noise muting will not work during Auto Tuner Setup.  
• If you choose SKIP, it finished without doing the Auto Tuner Setup.  
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending  
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is  
normal.  
The Quick Setup is complete  
STOP  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Setting the CATV, VCR and DVD Codes  
You can program your remote to operate your cable box, satellite receiver, VCR or DVD  
player by using the instructions and codes listed below. If the equipment does not respond  
to any of the codes listed below or to the code search function, use the remote control  
supplied by the manufacturer.  
Cable Box or Satellite Codes  
The remote control is programmed with cable box and satellite codes for power on/off,  
channel up/down, and 10 key operation.  
1) Find the cable box or satellite brand from the list of codes shown below.  
2) Slide the 2-way selector switch to “CATV”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.  
• If your cable or satellite box does not respond to the first code, try the others listed. If it does  
not respond to any code, try the search codes function, on page 31.  
Cable Box  
Codes  
024  
Digital  
Satellite  
Systems  
Codes  
Cable Box  
Codes  
ABC  
Puser  
RCA  
032  
Archer  
032, 025  
051, 032  
022, 051  
058, 059  
024, 032, 025  
029  
061, 070  
032  
Echostar  
(Dish Network) 115  
100, 113, 114,  
Cableview  
Citizen  
Curtis  
Realistic  
Regal  
058, 064, 040,  
041, 042, 045,  
068  
Express VU  
G.E.  
100, 113  
106  
Diamond  
Eagle  
Regency  
034  
G.I.  
108, 120, 121,  
122  
Rembrandt  
037, 032, 051,  
038  
Eastern  
GC Brand  
Gemini  
General  
034  
032, 051  
022, 043  
065, 024, 025,  
Gradiente  
Hitachi  
112  
Samsung  
051  
104, 111  
Scientific Atlanta 057, 058, 059  
SLMark  
051, 047  
051, 056  
032, 051  
HNS (Hughes)  
104  
Instrument/Jerrold 026, 027, 020,  
021, 022, 057,  
023, 072, 074  
Sprucer  
Stargate  
Magnavox  
102, 103  
Panasonic  
Philips  
105  
Hamlin  
040, 041, 042,  
045, 058, 064  
049, 024  
Telecaption  
Teleview  
Texscan  
Tocom  
067  
102, 103, 116  
Hitachi  
Macom  
047, 051  
044  
Primestar  
108  
049, 050, 051,  
054  
Proscan  
RCA  
106, 109, 110  
106, 109, 110  
035, 036, 066,  
074  
Magnavox  
033  
Sony  
107  
030  
Memorex  
Movietime  
Toshiba  
Unika  
050, 048  
032, 025  
Star Choice  
Toshiba  
104, 108  
032, 051  
039, 037, 048  
101, 104, 117,  
118, 119  
Oak  
Universal  
Videoway  
Viewstar  
Zenith  
022, 032  
052  
Panasonic  
055, 056, 060,  
071, 073  
Uniden  
102, 103  
Paragon  
Philips  
063  
029, 030  
063, 046  
046  
028, 029, 030,  
052, 053, 031,  
069  
Zenith/Drake  
Satellite  
Pioneer  
Pulsar  
047, 062  
051, 032  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
VCR Codes  
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,  
rewind, pause, record, channel up/down operation.  
1) Find the VCR brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the VCR.  
• If your VCR does not respond to the first code, try the others listed. If it does not respond to  
any of the codes, try the search codes function on page 31.  
• After you program your remote, some VCR buttons may not work properly. If so, use the  
VCR’s remote.  
To record, hold down the REC button on the remote and press PLAY.  
Codes  
035  
027, 032, 095  
Codes  
Codes  
VCR  
Admiral  
VCR  
VCR  
Marantz  
Marta  
003, 004, 005  
064  
Samsung  
037, 060, 062,  
033, 089  
Aiwa  
Akai  
Samtron  
Sansui  
089  
029, 072, 073, Memorex  
074  
024, 067  
003, 026, 020,  
052  
038, 040, 047,  
048, 041, 042  
MGA  
Audio Dynamic 003, 005  
Sanyo  
Scott  
063, 067, 091,  
071  
Bell & Howell  
Broksonic  
Canon  
063, 071  
020, 026, 094  
023, 025  
043  
Minolta  
058, 045, 093  
Mitsubishi  
038, 040, 047,  
048, 041, 042,  
078, 090  
059, 060, 062,  
067, 038, 040,  
047, 048, 026,  
020  
CCE  
Multitech  
NEC  
047, 027, 062  
Citizen  
064  
003, 004, 005,  
000  
Sears  
063, 064, 065,  
066, 058  
Craig  
063, 029, 064  
Curtis Mathes  
045, 024, 027,  
093  
Olympic  
024, 023  
Sharp  
035, 036, 080,  
088  
Optimus  
028, 021, 035,  
064  
Daewoo  
043, 059, 024,  
092  
Shintom  
075  
026, 020  
Orion  
DBX  
003, 004, 005  
Signature 2000 027, 035  
Panasonic  
023, 024, 021,  
022  
Dimensia  
Emerson  
045, 093  
Singer  
Sony  
075  
043, 026, 077,  
061, 025, 042,  
020, 076  
Penney  
024, 058, 045,  
063, 003, 004,  
005, 093  
028, 029, 030,  
053, 054, 055  
SV 2000  
Sylvania  
027  
Fisher  
Funai  
063, 066, 067,  
065, 071, 091  
Pentax  
Philco  
058, 005, 045,  
093  
031, 023, 024,  
027  
027, 026, 020,  
000  
031, 024, 027,  
023, 026, 020,  
043  
Symphonic  
Tashiro  
Tatung  
027, 081  
064  
033, 045, 024  
G.E.  
003, 004, 005  
Philips  
031, 023, 024,  
086  
Go Video  
037, 051, 049,  
050, 089  
Teac  
003, 004, 027,  
005  
Pioneer  
Proscan  
023  
Goldstar  
064  
Technics  
Teknika  
021, 022, 023,  
024  
045, 058, 023,  
024, 031, 046,  
059, 060, 093,  
033, 087  
Gradiente  
083, 084, 081,  
000, 001  
024, 027, 070  
Hitachi  
023, 045, 058,  
093, 027, 081  
Thomson  
Toshiba  
033, 096  
Quasar  
021, 022, 023,  
024  
Instant Replay 024, 023  
059, 046, 079  
Radio Shack  
033, 024, 063,  
036, 067, 040,  
027  
Jensen  
JVC  
003  
Vector Research 005  
003, 004, 005,  
000, 001, 002,  
006, 007  
Wards  
Yamaha  
Zenith  
035, 036, 067,  
044, 064  
033, 045, 058,  
023, 024, 031,  
046, 059, 060,  
083, 084, 085,  
087, 093, 096  
RCA  
063, 003, 004,  
005  
Kenwood  
003, 004, 064,  
005  
044, 082, 064,  
094  
LG  
064  
Realistic  
024, 063, 036,  
067, 040, 027  
LXI  
027, 064, 058,  
065, 066, 063,  
067  
Magnavox  
031, 023, 024,  
086  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
DVD Codes  
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,  
rewind, previous/next chapter, tray open/close, and still/pause operation.  
1) Find the DVD player brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the DVD player.  
• If your DVD player does not respond to the first code, try the others listed. If it does not  
respond to any of the codes, try the search codes function on page 31.  
• After you program your remote, some DVD buttons may not work properly. If so, use the  
DVD player’s remote.  
DVD Player  
Aiwa  
Codes  
DVD Player  
Mintek  
Codes  
057  
DVD Player  
Sharp  
Codes  
028  
043  
Apex  
040, 054,  
055  
Mitsubishi  
025  
Silvania  
038  
Bose  
058  
Next Base  
Onkyo  
056  
SMC  
Sony  
048  
024, 045,  
046, 047  
Denon  
020, 037  
041, 052  
Funai  
038  
032  
053  
Oritron  
044  
Technics  
Thomson  
Toshiba  
020  
021  
023  
Go–Video  
Panasonic  
Philips  
020  
Harman  
Kardon  
023, 036  
Hitachi  
JVC  
031  
Pioneer  
Polk Audio  
Raite  
022  
036  
033  
Venturer  
Vialta  
051  
050  
000  
Kenwood  
035, 020  
Wave  
042  
Yamaha  
Zenith  
020, 049  
027, 032  
KLH  
051  
039  
050  
RCA  
021, 026  
034  
Konka  
Koss  
Sampo  
Samsung  
030  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Programming  
Search Codes  
Cable/Satellite Search Codes Function  
1) Slide the first 2-Way Mode Selector switch to CATV.  
2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.  
3) Press the POWER button on the remote, and see if the cable or satellite box responds.  
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use  
the remote control that came with your equipment.  
5) Press RETURN+/TV to exit.  
VCR/DVD Search Codes Function  
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or  
“DVD”.  
2) Press the VCR or DVD POWER and RETURN+/TV buttons. Hold for at least three seconds  
and release.  
3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.  
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for  
the DVD player), and there is no response, use the remote control that came with your  
equipment.  
5) Press RETURN+/TV to exit.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
πUp and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–  
buttons let you:  
• Move vertically in a main menu screen  
• Move through a submenu screen  
• Move to the next letter, number, or other choice in a submenu  
• Back up to correct an error  
• Scan through TV channels (when not in a menu screen)  
® Left and right arrows mean press the VOLUME+ or VOLUME- buttons to move left or right  
to:  
• Select a highlighted menu item  
• Select an item in a submenu  
• Select numbers in certain menu options  
• Turn the volume up or down (when not in a menu screen)  
The “press button” icon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The “helping arrow” icon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The item that  
appears in green is the one currently selected. If you use the Menu button on the TV’s side  
panel instead of the remote, an additional menu screen showing VIDEO STATUS and ASPECT  
will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in menu” will  
appear the first time the TV is plugged in.  
INITIAL SETUP  
PREVIOUS  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
SET LOCK CODE  
OFF  
AUTO DEMO  
NEXT PAGE  
(4/5)  
MENU  
SELECT OPERATE  
EXIT  
Note:  
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen  
displays.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make  
adjustments to your television’s operation simply and quickly. Examples of the onscreen  
menus are shown on the next page. Detailed explanations on using each menu follow later in  
this guide. For information about the interactive plug-in Menu, see pages 25 - 27.  
The Onscreen Menu System  
To open the onscreen menu system, press the MENU button on the remote control. You  
navigate within the onscreen menus by using the four directional arrow buttons on the remote  
control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions  
will not operate when the onscreen menu is active).  
The selected feature and option on a menu screen are highlighted in a different color.  
