JVC DVD Recorder LYT1942 001A User Manual

ENGLISH  
ESPAÑOL  
CU-VD50U  
DVD Burner  
INSTRUCTIONS  
Grabador de DVD  
MANUAL DE INSTRUCCIONES  
For Customer Use:  
Enter the Model No. and Serial  
No. (located on the bottom of the  
burner) below. Retain this  
information for future reference.  
Model No.  
Serial No.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions for Accessories  
(For owners in the U.S.A.)  
When using the AC adapter, the power cord, and the  
USB cable, be sure to observe the following  
precautions. Failing to do so may result in electric  
shock, fire, injury, or malfunction.  
Changes or modifications not approved by JVC could  
void the user’s authority to operate the equipment.  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful  
interference in a residential installation. This  
equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Do not insert or remove the plug when your hands  
are wet.  
Fully insert the plug into the outlet.  
Keep dust and metal objects away from the plug.  
Do not damage the cord.  
EN  
ES  
Place the cord where it will not trip someone up.  
Do not use when thunder can be heard.  
Do not dismantle.  
Do not use for any product other than this one.  
Do not play the provided CD-ROM with an audio  
player. Doing so may damage the circuits or speakers.  
Safety Precautions for Discs  
Do not use the following discs.  
Cracked discs  
Deeply scratched discs  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/ TV  
technician for help.  
Installation  
Do not install in any of the following locations.  
Humid location  
Location of 60 °C or above  
Location subject to direct sunlight  
Location where overheating is likely  
Dusty or smoky locations  
Locations subject to oily smoke or steam such as a  
kitchen counter or beside a humidifier  
Unstable location  
(For owners in Canada)  
FOR USE WITH MODEL NO. AP-V50U  
(AC ADAPTER).  
POUR UTILISER AVEC MODELE AP-V50U  
(ADAPTATEUR C.A.).  
This Class B digital apparatus complies with Canadian  
ICES-003.  
Bathroom  
Dusty places  
Cet appareil numérique de la classe B est conforme à  
la norme NMB-003 du Canada.  
Slanted location  
ATTENTION:  
On placing the unit:  
Some TVs or other appliances generate strong  
magnetic fields. Do not place such appliances on top  
of the unit as it may cause picture disturbance.  
The C/B button does not completely shut off mains  
power from the unit, but switches operating current on  
and off. ABB shows electrical power standby and ACB  
shows ON.  
When moving the product:  
Press C/B to turn off the power, and wait at least 30  
seconds before unplugging the power cord. Then, wait  
at least 2 minutes before moving the product.  
Safety Precautions for the Burner  
Be sure to observe the following precautions. Failing to  
do so may result in electric shock, fire, injury, or  
malfunction.  
Do not disassemble, dismantle, or modify the  
equipment. Requests for repair and inspection should  
be made to the dealer.  
Do not insert metal or combustible objects or pour  
water or other liquids inside the burner.  
Turn off the power when connecting equipment.  
Remove the plug when the burner will not be used for  
a prolonged time or prior to cleaning (electricity flows  
through the equipment even when the power is off).  
Do not block the ventilation holes of the burner.  
Do not use where there is condensation. Suddenly  
carrying the burner from a cold location to a hot  
location may result in the formation of drops, which  
may cause a malfunction or failure.  
Do not cause the burner to vibrate when discs are in.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Guide  
Getting Ready to Copy to a DVD!  
A Get ready a recommended disc  
Use DVD-R, DVD-RW or DVD-R DL disc of the brands listed below.  
DVD+R, DVD+RW and DVD-RAM discs cannot be used.  
DVD-R DL (Single-  
sided double layer)  
DVD-R  
DVD-RW  
JVC, TDK,  
Verbatim, SONY  
JVC  
JVC, Verbatim  
Brand  
• DVD-R DL (single-sided double layer) discs can be used only when the  
burner is connected to a high definition Everio camera.  
• Use a commercially available cleaning cloth to wipe the disc gently if  
there are any fingerprints or dirt. Applying too much strength will result in  
scratches.  
Caution  
• Do not use discs that are scratched.  
B Connect  
Insert the connector with the  
protrusion to the burner.  
Protrusion  
Use the AC adapter to  
power on the Everio  
To DC jack  
USB cable  
Power button  
To DC jack  
CU-VD50  
Everio  
Power lamp  
C Press the power button to turn on the burner  
• The power lamp changes from blinking orange to steady orange.  
• When an AVCHD disc (P. 15) is inserted into a device that is not AVCHD-  
compatible, you may not be able to eject the disc. To eject the disc, refer to the  
instruction manual of your device.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
D Open the tray and insert the disc  
• The tray cannot be opened/closed when the burner is off.  
Caution  
A Press the eject  
button.  
B Pull out  
completely.  
C Insert firmly into  
place.  
E Close the tray  
• Push in until the tray snaps in.  
F Open the LCD monitor  
• The Everio camera turns on.  
• The power lamp on the burner  
changes from orange to green light.  
An hourglass ( ) is displayed when  
the burner is recognizing the disc.  
When completed, the following screen  
appears.  
6)$%/  
#2%!4% &2/- !,,  
3%,%#4 !.$ #2%!4%  
0,!9"!#+  
&).!,):%  
3%,%#4  
3%4  
Pay attention to the following!  
• Do not touch the  
recording side  
• Do not place any  
objects on top  
• Do not topple  
• Do not subject to  
mechanical shock  
¹ Recording or playback may not function properly if the disc is scratched  
or dirty.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Copying Videos to a DVD  
Operate on the Everio camera.  
¹ Depending on the model connected, the on-screen display may differ from those  
shown below.  
Select  
(move up-down)  
Confirm  
(push in)  
A Select “CREATE FROM ALL”  
D Select “Yes”  
ALL SCENES  
VIDEO  
CREATE FROM ALL  
SELECT AND CREATE  
PLAYBACK  
DO YOU WANT TO MAKE  
AN AUTOMATIC HEADLINE ON  
THE DISC TOP MENU?  
FINALIZE  
Yes  
No  
SELECT  
SET  
SELECT  
SET  
-%.5ꢀ TOP  
E Select “EXECUTE”  
B Select “ALL SCENES”  
CREATE FROM ALL  
ALL SCENES  
ALL SCENES  
ꢄꢅ  
ꢁꢄꢄꢅ  
UNSAVED SCENES  
$6$ ꢁ  
EXECUTE  
CANCEL  
SELECT  
SET  
-%.5ꢀ TOP  
SELECT  
SET  
-%.5ꢀ TOP  
C Select “OK”  
F Press “OK”  
ALL SCENES  
ALL SCENES  
QUANTITY REQUIRED  
$6$ꢀ ꢁ ꢂ $6$ꢃ$, ꢀ  
COMPLETED  
PREPARE AN EMPTY DISC  
OK  
OK  
RETURN  
SELECT  
SET  
-%.5ꢀ TOP  
SET  
Copy completed!  
• Do not turn off the power or remove the USB cable while the the hourglass or the  
copy in progress screen is displayed.  
You can also choose to copy your favorite scenes. For details, refer to the  
instruction manual of the Everio camera.  
Note  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Videos Stored on the DVD  
A Connect this burner to the TV  
Connect to the TV  
TV  
with an Audio/Video  
cable.  
Red  
White  
Yellow  
To DC jack  
Red  
White  
Yellow  
Power lamp  
Remove the USB  
cable  
• For details, refer to “Connecting to the TV” (P.12, 13).  
B Remove the USB cable  
• The power lamp on the burner changes as follows.  
Green Blinking orange Orange  
• When the USB cable is removed, the playback navigator appears automatically.  
(About 40 seconds.)  
(Playback navigator screen on the TV)  
1/2  
• An unfinalized disc  
Caution  
cannot be played back  
properly. Refer to the  
JUN.01.2008 09:51AM  
AUG.01.2008 01:42PM  
JUN.01.2008 11:45AM  
AUG.01.2008 03:15PM  
JUN.01.2008 05:09PM  
AUG.01.2008 05:32PM  
instruction manual of the  
Everio camera and  
finalize the disc.  
DIGEST PLAYBACK  
C Use the selection keys on the remote control to select the video to  
play back and press the ENTER button.  
Playback begins!  
