JVC DVD VCR Combo HR XV1EU User Manual

DVD PLAYER

Hi-Fi VIDEO

CASSETTE

RECORDER

USER’S GUIDE

For model:

HR-XV1EU

DIGITAL VIDEO

LPT0715-001A

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Precautions

For ItaIy:

“It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in

the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95”

The STANDBY/ON

button does not completely shut off mains power from the unit, but switches operating

current on and off. “ ” shows electrical power standby and “ I ” shows ON.

Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-

speed video recorder.

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow

for ventilation (10 cm or more on both sides, on top and at the rear.)

When discarding batteries, environmental problems must be considered and the local rules or laws governing

the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the recorder, remote control or video

cassette.

1. DO NOT place the recorder ...

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2. DO NOT block the recorder’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get

out.)

3. DO NOT place heavy objects on the recorder or remote control.

4. DO NOT place anything which might spill on top of the recorder or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5. DO NOT expose the apparatus to dripping or splashing.

6. DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled

with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this

unit.

7. DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8. AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under

extremely humid conditions-just as water droplets form in the surface of a glass filled with cold liquid. Moisture

condensation on the head drum will cause damage to the tape. In conditions where condensation may occur,

keep the recorder turned on for a few hours to let the moisture dry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

Video Cassette Recorder

• Repeat/Scene Repeat

• On-Screen Display in 3

Languages

• High Quality (HQ) Images

• On-Screen Displays (OSD)

• Nicam Hi-Fi Stereo Audio

Recording and Playback

• ATS- Automatic Tuning System

• CATV Tuner with Hyperband

• 80 Memories for presets

• Auto Time Setting

• 30 Minutes Back-Up in case of

Power failure

• 6 rotary Heads (4 Video Heads

2 HiFi Audio Heads)

• Long play

• AV-Front input jacks

• 2 Scart sockets for Premiere

• CE Symbol guaranteeing

Compliance to Currently

Effective European Standards

DVD Player

• Digital Audio Jack (Coaxial)

• Multi-Language

• Multi-Angle

• Surround audio

• Repeat Playback

• Memory/Random Playback

• Zoom

• Video Aspect Ratio

• Parental Control

• VPS/PDC system

• Timer Recording of up to 8

Programs per Month

• S^HOWVIEW -rapid timer

programing

• 3 Scenes memory

• Instant Timer Recording (ITR)

• Video index Search System

• Slow Motion

• NTSC Video Cassette Tape

Playback on PAL TV

• Real-Time Tape Counter with

ZERO RETURN-Function

• Digital AUTO Tracking (ATR

Function)

• Digital (Optical or Coaxial) output

for Dolby Digital (AC-3) and DTS

• Playback of DVD, Video-CD and

Audio-CD

• PAL & NTSC DVDs playback

• A-B Repeat playback

• MP3 CD playback

* This product incorporates copyright protection technology that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use

of this copyright protection technology must be authorized by Macrovision Corporation or other rights owners

and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation or other rights owners. Reverse engineering or disassembly is prohibited.

* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of

* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

* Certain audio features of this product manufactured under license from Desper Products,Inc. Spatializer and

the circle - in - square device are trademarks owned by Desper Products,Inc.

* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may

infringe the rights of copyright owners and be contrary to copyright laws.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Before using your unit

Disc playback operation

Safety Precautions ...........................................2

Features ...........................................................4

Contents...........................................................5

Parts and functions ..........................................6

Display .............................................................7

Remote control.................................................8

Connections and Installation ..........................10

Playback connection ......................................11

DISC...............................................................40

Setting setup language ..................................41

Playback procedure........................................42

Special playback ............................................43

DVD Picture Signal Selection/Zooming ..........44

Repeat playback.............................................45

Memory playback/Random playback ............. 46

MP3 Playback ................................................47

Changing soundtrack language /

Setting up the VCR section

Setting the TV to the AV-Channel...................13

Setting the On-screen language ....................14

ATS Automatic Tuning System and

Auto Time /Date Setting .................................15

ATS.................................................................16

Setting the Time and Date..............................19

Manual TV station presetting..........................20

Changing Subtitles language .........................48

Changing angles / Title selection /

DVD menu ......................................................49

Advanced function of DVD section

Parental control ..............................................50

Setting menu language ..................................52

Setting audio soundtrack language ................53

Setting subtitle language................................54

Setting the aspect ratio of TV screen /

Tape playback operation

Loading and Unloading a Cassette Tape .......22

Cassette tape playback ..................................23

Special playback/Playback sharpness ...........24

Repeat Playback ............................................25

Counter Display..............................................26

Video Index Search System ...........................27

Setting on Screen display ..............................55

Setting Audio ..................................................56

Setting Operation ...........................................57

Selecting the sound enhancement (E.A.M.)/

Setting Background/Setting Screen Saver .....58

Setting initial setup/output sound

conversion table .............................................59

Status display of Disc .....................................60

Table of languages .........................................61

Recording

Recording a TV Program................................28

Instant Timer Recording (ITR) ........................30

ShowView^®-Recording ...................................31

Timer-Recording ............................................33

Additional information

Problems and troubleshooting ....................... 62

Video head cleaning....................................... 63

Specifications ................................................. 64

Advanced function of VCR section

Detailed Description of the VPS/

PDC Function.................................................35

NICAM/German A2 Stereo Recording

and Playback..................................................36

Audio Mixing...................................................38

Duplicating a Video Tape ................................39

Download from Www.Somanuals.com. All Manuals Search And Download.

Parts and functions

Front

VCR/DVD mode selector button

Cassette Loading Slot

PLAY button

OPEN/CLOSE button

EJECT button

STOP button

Disc tray

Display window

Remote sensor

POWER

button

DVD indicator

REC button

PR +/– buttons

REW (Rewind) button

AUDIO (L/R)/

VIDEO IN jacks

VCR indicator

FF (Fast Forward) button

Rear

AC power cord

SCART PRISE PERITEL

RF IN jack

RF OUT jack

DVD OPTICAL

DIGITAL AUDIO

OUT jack

DVD COAXIAL DIGITAL

AUDIO OUT jack

SCART-socket

(for VCR/DECODER)

DVD AUDIO (L/R) OUT jacks

DVD S-VIDEO OUT jack

SCART-socket

(for TV-RGB/Composite)

Download from Www.Somanuals.com. All Manuals Search And Download.

Display

Display window

No. Display

Description

VCR

VCR mode

Playback (lights) / Auto resume (flashes)

Still picture

DVD disc is inserted.

DVD

CD is inserted.

Clock display (colon[ : ] flashes)

10 : 00

01 : 00

Counter display by hour/minute at VCR/DVD / by minute/second at CD

Track number display for CD

TV channel position display

CH 2

A1/A2/A3

External input display

Timer recording display

Video tape is in the unit

Track display for CD

TRK

REC

Normal recording display (flashes during Instant Timer Recording - ITR

)

Note:

Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

Page

14,41

TV/VCR/DVD switch Switch to operate TV or VCR or DVD

Power on/off

Turn the connected TV on or off

DVD MENU

MEMORY

RETURN

OPEN/CLOSE

DISPLAY

A.TRK

SUB TITLE

C. RESET

ANGLE

Display menu of DVD software

Index for DVD

Remove DVD set up menu

Open or Close the tray

Change the front Display mode

Digital AUTO TRACKING

Set Subtitle of a DVD disc

Reset the counter to 00:00

Change playback angle of a DVD disc

ZERO RETURN Stop the tape when the counter reaches 00:00 26

(SP/LP)

PLAY MODE

ZOOM

Sets the tape speed for recording

Select playback mode

Zoom (for DVD playback)

Select title of a DVD disc

28,30,39

45,46

TITLE

REPEAT A-B

0-9

Repeat playback between A and B (DVD/CD) 45

Direct channel selection of TV

Input setting

28,30

15~18,31,33,46,47

Enter a password

Scart input or AV-Front input

S^HOWVIEW-Recording

34,39

AUX

PROG.

Confirmation of Timer-Recording

Set the unit to start recording at a preset time. 32,34

•

TV ∏ (INPUT) Switch the connected TV to external mode

TV/VCR

TV @ +/–

Switches between TV and VCR

Adjust the connected TV’s volume

Rewind/Review playback

Playback

23,24,43

23,42,47

Fast Forward/Forward search playback 23,24,43

Recording

Stop

28,30,39

23,42,47

Still picture/Recording pause on/off 24,28,39,43

SKIP 6/7

INDEX 6/7 Search for the INDEX mark of a tape

Skip chapter to forward or reverse direction

JVC TV Remote Control

TV/VCR PR +/– Select channel of the connected TV or VCR

This Remote can control some functions

8,28,30,39

(

, NUMBER (0-9), TV ∏, TV @ +/–,

C/D

SET –/+

Cursor buttons

Setting buttons

TV PR +/– and OK) of a remote controllable

JVC TV by slide TV/VCR/DVD switch to TV.

32~34

Manual tracking buttons in playback mode

Cursor buttons - To move Up in the VCR menu

you press the A. To move Down in the VCR

menu you press the B.

B/A

NOTE:

• It’s not possible to operate a unit not

equipped with a remote sensor.

• This Remote can control a JVC TV only.

• When you operate the VCR or DVD, the

TV/VCR/DVD switch must be slided to

VCR/DVD again. Otherwise the DVD/

VCR may not operate properly.

• Since this unit is combined type of DVD

and VCR, the remote code of DVD is

individual. So please note that the DVD-

keys on the RCU of the other JVC

RECEIVER/TV is not effective for this unit.

Enter information in the menu/Select option in the menu

SET UP MENU Display menu of setup

CANCEL

14~21,41,50~59

Delete Timer program

Cancel input data in the setting mode 18,21,46~50

Display VCR or DVD operation status 28~30,60

OSD

A.MONITOR

Switches sound

Change sound track language of DVD

Slowmotion playback

37,38

24,43

SLOW

SKIP SEARCH

Skip the unwanted short material of a tape

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

How to install the batteries

Use micro batteries type R6.

Open the battery compart-

ment cover in the direction of

the arrow.

Install two "AA" batteries (not

supplied), paying attention to the

polarity diagram in the battery

compartment.

Replace the compartment

cover.

Battery precautions

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.

Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from

possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

Distance of Remote

Control Operation

Effective angle:

approx. 60°

approx.

Point the remote

control directly at the

remote sensor.

Change the custom code for remote control

If you operate this DVD/VCR with another JVC’s VCR simultaneously arranging them side by side, the both

recorders will react to this remote control. In this case, you can change the remote control and DVD/VCR to

other frequency (“ ”). Then you can operate only this DVD/VCR with this changed remote control.

When you purchased, the DVD/VCR and remote control have been set to the frequency-“ ”.

Example: Change frequency to

Remote control:

DVD/VCR:

While holding VCR, press 2 (code: b) of Number keys.

(in case of code: A, press 1). Then press OK.

In the POWER off mode, press and hold PLAY for

more than 5 seconds. The current code (“A” or “b”) will

appear on the display. Then press 3 on the remote

control. The current code of the remote control will be

transmitted to the unit and the unit will be adjusted to

the transmitted code. Then the code will disappear

after approx. 4 seconds.

NOTE:

• If the remote control has been set to b, the DVD/VCR also must be set to b. Otherwise, the DVD/VCR can not

be operated with this remote control.

• To reset to “A”, repeat above procedure. However press 1 instead of 2.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections and Installation

Connect your DVD/VCR to your home's antenna and to your TV-set as shown in the illustration.

When you have finished these connections you connect your DVD/VCR to the 230 V / 50 Hz mains.

Antenna

TV Scart Socket (A1)

Antenna-Input

VCR/DECODER

Scart Socket (A2)

RF-Input (from

house antenna)

To Scart socket

DVD/VCR

RF-Output (to TV)

AC power cord 230V/50 Hz

Scart cable (not supplied)

Supplied Coaxial cable

Connect a TV with the Scart socket

In addition to the coaxial cable connection, connect also with scart cable. The picture and sound will be transmitted

best through the scart cable. In this case, the TV need not be tuned to the video recorder. The AV-channel also need

not be tuned. The video recorder switch the television to video operation through the scart cable automatically. The

stereo-playback is possible in only case through a scart cable!

If your TV-set does not switch to video-playback operation automatically, please

turn your TV's video switch to VIDEO position manually.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback connection

The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is

dependent on the model and features of each component. Check the Owner's Manual provided with each

component for the location of SCART socket.

Connection to a Satellite Receiver

If a Satellite Receiver is used, we recommend the following configuration:

SCART-cable (not supplied)

Satellite

Antenna

DVD/VCR

Satellite

Receiver

SCART-cable (not supplied)

To record from Satellite Receiver press "AUX" on the remote control of DVD/VCR twice. "A2" will appear

on the front display. Select the desired TV-program at Satellite Receiver.

