DIGITAL STILL CAMERA
ENGLISH
GC-X1
STILL CAMERA
INSTRUCTIONS
LYT0544-001C
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
EN
3
This unit is produced to comply with Standard
IEC Publ. 65.
SOME DO’S AND DON’TS ON THE SAFE USE
OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards
but, like any electrical equipment, care must be taken if you are to obtain the best results and
safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections
between pieces of equipment) are properly made and in accordance with the manufacturer’s instruc-
tions. Switch off and withdraw the mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equip-
ment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is
damaged in any way — switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed
for unattended operation or has a standby mode. Switch off using the switch on the equipment and
make sure that your family knows how to do this. Special arrangements may need to be made for
infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements
of road safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating
will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit
the manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
— NEVER let anyone especially children push anything into holes, slots or any other opening in the case
— this could result in a fatal electrical shock;
— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK START
4
EN
Power cord
Power outlet
Power lamp
DC cord
AC adapter
(AA-V37)
DC input connector
Connect the Camera to a Power
Outlet. (੬ pg. 20)
Open the connector cover on the rear of the
1 camera.
Connect the DC cord to the DC input
2 connector.
Connect the DC cord to the DC input
connector on the AC adapter.
3
Connect the power cord to a power outlet.
4 •The power lamp lights.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
Knob
Memory card cover
Memory card (3.3V type)
Insert the Memory card. (੬ pg. 22)
Open the Memory card cover.
1 •Slide the knob to the open position.
Insert the Memory card.
2 •Insert the card so that the contact surface is
facing up and the notch on the card is on the
right.
Close the Memory card cover.
3 •Slide the knob to the close position.
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK START (cont.)
6
EN
MODE switch
w e button
Shutter button
Lock button
Lock button
Power dial
Power dial
4
Shoot a Picture. (੬ pg. 30)
Play back a Picture. (੬ pg. 31)
Turn the Power dial to “A” (full auto mode).
Turn the Power dial to “B”.
1 •Hold the Lock button down while turning the 1 •Hold the Lock button down while turning the
Power dial.
Power dial.
Point the lens at the subject and half-press the
Select “STILL PB” with the MODE switch.
2 Shutter button.
2
•Look through the finder.
Press the w e button to select the picture that
•The focus is attained when the shoot standby
lamp (green) changes from flashing to
steadily on.
3 you wish to view.
Press the Shutter button all of the way to take
3 the picture.
•The picture image is stored in the Memory
card.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAJOR FEATURES
EN
7
Three high-quality still image shooting modes Using the SmartMedia™ card* increases
photo capacity
1. 6M Pro-Still (Pixel Shift Mode) (੬ pg. 46)
This unit is compatible with SmartMedia™ cards*
(optional), which can be used to increase the
number of pictures that can be taken.
* “SmartMedia™ card” (which is described as
“Memory card” in this instruction manual) is a
trademark of Toshiba Corporation.
This mode collects twice as much image data by
using two exposures (with the CCD shifted one
pixel for the second exposure), resulting in an
image consisting of 6 million pixels, or twice as
many in normal mode.
Before taking important photos
2. DR Pro-Still (Wide Range Mode) (੬ pg. 47)
● When you need to take an important photo,
always take a test photo first and confirm that the
camera is operating normally.
This mode uses two exposures, one with the
exposure adjusted for the dark portions of the
image, and one with the exposure adjusted for the
bright portions of the image. By using the image
data from both exposures, it is possible to achieve a
wide dynamic range that was previously impossible.
This mode avoids pictures where part of the image
is blacked out or whited out, which occurs easily
with conventional digital cameras.
● Memory card is not installed when this unit is
purchased. Be sure to install a Memory card
before taking photos.
● Before shooting, always confirm how much
memory is remaining from the memory card.
● We cannot bear any responsibility for an inability
to shoot, record, or playback material normally in
the event of a problem with a digital video
camera, Memory card, etc.
3. NR Pro-Still (Noise Reduction Mode) (੬ pg. 48)
This mode uses several exposures to collect a large
amount of image information, then extracts the
signal components and eliminates the noise
components. This mode eliminates electronic noise,
which occurs easily with conventional digital
cameras.
● Store backups of important photos on a personal
computer, etc. We cannot bear any responsibility
for pictures stored in memory that are lost or
altered.
Copyrights
Video Shooting
You may only use material that you photograph or
record with this digital camera for your own
personal use, and not in any way that infringes on
the copyrights of a third party. (Note that some
performances and exhibits have restrictions against
photography, even if only for your personal use.)
This feature is useful, if you want to send a short
video by e-mail.
Collage shooting
This feature allows you to combine a subject with a
previously photographed background with a simple
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
8
EN
SAFETY PRECAUTIONS
QUICK START
2
4
MAJOR FEATURES
7
CONTENTS
8
CONTROLS, CONNECTORS AND INDICATORS
GETTING STARTED
10
18
Charging the Battery ..................................................................................................... 18
Installing a Charged Battery .......................................................................................... 19
Connecting the Camera to a Power Outlet .................................................................... 20
Attaching the Hand strap .............................................................................................. 21
Attaching the Lens Cover .............................................................................................. 21
Inserting the Memory Card ........................................................................................... 22
Formatting a Memory Card ........................................................................................... 23
BASIC OPERATION
24
Viewfinder .................................................................................................................... 24
Shutter Button ............................................................................................................... 24
Good Photography Posture ........................................................................................... 25
Mounting the Camera on a Tripod ................................................................................ 25
Selecting the Shooting Mode ........................................................................................ 26
Zoom Shooting ............................................................................................................. 27
Selecting the Picture Size .............................................................................................. 28
Selecting the Picture Quality......................................................................................... 29
Full Auto Shooting ........................................................................................................ 30
Playing Back Still Pictures ............................................................................................. 31
Self Timer ..................................................................................................................... 32
Flash Shooting .............................................................................................................. 33
MANUAL SHOOTING
34
Manual Focus ............................................................................................................... 34
Iris Setting ..................................................................................................................... 35
Macro Shooting ............................................................................................................ 36
Exposure Control .......................................................................................................... 37
White Balance Adjustment............................................................................................ 38
Manual White Balance Adjustment ............................................................................... 39
Sensitivity Setting .......................................................................................................... 40
Changing the Zoom Power While Shooting .................................................................. 41
Shooting Continuous Photos ......................................................................................... 42
Changing the AE/AF Area .............................................................................................. 43
Restoring the Default Settings ....................................................................................... 44
Collage Mode ............................................................................................................... 45
6M Pro-Still (Pixel Shift Mode) ...................................................................................... 46
DR Pro-Still (Wide Range Mode) ................................................................................... 47
NR Pro-Still (Noise Reduction Mode) ............................................................................ 48
Video Shooting ............................................................................................................. 49
PLAYBACK
50
Video Playback ............................................................................................................. 50
Display Mode during Playback ..................................................................................... 51
Brightness Adjustment of LCD Screen ........................................................................... 51
Protecting Pictures ........................................................................................................ 52
Deleting Pictures .......................................................................................................... 53
Adding Special Effects................................................................................................... 54
Inputting the Date ......................................................................................................... 56
Inputting the Calendar .................................................................................................. 57
Connecting the Camera to a TV .................................................................................... 58
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
PRINT
59
Connecting the Camera to a Printer .............................................................................. 59
Printing a Picture .......................................................................................................... 60
Printing by DPOF Setting .............................................................................................. 62
SUBSIDIARY SETTINGS
64
Changing Settings in the SET UP Menu ......................................................................... 64
Setting the Date and Time ............................................................................................. 66
SOFTWARE SECTION FOR Windows®
SOFTWARE SECTION FOR Macintosh®
TROUBLESHOOTING
SPECIFICATIONS
67
75
82
86
88
90
CAUTIONS
INDEX
PROVIDED ACCESSORIES
AC power adapter/
charger (AA-V37)
Battery BN-V37
DC cable
USB cable
Video cable
Lens cover
CD-ROM
Memory card (3.3V type)
Hand strap
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS, CONNECTORS AND INDICATORS
10
EN
Front View
1 2 3
4
Top View
1 2 3
4
5
6 7 8
9
0 !
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
11
Front View
Top View
1 Flash............................................ ੬ pg. 33
Use the flash when shooting in dark
conditions.
1 Exposure control button (+/–) ..... ੬ pg. 37
Press this button to check the brightness
setting and to change the brightness setting
for shooting photos.
2 Flash sensor
2 FOCUS button ............................ ੬ pg. 34
Press this button to check the current focus
mode or to change the focus mode.
This sensor is needed for adjusting the
brightness when using the flash.
3 Self timer lamp............................ ੬ pg. 32
3 Iris button ................................... ੬ pg. 35
Press this button to check the current iris
mode or to change the iris mode.
Blinks when the self timer is running.
4 Zoom lens ................................... ੬ pg. 30
Point the lens towards the subject when
taking a picture. Because the lens is
extremely vulnerable to damage from
physical impacts, handle it very carefully.
Striking or dropping the lens can damage
the lens.
4 LCD panel ................................... ੬ pg. 14
Indicates the current mode through text
and symbols.
5 Shutter button ............................. ੬ pg. 24
This button has two modes: press it half
way to focus on the subject; press it all of
the way to shoot a photo.
6 Flash button ................................ ੬ pg. 33
Press this button to change the flash mode.
7 Self timer button ......................... ੬ pg. 32
Press this button to change the time setting
for the self timer.
8 Macro button .............................. ੬ pg. 36
Press this button to set macro mode.
9 Directional button (r t w e) ..... ੬ pg. 23
Press this button to make various settings
and selections.
0 ZOOM lever ......................... ੬ pg. 27, 51
Use this for zoom shooting and to adjust
the brightness of the LCD screen.
! MODE switch........................ ੬ pg. 31, 36
Use this switch to change shooting and
playback modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS, CONNECTORS AND INDICATORS (cont.)
12
EN
Rear View
1
2
3
4
5
6 7 8
9
0
Bottom View
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
Rear View
Bottom View
1 Viewfinder
1 Battery cover .............................. ੬ pg. 19
Look through here when framing and
focusing your shot.
2 DISPLAY button .................... ੬ pg. 31, 38
Open this cover to replace the battery.
2 Tripod mount hole ...................... ੬ pg. 25
Use this hole to mount the camera on a
tripod. Use a tripod that does not have a
rotation stopper.
Press this button to turn the LCD screen on
and off, and to select the menu display in
camera mode and the index display in
playback mode.
3 Memory card cover..................... ੬ pg. 22
Open this cover to install/remove a
Memory card.
3 EXE (execute) button............. ੬ pg. 23, 50
This button is used to finalize selections on
each menu, and also serves as a video
playback button.
Connectors
4 Lock button ................................. ੬ pg. 23
Hold down this button in order to turn the
Power dial.
5 Power dial ................................... ੬ pg. 23
Hold down the Lock button and turn this
dial to turn the power on and off and to
change the mode of the camera.
1
PR
IN
T
E
R
2
3
4
6 Shoot standby lamp (green) ........ ੬ pg. 30
The camera is ready to shoot a photo when
this lamp changes from flashing to steadily
on.
7 Connectors cover
Pull the cover to open.
Refer to the “Connectors” on the right.
8 Flash standby lamp (red) ............. ੬ pg. 33
The flash is ready when this lamp changes
from flashing to steadily on.
1 VIDEO output connector ............ ੬ pg. 58
This is to connect to view picture on a TV.
9 LCD screen ................................. ੬ pg. 15
The photo subject/playback picture is
displayed on this screen.
2 PRINTER output connector ......... ੬ pg. 59
This is to connect an optional printer (GV-
SP2) to the camera via an optional cable.
0 Hand strap/lens cover mount...... ੬ pg. 21
This is used to attach the hand strap or a
lens cover.
3 DIGITAL output connector ... ੬ pg. 68, 76
This is to connect the camera to a personal
computer.
4 DC input connector .................... ੬ pg. 20
Power from the provided AC adapter (AA-
V37) is input here through a DC cord.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS, CONNECTORS AND INDICATORS (cont.)
LCD Panel
14
EN
1
2
3
4 5 6
7
1 Indicator of initial settings having been
changed
This indicator is displayed if the initial
settings have been changed.
2 Mode display
5 Timer mode indicator ................. ੬ pg. 32
This indicator is displayed if the Self timer
button has been pressed and the timer
mode has been set to either “1 second” or
“8 seconds”.
6 Macro mode indicator ................ ੬ pg. 36
This indicator is displayed if the macro
button has been pressed and the macro
mode has been turned on.
Displays the current mode.
3 Remaining battery power
indicator
This bar graph gives a rough indication of
how much battery power is remaining.