• When the power lamp blinks slowly in red due to a drop in the burner’s interior  
temperature, some functions will not work and there will be no image displayed on  
the TV screen. Wait until the power lamp stops blinking in red before operating this  
burner.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
zNames and Functions of Each Part ..................................................................... 10  
Front and Top Panel................................................................................................ 10  
zConnecting to the TV ............................................................................................ 12  
Connecting to a TV with HDMI Input Terminal ........................................................ 12  
CyberLink Power2Go 5.5 Lite Contact Information ................................................. 20  
zFolder Configuration............................................................................................. 21  
When Creating and Storing Desired Folders and Files on a PC ............................. 22  
zPlaying Images Stored on the DVD...................................................................... 23  
Viewing Images Copied from the High Definition Everio......................................... 23  
Viewing DVD-Video Copied from Everio ................................................................. 27  
zChanging the Playback Settings.......................................................................... 29  
zOperate in Conjunction with TV via HDMI........................................................... 31  
zViewing High Quality Images ............................................................................... 33  
zSettings Menu........................................................................................................ 34  
Menu Operation Procedures ................................................................................... 34  
Settings Menu Items and Descriptions.................................................................... 35  
zScreen Displays..................................................................................................... 39  
zTroubleshooting .................................................................................................... 41  
zError Messages...................................................................................................... 45  
zOther Information .................................................................................................. 46  
zSpecifications ........................................................................................................ 48  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Accessories  
If there are any items missing, please consult your authorized dealer.  
EN  
ES  
AC adapter  
(AP-V50U)  
Power cord  
USB cable  
Mini A – Mini B type  
Stand  
Audio/Video cable  
Remote control  
(RM-V55U)  
Instruction manual  
(this manual), other  
printed material  
DVD-R (blank disc) x 1  
CD-ROM (data writing  
software) x 1  
Do not use the provided AC adapter and power cord for other devices. In  
addition, do not use AC adapter and power cord other than those provided  
with this burner. Doing so may result in electric shock or fire.  
Placing the Burner  
o Horizontal orientation  
Take note of the top and bottom of the burner and place it in the horizontal  
orientation.  
o Vertical orientation  
Align the groove on the bottom of  
this burner with the bulge on the  
stand and fix the burner securely on  
the stand.  
Groove  
High side  
Low side  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Names and Functions of Each Part  
Front and Top Panel  
Power (On/Off)  
Stop  
Power lamp  
Power on: orange  
USB connected: green  
Pause  
Reverse skip  
Forward skip  
Remote  
control sensor  
Tray  
Access lamp  
Ventilation holes  
Do not block these  
ventilation holes.  
To eject tray (P. 5)  
Rear Panel  
Connect to the Everio camera (P. 14) Connect to the TV’s component  
Connect to the PC (P. 16)  
video input connectors (P. 13)  
Connect to the TV’s video  
input connector (P. 13)  
Connect to the TV’s  
Connect to the  
AC adapter  
HDMI input terminal  
(P. 12)  
Connect to the TV’s audio input  
connectors (P. 13)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Remote Control  
To display the tool menu (P. 25)  
To display the playback menu  
(P. 29)  
EN  
ES  
Power (On/Off)  
To change the output  
resolution of the image (P. 33)  
To perform basic setup  
(P. 34)  
To display information on the  
screen (P. 39)  
To display the playback  
navigator (P. 27)  
To display the playback  
navigator (P. 23)  
To select/confirm  
To return to the previous  
screen  
Basicplayback  
operations  
(P. 25, 28)  
• If the burner responds poorly to the remote control, the battery of the  
remote control is weak. Replace it with a new battery. Insert correctly  
according to the e and d directions indicated.  
Note  
• If problem occurs while using the remote control, remove the battery  
and insert it again before operating the remote control.  
o When using the remote  
control for the first time  
o When replacing the battery  
Lithium battery  
Pull out the insulation sheet  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to the TV  
Connecting to a TV with HDMI Input Terminal  
TV  
This burner  
HDMI input  
HDMI cable (not provided)  
• Images can only be displayed on a High-bandwidth Digital Content  
Protection (HDCP) monitor.  
Note  
• We recommend using the Category 2 HDMI cable (High Speed cable)  
for viewing in higher picture quality.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting to a TV with Component Video Input Connectors  
EN  
ES  
TV  
Component  
video cable  
(not provided)  
This burner  
Component  
video input  
Y
CB/PB  
CR/PR  
Audio in (L)  
Audio in (R)  
Audio cable (not provided)  
• Connect to a High-bandwidth Digital Content Protection (HDCP)  
monitor when using an HDMI-DVI conversion cable.  
Note  
Connecting to a TV with Audio/Video Input Connectors  
TV  
This burner  
Video input  
Video input  
Audio in (L)  
Audio in (R)  
Audio/Video cable  
(provided)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Copying Everio Video to a DVD  
By connecting this burner to an Everio camera, you can easily copy recorded images to  
a DVD.  
Connecting to an Everio Camera  
• Everio: Off  
• This burner: Off  
Preparations  
AC adapter  
USB connector  
DC connector  
USB connector  
Protrusion  
AC adapter  
USB cable (provided  
with CU-VD50)  
To DC jack  
• When the USB cable is connected, all buttons on the remote control of  
this burner are not functional except the power button.  
Note  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Creating AVCHD Disc/Data Disc/DVD-Video  
o Discs that can be created on this burner  
Copy  
High definition videos in  
AVCHD Disc AVCHD format.  
Playback  
Can be played back on AVCHD-  
compatible devices (such as Blu-ray  
recorder) or this burner. (P. 23)  
EN  
ES  
High definition videos in  
MPEG-2 format.  
Play back on this burner. (P. 23)  
Cannot be played back on other devices.  
Data Disc  
Standard definition videos Can be played back on DVD recorder,  
in MPEG-2 format. DVD player or this burner. (P. 27)  
DVD-Video  
• High definition Everio GZ-HD30/HD40 supports both AVCHD and MPEG-2 format  
recording. Other high definition Everio supports MPEG-2 format recording. (As of  
May 2008.)  
• Mode switch on Everio:  
Preparations  
or  
mode (depending on the item to be copied)  
• This burner: On  
A Turn on Everio  
• The Backup menu will appear on the Everio’s LCD monitor.  
B Insert a new disc  
• Refer to page 5 on how to insert the disc.  
• Refer to page 4 for the recommended discs.  
C Create a AVCHD disc, data disc or DVD-Video  
• Refer to the instruction manual of your Everio camera on how to create a  
AVCHD disc, data disc or DVD-Video.  
• Depending on the model connected, still images cannot be copied. For  
details, refer to the instruction manual of the Everio camera.  
Note  
• Do not turn off this burner while data is being written to the disc. The  
disc cannot be ejected during data writing. Wait until writing finishes.  
• The remote control is not operable when this burner is connected to the  
Everio.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Copying from PC to DVD  
This burner can be used as a DVD burner when connected to a PC. And you can use  
the provided software to copy to a DVD.  
Connecting to a PC  
• Everio: Off  
• This burner: Off  
Preparations  
USB cable (provided  
with Everio)  
PC  
USB connector  
USB connector  
DC connector  
AC adapter  
Copying to a DVD  
A Turn on this burner and the PC  
• Install the CyberLink Power2Go 5.5 Lite software if you have not done so.  
(P. 18)  
B Insert a new disc  
• Refer to page 5 on how to insert the disc.  
• Refer to page 4 for the recommended discs.  
C Use Power2Go to copy to a DVD  
A Use Power2Go to create a folder.  
• Use alphanumeric characters when entering the folder names or file names.  
You can enter up to 40 characters.  
B Under the “Burner” tab in the Power2Go “Configuration/Information” menu,  
check the box next to “Close disc”. Confirm that the file system under the data  
tab is set to “UDF 1.5”. Video playback will not function properly if the disc was  
created with the file system set to “ISO9660/Joliet”.  
C Copy files such as JTS, TPD and JPG into the folder.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
• For details on using Power2Go, refer to the User’s guide, Help and  
Readme files installed with the software. You can access the User’s  
guide, Help and Readme files from the Start menu on the PC.  
• To get customer support and to register the software, you need the  
following product key (CD-Key):  
Note  
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS  
• This burner cannot be used to write files into CD-R or CD-RW discs.  
Refer to page 51 for the recommended discs.  
• This burner does not response to all the functions of Power2Go 5.5 Lite.  
• Power2Go 5.5 Lite does not support conversion of audio files to MP3  
format.  
EN  
ES  
• When the “Enter Activation Key” screen appears while using Power2Go  
5.5 Lite, close the screen without entering the activation key.  
o Removing USB cable from PC  
A Carry out removing of hardware on the PC.  