Connect to a TV with S-Video Output

S-Video Cord (not supplied)

DVD/VCR

Audio (L) Output

Audio (R) Output

To S-Video Input

S-Video Output

To Audio (R) Input

To Audio (L) Input

AUDIO Cord (not supplied)

Note:

• The S-VIDEO jack is useful only for DVD section.

• If you use the connection with S-Video Cord, set the "Video Out Select" (P.44) to "Video".

Connection to a Decoder (for Premiere Programs)

SCART-cable (not supplied)

TV-unit

DVD/VCR

Cable TV-

connection

Decoder

RF-Output

SCART-cable (not supplied)

SYSTEM SETUP

CLOCK SET

LANGUAGE/SPRACHE/LANGUE

AV2

[DEC]

SELECT :

ENTER

EXIT

Note: Make sure that AV - mode in SYSTEM SETUP - menu has been set

to DEC .

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback connection

Connect to a Stereo Amplifier with Audio Output

If your DVD/VCR is connected to a stereo amplifier, the video soundtrack can output through the loudspeakers of

the stereo system.

SCART-cable (not supplied)

To SCART

input

SCART-Socket

(for TV-RGB/Composite)

DVD/VCR

Stereo Amplifier

Audio (L) Output

Audio (R) Output

To Audio (L) Input

To Audio (R) Input

AUDIO Cord (not supplied)

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems

such as Dolby Digital and DTS by using the Coaxial Digital Output.

Use this connection to connect an:

• AV amplifier with built-in *Dolby Digital decoder

• AV amplifier with built-in *DTS decoder

SCART-cable (not supplied)

To SCART

DVD/VCR

SCART-Socket

input

(for TV-RGB/Composite)

AV Amplifier with

Coaxial digital

Audio Output

built-in various

Coaxial digital cable

(not supplied)

decoder as above

Connecting the optical digital cable

You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital

cable.

When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.

When not using the optical digital cable, attach the dust protection cap to protect against dust.

NOTES:

• The OPTICAL, COAXIAL jacks are useful only for DVD section.

VHS signal is output only from the SCART-sockets, AUDIO L/R jacks and RF OUT jack.

• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV

Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the

speakers to be damaged.

• DTS audio will be output only from the COAXIAL output. To hear DTS audio, DTS-Decoder is necessary.

When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the TV to the AV-Channel

We recommend that television and DVD/VCR are being connected with a scart cable.

In this case, the setting of AV-channel is not necessary. Picture and sound of video cassette will be transmit-

ted to television through the scart cable automatically. Please read the next page.

In case of no scart cable connection,

you must set the television to the AV-

channel. Pay attention to the following

notice:

Preparation

•

Turn on the TV.

Make sure the power of DVD/VCR has been turned off.

A built-inTV-broadcast in DVD/VCR can

do the video playback through the sup-

plied antenna cable.This broadcast is

sent on UHF, channel 36.To receive this

broadcast, you must tune your televi-

sion to channel 36 in UHF-band.(see

step 2)

Press the DVD/VCR’s

control) and keep pressing it until the display shows rF:.

The number next to rF: is the channel in UHF-band to

(not the one on your remote

which you must tune your TV-set.

VCR

Switch your television to the program position on which

the video playback is seen. Start the channel search of

your television until “TEST” appears. Store this tuning in

television like also the case of the reception for normal

television-channels you would store.

In case a broadcast has already sent

to channel 36 in your area or you con-

nect a additional equipment (e.g. Sat-

ellite receiver) with a coaxial cable

(without a scart cable), you must tune

the sending channel in DVD/VCR (see

step 3). In your television store the both

equipment (the DVD/VCR and the sat-

ellite receiver) to 2 different program

positions.

TEST

IfyouwanttouseyourDVD/VCR,switch

your television to this program position.

If there is interference in the picture (you see 2 programs

simultaneously or what is called Ghosts), change the

sending channel in DVD/VCR. To do this, go back to the

step 1. Use PR button on the DVD/VCR to change the

number next to the rF:. Then return to step 2 and tune the

television newly.

Example:Your satellite receiver is sent

to channel 36. You tune the DVD/VCR

to channel 40 (see step 3).

(If your DVD/VCR is also sent to chan-

nel 36, the interference will occur.)

In your television store the channel 36

to e.g. program position 3 and store the

channel 40 to e.g. program position 4.

Note that the program position 4 must

be suitable for video-playback espe-

cially. Please see the owner's manual

for your television. If the playback pic-

ture is often distored, you must select

the other program position for DVD/

VCR.

Press

button to turn off the DVD/VCR.

1,4

TEST

Note:

If you receive one TV-program on channel 35, 36 or 37, the interference can be occurred to the built-in TV

channel in DVD/VCR. If you use a scart cable for the transmission of picture and sound, you can cut off the

built-in TV-program. Then the video playback through the supplied antenna cable is not possible any more.

Press PR repeatedly (at step 1) until OFF will appear.(OFF appears after 69 or before 23)

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the On-screen language

Turn on your TV and select the AV-

Program position, on which you have

already set your DVD/VCR. (it will

happen automatically by Scart-cable

connection). So you can follow up the

all setting on TV screen.

Preparation:

• Press the

button to turn on the DVD/VCR.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

You can choose from three different languages (English,

French and German) for the on-screen displays.

Press SET UP MENU.

ATS (AUTO TUNING SYSTEM)

Press

to select the

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

SYSTEM SETUP option, then

press OK.

If you use the unit for the first time

and press SET UP MENU,

instead of the main menu screen

on the right the “LANGUAGE”set

up menu screen in step 2 may

appear.

SELECT

ENTER : OK

EXIT

: MENU

Press

to select the

SYSTEM SETUP

“LANGUAGE” option, then

press OK.

CLOCK SET

LANGUAGE/SPRACHE/LANGUE

AV2

[DEC]

SELECT

ENTER : OK

EXIT

: MENU

Press

to select the de-

LANGUAGE/SPRACHE/LANGUE

sired language: English (EN-

GLISH), German(DEUTSCH)or

French (FRANCAIS), then press

OK.

ENGLISH

DEUTSCH

FRANCAIS

SELECT :

OK: OK

Press SET UP MENU repeatedly until the TV picture appears

on the screen.

NOTES:

• If the unit does not operate prop-

erly, or No key operation (by the unit

and/or the remote control): Static

electricity, etc., may affect the player's

operation. Disconnect the AC power

cord once, then connect it again.

• Both the VCR and the DVD have their

own menu option (See page 41).

• If no buttons are pressed for more than

60 seconds, the MENU screen will

return to normal TV-operation auto-

matically.

Download from Www.Somanuals.com. All Manuals Search And Download.

ATS Automatic Tuning System and Auto Time/Date Setting

This VCR has a built-in TV receiver

module. Before you can record a TV

program, all the available TV stations

must be tuned in and preset in the

memory. The ATS function (Automatic

Tuning System) allows all the locally

available TV stations to be automati-

cally stored and sorted according to

the currently effective national station

list. To accomplish this, ATS will need

about 12 minutes. During this period

of time the VCR cannot be used. If you

wish to change the station sequence,

you can later perform a removing

procedure (see page 17).

Preparation:

• Press the

button to turn on the DVD/VCR.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Press SET UP MENU. Press

ATS (AUTO TUNING SYSTEM)

repeatedly until the dot

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

SELECT :

ENTER : OK

EXIT : MENU

before ATS (AUTO TUNING

SYSTEM) blinks.Then press OK.

If no channel setting is done:

Press 1 of number keys at first, and then press SET UP MENU.

Press

to select

ATS (AUTO TUNING SYSTEM)

AREA

the desired country. Then press

the OK.

GERMANY

HOLLAND

AUSTRIA

DENMARK

ITALY

SWISS

SELECT :

OK : OK

EXIT : MENU

The ATS setting is completed when “CHANNEL MAPPING”

indication and the current time display appears.

Press SET UP MENU repeatedly until the TV program will be

displayed.

CHANNEL MAPPING

1 ARD

2 ZDF

3 RTL

4 SAT1

PRO 7

BR3

SW3

HR3

10 WDR3

MDR3

TM3

ATS ACTIVE

SELECT

SKIP

: CANCEL

CHANGE NAME : 1

MOVE

EXIT

: 2

: MENU

VCR

If the CLOCK SET-menu appears and 00:00 appears in the display,

please set the clock manually. In this case, no station transmitting

time data can be received (see page 19).

Note: If ATS is done under the bad receiving condition, one or more

stations may not be found. In this case, set these stations

manually.(see page 20)

Download from Www.Somanuals.com. All Manuals Search And Download.

ATS

Preparation:

Skipping unwanted TV stations

(Skip those TV stations that are not

wanted to be selected by pressing the

PR button.)

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Press SET UP MENU.

ATS (AUTO TUNING SYSTEM)

Press

to select

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

CHANNEL SETUP. Then press

OK.

SELECT

ENTER : OK

EXIT

: MENU

Press

to select

CHANNEL SETUP

CHANNEL MAPPING. Then

press OK.

CH TUNING

CHANNEL MAPPING

SELECT :

ENTER : OK

EXIT

: MENU

Press

repeatedly

CHANNEL MAPPING

until the TV station to be skipped

blinks.

1 ARD

2 ZDF

3 RTL

4 SAT1

5 PRO 7

6 BR3

7 SW3

8 N3

9 HR3

10 WDR3

11 MDR3

12 TM3

SELECT

SKIP

: CANCEL

CHANGE NAME : 1

MOVE

EXIT

: 2

: MENU

Then press CANCEL.

The number before the canceled

channel (e.g. 12) will be

bracketed.

CHANNEL MAPPING

1 ARD

2 ZDF

3 RTL

4 SAT1

5 PRO 7

6 BR3

7 SW3

8 N3

9 HR3

10 WDR3

11 MDR3

12 TM3

SELECT

SKIP

: CANCEL

CHANGE NAME : 1

MOVE

EXIT

: 2

: MENU

Canceling the skip function:

Press or repeatedly until the skipped TV station blinks,

then press CANCEL.

The brackets will disappear.

Press SET UP MENU repeatedly until the TV picture appears

on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

ATS

Reassigning TV station positions

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The

VCR indicator will light)

Example: Reassign the TV station under No. 6 to position No. 2.

Select the "CHANNEL MAPPING" in Menu-screen

in the same way as the step 1~2 on page 16. Then

press OK.

After

approx. 12

MOVE CHANNEL

1 ARD

6 ZDF

9 HR3

10 WDR3

11 MDR3

12 TM3

seconds the station

BR3 is set in new

position 2.The ZDF will

be extracted to the first

line.

5 PRO 7

2 ZDF

3 RTL

4 SAT1

7 SW3

8 N3

Press

CHANNEL MAPPING

POSITTION

MOVE

EXIT

repeatedly until the TV

station to be reassigned

blinks.

1 ARD

2 ZDF

3 RTL

4 SAT1

: OK

5 PRO 7

6 BR3

7 SW3

8 N3

9 HR3

: MENU

10 WDR3

11 MDR3

12 TM3

Now to finish this pro-

cedure and at the same

time set the protruded

station (ZDF) to the

blank position 6, press

SELECT

SKIP

MOVE CHANNEL

: CANCEL

1 ARD

2 BR3

3 RTL

4 SAT1

5 PRO 7

6 ZDF

7 SW3

8 N3

9 HR3

CHANGE NAME : 1

10 WDR3

11 MDR3

12 TM3

MOVE

EXIT

: 2

: MENU

Press "2" of number

keys. Then, the TV

station will be moved to

the first display line.

POSITTION

MOVE

EXIT

SET

MOVE CHANNEL

6 BR3

9 HR3

10 WDR3

11 MDR3

12 TM3

: OK

1 ARD

2 ZDF

3 RTL

4 SAT1

5 PRO 7

repeatedly until TV-

station appears.

: MENU

7 SW3

8 N3

Or you can of course select another station to set in

the protruded station(ZDF) in step 4.

POSITTION

MOVE

EXIT

: OK

: MENU

Press SET UP MENU repeatedly until theTV picture

appears on the screen.

Press

repeatedly until the position

number blinks to which the selected TV station is to

be moved, then press OK.

MOVE CHANNEL

6 BR3

9 HR3

10 WDR3

11 MDR3

12 TM3

1 ARD

2 ZDF

3 RTL

4 SAT1

5 PRO 7

7 SW3

8 N3

POSITTION

MOVE

EXIT

: OK

: MENU

WAIT blinks.

MOVE CHANNEL

WAIT

ARD

ZDF

RTL

PRO 7

HR3

10 WDR3

The data will be

ordered in the table

newly.