Selected Option  
(Green)  
ENG. FRAN. ESP.  
LANGUAGE  
Selected Option  
(Blue)  
CLOSED CAPTION  
To move to a different feature use the πarrows to move up or down the list. When you  
press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen  
will appear. Use the arrows ® to select an option from the highlighted feature. Pressing  
MENU on the remote control will close the onscreen menu system and return you to normal  
television viewing.  
Each menu and its features will be discussed in the following pages of this guide.  
Notes:  
• If you do not press any buttons for a few seconds, the onscreen menu will automatically  
shut off.  
• Button names in this guide are shown in SMALL CAPITAL LETTERS.  
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.  
• Some menu items may not appear in menu screens when certain aspect ratios or inputs  
are selected.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Press the MENU button  
TO INITIAL SETUP 03  
INITIAL SETUP  
/
INITIAL SETUP  
CLOCK TIMERS  
PREVIOUS  
SET CLOCK  
PREVIOUS  
PREVIOUS  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
OFF  
SIZE1  
VIDEO-1 MONITOR OUT  
DIGITAL-IN  
/
ON OFF TIMER  
DIGITAL  
DIGITAL-IN AUDIO  
SET LOCK CODE  
AUTO DEMO  
OFF  
NEXT PAGE  
(4/5)  
NEXT PAGE  
NEXT PAGE  
(1/5)  
MENU  
MENU  
MENU  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
CLOCK/TIMERS  
INITIAL SETUP 01  
INITIAL SETUP 04  
INITIAL SETUP  
INITIAL SETUP  
SOUND ADJUST  
PREVIOUS  
PREVIOUS  
PREVIOUS  
DIGITAL SETUP  
NOISE MUTING  
ON  
OFF  
ON  
BASS  
00  
00  
00  
MEDIA CARD VIEWER  
FRONT PANEL LOCK  
V1 SMART INPUT  
TREBLE  
BALANCE  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
LOW  
(2/5)  
RESET  
NEXT PAGE  
(5/5)  
NEXT PAGE  
NEXT PAGE  
MENU  
SELECT OPERATE  
EXIT  
MENU  
MENU  
SELECT OPERATE  
EXIT  
SELECT OPERATE  
EXIT  
INITIAL SETUP 05  
SOUND ADJUST  
INITIAL SETUP 02  
INITIAL SETUP  
PICTURE ADJUST  
PICTURE ADJUST  
PREVIOUS  
PREVIOUS  
STANDARD  
PREVIOUS  
STANDARD  
ILLUMINATION  
LANGUAGE  
LOW  
COLOR TEMPERATURE  
DIG. NOISE CLEAR  
COLOR MANAGEMENT  
DYNAMIC GAMMA  
SMART PICTURE  
RESET  
HIGH  
OFF  
OFF  
OFF  
ON  
TINT  
00  
00  
00  
00  
00  
ENG. FRAN. ESP.  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
ENERGY SAVER MODE  
NEXT PAGE  
(1/2)  
EXIT  
NEXT PAGE  
(2/2)  
NEXT PAGE  
(3/5)  
MENU  
MENU  
SELECT OPERATE  
SELECT OPERATE  
EXIT  
MENU  
SELECT OPERATE  
EXIT  
PICTURE ADJUST 02  
INITIAL SETUP 03  
PICTURE ADJUST 01  
TO INITIAL SETUP 04  
Notes:  
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the  
digital-in terminal and the picture is being displayed on the screen.  
• When the Menu button on the TV side panel is pressed, the FRONT PANEL CONTROL menu  
between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear.  
• Regarding the digital setup menu, see page 70.  
• MEDIA CARD VIEWER is for LT-40X776 ONLY.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Tuner Setup  
The auto tuner setup function is described on page 27 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
Press the MENU button  
AUTO TUNER SETUP  
IN ANALOG  
π†  
®  
π†  
®  
π†  
®  
To AUTO TUNER SETUP  
TUNER MODE  
IN DIGITAL  
AIR  
To operate  
ATSC  
TUNER MODE  
To TUNER MODE (IN ANALOG)  
To choose CABLE, AIR or SKIP  
To TUNER MODE (IN DIGITAL)  
To choose ATSC, DIGITAL CABLE or SKIP  
PRESS OK TO START  
SELECT OPERATE  
MENU  
EXIT  
Press the OK button to start  
Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the  
message PROGRAMMING OVER! appears onscreen.  
Press the Menu button when finished  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV.  
Regarding analog channels, you can add or delete channels from the line-up or prevent any  
unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the  
only channels that will appear are the ones that are broadcasting.  
Press the MENU button  
To CHANNEL SUMMARY  
To operate  
Analog Channels  
CHANNEL SUMMARY  
π†  
CHNO. SCAN  
ID  
CHNO. SCAN  
ID  
®  
01  
06  
HBO  
The Channel summary screen will now be displayed with  
the channels set to scan marked with an “”. Regarding  
analog channels, you can delete channels from the scan  
by removing the “”. If any channels were missed during  
auto tuner setup and you wish to add them, you may by  
placing an “” next to the channel number.  
02  
03  
04  
05  
MTV  
07  
08  
09  
10  
L
A&E  
E!  
OK  
MENU  
SELECT  
OPERATE  
EXIT  
Digital Channels  
• Digital channels can not be added to the channel  
summary if the auto tuner setup did not find them.  
Channel Summary Digital  
CH No.  
D01  
Scan  
Station Name  
FOX  
π® To the SCAN column  
Press the OK button to include or delete from  
scan  
D02  
ABC  
D02  
CNN  
D10-1  
D10-2  
D12345  
NBC  
BOX  
Press the MENU button when finished  
NHK  
BACK  
MENU  
Operate  
Back  
Exit  
Note:  
Note:  
• The number of a digital channel may change,  
depending on the time of some broadcastings. If  
this channel existed and now had disappeared, the  
lock channel or scanned channel by the channel  
summary for that channel will be cancelled.  
• When the Cable Card is not  
inserted into the Cable Card  
Slot:  
If you are watching analog  
channels, the above screen  
appears.  
If you are watching digital  
channels, the below screen  
appears.  
• When the Cable Card is  
inserted into the Cable Card  
Slot:  
Below screen appears  
Both analog and digital  
channels are listed, but the  
background video is not  
displayed.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
How to set the channel label. (This is only for analog broadcasting.)  
Press the MENU button  
ID  
π†  
®  
π†  
To CHANNEL SUMMARY  
To operate  
To the ID column  
CHANNEL 09  
RESET  
Press the OK button to enter  
OK  
PRESS TO FINISH  
®  
π†  
To select the character you want  
To move to the next space  
MENU  
SELECT OPERATE  
EXIT  
...continue to follow these directions for all four  
spaces  
Press the OK button to finish  
Your characters are now set  
Press the MENU button when finished  
If you want to reset the characters you set:  
Press the MENU button  
π†  
®  
π†  
To CHANNEL SUMMARY  
To operate  
To the ID column  
Press the OK button to enter  
To select RESET  
π†  
Press the OK button to finish  
Your characters are now reset  
Notes:  
You can use characters for: Alphabet, numbers, marks and spaces.  
• It is possible to set the maximum of 40 channel labels.  
• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will  
appear.  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
π†  
To CHANNEL SUMMARY  
To operate  
®  
π® To the Lock Column (  
)
Press the ZERO button to lock or unlock that channel  
Press the MENU button when finished  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the  
THIS CHANNEL IS LOCKED BY  
CHANNEL GUARD.  
Lock Code using the 10 key pad.  
If the wrong code is entered, the message  
“INVALID LOCK CODE!” will flash on the screen.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
The channel cannot be accessed until the correct code  
is entered.  
NO. - - - -  
Notes:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
• See also “Set Lock Code”, page 44.  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set  
up V-CHIP ratings limits, these programs will not be blocked. See page 39 for information on  
how to block unrated programs.  
Note (for Canadian viewers): The V-Chip function is based on specifications designed for  
the United States and therefore may not work properly in Canada.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings  
You can use US V-Chip settings (for programming broadcast from the United States), Canadian  
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use  
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting  
each of the three V-Chip formats appear in the next six pages along with descriptions of the  
rating categories.  
To access the rating categories:  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
To operate (Lock icon  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
will appear)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
To turn V-Chip ON or OFF (V-Chip must be  
turned ON for rating settings to operate)  
π†  
To move to SET US TV RATINGS,  
SET MOVIE RATINGS, or  
MENU  
SELECT OPERATE  
EXIT  
SET CANADIAN RATINGS (see following  
pages for descriptions of each item)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to BLOCK.  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
Press the MENU button  
V-CHIP  
OFF  
V-CHIP  
π†  
To V-CHIP  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
®  
To operate (The lock icon  
appears)  
Press ZERO to access V-Chip setup options  
VIEW  
π†  
To UNRATED  
®  
To VIEW or BLOCK  
MENU  
SELECT OPERATE  
EXIT  
Press MENU when done  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be able  
to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or no  
violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of content  
are also supplied with the V-Chip rating. These types of content may also be blocked. The  
content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Setting US V-Chip Ratings  
Press the MENU button  
V-CHIP  
V-CHIP  
OFF  
π†  
®  
To V-CHIP  
To operate (lock icon  
SET US TV RATINGS  
SET MOVIE RATINGS  
SET CANADIAN RATINGS ENG  
SET CANADIAN RATINGS FRE  
UNRATED  
appears)  
Press ZERO to access the V-Chip menu  
VIEW  
®  
π†  
®  
To turn V-Chip ON or OFF  
To move to SET US TV RATINGS  
To operate  
MENU  
SELECT OPERATE  
EXIT  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the πor ® to move the cursor to the correct location. Press OK to turn the locking  
feature on or off. An item is locked if the  
icon appears instead of a “—”.  
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column  
is automatically locked.  
SET US TV RATINGS  
π® To the TV 14 Column  
TV TV  
MA 14  
TV  
PG  
TV  
G
TV  
Y7  
TV  
Y
Press the OK button to lock  
Press the MENU button when finished  
V/FV  
S
L
Note:  
D
• If you want to change the setup, move the cursor to  
the top column and change the lock icon to “—” by  
pressing OK again. You may then select individual  
categories to block.  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Movies Ratings  
NR – Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur producers  
who didn’t intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including children’s  
programming, foreign programs, or adult material.  
G – General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG – Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 – Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating may  
include more explicit sexual, language, and violence content than movies rated PG.  
R – Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 – No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X – No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (Lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET MOVIE RATINGS  
To enter movies menu  
For example:  
To block viewing of X and NC-17 rated from shows:  
SET MOVIE RATINGS  
π® To the X Column  
Press the OK button to lock  
π® To the NC-17 Column  
Press the OK button to lock  
Press the MENU button to finish  
N
P
G13  
X
C17  
R
PG  
G
NR  
OK  
MENU  
EXIT  
SELECT  
OPERATE  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Canadian V-Chip Ratings  
E – Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C – Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ – Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G – General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG – Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ – 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and  
early teens. Programming may contain mature themes and scenes of intense violence.  
18+ – Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
π†  
®  
To V-CHIP  
To operate (lock icon  
appears)  
Press ZERO to access V-Chip setup options  
π†  
®  
To SET CANADIAN RATINGS ENG (for English)  
To enter ratings menu  
For example:  
To block viewing of programming rated 14+ and 18+:  
SET CANADIAN RATINGS ENG  
®  
To the 18+ Column  
Press the OK button to lock  
P
C
8
G
C
18+  
14+  
G
®  
To the 14+ Column  
Press the OK button to lock  
Press the MENU button to finish  
MENU  
OK  
EXIT  
SELECT  
OPERATE  
Note:  
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 43 in the  
French side of this user’s guide.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes  
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.  
To change the lock code, follow the steps below.  
Press the MENU button  
SET LOCK CODE  
π†  
To SET LOCK CODE  
To operate (lock icon  
LOCK CODE  
0000  
®  
appears)  
Press ZERO to access the lock code  
The first digit will be highlighted  
OK  
PRESS  
TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
®  
π†  
To select the number  
To move to the next digit  
Continue to follow these directions for all four numbers  
Press the OK button to finish (your lock code is now set)  
Press the Menu button when finished  
When a viewer attempts to watch a blocked channel, this message appears:  
THIS PROGRAMMING EXCEEDS  
YOUR RATING LIMITS.  
PLEASE ENTER LOCK CODE BY  
10 KEY PAD TO UNLOCK IT.  
NO. - - - -  
The channel will remain blocked until the correct lock code is entered (see above for  
information on setting your lock code).  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Demo  
This function lets you preview the Dynamic Gamma demo.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
AUTO TUNER SETUP  
CHANNEL SUMMARY  
V-CHIP  
π†  
®  
To AUTO DEMO  
To turn AUTO DEMO ON or OFF  
SET LOCK CODE  
Notes:  
OFF  
AUTO DEMO  
• Auto demo starts 2 seconds after it is set to ON.  
• To stop auto demo, press the BACK button.  
NEXT PAGE  
(4/5)  
MENU  
SELECT OPERATE  
EXIT  
Illumination  
The illumination feature allows you to adjust the brightness of the light on the front of the  
television. When you turn the power on the televison, the front panel light remains on when  
illumination is set to LOW or HIGH.  
Press the Menu button  
INITIAL SETUP  
PREVIOUS  
π†  
To ILLUMINATION  
ILLUMINATION  
LANGUAGE  
LOW  
®  
To choose HIGH, LOW or OFF  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
Press the MENU button when finished  
OFF  
ON  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
Language  
The language function is described on page 25 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
Press the Menu button  
INITIAL SETUP  
PREVIOUS  
π†  
To LANGUAGE  
ILLUMINATION  
LANGUAGE  
LOW  
®  
To choose a language: ENG. (English), FRAN.  
(French) or ESP. (Spanish)  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television can  
access and display this information using the closed caption feature. To activate the closed  
caption feature, follow the steps below. There are three methods. When you are watching  
analog channels, you can perform Analog Setting of closed caption. When you are watching  
digital channels, you can perform Digital Auto Setting or Digital Manual Setting.  
Analog Setting  
Press the MENU button  
CLOSED CAPTION  
π†  
®  
π†  
®  
π†  
®  
To CLOSED CAPTION  
To enter  
To MODE  
To select CAPTION or TEXT in MODE  
To CAPTION or TEXT  
To select a caption (CC1 to CC4) or text  
channel (T1 to T4)  
MODE  
TEXT  
CC1  
T1  
CAPTION  
TEXT  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
Press the OK button to save  
Press the MENU button when finished  
Digital Auto Setting  
Press the MENU button  
Digital Closed Caption  
Preview  
π†  
®  
π†  
®  
To CLOSED CAPTION  
To enter  
To Type  
Closed Caption Sample  
Type  
AUTO  
1
Service  
Appearance  
To select Auto, Advanced or Basic  
Auto: Shows closed caption a priority for  
digital channels over analog channels. It is  
set automatically.  
Cancel  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Advanced: Shows only the digital closed  
caption.  
Basic: Shows only the analog closed  
caption.  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Appearance Mode  
Auto  
π†  
®  
π†  
®  
®  
π†  
To Service  
Font  
To select 1, 2, 3, 4, 5 or 6  
To Appearance  
To enter  
To select Auto  
To Set  
Colors  
Opacities  
Cancel  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the OK button to save  
The font/type and color are set automatically.  
Press the MENU button when finished  
Note:  
• If you want to cancel the settings, select cancel.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Digital Manual Setting  
Press the MENU button  
Digital Closed Caption  
Preview  
>
Appearance  
π†  
To CLOSED CAPTION  
Closed Caption Sample  
®  
π†  
®  
π†  
®  
π†  
®  
®  
π†  
®  
π†  
®  
To enter  
To Type  
Appearance Mode  
Manual  
Font  
Colors  
Opacities  
To select Auto, Advanced or Basic  
To Service  
To select 1, 2, 3, 4, 5 or 6  
To Appearance  
To enter  
To select Manual  
To Font  
To enter  
To select Font Size or Font Style  
To select the setting you like  
Cancel  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Font Size  
Standard  
Auto  
Appearance Mo
Font  
Font Style  
Colors  
Font Size: Auto, Standard, Large or Small  
Cancel  
Set  
Opacities  
Cancel  
Font Style: Auto, Serif Mono, Serif, Sanserif mono,  
Sanserif, Casual, Cursive or Small Capital  
π†  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
To Set  
Press the OK button to save  
π†  
®  
π†  
®  
To Colors  
To enter  
To select Text, Edge or Background  
To select the setting you like  
Digital Closed Caption  
Preview  
>
Appearance  
Closed Caption Sample  
Text  
Appearance Mo
White  
White  
Black  
Edge  
Auto, White, Black, Red, Green, Blue,  
Yellow, Magenta or Cyan  
Font  
Background  
Cancel  
Colors  
Opacities  
Set  
π†  
To Set  
Cancel  
Set  
BACK  
MENU  
Press the OK button to save  
Select  
Operate  
Back  
Exit  
π†  
®  
π†  
®  
To Opacities  
To enter  
To select Text/Edge or Background  
To select Auto, Transparent, Translucent,  
Solid or Flashing  
All fonts used for digital closed  
caption and digital menus are  
licensed from Monotype Imaging  
Inc.  
π†  
To Set  
Press the OK button to save  
Press the MENU button when finished  
Notes:  
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs  
may include additional text information which is usually found on text channel T1. The other  
channels are available for future use.  
• Closed captioning may not work correctly if the signal being received is weak or if you are  
playing a video tape.  
• Most broadcasts containing closed captioning will display a notice at the start of the program.  
To select the mode, press the C.C. button. See page 65.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the  
TV is on.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
ILLUMINATION  
LANGUAGE  
LOW  
π†  
®  
To AUTO SHUT OFF  
To turn ON or OFF  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
OFF  
ON  
Press the MENU button when finished  
• If the channel that you have on does not receive a  
signal for more than one minute, the blinking text  
“NOT RECEIVING A SIGNAL” appears on the screen,  
and starts the countdown. If no signal is being  
received within 10 minutes, the TV shuts itself off.  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
• When i.LINK is displayed, Auto Shut Off will not work.  
XDS ID  
XDS ID Display provides a channel’s call letters, the network’s name, and even a program  
name. The XDS ID information is provided by the broadcaster.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To XDS ID  
To turn ON or OFF  
ILLUMINATION  
LANGUAGE  
LOW  
ENG. FRAN. ESP.  
CLOSED CAPTION  
AUTO SHUT OFF  
XDS ID  
Press the MENU button when finished  
OFF  
ON  
NEXT PAGE  
(3/5)  
MENU  
SELECT OPERATE  
EXIT  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Noise Muting  
This feature inserts a blank grey screen over channels which are not broadcasting or are too  
weak to be received clearly.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To NOISE MUTING  
To turn noise muting ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
Press the MENU button when finished  
LOW  
NEXT PAGE  
(2/5)  
Note:  
MENU  
SELECT OPERATE  
EXIT  
• Noise muting will not work during auto tuner setup or  
when you operate channel summary.  
• Noise muting will not work when the digital TV or i.LINK is displayed.  
Front Panel Lock  
This allows you to lock the keys on the side of the TV, so that a child may not accidentally  
change your viewing preferences.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To FRONT PANEL LOCK  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
You can turn off this feature in the following ways:  
LOW  
(2/5)  
NEXT PAGE  
• Unplug the power cord, and plug it back in. Do this if  
your batteries die, or you lose your remote control.  
MENU  
SELECT OPERATE  
EXIT  
• Use the remote control.  
• Press the MENU button on the side of the TV for more than 3 seconds. In this case, the OSD  
for FRONT PANEL LOCK will appear.  
Note:  
To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will  
remain ON.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
V1 Smart Input  
This feature is used if you have connected an AV Receiver to your television. By turning this  
feature on, your television can automatically detect the signal source from your components  
that are connected to your AV Receiver.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
To V1 SMART INPUT  
To turn ON or OFF  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button when finished  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
LOW  
Notes:  
NEXT PAGE  
(2/5)  
• If you do not have an AV Receiver connected to your  
television, turn this feature OFF.  
MENU  
SELECT OPERATE  
EXIT  
• Some AV Receivers may not work with this function.  
Video Input Label  
This function is used to label video input connections for the onscreen displays.  
Press the MENU button  
INITIAL SETUP  
PREVIOUS  
π†  
®  
π†  
®  
To VIDEO INPUT LABEL  
To operate  
NOISE MUTING  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
OFF  
ON  
To select the desired video input  
LOW  
To select the desired preset input label (see  
chart below)  
NEXT PAGE  
(2/5)  
MENU  
SELECT OPERATE  
EXIT  
Press the OK button to save  
VIDEO INPUT LABEL  
Press the MENU button when finished  
VCR  
VIDEO-1  
VIDEO-2  
VIDEO-3  
DIGITAL-IN  
DVD  
SAT  
STB  
Preset  
Labels  
Select when...  