B Remove the USB cable.  
• To play back disc created on a PC on this burner, follow the following  
Caution  
procedure.  
Insert the disc into this burner. After disc recognition, press the  
NAVIGATION/TOP MENU button to display the playback navigator.  
(P. 23)  
• For data disc created on a PC, the date and time displayed will not be  
accurate.  
Computers That Can Be Used  
CyberLink Power2Go 5.5 Lite can be used on computers satisfying the following  
conditions.  
WindowsXP Home Edition (pre-installed)  
Operating  
system  
WindowsXP Professional (pre-installed)  
Windows VistaHome Basic (32-bit edition, pre-installed)  
Windows VistaHome Premium (32-bit edition, pre-installed)  
Connector  
CPU  
USB 2.0/1.1 connector (*)  
IntelPentiumIII, at least 800 MHz  
(IntelPentium4, at least 2 GHz recommended)  
RAM  
At least 128 MB (at least 256 MB recommended)  
Free hard disk  
space  
At least 50 MB for installation  
At least 5 GB recommended for creating DVDs  
Display  
Must be capable of displaying 800 x 600 dots  
* If you use USB 1.1 cable, it will take approximately 3 hours to write one DVD.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing CyberLink Power2Go 5.5 Lite  
• Do not play the provided CD-ROM in an audio player. It is not an audio  
CD. Playing this CD-ROM in an audio player will result in a loud high  
noise. It may also damage the circuit and speaker.  
Caution  
A Insert the provided CD-ROM in the PC  
Windows Vista:  
A Click “Run INSTALL.EXE” on the “AutoPlay” screen.  
B Click “Continue” on the “User Account Control” screen.  
C The “Choose Setup Language” screen appears.  
Windows XP:  
• After a while, the “Choose Setup Language” screen appears.  
B Confirm the language and then click  
“OK”  
• The following screen appears.  
C Click “Next”  
• The “License Agreement” screen appears.  
D Confirm the contents and then click  
“Yes”  
• The “Customer Information” screen appears.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
E Enter the “User Name” and “Company  
Name” and then click “Next”  
EN  
ES  
F Follow the on-screen intructions  
• Installation starts.  
After a while, the “InstallShield Wizard Complete” screen appears.  
G Click “Finish”  
• The computer will restart and installation is  
completed.  
• If the screen on the right does not appear,  
proceed to step H.  
H Click “Finish”  
• The “CyberLink Power2Go 5.5” Readme  
screen appears.  
I Read the contents of the Readme  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CyberLink Power2Go 5.5 Lite Contact Information  
For information on CyberLink Power2Go 5.5 Lite or other products, use the following  
contact information.  
Telephone/fax support  
Office hours  
Location  
Language  
Phone #  
Fax #  
(Mon. to Fri.)  
English / French /  
Spanish  
Germany  
9:00 am to 5:00 pm +49-700-462-92375 +49-241-70525-25  
Paid voice support  
Location  
Language  
Office hours (Mon. to Fri.)  
1:00 pm to 10:00 pm CST  
URL  
http://www.cyberlink.com/english/  
cs/support/  
U.S.A.  
English  
Support web/e-mail  
Language  
URL/e-mail address  
English  
http://www.cyberlink.com/english/cs/support/new_site/support_index.html  
French /  
Spanish  
goCyberlink@aixtema.de  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Folder Configuration  
This shows the folder configuration when files are copied from a high definition Everio  
camera or a PC to a DVD.  
When Copying from High Definition Everio to Data Disc  
EN  
ES  
(Back-up folders)  
Video files  
*1  
[EVERIO_V]  
EVERIO VIDEO  
[BACKUP]  
NORMAL BACK-UP  
(Everio: CREATE FROM ALL)  
[08060101]  
[08060502]  
[MOV001.TOD]  
[MOV002.TOD]  
\
ROOT  
[DATE]  
DATE BACK-UP  
[08060101]  
(Everio: CREATE BY DATE)  
[EVENT]  
EVENT BACK-UP  
[08060101]  
(Everio: CREATE BY EVENT)  
[FILES]  
[08060101]  
FILE BACK-UP  
(Everio: SELECT FROM SCENES)  
[PLAYLIST]  
[08060101]  
PLAYLIST BACK-UP  
(Everio: CREATE BY PLAYLIST)  
(Back-up folders)  
Still image files  
*1  
[BACKUP]  
NORMAL BACK-UP  
[08060101]  
[PIC_0001.JPG]  
[PIC_0002.JPG]  
[EVERIO_S]  
EVERIO IMAGE  
[08060101]  
[08060101]  
[DATE]  
DATE BACK-UP  
[FILES]  
FILE BACK-UP  
*1  
Video and still image files recorded on a high definition Everio camera that are  
copied to this burner will be stored in the “EVERIO_V” and “EVERIO_S” folders.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
When Copying from High Definition Everio to AVCHD Disc  
Video files  
[STREAM]  
[BDMV]  
00000.m2ts  
00001.m2ts  
\
ROOT  
[BACKUP]  
[CLIPINF]  
[PLAYLIST]  
index.bdmv  
MovieObject.bdmv  
[EVERIO_I]  
When Creating and Storing Desired Folders and Files on a PC  
\
ROOT  
Video/still image files  
*2, 3  
*4  
[USER2.TPD]  
[USER1.JTS]  
[USER_DAT]  
[USER_DAT2]  
[USER_DAT3]  
*2 Create folders with Power2Go and copy the desired video and/or still image files  
into the folders. You can use any folder names and file names according to your  
preference. (Indicated as “USER_DAT” in the illustration.)  
*3 Use Power2Go to copy the “USER_DAT” folders to the DVD. (P. 16)  
*4 Files with the extension “.TPD” or “.JTSare high definition Everio video files edited  
on the PC.  
• Refer also to “Data format (extension)” (P. 49).  
• You can create folders and files with any names according to your  
Caution  
preference; however do not use “EVERIO_V” or “EVERIO_Sas the  
folder name.  
• Use alphanumeric characters when entering the folder names or file  
names. You can enter up to 40 characters.  
• You can create up to 6 levels of folders. Playback is not possible if more  
than 6 levels are created.  
• The total path length of the file is up to 240 characters.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Playing Images Stored on the DVD  
You can play back video and still images of Everio stored on a DVD.  
Viewing Images Copied from the High Definition Everio  
EN  
ES  
o To start viewing immediately after storing images on a DVD  
A Remove the USB cable. (P. 14)  
B Connect this burner to the TV.  
• For details on connection, refer to “Connecting to the TV” (P. 12, 13).  
• Check that the power lamp of this burner lights up in orange.  
• After pressing the power button, it will take about 25 seconds to display  
the intermediate screen. (P. 34)  
A Insert the disc containing the copied images and the playback  
navigator will appear  
1/2  
NAVIGATION  
NAVIGATION  
DVD-R  
PAGE 001/002  
DVD-R  
PAGE 001/002  
VIDEO  
IMAGE  
VIDEO  
IMAGE  
FOLDER  
08060101  
FOLDER  
08060101  
001  
002  
003  
004  
JUN.01.2008 09:51AM  
AUG.01.2008 01:42PM  
JUN.01.2008 11:45AM  
AUG.01.2008 03:15PM  
JUN.01.2008 05:09PM  
JUN.01.2008 10:20AM JUN.01.2008 10:35AM JUN.01.2008 11:03AM JUN.01.2008 11:17AM  
005 006 007 008  
AUG.01.2008 05:32PM  
JUN.01.2008 11:21AM JUN.01.2008 01:34PM JUN.01.2008 03:41PM JUN.01.2008 03:56PM  
DIGEST PLAYBACK  
SELECT  
ENTER  
RETURN  
SELECT  
ENTER  
RETURN  
PREVIOUS  
NEXT  
EXIT  
TOOL MENU  
TOOL  
PREVIOUS  
NEXT  
EXIT  
TOOL MENU  
TOOL  
TOP MENU  
TOP MENU  
Data disc (still images)  
AVCHD disc  
Data disc (video images)  
• It will take about 40 seconds to display the playback navigator.  
• To alternate between video and still images on a disc that contains video and still  
images, switch using the TOOL MENU. (P. 25)  
• For data disc (video), the file being selected is played back on its thumbnail.  
(Motion thumbnail) It will take several seconds to display all the eight thumbnails.  
And a little bit more time to show the motion thumbnail.  
• The menu displayed may differ from the menu shown above when an AVCHD  
disc created on other devices is inserted.  