MDR3

TM3

SW3

SAT1

• A position number(6) will indicated near the protruded

station(ZDF) at the first line.

If any button is not pressed for more than 60 seconds,

this station(ZDF) will be set to this position number(6)

automatically.

POSITION :

MOVE

EXIT

: OK

: MENU

Download from Www.Somanuals.com. All Manuals Search And Download.

ATS

Preparation:

Changing TV station names

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

For a number ofTV stations (such as

MTV) no name code will be displayed

because these TV stations do not

provide the necessary information.

You can enter the respective names

yourself. Moreover, unwanted station

codes can be changed by the user.

Example: MTV is assigned to station No.10, but the code “MTV” will

not be displayed and will also not appear in the table.

Select the "CHANNEL MAPPING" in Menu-screen in the same

way as the step 1 ~ 2 on page 16. Then press OK.

Press

repeatedly

CHANNEL MAPPING

until the station number position

now to be named will blink.

ARD

ZDF

RTL

PRO 7

BR3

SW3

HR3

SAT1

• If you want to turn over the page

when the blinking spot is in the

left or right edge of on-screen,

SELECT

SKIP

: CANCEL

CHANGE NAME : 1

MOVE

EXIT

: 2

: MENU

press

repeatedly until

the next page's 12 stations ap-

pears.

Press "1" of number keys. The

first display line will change to

CHANGE BROADCAST NAME

1 ARD

2 ZDF

3 RTL

4 SAT1

5 PRO 7

6 BR3

7 SW3

8 N3

9 HR3

"CHANGE

NAME".

BROADCAST

SELECT

NAME

CLEAR

EXIT

: OK

: CANCEL

: MENU

Press

repeatedly until

CHANGE BROADCAST NAME

the desired character appears.

Then press . Use or to

select the next character. Then

press . Up to four characters

can be used to create a station

name. The character “ ” stands

for a space.

1 ARD

2 ZDF

3 RTL

4 SAT1

5 PRO 7

6 BR3

7 SW3

8 N3

9 HR3

10 M

SELECT

NAME

CLEAR

EXIT

: OK

: CANCEL

: MENU

Then press OK.

Each press of

will change the screen display as follows.

A, B, C, ... X, Y, Z

0, 1, 2, ... 7, 8, 9

–

•

Press SET UP MENU repeatedly until the TV picture appears

on the screen.

Note:

When a wrong character is entered,

press CANCEL and enter the correct

character.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Time and Date

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

If the time and date is not be displayed

for some reasons after the ATS

function has been completed, a manual

clock adjustment will be required.

Example: Setting the clock to 11:30, 23rd October 2002.

Press SET UP MENU. Press

SYSTEM SETUP

repeatedly until the dot

before SYSTEM SETUP blinks.

Then press OK. Then press

CLOCK SET

LANGUAGE/SPRACHE/LANGUE

AV2

[DEC]

repeatedly until the dot

before CLOCK SET blinks.Then

press OK.

SELECT

ENTER : OK

EXIT

: MENU

Press

repeatedly or

number keys until “23” appears.

Then press

CLOCK SET

DAY

23 WED

MONTH

YEAR

TIME

2002

0:00

AUTO TIME ON

SELECT

SET

/ 0–9

: OK

EXIT : MENU

Set the month, year, hour and

minute in the same way as the

step 2. Then press

CLOCK SET

DAY

23 WED

MONTH

YEAR

TIME

2002

11:30

AUTO TIME ON

Note:

SELECT

SET

• In case of a power failure the clock will

continue to operate for another 30 min-

utes with quartz-controlled precision.To

indicate that the power failure has lasted

for an excessive period of time “0:00”will

blink on the display. In this case read-

just time and date.

/ 0–9

: OK

EXIT : MENU

Press

to select “ON” or “OFF”, then press OK. If “ON” is

selected, any required time corrections will be performed

automatically (see left). In this case the personnel of the

appropriate TV station or of Telecom will be responsible for

If the clock does not have been adjusted

yet, the step 1 will appear automatically.

• The clock will only be automatically set

when the VCR is connected to the

Telecom CATV network.All the provided

CATV stations should be stored in the

VCR. This is the case when the ATS

function has been completed. The an-

tenna system must be free of any de-

fects, e.g. there should be no picture

noise.The clock will be re-adjusted every

30 minutes except the period between

23:00 and 1:00 o’clock. In case the total

difference between the indicated time

and the current time is more than 5 min-

utes, the clock will not be corrected.The

switching from winter time to summer

time will be considered.

correcting the time setting. If any

CLOCK SET

error occurs during such an

adjustment (e.g. switching from

summer time to winter time), your

clock will show the incorrect time.

To set the correct time select

“OFF” and follow the procedure

described above.

DAY

23 WED

MONTH

YEAR

TIME

2002

11:30

AUTO TIME ON

SELECT

SET

: OK

EXIT : MENU

• In case of an erroneous input press

step and enter again.

to go back to before

Press SET UP MENU repeatedly until the TV picture appears

on the screen.

The clock will begin operation and the colon will blink on the

VCR display.

The clock will not be adjust automati-

cally when:

• timer activated.

VCR

• antenna not connected.

• only an outdoor antenna or a satellite

receiver connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual TV station presetting

ATS stores the broadcast automatically.

However if you do the ATS under

unfavorable receiving conditions,

some broadcasts happen to be not

finded by ATS. For these broadcasts,

you can store also by manual.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Example: Preset the SAT1 on program position 5.

Press SET UP MENU.

ATS (AUTO TUNING SYSTEM)

Press

to select

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

CHANNEL SETUP. Then press

OK.

SELECT

ENTER : OK

EXIT

: MENU

Press

to select CH

CHANNEL SETUP

TUNING. Then press OK.

CH TUNING

CHANNEL MAPPING

SELECT :

ENTER : OK

EXIT

: MENU

DEC OFF will blink. Press OK.

DEC OFF does not blink any

more. SEARCH will appear.

VPS CH

ARD

Note:

DEC OFF

If you wish to store the

PREMIERE manually, the

decoder must have been

connected as on the lower of p.11.

SELECT :

EXIT :

: OK

During DEC OFF is blinking, press

DEC ON will blink now.

Press OK.

Press

(rising frequency) or

CH 1

(falling frequency) once. The

search starts. It stops at each

broadcast automatically ("

change to " 4 "). Press or

repeatedly until the SAT1

appears.Only in case of receiving

of the weak broadcast (drifting

picture), search dose not stop. If

DEC OFF

SEARCH :

/ F. TUNE :

EXIT

: MENU

Note:

you want to stop, press

Occasionally, the auto search might catch

a weak signal and stop. If the TV station

signal is weak, you shouldn't store this

station.

In that case restart the auto search using

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual TV station presetting

The Fine Tuning adjustment

Please wait until OK: ENTER

appears. It may take a few

seconds.

Under a normal receiving condition, the

station-search will stops automatically at the

best receiving position. That picture will

appear without disturbance.

This receiving position will be memorized

automatically. The Fine Tuning can not be

memorized additionally.

VPS CH

SAT1

Then press OK.

In the next step, the program

position on which this station

should be stored will be set.

DEC OFF

SELECT :

/ F. TUNE :

EXIT :

: OK

In rare case of bad receiving condition, the

station-search might not stop at the best

receiving position. That picture will appear

with disturbance, e.g. waving lines.

Only in this rare case, use the Fine Tuning to

tune the concerned station manually and

exactly.

Press

repeatedly until

VPS CH

"5" displayed.

Or enter 5 with number keys.

Then press OK.

SAT1

DEC OFF

In step 5, press

adjusted to best position. Then press OK.

until the station is

/ 0–9

EXIT :

: OK

Repeat the steps 3 and 6 to preset other TV stations.

Press SET UP MENU repeatedly until the TV picture appears

on the screen.

To skip a channel position

Unwanted channels can be skipped so that they cannot be called

up by pressing PR. Select the channel to be skipped...

CH 29

SWF

VPS

VCR

....e.g. channel 29.

Select channel 29, then press CANCEL.

This channel’s number will be flashing. That way you can cancel

further channels one after the other.

To cancel the channel skipping

Note:

Select the skipped channel using number keys, then press

Even the skipped program position can be CANCEL. The channel No. does not blink any longer, and the

called up with number keys.

channel No. now may be selected again using PR.

Download from Www.Somanuals.com. All Manuals Search And Download.

Loading and Unloading a Cassette Tape

Use only video cassette tapes marked

and

• Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder. However, S-VHS recording

is not possible with this model.

• This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS

recordings with regular VHS resolution.

• HQ VHS is compatible with existing VHS equipment.

• SQPB playback can be seen only at PAL SP mode.

Insert the cassette tape with its labeled side facing up

and the erase prevention tab positioned at your left.

An inverted cassette tape cannot be inserted.

Push the center of the tape until it is automatically

inserted.

VCR

Erase prevention tab

Automatic power ON

When you insert a cassette tape the DVD/VCR power will turn ON automatically.

Automatic playback

When loading a cassette tape without an erase prevention tab, playback will start automatically.

Unloading

Press EJECTon the unit. Even if a tape is being

played, press this button only once.

Remove the cassette tape.

VCR

Automatic tape eject

This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its

beginning, the cassette tape will be ejected automatically.

To prevent accidental erasure

To record again

Removetheerasepreventiontabwithascrewdriver.

Cover the hole with a piece of adhesive tape.

Screwdriver

Erase prevention tab

Adhesive tape

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassette tape playback

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Load a prerecorded tape

(When loading a cassette tape

without the erase prevention

tab, playback will start auto-

matically).

To start playback

Press

Playback will start.

If the cassette has not loaded

yet,

will blink for 4 seconds.

VCR

To stop playback

Press 3.

VCR

To rewind the tape or forward it rapidly

Stop the playback or recording with 3.

To rewind the tape:

Press

To forward the tape:

Press

To stop the tape-winding, press 3. To switch to playback directly

(without 3), press

Forward/Reverse picture search mode

When the tape is being winded, you can switch to picture search

mode(seenextpage).Todothis,press or andholditdown.

The unit will resume the tape winding as soon as the button is

released.

NOTES:

• This VCR selects the playback tape

speed SP or LP automatically.

• The Cassette tape and DVD disc can

be played back simultaneously. If you

press VCR or DVD, the tape playback

and DVD playback alternate with each

other on the screen.

NTSC video cassette playback

When using a pre-recorded NTSC video cassette tape, the

connected TV set must operate with a 60 Hz vertical frequency.

Otherwise the on-screen picture will be affected by vertical

rolling.EvenifyourVCRsetiscapableofprocessingNTSCvideo

signals, the picture may be shortened vertically (appearance of

black bars at the top and at the bottom of the TV screen). The

dubbing of a NTSC video cassette tape to a standard PAL VCR

is not possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Special playback/Playback sharpness/Skip Search

Special playback

Playback sharpness

Adjust the sharpness of playback picture during playback.

During slow motion, still picture and picture search,

sharpness-adjusting is impossible.

Picture Search

Reverse picture search function

Press

x 1 or x 2 during the playback.

Start the playback of video tape.

Forward picture search function

Press x 1 or x 2 during the playback.

To return to playback: Press

Press SET UP MENU.

ATS (AUTO TUNING SYSTEM)

Press

to select

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

VCR SETUP.Then press

Still Picture

Press 4 during playback. To resume normal

OK.

playback: Press

SELECT

VCR

ENTER : OK

EXIT

Slow Motion

During playback press SLOW.

You can change the slow speed by the additional

pressing of SLOW.

To return to playback: Press

Press

SHARPNESS. Then

press OK.

to select

VCR SETUP

VCR

NICAM

AUDIO MIX

SHARPNESS

[AUTO]

[OFF]

Slow tracking and vertical lock adjustment

SELECT :

If noise bars appear in the picture during slow motion,

press the SET + or – to reduce the noise bars.

If the still picture jitters excessively, press SET + or –

to stabilize the still picture.

ENTER : OK

EXIT

"SHARPNESS" will appear

and then disappear after

60 seconds of the last

button-press. Adjust with

Frame by Frame picture

During playback, press 4 one by one: The picture

advances frame by frame.

To return to playback: Press

VCR

sharper or

lesser.

Adjusting tracking condition

Automatic tracking adjustment

softer

sharper

Whenever you insert a tape and start playback,

automatic tracking starts working and continuously

analyzes the signal to enable optimum picture quality

during playback.

Press SET UP MENU repeatedly until the TV picture

appears on the screen.

Note:

Manual tracking adjustment

To return to the initial sharpness setting, press CANCEL

while the sharpness setting screen is appearing.

If automatic tracking cannot eliminate noises well during

playback, press SET + or SET – to eliminate the noises.

