DVD PLAYER/MEMORY CARD READER
Before operation
2
3
XV-NP1SL
Preparations
Basic operations
8
Advanced operations
Audio/Video files playback
13
21
Changing the initial settings 26
Additional information
31
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located on the rear, bottom or
side of the cabinet. Retain this information
for future reference.
Model No.
Serial No
LET0234-001A
[J/UJ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Table of contents
Check that you have all the following accessories supplied to you.
If anything is missing, consult your dealer immediately.
Supplied accessories................................................................1
About this manual .....................................................................1
Precautions................................................................................1
Table of contents.......................................................................1
• Audio/video cable (Yellow/White/Red) (× 1)
• Remote control unit (× 1)
• R6P(SUM-3)/AA(15F) battery (× 2)
• AC power plug adaptor (× 1) (for PX model ONLY)
Before operation................................................... 2
About playable media ..............................................................2
About this manual
Preparations ......................................................... 3
• The display window information and OSD (On Screen Display)
menu items are put in brackets [ ] in the operation procedures.
• Usable disc(s) for each operation/function is (are) referred to by
the icons;
Connections.............................................................................3
Using the remote control unit...................................................6
Care and handling of discs ......................................................6
Basic operations .................................................. 8
Turning on/off the player..........................................................8
Initial setup ..............................................................................8
Basic playback.........................................................................9
Resuming playback ...............................................................10
Various speed playback ........................................................11
Locating the beginning of a scene or song............................12
Precautions
Notes on the power cord
• When you are away on travel or otherwise for an extended
period of time, remove the plug from the wall outlet. A small
amount of power (2.7 W; 3.0 W for PX model) is always
consumed while the power cord is connected to the wall outlet.
• When unplugging the player from the wall outlet, always pull the
plug, not the power cord.
Advanced operations......................................... 13
Playing from a specific position .............................................13
Changing the playback order.................................................15
Repeat playback....................................................................16
Changing the language, sound and scene angle ..................17
Special picture/sound effect ..................................................18
Menu bar functions................................................................19
• Do not handle the power cord with wet hands!
Avoid moisture, water and dust
• Do not place the player in moist or dusty places.
• If water gets inside the player, turn off the power and remove
the plug from the wall outlet, then consult your dealer. Using the
player in this state may cause a fire or electrical shock.
Avoid high temperatures
• Do not expose the player to direct sunlight or place it near a
Audio/Video files playback................................ 21
heating device.
Outline ...................................................................................21
Basic operations....................................................................22
Direct selection for JPEG files ...............................................23
Repeat playback....................................................................23
Slide show playback ............................................................24
Music slide show playback ....................................................25
Changing the picture of the opening display .........................25
Notes on installation
• Select a place which is level, dry and neither too hot nor too
cold between 5° C and 35° C (41° F and 95° F).
• Leave sufficient distance between the player and the TV.
• Do not install the player in a place subject to vibrations.
• Do not put heavy objects on the player.
To prevent malfunction of the player
Changing the initial settings ............................. 26
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic objects, such as wires, hairpins,
coins, etc. into the player.
Selecting preferences............................................................26
Limiting playback by children.................................................29
• Do not block the vents. Blocking the vents may damage the
player.
Additional information....................................... 31
To clean the cabinet
Names of parts and controls..................................................31
AV COMPU LINK remote control system ..............................33
Troubleshooting.....................................................................34
Specifications ........................................................................35
Appendix A: Country/Area code list for Parental Lock...........36
Appendix B: Table of languages and their abbreviations ......37
Appendix C: Digital output signal chart..................................37
Appendix D: Glossary............................................................38
• Use a soft cloth. Follow the relevant instructions on the use of
chemically-coated cloths.
• Do not use benzene, thinner or other organic solvents and
disinfectants. These may cause deformation or discoloring.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Before operation
Unplayable discs
About playable media
The player does not play back discs listed below. If you try to play
back these discs, noise may generate causing damage to
speakers.
Playable disc types
Discs with the following marks can be played back on the player.
• DVD-RW discs written in the VR format
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM, PHOTO CD,
SACD
DVD VIDEO
SVCD
Video CD
Audio CD
In addition, the player does not play:
• Unfinalized discs
• Discs of irregular shape or discs with tape, seals or paste on
either the label side or playback side. Playing back these discs
may damage the player.
The DVD Logo is a trademark.
The player can also play back the following discs:
• DVD-R and DVD-RW discs written in the DVD VIDEO format
and finalized.
• CD-R and CD-RW discs written in the SVCD, Video CD or
Audio CD format and finalized.
• CD-R and CD-RW discs written in MP3/WMA/JPEG/MPEG-4 in
accordance with the “ISO 9660” format. (For details, see page
21.)
Playable memory cards
This player has two types of the exclusive insertion slot for the
memory cards; one is the 4 in 1 slot for SD card (SD), Multi
Media Card (MMC), SmartMedia (SM), and Memory Stick (MS),
the other for CompactFlash (CF).
You can play back the following files:
• MP3, WMA, JPEG, and MPEG-4 (simple profile/asf format)
NOTE
If a disc gets dirty, scratched or warped, or due to the disc
characteristics or recording conditions, it may take considerable
time for the player to read the content, or the player may not be
able to play back such discs.
Requirements for memory cards
• Format: Fat 12/16
• Voltage type: 5 V type is available except SmartMedia.
• Storage type: Up to 128 MB (256 MB type is also available for
only SD card and CompactFlash).
The player can play back audio signals recorded in MIX-MODE
CD, CD-G, CD-EXTRA and CD TEXT.
• Protection: Secure MMC card and Magic Gate Memory Stick
are not available.
• For CompactFlash: Type
Region code of DVD VIDEO
This player can play back DVD VIDEO discs whose region code
• For Memory Stick: Memory Stick Pro is not available.
numbers include “1.”
NOTES
Examples of playable DVD VIDEO discs:
• The playback order may differ from that of the other device such
as a digital still/video camera.
• The memory cards initialized by PC are not available.
• The player may be unable to play back some CompactFlash
which are available for the high speed reading/writing.
• The player may be unable to play back some memory cards
due to thier characteristics or recording conditions.
• Memory cards are precision instruments. DO NOT impact,
bend, drop, or wet them.
1 2
3 4
1 2 3
4 5 6
ALL
1 5
1
NOTE
The player’s region code is printed on the rear of the player.
SD, Secure SD, MultiMediaCard, SmartMedia, CompactFlash,
Memory Stick are trademarks of their respective product
companies.
Color system format
This player accommodates the NTSC system, and also can play
back discs recorded with PAL system whose Region Code
numbers include “1.”
Note that the PAL video signal on a disc is converted to an NTSC
signal and output.
Notes on copyright
Check the copyright laws in your country before recording from
DVD VIDEO, SVCD, Video CD, Audio CD, MP3, WMA, JPEG,
and MPEG-4 discs.
Recording of copyrighted material may infringe copyright laws.
Digital audio formats
The player supports the following digital audio formats (see page
38 “Glossary” for descriptions of each audio format):
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Linear PCM, Dolby Digital, DTS (Digital Theater Systems)
NOTE
Depending on the player’s [DIGITAL AUDIO OUTPUT] setting,
digital audio signals may not be output as they are recorded on
the disc. See “DIGITAL AUDIO OUTPUT” on page 28 for details.
Notes on discs
• With some DVD VIDEO discs, the player starts playback
automatically after inserting the disc.
• The image may be sometimes poor or noisy due to defects in
the disc itself.
• With some discs, operations described in this manual may not
be possible.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connections
Before using the player, connect the player to a TV and/or
amplifier.
NOTE
If your TV has an AV COMPU LINK terminal, you can use the AV
COMPU LINK function. See “AV COMPU LINK remote control
system” on page 33 for details.
Before making connections
• Do not connect the AC power cord until all other
connections have been made.
• In the following description, “TV” may be substituted with
“monitor” or “projector.”
• Terminal names used for other components may be different
from those used in the following description.
• Connect VIDEO OUT of the player directly to the video
input of your TV. Connecting VIDEO OUT of the player to a
TV via a VCR may cause a monitor problem when playing
back a copy-protected disc. You may also have a monitor
problem when connecting the player to an integrated TV/
Video system.
Connecting to a TV
The following sections A to C describe TV connections where
only a TV is connected to the player so that you will hear audio
from the TV.
NOTE
If your TV has a monaural audio input instead of stereo, you need
to use an optional audio cable which converts stereo audio output
to monaural.
A Connecting to a conventional TV
TV
IN
Yellow
VIDEO
L
A
N
IG
S
C
O
R
E
O
T
K
ID
N
I
V
White
E
E
T
L
L
O
U
P
E
M
S
E
R
M
O
T
F
C
E
V
A
L
p
i
0
0
8
8
Set the VIDEO SIGNAL SELECTOR to “480i.”
4
4
UDIO
A
T
H
IG
R
VIDEO SIGNAL
SELECTOR
Red
REMOTE
T
N
E
N
O
P
M
PR
O
C
480p
480i
O
E
ID
Audio/video cable
(supplied)
PB
V
Y
The player
T
U
Yellow
L
O
E
ID
IA
X
A
V
O
C
O
E
ID
-V
T
M/STREAM
F
E
L
S
L
A
IC
T
P
O
T
U
O
L
A
IT
T
IG
H
White
D
IG
R
T
U
O
IO
D
U
A
Red
B Connecting to a TV with an S-video jack
NOTE
If your TV has an S-VIDEO input, you can get better picture
quality by connecting it with the S-VIDEO output of the player
using an S-video cable instead of connecting the video input of
the TV to the VIDEO jack of the player.
When using the S-VIDEO output jack, do not connect the
COMPONENT VIDEO OUT jacks on the player.
TV
IN
S-VIDEO
VIDEO
L
A
N
IG
S
O
R
E
O
T
K
IN
L
ID
V
C
E
E
L
T
O
U
P
E
M
S
E
R
M
O
T
F
C
E
V
A
L
White
p
i
0
0
Set the VIDEO SIGNAL SELECTOR to “480i.”
8
8
4
4
UDIO
A
T
H
IG
R
VIDEO SIGNAL
Red
S-video cable
(not supplied)
SELECTOR
T
N
E
N
O
P
M
PR
O
C
O
E
ID
PB
V
REMOTE
Y
The player
480p
480i
T
U
O
L
O
E
ID
IA
X
A
V
O
C
O
E
ID
-V
T
M/STREAM
F
E
L
S
L
A
IC
T
P
O
T
U
O
L
A
IT
T
IG
H
D
IG
R
T
White
U
O
IO
D
U
A
Audio cable
(not supplied)
Red
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
C Connecting to a TV with component jacks.
You can enjoy picture of high-fidelity color reproduction by
connecting the COMPONENT VIDEO OUT jacks on the player to
your TV.
About the scanning mode
Depending on the material source format, DVD VIDEO discs
can be classified into two types; film source and video source
(note that some DVD VIDEO discs contain both film source
and video source). Film sources are recorded as 24-frame-per-
second information, while (NTSC) video sources are recorded
as 30-frame-per-second (60-field-per-second interlaced)
information.
NOTES
• Connect “Y” to “Y,” “PB” to “PB” (CB), “PR” to “PR” (CR) correctly.
• If your TV has component video input jacks of BNC type, use an
adapter which converts a pin jack to a BNC jack (not supplied).
When the player plays back a film source material,
uninterlaced progressive output signals are created using the
original information. When a video source material is played
back, the player interleaves lines between the interlaced lines
on each to create the interpolated picture and outputs as the
progressive signal.
Progressive scan video playback available
In the Progressive scanning mode, you can enjoy high quality
picture with less flickers when the COMPONENT VIDEO OUT
jacks are connected to a TV or monitor that supports the
progressive video input.
TV
Red
PR
IN
PB
Y
Blue
IN
T
N
E
N
S-VIDEO
VIDEO
O
P
M
O
C
VIDEO SIGNAL
SELECTOR
L
T
A
N
F
E
White
IG
L
S
REMOTE
O
R
E
O
T
K
IN
L
ID
V
C
E
E
L
T
O
U
P
E
M
S
E
R
M
O
480p
480i
C
V
UDIO
A
A
p
i
0
0
8
8
4
T
H
4
IG
R
Green
Red
T
N
E
N
O
P
M
PR
O
C
O
E
ID
PB
V
Y
Red
Component video cable (not supplied)
The player
T
U
O
L
E
ID
IA
X
A
V
O
C
O
E
ID
-V
T
CM/STREAM
F
E
L
S
A
IC
T
P
O
T
O
L
A
IT
T
IG
H
D
IG
R
T
U
O
IO
D
White
U
A
Green
Blue
Audio cable (not supplied)
Red
Selecting the VIDEO SIGNAL SELECTOR position
Source type of DVD VIDEO
• If your television equipped with component jacks does not
support the progressive scanning mode
Set the VIDEO SIGNAL SELECTOR to “480i.”