B Select and confirm on the file using the remote control  
A Select  
• Playback of the selected file starts.  
• You can also press the PLAY button to play  
back.  
• You can browse the pages using the  
PREVIOUS / NEXT (  
/
) buttons.  
B Confirm  
• To stop an AVCHD disc during playback, press the STOP button. When  
playback stops, the intermediate screen will appear. (P. 34)  
To display the playback navigator, press the NAVIGATION/TOP MENU  
button.  
Note  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
o Digest Playback (for AVCHD disc only)  
• Use the selection keys to select “DIGEST PLAYBACK” and press the ENTER  
button. The videos will be played back for several seconds consecutively.  
• Press the NAVIGATION/TOP MENU button during playback to display the sub  
menu.  
TO NORMAL PLAYBACK : Plays back the video normally.  
TO INDEX MENU  
: Returns to the playback navigator screen.  
o To play back images in a different folder [for data disc (video/still  
images) only]  
A Display the folder list  
Folder Name  
A Select folder name  
NAVIGATION  
DVD-R  
PAGE 001/002  
VIDEO  
IMAGE  
FOLDER  
08060101  
001  
002  
003  
004  
JUN.01.2008 10:20AM JUN.01.2008 10:35AM JUN.01.2008 11:03AM JUN.01.2008 11:17AM  
005 006 007 008  
B Confirm  
JUN.01.2008 11:21AM JUN.01.2008 01:34PM JUN.01.2008 03:41PM JUN.01.2008 03:56PM  
SELECT  
ENTER  
RETURN  
PREVIOUS  
NEXT  
EXIT  
TOOL MENU  
TOOL  
TOP MENU  
B Select the folder to play back  
• The playback navigator appears when the ENTER button is pressed. Select and  
confirm on the file to be played back.  
NAVIGATION  
DVD-R  
01/002  
A Select  
FOLDER  
VIDEO  
ROOT  
EVERIO VIDEO  
NORMAL BACK-UP  
001  
08060101  
08060102  
08060501  
08060701  
*5.ꢆꢄꢁꢆꢇꢁꢁꢀꢁꢋ!-  
08061301  
08061302  
005  
DATE BACK-UP  
08060101  
08060501  
08060701  
*5.ꢆꢄꢁꢆꢇꢄꢉꢀꢊꢍ0-  
08061301  
B Confirm  
SELECT  
ENTER  
PREVIOUS  
NEXT  
EXIT  
TOOL MENU  
TOOL  
TOP MENU  
RETURN  
• You can also select the folder from the “TOOL MENU” (P. 25).  
• Files are automatically sorted into the folders created depending on the item selected  
in the Backup menu of the high definition Everio.  
• To play back images copied from the PC, select the edited video files. (P. 22)  
Select a folder name when you have created a folder on the PC according to your  
preference. (P. 22)  
• If images do not appear, check the resolution setting. (P. 33)  
Caution  
• For short video clips (less than 3 seconds), the image will freeze for a few  
seconds before playing the next file. (P. 44)  
• For data disc (video), the image will freeze for a few seconds before  
continuing to the next folder.  
• Depending on the still image standards, some images are displayed  
using a “?” thumbnail, and playback may fail in this case.  
Note  
• Progressive JPEG files and special files created on the PC cannot be  
played back. Videos that are not playable are also displayed as “?”.  
• It may take some time to display the images if the size is too large or  
when there are too many files.  
• For data disc (still images) created on a PC, files with less than 640 x  
480 resolution will not be displayed in full screen.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
o Displaying the TOOL MENU [for data disc (video/still images) only]  
You can switch between video/still images or display file details from the TOOL  
MENU.  
TOOL MENU  
Operate when playback navigator is displayed  
A Select  
NAVIGATION  
DVD-R  
TOOL MENU  
VIDEO  
IMAGE  
BACK  
FOLDER  
08060101  
FOLDER SELECT  
EN  
ES  
SWITCH TO IMAGE MODE  
00SHOW DETAIL  
001  
002  
003  
JUN.01.2008 10:20AM JUN.01.2008 10:35AM JUN.01.2008 11:03AM *5  
0
.
0
0
5
0
0
6
0
0
7
0
0
JUN.01.2008 11:21AM JUN.01.2008 01:34PM JUN.01.2008 03:41PM *5  
0
.
B Confirm  
SELECT  
ENTER  
RETURN  
PREVIOUS  
NEXT  
EXIT  
TOOL MENU  
TOOL  
TOP MENU  
Select an item with the selection keys and press the ENTER button.  
FOLDER SELECT: Displays the folder list.  
SWITCH TO IMAGE MODE : Switches from video to still image.  
(SWITCH TO VIDEO MODE: Switches from still image to video.)  
SHOW DETAIL: Displays the file name, folder name, recorded date, and playback  
duration (for video) or image size (for still image). The playback  
duration display for video will not be available if the file has not been  
played back before.  
• When the disc contains both videos and still images, the videos will be  
Note  
displayed first. To view still images, select “SWITCH TO IMAGE MODE”  
from the TOOL MENU.  
o Buttons that can be used during playback (AVCHD / data disc)  
Description  
Video Image Playback  
Remote Control Button  
Still Image Playback  
Pressing this button when in  
the paused or variable speed  
playback mode resumes  
normal playback.  
PLAY  
Starts the slide show.  
PAUSE  
STOP  
Pauses playback.  
Stops playback.  
Pauses the slide show.  
Stops the slide show.  
Fast-forwards playback.  
Changes in the order of Search  
+1 to Search +3 with each  
press.  
Press the button when in the  
paused mode to enable forward  
playback frame by frame.  
Press and hold the button to  
slow down the playback speed.  
Pressing the button each time  
changes the playback speed  
between 1/16x, 1/4x, and 1/2x.  
FWD  
b
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Description  
Video Image Playback  
Remote Control Button  
Still Image Playback  
Rewinds playback. Changes in  
the order of Search b1 to  
Search b3 with each press.  
Press the button when in the  
paused mode to enable reverse  
playback frame by frame. (Not  
available for AVCHD disc.)  
Reverse playback at slow  
speed is not possible.  
REV  
b
Displays the next still  
image.  
NEXT  
Displays the next video image.  
Displays the beginning of the  
video image.  
Displays the previous still  
image.  
PREVIOUS  
Advances the playback position  
by about 30 seconds. Pressing Rotates the still image by  
the button continuously  
90 degrees in the  
Skip  
advances the playback position clockwise direction.  
by the number of times it is  
pressed.  
(When in paused mode.)  
Moves the playback position  
backward by about 7 seconds.  
Pressing the button  
continuously moves the  
playback position backward by  
the number of times it is  
pressed.  
Rotates the still image by  
90 degrees in the anti-  
clockwise direction.  
Replay  
(When in paused mode.)  
Enlarges the still image.  
(2-step)  
You can select the  
position to enlarge using  
the Up/Down/Left/Right  
buttons. Press the  
ENTER  
b
RETURN button to restore  
the original size.  
(When in paused mode.)  
NAVIGATION Displays the playback  
/TOP MENU navigator.  
Displays the playback  
navigator.  
Displays the playback menu.  
(P. 29)  
Displays the playback  
menu. (P. 29)  
TOOL  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing DVD-Video Copied from Everio  
o To start viewing immediately after storing images on a DVD  
A Remove the USB cable. (P. 14)  
B Connect this burner to the TV.  
EN  
ES  
• For details on connection, refer to “Connecting to the TV” (P. 12, 13).  
• Check that the power lamp of this burner lights up in orange.  
• After pressing the power button, it will take about 25 seconds to display  
the intermediate screen. (P. 34)  
o To play back the copied files  
A Insert the disc containing the copied images  
• Playback starts automatically.  
o To select and play back a desired file  
A Insert the disc containing the copied images  
• Playback starts automatically.  
B During playback, press the NAVIGATION/TOP MENU button to  
display the playback navigator  
• Depending on the disc, you can display the playback navigator by pressing the  
MENU button.  
C Select and confirm on the file to play back  
A Select  
B Confirm  
• To stop playback, press the STOP button. When playback stops, the  
intermediate screen will appear. (P. 34)  
Note  
To display the playback navigator, press the NAVIGATION/TOP MENU  
button.  
• If images do not appear, check the resolution setting. (P. 33)  
Caution  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
o Buttons that can be used during playback (DVD-Video)  
Remote Control Button  
Description  
Pressing this button when in the paused or variable speed  
playback mode resumes normal playback.  