“MANUAL TR.” will appear. Press it briefly for a fine

adjustment, or press and hold for a coarse adjustment.

Skip Search

Each time you press SKIP SEARCH while a tape is playing,

the unit will fast-forward ahead approx. 30 seconds on the

tape. You may press the button up to six times in a row to

move approx. 180 seconds (three minutes) ahead.

To return to automatic tracking, press A. TRK.

Notes:

•

The audio output is muted during SPEED SEARCH,

STILL, FRAME ADVANCE and SLOW MOTION.

For example: 1 press: approx. 30 seconds of tape

2 presses: approx. 60 seconds of tape

• During picture search mode there will be noise bars

which are caused by the system.

3 presses: approx. 90 seconds of tape

• The Special Playback will automatically change to

playback after approx.5 minutes to protect the video

tape against excessive wear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat Playback

Normal repeat playback

The entire video tape will be played until its end. The tape will

then automatically rewind to the beginning and the playback will

be repeated.

Press SET UP MENU. Press

to select VCR

1 _{EXTENSION. Then press OK.}

Press

to select AUTO REPEAT.

Then press OK to select [ON] or

[OFF].

If [ON] is selected, the playback

will be repeated endlessly.

VCR EXTENSION

AUTO REPEAT

SCENE REPEAT

[ON]

SELECT :

ENTER : OK

EXIT

Press SET UP MENU until the menu screen is cleared.

To start the playback, press

The playback will be repeated endlessly.

To cancel normal repeat mode:

Follow the above step 3, then press OK to select the OFF

position. Press SET UP MENU to return to the TV.

Scene repeat playback

Press SET UP MENU.

Press

to select VCR EXTENSION. Then press OK.

Press

to select SCENE

VCR EXTENSION

REPEAT. Then press OK.

AUTO REPEAT

SCENE REPEAT

[OFF]

Theplaybackstartsautomatically.

SELECT :

ENTER : OK

EXIT

Press OK at the point you want to

start scene repeat play-back.

S – REPEAT

S–REPEAT will blink on the

screen.

Press OK once again at the point

4 _{you want to end scene repeat}

SR – R

playback.

NOTE:

If the unit is turned off or starts record-

ing, the repeat mode is canceled.

SR–R will appear on the screen

and the tape will be rewinded

automatically to go back to the

starting point.

When the starting point was

SR – PLAY

found, the Scene repeat-play-

back will start automatically.

SR-PLAY will appear only once.

To stop Scene repeat playback:

Press 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

Counter Display

Preparation:

ZERO RETURN function

This function makes tape-rewinding

stop at the counter 00:00:00 position

automatically.

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Press OSD.

The counter display shows the

tape running time during

playback or recording.

The Recorder will indicate REC

during recording for itself.

VCR

12:00 SUN

STEREO

ZDF

00:04:38 SP

Press C.RESET at the desired

tape position.

The counter display will be reset

to the "00:00:00" position (e.g.

the beginning of recording).

12:00 SUN

STEREO

ZDF

VCR

00:00:00 SP

Press 3 when playback or recording is finished.

Press ZERO RETURN.

The tape will be rewinded or fast forwarded and automatically

stop at the ”00:00:00” position.

Press OSD once again to make the all indicator disappear.

The DISPLAY-button

Press DISPLAY during the playback. The clock and tape counter

alternate with each other in the display.

VCR

Note:

You can set the tape counter to 00:00:00 with C.RESET anytime.

Therefore, the counter display can also indicate 00:00:00, even when

the tape counter does not reach its beginning yet. Even if the tape

counter indicates 00:00:00, it can be rewinded moreover. If the tape

was rewinded over the point of 00:00:00, the minus mark (–) appears

in the counter display. Although the tape counter seems to forward

Note:

• When you load a video cassette, the dis-

play indication changes to "00:00".

• The counter display does not function

on non-recorded (blank) sections of the

tape. When you rewind, fast forward or

play tapes through blank sections, the

counter display stops.

when you press

, in fact the tape is being rewinded. When the

tape reaches the beginning, the tape-rewinding stops automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Index Search System

Example: Indexing of TV commercials.

Whenever a recording is begun an

invisible index mark is recorded on the

tape.These index marks are all identical,

and each mark means: "Here starts a

new recording". Every DVD/VCR

equipped with the Video Index Search

System (VISS) can locate these marks

at the beginning of any recording.

Start playback and wait until the

end of the TV commercial is

reached, then press 3.

While holding 2, press

indication goes off, 3 may be pressed. This short recording

process will be sufficient to set an index mark.

once. When the "INDEX" on-screen

This will result in about 10 seconds of the TV commercials to be

overwritten by another recording. Due to the system the end of

this recording will be followed by a recording gap (noise signal)

of approx. 5 seconds.

Recording several Index Marks

Due to the system only one index mark will be recorded at the

beginning of a recording. If you intend to set several index marks

during a single recording, follow the procedure below:

At the point of the recording where

an index mark is to be set press 4.

Theunitwillswitchtotherecording

pause mode.

VCR

REC

Press PR +/

back to the original TV program.

Press 4 to resume recording.

–

repeatedly to switch

VCR

REC

Index Search

Press INDEX + or – during stop or play

mode.

For Succeeding programs:

Press INDEX +.

For Preceding programs:

Press INDEX –.

(Additional press increases the INDEX

NO. up to 9.)

When the INDEX + or – is pressed, the

unit starts searching the INDEX NO.

selected and finds the portion, then

playback starts automatically.

To stop the Index Search, press 3.

Notes:

•

When you record an INDEX mark at

the very beginning of the tape, the

mark may not be found.

During INDEX search, the tape may

stop and begin to play at a slightly

different location.

•

7 or 6 is displayed

•

INDEX may not function properly with

old or worn out video tapes.

INDEX marks may not be found if it is

extremely close to the point where the

search began.

Inrecording,ifyoustoprecordingtem-

porarily, the INDEX mark is not re-

corded on the tape.

INDEX NO. (up to 9)

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording a TV Program

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Load a blank cassette tape with the

erase prevention tab intact. (The

DVD/VCR will automatically turn

on.)

VCR

Select the program(e.g.29) you want to record with PR +/– or

number keys.

VCR

1~9 : e.g. 5 = press “5”

10~80 : e.g. 29 = press “2” and “9”.

If a recording in Long Play mode is intended, press

SPEED) to display "LP". (see Note below)

(TAPE

On the VCR, press 2.

Or on the Remote, while holding 2,

press

" will appear on the screen for

about 4 seconds and “REC” will

appear on the display.

VCR

REC

If the erase prevention tab is removed, the tape will eject when

both the 2 and are pressed for recording. (see p.22)

To Stop Recording

Press 3.

VCR

To Stop Recording Temporarily

To stop a recording for a short

period of time press 4. Press this

button again if you want to resume

the recording.

Notes:

• Since the DVD/VCR has a built-in TV

tuner the TV set may be turned off when

recording. The TV set may only be used

to check for accurate program adjust-

ments or to monitor recordings.

• You can confirm on the TV-screen whether

youselectedSPorLP. PressOSDtoseethe

status display. (see page 29)

VCR

REC

Attention:

A safety circuit turns the pause mode off automatically after 5

minutes, and the DVD/VCR will stop the recording mode.

• If you wish to watch the DVD playback

during the normal recording on VCR,

press DVD to change to DVD mode and

perform the DVD playback (see page

42).

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording a TV Program

Recording with a SCART Cable:

Press TV/VCR until "VCR" appears on the display. Select

the program on the DVD/VCR you want to record. This

programcanbewatchedonthescreenandrecordedbythe

You can record a program using the

TVreceiveroftheDVD/VCRandatthe

same time watch another program on

the TV set using its receiver. As the

DVD/VCR automatically switches the

TV set the following points should be

observed:

DVD/VCR.

VCR

“VCR” indicator goes on.

While the VCR is recording press TV/VCR until the "VCR"

indicator on the display goes off. The TV set now displays

the program of its built-in receiving module. Select the TV

channel you want to watch on the TV set. Although the TV

set now shows another program the DVD/VCR will con-

tinue recording the previously selected program.

REC

“VCR” indicator goes off.

Using TV/VCR you can switch the TV screen between the

DVD/VCRpictureandtheTVpicture. Ifthe"VCR"indicator

islitonthedisplay,youwillwatchtheDVD/VCRpicture.This

has no trouble on the recording.

VCR

REC

“VCR” indicator goes on.

To Display VCR operation Status

Press OSD. The clock, day of the week and more informa-

tions will be indicated.

To cancel the indicating: Press OSD until all indicator

disappear.

Day of the week

Time

Deck-status

here: Playback

Program

number or

Scart input

(AV1,AV2 or

AV3)

Indication for

Hi-Fi-playback

or stereo-

reception

23:59 MON VPS CH 80

HI-FI

****

Station's name

L CH

(e.g. ZDF)

01:36:58 SP

Indication for

the selected

Cassette in

Unit

playback sound

(e.g.: L CH = Left Channel)

Tape speed

Stand of Tape counter

Auto Rewind Feature

The DVD/VCR will automatically rewind

when the tape has ended (except during

ITR and TIMER REC). It will also eject

the cassette tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Instant Timer Recording (ITR)

Preparation:

The instant timer recording feature

provides a simple and convenient way

to make a timed recording.

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Load a blank cassette tape with the

erase prevention tab intact. (The

DVD/VCR will automatically turn

on.)

VCR

Select the program (e.g.29) you want to record with PR +/– or

number keys.

VCR

1~9 : e.g. 5 = press “5”

10~80 : e.g. 29 = press “2” and “9”.

If a recording in Long Play mode is intended, press

SPEED) to display "LP". (see note on page 28)

(TAPE

Press 2 on the VCR or while holding 2, press

the Remote to begin recording. Press 2 on the VCR again to

stop recording after 30 minutes. Each additional press of 2 will

increase recording time as shown in the chart below, up to a

maximum of 5 hours. The ITR and

recording time will appear on the

screen for about 4 seconds. And,

REC will keep blinking in the display.

ITR 0:30

CH 29

STEREO

INDEX

SWF

VCR

REC

“REC” will keep blinking

in the display.

Tape speed: SP

1:30

2:00

Recording

0:30

1:00

3:00

4:00

5:00

Tape speed: LP

Recording 0:30 1:00

2:00

3:00

1:30

4:00

.......

5:00

10:00

To Extend the Recording Time

While holding 2, press

repeatedly until the desired time

appears on the display.

ITR 1 : 30

CH 29

Note:

SWF

• If you wish to watch the DVD playback

during the ITR, press DVD to change to

DVD mode and perform the DVD play-

back (see page 42).

• If the tape supply has not sufficed for

ITR recording, the clock symbol ( ) will

blink at the tape-end and then VCR

mode will change to DVD mode.

In this case, press • to cancel the

blink or press EJECT to remove the cas-

sette tape.

To stop the ITR

Press 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

SHOWVIEW -Recording

Look up the SHOWVIEW number codes in

an appropriate TV program magazine.

Select the desired TV program for

recording and refer to the number code

next to it.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

Press PROG.

SHOWVIEW NO.----------

ONCE

DAILY

WEEKLY

SHOWVIEW NO.

SELECT

CLEAR

: CANCEL

: OK

If the clock is not set, CLOCK SET

menu will appear automatically.

EXIT

: PROG.

Enter the SHOWVIEW code with

number keys.

SHOWVIEW NO.3277--------

ONCE

DAILY

WEEKLY

SHOWVIEW NO.

SELECT

CLEAR

• In case of an erroneous input,

press CANCEL and enter the cor-

rect number again.

: CANCEL

: OK

EXIT

: PROG.

Select with

DAILY or WEEKLY. ONCE is already set.

ONCE = To record a program only

once.

SHOWVIEW NO.327741029

ONCE

DAILY

DAILY = To record TV programs

aired daily.

WEEKLY

SHOWVIEW NO.

SELECT

CLEAR

: CANCEL

: OK

WEEKLY = To record TV programs

aired once a week.

EXIT

: PROG.

Press OK. By the SHOWVIEW Code the entered data appear on

the screen.

SHOWVIEW NO . 327741029

DATE

START

END

15 WED

17:30

18:00

— —

• If the entered Number is not cor-

rect, the indicator “SHOWVIEW

NO. ERROR” appears. Enter the

Number correctly again.

SPEED

VPS/PDC OFF

SELECT :

SET

/ 0—9

EXIT

: MENU

• Only in case of the TV station that you decode for the first time,

the – – will blink at the CH line. That is to say, you must enter

the corresponding channel position with the decoded TV sta-

tion manually. See next page.

Note:

• The built-in timer stores 8 memories.If the

“PROGRAM FULL” indicationappears,

you must delete one memory (see page

34).