OK  
PRESS TO FINISH  
You have a VCR connected to the video input  
VCR  
MENU  
SELECT OPERATE  
EXIT  
You have a DVD connected to the video input  
DVD  
You have a Digital VCR connected to the video input  
You have a Set-top Box connected to the video input  
You have a Satellite Receiver connected to the video input  
You have an Amplifier connected to the video input  
You have a Video Game connected to the video input  
You have a Video Camera connected to the video input  
You have a Video Disc player connected to the video input  
DVHS  
STB  
SAT  
AMP  
GAME  
CAM  
DISC  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture on the screen vertically  
when the aspect is set to panorama, cinema, or full.  
Press the MENU button  
π†  
®  
To POSITION ADJUSTMENT  
To enter  
π® To adjust the position  
Press the MENU button to finish  
Notes:  
OK  
MENU  
RESET  
EXIT  
OPERATE  
To reset the adjustment to the center, press the  
OK button.  
• When the arrow disappears, while you are adjusting the position, the position is at it’s  
maximum limit.  
• If you select regular size and slim size with aspect or Multi Screen, position adjustment  
option is not seen.  
• When you change the screen size, perform the position adjustment again.  
• Position adjustment allows you to adjust the screen position vertically and horizontally when  
the aspect is set PANORAMA ZOOM or CINEMA ZOOM for 1080i and 720p signals.  
Power Indicator  
Power indicator allows you to adjust the brightness of  
INITIAL SETUP  
the power indicator  
PREVIOUS  
NOISE MUTING  
ON  
OFF  
ON  
FRONT PANEL LOCK  
V1 SMART INPUT  
Press the MENU button  
VIDEO INPUT LABEL  
POSITION ADJUSTMENT  
POWER INDICATOR  
πTo POWER INDICATOR  
®  
To adjust POWER INDICATOR LOW, HIGH  
or OFF  
LOW  
NEXT PAGE  
(2/5)  
MENU  
SELECT OPERATE  
EXIT  
Note:  
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.  
Video-1 Monitor Out  
This function allows you to set whether the signal, which comes from VIDEO-1 input terminal,  
should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to  
"ON".  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
OFF  
SIZE1  
VIDEO-1 MONITOR OUT  
DIGITAL-IN  
πTo VIDEO-1 MONITOR OUT  
® To select ON or OFF  
DIGITAL  
DIGITAL-IN AUDIO  
Press the MENU button to finish  
NEXT PAGE  
(1/5)  
MENU  
SELECT OPERATE  
EXIT  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Digital-In  
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture  
signal is being input to the DIGITAL-IN terminal. This option adjusts the position when a 480p  
picture signal is being displayed on the screen. There are two types of 480p picture signals:  
640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted  
by selecting either SIZE1 or SIZE2.  
INITIAL SETUP  
Press the MENU button  
PREVIOUS  
OFF  
SIZE1  
VIDEO-1MONITOR OUT  
DIGITAL-IN  
πTo DIGITAL-IN  
DIGITAL  
DIGITAL-IN AUDIO  
® To enter  
πTo select AUTO, SIZE1 or SIZE2  
Press the MENU button to finish  
NEXT PAGE  
(1/5)  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the  
Digital-In terminal and the picture is being displayed on the screen.  
You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the  
televison will select "SIZE1" or "SIZE2" automatically.  
Digital-In Audio  
This feature is used if you have a DTV or HDMI  
compatible component connected to your TV.  
INITIAL SETUP  
PREVIOUS  
OFF  
VIDEO-1MONITOR OUT  
DIGITAL-IN  
Press the MENU button  
SIZE1  
DIGITAL  
DIGITAL-IN AUDIO  
π†  
To DIGITAL-IN AUDIO  
®  
To select “ANALOG”, “DIGITAL” or "AUTO"  
Press the Menu button when nished  
NEXT PAGE  
(1/5)  
MENU  
SELECT OPERATE  
EXIT  
Notes:  
• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If  
your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.  
• Refer to your DTV or HDMI component’s instruction manual for more information.  
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page  
71.  
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,  
depending on the audio input from the HDMI.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
TINT  
Tint allows you to adjust the levels of red and green in your TV picture.  
COLOR  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
PICTURE  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker  
or brighter picture overall.  
BRIGHT  
You can adjust the overall brightness of the TV picture with the Bright control.  
DETAIL  
The Detail feature adjusts the level of fine detail displayed in the picture.  
ENERGY SAVER MODE  
The energy saver mode adjusts the level of brightness on the TV screen.  
Adjust the Picture Settings  
Press the MENU button  
PICTURE ADJUST  
π†  
To TINT, COLOR, PICTURE, BRIGHT, DETAIL  
or ENERGY SAVER MODE  
To enter  
PREVIOUS  
TINT  
STANDARD  
00  
00  
00  
00  
00  
COLOR  
PICTURE  
BRIGHT  
DETAIL  
®  
+02  
TINT  
ENERGY SAVER MODE  
NEXT PAGE  
(1/2)  
EXIT  
®  
π†  
To adjust the setting  
To move to the next setting  
MENU  
SELECT OPERATE  
Press the MENU button when finished  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
STANDARD  
π†  
®  
To COLOR TEMPERATURE  
To enter  
COLOR TEMPERATURE  
DIG. NOISE CLEAR  
COLOR MANAGEMENT  
DYNAMIC GAMMA  
SMART PICTURE  
RESET  
HIGH  
OFF  
OFF  
OFF  
ON  
COLOR TEMPERATURE LOW HIGH  
®  
To set LOW or HIGH  
Press the MENU button when finished  
NEXT PAGE  
(2/2)  
MENU  
SELECT OPERATE  
EXIT  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Digital Noise Clear  
With digital noise clear, this helps take our static or noise from a channel that may not be  
coming in clearly.  
Press the MENU button  
DIG. NOISE CLEAR  
OFF  
LOW  
HIGH  
π†  
®  
π†  
To DIG. NOISE CLEAR  
To enter  
To select the mode “LOW”, “HIGH” or “OFF”  
Press the MENU button when finished  
Color Management  
This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated  
to produce natural hues.  
Press the MENU button  
COLOR MANAGEMENT  
ON  
π†  
®  
π†  
To COLOR MANAGEMENT  
To enter  
To select the mode “ON" or "OFF"  
OFF  
Press the MENU button when finished  
Dynamic Gamma  
JVC's Dynamic Gamma Circuitry (DGC makes it easier to see dark areas when a picture has  
many dark areas, and makes it easier to see the bright areas when a picture has many bright  
areas. DGC is turned on, DGC analyzes and adjusts the total level of picture brightness  
balance, especially in dark areas where the level of greyscale is often lost, turning completely  
to black DGC automatically enhances the detail in these dark areas providing a more dynamic  
image with ner detail, so the optimum picture settings are automatically set for each picture.  
Normally use with DGC on.  
Press the MENU button  
DYNAMIC GAMMA  
ON  
π†  
®  
π†  
To DYNAMIC GAMMA  
To enter  
To turn ON or OFF  
OFF  
Press the MENU button when finished  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Smart Picture  
Smart Picture detects the APL (Average Picture Level) and adjusts the contrast suitable for  
what you are watching.  
Press the MENU button  
SMART PICTURE  
ON  
π†  
®  
π†  
To SMART PICTURE  
To enter  
To select the mode "ON" or "OFF"  
Press the MENU button when finished  
OFF  
Note:  
• When you have "DYNAMIC" selected in the "VIDEO STATUS", Smart Picture is not selected.  
Reset  
Reset resets all picture adjustments (tint, color, picture, bright, detail, energy saver mode, color  
temperature, dig. noise clear, color management and dynamic gamma and smart picture) at  
once to the default settings.  
Press the MENU button  
PICTURE ADJUST  
PREVIOUS  
STANDARD  
π†  
®  
To RESET  
To enter  
COLOR TEMPERATURE  
DIG. NOISE CLEAR  
COLOR MANAGEMENT  
DYNAMIC GAMMA  
SMART PICTURE  
RESET  
HIGH  
OFF  
OFF  
OFF  
ON  
The onscreen menu disappears for a moment,  
and then the settings are reset to the default  
setting for all the picture adjustments.  
NEXT PAGE  
(2/2)  
Press the MENU button when finished  
MENU  
SELECT OPERATE  
EXIT  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Sound Settings  
These settings allow you to change and adjust the sound on your television.  
BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with  
the bass adjustment.  
TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.  
BALANCE – Adjust the level of sound between the TV’s left and right speakers with the  
balance setting.  
Adjust the Sound Settings  
Press the MENU button  
SOUND ADJUST  
PREVIOUS  
π†  
®  
π†  
To BASS, TREBLE or BALANCE  
To adjust the setting  
To move to the next setting  
BASS  
00  
00  
00  
TREBLE  
BALANCE  
Press the MENU button when finished  
RESET  
NEXT PAGE  
MENU  
SELECT OPERATE  
EXIT  
Note:  
You can reset the sound adjustments (BASS, TREBLE and BALANCE) you set at once as  
the default setting when you select reset. See page 55.  
You can adjust BALANCE only when A.H.S. is off. See page 62.  
Reset  
Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.  
See page 55 on how to use reset.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
Set Clock  
The set clock function is described on page 26 as the interactive plug-in menu. You can choose  
to set the clock automatically or manually. If you need to set the clock again, follow the steps  
below.  
Press the MENU button  
π†  
®  
To SET CLOCK  
To enter  
When you set the clock automatically, choose AUTO by pressing the  
or  
®
arrows.  
π†  
®  
To TIME ZONE  
To select your time zone  
ATLANTIC  
SET CLOCK  
EASTERN  
CENTRAL  
MOUNTAIN  
HAWAII  
ALASKA  
PACIFIC  
MODE  
AUTO  
--: ----  
π†  
®  
To D.S.T. (daylight savings time)  
To turn D.S.T. ON or OFF  
TIME  
TIME ZONE  
DATE/YEAR  
D.S.T.  
ATLANTIC  
JAN/01/05  
ON  
Press OK to finish  
OK  
PRESS TO FINISH  
SELECT OPERATE  
Press the MENU button when finished  
MENU  
EXIT  
When you set the clock manually, choose MANUAL by  
pressing the or arrows.  
®
π†  
®  
π†  
®  
π†  
®  
To move to the hours  
To set the hours  
To move to minutes  
To set the minutes  
To TIME ZONE  
To select your time zone:  
SET CLOCK  
(Atlantic, Eastern, Central, Mountain, Pacific,  
Alaska or Hawaii)  
MODE  
MANUAL  
--: ----  
π†  
®  
π†  
®  
π†  
®  
π†  
®  
To DATE/YEAR  
To set the month  
To day  
To set the day  
To year  
TIME  
TIME ZONE  
DATE/YEAR  
D.S.T.  