PLAY  
PAUSE  
STOP  
Pauses playback.  
Stops playback.  
Fast-forwards playback. Changes in the order of Search +1  
to Search +3 with each press.  
Press the button when in the paused mode to enable  
forward playback frame by frame.  
FWD  
Press and hold the button to slow down the playback  
speed. Pressing the button each time changes the  
playback speed between 1/16x, 1/4x, and 1/2x.  
Rewinds playback. Changes in the order of Search b1 to  
Search b3 with each press.  
Press the button when in the paused mode to enable  
reverse playback frame by frame.  
REV  
Press and hold the button to slow down the reverse  
playback speed. Pressing the button each time changes  
the reverse playback speed between b1/16x and b1/4x.  
NEXT  
Displays the next video.  
PREVIOUS Displays the previous video.  
Advances the playback position by about 30 seconds.  
Pressing the button continuously advances the playback  
position by the number of times it is pressed.  
Skip  
Moves the playback position backward by about 7 seconds.  
Pressing the button continuously moves the playback  
position backward by the number of times it is pressed.  
Replay  
TOOL  
Displays the playback menu. (P. 29)  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the Playback Settings  
You can alter the method for playing back video/still images as well as the image  
settings.  
Operate during playback  
PLAYBACK SETTING  
REPEAT  
OFF  
EN  
ES  
CHANGE TITLE  
CHANGE CHAPTER  
indicates the default settings during purchase of this product.  
DISC SETTING  
If the disc contains more than one audio language, subtitle  
language or has multi-angle scenes, you can select with this  
setting.  
AUDIO LANGUAGE  
SUBTITLE  
CHANGE ANGLE  
Set the audio language to be played back.  
Set the subtitle language to be displayed.  
Switch the angle (camera) to be played back.  
PLAYBACK SETTING  
REPEAT  
For configuring settings on video playback and repeat playback of slide shows.  
OFF  
Do not repeat.  
TITLE  
Repeats playback of the title. (For video images only.)  
Repeats playback between the chapters. (For AVCHD  
discs and DVD-Videos only.)  
Repeats playback of files within a folder. (For files  
stored on the PC only.)  
CHAPTER  
FOLDER  
Repeats playback of all files*. (For data disc stored on  
high definition Everio only.)  
* The files in the current folder are played back  
repeatedly when you play back from the playback  
navigator.  
ALL  
Repeats playback between two predetermined points A  
and B. (For DVD-Videos only.)  
A-B  
CHANGE TITLE (For AVCHD discs and DVD-Videos only)  
Jumps to the specified title.  
CHANGE CHAPTER (For AVCHD discs and DVD-Videos only)  
Jumps to the specified chapter.  
SLIDESHOW INTERVAL (For still images only)  
5 SEC / 10 SEC /15 SEC For specifying the time for displaying images.  
SLIDESHOW EFFECTS (For still images only)  
For specifying the fade effect when switching to another image.  
OFF  
ON  
Disable fade effect.  
Enable fade-in or fade-out from black color.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
VIDEO SETTING  
You can only configure settings for video images.  
PICTURE QUALITY  
For specifying the video image quality.  
NORMAL  
CINEMA  
FINE  
Set to this value under normal circumstances.  
Plays back in cinema-like picture quality.  
Plays back in clear sharply defined picture quality.  
Plays back in soft textured picture quality.  
SOFT  
Plays back images in the picture quality specified in  
“DETAIL SETTING”.  
USER SETTING  
DIGITAL NOISE REDUCTION  
For specifying whether to enable noise removal from the image.  
OFF  
ON  
Disable noise removal.  
Enable noise removal.  
DETAIL SETTING  
For specifying the advanced settings when “PICTURE QUALITY” is set to “USER  
SETTING”.  
CONTRAST  
BRIGHTNESS  
SHARPNESS  
COLOR  
For specifying the image contrast level.  
For specifying the image brightness level.  
For specifying the image contour.  
For specifying the color intensity of the image.  
For specifying the image gray level.  
GAMMA  
3DNR  
For specifying the image noise reduction.  
PROGRESSIVE OUTPUT  
For playing back the source material after converting to an appropriate progressive  
video.  
Automatically detects the film material and video material  
AUTO1  
and converts to the appropriate progressive video.  
In addition to “AUTO1”, automatically detects the 30fps  
progressive video and converts to the appropriate  
progressive video.  
Converts the video material to the appropriate progressive  
video.  
AUTO2  
VIDEO  
• Changing the setting may have no effect on some images.  
Note  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operate in Conjunction with TV via  
HDMI  
Connecting this burner to an HDMI-CEC-enabled TV using the HDMI cable allows you  
to utilize the following convenient functions.  
EN  
ES  
• Connect an HDMI cable between this  
Preparations  
burner and the TV. (P. 12)  
CONNECTION SETTING  
• Turn on the TV and set the HDMI-CEC  
MONITOR TYPE  
16:9  
480i  
COMPONENT OUTPUT  
HDMI VIDEO MODE  
related setting in its menu to “on”. (For  
details, refer to the instruction manual of  
the TV.)  
• Turn on this burner and set “CONTROL  
WITH HDMI” under “CONNECTION  
SETTING” in the settings menu to “ON”.  
(P. 34, 37)  
SELECT  
ENTER  
RETURN  
EXIT  
HDMI cable (not provided)  
Operation method 1  
• Insert a disc.  
• The TV automatically  
switches to the HDMI input.  
(Turn on the TV  
(Press the PLAY or  
NAVIGATION/TOP  
MENU button if the  
playback navigator does  
not appear.)  
beforehand.)  
Operation method 2  
• This burner turns off  
automatically.  
• Turn off the TV.  
Some TV will turn on automatically and switch to the HDMI input just by  
turning on this burner.  
Note  
• Depending on the TV connected, the onscreen display language of this  
burner will automatically switched to the language that was being  
selected for the TV when the burner is turned on.  
(This is applicable only if this burner supports the language selected for  
the TV.)  
To use this burner using a language that differs from the onscreen  
display language of the TV, set “CONTROL WITH HDMI” to “OFF”.  
• Malfunction may occur when devices such as amplifier and selector are  
connected. Set “CONTROL WITH HDMI” to “OFF”.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
• HDMI-CEC (Consumer Electronics Control) is an industry standard that  
enables interoperability between HDMI-CEC compliant devices that are  
connected via HDMI cables.  
Note  
• Not all HDMI-compatible devices comply with the HDMI-CEC standard.  
The HDMI control function of this burner will not work when connected  
to these devices.  
• This burner is not guaranteed to operate with all HDMI-CEC-enabled  
devices.  
• Depending on the specifications of each HDMI-CEC-enabled device,  
some functions may not work with this burner. (For details, refer to the  
instruction manual of your TV.)  
• Unintended operations may occur with some connected devices. In  
these cases, set “CONTROL WITH HDMI” to “OFF”.  
• HDMI control does not function when the USB cable is connected.  
Remove the USB cable if you want to use the HDMI control function.  
• HDMI control does not function immediately after inserting the power  
cord to the AC outlet. Press the power button on this burner to turn it on.  
• If the HDMI cable connection is changed, perform the following  
operations to allow this burner and the connected devices to recognize  
each other.  
Caution  
A With the TV turned on, turn off and on this burner again.  
B Set the “CONTROL WITH HDMI” under “CONNECTION SETTING” in  
the settings menu to “OFF”, then set to “ON” again.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing High Quality Images  
You can change the video output resolution when this burner is connected to a high  
definition TV using a HDMI or component video cable.  
(Intermediate screen)  
Operate when in the intermediate screen*  
EN  
ES  
* To display the intermediate screen, refer to page 34.  
Current resolution: AUTO  
• Press the button each time to change the output resolution.  
o Connection using HDMI cable (“HDMI VIDEO MODE” : “ON”)  
(Resolutions not supported by the TV are not displayed.)  
AUTO  
480p  
720p  
1080i  
1080p  
o Connection using component video cable  
(“HDMI VIDEO MODE” : “OFF”, HDMI cable not connected)  
480i  
480p  
720p  
o Connection using video cable  
Setting is not necessary. “480i” is output regardless of the setting.  
• If this burner is connected to a TV that does not support the preset output  
Caution  
resolution using a HDMI cable, the setting switches automatically to  
“AUTO”.  
• When this burner is connected using a component video cable with the  
output resolution set to “1080i” or “720p”, the output resolution will be set  
to “480i” or “480p” if a DVD-Video disc is inserted.  