....to be continued to next page

• If you wish to receive the suitable pro-

gram with a satelite receiver, the AV-po-

sition must be given near “CH”.

Press AUX repeatedly until AV2 appears.

• After a power failure or disconnection of

the power plug, all programmed record-

ing settings and time display will be lost

upon resumption of power. In this case,

reset the clock (see pages 19) and re-

program any timer recordings.

Download from Www.Somanuals.com. All Manuals Search And Download.

SHOWVIEW -Recording

Example:You receive NBC on program position 12.

In case of the first S^HOWVIEW-recording for NBC, 2 bars

will blink at the CH-line. Enter 12 with number keys.

Press 1 and then 2 within 2 seconds (if the 2-press was

too late, the display 1 will be replaced with 2). The

S^HOWVIEW-system memorizes that the storing position

12 is for NBC. From the next all times of the SHOWVIEW-

recording from NBC, the 12 will be entered in the “CH”-

line automatically. In case of an erroneous input for the

VPS/PDC:

Switch the VPS/PDC on or off. Be sure to pay attention

to the VPS/PDC-important note on page 35.

Press

line.

repeatedly until you reach VPS/PDC-

Then press

or to select “ON” or “OFF”.

Press OK after the

confirmation. Then

press SET UP MENU

repeatedly until the TV-

picture appears.

15 TUE 17:30 18:00

------ --:--

--:--

-⁷-^V

------ --:--

--:--

channel number, press

to go in the “CH”-line and

enter the correct number again.

Press

or number

SELECT

EXIT

/ OK

SHOWVIEW NO . 327741029

To enter the other

program repeat the

steps 1 - 5.

: MENU

DATE

START

END

15 TUE

17:30

18:00

12 NBC

keys to enter the program

position number.

Then press

SPEED

VPS/PDC OFF

SELECT :

Press •. The clock symbol ( ) will appear on the

display and the VCR stands by for recording. At the

same time, VCR mode will change to DVD mode

automatically.You can use DVD even if the VCR is

in the Timer recording mode.

SET

/ 0–9

EXIT

: MENU

OK : OK

Setting a day of the week:

You have selected DAILY or WEEKLY in step 3, then

you can select recording date again.The date must blink

as 2 bars.

If you do not use the DVD, turn the power off.

The timer recording will start at 5 seconds before

the time you predetermined.

If it does not blink, then press

the DATE blinks. Then press

the desired date appears.

repeatedly until

Note:

• If the clock symbol ( ) does not appear on the

display in spite of the pressing of •, the cassette

may not have been loaded yet.(see page 22)

• If the cassette is ejected in spite of the pressing

of •, the erase prevention tab of the cassette may

have been removed. (see page 22)

The following date are stand for your selection: SUN-

SAT: all dates from Sunday to Saturday, or MON-SAT:

only dates from Monday to Saturday, or MON-FRI: only

dates from Monday to Fryday.WKL-MON:each Monday,

WKL-TUE: each Tuesday, ..., WKL-SUN: each Sunday.

• If the clock symbol ( ) blinks when the timer re-

cording ended, the TV program has not been com-

pletely recorded because of an insufficient tape sup-

ply. In this case, press • to cancel the timer pro-

gram or press EJECT to remove the cassette tape.

• During timer recording standby mode, the VCR

mode cannot be selected.To use the VCR, press

• at first, then press VCR to change toVCR mode.

After you use the VCR, press • again to put the

VCR into timer recording standby mode.

Change the recording start-time:

The recording start-time will be set by SHOWVIEW

automatically. However you can change the recording

start-time manually. The time near START must blink.

If it does not blink, press

time blinks. Then press

repeatedly until the

to change.

Recording period extension:

The recording end-time will be set by SHOWVIEW

automatically. However you can extend the recording

end-time manually. The time near END must blink.

• If you press • during timer recording, the record-

ing operation will be interrupted. If you press •

again within the programmed time, the recording

operation will start again.

If it does not blink, press

time blinks. Then press

repeatedly until the

to extend.

Select Tape speed:

Select the recording tape speed Standard Play (SP) or

Long Play (LP).

Press

Then press

repeatedly until you are in SPEED-line.

or to select “SP” or “LP”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer-Recording

Timer recording can be programmed

on the TV-screen with the remote

control. The built-in timer allows

automatic unattended recording of up

to 8 programs within 1 month.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

• Load a video cassette with the erase prevention tab intact. Make

sure with OSD that the time and date are correct. (see page 29).

Example: Timer recording for channel 1, 13:00 to 14:30 with Tape

speed LP on timer program number 1.

Press SET UP MENU. Press

ATS (AUTO TUNING SYSTEM)

to select TIMER REC SET.

TIMER REC SET

VCR EXTENSION

VCR SETUP

Then press OK.

CHANNEL SETUP

SYSTEM SETUP

SELECT

ENTER : OK

EXIT

: MENU

Each line stand for one program

of the 8 memories. Select one

------

--:--

-- -

--:--

------

-- -

line with

. Then press

------ --:--

SELECT :

EXIT : MENU

OK.

-- -

/ OK

Set the desired date with

TIMER REC SET

or number keys.Then press

to accept it.

DATE

START

END

23 MON

11:30

--:--

3 TV3

SPEED

VPS/PDC

OFF

SELECT :

SET

/ 0–9

EXIT

: MENU

Set the Starting time (13:00),

ending time (14:30), channel (1

ARD), Tape speed (LP) and

VPS/PDC (P.35) in the same way

as the step 3.

TIMER REC SET

DATE

23 MO

START

END

13:00

14:30

1 ARD

SPEED

VPS/PDC

SELECT :

• In case of an erroneous input

SET

EXIT

: MENU

OK : OK

press

to go back to before

step and enter again.

Note:

....to be continued to next page

In the event of a power failure the data of

the automatic recording will be maintained

in the built-in memory for about 30

minutes. Also, the clock will continue to

run for this period of time. Thereafter the

data will be deleted. When the power

resumes, the time display will change to

“--:--” that the timer setting will have to be

set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer-Recording

Press OK to accept them.

In case of Timer progarms-overlapping

13:00 14:30

---^M-^O--^N--:-- --:-- -¹-^V

------ --:-- --:-- --

• Do not overlap timer programs as portions of the con-

flicting programs will be lost. The first recording time

has priority over the next recording time as shown in

the diagram below.

To enter other programs,

repeat steps 2 through 4.

SELECT :

/ OK

• To return to the normal

screen, press SET UP

MENU twice.

EXIT : MENU

8 : 00

9 : 00

10 : 00

11 : 00

Program 1

Program 2

Deleted Parts

Press •. The clock symbol ( ) will appear on the

display and the DVD/VCR stands by for recording.

At the same time, VCR mode will change to DVD

mode automatically. You can use DVD even if the

VCR is in the Timer recording mode.

Program 3

Non Recorded Portion Parts

Recording

Control Settings

Prog.1

Prog.2

Prog.3

Note:

• The daily/weekly recording can be made continuously

until the recording is canceled or the tape reaches

the end.

• During timer recording the automatic rewinding

mechanism does not function.

If you do not use the DVD, turn the power off.

• If the clock symbol ( ) blinks in the display in

spite of the pressing of •, the cassette may not

have been loaded yet. (see page 22)

• If the cassette is ejected in spite of the pressing

of •, the erase prevention tab of the cassette may

have been removed. (see page 22)

Confirmation/Cancellation of the Timer

Recording

If the Timer has been activated, now press • to

deactivate the Timer. The clock symbol ( ) will

disappear.Then press VCR to change toVCR mode.

Note:

• In case of the timer recording from the scart socket,

proceed as follows: In step 4 press

repeat-

edly until the "CH" line blinks. Then press AUX re-

peatedly until "AV1" or "AV2" or "AV3" appears.

• If the clock symbol ( ) blinks when the timer record-

ing ended, the TV program has not been completely

recorded because of an insufficient tape supply.Press

• to cancel the timer program or press EJECT to

remove the cassette tape.

• During timer recording standby mode, the VCR mode

cannot be selected.To use the VCR, press • at first,

then press VCR to change to VCR mode. After you

use the VCR, press • again to put theVCR into timer

recording standby mode.

Press PROG. twice. All the

8 Timer memories will

appear.

15 TUE 17:30 18:00 7V SP

23 MON 13:00 14:30 1V LP

12:15 13:00

---^W--^E-^D--:-- --:-- --

------ --:-- --:-- --

SELECT :

CLEAR : CANCEL EXIT : MENU

/ OK

correct

the

TIMER REC SET

DATE

23 MO

13:00

14:30

programmed setting:

Press or to select the

program you wish to correct,

then press OK to enter the

program input mode. Then

START

END

ARD

SPEED

VPS/PDC

SELECT :

SET

/ 0–9

EXIT

: MENU

OK : OK

press

to select the

Timer Recording Special case

item you wish to correct.

Then correct the data with

Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.

MON-SAT: Monday to Saturday) Timer recording

Follow the procedure for timer recording on both pages

before. At picture 3 press

desired setting appears.Then press .When you press

or repeatedly, the indicator at DATE will change

as follows, in case today is Friday.

repeatedly until the

To cancel Timer program:

Press or to select the

written line. Then press

CANCEL. This line is now

canceled.

------ --:-- --:-- --

23 MON 13:00 14:30 1V LP

12:15 13:00

---^W--^E-^D--:-- --:-- --

------ --:-- --:-- --

One month later

minus one day

SELECT :

/ OK

EXIT : MENU

SUN-SAT

MON-SAT

25 FRI ..... 24 SUN

MON-FRI

WKL-FRI

Press SET UP MENU (or PROG.) repeatedly until

the TV-picture appears.

WKL-THU.....WKL-SAT

MON-SAT = everyday from

Monday fo Saturday.

WKL-SAT = each Saturday

TIMER REC SET

DATE

WKL-WED

START

END

11:30

--:--

ZDF

SPEED

VPS/PDC

SELECT :

SET

/ 0–9

EXIT

: MENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Detailed Description of the VPS/PDC Function

VPS/PDC is a service provided by the public TV station. When you select a VPS/PDC-compatible TV station and

activate the VPS/PDC function, the beginning and the end of the timer recording will be controlled by the TV

station. Any program air time delays will be taken care of.The private TV companies have not provided this service

yet. Thus, please turn OFF the VPS/PDC function when performing timer recordings of programs aired by private

TV stations.

Example: Assume you want to record a sports event that is scheduled to be aired from 21:00 to 23:00 and perform

your timer programming accordingly. However, the beginning of the sports event is postponed to 21:30 so that the

program will now end at 24:00. Using the VPS/PDC function, you can still make sure that the entire TV program is

recorded.

The user’s timer programming setting:

Actually, however, the sports event is aired from 21:30 to

24:00.

Recording without VPS/PDC function:

Recording with VPS/PDC function:

When you perform the timer programming be sure to observe the following points:

1.) Date and time should be correctly set.

The following points from 2 to 5 will be automatically taken care of by the ShowView feature.

Therefore, be sure to keep them in mind when doing recordings without the ShowView feature.

2.) Set the starting time precisely to the minute according to the data in the TV program magazine (not a

single minute earlier or later); otherwise an automatic recording will not be possible.

3.) If an additional 2nd time is specified in parentheses, which in most cases is explicitly stated as “VPS/PDC

time”, make sure to enter only this time data.

4.) The starting time of the subsequent TV program is considered to be the end time of the recording.

5.) If you program the recording of several subsequent TV programs, enter the start and end times sepa-

rately for each TV program. It is not sufficient to solely enter the start time of the first and the end time of the

last program (in this case only the first program will be recorded unless the VPS/PDC function is turned off).

Please look up in your TV program magazine which TV stations transmit the VPS/PDC signal. A VPS/PDC

on-screen indication (during auto search) does not mean that the respective TV station is actually VPS/PDC-

compatible. Therefore, make sure to turn OFF the VPS/PDC function if you want to make timer recordings of

programs aired by a station that is not VPS/PDC-compatible. Otherwise the TV program will not be recorded

in its entirety.

It is preferable to deactivate the VPS/PDC function even for VPS/PDC-compatibleTV stations — at least it

simplifies the programming procedure — if you want to record several programs of the sameTV station in

direct sequence.

For instance: at 20:00, recording of the “Tagesschau” news program,

subsequently, at 20:15, recording of a movie,

and subsequently, from 21:45 to 22:45, recording of a sports program.

Using the VPS/PDC function, enter the start and end times of each program

separately;however, if theVPS/PDC function is turned OFF, it will be sufficient

to enter the start time of 20:00 and the end time of 22:45.

Download from Www.Somanuals.com. All Manuals Search And Download.

NICAM/German A2 Stereo Recording and Playback

This DVD/VCR is capable of recording

sound in Hi-Fi system. The recording

will be performed automatically.