• If your television equipped with component jacks supports the
progressive scanning mode
Setting of
[PICTURE SOURCE]
Film source
Green
Video source
AUTO
FILM
Red
Green
Red
Green
Red
Set the VIDEO SIGNAL SELECTOR to “480p.”
• If you want to select the scanning mode between the interlace
and progressive modes (depending on the source condition, or
when connecting more than one television, etc.)
VIDEO (NORMAL)/
(ACTIVE)
Set the VIDEO SIGNAL SELECTOR to “REMOTE.”
Thus you can select the mode from the remote control unit.
* While stopped in the Progressive scanning mode, the
PROGRESSIVE indicator is lit in red regardless of the
[PICTURE SOURCE] selection.
NOTE
NOTES
You must change the VIDEO SIGNAL SELECTOR position while
the player power is off. Otherwise, the changed setting is not
effective.
• The Progressive scanning mode works only when you connect
the player’s COMPONENT VIDEO OUT jacks to a progressive
TV.
Activating the Progressive scanning mode using the remote
control unit
When the player is turned on and the VIDEO SIGNAL
SELECTOR is set to “REMOTE,” press and hold down VFP -
PROGRESSIVE SCAN for a few seconds.
• There are some progressive TV and High-Definition TV sets
that are not fully compatible with the player, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the
Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set,
contact your local JVC customer service center.
The scanning mode switches between the Progressive scanning
and Interlaced scanning modes.
• All JVC progressive TV and High-Definition TV sets are fully
compatible with the player (Example: AV-61S902).
When the scanning mode is set to the Progressive mode, the
PROGRESSIVE indicator on the front panel turns on.
Depending on the [PICTURE SOURCE] setting on the
[PICTURE] preference display (see page 27) and whether the
current DVD VIDEO disc is film-source or video-source, the color
of the indicator differs, as shown in the table below.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connecting to optional audio equipment
Connecting to a stereo audio amplifier/receiver
Connect the player’s AUDIO OUT (LEFT/RIGHT) jacks to any
line-level inputs (such as AUX, DVD, CD, etc.) of an audio
amplifier or receiver.
Amplifier or receiver
IN
L
A
N
IG
S
O
R
E
O
T
K
IN
L
ID
V
C
E
E
L
T
O
U
P
E
M
S
E
R
M
O
T
F
White
C
E
V
A
L
p
0
8
4
4
i
0
8
UDIO
A
T
H
IG
R
Red
T
N
T
E
N
O
P
M
PR
O
C
O
E
ID
PB
V
Y
The player
U
Audio cable (not supplied)
O
L
O
E
ID
IA
X
A
V
O
C
O
E
ID
V
T
CM/STREAM
F
E
-
S
L
A
IC
T
P
O
T
U
O
L
A
IT
T
IG
H
D
IG
R
White
T
U
O
IO
D
U
A
Red
Connecting to a digital audio device
NOTES
You can enjoy sound of enhanced quality by connecting the
• Connect the player and the digital audio device by using either
an optical digital cable or a coaxial digital cable.
• It is not recommended to use the digital jacks for dubbing.
When recording the sounds (DVD VIDEO, SVCD, Video CD or
Audio CD) played back on the player, record them through the
analog jacks.
• Depending on the disc, no signal may be output from the
DIGITAL OUT. Make an analog connection in this case.
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference
display correctly according to the connected digital audio
equipment. If setting made for [DIGITAL AUDIO OUTPUT] is
incorrect, loud noise may be generated causing damage to
the speakers (see page 28).
player’s DIGITAL OUT (either OPTICAL or COAXIAL) jack to a
digital input of an amplifier, etc., using an optical or coaxial digital
cable. The digital audio signal on a disc will be transferred directly
from the player. If the connected digital audio equipment is a
Dolby Digital or DTS decoder or an amplifier with a built-in
decoder, you can enjoy high-quality surround sound.
Digital equipment
IN
L
A
IC
T
P
O
IN
L
A
L
A
DIGIT
N
IG
S
L
O
R
E
IA
O
K
IN
L
X
ID
T
A
V
C
E
E
T
O
O
T
L
C
U
P
F
E
M
E
S
E
L
R
M
O
C
V
A
p
0
8
4
4
i
0
D
8
DV
T
H
IG
R
T
N
E
N
O
P
M
PR
Coaxial digital cable (not supplied)
O
C
O
E
ID
PB
V
Y
The player
T
U
O
L
O
E
ID
IA
X
A
V
O
C
O
E
ID
-V
T
M/STREAM
F
E
L
S
L
A
IC
T
P
O
T
U
O
L
IT
T
Audio cable (not supplied)
IG
H
IG
R
T
U
O
IO
D
U
A
Optical digital cable (not supplied)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connecting the power cord
When all the audio/video connections have been made, connect
the AC power plug to the wall outlet. Make sure that the plugs are
inserted firmly.
Remote sensor
Point the top of the remote control unit toward the remote sensor
as directly as possible. If you operate it from a diagonal position,
the operating range (approx. 5 m) may be shorter.
The STANDBY indicator lights in red.
Remote sensor
NOTE
(ONLY for PX model)
Use the supplied AC power plug adaptor when inserting the
larger plug to the wall outlet.
Warning
• Disconnect the power cord:
- if you are not going to use the player for a long time.
- before cleaning the player.
- before moving the player.
• Do not:
- connect or disconnect the power cord with wet hands.
- pull the power cord when disconnecting it, as this may
damage the cord and cause fire, electric shock, or other
accidents.
Caution
• Do not alter, twist or pull the power cord, or put anything heavy
on it, which may cause fire, electric shock, or other accidents.
• If the cord is damaged, consult a dealer and have the power
cord replaced with a new one.
Using the remote control unit
Care and handling of discs
If a disc gets dirty, dusty, scratched or warped, playback sound
and picture may be deteriorated. Take proper precautions when
handling discs.
To install batteries
Open the compartment cover, and place the two supplied R6P
(SUM-3)/AA(15F) batteries in the remote control unit according to
the polarity markings (“+” and “–”) inside the compartment. Then
replace the cover.
Handling
• Do not touch the surface of the disc.
• Do not damage, stick paper to, or use any adhesive on either
the label side or playback side.
Storing discs
• Keep discs in their cases. If discs are piled on top of one
another without their protective cases, they can be damaged.
• Do not put discs in a location where they may be exposed to
direct sunlight, or where the humidity or temperature is high.
Avoid leaving discs in a car!
Cleaning discs
• Wipe with a soft dry cloth, moving from the center outwards. If a
disc is difficult to clean, wipe with a cloth moistened with water.
The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic, replace
the batteries.
Precautions of the safe use of batteries
Observe the following precautions for the safe use of batteries. If
they are used improperly their lives will be shortened, they may
burst or their contents may leak.
• Remove the batteries from the remote control unit if it is not
going to be used for a long period of time.
• Never use record cleaners, petrol, alcohol or any anti-static
agents.
• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix
them with other refuse, or throw them into an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of different types,
when replacing them.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
3 Release TV/VIDEO - CANCEL.
4 Try to operate the TV by pressing TV
STANDBY/ON
.
If your TV turns on or off, you have successfully set the
control signal.
Numeric buttons
NOTES
• When you purchased the player the manufacturer code is set to
“JVC” (01).
• If there is more than one code listed for the manufacturer of
your TV, try them one by one until you succeed.
Operating the TV
Set the TV - DVD switch on the remote control unit to “TV.”
TV
DVD
The following buttons can be used for operating the TV.
Turns the TV on or off.
TV
To use the remote control unit for TV
operation
Switches the TV input mode between TV and
VIDEO.
TV/VIDEO
CANCEL
Setting the remote control signal for operating your
TV
Selects the TV channels directly.
TV1
TV-/--
10
*For some TVs, pressing “+10” functions as the
“100+,” while “10” functions as the ENTER button
if your TV requires pressing the ENTER button
after selecting a channel number.
1
TV0
0
1 Set the TV - DVD switch to “TV.”
Mutes the TV sound.
MUTING
+10
2 While holding down TV/VIDEO - CANCEL,
enter the manufacturer code of your TV listed
below by using the numeric buttons (0 to 9),
and then press ENTER.
Changes the TV channels.
CH
+
Example:
CH
To enter the manufacturer code “01”: Press “0,” “1,” then
-
ENTER.
Adjusts the TV sound volume.
VOL
-
VOL+
Manufacturer code list
Manufacturer
AIWA
No.
36
Manufacturer
MIVAR
No.
29
BEIJING
CCE
22
NEC
20
To control the volume of a JVC’s amplifier or
receiver
02
NOBLEX
NOKIA
22
CHANGHONG
DAEWOO
FERGUSON
FINLUX
34
31
Pressing the AMP VOL + button raises the audio volume of a
JVC’s amplifier or receiver, while pressing the – button lowers the
volume.
17, 37
27
PANASONIC
PEONY
04, 11
34, 38, 39
10, 17, 21
02
30
PHILCO
PHILIPS
RCA
FUNAI
32
AMP
VOL
GRADIENTE
GRUNDIG
HITACHI
ITT
15, 20
19
05
12, 33, 34,
35
SAMSUNG
10
28
SANYO
SEARS
SHARP
SONY
13, 16
13
JINXING
38
01, 23, 24,
25
06
JVC
07
KONKA
40
18
02
03
TCL
41
LG (GOLDSTAR)
MAGNAVOX
MITSUBISHI
THOMSON
TOSHIBA
ZENITH
26
08, 14
09
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
• OPEN
• CLOSE
• NO DISC
STANDBY indicator
0
7 3
NOTES
• Even if you turn off the player, the player is not disconnected
from the AC power source as long as it is connected to the wall
outlet. This state is called standby mode. In this state, the player
consumes a very small amount of power.
• You can change the picture of the opening display. (See page
25.)
Initial setup
You can set the display language, TV monitor type and digital
output before using the player, by following the procedure below.
1 Press CHOICE for a few seconds to bring up
the first page of the DVD PLAYER SET UP
display.
The pull-down menu of the [ON SCREEN LANGUAGE] is
already open.
DVD PLAYER SET UP
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
NOTE
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
FRENCH
SPANISH
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the player.
TV
DVD
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
ON SCREEN LANGUAGE options
About invalid operation icon
When you press a button, and if the player does not accept its
2 Press 5/∞to select the desired language.
You can select the on-screen language for the preference
displays, etc. from among ENGLISH, FRENCH, and
SPANISH.
operation,
appears on your TV screen. Operations are
occasionally unacceptable even if
is not displayed.
Note that some operations may not be accepted. For example,
some discs may not allow rapid advance/reverse or slow-
motion playback.
3 Press ENTER.
The second page is shown, in which the pull-down menu of
the [MONITOR TYPE] is already open.
DVD PLAYER SET UP
MONITOR TYPE
PICTURE SOURCE
SCREEN SAVER
BACKGROUND
4:3 L.B.
16:9
4:3 LB
Turning on/off the player
4:3 PS
MP3
Press DVD STANDBY/ON
on the remote
control unit or press on the front panel.
The STANDBY/ON indicator on the front panel, which lights
in red during standby, lights in green.
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE
MONITOR TYPE options
The left and right sides of the display window are illuminated.
The opening display appears on the TV screen, and the following
messages may appear at the bottom of the opening display.
4 Press 5/∞to select the desired monitor type.
For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].
For a wide-screen TV, select [16:9]. (See page 27.)
NOW READING
Message area
• NOW READING (The player is reading the disc information.)
• REGION CODE ERROR! (The region code of the DVD VIDEO
disc does not match the player. The disc cannot be played
back.)
• CANNOT READ THIS DISC
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
5 Press ENTER.
The third page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
Basic playback
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
D RANGE CONTROL
OUTPUT LEVEL
DOLBY DIGITAL/PCM
OFF
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
1 Press 0(or OPEN/CLOSE on the remote
control unit) to open the disc tray.
2 Place a disc in the disc tray.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE
With the label side up
DIGITAL AUDIO OUTPUT options
6 Press 5/∞to select a desired digital output
signal type.
Set this item correctly when you connect the player to an
external surround decoder or D/A converter. See “DIGITAL
AUDIO OUTPUT” on page 28. (If you do not connect the
player to such a device, you do not have to set this item.)
• When connecting to other digital device, select
[PCM ONLY].
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a Dolby Digital decoder/DTS decoder/
MPEG decorder, select [STREAM/PCM].
SIVE
ES
R
OG
PR
• To insert an 8-cm disc, place it in the inner recess.
3 Press 3.
The player starts playback from the beginning.
7 Press ENTER.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu
may be shown on the TV screen. From the menu, you can select
a desired item to be played back.
The TV screen returns to the opening display.
To change the brightness of the display window
Press DIMMER on the remote control unit.
You can select the display window brightness from three levels,
or off.
If the brightness is set to off, nothing will be shown on the
display. In this case, the illumination lamp on the front panel is
also turned off.
For DVD VIDEO
1 Press 5/∞/2/3to select a desired item.
2 Press ENTER.
The player starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item.