• When the HDMI cable is connected, the resolution of the component  
connectors is fixed at “480i”. (“HDMI VIDEO MODE” : “ON”)  
Note  
• When the resolution is set to “480p” for the HDMI cable connection, the  
“4:3 PAN&SCAN” or “4:3 LETTERBOX” display format under  
“MONITOR TYPE” in the settings menu will be selected if the image  
size is 4:3. (P. 35)  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings Menu  
Change the settings of this burner according to the environment of use.  
Menu Operation Procedures  
• The SET UP button can only function when the intermediate screen  
Caution  
(screen without image display) is displayed. If the playback navigator is  
displayed, press STOP (for AVCHD disc and DVD-Video) or  
NAVIGATION/TOP MENU (for data disc) to clear the screen.  
Example: When changing “MONITOR TYPE” under “CONNECTION SETTING” from  
“16:9” to “4:3 LETTERBOX”  
A Display the settings menu  
B Select “CONNECTION SETTING”  
A Select  
CONNECTION SETTING  
MONITOR TYPE  
16:9  
480i  
COMPONENT OUTPUT  
HDMI VIDEO MODE  
B Confirm  
SELECT  
ENTER  
RETURN  
EXIT  
C Select “MONITOR TYPE”  
A Select  
CONNECTION SETTING  
MONITOR TYPE  
16:9  
480i  
COMPONENT OUTPUT  
HDMI VIDEO MODE  
B Confirm  
SELECT  
ENTER  
RETURN  
EXIT  
D Select “4:3 LETTERBOX”  
A Select  
CONNECTION SETTING  
16:9  
MONITOR TYPE  
16:9  
480i  
16:9FULL  
COMPONENT OUTPUT  
HDMI VIDEO MODE  
4:3 PAN&SCAN  
4:3 LETTERBOX  
B Confirm  
SELECT  
ENTER  
RETURN  
EXIT  
E Close the settings menu  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Settings Menu Items and Descriptions  
indicates the default settings during purchase of this product.  
¹ Menu items for which setting cannot be changed will appear grayed out on the  
screen.  
EN  
ES  
DISC SETTING  
If the disc contains more than one audio language, subtitle  
language or has multi-angle scenes, you can select with this  
setting.  
AUDIO LANGUAGE Set the audio language to be played back.  
SUBTITLE  
CHANGE ANGLE  
Set the subtitle language to be displayed.  
Switch the angle (camera) to be played back.  
VIDEO SETTING  
BLACK LEVEL CONTROL  
For specifying the black level of the video image.  
DARKER  
BRIGHTER  
Set to this value under normal circumstances.  
Set to this value to brighten the dark areas of the video image.  
AUDIO SETTING  
DYNAMIC RANGE COMPRESSION  
For specifying the dynamic range (ratio between strong and weak signals) of audio  
sound. Minute sounds may be heard when the dynamic range is compressed.  
ON  
OFF  
Outputs audio sound after compressing the dynamic range.  
Outputs the recorded audio sound without compressing.  
CONNECTION SETTING  
MONITOR TYPE  
Specify the screen size according to the TV connected. (If the screen size of the TV  
is fixed, images displayed on the TV will not change even if you change the settings  
of the burner.)  
When connecting to a wide-screen TV (16:9)  
(A black band will appear on both left and right sides for 4:3  
images.)  
16:9  
When connecting to a wide-screen TV (16:9)  
(4:3 images will be stretched sideways.)  
16:9FULL  
When connecting to a 4:3 TV  
(The left and right sides of 16:9 images will be missing.)  
4:3 PAN&SCAN  
When connecting to a 4:3 TV  
(A black band will appear at the top and bottom for 16:9  
images.)  
4:3 LETTERBOX  
• Changing the setting may have no effect on some images.  
Note  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CONNECTION SETTING  
COMPONENT OUTPUT  
For specifying the output resolution setting of the component connectors. You can  
also specify the setting using the remote control. (P. 33)  
480i  
480p  
720p  
During output in D1 (480i)  
During output in D2 (480p)  
During output in D3 (1080i)  
During output in D4 (720p)  
1080i  
HDMI SETTING  
HDMI VIDEO MODE  
Specify this setting when you are using the burner with both the HDMI terminal  
and component connectors connected.  
ON  
OFF  
Outputs with priority given to the HDMI terminal.  
Outputs with priority given to the component connectors.  
HDMI OUTPUT  
For specifying the output resolution setting of the HDMI terminal. You can also  
specify the setting using the remote control. (P. 33)  
AUTO  
480p  
Set to this value under normal circumstances.  
During output in D2 (480p)  
720p  
During output in D3 (1080i)  
1080i  
During output in D4 (720p)  
1080p  
During output in D5 (1080p) (P. 12)  
24p OUTPUT  
JVC camcorders do not support 1080/24p recording. (As of May 2008.)  
Specify this setting when viewing video images recorded by other devices in  
1080/24p on a TV that supports 1080/24p via HDMI connection.  
Select this value to output the images in 1080/24p to a TV that  
supports 1080/24p. Set to “OFF” if the images cannot be  
played back properly.  
AUTO  
OFF  
Set to this value under normal circumstances.  
x.v.Color  
Specify this setting when viewing video images recorded in x.v.Color on a TV that  
supports x.v.Color. This enhances viewing through reproducing colors closely to  
their natural colors.  
AUTO  
Set to this value under normal circumstances.  
Set to this value when the video images are distorted or when  
the colors are not correctly reproduced.  
OFF  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Deep Color  
This function works during playback. Specify this setting when viewing images on  
a TV that supports Deep Color. This allows viewing of high definition images of  
30-bit and 36-bit color depths that are higher than the full 24-bit color.  
Select this value to view high definition images on a TV that  
supports Deep Color. Set to “OFF” if the images cannot be  
played back properly.  
AUTO  
OFF  
EN  
ES  
Set to this value under normal circumstances.  
HDMI ENHANCE SETTING  
Specify this setting when connected to a TV that comes with the DVI input  
terminal using an HDMI-DVI conversion cable.  
STANDARD  
Set to this value under normal circumstances.  
Set to this value when the black and white colors of the video  
image are not clear.  
ENHANCED  
CONTROL WITH HDMI  
For specifying whether to use the HDMI-CEC function which allows the TV to  
operate in conjunction with this burner. (P. 31)  
OFF  
ON  
Do not operate in conjunction with TV.  
Operate in conjunction with TV.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OTHER SETTING  
RESUME *  
For specifying whether to memorize the stop position.  
ON  
OFF  
Memorize the stop position.  
Do not memorize the stop position.  
ON SCREEN GUIDE  
For specifying whether to display the playback status information.  
AUTO  
OFF  
Display for 5 seconds.  
Do not display.  
ON SCREEN LANGUAGE  
For specifying the language to be displayed for the settings menu screen and others.  
“ENGLISH” is set as the default language.  
(
/ ENGLISH / FRANÇIAS / DEUTSCH / ITALIANO / NEDERLANDS /  
PORTUGUÊS / ESPAÑOL /  
/
/
/ РУССКИЙ)  
SCREEN SAVER  
For specifying whether to activate the screensaver.  
Activates the screensaver when this burner is not operated for  
an interval of 5 minutes.  
ON  
OFF  
Do not activate the screensaver.  
INITIALIZE SETTING  
Restores the settings to the default state at the time of purchase.  
DATE DISPLAY STYLE (For data disc only)  
Sorts the dates in order. (year.month.day / month.day.year / day.month.year)  
TIME DISPLAY CHOICE (For data disc only)  
For specifying the time display. (12h / 24h)  
* For resume function, the stop position will be reset if the burner is connected to an  
Everio or a PC via the USB cable, or when the burner is turned off and the disc is  
removed.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Displays  
You can display information during playback on the screen.  
EN  
ES  
• Press each time to hide/show information.  
o During playback of AVCHD disc copied from a high definition Everio  
Chapter Number  
Playback Time  
Title Number  
Disc Type  
DVD-R  
Dolby D 2ch  
T2  
C1  
00:00:25  
Audio Format  
Playback Mode  
Playback Position  
o During playback of video data disc copied from a high definition  
Everio  
Playback Time  
File Date/Time  
Disc Type  
DVD-R  
JUN.01.2008 10:20AM 00:00:25  
MPEG 2ch  
Playback Position  
Audio Format  
Playback Mode  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
o During playback of still image data disc copied from a high definition  
Everio  
File Date/Time  
Disc Type  
DVD-R  
JUN.01.2008 10:20AM  
Playback Mode  
o During playback of DVD disc copied from Everio  
Chapter Number  
Playback Time  
Title Number  
Disc Type  
DVD-R  
Dolby D 2ch  
T1  
C1  
00:00:25  
Audio Format  
Playback Mode  
Playback Position  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Trouble  
Action  
Cannot turn the  
power on.  
zMake sure the AC adapter and power cord are  
properly connected. (P. 4)  
EN  
ES  
zPress the power button on this burner for more  
than 5 seconds to reset the burner. (The burner  
will turn off automatically.)  