NICAM STEREO broadcasts are

recorded in its original sound system

regardless of the setting. If you wish

to record NICAM programmes, select

NICAM "AUTO" as follows.

And, this DVD/VCR can also receive

and record German A2 stereo

program.The tape recording is always

both in HiFi and in MONO on the

standard longitudinal track. In case of

bilingualTV programs always the two

audio channels will be recorded.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press VCR to select the VCR mode. (The VCR indicator will light)

NICAM stereo sound reception:

Press SET UP MENU. Press

ꢀ or M to select VCR SETUP.

Then press OK.

ATS (AUTO TUNING SYSTEM)

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

SELECT

ENTER

EXIT

Press ꢀ or M to select NICAM.

VCR SETUP

NICAM

AUDIO MIX

SHARPNESS

[AUTO]

[OFF]

Then press

or OK to

select [AUTO].

SELECT

ENTER : OK

EXIT

Press the SET UP MENU repeatedly until the TV picture

3 _appears.

NICAM programmes are divided into 4 types as

shown below.

NICAM STEREO broadcast

"NICAM ST" illuminates when a

NICAMSTEREObroadcastsignalis

NICAM ST

received.

NICAM MONO A broadcast

"NICAM M1" illuminates when a

NICAM MONO A broadcast signal is

NICAM M1

received.

NICAM MONO A B broadcast

"NICAM M1/2" illuminates when a

NICAM MONO A and MONO B

NICAM M1/2

broadcast signal is received.

Note:

When listening to a stereo broadcast or

playing back a tape Hi-Fi recorded in

stereo, you have to connect the DVD/

VCR with the stereo audio system or the

stereo TV. The sound which is output

from the RF OUT jack is monaural.

NICAM OFF

It will be displayed for the NICAM

signal when the "NICAM [OFF]" is

selected in menu screen.

NICAM OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

NICAM/German A2 Stereo Recording and Playback

German A2 stereo sound reception:

Stereo program indication

It will be displayed for approx. 4

seconds when stereo programs

are being received.

STEREO

Bilingual program indication

It will be displayed for approx.

4 seconds when bilingual pro-

grams are being received.

BILINGUAL

Playback

Use A.MONITOR to select under stereo/mono or bilingual

playback. See the table below for more information.

On-screen indications

(for 4 sec.)

Bilingual playback

performed as follows:

Stereo playback

performed in:

Simultaneously

both languages

from HiFi track

(Mixed sounds)

Stereo

Left channel signal One's mother

output from both

loudspeakers

tongue dubbing

(Main sound)

Right channel

Original sound

signal output from

both loudspeakers

track (Sub sound)

Mono

One's mother

tongue dubbing

(Main sound)

HiFi signal indication

It will be displayed for approx. 4

secondswhenplayingHiFivideo

cassette tapes.

Note:

WhenplayingHiFicassettetapesrecorded

on another VCR, the sound output may be

distorted. This is normal and no indication

ofaunitmalfunction.Trytominimizesound

distortions by using SET +/– or change to

MONO by pressing of A.MONITOR.

HI-FI

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Mixing

Preparation:

When playing audio dubbed video

tapes, press A.MONITOR to select the

sound you want to listen to. Press

A.MONITOR repeatedly until "MONO"

isdisplayedonthescreentolistenonly

to the dubbed sound. In case of the

other on-screen indications only the

original sound will be output. It is also

possibletolistentothedubbedandthe

original sounds simultaneously. To

accomplish this, set "AUDIO MIX" to

"[ON]" (see right). During playback,

press A.MONITOR repeatedly until

"STEREO" is displayed on the screen.

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.

Then press VCR to select the VCR mode. (The VCR indicator

will light)

Press SET UP MENU.

Press

VCR SETUP. Then press

ATS (AUTO TUNING SYSTEM)

to select

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

OK.

SELECT

ENTER : OK

EXIT

: MENU

Press

to select

2 _{AUDIO MIX.}

VCR SETUP

NICAM

AUDIO MIX

SHARPNESS

[AUTO]

[OFF]

SELECT :

ENTER : OK

EXIT

Press

or OK to select

VCR SETUP

3 _[ON].

NICAM

AUDIO MIX

SHARPNESS

[AUTO]

[ON]

If you select "[ON]", you can

listen to the dubbed and the

original sounds at the same

time.

SELECT :

ENTER : OK

EXIT

Press SET UP MENU repeatedly until the TV picture

4 _appears.

Note:

To deactivate the AUDIO MIX function

follow the above procedure from step 1 to

3, select "[OFF]", and confirm the setting

by pressing SET UP MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Duplicating a Video Tape

When you try to connect with a cable, make sure the power of both units have been turned off.

Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.

Load a blank cassette tape with the erase prevention tab

While holding 2, press

and then 4 of Recording unit.

1 _{intact into the recording DVD/VCR. Load the previously}

recorded cassette tape into the playback VCR or a video

camera.

Press PLAY-button and then PAUSE/STILL-button of

Playback unit. Now you can see the still picture of the

scene that you wish to duplicate.

VCR

Press 4 of both units simultaneously to start the Duplicat-

5 _ing.

Use AUX or PR of the recording DVD/VCR to select the

2 _{"A1", "A2" or "A3" instead of the preset channel.}

Note:

A1 = TV-RGB/Composite Scart Socket

A2 = VCR/DECODER Scart Socket

A3 = Front AV jacks

Beforestartingtheduplicatingprocess,selecttheproper

tape speed using

correct tape speed will be set automatically during

playback.

. For a pre-recorded tape the

Connection with second Video recorder or Video camera

VCR/DECODER

(not supply)

SCART socket

Playback on

camera

Playback unit

Recording unit

Playback unit

HR-XV1EU

TV-Scart socket

(not supply)

(not

supply)

SYSTEM SETUP

CLOCK SET

LANGUAGE/SPRACHE/LANGUE

AV2

[AV]

• Select the “AV2” in menu

screen in the same way as the

step 1~2 on page 14.

Then press OK to select AV

mode.

SELECT

ENTER

EXIT

(not supply)

Press AUX on the

recording unit repeatedly

until A3 appears.

Duplicating a disc material onto a video tape

You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.

If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “

” will appear

on the screen for approx. 4 seconds. See page 42 for more information about the DVD playback.

Preparation:

• Load a cassette tape with the erase prevention tab

intact.

During disc playback, while holding 2, press

• Select the tape speed in the VCR mode. (see P.28)

• Load a disc you wish to duplicate.

Note:

Press DVD to select the DVD mode. (The DVD indi-

cator will light)

You can set the duplicating time using the ITR-function.

At step 3 above press 2 repeatedly until the desired

duplicating time appears on the screen.(P.30)

Press

to start the disc playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc

This unit applies to DVD discs from Region 2 only.

The loaded Disc (DVD, Video-CD, Audio-CD and MP3-CD) will be recognized automatically.

The suitable Disc-formats are: DVD, CD-R and CD-RW.

Some CD-R/RW discs may be incompatible.

This DVD/VCR uses the PAL color system. The NTSC-DVDs can be playback on PAL 60Hz.

Do not play DVD-ROM, DVD-Audio, CDV, CD-G or Photo CD to prevent accidental erasure of prerecorded material.

Some DVDs is played back with a Copy guard system. In case of a dubbing on video tape, strong disturbance may

occur. This is not a defect of this DVD/VCR.

DVD DISC

Title

TITLE1

CHAPTER 1

TITLE2

When two or more movies are recorded on a disc,

the disc is divided into two or more sections. Each

section is called a “TITLE”.

CHAPTER 2

CHAPTER 1

CHAPTER 2

CHAPTER 3

Chapter

The titles can be subdivided into many sections.

Each section is called a “CHAPTER”.

Audio-CD

Track

TRACK

An Audio CD can contain several items.

These are assigned to the tracks.

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc.

Pick up the disc gently from the case.

• Do not scratch the disc.

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

Storing Disc

• Store the disc in the case to avoid risk of scratches, dirt or damage.

• Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

• Do not wipe the disc round.

• Do not use liquid or aerosol cleaners.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting setup language

The setup language can be selected.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.

• When using an amplifier, switch on the amplifier.

Press DVD to select the DVD

mode. (The DVD indicator will

light.)

“No Disc” will appear on the

screen. (If a DVD disc has al-

ready loaded, the playback will

No Disc

start automatically.)

PressSETUPMENU inthestop

mode. The SETUP MENU of

Picture

DVD will appear on the screen.

TV Shape 4:3LB

Video Out Select Video

Then press

to select

“Language”.

: Select

: Enter

Press

toselectOn-Screen

Language, then press OK (En-

ter).

Language

On-Screen Language ENG

Disc Menu Language ENG

Audio Language

Subtitle Language

ENG

: Select

: Enter

Press

to select desired

language: English (English),

German (Deutsch) or French

(Français).

Language

On-Screen Language ENG English

Disc Menu Language ENG Fran ais

Audio Language

Subtitle Language

ENG Espa ol

ENG

: Select

: Enter

To make the SETUP screen disappear, press SET UP MENU

(or RETURN).

If the DVD/VCR does not operate

properly: Static electricity, etc., may

affect the player's operation.Disconnect

the AC power cord once, then connect

it again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback procedure

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Press OPEN/CLOSE.

The disc tray will open.

Place a disc onto the tray.

2 _{Hold the disc, position it with the}

printed label side up, align it with

the guides, and place it in its

proper position.

Press

or OPEN/CLOSE.

The disc tray closes automati-

cally.

On the screen,

changes to

“

” and then playback will

commence.

• A menu screen may appear on

the TV screen, if the disc has

a menu feature. In this case,

press

or OK to

operate a menu feature.

Press 3 to end playback.

• The DVD/VCR memorizes the stopped point, depending on

the disc. “To Return To The Last Scene Viewed, Press Play. To

Disable This Operation, Press STOP Again.” appears on the

screen for approx. 4 seconds. “ ” will continue blinking in the

display until the playback is stopped completely. Press

resume playback (from the scene point).

• If you press 3 again (“ 3 ” appears on the screen) or unload

the disc, the DVD/VCR will clear the stopped point.

Then press OPEN/CLOSE.

5 _{The disc tray opens.}

Remove the disc and press

, (POWER).

The disc tray closes automatically and DVD/VCR turns off.

NOTES:

• If a non-compatible disc is loaded, "Please Check Disc", "Disc playback unauthorized Consult owners manual

for further information" or "Parental Lock" will appear on the TV screen according to the type of loaded disc. In

this case, check your disc again (See pages 40 and 50, 51).

• Some discs may take a minute or so to start playback.

• A “Prohibition” symbol

may appear at the upper right of the screen.This symbol means either the feature you

tried is not available on the disc, or the DVD/VCR can not access the feature at this time.This does not indicate

a problem with the DVD/VCR.

•

When you set a single-faced disc label downwards (ie. the wrong way up) and press

or OPEN/CLOSE, "

will appear and remain on the screen for approx. 30 seconds and then it will change to "Please Check Disc".

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays

DVDs according to the disc contents the software producers designed, some playback features may not be

available. Also refer to the instructions supplied with the DVDs.

• When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs.To avoid

possible damage to the audio system, the consumer should take proper precautions when the analog stereo

outputs of the DVD/VCR are connected to an amplification system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Special playback

Note: There may be a slight delay be-

tween pressing the button and the

function activation.

Fast Forward Playback

Press

during normal playback.

Each press of

will increase the speed of the search x2 ( ), x8

(

), x30 (

) are available)

), x100 (

). (in case of Audio-CD: x4 ( ) and x8

• To resume normal playback, press

Review Playback

Press

during normal playback.

Each press of

will increase the speed of the search x2 ( ), x8

), x100 ( ). (in case of Audio-CD: x4 ( ) and x8

(

), x30 (

) are available)

• To resume normal playback, press

Still Playback

Press 4 during normal playback.

To resume normal playback, press

Frame Advance

Press 4 during still playback.

One frame is advanced each time

you press 4.

To resume normal playback, press

Slow-motion Playback

Press SLOW during normal playback or still playback.

Each press of SLOW will change the speed of the slow x1/2, x1/4,

x1/8.

NOTES:

• The unit is capable of holding a still

video image or On screen display image

on your television screen indefinitely. If

you leave the still video image or On

screen display image displayed on your

TV for an extended period of time, you

risk permanent damage to your

television screen. Projection televisions

are very susceptible.

• To resume normal playback, press

• To resume the still playback, press 4.

Locating a chapter or track

Press SKIP (

) Forward or SKIP

(

) Reverse during playback to

• Some titles may not display chapter

numbers.

locate a chapter or track that you

want to watch.

Each time you press the button, a

“C (chapter)” number or “T (track)”

number is skipped.