7 Remaining photos counter
This indicates how many photos can still
be taken.
4 Flash indicator ............................੬ pg. 33
This indicator is displayed if the flash
button has been pressed and a mode that
generates a flash (auto, forced on, or red-
eye prevention) has been set.
Power Dial and Mode Display
The mode display appears on the LCD panel and screen, when the Power dial is set to certain position.
Refer to the chart below for each mode. Press the DSP button to display the image, when the Power dial is
set to “A”, “M” or “V”. Hold the Lock button down while turning the Power dial.
Power dial position
LCD panel
SET UP
On-screen display
Displays the SET UP menu
Displays the playback image
—
Page
16
SET
B
STILL PB
—
31
OFF
A
—
CAM AUTO
MANUAL
VIDEO
Displays the image
Displays the image
Displays the image
30
M
34
V
49
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
15
On-screen Display
During Shooting
During Playback
1
2
3
1
2
3
EXE
AT
2 0 0 0 . 1 2 . 2 4
4
5
4
5 6
During Shooting
During Playback
1 Flash indicator
....................... ੬ pg. 33
1 Picture size indicator .................. ੬ pg. 28
Appears when the flash button has been
pressed and a mode that generates a flash
(auto, forced on, or red-eye prevention) has
been set.
: 640 x 480
: 1024 x 768
: 2032 x 1536
2 Picture quality indicator ............. ੬ pg. 29
: standard quality
2 Macro mode indicator ............ ੬ pg. 36
Appears when the macro button has been
pressed and the macro mode has been
turned on.
3 Indicator of initial settings having been
changed
: fine quality
: uncompressed quality
3 Image position indicator
Indicates the current position of the
displayed image in the memory.
Appears when the initial settings have been
changed. When the EXE button is pressed,
the changed settings are displayed.
4
indicator ................................. ੬ pg. 62
Appears for a picture for which DPOF was
set.
4 Timer mode indicator ............. ੬ pg. 32
5
6
indicator .................................. ੬ pg. 53
Appears for a picture selected for deletion.
indicator ................................. ੬ pg. 52
Appears for a protected picture.
Appears when the Self timer button has
been pressed and the timer mode has been
set to either “1 second” or “8 seconds”.
5 Date display ................................ ੬ pg. 66
Depending on the setting, there are three
different types of date displays: Year/
Month/Day, Month/Day/Year, and Day/
Month/Year.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS, CONNECTORS AND INDICATORS (cont.)
Menu Screens
16
EN
SET UP Menu Screen
Turn the Power dial to “SET” to display the SET UP screen.
Refer to the following pages for a detailed description of
operation.
੬ pg. 28
SET UP
FRAME
2032X1536
FINE
HIGH
ON
EXE
EXE
੬ pg. 29
੬ pg. 65
੬ pg. 65
੬ pg. 23
੬ pg. 66
QUALITY
BEEP VOL.
Q. REVIEW
FORMAT
DATE/TIME
CAMERA SETTING Menu Screen
Turn the Power dial to “M”, then press the DSP button until the CAMERA SETTING screen appears.
To turn off the menu screen, press the DSP button.
Refer to the following pages for a detailed description of
operation.
CAMERA SETTING
੬ pg. 38
੬ pg. 40
੬ pg. 41
੬ pg. 42
੬ pg. 43
੬ pg. 44
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AE/AF
AUTO
80
1X
OFF
MULTI
EXE
CLEAR
CAMERA SETTING Confirmaton Screen
Turn the Power dial to “M”, then press the DSP button to turn on the LCD screen and hold down the EXE
button. The CAMERA SETTING confirmation screen is displayed while the EXE button is held down. The
confirmation screen will not appear when the LCD screen is turned on without on-screen display.
Iris (੬ pg. 35)
Shutter speed
F2.8/3.8
2.4m/8ft
1/750
+0.5
(automatic setting)
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AE/AF
AUTO
80
1X
OFF
MULTI
Focus (੬ pg. 34)
Exposure (੬ pg. 37)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
Playback Menu Screens
Turn the Power dial to “B” (playback), and then select each mode with the MODE switch.
The selected mode appears on the LCD screen.
STILL PLAYBACK
STILL PROTECT
STILL DELETE
1 0 0 - 0 0 0 3
STILL PROTECT
STILL DELETE
THIS PIC.
ALL
SELECT
EXE
EXE
EXE
THIS PIC.
ALL
SELECT
EXE
EXE
EXE
2 0 0 0 . 1 2 . 2 4
(੬ pg. 31)
(੬ pg. 52)
(੬ pg. 53)
VIDEO PLAY
VIDEO PROTECT
VIDEO DELETE
VIDEO PROTECT
VIDEO DELETE
THIS PIC.
ALL
SELECT
EXE
EXE
EXE
THIS PIC.
ALL
SELECT
EXE
EXE
EXE
(੬ pg. 50)
(੬ pg. 52)
(੬ pg. 53)
USB MODE
EDIT
DPOF SET
EDIT
DPOF SET UP
No displays
NEW/RESET
REVISE
FOR ALL
EXE
EXE
EXE
EFFECT
DATE
NEXT
OFF
OFF
EXE
EXE
RETURN
(੬ pg. 71, 78)
(੬ pg. 54)
(੬ pg. 62)
NOTE:
● It is not possible to change the settings on the
menu screen when the item's letters appear gray.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
18
EN
Charging the Battery
Charge the battery with the AC adapter (provided).
Battery BN-V37
Power outlet
Power cord
Remove the battery.
Power lamp
AC adapter
(AA-V37)
Charging lamp
Finish lamp
NOTES:
Connect the AC adapter's power cord to a
power outlet.
● Approximate charging time is 90 minutes for one
battery (BN-V37). (at a temperature from 10°C to
35°C)
1
•The “Power” lamp lights.
● Charging is not possible if the DC cord is
connected to the AC adapter.
● The battery is no longer usable, if the shooting
time is short with the battery fully charged.
Replace the battery with new one.
Install the battery.
2 •The “Charging” lamp lights.
•Charging is complete when the “Charging”
lamp turns off and the “Finish” lamp lights.
● The Power dial can be turned to “ON” acciden-
tally, when you put the camera in a bag, etc.
If the camera is left turned on, the battery will be
used up and you will not be able to shoot a
photo. It is recommended to remove the battery
from the camera when you carry the camera.
Remove the battery.
3
Approximate number of pictures that can be taken
with a fully charged battery (BN-V37)
Maximum number:
50 pictures
(when shooting every 30 seconds at normal
temperature, with the flash, zooming, auto focus
and the LCD screen turned on)
NOTE:
● Depending on the settings of the flash, zooming,
etc., the number of pictures that can be taken may
decrease.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
Installing a Charged Battery
The battery (provided) is not charged when the camera is purchased. Be sure to charge the battery with the
AC adapter before using the camera.
Slide the battery cover slightly to open.
1
Insert a charged battery, making sure that it is
2 oriented correctly.
Close the battery cover and slide it back.
3
Removing the Battery
Slide the battery cover slightly to open.
1
Remove the battery.
2
Battery cover
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (cont.)
20
EN
Connecting the Camera to a Power Outlet
The AC adapter (provided) is useful when shooting photos indoors for an extended period of time. The
adapter can also be used overseas if you use a conversion plug.
Power cord
Power outlet
Power lamp
AC adapter
(AA-V37)
DC input connector
DC cord
NOTES:
Open the connector cover on the rear of the
camera.
● Make sure to use the provided AC adapter (AA-
V37).
1
2
Connect the DC cord to the DC input
connector.
● Do not attempt to use an AC adapter for a video
camera or other electronic device with this
camera. Differences in voltage levels can damage
the camera.
● Use the AC adapter in order to safely format
Memory cards, delete pictures or send pictures to
a connected personal computer.
Connect the DC cord to the DC input
3 connector on the AC adapter.
Connect the power cord to a power outlet.
4 •The power lamp lights.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
Attaching the Hand strap
Attaching the Lens Cover
Pass one end of the strap through the
1 mounting hole on the lens cover.
Pass the other end through the loop.
2
Attach the strap of the lens cover to the hand
Pass one end of the hand strap through the
3 strap.
1 mounting hole.
Pass the other end through the loop.
2
NOTES:
● Do not turn on the camera when the lens cover is
attached. Doing so could result in the damage to
the lens part.
● Make sure to attache the lens cover when the
camera is not in use.
● Make sure to use the optional lens cleaning paper
to clean fingerprints from the lens surface, and to
clean the lens after shooting with the camera in
warm, humid locations (by the seaside, in the
mountains, etc.). Store the camera in a well-
ventilated location with little dust or debris.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (cont.)
22
EN
Inserting the Memory Card
Make sure to turn the Power dial to “OFF”, when
inserting a Memory card. Memory card is not
loaded in the camera, when purchasing the camera.
Open the Memory card cover.
1 •Slide the knob and then pull the cover.
Insert the Memory card.
2 •Insert the card so that the contact surface is
facing up and the notch on the card is on the
right.
•Do not touch the contact surface on the card.
Close the Memory card cover.
Contact surface
3 •Slide the knob to lock the cover.
NOTES:
● There are two types of Memory cards (the 3.3V
type which is indicated by a notch on the right
side, and the 5V type which is indicated by a
notch on the left side). This camera uses only
Memory cards (3.3V) with a notch on the right
side.
● The maximum memory card capacity that can be
used with this camera is 64MB.
● To avoid damage to the Memory card, do not
drop or strike the Memory card against hard
objects.
Where the write protect
sticker is placed
● To protect the entire content of the Memory card
after shooting, peel and stick a write protect
sticker as shown in the right.
3.3V
5V
Removing the Memory Card
Open the Memory card cover.
1 •Slide the knob and then pull the cover.
Remove the Memory card.
2 •Push on the card to remove it.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
Formatting a Memory Card
If your Memory card has not been formatted, it must be formatted before it can be used. When a Memory
card is formatted, all pictures in the card will be lost.
Lock button
EXE button
r t button
Power dial
SET
FORMAT
SET UP
FRAME
2032X1536
FINE
HIGH
ON
QUALITY
BEEP VOL.
Q. REVIEW
FORMAT
YES
NO
EXE
EXE
EXE
DATE/TIME
EXE
Make sure to use the provided AC adapter (AA-
V37) to power the camera, when formatting a
Memory card. (੬ pg. 20)
Press the r t button to select “YES“.
4
Press the EXE button.
When the message “FORMAT MEMORY
5 •“NOW FORMATTING“ appears.
1 CARD” appears, turn the Power dial to “SET”.
•Do not turn off the power or perform any
other operations while formatting is in
progress.
•Hold the Lock button down while turning the
Power dial.
•The SET UP screen appears.
•The formatting starts, and the contents of
memory are erased. When formatting is
completed, the SET UP screen appears.
Press the r t button to select “FORMAT“.
2
Press the EXE button.
3 •The FORMAT screen appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Shutter Button
24
EN
Viewfinder
This camera is equipped with an optical viewfinder.
Not pressed
Half-press
Normal Shooting
To focus, point the camera so that the subject
appears within the finder, and then press the shutter
button.
Full-press
Macro Shooting
When shooting close-up, make sure
the subject being photographed is
within the frame inside the finder
(indicated with diagonal lines).
NOTES:
The camera’s Shutter button is a two-step button.
Pressing it halfway (to the first step) causes the
photo standby lamp (green) to flash while the
camera focuses automatically.
Once the camera is focused, the photo standby
lamp (green) lights steadily. Pressing the Shutter
button halfway (to the first step) is called a “half-
press.“ Pressing the button from the half-press
position to the full-press position causes the camera
to take a picture.
● In close-up (macro) shooting, the area that is
actually photographed will be slightly below the
area that can be seen in the viewfinder. The closer
the camera is the subject, the greater that this
displacement is.
● It is recommended to view the subject with the
LCD screen for an important shooting.
NOTES:
● Suddenly pressing the Shutter button with your
finger or pressing too strongly can result in a
picture that is at an angle or which is blurry.
Press the button smoothly from the half-press
position to the full-press position when taking
pictures.
● If you have pressed the Shutter button halfway
and then release it, the camera will perform the
autofocus operation again the next time that you
press the Shutter button halfway.
● If you press the Shutter button all the way instead
of halfway, a picture can be taken after focusing
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
Good Photography Posture
With your left hand firmly supporting the camera to
the left of and below the lens, support the camera
body with your right hand.
Use your left hand to hold
the camera also.
Next, look for your subject and determine the
camera position.
You can change the angle of the subject and the
background by changing the direction in which you
point the camera.
Hold your arms firmly
against your body.
You then frame the shot by using the zoom
function, etc., to enlarge or reduce the subject to
the desired size within the shot.