Cannot function  
properly.  
zThe burner and AC adapter will become hot  
with prolonged use. This is not a malfunction.  
zIf the burner is abnormally hot, remove the AC  
adapter and consult the dealer from which the  
burner is purchased.  
The burner or AC  
adapter is hot.  
zThe burner cannot function properly due to a  
drop in its interior temperature. Wait until the  
power lamp stops blinking.  
zThere is a rise in the burner’s interior  
temperature. Turn off the burner, wait for a  
while then turn on again.  
The power lamp  
blinks slowly in red  
while using the  
burner.  
zMake sure the USB cable is connected  
properly. Insert the connector with the  
protrusion to the burner, and the other end to  
the Everio camera. (P. 14)  
The burner is not  
recognized by the  
Everio camera.  
The burner is not  
recognized by the PC.  
zMake sure the USB cable provided with the  
Everio camera is connected properly. (P. 16)  
zUse discs recommended for the burner. (P. 48)  
zInsert the disc with the label facing up.  
zWipe off any dirt that is found on the tray.  
zUse discs for which the writing surface is not  
damaged.  
Writing fails.  
zDo not use deformed discs.  
zIf disc writing is currently in progress, the disc  
tray cannot be opened. Wait till the writing  
process ends.  
zIf the disc cannot be properly ejected after the  
burner is dropped or due to other malfunctions,  
insert a thin rod into the force eject hole to eject  
the disc. (P. 44)  
Cannot open the disc  
tray.  
Unable to write/read  
data at the maximum  
speed (when  
zUse the recommended discs. (P. 48)  
connected to a PC)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Trouble  
Action  
The remote control is  
not working.  
zThe remote control is not operable when the  
disc tray is opened. Close the disc tray.  
zIf the burner does not work at all, remove the  
power plug and insert again. (It may not  
function properly due to lightning strike or static  
electricity.)  
Unable to operate.  
zConnect this burner to a TV. (P. 12, 13)  
zSwitch to the external output that connects the  
burner to the TV with a video/audio input  
connectors.  
zAfter pressing the power button, it will take  
about 25 seconds to display the intermediate  
screen. (P. 34)  
No images on the TV.  
zIf there are too many recorded files or when a  
disc that is not recommended is used, it will  
take several minutes to display the playback  
navigator.  
zCheck the resolution setting again. (P. 33)  
Images are distorted  
during fast-forward/  
fast-reverse playback.  
z
Images may be distorted for sections where the  
playback speed changes. This is not a  
malfunction.  
zWhen both the HDMI terminal and Audio/Video  
output connectors are connected, set “HDMI  
VIDEO MODE” in the settings menu to “OFF” to  
output the images with priority given to the  
Audio/Video output connectors. (P. 36)  
The images cannot be  
displayed in the  
normal aspect ratio.  
zInsert the disc with the label facing up.  
zWipe off any dirt that is found on the tray.  
zMake sure that the writing surface of the disc is  
not damaged.  
Reading fails.  
zDo not use deformed discs.  
Playback cannot  
function properly.  
zPlayback of commercial DVD-Video is not  
guaranteed.  
zAVCHD disc created on a high definition Everio  
is equipped with the Digest Playback function. If  
the PREVIOUS / NEXT button is pressed  
repeatedly during playback, Digest Playback  
will start when the normal playback ends.  
(P. 24)  
Digest Playback  
starts when the  
PREVIOUS / NEXT  
button is pressed  
repeatedly.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble  
Action  
Unable to read the  
content of the AVCHD  
disc using the PC’s  
explorer function.  
zThe PC’s operation system does not support  
the AVCHD disc. Install the Power2Go software  
provided.  
EN  
ES  
Unable to play back  
images added by a  
PC.  
zWhen playing back a disc (multi-border disc)  
containing images added by a PC, the added  
images cannot be played back.  
The TV switches input  
automatically when  
the burner is played.  
The TV turns off when  
this burner is turned  
off.  
zThe HDMI-CEC function is enabled. To disable,  
set “CONTROL WITH HDMI” in the settings  
menu to “OFF”. (P. 37)  
This burner functions  
when the TV’s remote  
control is being  
operated.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems with seamless playback  
During continuous playback of multiple files, the image will freeze for a few seconds  
while switching the files in the following cases.  
• When the recording dates are different:  
The image will freeze for a few seconds when switching between files with different  
recording dates.  
For files with the same date, playback is seamless.  
• When files are deleted:  
If files are deleted and added after deleting during continuous recording, the image  
will freeze for a few seconds at the part where deleting is done.  
When no files are deleted, playback is seamless.  
• When the picture quality (XP/SP/EP) is changed during recording:  
The image will freeze for a few seconds when switching between files with different  
picture quality.  
For files recorded in the same picture quality, playback is seamless.  
• When the recorded file is less than 3 seconds:  
The image will freeze for a few seconds at the end of a file that is less than  
3 seconds.  
• When more than 99 files with the same date are recorded:  
The image will freeze for a few seconds when switching between files at every 99 file  
recordings.  
For continuous 99 files, playback is seamless.  
Disc cannot be ejected  
When a disc cannot be ejected with the eject button, use the following procedure to  
eject by force.  
A Turn off this burner.  
B Insert a thin rod into the force eject hole located  
next to the eject button and the tray will be  
ejected.  
C Pull out the tray manually and remove the disc.  
Force eject hole  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Error Messages  
Trouble  
Action  
zThe disc may be dirty. Clean the disc and try again.  
zThe disc or data format is not supported. Check the  
disc or data format (extension). (P. 49)  
Unplayable disc  
EN  
ES  
zInsert a disc that can be played on this burner.  
(P. 49)  
zThe “Close disc” check box in Power2Go might have  
been unchecked to allow further recording. Under  
the “Burner” tab in the Power2Go “Configuration/  
Information” menu, check the box to close the disc.  
(P. 16)  
Incompatible disc  
zDisc is not finalized when it is copied from the high  
definition Everio. Make sure to finalize the disc after  
copying. (For details, refer to the instruction manual  
of the Everio camera.)  
Unfinalized disc  
Use finalized disc  
Disc error  
zThe disc may be dirty. Clean the disc and try again.  
zDiscs with a region code of “1” or “ALL” can be  
played back on this burner. Discs with a different  
region code from above cannot be played. (P. 46)  
Region code error  
Cannot execute the  
operation  
zOperate after stopping playback.  
zFile data may be missing.  
zThe disc or data format is not supported. Check the  
disc or data format (extension). (P. 49)  
Cannot play back  
zYou have selected a folder that does not contain any  
videos.  
Select a folder with video files. (P. 25)  
No video files  
stored  
zYou have selected a folder that does not contain any  
still images.  
Select a folder with still image files. (P. 25)  
No image files  
stored  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Other Information  
Cleaning Procedure  
IMPORTANT:  
• Be sure to unplug the burner before beginning cleaning.  
• Do not use liquid or aerosol cleaners.  
• Ensure that no moisture or liquid comes into contact with the drive during cleaning.  
Exterior of the Burner:  
Wipe dirt off with a dry cloth.  
Disc Tray:  
Wipe off dirt with a soft dry cloth.  
Do not touch the lens. To clean the lens, use commercially  
available lens cleaning blower for cameras. Using a lens cleaning  
Lens  
disc will cause malfunction.  
Disc:  
Use a commercially available cleaning cloth to gently wipe from  
the inner edge to the outer edge.  
Do not paste any stickers on the label side of the disc. This will cause the center of  
rotation to deviate and increase the vibration of the rotating disc thereby affecting  
proper playback.  
Storage:  
Make sure that discs are kept in their cases. If discs are piled on top of one another  
without their protective cases, they can be damaged. Do not put discs in a location  
where they may be exposed to direct sunlight, or in a place where the humidity or  
temperature is high. Avoid leaving discs in your car!  
Region Codes  
Region codes are numbers for restricting DVD video playback. The world is separated  
into six regions and each region is identified by a number. If the number for a disc does  
not match the number for the player, the disc cannot be played on the player.  