• When you set “Title Stop” to “Off” (See

page 57), you can access chapter in

another title. If you go back to the

preceding title by pressing the SKIP, the

DVD/VCR locates the first chapter of the

title. When “Title Stop” is set to “On”.

you can access chapters only within the

current title.

When you press SKIP (

), playback starts from the beginning

of the current chapter or track.

When you press SKIP (

) twice, playback starts from the

beginning of the preceding chapter or track.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Picture Signal Selection/Zooming

Preparation:

You can select the output signal of

DVD playback picture to the TV

screen as an VIDEO signal or a RGB

signal.

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.

Then press DVD to select the DVD mode. (The DVD indicator

will light)

Press SET UP MENU in the

stop mode.

Picture

TV Shape 4:3LB

Video Out Select Video

Press

ture”, then press

to select “Pic-

or to

select “Video Out Select”.

: Select

: Enter

Press OK (Enter).

Press

to select the

Picture

desiredpicturesignal,“Video”

or “RGB”.

TV Shape 4:3LB

Video Out Select Video

Video

RGB

: Select

: Enter

To make SETUP screen disappear, press SET UP MENU.

Note:

• If you use the connection with S-Video cord, be sure to set the

“Video Out Select” at step 2 above to “Video”. If you select

“RGB”, the TV screen will be disturbed.

• If you selected “RGB” at step 2 above, press TV/VCR to select

VCR. (VCR indicator will appear on the display) Otherwise,

the TV screen will be disturbed when you select the channel

with TV’s CHANNEL UP/DOWN buttons.

Zooming

This unit will allow you to zoom in on the frame image. You

can then make selections by switching the position of the

frame.

PressZOOMduringplayback.

1 _{The center part of the image}

will be zoomed in.

As you repeatedly press the

ZOOM

EXIT

OKorZOOMwhile“ZOOM”is

selected, the magnification

levelchanges.Variationofthe

Zoom Off

: Select

: Change

levels includes image reduc-

tion.

Note:

Press

to view a different part of the frame.

2 _{You may move the frame from the center position to UP,}

• Picture Signal Selection is only avail-

able for connecting with a 21 pin Scart

Cable.

DOWN, LEFT or RIGHT direction.

• Depending on your TV, NTSC disc may

not playback correctly in colour. In this

case, it is recommended to select the

Picture Signal RGB on step 2.

• Only use RGB setting if your TV is RGB

compatible.

• If you select “EXIT” and press the OK, you can turn off the

symbol mark, keeping the current magnification level.

• Press CANCEL to restore the zoom point to the center

of the picture.

While “ZOOM” is selected, press ZOOM repeatedly to re-

turn to a 1:1 view.

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat playback

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.

Then press DVD to select the DVD mode. (The DVD indicator

will light)

REPEAT PLAYBACK

Press PLAY MODE repeatedly to select “Chapter Repeat”,

1 _{“Title Repeat” or “All Repeat”. (In case of CD, select “Track}

Repeat” or “ ALL Repeat” )

DVD

Chapter Repeat

Track Repeat

During playback repeat playback will start automatically.

To start repeat playback during stop mode, press

about 5 seconds after you press PLAY MODE.

• To resume normal playback, press PLAY MODE repeatedly

until “Off” appears on the TV-screen.

within

A-B Repeat Playback

A-B repeat playback allows you to repeat material between two

selected points.

Press REPEAT A-B during

playback.

The start point is selected.

Press REPEAT A-B again.

The end point is selected.

Playback starts at the point that

you selected. Playback stops at

the end point, returns to Point A

automatically, then starts again.

-B

To resume normal playback,

press REPEAT A-B again.

NOTES:

•

Some discs may not work with the

repeat operation.

“Repeat Off” appears on the screen.

In A-B repeat mode, subtitles near

point A or B may not appear.

During the A-B Repeat Playback the

ANGLE feature will not operate.

You may not be able to set A-B Re-

peat, depending on the scenes of the

DVD.

•

A-B repeat does not work with an in-

teractive DVD and MP3-CD.

Random playback can not be com-

bined with Repeat playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Memory playback/Random playback

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Memory playback

You can arrange the order of titles, chapter or tracks on the disc.

Press MEMORY.

In stop mode

In playback

T:-- CT:---

Memory

: Select 0-9 : Input

: Play

: Select 0-9 : Input

: Play

Press

In stop mode

In playback

select “T” Title

number or “CT”

Chapter or Track

number. Use

number keys to

Input the favorite

number.

T:01 CT:002

T:-- CT:---

T:01 CT:002

Memory

: Select 0-9 : Input

: Play

: Select 0-9 : Input

: Play

• If you input a large number than the number that is recorded

on the disc, the bar will be skipped.

• The input number into "T" for CD or MP3 is not effective.

Press or OK.

Set the “T” and

“CT” in the next

bar as In step 2.

In stop mode

In playback

T:01 CT:002

T:02 CT:004

T:-- CT:---

T:02 CT:004

Memory

: Select 0-9 : Input

: Play

: Select 0-9 : Input

: Play

• When you select another chapter In the same title, you do

not need to select the title number.

• To cancel the programmed selection, press CANCEL.

Press

to start MEMORY playback.

• To resume normal playback, press CANCEL.

Random playback

Press PLAY MODE repeatedly to select “ Chapter Random”

or “Title Random”.(In case of CD, select Track Random)

NOTES:

The memory playback is cancelled

•

DVD

when press

playback.

during memory

• Random playback can not be

combined with Repeat playback.

• You can program up to 30 selections

into the memory.

Chapter Random

Track Random

• Depending on the DVD, Chapter

Random operation may not work

during playback.

• You cannot use the random playback

with memory playback.

During playback random playback will start automatically.

To start random playback during stop mode, press

about 5 seconds after you press the PLAY MODE.

• To resume normal playback, press PLAY MODE repeatedly

until “Off” appears on the TV-screen.

within

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 Playback

This player can play back the MP3-data

which has been recorded on CD-R or CD-

RW. To produce the MP3-data, you need a

Windows-PCwithCD-ROMdriveandaMP3-

encoding Software (not supplied).

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.

Then press DVD to select the DVD mode. (The DVD indicator

will light)

The Apple-HFS-System can not be played.

Press OPEN/CLOSE.

The disc tray will open.

Place a disc onto the tray.

MP3 CD Information

Limitations on MP3 CD playback

• MP3 CD is the disc that is standardized by

ISO9660, its file name must include 3-digits

extension letters, “mp3”.

• The directory and file names of the MP3

CD must correspond to the ISO

Press

or OPEN/CLOSE. The

disc tray closes automatically. On

the TV-screen, “ ” and then

reading file number will appear.

Then playback will commence.

• Reading will take as much time

as the number of file.

standardized files.

• This unit can read 200 files per disc. If

one directory has more than 200 files, it

reads up to 200 files, the remaining files will

be omitted.

• As for multi-session disc, only the first

session can be played.

• If the CD has both audio tracks and MP3

files, only audio tracks are played.

• It may take more than one minute for this

unit to read MP3 files depending on its

structure.

• Press 3 to end playback.

Press OSD.

MP3

000:23

Then press

to select

MP3

EAM

and press OK (Enter).

PCM

: Select

: Enter

• Music recorded by “Joliet Recording

Specification” can be played back, the file

name is displayed (within 8 letters) on the

screen. Long file names will be condensed.

• The music files recorded by “Hierarchical

File System” (HFS) cannot be played.

Press

to select the desired track, then press

4 _{OK (Enter). Track is selected and play commences.}

•

In case the folder includes more than 9 tracks, press

to display next track list.

• To remove track list, press CANCEL.

• Press to select “T” and press number keys to

input your desired track.

Limitations on display

The maximum number for display is 8

letters. Available letters for display are the

following: capital or small alphabets of A

through Z, numbers of 0 through 9, and _

(under score).

MP3

000:23

1. \ CRYINI

2. \ DANGER

EAM

3. \ GITARREN

4. \ LILYWA

PCM

5. \ MERCYS

6. \ OBSESS

7. \ PINKPA

8. \ RUNNIN

Notes on MP3 files

: Select

: Search

To play back MP3 CD in the recorded order,

1. Use MP3 software that records data

alphabetically or numerically.

2.Name each file including a two-digit or three-

digit number (e.g. “01” “02” or “001” “002”).

3. Refrain from making too many sub-folders.

Press 3 to end playback.

• The unit records the stopped track.

Press

track).

to resume playback (from the beginning of

• If you press 3 again or unload the disc, the unit will clear

the stopped track.

CAUTION:

• Some MP3 CDs can not be played back

depending on the recording conditions.

• The CD-R/RW that has no music data or

non-MP3 files can not be played back.

Press OPEN/CLOSE.

The disc tray opens.

Remove the disc and press

The disc tray closes automatically and DVD/VCR turns off.

NOTES:

•

During MP3-Playback, you can not use SEARCH, A-B

Repeat functions.

•

You can use Repeat(Track or All) and Random functions for

MP3 CD Playback.(See page 45 and 46)

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing soundtrack language / Changing Subtitles language

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Changing soundtrack language

You can select the language when you play a multilingual disc.

Press A.MONITOR during play-

back.

Thecurrentsoundtracklanguage

is displayed.

ENG1

ENG2

FRE1

2CH

5.1CH

2CH

Audio:FRE1

: Select

2CH

: Return

2CH

Press A.MONITOR repeatedly

2 _{until the desired language is se-}

ENG1

ENG2

FRE1

2CH

5.1CH

2CH

lected.

The on-screen display will disap-

pear after a few seconds.

• To turn off the soundtrack

setting display, press the

CANCEL or OK button.

Audio:ENG1

: Select

2CH

: Return

In case of VIDEO CD playback

AudiotypechangesasfollowseachtimeyoupressA.MONITOR.

NOTES:

• If the desired language is not heard after

pressing A.MONITOR several times, the

language is not recorded on the disc.

• Changing soundtrack or subtitle

language is cancelled when you open the

disc tray or turn the power off.The initial

default language or available language

will be heard and seen if the disc is

played back again.

Changing Subtitles language

You can select the language when playing back a disc recorded

with multi-lingual subtitles.

Press SUB TITLE during

playback.

Off

GER 1

Then press

to select the

DUT

•

Depending on the DVD you may be

unable to turn on, turn off, or change the

subtitles, even if they are recorded on the

disc. While playing the DVD, the subtitle

may change while opening or closing the

disc tray, or while changing the title.

During some scenes, the subtitles may not

appear immediately after you select“On”.

desired language.

• To turn off the subtitle setting

display, press the CANCEL

or OK button.

Subtitle:--- Off

: Select

: Return

• To turn the subtitles off, select

“Off”.

•

Press SUB TITLE repeatedly to

turn Subtitles on or off.

• The abbreviation of the language

appears instead of the language name.

Refer to the list of languages and their

abbreviations. (See on page 61.)

Off

ENG 1

SPA 1

FRE 1

Subtitle:ENG1 On

: Select

: On/Off

: Return

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing angles / Title selection / DVD menu

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Changing Angles

When playing back a disc recorded with multi-angle facility, you

can change the angle that you are viewing the scene from.

Press ANGLE during playback.

The current angle will appear.

Angle :1

: Select

: Return

Press ANGLE or

selected.

• To turn off the angle number display, press the CANCEL.

• You can change the camera angle directly by pressing the

number keys corresponding to its angle number instead of

repeatedly until the desired angle is

using the

buttons.

Title Selection

Two or more titles are recorded on some discs. If the title menu

is recorded on the disc, you can select the desired title.

Press TITLE during playback.

Title menu appears on the screen.

• Press TITLE again to resume playback at the scene

when you pressed TITLE.

Press

to select the desired title.

Press OK or

The playback of the selected title will start.

DVD Menu

Some DVDs allow you to select the disc contents using the

menu.

When you play back these DVDs, you can select the subtitle

language and sound-track language,etc. using the DVD menu.

Press DVD MENU during playback.

The DVD menu appears on the screen.

NOTE:

• Press DVD MENU again to resume playback at

the scene when you pressed DVD MENU.

Depending on the DVD, you may not

be able to change the angles even if

multi-angles are recorded on the disc,

or you may be unable to select the title,

and a “title menu” may simply be called

a “menu” or “title” in the instructions

supplied with the disc.

Press

to select the desired item.

Press OK.

The menu continues to another screen. Repeat steps 2 and 3 to

set the item completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental control

Somediscsarespecifiednotsuitable

for children. Such discs can be

prevented from play back with the

unit.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Parental control setting

PressSET UP MENU in the stop

mode.

Picture

Press or to select “Opera-

TV Shape 4:3LB

Video Out Select

tion”.

: Select

: Enter

Press

to select

“Parental Lock”, then press OK.