The player starts playback of the selected item.
NOTES
• Do not insert an unplayable disc. (See page 2.)
• When inserting a disc on the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc may be damaged
when the disc tray is closed, or you may not be able to remove
the disc from the player.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
About On-screen guide icons
You may see the following icons displayed over the picture.
They have the following meanings.
: Appears at the beginning of a scene recorded from
multiple angles (see page 17).
: Appears at the beginning of a scene recorded with
multiple audio languages (see page 17).
: Appears at the beginning of a scene recorded with
multiple subtitle languages (see page 17).
Resuming playback
The player can memorize the position on a disc where you
interrupt playback, and resume playback from that position later.
There are three resume modes; ON, OFF and DISC RESUME.
The mode is initially set to ON when you purchased the player.
• You can select the mode using the preference display (see
page 28).
When the resume mode is “ON”
To check the playback status
When you press 7, the player stops playback and memorizes the
interrupted position. The TV screen shows “RESUME STOP” and
the RESUME indicator lights up in the display window.
The memory of the interrupted position is not cleared if you turn
off the player.
When you turn off the player after setting the resume function,
simply press 3. The player is turned on, and playback starts from
the interrupted position.
You can see the current selection number (the title/chapter
number for DVD VIDEO or track number for SVCD/Video CD/
Audio CD), time information (the track or chapter time while
stopped, or elapsed track or chapter time during playback) and
the transport status (stop, playback, pause, etc.) on the TV
screen.
Press ON SCREEN.
Note that the memory is cleared if you open the disc tray.
Example: for DVD VIDEO
When the resume mode is “DISC RESUME”
When you press 7, the player stops playback and memorizes the
interrupted position. The TV screen shows “RESUME STOP” and
the RESUME indicator lights up in the display window.
Current transport
status
Current chapter
number
Transfer rate
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
The memory of the interrupted position is not cleared if you open
the disc tray or turn off the player.
Current title number
Current chapter
time
Hint
Note that pressing ON SCREEN again brings up the menu bar
under the status bar, from which you can access various
functions. See page 19 for details about the menu bar.
The player memorizes interrupted positions for the last 30 discs
played. Storing a new interrupted position will erase the
interrupted position stored for the first disc.
To turn off the status bar
Press ON SCREEN repeatedly until the status bar goes off.
To clear the memory
Press 7while the disc is stopped.
To stop playback completely
Press 7.
Hint
If you press 0during playback, the player stops playback and
opens the disc tray.
To stop playback temporarily
Press 8.
To resume playback, press 3. (See the following item.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
During playback, press ¡ or 1on the
remote control unit.
To resume playback
You can select from 2 times (1.5 times for only the forward
playback of DVD VIDEO), 5 times, 20 times and 60 times (for
DVD VIDEO only) normal speed. Pressing 3returns the
player to normal playback.
When the resume mode is “ON”
While the disc you interrupted playback is
still on the disc tray, press 3.
The player resumes playback from the position where
playback was interrupted.The TV screen shows “RESUME
PLAY.”
During playback, hold down ¢or 4.
Playback is advanced or reversed at 5 times normal speed.
NOTE
During rapid playback, the sound will be muted except when
playing an Audio CD, and when playing a DVD VIDEO at 1.5
times normal speed. For Audio CD discs, the sound will be heard
intermittently.
To play back from the beginning
Press 7before pressing 3to start playback.
When the resume mode is “DISC RESUME”
1 Press 0to insert a disc for which the player
has stored an interrupted position.
The TV screen shows “RESUME STOP.”
x1.5 Quick Playback with sound
2 Press 3.
The TV screen shows “RESUME PLAY” and the player
resumes playback from the position where playback was
interrupted.
When you select 1.5 times normal speed playback, the disc is
played back with sound.
• The subtitle does not go off.
• The sound may be heard intermittently.
To play back from the beginning
After inserting the disc, press 7 before pressing 3to start
playback.
• If the sound of a DVD VIDEO disc is recorded in Dolby Digital or
DTS format, stereo linear PCM signals are output. With some
DVD VIDEO discs, the sound quality and volume may alter, or
the sound may be out of tune.
• To switch from rapid reverse playback to x1.5 Quick Playback,
first press 3, then press ¡once.
NOTES
• If you change the [RESUME] setting from [DISC RESUME] to
[OFF] or [ON], you cannot resume playback of a disc whose
“resuming” position is stored. However, when you again set
[RESUME] to [DISC RESUME], you will then be able to resume
playback of the disc.
To advance a still picture frame by frame
• When you resume playback, set the [RESUME] setting to [DISC
RESUME] before removing a loaded disc.
• If you interrupt the playback of a disc for which an interrupted
position has already been stored, the memory will be updated
with the new interrupted position.
While paused, press 8.
• For a double-sided DVD VIDEO disc, the player regards each
side as a different disc. Therefore, to resume playback of such a
disc, the disc must be inserted with the same side down.
• When the player memorizes an interrupted point for a disc, it
also memorizes Audio, Subtitle and Angle settings.
• The player may not resume playback exactly from the
interrupted point. In the case of an SVCD/Video CD disc with
PBC function, the player may resume playback from a point
slightly earlier or later than the point where playback was
interrupted.
Each time you press 8, the still picture advances to the next
frame.
Pressing 3returns to normal playback.
To play back in slow motion
• When you change Video CD playback mode to program or
random play, the memory of the interrupted position goes off,
then the player cannot resume playback.
• Pressing DVD/CARD cancels the memory of the interrupted
position of the playback.
You can select from 1/32 times, 1/16 times, 1/4 times and 1/2
times normal speed.
During playback, press 8, then press ¡(to
play forward slow motion), or 1(to play
reverse slow motion, for DVD VIDEO disc
only).
Various speed playback
Pressing 3returns to normal playback.
NOTE
During slow motion playback, the sound will be muted.
To advance or reverse playback rapidly
while monitoring
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Locating the beginning of a scene or
song
For DVD VIDEO: During playback, you can skip a chapter or title,
depending on the disc configuration.
For SVCD/Video CD: During playback without PBC function, you
can skip a track.
For Audio CD: During playback or while in stop mode, you can
skip a track.
Numeric buttons
To skip forward, press ¢.
To skip backward, press 4.
Using the numeric buttons
For DVD VIDEO/Audio CD: During playback or while in stop
mode
For SVCD/Video CD: During playback without PBC function or
while in stop mode
Press the numeric buttons to specify the
number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
To replay the previous scenes (One touch
replay function)
The player starts playback from the beginning of the
selection.
During DVD VIDEO playback, press
The playback position moves back 10 seconds before the
current position.
.
NOTES
• Depending on the disc type and the player status, what is
specified differs:
NOTES
Player
status
• This function works only within the same title, though it works
between chapters.
Disc type
What is specified
• This function may not work with some DVD VIDEO discs.
DVD VIDEO
title
While
stopped
SVCD/Video CD/Audio CD
DVD VIDEO
track
chapter
track
During
playback
SVCD/Video CD/Audio CD
• During DVD VIDEO playback, if a menu is shown on the TV
screen, the numeric buttons may be used for selecting an item
in the menu.
About screen saver function
A television monitor may have an image burned into it if a static
image is displayed for a long time. To prevent this, the player
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu, is displayed for
over 5 minutes.
When the screen saver function is activated, the TV screen
gets darker.
Pressing any buttons will release the screen saver function.
See “SCREEN SAVER” on page 27.
• When a still picture of JPEG/MPEG-4 files are played back,
the screen saver function does not work.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Locating a desired scene from the menu of
a SVCD/Video CD with PBC
Numeric
buttons
Some SVCD/Video CD discs support the PBC function. PBC is
an abbreviation of “Playback Control.” Some SVCD/Video CD
discs recorded with PBC have their own menus, such as a list of
the songs of the disc. You can locate a specific scene by using
the PBC menu.
1 In stop mode, press 3.
A disc menu appears on the TV screen.
2 Press the numeric buttons to select the
desired item.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The player starts playback of the selected item.
To return to the menu, press RETURN.
NOTE
Make sure that the TV - DVD switch on the
Hint
TV
DVD
remote control unit is set to “DVD” when
using the 5/∞/2/3, numeric and TV/
VIDEO - CANCEL buttons for controlling
the player.
If something like [NEXT] or [PREVIOUS] appears on the TV
screen, pressing ¢advances to the next page, and pressing
4returns to the previous page.
About PBC (Playback Control)
Playing from a specific position
Some SVCD/Video CD discs support the PBC function.
The PBC function allows you to enjoy menu-driven operation
and high-resolution still images which have a resolution four
times greater than moving pictures.
• To play a PBC-compatible SVCD/Video CD disc without
activating the PBC function, press the numeric buttons
instead of 3to start playback.
Locating a desired scene from the DVD
menu
• To activate the PBC function again,
press 7to stop playback, then press 3.
DVD VIDEO discs generally have their own menus which show
the disc contents. These menus contain various items such as
titles of movies, names of songs, or artist information, and display
them on the TV screen. You can locate a desired scene using the
DVD menu.
Specifying a desired title
1 While a DVD VIDEO disc is inserted, press
TOP MENU or MENU.
1 During playback, press TITLE/GROUP.
The menu appears on the TV screen.
[--] is shown in the title display area of the display window.
2 Press 5/∞/2/3to select a desired item, then
press ENTER.
2 Press the numeric buttons to specify a title to
be played.
The player starts playback of the selected item.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Hints
• Some DVD VIDEO discs may also have a different menu which
appears when MENU is pressed.
• See the instructions of each DVD VIDEO disc for its particular
menu.
The player starts playback from the specified title.
• With some discs, you can select items by entering the
corresponding number using the numeric buttons, which may
cause the player to automatically start playback.
NOTE
This function may not work with some DVD VIDEO discs.
NOTE
The MENU button does not work while stopped.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 Press the numeric buttons (0 to 9) to enter
the desired time.
The specified time is displayed in the pull-down menu.
Numeric
buttons
Example (for DVD VIDEO)
To play back from 2(H):34(M):00(S)
Press 2, 3, then 4.
Example (for SVCD/Video CD/Audio CD)
To play back from 23(M):40(S)
Press 2, 3, then 4.
You do not have to press “0” to enter the trailing zeros (for the
last two digits in the example above).
To correct a mistake
Press 2repeatedly to move back to the digit where you
entered a wrong number, and reenter the correct one.
4 Press ENTER.
Locating a desired position in the current
title or track (Time search)
The player starts playback from the specified time.
To dismiss the menu bar
Press ON SCREEN.
You can play a disc from the desired position by specifying the
time from the beginning of the current title (for DVD VIDEO) or
the disc (for SVCD/Video CD/Audio CD).
Hint
“10” and “+10” buttons are not used with this function.
NOTES
For DVD VIDEO/Audio CD: During playback
For SVCD/Video CD: In any condition except SVCD/Video CD
playback with PBC
• Some DVD VIDEO discs do not contain time information, and
the time search function cannot be used.
• The time search function cannot be used during program
playback.
1 Press ON SCREEN twice.
The menu bar appears on the TV screen.
2 Press 2/3to move
to
, then press
ENTER.
The pull-down menu for entering time appears.
Screen example for DVD VIDEO
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
OFF
CHAP.
1/3
1/5
1/3
TIME _:__:__
Screen example for Audio CD
TRACK 33 TIME
25:58
OFF
PROG. RND.
TIME __:__
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To check the program contents
Changing the playback order
During playback, press 7. Playback stops and the program table
is shown.
When the player is playing back an Audio CD and the program
table is not shown, you can bring up the table by carrying out
steps 1 to 3.
During SVCD/Video CD playback, you can check the program
contents via the menu bar.
To play back in a specific order (Program
play)
To stop program playback
Press 7.
By programming tracks, you can play up to 99 tracks in any order.
You may program the same track more than once.
To clear the program
While stopped and the program table is shown, press 7.
1 In stop mode, press ON SCREEN twice.
The menu bar appears on the TV screen.
PROG.
2 Press 2/3to move
to
.
To exit the program mode
After clearing the program, press ON SCREEN.
Screen example for Audio CD
TRACK 33 TIME
25:58
NOTES
OFF
PROG. RND.
• When the disc tray is opened or the player is turned off, the
program is cleared.
• During AUDIO CD playback, you can select previous or next
tracks by pressing ¢/4.
3 Press ENTER.
The program table appears.
• During VCD/SVCD playback, you cannot search for the portion
The PRGM indicator lights up in the display window.
on the discs by pressing ¡/1.
• During program playback, you can repeat playback.
4 Press the numeric buttons to specify tracks
in the desired order.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
To play back in random order (Random play)
The total program time
1 In stop mode, press ON SCREEN twice.
Total Program Time
00:25:12
PROGRAM
The menu bar appears on the TV screen.
No.
TrackDisc
1
2
3
4
5
2
3
7
4
3
5
6
1
5
4
2
3
4
6
RND.
2 Press 2/3to move
to
.