Spread your legs apart
slightly and adopt a firm
stance.
Mounting the Camera on a Tripod
Align the screw hole on the bottom of the
1 camera with the screw on the tripod.
Turn the screw on the tripod to secure the
2 camera in place.
•Adjust the screw and the length of the legs so
that the camera does not wobble at all.
Stud
NOTE:
● Use only tripods not equipped with a stud that
prevents the camera from rotating.
Using a Tripod
We recommend use of a tripod in the circumstances described below in order to avoid problems caused by
shaky hands.
We especially recommend the use of a tripod when using pixel shift mode, wide range mode, or noise
reduction mode.
• Low shots
Because it is difficult to assume a steady posture for a low shot, the shot will frequently be on a slant or
blurred by shaky hands.
• Dark locations
When shooting in a location that prohibits the use of a flash (such as in a museum), the shutter speed is
reduced, which increases the likelihood of problems caused by shaky hands.
• Shooting a distant object through the telephoto feature
Because the telephoto feature makes a small, distant space appear larger, even the slightest movement of
the camera can cause blurring.
• Shooting an extreme closeup
Because a nearby object appears very large when shot in a closeup, the slightest movement in your body
or hand can result in a blurred image.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION (cont.)
26
EN
Selecting the Shooting Mode
The Power dial is used to switch among three shooting modes: “A”, “M” and “V”.
Lock button
LCD panel
C A M A U T O
Power dial
Mode display
A: CAM AUTO
M: MANUAL
V: VIDEO
Turn the Power dial to one of the following modes,
depending on your needs:
Select the shooting mode with the Power dial.
1 •Hold the Lock button down while turning the
Power dial.
“A”: To shoot photos in full auto mode
In this mode, the camera automatically sets
the brightness, the shutter speed, the focus,
and the white balance.
“M”: To shoot photos in manual mode
In this mode, you can set the brightness, the
shutter speed, the focus, and the white
balance manually.
“V”: To shoot video
You can shoot up to 20 seconds of video
with a screen size of 160 x 120. This feature
is useful if you want to send a short video
by e-mail.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
Zoom Shooting
The camera incorporates a 2.3X zooming function that corresponds to a 37 mm to 86 mm lens of a 35 mm
camera. Zooming allows you to shoot wide areas, as well as close-ups of subjects located far away, without
changing the shooting position. Turn the Power dial to “A”, “M” or “V” when shooting with the zoom
function.
ZOOM lever
T
W
Set ZOOM lever to “W” (wide angle).
Set ZOOM lever to “T” (telephoto).
You can shoot a wider angle.
You can shoot a distant subject in closeup.
NOTE:
● With this camera, you can set the “AF”
(autofocus)/”AE” (auto exposure) sensor point to
either “SPOT” or “MULTI“. Switch to “SPOT” if
the camera focuses on the background when you
zoom in for a closeup. (੬ pg. 43)
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION (cont.)
28
EN
Selecting the Picture Size
There are three picture sizes, starting with the highest resolution:
2032 x 1536 (QXGA)
1024 x 768 (XGA)
640 x 480 (VGA)
Select the resolution that best fits your needs.
2,3
1,4
SET UP
FRAME
2032X1536
FINE
HIGH
ON
QUALITY
BEEP VOL.
Q. REVIEW
FORMAT
SET
EXE
DATE/TIME
EXE
Approximate number of pictures that can be stored
(when using 8MB/16MB Memory card):
Turn the Power dial to “SET”.
1 •Hold the Lock button down while turning the
Power dial.
FRAME
QUALITY
8MB
16MB
•The SET UP screen appears.
NO COMP.
FINE
–
1
16
20
6
Press the r t button to select “FRAME”.
2032 x 1536
8
2
STANDARD
NO COMP.
FINE
10
3
Press the w e button to select either 2032 x
3 1536, 1024 x 768, or 640 x 480.
1024 x 768
640 x 480
32
43
8
64
86
16
130
174
•The frame size is set.
STANDARD
NO COMP.
FINE
•Turn the Power dial for shooting or other
operations.
65
87
Turn the Power dial to “A” or “M” for
STANDARD
4 shooting.
NOTE:
● The number of pictures that can be stored varies
depending on the shooting condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
29
Selecting the Picture Quality
You can select the picture quality according to the purpose for which you want to use the picture.
There are three levels of picture quality, starting from the highest quality:
NO COMP. (uncompressed)
FINE (fine)
STANDARD (standard)
2,3
1,4
SET UP
FRAME
2032X1536
FINE
HIGH
ON
QUALITY
BEEP VOL.
Q. REVIEW
FORMAT
SET
EXE
DATE/TIME
EXE
NOTE:
Turn the Power dial to “SET”.
● The number of pictures that can be stored will
vary according to the images that are shot, the
conditions under which the camera was used, the
temperature when used, and the batteries that
were used.
1 •Hold the Lock button down while turning the
Power dial.
•The SET UP screen appears.
Press the r t button to select “QUALITY”.
2
Press the w e button to select either “FINE”,
3 “STANDARD”, or “NO COMP.” mode.
•The new picture quality mode is set.
•Turn the Power dial for shooting or other
operations.
Turn the Power dial to “A” or “M” for
shooting.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION (cont.)
30
EN
Full Auto Shooting
This mode allows you to take photos with little effort, since the camera automatically adjusts the focus, the
shutter speed, the brightness and the white balance.
Lock button
Shutter button
Power dial
4
Shoot standby
lamp (green)
NOTES:
Turn the Power dial to “A”.
● The image on the LCD screen becomes still while
1 •Hold the Lock button down while turning
the shoot standby lamp (green) flashes.
● It takes a little while to store the picture in the
Memory card.
Point the lens at the subject and half-press the
2 Shutter button.
the Power dial.
•The camera turns on in full auto mode.
•Look through the finder.
•The camera will automatically focus on the
subject while the shutter button is half-
pressed.
•The shoot standby lamp (green) flashes.
Once focus is attained, the lamp changes
from flashing to on.
•To display the image on the LCD screen
while shooting, press the DSP button.
Press the Shutter button all the way to take
3
the picture.
•The picture image is stored in the Memory
card.
•The shoot standby lamp (green) goes off
when the recording has finished.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
Playing Back Still Pictures
Each picture that you shoot is numbered and saved.
You can then view these saved pictures in sequence, one by one.
3
4 2
1
4
Normal Playback
Auto Playback
Turn the Power dial to “B”.
Turn the Power dial to “B”.
1 •Hold the Lock button down while turning the 1 •Hold the Lock button down while turning the
Power dial.
Power dial.
Select “STILL PB” with the MODE switch.
Select “STILL PB” with the MODE switch.
2 •“STILL PB” appears on the LCD panel.
2 •“STILL PB” appears on the LCD panel.
Press the DSP button to select the display
Press the DSP button to select the display
3 mode.
3 mode.
Press the w e button to select the picture that
Press and hold the w e button for more than 2
4 you wish to view.
4 seconds.
“e”: Displays pictures in order.
NOTES:
“w”: Displays pictures in reverse order.
● To change the display mode during playback,
press the DSP button.
Press the w e button again to stop Auto
5 Playback.
Press the DSP button repeatedly to cycle through
the following modes:
• Full size screen (with on-screen display)
• Full size screen (without on-screen display)
• 6 indexed picture screen
● Playback is not possible if the picture has been
processed by a personal computer, other models
of camera, etc. or the picture size is other than
2032 x 1536, 1024 x 768 or 640 x 480.
● It takes a little while to display the photographed
image on the LCD screen if a lot of images are
recorded on the Memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION (cont.)
32
EN
Self Timer
The self timer clicks the shutter automatically after either 1 second or 8 seconds after the timer has been set.
Use the self timer to take your own picture, or if you are worried that you will shake the camera too much
when you press the Shutter button. Turn the Power dial to “A”, “M” or “V” when using the Self timer.
Self timer button
Self timer lamp
Shutter button
NOTES:
Press the Self timer button and set the time.
● When there is less than three seconds remaining
1 •Press the Self timer button repeatedly to cycle
until the shutter clicks for 8 seconds self timer, the
self timer lamp will begin to flash rapidly.
● To cancel the self timer before it runs out, press
the Self timer button again.
● Focusing occurs when the Shutter button is half-
pressed.
through the following settings:
Off → 8 seconds → 1 second → Off
•The “ ” (8 seconds) or “1 ” (1 second)
mark appears on the LCD panel.
Point the lens at the subject and half-press the
2 Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
•To display the image on the LCD screen
while shooting, press the DSP button.
Press the Shutter button all the way to take
3 the picture.
•The self timer lamp and the “ ” on the LCD
panel will begin to flash.
The shutter will click after either 1 second or
8 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
Flash Shooting
There are four flash modes:
Auto
: This setting automatically flashes when shooting under dark conditions.
: Select this setting to force the flash.
Forced on
Red-eye prevention
: Select this setting to minimize the “red-eye” effect that occurs when using the
flash. The flash is forced to light.
Off
: Select this setting to disable the flash even when shooting under dark conditions.
Note that in order to prevent blurry photos a tripod should be used with this
setting, since the shutter speed is slower.
2
3,4
1
Turn the Power dial to “A” or “M”.
Point the lens at the subject and half-press the
1 •Hold the Lock button down while turning the 3 Shutter button.
Power dial.
Press the Flash button and select the flash
Press the Shutter button all the way to take
the picture.
4
2 mode.
•The flash lights and the flash standby lamp
(red) begins flashing.
•In red-eye prevention mode, the flash lights
twice. The first flash is designed to reduce the
red-eye effect. The second flash is when the
picture is actually taken.
•The “
panel.
” indicator appears on the LCD
•Press the Flash button repeatedly to cycle
through the following modes:
“Off” → “
(auto)” → “ (forced on)”
→ “ (red-eye prevention)” → “Off”
NOTES:
•If the mode is set to any mode other than
“Off”, charging starts and the flash standby
lamp (red) flashes. When the flash standby
lamp remains lit steadily, charging is
complete.
● Though the image on the LCD screen may appear
dark, there is no problem with the recorded
image.
● When the flash is turned on, the iris value is set to
F2.8/3.8 automatically.
● When shooting with the flash, it is not possible to
set the iris and exposure manually.
● Do not press the Shutter button while the flash is
being charged.
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING
34
EN
Manual Focus
You can focus to the subject manually.
2
3,4
1
M
Turn the Power dial to “M”.
Point the lens at the subject and half-press the
Shutter button.
1 •Hold the Lock button down while turning the
3
Power dial.
•To display the image on the LCD screen
while shooting, press the DSP button.
Press the FOCUS button, and then press the w
2 e button within two seconds.
Press the Shutter button all the way to take
4 the picture.
•Press the w e button repeatedly to cycle
through the following modes:
NOTES:
AF-S (Auto Focus-Single):
When the Shutter button is half-pressed,
focus is automaticaly set once.
Focus manually in the following circumstances:
● When shooting a low-contrast subject, such as a
flat wall or a blue sky.
MF (Manual Focus):
● When there is an obstacle such as a wire fence
between a subject and the camera.
● When shooting a subject that has a very fine
pattern, or a perfectly regular pattern.
● When shooting a subject under flickering
illumination, including fluorescent light, or when
dark.
You can focus to the subject manually.
Press the r t button to focus.
Press the r button to lengthen the focal
distance.
Press the t button to reduce the focal
distance.
2.4m/8ft:
Sets the focus to this distance.
∞:
Sets the focus to infinity.
AF-C (Auto Focus-Continuous):
While the Shutter button is half-pressed, the
camera will continue to focus on the subject
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
35
Iris Setting
You can adjust the depth of field and the shutter speed by setting the F value manually.
2
3,4
1
M
Turn the Power dial to “M”.
Point the lens at the subject and half-press the
1 •Hold the Lock button down while turning the 3 Shutter button.
Power dial.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
•To display the image on the LCD screen
while shooting, press the DSP button.
Press the Iris button, and then press the w e
2 button within two seconds.
•Press the w e button repeatedly to cycle
through the following modes:
Press the Shutter button all the way to take
PROGRAM → F2.8/3.8 → F5.6 → F8 → F11
4 the picture.
→ PROGRAM
•The F value is the iris value, which controls
the amount of light that reaches the camera’s
image sensor.
NOTE:
● When shooting a night scene, select “ ” for
“W. BALANCE”. (੬ pg. 38)
•Smaller the F value is, faster the shutter speed
becomes. Larger the F value is, slower the
shutter speed becomes.
•Larger the F value is, deeper the depth of
field becomes.
•In PROGRAM mode, the iris value and the
shutter speed are calculated and set auto-
matically by the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING (cont.)