ATLANTIC  
JAN/01/05  
ON  
OK  
PRESS TO START CLOCK  
To set the year  
MENU  
SELECT OPERATE  
EXIT  
To D.S.T. (daylight savings time)  
To turn D.S.T. ON or OFF  
Press OK to start clock  
THANK YOU !!  
Press the MENU button when finished  
Notes:  
• D.S.T. can be used when it is set to ON in the SET CLOCK menu.  
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts  
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on  
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in  
October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when you’re not  
home.  
Press the MENU button  
ON/OFF TIMER  
7:00 PM  
10:00 PM  
03  
ON TIME  
π†  
®  
®  
To ON/OFF TIMER  
OFF TIME  
CHANNEL  
ON VOLUME  
MODE  
To operate (begins with ON TIME)  
CURRENT  
EVERYDAY  
NO  
To set the hour (AM/PM) you want the TV to  
turn on  
ON/OFF TIMER  
®  
To move to minutes  
To set the minutes  
OK  
PRESS TO FINISH  
MENU  
SELECT OPERATE  
EXIT  
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the  
OFF TIME the same way as ON TIME  
®  
To accept OFF TIME and move to CHANNEL  
To select channel  
To ON VOLUME  
®  
To set the volume level  
To move to MODE  
®  
Choose ONCE or EVERYDAY  
To ON/OFF TIMER  
®  
Choose YES to accept the timer setting, choose NO if you don’t wish to accept  
Press the OK button to finish  
Press the MENU button to exit the menu  
Notes:  
• The on/off time cannot be set to locked or guarded channels.  
• In order for the on/off timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Multi Screen Function  
Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).  
Note: After you press any multiscreen button, if you press the menu button, only the picture  
adjust screen will appear.  
Index  
This allows you to quickly look at up to 12 channels at a time so that you can decide which one  
to watch.  
1
5
9
2
3
4
6
7
8
10  
11  
12  
Notes:  
• Only RF input signal will be displayed.  
You can watch the channel added in channel summary. See page 36.  
Twin  
Activate the split-screen option by pressing Twin on  
the remote control. The channel (or input) you were  
watching before pressing Twin will appear on the left,  
07  
V-1  
the new channel will appear on the right. The sound  
will continue to come from the main screen channel  
MAIN SCREEN  
PICTURE  
SPLIT SCREEN  
PICTURE  
(or input). To turn split-screen off and return to  
normal television viewing, press TWIN again or press  
the BACK button.  
Notes:  
• If the signal that you are watching is coming from the HDMI input, you cannot enter the  
SWAP or INDEX mode.  
• Main Screen and Split Screen will not display the same channel or input at the same time.  
You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.  
• Split-screen functions will not work with locked channels or channels blocked by V-Chip  
ratings limits. A grey screen will display instead.  
• With split screen, the picture from the component terminal and DIGITAL-IN terminal will  
not be displayed.  
• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of  
480p, 720p and 1080i from the component terminal and DIGITAL-IN terminal.  
• After you press the Select button, and select SPLIT SCREEN when you press the  
OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will  
be automatically selected about 8 seconds later.  
• Aspect does not work in Twin mode.  
• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.  
• When the cable card is inserted into the TV, the combination of analog broadcasting and  
digital broadcasting will not appear in the TWIN mode.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Freeze  
Pressing the FREEZE button causes the screen to change to the split-screen display with the still  
picture displayed on the right. In order to return to the normal display, press the FREEZE button  
once again.  
Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this  
function will cancel out.  
Swap  
You can exchange the channel (or input) displayed in the split screen window for the main  
screen image by pressing the SWAP button.  
Note:  
• It will only work in TWIN mode.  
Select  
With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you  
press SELECT button, the channel number on the top will be highlighted. Each press of SELECT  
will shift the channel.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Note:  
• When you press the power button on the TV, and you are tuned to a digital channel or i.Link,  
"NOW WARMING UP... PLEASE WAIT" appears on the screen. It takes a little while to warm  
up.  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 12:  
0 (Zero)  
1 (One)  
2 (Two)  
Tune  
Lets you decide the input channel and select it. After you press the number buttons on the  
remote, press the TUNE button. For example, to move to channel 12:  
1 (One)  
2 (Two)  
Press the TUNE button  
Input  
Selects the signal input source for the television: VIDEO-1, 2, 3, DIGITAL-IN or i.LINK for  
video devices like VCRs, DVD players or camcorders.  
Press the INPUT button  
By every press of the INPUT button, you can change the input mode.  
Notes:  
• When you return to TV mode, press the RETURN +/TV button or direct 10 key pad or CHANNEL  
+/– button.  
You can also access by pressing the INPUT button on the side of the TV instead of the remote  
control.  
• i.LINK can be selected only when you have an i.LINK device connected.  
TheaterPro D6500K  
The TheaterPro D6500K color temperature technology function makes sure that the video you  
watch is set to the standard color temperature, so that what you see is as true to what the film  
to video editors intended it to be.  
Press the THEATERPRO button  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Return +/TV  
The RETURN+/TV button has three functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the  
channels using the CH+ and CH– buttons.  
TV - Returns to the TV mode.  
Press the RETURN+/TV and hold for three seconds  
RETURN CHANNEL  
PROGRAMMED!  
The channel currently active has been programmed as your return+ channel. Now scan  
through the channels using the CHANNEL+/– buttons.  
Press the RETURN+/TV  
You will return to your programmed channel.  
To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The  
message “RETURN CHANNEL CANCELLED!” will appear.  
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel  
return+.  
Sound  
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) mode,  
BBE, SMART SOUND and A.H.B (Active Hyper Bass) on or off.  
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more  
effect.  
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility  
and musical realism.  
SMART SOUND - Decreases high sound levels, giving a regulated sound level.  
A.H.B. - You can reinforce the bass sound to maintain rich, full bass at low volumes, and enjoy  
a clear sound with boosted bass.  
SOUND EFFECT  
Press the SOUND button  
A.H.S.  
MOVIE MUSIC OFF  
ON OFF  
BBE  
π†  
To select A.H.S., BBE, SMART SOUND or  
A.H.B.  
SMART SOUND  
A.H.B.  
ON OFF  
ON OFF  
MENU  
OPERATE  
EXIT  
SELECT  
®  
To choose the setting  
Press the MENU when finished  
Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under  
USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of  
BBE Sound, Inc.  
Note: Smart Sound may become an unnatural effect, depending on the signal source.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous  
level, press MUTING again.  
Video Status  
The VIDEO STATUS button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
Standard - Resets the picture display to the factory settings.  
VIDEO STATUS  
Dynamic - Gives a vivid picture with better contrast when viewing in  
STANDARD  
a brightly lit room.  
DYNAMIC  
Theater - Gives a rich, film-like look to video when viewing in a  
THEATER  
dimly lit room.  
GAME  
Game - Used for when you are playing video games connected to  
your TV.  
Press the VIDEO STATUS button  
By every press of the VIDEO STATUS button, you change the mode.  
Note:  
You can also change the mode by pressing the πbuttons.  
You can also access the FRONT CONTROL PANEL screen by using the MENU button on  
the side of the TV instead of the remote control. It appears between INITIAL SETUP and  
PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose VIDEO  
STATUS by pressing MENU  
+/- buttons ( OPERATE  
®
on the side panel and choose a mode by using the CHANNEL  
).  
Natural Cinema  
Natural cinema corrects the problem of blurred edges which may occur when viewing a program  
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges  
of these programs, press NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct  
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the  
television rate of 30 frames-per-second.  
Press the NATURAL CINEMA button  
NATURAL CINEMA  
AUTO  
Notes: The natural cinema mode is automatically set to “AUTO” in the  
ON  
following cases:  
OFF  
• Turning on or off  
• Changing the channel or input mode  
• Using multi-screen functions  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals  
of 15 minutes, for a total time of up to 180 minutes.  
Press the SLEEP button  
0 15 30 45 60 75 90 105 120 135 150 165 180  
Sleep Timer Message  
20 seconds before the automatic shutoff, this message will appear:  
GOOD NIGHT!!  
PUSH SLEEP TIMER BUTTON  
TO EXTEND  
You then have 20 seconds to press the SLEEP button to  
delay the shut off for another 15 minutes.  
ML/MTS  
MTS technology allows several audio signals to be broadcast in analog at once, giving you a  
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP).  
Press the ML/MTS button  
MTS  
By every press of the ML/MTS button, you change  
the mode  
ON AIR  
STEREO  
ON AIR  
SAP  
MONO  
Notes:  
• When you are receiving a digital broadcast, if there are other languages, you can change the  
language by pressing the ML/MTS button.  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
• MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described  
on page 61.  
• ML/MTS will not work when you are using the Digital-In.  
You can also change the mode by pressing the πbuttons.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Display  
The display screen shows the current status of timers, inputs and XDS ID.  
Press the DISPLAY button  
The screen to the right shows the following  
information:  
05 KLVX PBS  
JAZZ FESTIVAL  
• The current channel or AV input (Channel 05)  
NOW  
12:20 PM  
OFF  
• The current time (12:20 pm)  
• Sleep timer status/minutes remaining (The Sleep  
Timer is off)  
SLEEP TIMER  
ON/OFF TIMER  
EVERYDAY  
7:00 PM  
ON TIME  
• On/off timer status (Set to turn on everyday at 7:  
OFF TIME  
10:00 PM  
00 PM, off at 10:00 PM)  
• Each Press of the DISPLAY button changes the  
display mode:  
Display  
Time  
Channel  
Off  
Display - Full screen shown above  
Time - Shows the current time only  
Channel - Shows the current channel  
Off - Turns display off  
Notes:  
You may also turn off the display at any step by pressing MENU.  
• If the clock, sleep timer or on/off timer are not set, the display screen will show:  
“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
Press the C.C. button  
CLOSED CAPTION  
Notes:  
OFF  
SMART CAPTION  
ON  
• SMART CAPTION will appear when you press the MUTING button,  
only on channels where the broadcast contains closed captioning.  
• When you select ON, it will be the mode selected in the Closed  
Caption Menu.  
• See page 46 when you set the caption/text mode.  
You can also change the mode by pressing the πbuttons.  
Channel +/–  
Use these buttons to move up or down all the available channels your TV is able to receive.  
Volume +/–  
Use these buttons to raise or lower the TV’s volume level.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Favorite  
The Favorite button allows you to select your favorite channels easily. First, you must register  
the channels that you like. See how to register below.  
Press the FAVORITE button  
FAVORITE  
The favorite channel list will appear.  