Screen example for Audio CD
TRACK 33 TIME 25:58
6
7
OFF
PROG. RND.
8
9
10
3 Press ENTER.
The player starts random playback.
USE NUMERIC KEYS TO PROGRAM TRACKS.
With an SVCD/Video CD disc, the menu bar is automatically
dismissed.
CANCEL DELETES THE LAST STEP. 7DELETES ALL.
During random playback, the RND indicator lights up in the
display window.
Selected track number
After playing all tracks of the disc, the player stops the disc
and exits the random playback mode.
To correct the program
Press 5/∞to move
to the track to be corrected, then
press TV/VIDEO - CANCEL. The track is erased and the
subsequent programmed tracks move up.
Pressing 7clears all the programmed tracks.
To stop and quit random playback
Press 7. The player stops playback and exits the random
playback mode.
5 Press 3to start program playback.
NOTES
With an Audio CD disc, the program table remains on the TV
screen during program playback. (Pressing ON SCREEN
brings up the status bar.)
• During random playback, you can repeat playback.
• Random playback mode will be canceled in the following cases:
- When ejecting the loaded disc
- When the Control screen appears on the TV
- When turning off the power
When all of the programmed tracks have finished playback,
the player stops and the program table appears again.
Note that the program remains.
• During program playback, you cannot edit the program
contents.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To repeat a desired part (A-B repeat
playback)
First make sure:
• The player is in playback mode except SVCD/Video CD
playback with PBC.
1 Press ON SCREEN twice.
The menu bar appears on the TV screen.
2 Press 2/3to move
to
, then press
ENTER.
The pull-down menu for repeat mode selection appears.
3 Press 5/∞to select [A-B].
4 Press ENTER at the beginning of the part you
Repeat playback
want to repeat (point A).
The pull down menu disappears.
To repeat the current selection or all tracks
A-
The repeat icon shows
.
5 Press ENTER at the end of the part you want
to repeat (point B).
For DVD VIDEO: During playback
A-B
The repeat icon shows
.
For SVCD/Video CD/Audio CD: In any condition except SVCD/
Video CD playback with PBC
The player locates “A” and starts repeat playback between
“A” and “B.”
The [
] indicator lights in the display window.
Press REPEAT.
If you press REPEAT in stop mode, press 3to start
playback.
Each time you press REPEAT, the repeat mode cycles
among All repeat, Repeat 1 and off.
The indication on the display window shows the selected
repeat mode.
To quit A-B repeat playback
A-B
Press 2/3to move
to
, and press ENTER. The A-B
repeat mode turns off, then normal playback continues.
NOTE
: Repeats the current title for DVD VIDEO or all tracks
The A and B points must be set in the same title/chapter/track.
for SVCD/Video CD/Audio CD.
1: Repeats the current chapter for DVD VIDEO or the
current track for SVCD/Video CD/Audio CD.
No indication: The repeat mode is off.
A window which indicates the current repeat mode will be
displayed on the TV screen. The mode indication on the window
is same as the one on the menu bar.
(Repeat mode example on the TV screen)
CHAP
To stop repeat playback
Press 7.
When a DVD VIDEO disc is set, the unit stops playback and quits
the repeat mode.
When an SVCD, Video CD or Audio CD disc is set, the unit stops
playback but does not quit the repeat mode.
To quit repeat playback
Press REPEAT until the repeat mode indicator goes off in the
display window.
Hint
When the program playback mode is active with an SVCD, Video
CD or Audio CD, the repeat mode changes in the same manner.
Note, however, that in the “
” mode the player repeats all the
programmed tracks instead of all tracks on the disc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Press 5/∞or AUDIO to select the desired
audio.
Changing the language, sound and
scene angle
Each time you press 5/∞or AUDIO, the audio changes.
For DVD VIDEO (example)
To select the subtitle language (SUBTITLE)
For SVCD
Some DVD VIDEO and SVCD discs contain more than one
subtitle language. You can choose a desired one from them.
For Video CD
Hint
At the beginning of the part where the subtitles are recorded,
appears on the TV screen (except when the [ON SCREEN
GUIDE] preference is set to [OFF]).
3 Press ENTER.
You can hear the selected audio.
The audio selection window is dismissed.
1 During playback, press SUBTITLE.
NOTES
The subtitle selection window appears on the TV screen.
• The audio selection window will automatically disappear if you
do not change the audio for several seconds.
1/3
• For DVD VIDEO, the selected language may be abbreviated on
the TV screen. See “Appendix B: Table of languages and their
abbreviations” on page 37.
ENGLISH
2 Press 5/∞or SUBTITLE to select the subtitle.
To select a scene angle of DVD VIDEO
(ANGLE)
Each time you press 5/∞or SUBTITLE, the subtitle
language changes.
3 Press ENTER.
Subtitles are displayed in the selected language.
The subtitle selection window is dismissed.
You can enjoy a variety of scene angles if the DVD VIDEO disc
contains “multi-angle” parts, where multiple cameras were used
to shoot the same scene from different angles.
NOTES
• An SVCD disc can have up to four subtitles. Pressing 5/∞
cycles through those channels regardless of whether the
subtitles are recorded or not.
Hint
• The subtitle selection window will automatically disappear if you
do not change the subtitle for several seconds.
• For DVD VIDEO, the selected language may be abbreviated on
the TV screen. See “Appendix B: Table of languages and their
abbreviations” on page 37.
At the beginning of a “multi-angle” part,
screen (except when the [ON SCREEN GUIDE] preference is set
to [OFF]).
appears on the TV
1 During playback, press ANGLE.
The angle selection window appears on the TV screen.
1/3
To change the audio language or sound
(AUDIO)
1
2 Press 5/∞or ANGLE to select the desired
angle.
The audio selection setting allows you to change the audio
language of a movie.
Each time you press 5/∞or ANGLE, the angle changes.
Hint
3 Press ENTER.
At the beginning of the part where multiple audio tracks are
You can see the picture from the selected angle.
The angle selection window is dismissed.
recorded,
appears on the TV screen (except when the [ON
SCREEN GUIDE] preference is set to [OFF]).
NOTE
1 During playback, press AUDIO.
The angle selection window will automatically disappear if you do
not change the angle for several seconds.
The audio selection window appears on the TV screen.
1/3
ENGLISH
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Press 2/3to select the desired preset.
Each time you press the button, the VFP mode changes as
follows.
Set the video type most suitable to the current program or the
room conditions.
Selected preset
USER 1
GAMMA
MID
BRIGHTNESS
CONTRAST
+
4
+10
SATURATION +10
TINT
+10
SHARPNESS
Y DELAY
LOW
+
2
Special picture/sound effect
Parameter
[NORMAL]: for watching TV in a general room.
[CINEMA]: for watching a movie software in a room with
suppressed light.
To zoom in pictures
[USER 1] [USER 2]: you can adjust parameters that affect
the picture character and store the settings as a user
preset. See the next step.
1 During playback or while paused, press
3 To define a user setting, press 5/∞ to select
ZOOM.
a parameter to be edited from the following.
Pressing ZOOM causes the player to zoom in on the image.
Each time you press ZOOM, the magnification is changed
(1.5, 2 and 4 times).
• GAMMA
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained.
Available range: LOW/MID/HIGH.
• BRIGHTNESS
2 Press 5/∞/2/3to move the zoomed position.
Adjust this if the picture is bright or dark on the whole.
Available range: –16 (darkest) to +16 (brightest).
• CONTRAST
To return to the normal playback
Select the normal size by pressing ZOOM repeatedly.
Adjust this if the far and near position is unnatural.
Available range: –12 to +12.
• SATURATION
Adjust this if the picture is whitish or blackish.
Available range: –16 (blackest) to +16 (whitest).
• TINT
NOTE
While zoomed, the picture may look coarse.
To adjust the picture character (VFP)
Adjust this if the appearance of flesh tone is unnatural.
Available range: –16 to +16.
• SHARPNESS
Adjust this if the picture is indistinct.
Available range: LOW/HIGH.
• Y DELAY
Adjust this if the picture looks separately/overlapped.
Available range: –2 to +2.
The VFP (Video Fine Processor) function allows you to adjust the
picture character according to the type of programming, picture
tone or personal preferences.
1 During playback, press VFP - PROGRESSIVE
4 Press ENTER.
SCAN.
A window for setting parameters appears.
The VFP mode selection window appears on the TV screen.
• If you press the VFP-PROGRESSIVE button too long, the
button works for changing the scanning mode (see page 4)
SATURATION
+ 4
instead of the VFP function.
Selected parameter
5 Press 5/∞ to adjust the level of the
parameter.
The higher value enhances the effect for each item other than
“GAMMA” and “SHARPNESS.”
6 Press ENTER.
Repeat steps 3 to 6 if you want to set other parameters.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To dismiss the VFP mode selection window
Menu bar functions
Press VFP - PROGRESSIVE SCAN.
NOTE
The window for VFP mode selection and parameter setting
disappear if no operation is made for about 10 seconds.
To bring up the menu bar
1 When a disc is inserted, press ON SCREEN.
A status bar for the type of disc inserted will appear on the TV
screen.
See page 10 for details about the status bar.
To change sound field (SOUND EFFECT)
2 Press ON SCREEN again.
A menu bar for the type of disc inserted will appear under the
status bar.
Using the Sound Effect function, you can change the sound field.
1 During playback, press SOUND EFFECT.
(for DVD VIDEO)
The Sound Effect indication appears on the TV screen.
TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
2 Press SOUND EFFECT to select the desired
OFF
CHAP.
1/3
1/5
1/3
mode.
Each time you press the button, the Sound Effect mode
changes as follows:
(for SVCD)
TRACK 33 TIME
25:58
SOUND EFFECT:1
SOUND EFFECT:2
OFF
PROG. RND.
PROG. RND.
PROG. RND.
ST1
-/4
OFF SOUND EFFECT:3
(for Video CD)
• As the value becomes bigger, the Sound Effect works
stronger.
TRACK 33 TIME
25:58
OFF
ST
To deactivate the Sound Effect
Press SOUND EFFECT repeatedly until “OFF” appears on the
(for Audio CD)
TRACK 33 TIME 25:58
TV screen.
OFF
NOTE
The Sound Effect indication disappears if no operation is made
for about few seconds.
To dismiss the menu bar and status bar
Press ON SCREEN.
Basic operation procedure
1 Press 2/3to select the icon you want to
work with.
The selected icon is pointed by
.
2 Press ENTER.
With many icons, an appropriate pull-down window appears,
however, there are some exceptions.
NOTES
• A mark or text on the menu icon for the function or mode
currently selected is shown in green.
• Some functions are not available during playback. (You cannot
move
to the associated icon when it is not available.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Menu bar functions for DVD VIDEO
Menu bar functions for SVCD/Video CD/
Audio CD
Time mode selection
During playback, selects the time mode shown in the display
window and in the status bar.
Time mode selection
Selects the time mode shown in the display window and in the
status bar.
Press ENTER to select the time mode from the following.
• TOTAL: Current title elapsed time
• T.REM: Current title remaining time
• TIME: Current chapter elapsed time
• REM: Current chapter remaining time
Press ENTER to select the time mode from the following.
• TIME: Current track elapsed time
• REM: Current track remaining time (while in stop mode,
current track total time)
• TOTAL: Disc elapsed time
• T.REM: Disc remaining time (while in stop mode, disc total time)
Repeat mode (See also page 16)
Selects the repeat mode during playback.
Repeat mode (See also page 16)
Selects the repeat mode.
1. Open the pull-down window.
2. Press 5/∞to select the repeat mode from the following.
• CHAPTER: Current chapter repeat
1. Open the pull-down window.
2. Press 5/∞to select the repeat mode from the following.
• TRACK: Current track repeat
• TITLE:
• A-B:
Current title repeat
A-B repeat
• OFF:
Repeat mode deactivated
• ALL:
• A-B:
• OFF:
All track repeat
A-B repeat
Repeat mode deactivated
3. Press ENTER to make the selected repeat function active.
3. Press ENTER to make the selected repeat function active.
Time search (See also page 14)
Specifies a time from the beginning of the current title as the
point from which to begin playback.
Time search (See also page 14)
Specifies a time from the beginning of the disc as the point from
which to begin playback.
CHAP.
Chapter search
During playback, specifies a desired chapter to be played back
from.
PROG.
Program playback (See also page 15)
While stopped, specifies the playback order of tracks.
1. Open the pull-down window.
2. Press numeric buttons (0 to 9) to enter a desired chapter
number. (For example, to specify “10,” press 1, then 0.)
3. Press ENTER to begin playback from the specified chapter.
RND.
Random playback (See also page 15)
While stopped, activates random playback.
Audio selection (See also page 17)
During playback, selects the audio language or sound track.
Audio selection (See also page 17)
During SVCD/Video CD playback, selects the audio channel(s).