36
EN
Macro Shooting
Use Macro mode to shoot a subject at a distance of 2 to 50 cm. This mode is appropriate for a close-up shot
of insects and plants outdoor.
2
4,5
3
1
M
4
Turn the Power dial to “A”, “M” or “V”.
Point the lens at the subject and half-press the
Shutter button.
1 •Hold the Lock button down while turning the
4
Power dial.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
Press the Macro button.
2 •“
” is displayed on the LCD panel.
•The zooming is set to the widest angle
automatically.
Press the Shutter button all the way to take
5 the picture.
•The subject is displayed on the LCD screen.
•To turn off the Macro mode, press the Macro
button again.
Use the ZOOM lever to adjust the size of the
3 subject.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
37
Exposure Control
If the subject is predominantly white, black, red, etc., the resulting picture may be underexposed (too dark).
In such a case, it is necessary to use the exposure control to restore the picture to a more realistic image.
With this camera, you can make this adjustment by up to +/–2 iris steps in units of 0.5EV (exposure value).
2
3,4
1
M
(–2EV)
(+2EV)
Turn the Power dial to “M”or “V”.
Point the lens at the subject and half-press the
1 •Hold the Lock button down while turning the 3 Shutter button.
•The camera will continue to focus on the
Power dial.
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
•To display the image on the LCD screen
while shooting, press the DSP button.
Press the Exposure control button (+/–), and
2 then press the w e button within 3 seconds.
•Press the e button to cycle through the
following modes:
Press the Shutter button all the way to take
–2 → –1.5 → –1.0 → –0.5 → 0 → +0.5 →
4 the picture.
+1.0 → +1.5 → +2.0
(Darker to brighter)
•Press the w button to cycle through the
modes in the opposite direction.
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING (cont.)
38
EN
White Balance Adjustment
The white balance adjustment needs to be made when a picture is greenish, or when there is blue or red
ghosting around an image. If there are no problems with the colors in a picture, select “AUTO”.
3,6
4,5
2
1
CAMERA SETTING
W. BALANCE
SENS.
AUTO
80
TELEPHOTO
M. DRIVE
AE/AF
1X
M
OFF
MULTI
EXE
CLEAR
Turn the Power dial to “M”.
Press the DSP button to turn off the menu
1 •Hold the Lock button down while turning the 6 screen.
Power dial.
NOTES:
Select “MANUAL” with the MODE switch.
● When shooting a night scene with “ ” mode,
focus to the subject manually. It may not be able
to attain focus in the auto focus mode.
2 •“MANUAL” appears on the LCD panel.
Press the DSP button until the CAMERA
● If the shooting location is changed, for example
from indoors to outdooors, it may take a little
while for the white balance adjustment.
3
4
SETTING screen appears.
Press the r t button to select “W. BALANCE”
.
Press the w e button to select from among
5 “AUTO”, “
”, “ ”, “ ”, “MWB” or “ ”.
•Select the preset that produces the best color
for the subject that you wish to photograph.
AUTO: Adjusts the white balance automati-
cally.
:
Select this option when shooting
outside on a sunny day.
Select this option when shooting
outside on a cloudy day.
:
:
Select this option when shooting
with video lights, etc.
MWB: Select this opotion to photograph a
subject with a white balance that was
preset for that subject. (੬ pg. 39)
Select this opotion when shooting a
night scene. The shutter speed is
automatically set to 1/750 seconds to
1 second.
:
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
39
Manual White Balance Adjustment
If you cannot achieve natural looking colors even after selecting the preset options (“ ”, “ ”, “ ”, “
or “AUTO”) for the white balance adjustment, follow the procedure described below to adjust the white
balance manually.
”
4
3
CAMERA SETTING
W. BALANCE
SENS.
MWB
80
TELEPHOTO
M. DRIVE
AE/AF
1X
OFF
MULTI
EXE
CLEAR
NOTE:
Select “MWB“ in step 5 on page 38.
● The color balance that you set is retained in
memory until you set a different white balance
under the “MWB” setting.
1
Place a white sheet of paper about 30cm in
2 front of the lens.
•The white paper should fill the screen.
Hold down the EXE button until the shoot
3 standby lamp (green) starts flashing.
•The setting is completed when the shoot
standby lamp (green) has stopped flashing.
•To redo the setting, simply hold down the
EXE button again.
Press the DSP button to turn off the menu
4 screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING (cont.)
40
EN
Sensitivity Setting
You can change the camera's sensitivity setting when shooting at dark place or where you can not use the
flash.
3,6
4,5
2
1
CAMERA SETTING
W. BALANCE
SENS.
AUTO
80
TELEPHOTO
M. DRIVE
AE/AF
1X
M
OFF
MULTI
EXE
CLEAR
NOTES:
Turn the Power dial to “M”.
● The sensitivity settings are ISO compliant.
● The noise may appear and increase on the LCD
screen at the shooting if the sensitivity setting has
changed.
1 •Hold the Lock button down while turning the
Power dial.
Select “MANUAL” with the MODE switch.
2 •“MANUAL” appears on the LCD panel.
Press the DSP button until the CAMERA
3 SETTING screen appears.
Press the r t button to select “SENS.”.
4
Press the w e button to select “80”, “160” or
5 “320”.
Press the DSP button to turn off the menu
screen.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
41
Changing the Zoom Power While Shooting
Depending on the image size, it is possible to enlarge a subject without sacrificing the current image quality.
Because the zoom power cannot be changed in some instances if the image is large, reduce the image size
(੬ pg. 28) before changing the zoom power.
3,6
4,5
7,8
1
CAMERA SETTING
W. BALANCE
SENS.
AUTO
80
TELEPHOTO
M. DRIVE
AE/AF
2X
M
OFF
MULTI
EXE
CLEAR
2
Turn the Power dial to “M”.
Press the DSP button to turn off the menu
1 •Hold the Lock button down while turning the 6 screen.
Power dial.
Point the lens at the subject and half-press the
7 Shutter button.
Select “MANUAL” with the MODE switch.
2 •“MANUAL” appears on the LCD panel.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
Press the DSP button until the CAMERA
3
4
SETTING screen appears.
Press the Shutter button all the way to take
8 the picture.
Press the r t button to select “TELEPHOTO”
.
Press the w e button to select “2X” or “3.2X”.
5 •The zoom powers that can be selected
depend on the image size.
2032 x 1536: 1X
1024 x 768: 1X/2X
640 x 480: 1X/2X/3.2X
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING (cont.)
42
EN
Shooting Continuous Photos
With this mode you can shoot 2 continuous photos.
3,6
7,8
2
4,5
1
CAMERA SETTING
W. BALANCE
SENS.
AUTO
80
TELEPHOTO
M. DRIVE
AE/AF
1X
ON
MULTI
EXE
M
CLEAR
Turn the Power dial to “M”.
Point the lens at the subject and half-press the
1 •Hold the Lock button down while turning the 7 Shutter button.
Power dial.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
•To display the image on the LCD screen
while shooting, press the DSP button.
Select “MANUAL” with the MODE switch.
2 •“MANUAL” appears on the LCD panel.
Press the DSP button until the CAMERA
Press the Shutter button all the way for over
3 SETTING screen appears.
8 1 second to take the picture.
Press the r t button to select “M. DRIVE”.
•If the flash is set, it will only flash for the first
photo.
4
5
6
Press the w e button to select “ON”.
NOTES:
● It is not possible to shoot continuous photos if the
uncompressed picture quality is selected.
● The picture appears dark when shooting at dark
location inside a room, etc.
Press the DSP button to turn off the menu
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
43
Changing the AE/AF Area
Normally, in this camera this setting is “MULTI” in order to prevent the subject from being out of focus while
the background is in focus. If the camera does not focus on the point that you want it to, change this setting
to “SPOT”.
3,6
4,5
2
1
CAMERA SETTING
W. BALANCE
SENS.
AUTO
80
TELEPHOTO
M. DRIVE
AE/AF
1X
M
OFF
SPOT
EXE
V
CLEAR
NOTE:
Turn the Power dial to “M”.
MULTI: A precise exposure setting is made by
dividing the scene into several sections and
then measuring the light in each section.
SPOT: The exposure is set by measuring the light
in a small spot in the center of the scene.
Use this mode when you want to shoot a
subject with a large difference between
dark and bright area, such as someone on a
skihill, or someone standing in a spotlight
in a darkened theater.
1 •Hold the Lock button down while turning the
Power dial.
Select “MANUAL” with the MODE switch.
2 •“MANUAL” appears on the LCD panel.
Press the DSP button until the CAMERA
3 SETTING screen appears.
Press the r t button to select “AE/AF”.
4
● If “SPOT” is selected for shooting, press the DSP
button until “ ” appears on the LCD screen.
Press the w e button to select “SPOT”.
5
Press the DSP button to turn off the menu
6 screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING (cont.)
44
EN
Restoring the Default Settings
Perform the procedures described below to return the camera settings to the default settings.
The settings on the SET UP screen does not return to the default settings.
3,6
5
2
4
1
CAMERA SETTING
W. BALANCE
SENS.
AUTO
80
TELEPHOTO
M. DRIVE
AE/AF
1X
M
OFF
MULTI
EXE
CLEAR
Press the EXE button.
Turn the Power dial to “M”.
5 •The camera settings return to the default
1 •Hold the Lock button down while turning the
settings.
Power dial.
Press the DSP button to turn off the menu
Select “MANUAL” with the MODE switch.
6 screen.
2 •“MANUAL” appears on the LCD panel.
Press the DSP button until the CAMERA
3 SETTING screen appears.
Press the r t button to select “CLEAR”
.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
45
Collage Mode
This camera is able to combine images. For example, you can combine an existing picture (as background)
with a picture of a person standing in front of a white wall, etc.
5
3,4
2
1
M
COLLAGE
Background
Subject
Composed image
Turn the Power dial to “M”.
Point the lens at the subject, and then press
1 •Hold the Lock button down while turning the 4 the w e button to adjust the level of composi-
tion .
Power dial.
•The subject should be located in front of a
white background such as a white wall.
•You can also use the zoom function.
Select “COLLAGE” with the MODE switch.
2 •“COLLAGE” appears on the LCD panel.
•The 3 indexed photos that have been taken
previously are displayed on the LCD screen.
Press the Shutter button all the way to take
5 the picture.
Press the w e button to select a background,
•The composed image is stored in the
Memory card.
3 and then press the EXE button.
•The frame size is automatically selected for
the background.
NOTES:
•You can select the frame size (2032 x 1536,
1024 x 768 or 640 x 480) for a background.
•To change the backgrounds, press the EXE
button agian.
•It is not possible to use the collage function
with pictures photographed by other models
of camera.
● Due to large memory files created when shooting
a picture of uncompressed quality in this mode, it
is recommended to use a Memory card with the
capacity more than 16MB.
● If any portion of the subject is white (clothing, for
example), that portion of the subject will also be
replaced with the background picture.
● If the subject is dark, the region that is combined
with the background may appear to change when
the Shutter button is pressed. However, the actual
image that is recorded conforms with the
composition settings that were in effect before the
Shutter button was pressed.
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING (cont.)
46
EN
6M Pro-Still (Pixel Shift Mode)
The camera can achieve double its normal resolution by taking two pictures consecutively, shifting the
CCD pixels one pixel row in the vertical direction between the two shots.
This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky
hands.
4,5
3
2
1
M
V
Turn the Power dial to “M”.
Point the lens at the subject and half-press the
1 •Hold the Lock button down while turning the 4 Shutter button.
Power dial.
•To display the image on the LCD screen
while shooting, press the DSP button.
Select “6M PRO S” with the MODE switch.
2 •“6M PRO S” appears on the LCD panel.
Press the Shutter button all the way to take
5 the picture.
Confirm that the self timer is set to “1 second“.
•The shoot standby lamp (green) goes off
when the shooting has finished.
3
NOTES:
● The picture size is automatically set to 2032 x
1536 with this mode.
● Due to large memory files created when shooting
a picture of uncompressed quality in this mode, it
is recommended to use a Memory card with the
capacity more than 16MB.
● It takes a few seconds until the shooting finishes
because this mode uses the exposure twice. Do
not move the object and the camera until the
shooting finishes completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
47
DR Pro-Still (Wide Range Mode)
The camera can expand its apparent dynamic range by combining different exposures of an extremely high
contrast subject.
This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky
hands.
4,5
2
3
1
M
Turn the Power dial to “M”.
Point the lens at the subject and half-press the
1 •Hold the Lock button down while turning the 4 Shutter button.
Power dial.
•To display the image on the LCD screen
while shooting, press the DSP button.
Select “DR PRO S” with the MODE switch.
2 •“DR PRO S” appears on the LCD panel.