PREVIOUS  
π†  
To select the channel you want to watch  
101  
102  
D103  
<
CBS  
FOX  
PBS2  
>
Press the OK button  
It will change to the channel you have selected.  
D107  
8
HBO  
ABC  
Register the favorite channel  
NEXT  
Press the channel number you want to register  
The channel program will change.  
Press the FAVORITE button for three seconds  
The channel will be registered in the favorite channel list.  
Notes:  
• Both analog and digital channels can be registered. The digital channels have a "D" in front  
of the channel number.  
• The maximum number of channels you can register is 24.  
• If you have registered the maximum number of channels, and try to register more channels,  
the oldest channel you registered will be deleted.  
• Sub channels can not be registered.  
• The newest channel you registered will appear at the top of the list.  
• Regarding digital channels, see pages 73 - 78.  
Delete the favorite channel  
Press the FAVORITE button  
The favorite channel list will appear.  
π†  
®  
To select the channel you want to delete  
To enter  
Press the OK button  
The channel was deleted.  
Press the FAVORITE button when finished  
Note:  
• Before pressing the FAVORITE button when you are finished, press the ® button again, and  
you can return to the deleted channel.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect  
This feature will help you adjust the picture you are watching to give you the best possible  
picture quality.  
Aspect Ratios  
PANORAMA - With this ratio a normal  
4:3 aspect picture is stretched to fit the  
dimensions of the 16:9 aspect screen.  
REGULAR - The regular ratio is used  
when you want to watch a 4:3 broadcast  
or recorded program without modifying the  
original picture to fit the dimensions of your  
16:9 screen. The 4:3 picture will fill the  
screen from top to bottom, while black bars  
will appear to fill up the remaining space  
along the picture’s sides. The 4:3 picture  
will be centered within the boundaries of the  
16:9 screen.  
CINEMA - This ratio “zooms in” on the  
center part of a 4:3 aspect picture, blowing  
it up to fill the 16:9 screen.  
CINEMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black surrounding bars.  
FULL - This is the ratio to use when  
watching 16:9 High-Definition broadcasts.  
SLIM - This aspect mode shrinks the  
screen of 16:9 to 4:3. There are some  
programming that is already stretched by  
mistake at broadcasting companies, so  
this mode corrects it. Black side bars will  
appear.  
PANORAMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black side bars.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect Ratios (Continued)  
Press the ASPECT button  
By pressing the ASPECT button, you can change the size.  
When you change the aspect ratios, it is different from their broadcast or recorded program.  
NTSC, 480i, 480p  
HD (1080i, 720p)  
ATSC (1080i, 720p)  
ATSC (480i, 480p)  
ASPECT  
PANORAMA ZOOM  
CINEMA ZOOM  
FULL  
ASPECT  
PANORAMA  
CINEMA  
ASPECT  
PANORAMA ZOOM  
CINEMA ZOOM  
FULL  
FULL  
REGULAR  
SLIM  
Notes:  
You can also choose the size by pressing the πbuttons.  
• When you change the aspect ratio or signal, reset the picture position to center.  
You can also access the FRONT PANEL CONTROL screen by using the MENU button  
on the side of the TV instead of the remote control. It appears between INITIAL SETUP  
and PICTURE ADJUST screen, and it has VIDEO STATUS and ASPECT menus. Choose  
ASPECT by pressing Menu  
+/- buttons ( OPERATE  
®
on the side panel and choose a mode by using the CHANNEL  
).  
• "SLIM" can only be dispalyed when the signal is ATSC (480i or 480p).  
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to  
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you  
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect  
mode after the televison changed it to FULL automatically, the televison will change to the  
aspect mode you choosed.  
• If you are in Media Card Viewer mode, Aspect can not be used. (LT-40X776 Only)  
Menu  
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate  
the onscreen menu system.  
• See individual topics like “Sound Adjust” for specific information on using menus.  
OK  
This button confirms your selection when you are in one of the onscreen menus.  
Back  
This button allows you to go back in the menu to change a selection or correct a mistake.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
TV/CATV Slide Switch  
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to  
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.  
Note:  
• See page 28 for information on programming your remote for cable box operation.  
VCR/DVD Slide Switch  
You can control a VCR or DVD player with the buttons on the lower part of the remote control.  
Move the slide switch to VCR or DVD to operate.  
Notes:  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 29.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 30.  
VCR Buttons  
You can use this remote control to operate the basic functions of your VCR. These functions  
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on and  
power off.  
Move the selector switch to VCR to operate.  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 29.  
DVD Buttons  
You can also use this remote control to operate the basic functions of your DVD player. These  
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,  
power on and power off.  
Move the selector switch to DVD to operate.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 30.  
Light  
All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide  
switch and Light button. Press the LIGHT button to turn the illumination on for 4 seconds.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Setup  
Digital Setup  
Use this function when you are receiving a digital broadcast.  
Press the MENU button  
Digital Setup  
Antenna Level  
π†  
To DIGITAL SETUP  
To enter  
Digital Sound  
PCM  
4:3  
®  
Aspect Ratio  
The onscreen will appear  
Cable Card Application  
i.LINK Auto Play  
Software Update  
OFF  
Notes:  
• Software Update will only appear when the SD Card  
is inserted.  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
• If you are watching an analog channel, you can still  
access the digital setup menu at anytime, while you are doing this, the background screen  
will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital  
setup menu.  
Antenna Level  
Confirms the present antenna level.  
Antenna Level  
Press the MENU button  
75  
π†  
To DIGITAL SETUP  
To enter  
BACK  
MENU  
®  
Back  
Exit  
π†  
To Antenna Level  
To enter  
®  
Note:  
• If you are watching an analog channel or a signal from your i.Link device, antenna level will  
not appear.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Setup  
Digital Sound  
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is  
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can  
enjoy listening in 5.1ch sound when watching digital broadcasts.  
Press the MENU button  
π†  
®  
To DIGITAL SETUP  
To enter  
π†  
To Digital Sound  
®  
To select PCM or DOLBY DIGITAL  
Press the MENU button when finished  
Notes:  
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it  
cannot output the sound from the speakers.  
• For connecting an amplifier using the optical output, see page 23.  
Manufactured under license from Dolby Laboratories. "Dolby", and the  
double-D symbol are trademarks of Dolby Laboratories.  
Aspect Ratio  
You can select the aspect mode for ATSC from 4:3 or 16:9.  
Press the MENU button  
π†  
®  
π†  
®  
To DIGITAL SETUP  
To enter  
To Aspect Ratio  
To select 4:3 or 16:9  
Press the MENU button when finished  
Notes:  
• Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT.  
• Make sure the mode you choose is the same as the TV’s aspect ratio when the recorded  
program is played back, so that you can obtain a good picture quality, free from any unatural  
distortions.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Setup  
Cable Card Application  
Press the MENU button  
π†  
®  
π†  
®  
To DIGITAL SETUP  
To enter  
To Cable Card Application  
To enter  
Press the OK button  
The application will perform  
i.LINK Auto Play  
When playing a D-VHS tape, you can set it to the i.LINK input automatically, or manually.  
Press the MENU button  
π†  
®  
π†  
To DIGITAL SETUP  
To enter  
To i.LINK Auto Play  
®  
To select ON or OFF  
ON: Set to i.LINK input automatically  
OFF: Select the input manually  
Press the MENU button when finished  
Software Update  
At first, insert the SD(Multi-media) card into the memory card slot. This function will appear  
only when you insert an SD Card.  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To DIGITAL SETUP  
To enter  
To Software Update  
To enter  
Checks the card if it needs an update or not  
Press the MENU button when finished  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Button Functions  
Digital CH D/A (Digital/Analog)  
The D/A button changes the analog and digital channel. Each time you press the D/A button,  
you can switch back and forth the analog and digital channels. Digital channels have a "D" in  
front of the channel number.  
Note:  
• If the cable card is inserted into the TV, you cannot use the D/A button. You can select a  
digital channel only.  
Press the D/A button  
To watch digital channels  
For example, to move to channel D23:  
Press 2 (Two)  
Press 3 (Three)  
Press the TUNE button  
Sub Channel  
The main channel sometimes has minor channels (Sub Channels). By using the SUB button,  
you can select a sub channel easily.  
For example, to move to sub channel 123-45:  
Press 1 (One)  
Press 2 (Two)  
Press 3 (Three)  
Press the SUB button  
Press 4 (Four)  
Press 5 (Five)  
Press the TUNE button  
Note:  
• If there are more than 2 major channels, select the digital channel by using the πbuttons  
and then press the OK button.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Button Functions  
i.LINK Menu  
i.LINK has two menus - Controller and Device.  
By connecting a D-VHS VCR with an i.LINK cable, you can set the timer easily.  
Notes:  
• The i.LINK/Timer function will only work when you are receiving digital programming only.  
• As for the connection of a D-VHS VCR with the i.LINK cable, see page 24.  
• When operating the i.LINK, don't insert or disconnect the i.LINK cable.  
Controller  
You can operate a D-VHS VCR connected with an i.LINK cable by using this controller.  
Notes:  
• If the i.LINK is not connected, the Controller OSD will not appear. The OSD of device on  
page 75 will appear.  
• Some controller operations may differ from your D-VHS VCR operations.  
Press the i.LINK MENU button  
i.LINK  
Controller  
D-VHS1  
STOP  
00:00:00  
POWER  
Device  
®πTo select the key you want to operate  
Press the OK button  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Button Functions  
Device  
To operate, select a device.  
i.LINK  
Controller  
Device  
Renumber  
Page 2/3  
D-VHS1  
JVC  
HM-DH30000U  
D-VHS2  
JVC  
HM-DH40000U  
HD-MOVIE 1  
GR-HD1  
JVC  
π†  
To select your device connecting with i.LINK  
Press the OK button  
Notes:  
• If you do not select the device, you cannot use the i.LINK timer functions.  
• When one device is selected and you select controller, you will move to the Controller  
onscreen.  
• The devices listed on the device onscreen are only D-VHS and HD-MOVIE that have i.LINK,  
which can be recognized on this television. However, you can not record programs to HD-  
MOVIE.  
• If you disconnect one device, it will be removed from the list. Then, select Renumber to  
rearrange the list in the new order.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Button Functions  
Timer  
You can set the two timers: Record and view. The timer starts the recording or turns to the  
channel you set for it automatically.  