Operation

Pause/Still

Auto Off

Parental Lock

Title Stop

PBC

Off On

Off

: Select

: Enter

Press

to select Off or On.

Off: The parental lock feature

does not function.

Operation

Pause/Still

Parental Lock

Title Stop

PBC

Auto Off

Off On

Off

After pressing OK (Enter),

follow step 4 and 6 below.

On: To activate the parental lock

feature or change the

setting, press OK (Enter)

and follow steps 4-6 below.

: Select

: Enter

Press number keys to input a

4-digits security code then

press OK.

• If you input a wrong number,

press CANCEL.

Operation

Pause/Still

Parental Lock

Title Stop

Auto Off

Off On

Off

Security Code ----

PBC

• To return to the before step,

press RETURN.

: Select

: Enter

NOTES:

Enter the code of a country/area

whose standards were used to

rate the DVD disc. (See the list

on the page 51)

• If each setup (page 50~59) has been

completed, the unit can always be

worked under the same conditions

(especially with DVD discs).

Each setup will be retained in the

memory if you turn the power off.

• Depending on the discs, the unit can-

not limit playback.

Operation

Pause/Still

Parental Lock

Title Stop

Auto Off

Off On

Off Area Code

D E

PBC

Example: Set to DE (GERMANY).

: Select

: Enter

Press

press

to select “D” then

to move to the right

• Some discs may not be encoded with

specific rating level information though

its disc jacket says "adult". For those

discs, the age restriction will not work.

• Do not forget the security code. If you

forget the security code, delete it. (See

step 7 on next page)

character.Then select “E” same

as above. Then press OK (En-

ter).

Download from Www.Somanuals.com. All Manuals Search And Download.

Parental control

Country/Area

AUSTRALIA

BELGIUM

CANADA

Code

Country/Area

NETHERLANDS

NORWAY

PHILIPPINES

RUSSIAN FEDERATION

SINGAPORE

SPAIN

Code

CHINA

CHINA HONG KONG

DENMARK

FINLAND

SWEDEN

FRANCE

SWITZERLAND

TAIWAN

THAILAND

UNITED KINGDOM

UNITED STATES

GERMANY

INDONESIA

ITALY

JAPAN

MALAYSIA

Press

to select the paren-

tal lock level, then press OK (En-

ter).

Operation

Pause/Still

Parental Lock

Title Stop

Auto Off

Off On

Off Area Code

D E

PBC

On Level

: Select

: Enter

You cannot play DVD discs rated higher than the level you selected

unless you cancel the parental lock function.

For example, when you select level 7, discs rated higher than level

7 are locked out and cannot be played.

• Level 1: DVD software for adults cannot be played back.

• Level 8: All DVD software can be played back.

• Select from the level 1 to level 8.The limitation will be more severe

as the level number is lower.

To make the SETUP screen disappear, press SET UP MENU.

To change the parental lock level

Follow steps 1- 6.

To change your 4-digit security code

1) After selecting “On” or “Off” at step 3 press 3 four times, then

press OK (Enter).

The 4-digit security code is deleted.

2) Press number keys to create a new 4-digit security code at step4.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting menu language

You can select the language of the

disc menu messages of DVDs.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Press SET UP MENU in the stop

mode.

Picture

TV Shape 4:3LB

Press

to select “Lan-

Video Out Select Video

guage”.

: Select

: Enter

Press

Menu Language”.

to select “Disc

Language

On-Screen Language ENG

Disc Menu Language ENG

Audio Language

Subtitle Language

ENG

: Select

: Enter

Press OK (ENTER).

Press

desiredlanguage,thenpressOK

to select your

Language

On-Screen Language ENG English

Disc Menu Language ENG French

(ENTER).

Audio Language

ENG German

ENG Others

Subtitle Language

Code D E

: Select

: Enter

English, French, German

The selected language is the first-priority Menu language.

Others: Other languages can be selected (See the Table of

languages on page 61).

Example:

Set to DE (GERMANY).

Press

to select “D” then press

to move to

the right character. Then select “E” same as above.

Then press OK (ENTER).

To make the SETUP screen disappear, press SET UP MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting audio soundtrack language

Thesameaudiosoundtracklanguage

Preparation:

can always be selected by your unit

even if you replace the disc or turn

the power off.

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Press SET UP MENU in the stop

mode.

Picture

TV Shape 4:3LB

Press

to select

Video Out Select Video

“Language”.

: Select

: Enter

Press

Language”.

to select “Audio

Language

On-Screen Language ENG

Disc Menu Language ENG

Audio Language

Subtitle Language

ENG

: Select

: Enter

Press OK (Enter).

Press or to select your

desired Audio Language, then

Language

On-Screen Language ENG English

Disc Menu Language ENG French

press OK (Enter).

Audio Language

ENG German

ENG Others

Subtitle Language

Code D E

: Select

: Enter

English, French, German

The language you have selected will play if it is recorded on

the disc.

Others: If you want to select another language, enter the lan-

guage code (See theTable of languages on page 61).

Example:

Set to DE (GERMANY).

Press

to select “D” then press

to move to

the right character. Then select “E” same as above.

Then press OK (Enter).

To make the SETUP screen disappear, press SET UP MENU.

NOTES:

• If the selected language is not re-

corded on the disc, the original lan-

guage will be heard.

• Some DVD discs may be played in a

different language than you selected.

A prior language may be programmed

on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting subtitle language

The same subtitle language can

always be selected even if you replace

the disc or turn the power off.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Press SET UP MENU in the stop

mode.

Picture

TV Shape 4:3LB

Press

to select

Video Out Select Video

“Language”.

: Select

: Enter

Press

Language”.

to select “Subtitle

Language

On-Screen Language ENG

Disc Menu Language ENG

Audio Language

Subtitle Language

ENG

: Select

: Enter

Press OK (Enter).

Press or to select your

desiredlanguage,thenpressOK

Language

English

On-Screen Language ENG French

Disc Menu Language ENG German

Audio Language

Subtitle Language

ENG No Subtitle

(Enter).

ENG

Others

Code D E

: Select

: Enter

English, French, German

The subtitle is displayed with the selected language if it is

recorded on the disc.

No Subtitle:

Subtitles do not appear.

Others: If you want to select another language, enter the

language code (See the Table of languages on

page 61).

Example: Set to DE (GERMANY).

Press

to select “D” then press

to move to

the right character. Then select “E” same as above.

Then press OK (Enter).

NOTES:

To make the SETUP screen disappear, press SET UP MENU.

• If the selected language is not recorded

on the disc, the first-priority language is

selected.

• Some DVD discs may be set to display

Subtitles in a different language than

you selected. A prior subtitle language

may be programmed on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the aspect ratio of TV screen / Setting on Screen display

You can select the aspect ratio for

your TV.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Setting the aspect ratio of TV screen

Press SET UP MENU in the stop

mode.

Picture

TV Shape 4:3LB

Press

or to select

Video Out Select Video

“Picture”, then press

to select “TV shape”.

: Select

: Enter

Press OK (Enter).

2 _Press

to select your

Picture

TV Shape 4:3LB

4:3 Letterbox

4:3 Normal

desired screen type.

Video Out Select Video

16:9 Widescreen

: Select

: Enter

You have the following screen sizes to choose from:

4:3 Letterbox:

Select when a standard 4:3 TV is connected.

Displays theatrical images with masking bars above and below

the picture.

4:3 Normal:

Select when a standard 4:3 TV is connected.

Displays pictures cropped to fill your TV screen. Either or both

sides of the picture are cut off.

16:9 Widescreen:

Select this mode when connecting to a wide-screen TV.

A wide screen picture is displayed full size.

To make the SETUP screen disappear, press SET UP MENU.

Setting on Screen display

Press SET UP MENU in the stop

mode.

NOTES:

• The displayable picture size is preset on

the DVD video disc. Therefore, the

playback picture of some DVD video

discs may not conform to the picture size

you select.

• When you play DVD video discs re-

corded in the 4:3 picture size only, the

playback picture always appears in the

4:3 picture size regardless of the TV

shape setting.

Display

On-Screen Displays On

Press

to select “Display”

to select “On-

Background

Screen Saver

Picture

Press

2 _{Screen Displays”.}

: Select

: Enter

Press OK (Enter).

Press

to select “On” or

Display

On-Screen Displays Off

“Off”.

Off

Background

Screen Saver

Picture On

• If you select “16:9 widescreen” and you

own a 4:3 TV set, the DVD playback

picture will be horizontally distorted dur-

ing playback. Images will appear to be

horizontally compressed. Always be

sure that yourTV shape conforms to the

actual TV in use.

On: Operational modes (e.g.

“ ”, “ ”) appear when you

press the buttons (factory

setting).

: Select

: Enter

Off: Operational modes (e.g. “ ”, “ ”) do not appear when

you press any buttons.

^{To make the SETUP screen disappear, press SET UP MENU.}55

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Audio

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided toVCR/DVD.Then

press DVD to select the DVD mode. (The DVD indicator will light)

Audio Out Select

Select the output sound format corresponding to your system connection.

For details of sound recording systems, see on page 59.

Press SET UP MENU in the stop mode.

1 _Press

to select “Audio”.

Audio

Audio Out Select

Dynamic Range Control On

Karaoke Vocal

Bitstream

Analog 2ch

PCM

Press

to select “Audio Out

2 _{Select”, then press OK (Enter). Press}

to select your desired output

: Select

: Enter

sound.

Bitstream:

Select when connected to an amplifier equipped with a Dolby

Digital, DTS, MPEG1 or MPEG2 decoder. The DVD/VCR outputs

digital audio information in the bitstream format when you play a

DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or

MPEG2 recording system.

Analog 2ch: SelectwhenconnectedtoaTV, DolbyProLogicorstereosystem

via the analog audio jacks.

PCM:

Select when connected to a 2 channel digital stereo amplifier.

The DVD/VCR outputs sounds in the PCM 2ch format when you

play a DVD video disc recorded on the Dolby Digital. MPEG1 or

MPEG2 recording system.

3 _{To make the SETUP screen disappear, press SET UP MENU.}

Dynamic Range Control

Turn on or off a function that makes faint sounds easier to hear

even if you lower the volume during late hours playback.

Press SET UP MENU in the stop

1 _mode.

Audio

Audio Out Select

Dynamic Range Control On

Karaoke Vocal

Bitstream

Off

Press

to select “Audio”.

to select “Dynamic

Off

Press

2 _{Range Control”, then press OK (Enter).}

: Select

: Enter

Press

to select “On” or “Off”.

Off: Fulldynamicrangeismaintained.

On: Dynamic range is reduced.

To make the SETUP screen disappear,

3 _{press SET UP MENU.}

NOTES:

• The Dynamic Range Control function

works only during playback of Dolby

Digital recorded discs.

Karaoke Vocal

Turn on or off the vocal output during DVD KARAOKE disc

playback.

• The level of Dynamic Range Control

may differ depending on the DVD video

disc.

• The vocal output feature is used during

playback of Dolby Digital (multi-channel)

recorded DVD KARAOKE discs. This

feature allows you to turn off vocal audio

tracks, or restore them for background

accompaniment.

PressSETUPMENU inthestopmode.

Audio

Audio Out Select

Dynamic Range Control On

Karaoke Vocal

Press

to select “Audio”.

Bitstream

Off

Press

to select “Karaoke

Vocal”, then press OK (Enter).

Press or to select “On” or “Off”.

: Select

: Enter

Off: The primary vocal is not output.

On: Theprimaryvocalisoutputwhen

it is recorded on the disc.

• When playing KARAOKE, connect the

appropriate audio equipment such as an

amplifier to the DVD player.

To make the SETUP screen disappear, press SET UP MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Operation

Preparation:

PBC

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to

VCR/DVD. Then press DVD to select the DVD mode.

(The DVD indicator will light)

Press SET UP

MENU in the stop

Picture

mode.

TV Shape 4:3LB

Video Out Select Video

Press

or to

Pause/Still

Select the resolution of still pictures.

select “Operation”.

: Select

: Enter

PressSETUPMENU

in the stop mode.

Picture

TV Shape 4:3LB

Video Out Select Video

Press

(Enter).

to select “PBC”, then press OK

to select “On” or “Off”, then press

Press or

select “Operation”.

Press

OK (Enter).

: Select

: Enter

Press

select “Pause/Still”,

then press OK

Operation

Pause/Still

Parental Lock

Title Stop

PBC

Auto

Off

Operation

Pause/Still

Parental Lock

Title Stop

PBC

Auto

Off

Auto

Frame

(Enter). Press

to select “Auto”

or “Frame”, then

press OK (Enter).

: Select

: Enter

: Select

: Enter

Off: When playing a VIDEO CD without using

the menu.

On: To use the menu when playing a PBC-