1. Open the pull-down window.
2. Press 5/∞to select a desired audio language or sound track.
3. Press ENTER to begin playback with the selected audio.
1. Open the pull-down window.
2. Press 5/∞to select a desired audio channel(s).
3. Press ENTER to play back with the selected audio channel(s).
Subtitle selection (See also page 17)
During playback, selects the subtitle language.
Subtitle selection (See also page 17)
During SVCD playback, selects the subtitle.
1. Open the pull-down window.
2. Press 5/∞to select a desired subtitle language.
3. Press ENTER to begin playback with the selected subtitle.
1. Open the pull-down window.
2. Press 5/∞to select a desired subtitle.
3. Press ENTER to begin playback with the selected subtitle.
Angle selection (See also page 17)
During playback, selects a desired scene angle in a multi-angle
part.
1. Open the pull-down window.
2. Press 5/∞to select a scene angle.
3. Press ENTER to begin playback with the selected scene angle.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/Video files playback
Notes for making your own disc using a CD-R/CD-
RW disc
Outline
• Use “ISO 9660” as the disc format.
• The player does not support “packet writing (UDF format)”
discs.
• The player supports discs recorded with up to five multiple
sessions.
The player can play back MP3/WMA/JPEG/MPEG-4 (simple
profile/asf file) files on either a personally recorded CD-R/RW
disc and memory card, or a commercially available CD.
You can select and play back files using the Control display on
the TV screen.
• Some media may not play due to media characteristics or
recording conditions.
• The player may be unable to play back the media due to the
characteristics or recording conditions.
Notes for making files/groups
• If a file name includes even one 2-byte character, the player
may not show the file name correctly.
Precautions
• The player supports up to 12 characters as the group/file
names.
• The player can only recognize files with one of the following
extensions, which can be in any combination of upper and lower
case:
- For MP3 files, “.MP3,” “.mp3.”
- For WMA files, “.WMA,” “.wma,”
- For JPEG files, “.JPG,” “.JPEG,” “.jpg,” “.jpeg.”
- For MPEG-4 files, “.ASF,” “.asf.”
• For MP3 files:
About files and folders (groups) on the disc or the
memory card
• Files are sometimes grouped into folders by genre, album, etc.
In this manual, “group” is also referred to as “folder.”
• A folder which has one or more files is regarded as a group.
• The player can detect and play back the groups which are
located up to the fifth layer.
• The files in the Control display are arranged by the alphabetical
order of extensions as follows: “asf,” “jpeg,” “mp3”, and “wma.”
• Time required for reading the media contents may vary for
different media, depending on the numbers of folders (groups)
and files recorded, etc.
- It is recommended that you record your material at a 44.1 kHz
sampling rate, using the 128 kbps data transfer rate.
- ID 3 Tag is not available.
• Files which do not belong to any folder are grouped into “group
1.”
- MP3i and MP3 Pro are not available.
• For WMA files:
• The player recognizes up to 999 files per group, and up to 250
groups per disc/memory card. Files other than MP3/WMA/
JPEG/MPEG-4 files also count in the 999 total.
- WMA Tag is not available.
- Make sure that the copyright feature is set to off.
- We recommend you to record your material at a bit rate of 64
kbps or higher.
- The player supports WMA files recorded with a bit rate of 48
kbps or higher. The player cannot play back WMA files
recorded with a bit rate under 48 kbps.
• For JPEG files:
Max. 250 groups per media
Max.999 files
per group
File 1.mp3
File 2.mp3
File 3.mp3
Group 1
- We recommend you to record your material at a 640 x 480
pixel resolution.
- This player supports the baseline JPEG format.
- The player does not support a baseline-fomatted picture of
more than 5120 x 3413 pixels. Make sure that the pictures
pixel size is 5120 x 3413 pixels or less.
- This player cannot play back a progressive JPEG file of more
than 2048 x 1536 pixels.
Group 2
File 4.jpg
File 1.jpg
File 2.jpg
File 3.jpg
File 4.jpg
File 5.jpg
File 6.jpg
• For MPEG-4 files:
- This player supports the type of simple profile and asf as
MPEG-4 files.
Group 4
Group 3
- The player can play back simple profile recorded not on a PC
but on a digital still/video camera.
- The size of the playback screen will be the same size as it is
recorded.
- Some recorded files may not be able to be played back
depending on file characteristics, kind of digital still/video
cameras, or recording conditions.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/Video files playback
Notes for inserting and removing memory cards
• Before you insert a memory card into a card slot, open the door
on the front panel and make sure of the slot type and the
direction of insertion as illustrated.
• Always use the single type of memory card at a time.
• Before removing a memory card during playback, stop the
playback.
• When playing back a disc, the electrostatic noise may
restart the playback from the beginning.
NOTE
Press here to remove the inserted
CompactFlash with the player held.
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the player.
TV
DVD
Metal terminal
CF
Basic operations
When you insert a disc or memory card with groups and files, the
Control display that shows the contents of the medium
automatically appears on the TV screen.
You can specify and play back the desired group/file from the
Control display using the following procedure.
SD or
1 Make sure that the cursor bar is in the left
(group) column on the Control display.
Select these sections to show
MMC
SM
MS
Ridge
Current media
the upper layer.
• When inserting or removing a memory card, hold the player
firmly.
SD CARD
GROUP
WMA
MP3
MPEG4
SLIDESHOW
MIX
--
MOVIE01.asf
MOVIE02.asf
PICT01.jpg
PICT02.jpg
PICT03.jpg
MUSIC01.mp3
MUSIC02.wma
Selected
track
Current
group
Group column
File column
• If it is in the right column, press 2to move it to the left
column.
• If you want to select the other medium while both a disc and
memory cards are inserted, press DVD/CARD before
starting playback. When the player accesses a memory
card, the DVD/CARD lamp on the front panel lights up
• While a memory card is inserted, keep the door on the front
panel open.
• Close the door after removing memory cards.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/Video files playback
2 Press 5/∞ to move the bar to a desired
group, then press ENTER.
Direct selection for JPEG files
• In the right column, files in the selected group are shown.
You can select a particular JPEG file from the thumbnail screen.
3 Press 5/∞ to select the desired file, then
1 Press THUMBNAIL/LIST while a JPEG file is
press ENTER.
selected on the Control display.
The desired file is played back.
• When you press 3 (SELECT), the continuous playback
starts from the selected file.
The thumbnail screen appears on the TV. Up to nine
thumbnails from the selected file at a time can be displayed
on the screen.
• When selecting a group on the Control display, the
thumbnail screen does not appear.
• You can change the files on the list by pressing 4/¢.
To pause playback
Press 8.
2 Press 5/∞/2/3 to select the desired picture
on the thumbnail screen, then press ENTER.
Pressing 3 resumes normal playback.
The desired picture is played back.
• You can change the thumbnails by pressing 4/¢. All
the JPEG files in the single group are displayed every nine
thumbnails.
To reverse or advance playback rapidly
Press 1/¡ during playback of MP3/WMA/MPEG-4.
• For MP3/WMA: Each time you press 1 or (¡), the player
reverses (or advances) playback, rapidly changing the playback
speed as follows: x2, x4, x6, and x8.
• For MPEG-4: The playback speed of MPEG-4 files depends on
the files’ characteristics.
Repeat playback
During playback or while stopped, press
REPEAT.
• Each time you press REPEAT while a file is selected, the
repeat mode changes as follows:
To zoom in a picture
Press ZOOM.
“ZOOM...” appears on the TV.
• Each time you press ZOOM, the magnification is changed—1.5,
2 times, and 4 times for JPEG file; 2 times, and 4 times for
MPEG-4 file.
• The four-time magnification may not work for some MPEG-4
files according to their resolutions.
• Pressing 5/∞/2/3 moves the zoomed position during playback
of JPEG file.
To cancel the zoom function, select the normal size by pressing
ZOOM repeatedly.
Display
window
Function
Control display
REPEAT 1
Repeats the current
file.
1
Repeats all files in the
current group.
REPEAT GROUP
Repeats all files on
the media.
REPEAT ALL
No indication
To rotate/reflect a still picture
While the still picture is played back:
• Pressing 3 rotates the picture by 90° clockwise.
• Pressing 2 rotates the picture by 90° counterclockwise.
• Pressing ∞ reflects the picture vertically.
• Pressing 5 reflects the picture horizontally.
The repeat mode is off.
If you press REPEAT while stopped, you need to press
ENTER or 3 (SELECT) to start playback.
To stop playback
Press 7.
The Control display appears on the TV.
• Removing the memory card also stops playback.
To stop repeat playback
Press 7.
Note that the repeat mode remains active.
NOTES
To quit repeat playback
During playback, press REPEAT until no repeat icon is shown on
the display window.
• While stopped, press REPEAT until the repeat mode indication
on the Control display goes off.
• Opening the disc tray changes the player to the disc operation
mode after stopping the playback and/or turning off the Control
display for the memory card. In this case, automatic playback of
DVD Video does not work.
• During slide show playback, you cannot rotate/reflect a picture.
• It may take time to show the Control display due to the layer
configuration of the files and groups.
• The elapsed time may be incorrectly indicated on the display
window due to the recording condition of the file.
• The display window cannot show the file number more than
100. When the files numbered over 100th are played back, the
player re-counts file number again from 0.
• The playback information appears on the TV as follows:
- “JPEG DATA ERROR” means that this player cannot play
back the file.
- “JPEG DATA CORRUPTED” means that the file has error but
the player can play back it.
- “NEXT” means the player skips to the next file.
- “PREVIOUS” means the player skips to the previous file.
- “SELECT” means the file is selected on the thumbnail screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/Video files playback
• Each time you press the button, the effect is changed as
follows:
Mode
Type of wipe
1
Scroll wipe 1: The next image slides in from top to
bottom.
2
Scroll wipe 2: The next image slides in from
bottom to top.
3
Shutter wipe 1: The next image slides in vertically
from both sides to center.
4
Shutter wipe 2: The next image slides in vertically
from center to both sides.
5
NOTE
Blind wipe 1: The next image slides in vertically
through 4 slits.
Make sure that the TV - DVD switch on the
TV
DVD
remote control unit is set to “DVD” when
using the 5/∞/2/3 and numeric buttons
for controlling the player.
6
Slide wipe 1: The next image slides in from left to
right.
7
Slide wipe 2: The next image slides in from right
to left.
Slide show playback
8
9
Door wipe 1: The next image slides in horizontally
from both sides to center.
You can display files (still pictures) one after another
automatically.
Door wipe 2: The next image slides in horizontally
from center to both sides.
Press 3 (SELECT) while a JPEG file is
selected on the Control display.
The slide show starts from the beginning of the media.
• The display time varies in size of each file.
10
Window wipe: The next image slides in from each
side to center.
• When MP3/WMA files are in the same group, the music file
playback starts after the slide show playback.
11
Blind wipe 2: The next image slides in horizontally
through 4 slits.
To change the effect on displaying images
You can select the effect of slide show.
RANDOM
NONE
The player selects and applies the effect to each
image randomly.
Press SLIDE EFFECT.
“SLIDE EFFECT MODE :” and the current mode appear on the
TV screen.
Cancels the effect.
To stop slide show playback in the middle
Press 7.
The TV screen returns to the Control display.
• Pressing 3 (SELECT) resumes slide show playback from the
last picture displayed.
To keep showing the current picture
Press 8.
• Pressing 3 (SELECT) resumes slide show playback.
NOTE
During slide show playback, you cannot use the thumbnail and
rotate/reflect functions.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/Video files playback
To repeat music slide show playback
Music slide show playback
Press REPEAT when the Control screen appears on the TV.
• Each time you press REPEAT, the repeat mode changes as
follows:
During slide show playback of JPEG files on the memory card,
you can play back Audio CDs or MP3/WMA files as background
music.
Display
window
Function
When you play back MP3/WMA files as background music, make
a group containing both JPEG files and MP3/WMA files on the
memory card.
• Music slide show is available for JPEG files on the single group.
• Music slide show may not work correctly for the progressive
JPEG format.
Control display
Repeats the current
JPEG file.
REPEAT 1
1
REPEAT GROUP
REPEAT ALL
No indication
Repeats all JPEG files in
the current group.
Slide show with Audio CD playback
1 Insert an Audio CD.
The repeat mode is off.
• When a memory card is playing back (except for a slide
show), playback will stop.
To stop music slide show playback in the middle
Press 8.
2 Insert a memory card containing JPEG files.
The Control display of the memory card appears on the TV.
• When the memory card containing JPEG files is already
selected, press DVD/CARD.
JPEG playback pauses.
When you press 8 again, BGM playback also pauses.
• Pressing 3 (SELECT) or 8 resumes music slide show playback
from the last picture displayed.
3 Press 3 (cursor) to show “MUSIC SLIDE
SHOW” on the Control display.
To stop music slide show playback
Press 7.
• Each time you press the button, the playback mode
alternates between “MUSIC SLIDE SHOW” and normal
playback (no indication).
4 Select a JPEG file on the Control display,
then press 3 (SELECT).
Changing the picture of the opening
display
The first track on the Audio CD is played back and Music
slide show starts.