Press the Shutter button all the way to take
5 the picture.
Confirm that the self timer is set to “1 second“.
•The shoot standby lamp (green) goes off
when the shooting has finished.
3
NOTES:
● Due to large memory files created when shooting
a picture of uncompressed quality in this mode, it
is recommended to use a Memory card with the
capacity more than 16MB.
● It takes a few seconds until the shooting finishes
because this mode uses the exposure twice. Do
not move the object and the camera until the
shooting finishes completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUAL SHOOTING (cont.)
48
EN
NR Pro-Still (Noise Reduction Mode)
This mode reduces electronic noise in a photograph by layering several copies of the same image. This
mode is ideal for shooting works of art in dark surroundings.
This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky
hands.
4,5
3
2
1
M
Point the lens at the subject and half-press the
Turn the Power dial to “M”.
4 Shutter button.
1 •Hold the Lock button down while turning the
•To display the image on the LCD screen
while shooting, press the DSP button.
Power dial.
Select “NR PRO S” with the MODE switch.
2 •“NR PRO S” appears on the LCD panel.
Press the Shutter button all the way to take
5 the picture.
Confirm that the self timer is set to “1 second“.
•The shoot standby lamp (green) goes off
when the shooting has finished.
3
NOTES:
● Due to large memory files created when shooting
a picture of uncompressed quality in this mode, it
is recommended to use a Memory card with the
capacity more than 16MB.
● It takes a few seconds until the shooting finishes
because this mode uses the exposure 8 times. Do
not move the object and the camera until the
shooting finishes completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
49
Video Shooting
The camera can record a maximum of 20 seconds of video. The size of the recorded video file is approxi-
mately 200 KB. This feature is useful if you want to send a short video by e-mail.
2,3
1
V
NOTES:
Turn the Power dial to “V”.
● It is not possible to record the sound when
1 •Hold the Lock button down while turning the
shooting video.
● It is not possible to use the flash for video
shooting.
● It will take for a while to store a video file on a
Memory card.
Power dial.
•“VIDEO” appears on the LCD panel.
•To display the image on the LCD screen
while shooting, press the DSP button.
● You can change the settings of “Manual Focus”
(੬ pg. 34), “Iris Setting” (੬ pg. 35), “Exposure
Control” (੬ pg. 37), “Macro Shooting” (੬ pg. 36)
and “Self Timer” (੬ pg. 32).
● You can change the settings of “White Balance
Adjustment” (੬ pg. 38), “Sensitivity Setting”
(੬ pg. 40), “Changing the AE/AF Area” (੬ pg. 43)
and “Restoring the Default Settings” (੬ pg. 44).
Press the Shutter button all the way to shoot
2 the video.
•The flash standby lamp (red) lights during the
video shooting.
•Video shooting will stop automatically after
about 20 seconds.
Press the Shutter button again to stop the
3 video shooting before 20 seconds are up.
•While the video file is stored in the Memory
card, the flash standby lamp (red) flashes,
and then goes off when the recording has
finished. Do not operate the camera while
the light flashes.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
50
EN
Video Playback
You can watch the recorded video on the camera's LCD screen.
4,5
3
2
4
1
VIDEO PLAY
4
Turn the Power dial to “B”.
Press the EXE button to start playback.
1 •Hold the Lock button down while turning the 5 •Playback of the video starts.
Power dial.
•To stop playback, press the EXE button again.
•To select and play back another video, press
the DSP button while playback is in stop
mode. The indexed display will appear.
Select “VIDEO PB” with the MODE switch.
2 •“VIDEO PB” appears on the LCD panel.
•The first frame of the video (which has been
most recently recorded) appears on the LCD
screen.
NOTES:
● The camera may not be able to play back a video
recorded by other models of camera.
Press the DSP button to switch to an indexed
● The camera expands and plays back data that was
compressed and stored in a memory card. The
data format is our own proprietary format.
● The image may have a mosaic appearance.
● When playing back a video that is shorter than 2
seconds, the video is displayed as a still image.
This not a malfunction.
3 display.
Press the r t w e button to select the video,
4 and then press the EXE button.
•The still image of the selected video appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
51
Display Mode during Playback
To change the display mode during playback, press
the DSP button.
Image number
Press the DSP button repeatedly to cycle through
the following modes:
1 0 0 - 0 0 0 3
• Full size screen (with on-screen display)
• Full size screen (without on-screen display)
• 6 indexed picture screen
2 0 0 0 . 1 2 . 2 4
STILL PLAYBACK screen
Brightness Adjustment of LCD Screen
3
2
1
4
NOTE:
Turn the Power dial to “A”, “M”, “V” or
● The brightness setting does not influence the
image files which is to be recorded on the
Memory card.
1 “B”.
•Hold the Lock button down while turning the
Power dial.
Press the DSP button.
2
3
Hold down the EXE button and push up or
down the ZOOM lever.
•To make the LCD screen brighter, push the
ZOOM lever up.
•To make the LCD screen darker, push the
ZOOM lever down.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK (cont.)
52
EN
Protecting Pictures
You can set protection for important pictures and video files.
This features prevents you from accidentally deleting these important pictures and video files.
3,4
2
1,5
4
STILL PROTECT
STILL PROTECT
THIS PIC.
ALL
SELECT
EXE
EXE
EXE
EXE
EXE
ON/OFF
RETURN
Turn the Power dial to “B”.
To protect a selected picture
1 •Hold down the Lock button while turning the
Select “SELECT” in step 3 in the left column,
Power dial.
1 and then press the EXE button.
•The playback picture appears on the LCD
screen.
•The 6 indexed picture screen appears.
Select “STILL ” with the MODE switch.
Press the r t w e button to select the picture
2 that you wish to protect, and then press the
EXE button.
2 •The STILL PROTECT screen appears.
•To protect a video file, select “VIDEO ”.
The VIDEO PROTECT screen will appear.
•“ ” (protection indicator) appears.
To protect the picture that is currently
3 displayed, press the r t button to select
“THIS PIC.”, and then press the EXE button.
NOTES:
● Protected picture will be deleted if the Memory
card on which it is stored is reformatted.
● Important pictures that must be saved should be
transferred to a personal computer and stored
there.
•To protect all pictures, select “ALL”, and then
press the EXE button.
Press the r t button to select “ON/OFF”, and
4 then press the EXE button.
•“ ” (protection indicator) appears.
•To unlock the protection, press the EXE
button again.
Turn the Power dial to “A”, “M” or “V” for
5 shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
53
Deleting Pictures
There are three methods for deleting pictures: deleting the displayed picture, deleting all pictures, and
deleting a selected picture. Video files can be deleted in the same way.
2,5
3,4
1
4
STILL DELETE
STILL DELETE
THIS PIC.
ALL
SELECT
EXE
EXE
EXE
EXE
EXE
DELETE
RETURN
Turn the Power dial to “B”.
To delete a selected picture
1 •Hold down the Lock button while turning the
Select “SELECT” in step 3 in the left column,
Power dial.
1 and then press the EXE button.
•The playback picture appears on the LCD
screen.
•The 6 indexed picture screen appears.
Select “S-DELETE” with the MODE switch.
Press the r t w e button to select the picture
2 that you wish to delete, and then press the
EXE button.
2 •The STILL DELETE screen appears.
•To delete a video file, select “V-DELETE”.
The VIDEO DELETE screen will appear.
•“ ” (deletion indicator) appears.
To delete the picture that is currently
3 displayed, press the r t button to select
“THIS PIC.”, and then press the EXE button.
Press the r t button to select “END”, and
3 then press the EXE button.
Press the r t button to select “DELETE”, and
•To delete all pictures, select “ALL”, and then
press the EXE button. “ ” (deletion indicator)
appears.
4 then press the EXE button.
NOTES:
Press the r t button to select “END”, and
then press the EXE button.
● To delete the unnecessary picture which is
protected, unlock the protection (੬ pg. 52) and
delete the picture.
Press the r t button to select “DELETE”, and
● Do not remove the memory card or turn off the
power while the delete operation is in progress.
Doing so could result in malfunction or damage
to the equipment.
● Also, use the AC adapter provided when
performing the delete operation.
4 then press the EXE button.
Select “STILL PB” with the MODE switch, and
5 then confirm that the deletion has been
completed. (੬ pg. 31)
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK (cont.)
54
EN
Adding Special Effects
You can add digital special effects to playback pictures.
You can make pictures black and white or sepia tone, or you can use the camera as a simple film scanner.
3 4
2
1
4
EDIT
EDIT
EFFECT
DATE
NEXT
OFF
OFF
EXE
EXE
THIS PIC.
EXE
RETURN
Turn the Power dial to “B”.
To add special effects to the picture that is
1 •Hold the Lock button down while turning the 3 currently displayed, press the EXE button.
Power dial.
•To select a picture, press the DSP button.
In the 6 indexed screen, press the w e button
to select a picture, and then press the DSP
button.
Select “EDIT” with the MODE switch.
2 •The EDIT screen appears.
Press the r t button to select “EFFECT”.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
55
5–7
8
FILE
EDIT
NOW EDITING
PRINT
OVERWRITE
SAVE
EXE
EXE
EXE
EXE
EFFECT
DATE
NEXT
B/W
OFF
EXE
EXE
CANCEL
RETURN
Press the w e button to select “OFF”, “B/W”,
Press the r t button to select “OVERWRITE”
5 “SEPIA”, or “NEGA”.
7 or “SAVE”, and then press the EXE button.
•Press the w e button repeatedly to cycle
•It is not possible to overwrite the file when
the remaining memory of the Memory card is
not enough.
through the following modes:
OFF:
B/W:
No special effects.
Converts a picture from color to
black and white.
•You can also add date or calendar informa-
tion to a file. (੬ pg. 56, 57)
SEPIA: Gives a picture a sepia tone,
creating a retrospective look.
NEGA: Gives a picture a negative film
effect.
•You can print the file that you have added
special effects. (੬ pg. 60)
Select “STILL PB” with the MODE switch, and
8 then confirm that the file has been saved.
(੬ pg. 31)
Press the r t button to select “NEXT”, and
6 then press the EXE button.
•“NOW EDITING” appears, then FILE screen
will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK (cont.)
56
EN
Inputting the Date
You can display the date when playing back or printing pictures on the optional printer.
1–6 7
2 4 . 5 . 2 0 0 0
FILE
EDIT
DATE
PRINT
OVERWRITE
SAVE
EXE
EXE
EXE
EXE
EFFECT
DATE
NEXT
OFF
ON
EXE
DIRECTION
STYLE
END
DMY
EXE
EXE
CANCEL
RETURN
EXE
RETURN
Perform steps 1 – 3 on the page 54 before the
following procedures.
Press the r t button to select “STYLE”, and
4 then press the w e button to select “YMD”,
“MDY” or “DMY”.
Press the r t button to select “DATE”, and
1 then press the w e button to select “ON”.
Press the r t button to select “END”, and
5 then press the EXE button.
Press the r t button to select “NEXT”, and
2 then press the EXE button.
•“NOW EDITING” appears, then FILE screen
will appear.
•The DATE screen appears.
Press the r t button to select “OVERWRITE”
Press the r t button to select “DIRECTION”,
3 and then press the w e button to select the
direction of the picture.
6 or “SAVE”, and then press the EXE button.
•You can print the file that you have added
special effects. (੬ pg. 60)
•Press the w e button repeatedly to cycle
through ↑ (up), → (right), ↓ (down) or
← (left).
Select “STILL PB” with the MODE switch, and
7 then confirm that the file has been saved.
(੬ pg. 31)
•Select the up side of the picture.
↑ (up)
→ (right)
← (left)
↓ (down)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
57
Inputting the Calendar
You can display the calendar when playing back or printing pictures on the optional printer.
1–7
8
4
2000
SUN MON TUE WED THU FRI SAT
1
2
9
3
4
5
6
7
8
10 11 12 13 14 15
16 17 18 19 20 21 22
24 25 26 27 28 29
23
30
CALENDAR
FILE
EDIT
YEAR
2000
1
PRINT
OVERWRITE
SAVE
EXE
EXE
EXE
EXE
EFFECT
DATE
NEXT
OFF
CALENDAR
EXE
MONTH
DIRECTION
END
EXE
EXE
CANCEL
RETURN
EXE
RETURN
Perform steps 1 – 3 on the page 54 before the
following procedures.
Press the r t button to select “END”, and
6 then press the EXE button.
Press the r t button to select “DATE”, and
1 then press the w e button to select “CALEN-
DAR”.
•“NOW EDITING” appears, then FILE screen
will appear.
Press the r t button to select “OVERWRITE”
7 or “SAVE”, and then press the EXE button.
Press the r t button to select “NEXT”, and
2 then press the EXE button.