Reservation  
Press the TIMER button  
π†  
To New Reservation  
Press the OK button  
New Reservation  
Timer  
Rec  
Timer Mode  
Channel  
Date  
35-1  
V
New Reserva
Sep. 10 (wed)  
5:00PM  
Start Time  
End Time  
80-3 PBS1D
6:00PM  
Sep. 11 (Wed
335-1 KDVR
Weekly/Daily  
Weekly  
ON  
i.LINK  
i.LINK  
R
R
R
Sep. 11 (Wed
Rec to i.LINK  
335-1 KDVR
Sep. 18 (Wed
Set Timer  
35-1 PBPBP
Sep. 18 (Wed
Cancel  
®  
To Timer Mode  
To select Rec or View  
To Channel  
®  
To select the channel you want to set the timer for  
To Date  
®  
To select the date  
To Start Time  
®  
To set the start time  
To End Time  
®  
To set end time  
To Weekly/Daily  
®  
To select Once, Weekly, Daily(Sun.-Sat.), Daily(Mon.-Sat.) or Daily(Mon.-Fri.)  
To Rec to i.LINK  
®  
To select ON or OFF  
To Set Timer  
Press the OK button  
R
If you set the Rec on timer mode, set recording  
title.  
is added in front of the program  
is added in front of the program  
If you set the View on timer mode, set viewing  
title.  
V
Notes:  
• In order for the timer setting to work, you must set the clock on your television. See page  
57.  
• When you want to edit the timer settings, see Timer Edit on page 77.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Button Functions  
Timer Edit  
When you want to confirm the timer you set or edited, or delete the timer setting, use this  
function.  
Timer Edition  
Press the TIMER button  
π†  
To select the timer list you want to edit  
Press the OK button  
Timer Edit  
Timer  
Rec  
Timer Mode  
Channel  
Date  
35-1  
V
New Reserva
Sep. 10 (wed)  
5:00PM  
Start Time  
End Time  
80-3 PBS1D
6:00PM  
Sep. 11 (Wed
335-1 KDVR
Weekly/Daily  
Weekly  
ON  
i.LINK  
i.LINK  
R
R
R
Sep. 11 (Wed
Rec to i.LINK  
335-1 KDVR
Sep. 18 (Wed
Set Timer  
35-1 PBPBP
Sep. 18 (Wed
Cancel  
Delete  
®πTo change the setting you want to edit  
To Set Timer  
Press the OK button  
Timer Deletion  
Press the TIMER button  
π†  
π†  
To select the timer list you want to delete  
Press the OK button  
To Delete  
Press the OK button  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Button Functions  
Cancel the timer recording  
When you record a digital program now, you can cancel the recording.  
Press the TIMER button  
Timer  
Sep. 10 (Wed) 4:55PM  
Page 1/1  
π†  
To select the timer list you want to cancel  
the recording  
New Reservation  
80-3
V
R
Do you want to terminate current program?  
Press the OK button  
Sept
335-
Sept
i.LINK  
N
o
Y
e
s
The message "Do you want to  
terminate current program ?" will  
appear.  
®  
To select  
YES: Cancel the recording  
NO: Continue the recording  
Press the OK button  
Guide  
You can view the program from the GUIDE.  
Notes:  
The GUIDE function will only work when you are receiving digital programming only.  
• The GUIDE will not show the correct time and date if you have not performed the set clock  
function on your television. See page 57.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Card Viewer  
Note:  
• Media Card Viewer is for LT-40X776  
Readable Media Card  
This TV can read the following media cards:  
SD Card, MMC (Multi Media Card), Memory Stick, xD-Picture Card, CF Card (CompactFlash  
Card), Removable microdrive Hard Disk for JVC digital media camera "Everio" (a type of CF  
Card)  
• Read the cautions on the different types of media cards  
• Do not remove a media card if it is being used by the TV. A malfunction may cause the card  
not to operate properly. JVC shall not provide any compensation for any lost content.  
• SM Card (Smart Media Card) is not supported.  
• CF Card and removable microdrive Hard Disk for JVC "Everio" camera is a type of CF Card  
compliant with CF+ Type II.  
Supported Card Media  
The following media are supported in this unit.  
(As of May 2005)  
Microdrive  
compact hard disks  
Hitachi  
2GB, 4GB  
* Hard disks with 1GB or smaller  
capacity are not supported.  
SD Memory Cards  
Panasonic  
LEXAR  
128MB, 256MB, 512MB, 1GB  
128MB  
SanDisk  
LEXAR  
32MB, 64MB, 128MB, 256MB  
512MB, 1GB  
CompactFlash Cards  
xD-Picture Cards  
OLYMPUS  
Fujifilm  
256MB  
* This TV does not support any  
Type M (large capacity) xD-Picture  
Card™ product  
32MB, 64MB, 128MB  
64MB, 128MB  
Memory Sticks  
SONY  
* Memory Stick PRO cards are not  
supported.  
Notes:  
• Operation is not guaranteed for other card media. Usage of other card media can result in the  
loss of data already recorded on the card.  
• Playback of MPEG-2 video on CompactFlash cards requires a high-speed type card.  
• Conversion adapters for card media are not supported.  
• The unit may have trouble detecting certain cards. In this case, leave the card inserted, and  
turn the power off and then on again.  
• Recognition of the card can take signicantly more time if the card contains a large number of  
les.  
* The above supported card media have been conrmed to work with this TV. However, they  
are not guaranteed to work with your cards.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Card Viewer  
How to insert Media Card  
Before you insert a media card into the card slot, open the door on the left side panel and  
make sure of the slot type and the direction to insert the card as illustrated. To access, gently  
push the "PUSH-OPEN" on the door to open it. Once you have inserted the media card, the  
message "PLEASE CLOSE THE DOOR TO OPERATE" will appear on the screen. Then,  
close the door. To remove the media card, press the card into the slot again after opening the  
door.  
xD-Picture  
Memory Stick  
SD  
or MMC  
Ridge  
CF  
Metal Terminal  
*Removable Microdrive Hard Disk  
does not have a ridge.  
Note:  
• If you do not close the door, it will not operate.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Card Viewer  
How to operate Media Card Viewer  
Press the MENU button  
SELECT CARD, AND PRESS OK  
SD Card  
π†  
®  
π†  
To MEDIA CARD VIEWER  
To enter  
COMPACT FLASH  
To select SD Card or COMPACT FLASH  
card  
If you only have one media card inserted in  
the card slot, this menu will not appear.  
®  
To enter  
The following PHOTO, VIDEO or FILE will appear  
SELECT ONE, AND PRESS OK  
PHOTO  
VIDEO  
FILE  
®  
To select PHOTO, VIDEO or FILE (Continue to page 82 or 83)  
Notes:  
• The above screen will change depending on the type of card you insert.  
• The sound from the media card can not be changed.  
• Onscreen language is linked to LANGUAGE in the Initial Setup Menu.  
• When the media card viewer function is used, the menu is not used.  
• The following message appears on the TV screen in the following cases:  
- When you are inserting a media card or when the door is open, "PLEASE CLOSE THE  
DOOR TO OPERATE".  
- When no media card is inserted "NO MEDIA DETECTED"  
- When no files are found on the media card "NO FILE FOUND"  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Card Viewer  
PHOTO  
®  
Select PHOTO  
Press the OK button  
The right nine images appear.  
C F  
π® To select an image that you like  
Press the OK button  
The slide show starts.  
Notes:  
To stop the slide show, press the BACK button.  
To pause the slide show, press the OK button.  
To play again, press the OK button.  
• In thumbnail view, the time to display the  
images varies depending on the number of les  
recorded on the card.  
Page  
0001/  
0003  
Illustration when a CF card is being  
used  
Rotation  
When you press the OK while you are viewing the slide show in PHOTO mode, the image is  
paused temporarily. Then press πwhile the image is paused, and you can rotate the image.  
Notes:  
• Although the image has changed because it is rotated, it will not be saved to the media card.  
• When rotation is performed, the aspect ratio of the image may change. (The angle of view  
may also change for some images.)  
VIDEO  
®  
Select VIDEO  
Press the OK button  
The right nine images appear.  
C F  
π® To select an image that you like  
Press the OK button  
The video show starts.  
Page  
0001/  
0003  
Notes:  
To stop the video show, press the BACK button.  
• The volume can not be changed when these nine  
images appear.  
• In the playback of MPEG4 images, verification has  
been made for basic playback only.  
Illustration when a CF card is being  
used  
• In thumbnail view, the time to display the images varies depending on the number of les  
recorded on the card.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Card Viewer  
File playback note for PHOTO and VIDEO  
• Some recorded les can result in errors or may not be played back correctly. Sometimes,  
JPEG, MPEG2, and MPEG4 les downloaded from the Internet or other sources cannot  
be played back correctly. Images also may not be played back correctly depending on the  
camera that was used for recording.  
• Noise may appear when images change in the slideshow.  
• The display order in the slideshow follows alphabetical order of the le names.  
• If video, still images, and other les with different extensions are stored in the same folder,  
start of video playback may be choppy or other playback problems may occur. Storage of  
different le types in separate folders is recommended.  
• When video or still images are recorded by Everio, only video recorded in a compact hard  
disk can be played back. Video recorded in the SD card cannot be played back.  
• After editing images on your PC using the “CyberLink DVD Solution” image editing software  
supplied with Everio, be sure to change the extension from mpg to mod before playing  
back with this unit. The audio cannot be played unless the mpg extension is changed. (The  
extension for images recorded in Everio is mod, but the extension is automatically changed  
to mpg after editing with “CyberLink DVD Solution”.)  
You may not be able to replay audio on some les created or edited with "CyberLink DVD  
Solution" software (provided with some JVC digital cameras). This will depend upon the  
way in which the les were created or edited and is not a malfunction of the TV.  
FILE  
®  
Select FILE  
Press the OK button  
The following screen appears.  
F I L E L I B R A R Y  
File Size  
Date  
91KBytes  
01/01/2005  
...  
DVC00024  
DVC00025  
DVC00026  
DVC00027  
DVC00028  
DVC00029  
DVC00030  
Illustration of CF file library  
FOLDER 100JVCGR  
CF 0002/0007  
π†  
Everytime a file is selected in the left frame, the image will appear in the right frame.  
Notes:  
To be released from the FILE, press the BACK button.  
• The date displayed in the FILE view is the date the images were recorded. The date may not  
be displayed for some cameras.  
• Only the rst eight characters of the le name are displayed. Double-byte characters are not  
supported.  
• The display order of thumbnails follows alphabetical order of the folder names and then  
alphabetical order of the le names in the folders.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Card Viewer  
Operation Note  
Operation of the CH+ and CH- keys is different for slideshows started from the PHOTO/VIDEO  
icon and for slideshows started from the FILE icon.  