Disclaimer  
JVC accepts no liability whatsoever for loss of data resulting from inappropriate  
connections or handling.  
Copyrights  
Duplicating copyright protected material, for other than personal use, without the  
permission of the copyright holder is prohibited by copyright law.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Registered Trademarks and Trademarks  
• Microsoft, Windows, and Windows Vista are is either registered trademarks or  
trademarks of Microsoft Corporation in the United States and/or other countries.  
• Macintosh and Mac OS are trademarks of Apple, Inc., registered in the United States  
and other countries.  
• Pentium is a registered trademark of Intel Corporation in the United States.  
• Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D  
symbol are trademarks of Dolby Laboratories.  
EN  
ES  
• HDMI, the HDMI logo and high definition multimedia interface are trademarks or  
registered trademarks of HDMI Licensing LCC.  
• The x.v.Color and x.v.Color logos are trademarks.  
• The AVCHD and AVCHD logos are trademarks of Matsushita Electric Industrial Co.,  
Ltd. and Sony Corporation.  
• Other company and product names mentioned herein are registered trademarks and/  
or trademarks of their respective holders.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Rated current  
2.3 A  
Dimensions (W x H x D) 152 x 42 x 195 mm (6" x 1-7/10" x 7-7/10")  
Approx. 920 g (2 lbs)  
Mass  
(excluding AC adapter and connection cables)  
Operating temperature: 0 ؇ C to 35 ؇ C (41 ؇ F to 95 ؇F)  
Operating environment  
Storage temperature: -20 ؇ C to 60 ؇ C (-4 ؇F to 140 ؇ F)  
Laser power  
(wavelength, output)  
For DVD: 656 to 663 nm, 1.04 mW  
For CD: 777 to 788 nm, 1.33 mW  
AC adapter (AP-V50U)  
Power supply  
Input capacity  
Output  
AC110 V to 240 V, 50 Hz/60 Hz  
0.6 A  
DC 5.3 V, 3.5 A  
Operating temperature 0 ؇ C to 40 ؇ C (32 ؇F to 104 ؇F)  
52 x 31 x 120 mm (2" x 1-1/5" x 4-7/10")  
(excluding power cord)  
Dimensions (W x H x D)  
Mass  
Approx. 136 g (0.3 lbs)  
Remote control (RM-V55U)  
Type  
DC 3 V (CR2025 button battery)  
Approx. 1 year (depending on the frequency of use)  
Approx. 5 m (face up)  
Battery life  
Operating distance  
Operating temperature 0 ؇ C to 40 ؇ C (32 ؇F to 104 ؇F)  
Dimensions (W x H x D) 42 x 12 x 100 mm (1-7/10" x 1/2" x 4")  
Mass  
Approx. 32 g (0.1 lbs) (including lithium battery)  
Recommended discs  
DVD-R  
JVC, TDK, Verbatim, SONY  
JVC *2, Verbatim  
JVC  
DVD-R DL *1  
DVD-RW  
• Use of this burner may not be possible or optimal performance may not be achieved  
depending on the disc used. We suggest using the recommended discs.  
• Use DVDs for videos.  
• This burner supports only 12 cm discs.  
• The appearance and specifications of this product may be modified without prior  
notice.  
*1 DVD-R DL discs can be used when the burner is connected to a high definition  
Everio and PC.  
*2 For DVD-R DL manufactured by JVC, use of discs with the “Also recommended for  
high definition Everio” message stated is recommended.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playback feature  
Discs supported  
DVD-R, DVD-R DL, DVD-RW  
Data format  
(extension)  
zAVCHD or DVD data disc created by connecting to a high  
definition Everio  
EN  
ES  
zDVD video disc created by connecting to Everio  
zDVD data disc for which data is recorded using the high  
definition Everio, processed using an editing software of  
Everio, and written to a specific folder on this burner  
Select the file format for GZ-HD series as the output format  
in the PowerDirector output menu.  
Set the file system under the data tab in the Power2Go 5.5  
Lite configuration menu to “UDF 1.5”.  
• If images created by selecting “SVRT” in the PowerDirector  
output menu cannot be played back correctly, deselect  
SVRT” and execute again.  
zExtensions recognized by this burner are as follows.  
(Extensions that have been changed cannot be played back  
properly.)  
• Data recorded on Everio (via PC): MTS, TOD, MOD, JPG  
• Data edited on PC: JTS, TPD, JPG  
• When playing back a file created on a PC, pressing the  
PLAY button after searching may cause the playback  
position to deviate.  
Video output  
Audio output  
1.0 V 75 K (Pin jack)  
2.0 Vrms (Pin jack)  
Component video  
output  
Y p-p: 1.0 V 75 K (Pin jack)  
CB/CR, PB/PR p-p: 0.7 V 75 K (Pin jack)  
HDMI output  
terminal  
19-pin HDCP, x.v.Color, Deep Color compliant  
Video: 1080p / 1080i / 720p / 480p / 480i  
(We do not provide guarantee for compatibility with DVI-D.)  
Audio: 2CH PCM/bit stream  
• Discs other than those above cannot be played back properly.  
Caution  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
When connected to an Everio camera  
Interface  
USB 2.0  
Interface cable  
USB cable (Mini A type - Mini B type)  
Compatible discs for Everio  
DVD-R, DVD-RW  
writing  
High definition  
Everio  
(8 cm discs cannot  
be used)  
DVD-R, DVD-R DL, DVD-RW  
DVD-Video (video only)  
Recording format  
Everio  
High definition AVCHD disc (video)  
Everio  
Data disc (video, still image)  
Recording time  
Everio  
Approx. 30 minutes (including time for  
finalization)  
When recording videos for about 90 minutes  
in the Fine mode to a 4.7 GB disc. (This may  
vary according to conditions such as the  
number of titles.)  
High definition AVCHD disc:  
Everio  
Approx. 60 minutes (including time for  
finalization)  
• When recording videos for about 60 minutes  
in the XP mode to a 8.5 GB DVD-R DL disc.  
(This may vary according to conditions such  
as the number of files.)  
Data disc:  
Approx. 45 minutes (including time for  
finalization)  
• When recording videos for about 40 minutes  
in the FHD mode to a 8.5 GB DVD-R DL  
disc. (This may vary according to conditions  
such as the number of files.)  
• GZ-MC100, GZ-MC200, GZ-MC500, GZ-MG20, GZ-MG40, GZ-MG50, and  
GZ-MG70 cannot be used.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When connected to a PC  
USB 2.0, USB 1.1 *1  
USB cable (USB cable provided with Everio can also be used)  
Interface  
Interface cable  
EN  
ES  
Supported operating WindowsXP Home Edition, WindowsXP Professional  
system  
Windows VistaHome Basic, Windows VistaHome  
Premium  
(Macintosh is not supported.)  
Data buffer capacity 2 MB  
Data transfer rate  
(for USB 2.0)  
Writing  
DVD-R: Maximum 8x  
DVD-RW: Maximum 6x  
DVD-R DL: Maximum 6x  
Reading  
DVD-R: Maximum 8x  
DVD-RW: Maximum 8x  
DVD-R DL: Maximum 8x  
CD-R: Maximum 24x *2  
CD-RW: Maximum 24x *2  
CD-ROM: Maximum 24x  
Compatible discs  
(8 cm discs cannot  
be used)  
Writing  
DVD-R, DVD-RW, DVD-R DL  
Reading  
DVD-R, DVD-RW, DVD-R DL, CD-ROM, CD-R,  
CD-RW  
Supported software PowerProducer 4 NE (provided with Everio)  
CyberLink Power2Go 5.5 Lite (provided with CU-VD50)  
*1 If you are using a USB 1.1 cable, it will take approximately 3 hours to write one  
DVD.  
*2 Any CD recorded using the packet-write method is not supported.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Printed in Malaysia  
0608MNH-SW-VM  
© 2008 Victor Company of Japan, Limited  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Portable Generator CD 7 THRU CD 15 User Manual
InFocus Projector IN112 User Manual
John Deere Grinder AT 3305 J User Manual
JVC Camera Accessories VF HP840U User Manual
JVC Digital Camera GR DX78 User Manual
JVC Microcassette Recorder BR HD50 User Manual
JVC VCR RX 774RBK User Manual
KitchenAid Mixer 5KPM50BWH4 User Manual
Konica Minolta Oxygen Equipment PULSOX 300 User Manual
Korg Switch KF4 User Manual