•You can print the file that you have added
special effects. (੬ pg. 60)
•The CALENDAR screen appears.
Press the r t button to select “YEAR”, and
Select “STILL PB” with the MODE switch, and
3 then press the w e button to select the year. 8 then confirm that the file has been saved.
(੬ pg. 31)
Press the r t button to select “MONTH”, and
4 then press the w e button to select the month.
NOTE:
● Even if a part of the calendar cannot be seen on
the LCD screen, the edited image is saved
normally.
Press the r t button to select “DIRECTION”,
5 and then press the w e button to select the
direction of the picture.
•Press the w e button repeatedly to cycle
through ↑ (up), → (right), ↓ (down) or
← (left).
•Select the up side of the picture. (Refer to the
illustration in step 3 on page 56)
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK (cont.)
58
EN
Connecting the Camera to a TV
You can view the photographed still pictures on TV.
TV
Digital Still Camera
VIDEO
To video output
connector
To video input
connector
Video cable
(provided)
Power cord
Power outlet
Power lamp
AC adapter
(AA-V37)
DC cord
NOTES:
● Refer to page 31 for operations of the camera.
● Refer to the TV's instruction manual for connec-
tions and operations of your TV.
● When viewing a still picture on TV, diagonal lines
may take on a jagged appearance.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT
EN
59
Connecting the Camera to a Printer
If you connect the camera to an optional printer (GV-SP2), you can easily print a picture taken by this
camera.
Printer
connector
Printer (GV-SP2)
Digital Still Camera
PRINTER
To input
connector
Optional printer
cable for GV-SP2
Power cord
Power outlet
Power lamp
AC adapter
(AA-V37)
DC cord
NOTES:
● Refer to the printer's instruction manual for
connections and operations of your printer.
● When connecting the printer cable, make sure to
confirm the shape of the plug.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT (cont.)
60
EN
Printing a Picture
If you have a JVC printer (GV-SP2), you can print a picture with (or without) a white frame. It is also possible
to print multiple copies of the same photo. You can also use stickers in combination with the function that
prints 16 thumbnail images to create your own photo stickers. Make sure to use the provided AC adapter
(AA-V37).
3
2
1
EDIT
4
THIS PIC.
EXE
Turn the Power dial to “B”.
To print the picture that is currently displayed,
1 •Hold the Lock button down while turning the 3 press the EXE button.
Power dial.
•To select a picture, press the DSP button.
In the 6 indexed screen, press the w e button
to select a picture, and then press the DSP
button.
Select “EDIT” with the MODE switch.
2 •“EDIT” appears on the LCD panel.
•You can print the pictures with special
effects, date or calendar. (੬ pg. 54 – 57)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
61
4–8
EDIT
PRINTER SET UP
FILE
EFFECT
DATE
NEXT
OFF
OFF
EXE
EXE
SHEET
FRAME
PRINT
1
PRINT
OVERWRITE
SAVE
EXE
EXE
EXE
EXE
OFF
EXE
EXE
RETURN
RETURN
CANCEL
Press the r t button to select “NEXT”, and
Press the r t button to select “PRINT”, and
4 then press the EXE button.
8 then press the EXE button.
•The FILE screen will appear.
•“NOW PRINTING” appears.
•Pressing the EXE button during printing
cancels the printing.
Press the r t button to select “PRINT”, and
5 then press the EXE button.
•After printing has finished, the FILE screen
appears.
•The PRINT SET UP screen appears.
Press the r t button to select “SHEETS”, and
6 then press the w e button to set the number
of copies.
NOTES:
● Printing takes longer if the picture size is set to
2032 x 1536.
•Maximum number of copies are 25.
● When printing with the calendar displayed,
“OFF” cannot be selected for “FRAME”.
● When printing with the date or the calendar
displayed, the characters may be difficult to see.
If this happens, we recommend setting the picture
size to 2032 x 1536. (੬ pg. 28)
Press the r t button to select “FRAME”, and
7 then press the w e button to select “OFF”,
“ON” or “MULTI 16”.
● If an “out of paper” or other error occurs in the
printer, correct the problem and then press the
EXE button again to resume printing.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT (cont.)
62
EN
Printing by DPOF Setting
If you have a JVC printer (GV-SP2), and have made the DPOF* setting for your photos, you can print your
photos in the following ways:
● You can print one copy of all pictures.
● You can set and print the different number of copies for each picture.
* “DPOF” stands for “Digital Print Order Format”. Data which has been written in a Memory card with the
DPOF setting conforms with this standard.
3
2
1
DPOF SET UP
NEW/RESET
REVISE
FOR ALL
EXE
EXE
EXE
4
Turn the Power dial to “B”.
Press the r t button to select one of the
1 •Hold the Lock button down while turning the 3 DPOF settings, and then press the EXE button.
Power dial.
NEW/RESET:
When there is no file that was set up
previously.
Select “DPOF” with the MODE switch.
2 •“DPOF SET” appears on the LCD panel.
REVISE:
•The DPOF SET UP screen appears on the
LCD screen.
When revising a file that was set up previ-
ously.
FOR ALL:
When setting the same number of copies on
the all pictures.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
63
4–6
DPOF PRINT
DPOF PRINT
PRINT TOTAL 123
DPOF SET UP
PRINT TOTAL 123
PRINT
CANCEL
EXE
EXE
FRAME OFF
FRAME ON
SAVE ONLY
CANCEL
EXE
EXE
EXE
EXE
0
1
0
Press the w e button to select a picture, and
Press the r t button to select “SAVE ONLY”,
4 press the r t button to enter the number of 6 and then press the EXE button.
copies, and then press the EXE button.
•The DPOF file is saved on the Memory card.
•The DPOF PRINT screen appears.
Press the r t button to select “FRAME OFF”
5 or “FRAME ON”, and then press the EXE
button.
•The printing starts as set in step 4.
•“NOW PRINTING” appears.
•Pressing the EXE button during printing
cancels the printing.
•The total number of copies that have been set
in step 4 is displayed.
•To return to step 3, select “CANCEL”.
•After printing has finished, the DPOF PRINT
screen appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS
64
EN
Changing Settings in the SET UP Menu
You can change the system settings according to your photography needs. For example, you can turn the
beep sound off, or you can change the frame size for better picture quality.
2,3
1
SET UP
FRAME
2032X1536
FINE
HIGH
ON
QUALITY
BEEP VOL.
Q. REVIEW
FORMAT
SET
EXE
DATE/TIME
EXE
Turn the Power dial to “SET”.
Press the w e button to change the setting.
1 •Hold the Lock button down while turning the 3 •To set the “FORMAT” (੬ pg. 23) or “DATE/
Power dial.
•The SET UP screen appears.
TIME” (੬ pg. 66), after selecting the item
press the EXE button.
Press the r t button to select an item.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
65
SET UP Menu
Item
Contents
FRAME
You can select the size of the picture to be recorded.
There are three settings:
2032 x 1536 (QXGA class)
1024 x 768 (XGA)
640 x 480 (VGA)
QUALITY
BEEP VOL.
Q. REVIEW
You can select the quality of the picture to be recorded.
There are three settings:
FINE:
The highest picture quality.
STANDARD:
NO COMP.:
The normal picture quality.
TIFF format data that is not compressed.
You can adjust the tone of the warning beep.
There are three settings:
HIGH:
LOW:
OFF:
The high tone.
The low tone.
No beeps.
ON/OFF: When “ON”, pictures that you take with the camera are dis-
played for about 2 seconds if the LCD screen is turned on.
FORMAT
EXE:
EXE:
Formats a Memory card. (੬ pg. 23)
DATE/TIME
Sets the camera’s internal clock. (੬ pg. 66)
NOTES:
● This camera has the power save function. The camera goes in the power save mode after 3 minutes of no
activity. Within 7 minutes after the camera enters the power save mode, power can be restored by pressing
any of the button on the camera.
● After 7 minutes has elapsed, the camera shuts off the power automatically. To turn the camera on again,
turn the Power dial to “OFF” first and then to “A”, “M”, “V” or “B”.
● To immediately view images that you have shot, set “Q. REVIEW” to “ON”.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBSIDIARY SETTINGS (cont.)
66
EN
Setting the Date and Time
This procedure sets the camera’s internal clock. Use this procedure to reset the time and date if you take the
camera overseas, or if the clock otherwise needs to be reset.
4
2–4
1
SET
SET UP
DATE/TIME
FRAME
QUALITY
BEEP VOL.
Q. REVIEW
FORMAT
2032X1536
FINE
HIGH
ON
EXE
EXE
YEAR
MONTH
DAY
HOUR
MINUTE
STYLE
END
2000
1
1
0
00
DMY
EXE
DATE/TIME
Turn the Power dial to “SET”.
Press the r t button to select “END”, and
1 •Hold the Lock button down while turning the 4 then press the EXE button.
Power dial.
•The SET UP screen returns.
•The SET UP screen appears.
NOTES:
Press the r t button to select “DATE/TIME”,
● The date and time that are set are stored in
memory powered by the backup battery. The
backup battery is recharged when the camera is
connected to a power source, such as the AC
adapter, for at least 24 hours.
2 and then press the EXE button.
•The DATE/TIME screen appears.
Press the r t button to select “YEAR”,
3 “MONTH”, “DAY”, “HOUR”, “MINUTE”, or
“STYLE”, and press the w e button to change
the settings.
● The clock will not function if the minutes are not
set.
● The date and time display are stored in memory
only as shooting information. The date and time
are not recorded in the image itself.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
67
SOFTWARE SECTION
You can find the latest information (in English)
on the provided software program at our World
Wide Web Server.
USB Driver (for Windows®/Macintosh®)
Video Player (for Windows®)
JVC Video Decoder (for Macintosh®)
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION FOR Windows®
68
EN
Operating Environment
USB Connection
The host computer that runs the Windows®
operating environment must satisfy the following
conditions.
USB Driver
1. Microsoft® Windows® 98/Windows® 98 Second
Edition, pre-installed
2. Available USB port
3. CD-ROM drive
USB cable
(provided)
DIGITAL
Video Player
1. CPU: Intel® Pentium® 200MHz class or higher
2. Microsoft® Windows® 95/Windows® 98
3. Display capability of 65,536 colors or more
4. CD-ROM drive
Digital output
connector
5. Minimum RAM requirement: 32MB
6. Minimum hard disk space requirement: 1MB
* The system requirements information is not a
guarantee that provided software applications will
work on all personal computers meeting those
requirements.
To USB
connector
* Microsoft®, Windows® are either registered
trademarks or trademarks of Microsoft corporation
in United States and/or other countries.
* Intel®, Pentium® are registered trademarks of Intel
corporation.
* Other trademarks are property of their respective
owners.
Windows® PC
* If you use Windows® 95 or a personal computer
which does not have a USB port, use an optional
flash path, conversion card adapter, etc. For
details on the operating environment of these
devices, contact the dealers or manufacturers.
NOTES:
● Additional information regarding setup and
information not contained in the instruction
manual can be found in the file readme.txt. Please
read this file before installing the accompanying
software.
● The sound is not included in the video file
recorded with this camera.
NOTES:
● Make sure to use the provided AC adapter (AA-
V37) to power the camera, when using camera
connected to a personal computer.
● When connecting the provided USB cable, make
sure to confirm the shape of the plug.
● When connecting the camera to a personal
computer via a USB cable, the personal computer
is sometimes unable to recognize the device that
is connected. Therefore, first turn both the camera
and the personal computer on, and then connect
the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
69
Installing the USB Driver
For details on the basic operation of Windows® 98, refer to the
instruction manual provided with your computer or Windows®
98.
Preparation
Start Windows® 98.
● If you are running other software, close that software. (Make
sure that there are no other application icons open on the
task bar.)
Turn the Power dial to “B”.
1 •Hold the Lock button down while turning the Power
dial.
Select “USB MODE” with the MODE switch.
2 •“USB MODE” appears on the LCD panel.
Connect the camera to the computer using the provided
3 USB cable. (੬ pg. 68)
•The “Add New Hardware Wizard” window will appear.
Load the provided CD-ROM to the CD-ROM drive.
4
Click the “Next” button.
5
Click the “Next” button.
6
Confirm that “CD-ROM drive” has been checked, then
7 click the “Next” button.
•When the loaded CD-ROM is not found, click “Browse”
button and select the provided CD-ROM.
Click the “Next” button.
8
Click the “Finish” button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION FOR Windows® (cont.)
70
EN
Installing the Video Player
For details on the basic operation of Windows® 98, refer to
the instruction manual provided with your computer or
Windows® 98.
Preparation
Start Windows® 98.
● If you are running other software, close that software. (Make
sure that there are no other application icons open on the
task bar.)