• You can start Music slide show from the specified track on
the Audio CD by pressing numeric buttons instead of 3
(SELECT).
• You can change the tracks on the Audio CD by pressing
4/¢.
• The playback of the Audio CD stops after all the JPEG files
are played back.
You can change and set the opening display to your favorite
image. See page 28.
1 Play back a JPEG file to be displayed as the
opening display.
When the slide show is started, press 8 to pause the slide
show.
• When a track on an Audio CD is played back as BGM, the
time and track indication is not displayed on the window.
2 Press CHOICE and 2/3 to show PICTURE
menu of the on-screen menu.
Slide show with MP3/WMA playback
• Before starting the following procedure, remove the Audio CD
3 Press 5/∞ to select “BACKGROUND,” then
press ENTER.
from the disc tray.
4 Press 5/∞ to select “SAVE AS
1 Insert a memory card containing a group with
BACKGROUND,” then press ENTER.
both JPEG files and MP3/WMA files.
The Control display for the media appears on the TV.
• When a memory card is already inserted, press DISC/
CARD to show the Control display for that medium.
5 Press 5/∞ to select “YES,” then press
ENTER.
The player starts reading the selected JPEG file, and the
opening screen is changed after reading the file.
• The previous JPEG file is overwritten by the newly saved
file.
2 Press 3 (cursor) to show “MUSIC SLIDE
SHOW” on the Control display.
• Each time you press the button, the playback mode
alternates between “MUSIC SLIDE SHOW” and normal
playback (no indication).
To dismiss the menu screen
Press CHOICE.
3 Select JPEG file on the Control display, then
press 3 (SELECT).
To resume the JVC’s opening screen
Select “STANDARD” in step 4.
Music slide show starts.
• The player plays back the MP3/WMA file from the beginning
in the group. You can change the files by pressing 4/¢.
• You cannot select MP3/WMA files on the other group/media
as BGM.
• The playback of MP3/WMA files stops after all the JPEG
files are played back.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
OTHERS
OTHERS
RESUME
ON
ON SCREEN GUIDE
AUTO STANDBY
ON
OFF
DVD1
AV COMPULINK MODE
PARENTAL LOCK
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
How to set preferences
1 Press CHOICE.
One of the preference on-screen displays appears on the TV
screen.
You can see four icons at the top right of the on-screen
display for the settings.
: LANGUAGE menu
: PICTURE menu
: AUDIO menu
NOTE
Make sure that the TV - DVD switch on the
remote control unit is set to “DVD” when
using the 5/∞/2/3and numeric buttons
for controlling the player.
TV
DVD
: OTHERS menu
2 Press 2/3to select the appropriate icon.
The appropriate display appears on the TV screen.
Selecting preferences
3 Press 5/∞to move
to select the item you
This section refers to the settings which are already made when
you purchase the player. Read this section when you want to
connect this player to a wide-vision TV set, or when you want to
otherwise change the settings according to your preferences and
viewing environment.
want to edit.
The color of the selected item changes.
4 Press ENTER.
A pull-down menu appears over the selected item.
About the Preference display
The Preference display consists of the LANGUAGE, PICTURE,
AUDIO and OTHERS setting displays, each having setting items.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
LANGUAGE
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
OFF
FRENCH
SPANISH
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
ON SCREEN LANGUAGE
ENGLISH
Selected item
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
PICTURE
5 Press 5/∞to select from the options then
PICTURE
press ENTER.
MONITOR TYPE
4:3 LB
AUTO
PICTURE SOURCE
SCREEN SAVER
BACKGROUND
The selected option is set.
• For details about each setting, see the following.
ON
STANDARD
To dismiss a preference display
Press CHOICE.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
AUDIO
NOTES
• While a disc containing MP3/WMA/JPEG/MPEG-4 files or a
memory card is inserted, you cannot bring up any preference
display.
• Some items cannot be changed during disc playback.
• When a preference display is shown on a wide TV screen, the
upper and lower parts of the preference display sometimes may
be cut off. If this happens, adjust the picture size control of the
TV.
AUDIO
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
STREAM/PCM
STEREO
D RANGE CONTROL
OUTPUT LEVEL
NORMAL
STANDARD
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
• When a preference display is shown, you cannot start playing
back a disc.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
[4:3 LB] (Letter Box conversion): select when you connect the
player to a normal (4:3) TV.
When playing back a DVD VIDEO disc recorded in wide picture
format, the picture is shown with black bars at the top and
bottom.
LANGUAGE menu
MENU LANGUAGE
You can select the default menu language to be displayed if it is
contained on a DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN,
JAPANESE, language code from AA to ZU
• If the disc does not have a menu in the selected language, the
disc’s default language will be used.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 37.
• You cannot change the setting during playback.
[4:3 PS] (Pan Scan conversion): select when you connect the
player to a normal (4:3) TV.
When playing back a DVD VIDEO disc recorded in wide picture
format, the picture is zoomed to fill the screen vertically, and the
left and right sides of the image are chopped off.
Note, however, that the picture will be shown in the 4:3 LB
mode even if you select the 4:3 PS mode depending on the
disc.
AUDIO LANGUAGE
You can select the default audio language to be played if it is
contained on a DVD VIDEO disc.
Setting options
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN,
JAPANESE, language code from AA to ZU
• If the disc does not have the selected language, the disc’s
default language will be used.
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 37.
• You cannot change the setting during playback.
SUBTITLE
PICTURE SOURCE
You can select the default subtitle language to be displayed if it is
contained on a DVD VIDEO disc.
This mode selects whether the content on the disc is processed
by field (video source) or by frame (film source). You can obtain
optimal picture quality according to the source type to be played
back by selecting an appropriate option. This setting is available
for both the interlaced mode and progressive scanning mode.
Setting options
OFF, ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN,
ITALIAN, JAPANESE, language code from AA to ZU
• If the disc does not have a subtitle in the selected language, the
disc’s default language will be used.
Setting options
• For details about language codes, see “Appendix B: Table of
languages and their abbreviations” on page 37.
• You cannot change the setting during playback.
VIDEO(NORMAL), VIDEO(ACTIVE), FILM, AUTO
[VIDEO(NORMAL)]: select when playing back a video source
disc with relatively a few movements.
[VIDEO(ACTIVE)]: select when playing back a video source disc
with relatively a lot of movements.
[FILM]: select when playing back a film source disc.
[AUTO]: select when playing back a disc containing both video
and film source materials.
The player recognizes the picture type (film or video source) of
the current disc according to the disc information. Normally,
select this option.
ON SCREEN LANGUAGE
You can select the on-screen display language of the player.
Setting options
ENGLISH, FRENCH, SPANISH
• Some on-screen messages are shown in English regardless of
the setting.
• You cannot change the on-screen language shown on the
Control display.
SCREEN SAVER
You can set the screen saver function to ON or OFF. (See page
12.)
PICTURE menu
Setting options
ON, OFF
MONITOR TYPE
You can select the monitor type to match your TV when you play
back DVD VIDEO discs recorded for wide-screen televisions.
Setting options
16:9, 4:3 LB, 4:3 PS
[16:9] (Wide television screen): select when you connect the
player to a wide-screen (16:9) TV.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
BACKGROUND
D. RANGE CONTROL
You can change and set the opening display to your favorite
image using this menu.
This setting provides optimal audio quality from the analog
AUDIO OUT terminals for listening to DVD VIDEO discs recorded
in Dolby Digital format, at low or middle volume.
Setting options
Setting options
STANDARD, USER, SAVE AS BACKGROUND
[STANDARD]: select when you use the JVC original image as
the opening display (initial setting).
[USER]: select when you use your favorite image as the opening
display. This item will be taken effect after you register a new
image in the next item.
[SAVE AS BACKGROUND]: select when you register a new
image. To register a new image, see “Changing the picture of
the opening display” on page 25.
WIDE RANGE, NORMAL, TV MODE
[WIDE RANGE]: when selected, audio is played back with the
widest dynamic range so that you can enjoy powerful playback
sound.
[NORMAL]: normally, select this option.
[TV MODE]: select if DVD VIDEO disc sound level is lower than
TV program sound level. Thus you can hear sound at a lower
volume clearly.
OUTPUT LEVEL
This setting allows you to attenuate the level of the signal output
AUDIO menu
from the player’s analog AUDIO OUT terminals.
DIGITAL AUDIO OUTPUT
Setting options
To connect the player’s digital output to an external device
equipped with a digital input, this item must be set correctly.
See “Appendix C: Digital output signal chart” on page 37 for
details about the relation between the setting and output signals.
STANDARD, LOW
• If the sound output from the speaker is distorted, select [LOW].
Setting options
OTHERS menu
OFF, PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM
[OFF]: select when you enjoy the analog sound of DVD VIDEO
as 96 kHz. No sound is outputted through the player’s DIGITAL
OUT terminals. When you enjoy the digital sound, do not select
“OFF.”
[PCM ONLY]: select when you connect the DIGITAL OUT jack of
the player to the linear PCM digital input of other audio
equipment.
RESUME
You can select the resume playback mode.
See pages 10 and 11 for details about the resume playback
function.
Setting options
ON, OFF, DISC RESUME
[DOLBY DIGITAL/PCM]: select when you connect the digital
input of a Dolby Digital decoder or an amplifier with a built-in
Dolby Digital decoder.
When this option is selected, playing back a disc recorded by
the MPEG Multichannel format outputs a linear PCM digital
signal.
[STREAM/PCM]: select when you connect the digital input of an
amplifier with a built-in DTS, MPEG Multichannel or Dolby
Digital decoder, or the stand-alone unit of such a decoder.
• With some DVD VIDEO discs that are not fully copy-protected,
a 20 or 24 bit digital signal may be output.
[ON]: when selected, the player can resume playback of the disc
from the position where playback was last interrupted, if the
disc is still in the disc tray.
[OFF]: when selected, the resume function is deactivated.
[DISC RESUME]: when selected, the player can resume
playback of the last 30 discs played. The player retains a
memory of the interrupted positions of the last 30 discs played,
even though they have been removed from the disc tray.
ON SCREEN GUIDE
The player can display “on-screen guide” icons or characters on
the picture, which show what is happening to the disc or the
player.
• When playing a DVD VIDEO or Audio CD disc with DTS, use a
DTS decoder to get correct signals from your speakers.
ANALOG DOWN MIX
To correctly play the audio on a DVD VIDEO disc recorded with
surround multichannel audio, you must set this item properly
according to your audio system configuration.
Example of “on-screen guide” icons:
,
,
Setting options
ON, OFF
[ON]: when selected, the on-screen guide is activated.
Setting options
DOLBY SURROUND, STEREO
[DOLBY SURROUND]: select when listening to multichannel
surround audio with the player’s analog AUDIO OUT terminals
connected to a surround decoder.
[STEREO]: select when listening to conventional two-channel
stereo audio with the player’s AUDIO OUT terminals connected
to a stereo amplifier/receiver or television set, or in case you
want to record the audio from a DVD VIDEO disc to MiniDisc,
cassette, etc.
AUTO STANDBY
When the player is stopped for more than 30 minutes or 60
minutes, the player enters standby mode automatically.
Setting options
60, 30, OFF
AV COMPULINK MODE
You must set this item correctly to use the AV COMPU LINK
system.
Setting options
DVD1, DVD2, DVD3
• See page 33 for details about the AV COMPU LINK function.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
3 While
is pointing to [COUNTRY CODE],
press ENTER to bring up the pull-down
menu.
PARENTAL LOCK
When this option is selected, pressing ENTER on the remote
control unit brings up the PARENTAL LOCK display shown below.
This allows you to restrict children from playing DVD VIDEO
discs.
4 Press 5/∞to select the country code.
Select the code of the country whose standards were used to
rate the DVD VIDEO disc content.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
See “Appendix A: Country/Area code list for Parental Lock”
on page 36.
NONE
_ _ _ _
PARENTAL LOCK
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
UG
UM
US
UY
UZ
VA
VC
NONE
_ _ _ _
• See this page for details about the parental lock setting.
SELECT
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
ENTER
5 Press ENTER.
Numeric buttons
moves to [SET LEVEL].
6 Press ENTER to bring up the pull-down
menu.
In the pull-down menu, [NONE] and levels [8] to [1] are
available.
[NONE] does not restrict playback. Level [1] is the strictest
level. Discs rated higher than the selected level are restricted.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
8
7
6
5
4
3
NONE
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
7 Press 5/∞to select a desired parental lock
level, then press ENTER.
Limiting playback by children
This function restricts playback of DVD VIDEO discs which
contain violent (and other) scenes according to the level set by
the user. For example, if a movie which includes violent scenes
supports the parental lock feature, such scenes which you do not
want to let children view can be cut or replaced with other
scenes.
moves to [PASSWORD].
8 Press the numeric buttons (0 to 9) to enter a
4-digit password.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
1234
To set Parental Lock for the first time
...