1) When you select VIDEO icon and play the video, press the following buttons:  
CH+ : Fast-Forward  
CH- : Rewinding  
VOL+ : Up volume  
VOL- : Down volume  
OK : Pause or Play (Each pressing will switch back and forth)  
2) When you select FILE icon and play the PHOTO or VIDEO:  
While playing PHOTO – You cannot use CH+/CH- and VOL+/-  
While playing VIDEO – You cannot use CH+/-. You can change volume by using  
VOL+/-.  
Note: While using the card viewer, do not unplug the television from the AC outlet. It will cause  
the card to break.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media Card Viewer  
Specifications  
1) Supported card media  
CF type  
Microdrive  
Hard Disk  
SD  
Memory  
Card  
Memory  
Stick  
xD-Picture  
Card  
Card Media  
CompactFlash  
MPEG2-PS  
MPEG4  
JPEG  
X
X
X
X
X
X
X
X
X
X
X
X
2) Supported le systems  
(1) FAT16  
(2) FAT32  
(3) VFAT  
3) Supported data management standards  
(1) DCF 2.0 (still image)  
(2) SD-Picture (still image)  
(3) SD-Video Entertainment Video Prole (video) compliant  
(Video: MPEG2-PS MP/ML, Audio: AC-3 / 48 kHz sampling)  
(4) SD-Video Mobile Video Prole (video) compliant  
(Video: MPEG4 Simple prole/ Level 1 restricted to Level 3, Audio: G.726)  
4) Supported image le standards and extensions  
(1) Exif 2.21 (Extensions: JPG, jpg, JPEG, jpeg)  
(2) JFIF (Extensions: JPG, jpg)  
(3) SD-Video MPEG2-PS (Extensions: MOD, mod, MPG, mpg, MPEG, mpeg)  
(4) SD-Video ASF MPEG4 (Extensions: ASF, asf)  
5) Supported image size and rate  
(1) Still images  
160×120 to 2560×1920 pixels (The size is automatically  
adjusted when displayed.)  
(2) Video  
1) MPEG2-PS  
720×480 pixels (525/60 systems)  
352×240 pixels (525/60 systems)  
2) MPEG4  
352×288 pixels/30 frames  
240×176 pixels/15 frames  
160×120 pixels/5 frames  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Information  
Weak Signal  
This OSD warning appears when the digital channel that you have selected is too weak to  
receive or no signal is being detected for that channel.  
Weak Signal  
15  
No Program  
If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM"  
appears on the television screen. It appears when that channel is not receiving a signal and you  
have the Noise Muting function OFF and you have a single screen. It moves automatically every  
two seconds to prevent the screen from burn-in.  
Note:  
• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off  
functions that you set, are still active.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable Card Information  
Cable card offers information when a cable card is inserted into the CABLE CARD slot on the  
back of the television.  
Notes:  
• Please contact your local cable company regarding detailed information.  
• When the cable card is inserted into the cable card slot, if you turned the power off, the fan will  
continue to rotate because the program information is being renewed. This is normal.  
Cable Card Connection  
C
S
AT  
/ DIGIT  
CABLE IN  
AL  
DIGITAL-IN  
Cable Card  
CARD  
Note for inserting Cable Card:  
• When you are watching a digital program, and if a weather or government emergency occurs,  
the following may occur automatically regardless of what channel you were watching: the  
channel may change, the screen will disappear or important text will appear on the screen.  
The information is transmitted from EAS (Emergency Alert System), Firmware Upgrade of  
Cable Card or compulsory HTML.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the table below to check the condition. If you think that there is a problem, contact the  
JVC Service Center where you purchased the television.  
PROBLEMS  
CHECK  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
There is no picture  
or sound  
• The antenna could be disconnected.  
• The input mode could be set improperly. See page 61.  
• The tuner (Auto Tuner Setup) could be set improperly. See page 35.  
• The TV station may be having difficulties. Check to see if other stations are working.  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
• Check that the TV/CATV switch is in the proper position.  
You may be too far from the TV. You must be within 23 feet (7 meters).  
You cannot select a  
certain channel  
• Make sure the channels have been programmed. See "Channel Summary", page 36.  
• Check to see if the channel is locked. See "Channel Summary - Lock" page 37.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the On/Off Timer is set. See page 58.  
• Check to see if the Sleep Timer was set. See page 64.  
It does not operate  
correctly  
• This television is operated by a microprocessor. It is possible that external noise or  
interference is causing the problem. If the television does not function correctly, remove the  
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet  
again and operating the television.  
The clock is wrong  
• The power was interrupted and the clock was not reset. See page 57.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 53.  
• The Video Status mode may be turned to the wrong setting. See page 63.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
Screen is 80% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 46.  
• Make sure the MTS settings are correct. See page 64.  
Stereo or bilingual  
programs can't be  
heard  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
PROBLEMS  
CHECK  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
The AUTO DEMO  
• The On Timer that you programmed has started.  
finished automatically • The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip.  
• The Auto Shut Off that you programed has occured.  
It does not operate  
correctly  
• Press the CHANNEL- and VOLUME- buttons on the side panel of the TV simultaneously  
for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug  
the power cord and plug it back in.  
The following are not malfunctions.  
The television may make a creaking sound if the temperature of the room or the  
temperature of the inside of the television changes. If there is no problem with the screen or  
sound, then there is no need to worry.  
Although the picture may be temporarily disturbed and noise may be seen on the screen if  
the power is turned on immediately after it has been turned off, this is not a malfunction.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model  
LT-26X776  
LT-32X776  
Type  
LCD Flat Television  
Reception Format NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable  
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper  
and Ultra bands (191 channel frequency synthesizer system)  
Reception Range  
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel  
numbers) is not recommended for your TV set.  
Power Source  
AC 120V, 60 Hz  
Power Consumption  
139W  
173W  
26 inch / 64.8 cm  
measured diagonally,  
16:9 ratio  
32 inch / 80.2 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Audio Output  
Speakers  
10W + 10W  
6.6 cm round x 2  
Antenna Terminal  
(VHF/UHF,  
75 ohms (VHF/UHF)(F-type connector)  
ATSC/DIGITAL  
CABLE IN)  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
External Input Jacks  
Component Input  
Jack  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
Pb/Pr: 0.7 Vp-p 75 ohms  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
S-Video Input Jacks  
Monitor/Recording  
Output  
Video: 1Vp-p, 75ohms  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Audio: 250mVrms (-10dBs)  
Fs-18dB Low Impedance  
Optical Output  
Digital Audio  
Digital Out (optical) x 1  
TS IN/OUT (4-pin, S400) x 2  
IEEE1394 compliant DTCP digital copy protection compatible  
i.LINK In/Out Jack  
Digital–In  
HDMI jack x 1  
Note: The Digital–In terminal is not compatible with picture signals of a  
personal computer  
Dimensions (inch/cm)  
W X H X D  
27 3/4 x 21 7/8 x 12 1/4  
(with stand)  
31 7/8 x 24 3/4 x 12 1/4  
(with stand)  
70.3 x 55.3 x 30.9  
(with stand)  
80.8 x 62.8 x 30.9  
(with stand)  
27 3/4 x 19 1/8 x 4 5/8  
(without stand)  
31 7/8 x 22 x 4 5/8  
(without stand)  
70.3 x 48.3 x 11.5  
(without stand)  
80.8 x 55.9 x 11.6  
(without stand)  
43.2 / 19.6 (with stand)  
44.9 / 20.4 (with stand)  
Weight (lbs / kg)  
35.9 / 16.3 (without stand)  
37.6 / 17.1 (without stand)  
Accessories  
Refer to "unpacking your TV", page 9  
Specifications subject to change without notice.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model  
LT-37X776  
LT-40X776  
Type  
LCD Flat Television  
Reception Format NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable  
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper  
and Ultra bands (191 channel frequency synthesizer system)  
Reception Range  
Reception of channel A-5 ("95" of the TV set's on-screen cable channel  
numbers) is not recommended for your TV set.  
Power Source  
AC 120V, 60 Hz  
Power Consumption  
202W  
226W  
37 inch / 94.9 cm  
measured diagonally,  
16:9 ratio  
40 inch / 101.5 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Audio Output  
Speakers  
10W + 10W  
6.6 cm round x 4  
Antenna Terminal  
(VHF/UHF,  
75 ohms (VHF/UHF)(F-type connector)  
ATSC/DIGITAL  
CABLE IN)  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
External Input Jacks  
Component Input  
Jack  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
Pb/Pr: 0.7 Vp-p 75 ohms  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
S-Video Input Jacks  
Monitor/Recording  
Output  
Video: 1Vp-p, 75ohms  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Audio: 250mVrms (-10dBs)  
Fs-18dB Low Impedance  
Optical Output  
Digital Audio  
Digital Out (optical) x 1  
TS IN/OUT (4-pin, S400) x 2  
IEEE1394 compliant DTCP digital copy protection compatible  
i.LINK In/Out Jack  
Digital–In  
HDMI jack x 1  
Note: The Digital–In terminal is not compatible with picture signals of a  
personal computer  
SD Card, MMC, CompactFlash,  
Removable microdrive Hard Disk  
for JVC digital media camera "Everio"  
(a type of CF card), Memory Stick,  
xD-Picture Card  
Readable Cards  
Dimensions (inch/cm)  
W X H X D  
36 1/2 x 27 1/8 x 12 7/8  
(with stand)  
39 3/8 x 29 x 12 7/8  
(with stand)  
92.6 x 68.7 x 32.5  
(with stand)  
100 x 73.4 x 32.5  
(with stand)  
36 1/2 x 24 7/8 x 4 3/8  
(without stand)  
39 3/8 x 26 1/2 x 4 1/4  
(without stand)  
92.6 x 63.2 x 10.9  
(without stand)  
100 x 67.1 x 10.6  
(without stand)  
61.6 / 27 (with stand)  
69.3 / 31.5 (with stand)  
Weight (lbs / kg)  
47.7 / 21.7 (without stand)  
54.3 / 24.8 (without stand)  
Accessories  
Refer to "unpacking your TV", page 9  
Specifications subject to change without notice.  
• The open source software is embedded in this product. For more information, please go to:  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

IOGear Network Card GBU301 User Manual
Jasco Computer Monitor 45261 User Manual
Jenn Air Ventilation Hood LI3UUB User Manual
Jensen Speaker JXA8BA User Manual
JL Audio Home Theater Server MCS 3800 User Manual
Karcher Vacuum Cleaner KMR 1550 D User Manual
Kenmore Vacuum Cleaner 11623637C User Manual
Kenwood Car Stereo System KDC 132 User Manual
Kenwood TV DVD Combo KVT 647DVD User Manual
Kramer Electronics Water Heater TP 330FW User Manual