Load the provided CD-ROM to the CD-ROM drive.
1
2
Double click on the CD-ROM icon for the loaded CD-
ROM, then double click on the “Vplay” folder.
•The Vplay folder opens.
Double click on the “Vpw100e” icon.
Click the “Next” button.
Click the “Yes” button.
3
4
5
6
Click the “Next” button.
Restart the computer.
7 •Click the “Yes, I want to restart my computer now”, then
click the “Finish” button.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
71
Sending Image File to Computer
For details on the basic operation of Windows® 98, refer to the instruction manual provided with your
computer or Windows® 98.
Preparation
Start Windows® 98.
● Insert a Memory card in which there are files you want to send to a computer. (੬ pg. 22)
● It is recommended to protect the important files in advance. (੬ pg. 52)
2
1
4
NOTES:
Turn the Power dial to “B”.
● When a file is being accessed from a personal
computer, the flash standby lamp (red) will flash.
Never disconnect the USB cable while the flash
standby lamp (red) is flashing.
1 •Hold the Lock button down while turning the
Power dial.
Select “USB MODE” with the MODE switch.
● The personal computer is sometimes unable to
recognize the device that is connected via a USB
cable. Therefore, when the copy of files has been
finished, disconnect the USB cable and then
control the camera with the MODE switch, Power
dial, etc.
2 •“USB MODE” appears on the LCD panel.
Connect the camera to the computer using
3 the provided USB cable. (੬ pg. 68)
Double click on the “Removable Disk” in the
4 “My Computer“ window.
Double click on the “DCVI (video)” or “DCIM
5 (still picture)” folder.
Sending a video by e-mail
You can easily send the copied video file as an
attachment through your normal e-mail system.
Double click on the “100jvcgc” folder.
6
Copy the necessary files from “100jvcgc”
folder to the desktop of the computer.
NOTE:
7
● To open the video file which is sent by e-mail,
you need a Video Player to expand the com-
pressed file. You can also download the Video
Player at our website.
index-e.html)
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION FOR Windows® (cont.)
72
EN
Basic Playback
There are several different methods for playing back a video on
the Video Player, depending on how you load the file.
Preparation
Start Windows® 98.
● Send the video file that you want to play back to the
computer. (੬ pg. 71)
Click the “Start” button.
1 •The Start Menu bar appears.
Point the cursor to “Program”.
2
Point the cursor to “Video Player”.
3
Click the “Video Player”.
4 •The Video Player window opens.
Click the “Open” button, then select the video file.
5 •Select the file with the extension “.jmm”.
Click the “4” button.
6 •Playback of the video starts.
•The sound is not included in the video file recorded with
this camera.
•Do not change the volume setting. Doing so changes the
volume setting of your computer.
Time indicator
Open button
Title display
Video screen
Stop button
Volume
Play button
Pause button
Exit button
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
73
Easy Playback
You can start playback easily by double clicking on
the icon of a video file.
Preparation
Start Windows® 98.
● Send the video file that you want to play back to
the computer. (੬ pg. 71)
Double clicking on the icon of a video file.
1 •Select the file with the extension “.jmm”.
Playback starts automatically.
2 •To stop playback, click the “8” button, and
to pause, click the “9” button.
When the playback finishes, click the “Exit”
3 button.
•The Video Player window closes.
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION FOR Windows® (cont.)
74
EN
Uninstalling the Software
When you don't need to use the Video Player, uninstall the
program.
Preparation
Start Windows® 98.
● If you are running other software, close that software. (Make
sure that there are no other application icons open on the
task bar.)
Click the “Start” button.
1 •The Start Menu bar appears.
Point the cursor to “Settings”.
2
Click the “Control Panel”.
3
Double click on the “Add/Remove Programs”.
4
Click the “Video Player”, then click the “Add/Remove”
5 button.
Click the “Yes” button.
6
After confirming that the Video Player is removed, click
7 the “OK” button.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
75
SOFTWARE SECTION FOR Macintosh®
Operating Environment
USB Connection
The host computer that runs the Macintosh®
operating environment must satisfy the following
conditions.
USB Driver
1. USB-compatible computer (iMac™, iBook™,
Power Mac™ G3/G4, Power Book™ G3, etc.)
2. Mac OS 8.5.1/Mac OS 8.6/Mac OS 9.0
USB cable
(provided)
JVC Video Decoder
1. Power PC 603e/120MHz or faster
2. Mac OS 7.6.1 or later
DIGITAL
3. QuickTime 3.0 or later
4. Minimum RAM requirement: 32MB
5. Minimum hard disk space requirement: 1MB
Digital output
connector
* Macintosh® is a registered trademark of Apple
Computer.
* Other trademarks are property of their respective
owners.
* If you use Macintosh® which does not have a USB
port, use an optional flash path, conversion card
adapter, etc. For details on the operating environ-
ment of these devices, contact the dealers or
manufacturers.
To USB
connector
NOTES:
● Additional information regarding setup and
information not contained in the instruction
manual can be found in the file readme.txt. Please
read this file before installing the accompanying
software.
Macintosh®
● The sound is not included in the video file
recorded with this camera.
NOTES:
● Make sure to use the provided AC adapter (AA-
V37) to power the camera, when using camera
connected to a personal computer.
● When connecting the provided USB cable, make
sure to confirm the shape of the plug.
● When connecting the camera to a personal
computer via a USB cable, the personal computer
is sometimes unable to recognize the device that
is connected. Therefore, first turn both the camera
and the personal computer on, and then connect
the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION FOR Macintosh® (cont.)
76
EN
Installing the USB Driver
For details on the basic operation of Mac OS, refer
to the instruction manual provided with your
Macintosh® or Mac OS.
Preparation
Start Macintosh®.
● If you are running other software, close that
software.
Load the provided CD-ROM to the CD-ROM
1 drive.
Double click on the loaded CD-ROM icon.
2
Double click on “Driver” folder.
3
Drag the “JVC USB-Storage Driver” and “JVC
4 USB-Storage Shim (E)” icons to the “System
Folder”, then drop the icon there.
Click the “OK” button when the dialog box
5 appears.
Restart the computer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
77
Installing the JVC Video Decoder
For details on the basic operation of Mac OS, refer
to the instruction manual provided with your
Macintosh® or Mac OS.
Preparation
Start Macintosh®.
● If you are running other software, close that
software.
Load the provided CD-ROM to the CD-ROM
1 drive.
Double click on the loaded CD-ROM icon.
2
Drag the “JVC Video Decoder” icon to the
3 “System Folder”, then drop the icon there.
Click the “OK” button when the dialog box
4 appears.
Restart the computer.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION FOR Macintosh® (cont.)
78
EN
Sending Image File to Computer
For details on the basic operation of Mac OS, refer to the instruction manual provided with your Macintosh®
or Mac OS.
Preparation
Start Macintosh®.
● Insert a Memory card in which there are files you want to send to a computer. (੬ pg. 22)
● It is recommended to protect the important files in advance. (੬ pg. 52)
2
1
4
NOTES:
Turn the Power dial to “B”.
● When a file is being accessed from a personal
computer, the flash standby lamp (red) will flash.
Never disconnect the USB cable while the flash
standby lamp (red) is flashing.
1 •Hold the Lock button down while turning the
Power dial.
Select “USB MODE” with the MODE switch.
● The personal computer is sometimes unable to
recognize the device that is connected via a USB
cable. Therefore, when the copy of files has been
finished, disconnect the USB cable and then
control the camera with the MODE switch, Power
dial, etc.
2 •“USB MODE” appears on the LCD panel.
Connect the camera to the computer using
3 the provided USB cable. (੬ pg. 75)
•The “untitled” icon appears on the desktop of
the computer.
Double click on the “untitled” icon.
Sending a video by e-mail
4
You can easily send the copied video file as an
attachment through your normal e-mail system.
Double click on the “DCVI (video)” or “DCIM
5 (still picture)” folder.
NOTE:
Copy the necessary files from the “DCVI
6 (video)” or “DCIM (still picture)” folder to the
desktop of the computer.
● To open the video file which is sent by e-mail,
you need a JVC Video Decoder to expand the
compressed file. You can also download the JVC
Video Decoder at our website.
•To copy a file in easy way, hold down the
“option” key while dragging the file to the
destination.
index-e.html)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
79
Basic Playback
There are several different methods for playing back
a video on the QuickTime Player (or Movie Player),
depending on how you load the file.
Preparation
Start Macintosh®.
● Make sure that you installed the JVC Video
Decoder in advance. (੬ pg. 77)
● Send the video file that you want to play back to
the computer. (੬ pg. 78)
Double click on the “QuickTime Player” icon.
1 •The QuickTime Player is nomally provided
with Macintosh®.
Select “Open Movie” from the “File” menu.
2
Select the video file in the dialog box.
3 •Select the file with the extension “.jmm”.
Click the “Convert” button.
4
Click the “4” button.
5 •Playback of the video starts.
•The sound is not included in the video file
recorded with this camera.
•For details on the basic operation of
QuickTime Player (or Movie Player), refer to
the instruction manual provided with your
Macintosh® or visit the website of Apple
Computer.
Play button
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE SECTION FOR Macintosh® (cont.)
80
EN
Easy Playback
You can start playback easily by double clicking on
the icon of a video file.
Preparation
Start Macintosh®.
● Make sure that you installed the JVC Video
Decoder in advance. (੬ pg. 77)
● Send the video file that you want to play back to
the computer. (੬ pg. 78)
Double clicking on the icon of a video file.
1 •Select the file with the extension “.jmm”.
Select the “QuickTime Player” in the dialog
2 box, then click the “Open” button.
Click the “4” button.
3 •Playback of the video starts.
•For details on the basic operation of
QuickTime Player (or Movie Player), refer to
the instruction manual provided with your
Macintosh® or visit the website of Apple
Computer.
NOTE:
● Do not use PC Exchange to register “jmm” files.
In some cases it is not possible to play back a
“jmm” file that was copied from a DOS-formatted
floppy disk.
Play button
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
81
Uninstalling the Software
When you don't need to use the JVC Video
Decoder, uninstall the program.
Preparation
Start Macintosh®.
● If you are running other software, close that
software.
Double click the “System Folder” icon.
1 •The System Folder opens.
Double click the “Extensions” folder icon.
2 •The Extensions folder opens.
Drag the “JVC Video Decoder” icon to
3 “Trash”, then drop the icon there.
•If you want to delete the file completely,
empty the trash.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
This digital still camera contains a microprocessor. The operation of the microprocessor can be disrupted by
electronic noise or interference. If this happens, disconnect the power source (battery, AC adapter, etc.) from
the camera, and then resume using the camera. If this does not solve the problem, and taking the action
described below also does not solve the problem, contact your nearest JVC dealer.
82
EN
SYMPTOM
CORRECTIVE ACTION
PAGE
Power supply
The power does not come on.
● Make sure that the battery is fully charged.
● Make sure that the power supply is connected
correctly.
18
20
While shooting
Cannot shoot photos.
● Make sure that the Power dial is set to “A” or
“M”.
26
Cannot see the picture on the
screen.
● Try turning the power off and then back on again.
26
28
34
Cannot use the menu functions.
● Make sure that the Power dial is not set to “A”.
Half pressing the shutter button
does not focus the camera.
● Make sure that there is sufficient light, and make
sure that there is enough contrast in your subject.
When there is sunlight in the shot,
the screen temporarily darkens or
becomes black.
● This is not a malfunction.
—
The image on the LCD screen is
dark, or too white.
● Use the ZOOM lever to adjust the brightness of
the LCD screen.
● You may be playing back a picture in a cold
location. The LCD screen will appear slightly
darker when it is cold. This is not a malfunction.
● The LCD screen may be nearing the end of its
operational life. Contact your nearest JVC dealer.
51
Memory Full.
● The “MEMORY FULL” message appears when the
memory is full, making it impossible to take any
more pictures. Either use a Memory card that has
some free space in it, or create some free space in
memory by saving pictures to a personal
computer and then deleting those pictures from
the camera’s memory.
—
Color noise appears in contours of
the subject on the LCD screen.
● This is not a malfunction. There is no problem
with the recorded images.
—
—
The power turned off while
attempting flash photography.
● The power may turn off during flash photography,
even if the remaining battery power is indicated
to be at half of the battery capacity.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
83
SYMPTOM
CORRECTIVE ACTION
PAGE
Others
Cannot shoot photos even if the
remaining photos counter shows
number more than 0.
● The remaining photos counter indicates the
approximate number. It may not be able to shoot
a photo even if the counter shows number more
than 0, depending on the image size and quality.
28
—
—
The LCD screen is splotchy.