SELECT
NEW PASSWORD? PRESS 0 ~ 9 KEY
TO EXIT, PRESS CHOICE.
ENTER
1 Bring up the OTHERS menu.
2 Press 5/∞to move
to select [PARENTAL
LOCK] then press ENTER.
9 Press ENTER.
The parental lock feature is set.
The Parental Lock on-screen display appears on the TV
screen.
moves to [EXIT]. Pressing ENTER again returns to the
[OTHERS] menu of the preference display.
Hint
PARENTAL LOCK
If you want to change the password at step 8, do it before
pressing ENTER.
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
To temporarily release the Parental Lock
Numeric buttons
If the parental level is set to a strict value, some discs may not
play at all.
When you insert such a disc and try to play it, the following
parental lock on-screen display appears on the TV screen, asking
you whether you want the parental lock to be temporarily
released or not.
1 Press 5/∞to move
to [TEMPORARY
RELEASE], then press ENTER.
PARENTAL LOCK
TEMPORARY RELEASE
NOT RELEASE
PASSWORD
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
To change the settings
2 Press the numeric buttons (0 to 9) to enter
your 4-digit password.
You can change the parental lock settings later.
The Parental Lock is released, and the player starts
playback.
If you enter a wrong password, “WRONG! RETRY...” appears
on the TV screen. Enter the correct password.
1 Bring up the OTHERS menu.
2 Press 5/∞to move
to select [PARENTAL
LOCK] and press ENTER.
NOTE
The parental lock on-screen display appears on the TV
screen.
When you enter the wrong password 3 times at step 2 above,
moves to [NOT RELEASE] automatically and 5/∞do not work.
3 While
is pointing to [PASSWORD], press
the numeric buttons to enter your current 4-
digit password then press ENTER.
moves to [COUNTRY CODE] if you enter the correct
password.
If you enter a wrong password, “WRONG! RETRY...” appears
on the TV screen, and you cannot go to the next step.
If you forget your password, enter “8888.” The current
password is deleted and you can set a new password.
4 To change the [COUNTRY CODE] or [SET
LEVEL], press ENTER to bring up the
associated pull-down menu when
pointing to the desired item.
is
5 Press 5/∞to select the desired option then
press ENTER.
If you change the country code, you must reselect the
parental lock level.
6 While
is pointing to [PASSWORD], press
the numeric buttons to enter a 4-digit
password.
The password entered in this step becomes the new
password. If you want to keep the same password as before,
enter the same password.
7 Press ENTER.
moves to [EXIT]. Pressing ENTER again returns to the
[OTHERS] menu of the preference display.
NOTE
If you enter the wrong password more than 3 times in step 3
above,
moves to [EXIT] automatically and 5/∞do not work.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Names of parts and controls
Front panel
1
2
3
4
5
6
7
8
9
0
-
= ~
!
@
9 8(pause) button (10, 11)
1
button (8)
0 DVD/CARD button and lamp (22, 25)
- Display window (see the illustration below)
= Remote sensor (6)
~ PROGRESSIVE indicator (4)
! Memory card slots (22)
2 STANDBY/ON indicator (8)
3 Disc tray (9)
4 0(eject) button (9)
5 4button (11, 12)
6 ¢button (11, 12)
7 7 (stop) button (10, 13)
8 3 (play) button (9, 11)
@ Card eject button (22)
Display window
1
2
3
4
5
6
7 8
9
1 Audio format indicators
2 Disc indicator
3 Group/title/track/chapter indicators
4 Repeat mode indicator
6 Total time/remaining time indicators
7 3(play) / 8(pause) indicators
8 Resume indicator
9 Multi-information window
5 Program/random indicators
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Remote control unit
&
*
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DVD/
TV
DVD
CARD
1
(
)
2
3
4
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV-/--
10
8
TV0
0
9
MUTING
+10
TITLE/
TV/VIDEO
CANCEL
THUMBNAIL
/LIST
_
RETURN
VOL
GROUP
5
6
7
+
¡
CH
+
VOL+
ENTER
8
9
0
£
¢
CH
PREVIOUS
NEXT
CLEAR
SELECT
-
=
~
SLOW
-
SLOW+
VFP
SOUND
EFFECT
ZOOM
!
@
#
$
%
^
PROGRESSIVE
SCAN
ANGLE SUB TITLE AUDIO
SLIDE
AMP
VOL
REPEAT
EFFECT DIMMER
1 OPEN/CLOSE button (9)
2 DVD/CARD button (22, 25)
3 Numeric buttons
4 RETURN button (13)
5 THUMBNAIL/LIST button (23)
6 TOP MENU button (13)
7 Cursor selection (5Up, ∞Down) - CH (+/–) buttons
8 Cursor selection (2Left, 3 Right) - VOL (+/–) buttons
9 CHOICE button (8, 26)
0 4/PREVIOUS button (11, 12, 22)
- 7/CLEAR button (10, 15, 16, 22)
= 3/SELECT button (9, 11, 22)
& Infrared signal window (6)
* TV - DVD switch (7, 8, 13, 22, 26)
( TV STANDBY/ON
) DVD STANDBY/ON
button (7)
button (8)
_ TV/VIDEO - CANCEL button (7, 15)
+ TITLE/GROUP button (13, 23)
¡ MENU button (13)
ENTER button
£ ON SCREEN button (10, 14, 16, 19)
¢ ¢/NEXT button (11, 12, 22)
8button (10, 23)
¡/SLOW+ button (11)
ZOOM button (18, 23)
VFP - PROGRESSIVE SCAN button (4, 18)
AUDIO button (17)
AMP VOL +/– buttons (7)
DIMMER button (9)
~ 1/SLOW– button (11)
!
button (12)
@ SOUND EFFECT button (19)
# ANGLE button (17)
$ SUBTITLE button (17)
% REPEAT button (16, 25)
^ SLIDE EFFECT button (24)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
AV COMPU LINK remote control
system
To AV COMPU LINK
(ll, EX or lll)
The JVC AV COMPU LINK system allows you to enjoy video or
audio with the simplest operation. If your video/audio player (such
as a DVD player, CD player and VCR) and television or/and
amplifier/receiver support the JVC AV COMPU LINK system and
are tied with the JVC AV COMPU LINK cable(s), simply starting
the player will automatically make all necessary settings on the
television and/or amplifier/receiver to allow you to enjoy the
playback.
TV
To AV COMPU
LINK
Receiver
The player
• If you connect the player to a television and receiver via AV
COMPU LINK, set the player’s AV COMPU LINK setting to
DVD1.
IMPORTANT!
Connection and setup
When you make video connection between the player and
another device (such as a receiver and TV) via the composite, S-
video or component jacks, as well as AV COMPU LINK
connection, see also the instruction manual of the other device.
Using an AV COMPU LINK cable, connect the AV COMPU LINK
terminals of each component to one another.
• The player’s AV COMPU LINK setting is controlled using the
OTHERS menu in the preference display. See page 28.
• For information on the connection between a TV and a receiver,
refer to the receiver’s instructions.
Notes for connection
• If you connect the player to a receiver via AV COMPU LINK in a
system including a Dolby Digital decoder, some functions may
not be performed automatically.
To AV COMPU LINK (ll, EX or lll)
• Connect the AUDIO OUT jacks of the player to the audio input
jacks of a receiver indicating “DVD.” Otherwise, the system will
not work correctly.
TV
• There may be no description about connections to the player in
the instruction manual of a television or VCR. However, a
television or VCR with AV COMPU LINK terminals indicating
“II,” “EX” or “III” can be connected to the player.
The player
• If you connect the player to a television via AV COMPU LINK,
set the player’s AV COMPU LINK setting as follows.
- When connecting to the VIDEO-1 input terminal of the
television: DVD2
- When connecting to the VIDEO-2 input terminal of the
television: DVD3
Operation
The JVC AV COMPU LINK system allows you to enjoy video and/
or audio by simply pressing Play on the source component (the
component which plays back the video or audio, such as a DVD
player or VCR). You do not even have to switch on power on the
TV or receiver.
To AV COMPU LINK
(ll, EX or lll)
1 Turn on the main power of the television.
2 Insert a disc (or tape) into the source
TV
The player
component.
To AV COMPU LINK
VCR
3 Press 3of the source component.
The following actions are performed automatically:
• Turning on the television power.
• If you connect the player to a television and VCR via AV
COMPU LINK, set the VCR’s Remote Control Code and the
player’s AV COMPU LINK setting as follows.
- When connecting to the VIDEO-1 input terminal of the
television:
• Setting the source of the television to the external input
(VIDEO-1 or VIDEO-2).
• Turning on receiver power.
• Setting the source of the receiver to the component which has
started playback.
The player’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
- When connecting to the VIDEO-2 input terminal of the
television:
The player’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
MP3/WMA/JPEG/MPEG-4
Troubleshooting
No sound and/or no picture comes out.
\ MP3/WMA/MPEG-4 disc is recorded with the “packet writing
(UDF format).” It cannot be played.
Power
\ Check the files you want to play back.
Power does not come on.
\ Power plug is not inserted securely. Plug in securely.
Files (tracks) are not played in the recorded order.
\ This player plays the files in the alphabetic order. So, the
playback order can vary.
Operation
WMA files cannot be played back.
\ The file is copy protected.
“REGION CODE ERROR!” is shown on the TV screen.
\ Region code of the inserted disc does not match the player.
Check the region code of the disc printed on the disc jacket.
\ The file is recorded with a bit rate under 48 kbps. The player
does not support such WMA files.
MPEG-4 files cannot be played back.
\ The format of the file is not asf.
Operation is not possible.
\ Microcomputer malfunction due to lightning or static electricity.
Turn off the power and unplug the power cord, then connect
the power cord again.
\ Moisture condensation caused by a sudden change of
temperature or humidity. Turn off the power, then turn it on a
few hours later.
\ The disc does not allow the operation, or an unplayable disc is
inserted. Check and replace the disc (see page 2).
[LOCK] is displayed on the display window and the disc tray
does not open.
\ When you press 0while pressing down 7on the player in
standby mode, the tray lock function is activated. The disc tray
cannot be opened or closed in this status. To release this
status, press 0while pressing down 7on the player in
standby mode.
Picture
Picture is noisy.
\ The player is connected to a VCR directly and the copyguard
function is activated. Connect the player so that the picture
signal flows directly to the TV.
\ With some discs, the picture may be blurred when [PICTURE
SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE
SOURCE] to [VIDEO(NORMAL)] or [VIDEO(ACTIVE)].
Picture is distorted when using COMPONENT VIDEO OUT or
S-VIDEO output jack(s).
\ Both the component connection and S-video connection are
made. Disconnect the unused one.
Audio
DVD VIDEO disc playback sound level is lower than TV
broadcast sound level.
\ Set the [D.RANGE CONTROL] preference to [TV MODE] (see
page 28).
Analog audio output is distorted.
\ Set the [OUTPUT LEVEL] preference to [LOW] (see page 28).
The digital sound is not outputted through the player’s
DIGITAL OUT terminals.
\ Set the [DIGITAL AUDIO OUTPUT] preference to other than
[OFF] (see page 28).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Audio characteristics
Specifications
Frequency response
CD (sampling frequency 44.1 kHz):
2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):
2 Hz to 22 kHz
(4 Hz to 20 kHz for DTS and Dolby
Digital bitstream signals)
DVD (sampling frequency 96 kHz)
2 Hz to 44 kHz
Specifications and appearance are subject to change without
prior notice.
General
Readable discs
DVD VIDEO, DVD-R (Video format), DVD-
RW (Video format), SVCD, Video CD, Audio
CD (CD-DA), CD-R/RW (CD-DA, SVCD,
Video CD, MP3/WMA format, JPEG, MPEG-
4)
Dynamic range
Wow and flutter
16 bit: More than 98 dB
20/24 bit: More than 100 dB
Unmeasurable (less than + 0.002%)
Total harmonic distortion
less than 0.006%
Readable cards
Video format
SD card, Multi Media Card, Smart Media,
CompactFlash, Memory Stick
(MP3/WMA format, JPEG, MPEG-4)
* Notes for PX model (Check the specification indication
on the rear panel.)