● Make sure that you are not pressing on the surface
of the LCD screen anywhere. Pressure on the
surface of the LCD screen can cause splotches in
the image. If you remove the pressure from the
LCD screen, it will return to normal after a while.
There are small bright or dark
points on the LCD screen.
● The LCD screen is manufactured using extremely
precise technology, and over 99.99% of the pixels
will be normal, but less than 0.01% will be either
always off or always on.
● The protect seal may be placed on the Memory
card. If the data on the Memory card has been
backed up on a personal computer, remove the
seal and format the card.
Cannot format a Memory card.
23
—
Colored bands appear at the top
and bottom of the screen when
displaying the sun or a bright light
source.
● This is not a malfunction. There is no problem
with the recorded images.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING (cont.)
84
EN
Error Messages (for the camera)
Error messages appear on the LCD screen.
Messages
Contents
Page
MEMORY FULL
The storage capacity of the Memory card has been reached. You
can store additional photos either by replacing the memory card
with a new one, or by deleting photos that are no longer needed.
22
66
SET DATE/TIME
The date has not yet been set. Set the date.
WRITE PROTECTION
The Memory card is write protected. Check the contents of the
card, and then either replace this memory card with a new one,
or remove the protect sticker.
22
—
NO VALID IMAGE
This message is displayed if the Power dial is set to “B”, when
there are no pictures stored in the Memory card.
NO MEMORY CARD
This message is displayed if no Memory card has been inserted.
Insert a Memory card. Otherwise, there are dust, finger prints,
etc. on the contact surface on the Memory card. Clean the
surface with a soft cloth.
22
FORMAT MEMORY CARD
This message is displayed if a Memory card that is not yet
formatted has been inserted. Format the memory card.
23
55
30
53
52
NOW EDITING
This message is displayed when editing processing is in progress.
NOW RECORDING
This message is displayed when picture data is being saved to a
Memory card.
NOW DELETING
PROTECTED
This message is displayed when picture data is being deleted.
This message is displayed when an attempt is made to delete the
picture that is currently being displayed, and which is protected.
NOW FORMATTING
This message is displayed while a Memory card is being
formatted.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
85
Error Messages (for the printer)
Error messages appear on the LCD screen. For details, refer to the printer's instruction manual.
Messages
Contents
CHECK INK CASSETTE
REPLACE INK CASSETTE
No ink cassette is loaded.
The ink cassette is used up.
INK ERROR
CHECK INK CASSETTE
This message is displayed when an ink-related error has occurred.
PRINT ERROR HAS
OCCURRED
PRINTING ABORTED
This message is displayed when an error has occurred and the sheet that
was being printed is ejected.
NO PAPER
This message is displayed when there is no paper in the paper tray.
PLEASE WAIT
This message is displayed until operation is cancelled, when the
temperature rises or cancellation is requested.
PRINTER IS NOT
CONNECTED
This message is displayed when an attempt is made to print while no
printer is connected.
PICTURE WITH NO FRAME
IS SELECTED
This message is displayed when “no frame” has been selected but the
paper that is loaded does not permit the “no frame” specification.
SELECT PICTURE WITH
FRAME
TRANSMISSION ERROR
SET PAPER TRAY
Communications error occurred between the camera and the printer.
The paper tray has not been inserted.
REPLACE BATTERY
The battery is low on power.
PRINTER:
SYSTEM ERROR
This message is displayed when printing cannot be performed.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
86
EN
Power source
: DC 5 V
Power consumption
: 4.0 W (when the LCD screen is off)
5.6 W (when the LCD screen is on)
Dimensions
Weight
: 101 (W) mm x 67 (H) mm x 59 (D) mm
(except protruding parts)
: Approx. 290 g
(without a Memory card and battery)
Operating temperature
Relative humidity
Storage temperature
LCD screen
: 0°C to 40°C
: 35% to 80%
: –20°C to 50°C
: 2.0 inch, polysilicon TFT (200,000 pixels)
: SmartMediaTM 3.3V (up to 64MB)
Storage media
CCD
: 3.34 million pixels (3.24 million valid pixels),
1/1.8" square pixels, primary color filter,
interlace scan CCD
Focal distance
: 7.5 mm to 17.5 mm
(equivalent to 37mm to 86 mm on a 35 mm still camera)
Lens
: 2.3X optical zoom lens
Video
: 160 pixels x 120 pixels, 20 seconds, JVC original format
Recording format
: Exif Ver. 2.1 (DCF compliant), TIFF (Uncompressed),
DPOF-compatible
Sensitivity
: 80/160/320 (ISO compliant)
: F2.8/3.8, 5.6, 8, 11
Iris value (F value)
Exposure control
Exposure compensation
Minimum subject distance
Light measurement system
Flash
: Program AE, iris priority AE
: +/–2EV (0.5EV steps)
: Approx. 2 cm to 50 cm (in Macro mode)
: Multi, spot
: Built-in,
Auto/red-eye prevention/forced/disabled
Recommended distance for flash : Approx. 2.5 m
Shutter speed
: Auto (Program AE: 1/8 seconds – 1/750 seconds,
Iris priority AE: 1/4 seconds – 1/750 seconds )
White balance
Focus
: Auto/Manual (
: Auto/Manual
,
,
, MWB,
)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
87
Self timer
: 1 second, 8 seconds
Photo quality
: 3 modes (STANDARD/FINE/NO COMP.)
Number of storable photos
(with an 8MB Memory card,
STANDARD/FINE/NO COMP.)
: 2032 x 1536: approx. 10/8/0
1024 x 768: approx. 43/32/3
640 x 480: approx. 87/65/8
Battery
: Lithium ion battery
Printer connector
VIDEO output connector
Digital output connector
: Output for optional printer
: Two-pole plug, 3.5 mm diameter (PAL)
: Mini-USB connector
AC Power Adapter/Charger AA-V37
Power requirement
: AC 120 V`, 60 Hz
U.S.A. and Canada
Other countries
Power consumption
Output
: AC 110 V – 240 V`, 50 Hz/60 Hz
: 23 W
Charge
: DC 3.6 V , 0.77 A
: DC 5.0 V , 1.5 A
Camera
: 0°C to 40°C [when charging: 10°C to 35°C]
: 68 (W) mm x 38 (H) mm x 110 (D) mm
: Approx. 230 g (without a DC cord)
Operating temperature
Dimensions
Weight
E. & O. E. Design and specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
88
EN
AC Power Adapter (Optional)
Main Unit
1. To prevent fire, electric shock or injury...
.... DO NOT use the AC power adapter with any
power source or voltage not supported.
.... DO NOT modify or disassemble the AC
power adapter. Never attempt to repair or
check it yourself, as this is very dangerous.
Consult your nearest JVC dealer for mainte-
nance on the AC power adapter.
1. For safety, DO NOT . . .
.... open the camera’s chassis.
.... disassemble or modify the unit.
.... allow inflammables, water or metallic objects
to enter the unit.
.... remove the batteries or disconnect the power
supply while the power is on.
2. Avoid using the unit . . .
.... in places subject to excessive humidity or
dust.
.... DO NOT connect any power cord other than
the one provided to the AC power adapter. If
the power cord's performance or design is
different, fire or electric shock may result.
.... first connect the power cord to the AC power
adapter. If the power cord is connected first
to an AC outlet, and the AC power adapter's
connector comes in contact with a metallic
object, a short-circuit will occur which may
result in fire or injury.
.... in places subject to soot or steam such as
near a cooking stove.
.... in places subject to excessive shock or
vibration.
.... near a television set.
.... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
2. To prevent fire, malfunction or electric
shock...
.... in places subject to extremely high (over
40°C) or extremely low (under 0°C) tempera-
tures.
.... DO NOT use any AC power adapter except
the one specified with this digital still
camera. If the AC adapter's performance or
design is different than what the digital
camera is designed for, fire, malfunction or
electric shocks may result. Before using,
thoroughly read the instructions of the digital
still camera and the AC power adapter.
3. DO NOT leave the unit . . .
.... in places of over 50°C.
.... in places where humidity is extremely low.
(below 35%) or extremely high (above 80%).
.... in direct sunlight.
.... in a closed car in summer.
.... near a heater.
3. To avoid malfunction...
4. To protect the unit, DO NOT . . .
.... allow it to become wet.
.... connect the power cord to the AC power
adapter securely. If the power cord is
disconnected during use of the camera,
shooting or playback may become impossi-
ble and the image data may become corrupt.
.... drop the unit or strike it against hard objects.
.... subject it to shock or excessive vibration
during transportation.
.... keep the lens directed at extremely bright
objects for long periods.
.... carry it by holding the lens. Be sure to hold
the main unit with both hands.
.... swing it excessively when using the hand
strap.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
89
Built-in Rechargeable Battery
About moisture condensation . . .
● You may have observed that pouring a cold
liquid into a glass will cause drops of water to
form on the glass’ outer surface. This same
phenomenon occurs on the lens of the
camera when it is moved from a cool place to
a warm place, after heating a cold room,
under extremely humid conditions or in a
place directly subjected to the cool air from
an air conditioner.
To store the date/time in memory, a rechargeable
battery is integrated in the camera. As long as the
camera is connected to an AC outlet using the AC
power adapter, or the batteries installed in the
camera continue to supply power to the camera, the
built-in battery is always charged. However, if the
camera is not used for approx. 3 months, the built-
in battery will become discharged and the date/time
stored in memory will be lost. When this occurs,
connect the camera to an AC outlet using the AC
power adapter for over 24 hours to charge the built-
in rechargeable battery. Before using the camera
again, set the date/time.
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
Note that it is possible to use the camera without
setting the date/time.
LCD Monitor
1. To prevent damage to the LCD monitor,
DO NOT . . .
.... push it strongly or apply any shocks.
.... place the camcorder with the LCD monitor
on the bottom.
2. To prolong service life . . .
.... avoid rubbing it with coarse cloth.
3. Be aware of the following phenomena for
LCD monitor use. These are not malfunc-
tions . . .
•While using the camera, the surface around the
LCD monitor and/or the back of the LCD monitor
may heat up.
•If you leave power on for a long time, the surface
around the LCD monitor becomes hot.
How To Handle A CD-ROM
•Take care not to soil or scratch the mirror surface
(opposite to the printed surface). Do not write
anything or put a sticker on either the front or
back surface. If the CD-ROM gets dirty, gently
wipe it with a soft cloth outward from the centre
hole using a circular motion.
•Do not use conventional disc cleaners or cleaning
spray.
•Do not bend the CD-ROM or touch its mirror
surface.
•Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
90
EN
A
P
Adding Special Effects ................................ 54
Attaching the Hand strap............................ 21
Attaching the Lens Cover ........................... 21
Pixel Shift Mode ......................................... 46
Playing Back Still Pictures .......................... 31
Power dial.................................................. 14
Printing a Picture........................................ 60
Printing by DPOF Setting ........................... 62
Protecting Pictures ..................................... 52
B
BEEP VOL. ................................................. 65
C
Q
CAMERA SETTING Menu Screen ............... 16
Changing the AE/AF Area ........................... 43
Charging the Battery................................... 18
Collage Mode ............................................ 45
Connecting the Camera to a Power
Outlet ........................................................ 20
Q. REVIEW ................................................ 65
S
Selecting the Picture Quality ...................... 29
Selecting the Picture Size ........................... 28
Selecting the Shooting Mode...................... 26
Self Timer................................................... 32
Sensitivity Setting ....................................... 40
SET UP Menu Screen ................................. 16
Setting the Date and Time .......................... 66
Shoot standby lamp.................................... 30
Shooting Continuous Photos ...................... 42
Shutter Button ............................................ 24
Software Section for Macintosh® ................ 75
Software Section for Windows® .................. 67
Connecting the Camera to a TV ................. 58
D
Deleting Pictures ........................................ 53
Display Mode during Playback .................. 51
E
Error Messages ........................................... 84
Exposure Control........................................ 37
F
U
Flash Shooting............................................ 33
Formatting a Memory Card ........................ 23
Full Auto Shooting ..................................... 30
USB Connection .................................. 68, 75
Using a Tripod............................................ 25
V
I
Video Playback .......................................... 50
Video Shooting .......................................... 49
Viewfinder ................................................. 24
Inputting the Calendar................................ 57
Iris Setting .................................................. 35
L
W
LCD Panel.................................................. 14
LCD screen ................................................ 15
White Balance Ajustment ........................... 38
Wide Range Mode ..................................... 47
M
Z
Manual Focus ............................................ 34
Memory card ............................................. 22
Zoom Shooting .......................................... 27
N
Noise Reduction Mode .............................. 48
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
VICTOR COMPANY OF JAPAN, LIMITED
0P4ri0n0teTdYiVn*JaIDp*anSW
EG/EK
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD.
|