Power requirements AC 110 V to 240 V
NTSC, 480i (Interlaced scan)/480p
(Progressive scan) selectable
, 50 Hz/60 Hz
Power consumption 12 W (POWER ON), 3 W (STANDBY
mode)
Other
Power requirements*
AC 120 V
Power consumption*
• Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
, 60 Hz
12 W (POWER ON), 2.7 W (STANDBY
mode)
Mass
2.1 kg (4.7 lbs)
Dimensions (W × H × D)
435 mm × 48 mm × 270.5 mm
(17-3/16 inch × 1-15/16 inch × 10-11/16 inch)
Video outputs
COMPONENT (pin jacks)
Y Output: 1.0 Vp-p (75 Ω)
PB/PR Output: 0.7 Vp-p (75 Ω)
VIDEO OUT (pin jack)
1.0 Vp-p (75 Ω)
S-VIDEO OUT (S jack)
Y Output: 1.0 Vp-p (75 Ω)
C Output: 286 mVp-p (75 Ω)
Horizontal resolution
500 lines or more
Audio outputs
ANALOG OUT (pin jack)
2.0 Vrms (10 kΩ)
DIGITAL OUT (COAXIAL)
0.5 Vp-p (75 Ω termination)
DIGITAL OUT (OPTICAL)
–21 dBm to –15 dBm (peak)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
(for page 29)
Appendix A: Country/Area code list for Parental Lock
AD Andorra
ES Spain
LI
Liechtenstein
SE Sweden
ET Ethiopia
LK Sri Lanka
LR Liberia
SG Singapore
SH Saint Helena
AE United Arab Emirates
AF Afghanistan
FI
Finland
Fiji
FJ
LS Lesotho
SI
Slovenia
AG Antigua and Barbuda
FK Falkland Islands
LT
Lithuania
SJ Svalbard and Jan Mayen
SK Slovakia
AI
Anguilla
FM Micronesia (Federated
States of)
LU Luxembourg
LV Latvia
AL Albania
SL Sierra Leone
SM San Marino
AM Armenia
FO Faroe Islands
FR France
LY Libyan Arab Jamahiriya
MA Morocco
AN Netherlands Antilles
AO Angola
SN Senegal
FX France, Metropolitan
GA Gabon
MC Monaco
SO Somalia
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
SR Suriname
GB United Kingdom
GD Grenada
ST Sao Tome and Principe
SV El Salvador
GE Georgia
SY Syrian Arab Republic
SZ Swaziland
AU Australia
GF French Guiana
GH Ghana
MM Myanmar
MN Mongolia
AW Aruba
TC Turks and Caicos Islands
TD Chad
AZ Azerbaijan
BA Bosnia and Herzegovina
BB Barbados
BD Bangladesh
BE Belgium
GI
Gibraltar
MO Macau
GL Greenland
GM Gambia
MP Northern Mariana Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
TF French Southern
Territories
GN Guinea
TG Togo
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
TH Thailand
BF Burkina Faso
BG Bulgaria
TJ
Tajikistan
TK Tokelau
MU Mauritius
BH Bahrain
GS South Georgia and the
South Sandwich
TM Turkmenistan
TN Tunisia
MV Maldives
BI
Burundi
MW Malawi
BJ Benin
GT Guatemala
GU Guam
TO Tonga
MX Mexico
BM Bermuda
TP East Timor
TR Turkey
MY Malaysia
BN Brunei Darussalam
BO Bolivia
GW Guinea-Bissau
GY Guyana
MZ Mozambique
NA Namibia
TT Trinidad and Tobago
TV Tuvalu
BR Brazil
HK Hong Kong
NC New Caledonia
NE Niger
BS Bahamas
BT Bhutan
HM Heard Island and
McDonald Islands
TW Taiwan
TZ Tanzania, United Republic
of
NF Norfolk Island
NG Nigeria
BV Bouvet Island
BW Botswana
BY Belarus
HN Honduras
HR Croatia
HT Haiti
UA Ukraine
UG Uganda
NI
Nicaragua
NL Netherlands
NO Norway
BZ Belize
HU Hungary
UM United States Minor
Outlying Islands
CA Canada
ID
IE
IL
Indonesia
Ireland
Israel
NP Nepal
CC Cocos (Keeling) Islands
CF Central African Republic
CG Congo
US United States
UY Uruguay
NR Nauru
NU Niue
IN
IO
India
UZ Uzbekistan
NZ New Zealand
OM Oman
CH Switzerland
British Indian Ocean
Territory
VA Vatican City State (Holy
See)
CI
Côte d’Ivoire
IQ
IR
IS
IT
Iraq
VC Saint Vincent and the
Grenadines
PA Panama
CK Cook Islands
CL Chile
Iran (Islamic Republic of)
PE Peru
VE Venezuela
Iceland
Italy
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
CM Cameroon
CN China
VG Virgin Islands (British)
VI
Virgin Islands (U.S.)
JM Jamaica
JO Jordan
CO Colombia
CR Costa Rica
CU Cuba
VN Vietnam
VU Vanuatu
JP Japan
PL Poland
WF Wallis and Futuna Islands
WS Samoa
KE Kenya
PM Saint Pierre and Miquelon
PN Pitcairn
CV Cape Verde
CX Christmas Island
CY Cyprus
KG Kyrgyzstan
KH Cambodia
YE Yemen
PR Puerto Rico
PT Portugal
YT Mayotte
KI
Kiribati
CZ Czech Republic
DE Germany
DJ Djibouti
YU Yugoslavia
ZA South Africa
ZM Zambia
KM Comoros
PW Palau
KN Saint Kitts and Nevis
PY Paraguay
QA Qatar
KP Korea, Democratic
People's Republic of
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
ZR Zaire
RE Réunion
KR Korea, Republic of
KW Kuwait
ZW Zimbabwe
RO Romania
RU Russian Federation
RW Rwanda
KY Cayman Islands
KZ Kazakhstan
EC Ecuador
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
EE Estonia
LA Lao People's Democratic
Republic
EG Egypt
EH Western Sahara
ER Eritrea
LB Lebanon
LC Saint Lucia
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
(for pages 17 and 27 )
SU Sundanese
Appendix B: Table of languages and their abbreviations
AA
AB
AF
Afar
FA
Persian
Finnish
Fiji
KM Cambodian
OM (Afan) Oromo
Abkhazian
Afrikaans
FI
KN Kannada
OR Oriya
SV
Swedish
FJ
KO Korean (KOR)
PA
PL
PS
PT
Panjabi
SW Swahili
AM Ameharic
AR Arabic
FO Faroese
FY Frisian
KS
Kashmiri
Polish
TA
Tamil
KU Kurdish
Pashto, Pushto
Portuguese
TE
Telugu
AS
AY
AZ
BA
BE
Assamese
Aymara
GA Irish
KY
LA
LN
LO
LT
Kirghiz
TG Tajik
GD Scots Gaelic
Latin
QU Quechua
TH
TI
Thai
Azerbaijani
Bashkir
GL
Galician
Lingala
RM Rhaeto-Romance
RN Kirundi
Tigrinya
Turkmen
Tagalog
Setswana
GN Guarani
GU Gujarati
HA Hausa
Laothian
Lithuanian
Latvian, Lettish
TK
TL
TN
Byelorussian
RO Rumanian
RU Russian
BG Bulgarian
BH Bihari
LV
HI
Hindi
MG Malagasy
MI Maori
RW Kinyarwanda
TO Tongan
BI
Bislama
HR Croatian
HU Hungarian
HY Armenian
SA
Sanskrit
TR
TS
TT
Turkish
Tsonga
Tatar
BN Bengali, Bangla
BO Tibetan
BR Breton
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
SD Sindhi
SG Sangho
IA
IE
IK
IN
IS
IW
JI
Interlingua
Interlingue
Inupiak
SH Serbo-Croatian
TW Twi
CA Catalan
CO Corsican
CS Czech
SI
Singhalese
Slovak
UK Ukrainian
UR Urdu
SK
SL
Indonesian
Icelandic
Hebrew
MS Malay (MAY)
MT Maltese
Slovenian
UZ
VI
Uzbek
CY Welsh
SM Samoan
SN Shona
SO Somali
SQ Albanian
SR Serbian
Vietnamese
DA
DZ
EL
Danish
Bhutani
Greek
MY Burmese
NA Nauru
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
Yiddish
JW Javanese
NE Nepali
EO Esperanto
ET Estonian
EU Basque
KA
KK
KL
Georgian
Kazakh
NL
Dutch
NO Norwegian
OC Occitan
SS
ST
Siswati
ZU
Zulu
Greenlandic
Sesotho
(for page 28)
Appendix C: Digital output signal chart
Output
Source type
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
OFF
DVD with 48 kHz, 16/20/24 bit
linear PCM
48/ kHz, 16 bit, stereo linear PCM
DVD with 96 kHz, 16/22/24 bit
linear PCM
DVD with DTS
48kHz, 16 bit, stereo linear PCM
DTS bitstream
DVD with Dolby Digital
48 kHz, 16 bit, stereo linear
PCM
Dolby Digital bitstream
Cannot be
outputted
DVD with MPEG Multichannel
SVCD/Video CD/Audio CD
Audio CD with DTS
48 kHz, 16 bit, stereo linear PCM
44.1 kHz, 16 bit, stereo linear PCM
48kHz, 16 bit, stereo linear PCM
MPEG bitstream
DTS bitstream
CD-R/RW or memory card
recorded MP3/WMA
Linear PCM
CD-R/RW or memory card
recorded MPEG-4
Cannot be outputted
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Appendix D: Glossary
480i/480p
Dynamic range
Indicates the number of scanning lines and scanning format of an
image signal. 480i indicates 480 scanning lines with interlace
format, and 480p indicates 480 scanning lines with progressive
format.
The difference between the loudest and softest sounds.
Interlaced scanning
In a conventional video system, a picture is shown on the display
monitor in between lines of two halves. The Interlaced scanning
system places lines of the second half of the picture in-between
lines of the first half of the picture.
ASF
ASF is an abbreviation of “Advanced Streaming Format,” and is a
data compression format for streaming developed by Microsoft
Corporation. ASF can contain the various data types such as
audio, video, and text.
JPEG
A popular file format for still image compression and storage.
JPEG stands for Joint Photographic Experts Group.
There are three sub-types of the JPEG format as follows.
• baseline JPEG: used for digital cameras, the web, etc.
• progressive JPEG: used for the web
Aspect ratio
A ratio which defines the shape of the rectangular picture in a TV.
It is the width of the picture relative to the height. A conventional
TV picture is 4:3 in aspect ratio.
• lossless JPEG: an old type, rarely used now
Bitstream
Linear PCM audio
The digital form of multichannel audio data (e.g., 5.1-channel)
before it is decoded into its various channels.
PCM stands for “pulse code modulation.” Linear PCM is the usual
method for digitally encoding audio without compression, and is
used for the audio tracks on DVD VIDEO discs, Audio CDs, etc.
Chapter/title
Chapter is the smallest division and title is the largest division on
DVD VIDEO. A chapter is a division of a title and similar to a track
for Video CD or Audio CD.
MP3
MP3 is an audio data compression format, which stands for
MPEG-1 Audio Layer 3. Using MP3, you can achieve a data
reduction of about 1:10.
Component video
Video signals with three channels of separate information that
makes up the picture. There are some types of component video,
such as R/G/B and Y/CB(PB)/CR(PR).
MPEG-4
MPEG-4 is an audio/video data compression format, which is
highly efficient and more stable than MPEG-1 and MPEG-2.
Composite video
NTSC (National television system committee)
A black and white and color television system format used in the
U.S.A., Canada, Mexico and Japan.
A single video signal commonly used in most consumer video
products that contains all luminance, color, and synchronization
information.
PAL (Phase Alternation by Line)
A color television system format used extensively in Western
Europe.
Dolby Digital (AC3)
A six-channel system consisting of left, center, right, left rear,
right rear and LFE (Low-Frequency Effect channel, for use with a
sub-woofer) channels. All processing is done in the digital
domain. Not all Dolby Digital discs contain six (5.1) channels of
information.
PBC
PBC stands for “Playback control” and is a method of controlling
disc play for Video CDs (VCD). You are able to interact with the
disc through menus.
Dolby Surround/Dolby Pro Logic
Progressive scanning
Dolby Surround records four channels of front and rear audio in
two channels in a way that allows a decoder to recover the
original four channels for playback. Because the audio is
recorded in two channels, it can be played back naturally by a
two-channel stereo system.
Dolby Pro Logic introduces directional circuits in decoder-side
processing (increasing the level of specific channels and lowering
the level of silent channels) for greater spatial perspective, and
adds a center speaker used primarily for dialog. The result is
enhanced channel separation.
Progressive scanning displays all the horizontal lines of a picture
at one time, as a single frame. A progressive scanning DVD
player converts the interlaced (480i) video from DVD into
progressive (480p) format for connection to a progressive display.
It dramatically increases the vertical resolution.
S-video
A video signal which improves picture quality over standard
composite connections. Used on Super VHS, DVD, high end TV
monitors, etc.
Down-mix
Track
Internal stereo mix of multichannel surround audio by a DVD
player. The down-mix signals are output from stereo output
connectors.
The smallest division on SVCD, Video CD and Audio CD discs.
WMA
WMA is an abbreviation of “Windows Media Audio,” and is an
audio data compression format developed by Microsoft
Corporation. Sound quality of data compressed using WMA is
the same as that of MP3, though the WMA file size is smaller
than that of MP3.
DTS
A Digital Surround audio encoding format configured with six
(5.1) channels, similar to Dolby Digital. It requires a decoder,
either in the player or in an external receiver. DTS stands for
Digital Theater Systems.
Not all DTS discs contain six (5.1) channels of information.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN.
0703KTYMDWJSC
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|