DVD PLAYER
XV-N452S
INSTRUCTIONS
LPT1168-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERʼS MANUAL. AND
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for
installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the product
is operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future reference.
11. Only use attachments/accessories specified by the
manufacturer.
3. Heed all warnings. - All warnings on the product and in
the operating instructions should be adhered to.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution when
moving the cart/product combination to avoid
injury from tip-over.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this apparatus near water. - For example:
near a bath tub, wash bowl, kitchen sink, laundry tub, in
a wet basement; or near a swimming pool; and other
areas located near water.
6. Clean only with dry cloth. - Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturerʼs instructions. - Slots
and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to
protect it from over- heating. The openings should never
be blocked by placing the product on a bed, sofa, rug or
other similar surface. This product should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the product has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
manufacturerʼs instructions have been adhered to.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction . . . . . . . . . . . . . . . . . . .5-8
Operations . . . . . . . . . . . . . . . . .15-21
General Features . . . . . . . . . . . . . . . . . . . . . . .15
Additional Features . . . . . . . . . . . . . . . . . . . . .16
Playing an Audio CD or MP3/WMA file . . . . .17
Programmed Playback . . . . . . . . . . . . . . . . . .18
Repeat Programmed Tracks . . . . . . . . . . . .18
Erasing a Track from Program List . . . . . . .18
Erasing the Complete Program List . . . . . . .18
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . . .19
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . .19
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .19
Moving to another file . . . . . . . . . . . . . . . . . .19
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Rotating the picture . . . . . . . . . . . . . . . . . . .19
About the
Symbol Display . . . . . . . . . . . . . .5
Symbol Used in this Manual . . . . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5
Handling Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . . .5
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . . .6
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control operation . . . . . . . . . . . . . . .8
Remote Control Battery installation . . . . . . . .8
Listening to MP3 music
while watching picture . . . . . . . . . . . . . . . . .19
Playing a DivX Movie file . . . . . . . . . . . . . . . .20
Playing a DVD VR format Disc . . . . . . . . . . . .21
Installation and Setup . . . . . . . . .9-14
Setting up the Player . . . . . . . . . . . . . . . . . . . . .9
DVD Player Connections . . . . . . . . . . . . . . . . . .9
Video and Audio Connections to Your TV . . .9
Audio Connection to Optional Equipment . .10
Displaying Disc Information on-screen . . . . .11
Initial Settings . . . . . . . . . . . . . . . . . . . . . . .11-14
General Operation . . . . . . . . . . . . . . . . . . . .11
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .12
• Menu Language . . . . . . . . . . . . . . . . . .12
• Disc Audio / Subtitle / Menu . . . . . . . . .12
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .12
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . .12
• Display Mode . . . . . . . . . . . . . . . . . . . . .12
• Progressive Scan . . . . . . . . . . . . . . . . .12
• TV Output Select . . . . . . . . . . . . . . . . . .12
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
• Dolby Digital / DTS / MPEG . . . . . . . . .13
• Sample Freq. (Frequency) . . . . . . . . . .13
• DRC (Dynamic Range Control) . . . . . . .13
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . .13
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
• B.L.E. (Black Level Expansion) . . . . . . .14
• DivX(R) VOD . . . . . . . . . . . . . . . . . . . . .14
Reference . . . . . . . . . . . . . . . . . . .22-25
Remote Control Function . . . . . . . . . . . . . . . . . . . .22
Maintenance and Service . . . . . . . . . . . . . . . . .22
Language Codes . . . . . . . . . . . . . . . . . . . . . . . .23
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .24
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .25
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read this
ownerʼs manual carefully and retain it for future
reference.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this ownerʼs manual is not available on that specific
DVD video disc.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Symbol Used in this Manual
Note:
Cleaning Discs
Indicates special notes and operating features.
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
ALL
DVD
VCD
ACD
MP3
WMA
DivX
All discs and file listed below
DVD and finalized DVD R/RW
Video CDs
Audio CDs
MP3 files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
WMA files
DivX files
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
Regional Code
DVD
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
(8 cm / 12 cm disc)
Video CD (VCD/SVCD)
(8 cm / 12 cm disc)
Notes on Regional Codes
Audio CD
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unitʼs regional code or the
disc cannot play.
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
(8 cm / 12 cm disc)
In addition, this unit plays DVD R/RW and CD-R/RW,
Dual disc that contains audio titles, DivX, MP3, WMA,
and/or JPEG files.
This indicates a product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
The Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD R/RW) disc
itself, some CD-R/RW (or DVD R/RW) discs
may not be played on the unit.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
• This DVD player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see
above) to ensure compatible playback.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
ʻSTANDARD DEFINITIONʼ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
a
b
c
d
e
f
g
h
i
j
a 1/' STANDBY/ON
f DISPLAY
Accesses On-Screen Display.
Switches the unit ON and OFF.
b Disc Tray
g x (STOP)
Insert a disc here.
Stops playback.
c Display window
h N (PLAY)
Starts playback.
Shows the current status of the unit.
d Remote Sensor
i . (SKIP)
Point the remote control here.
Returns to the beginning of current chapter or
track or go to the previous chapter or track.
e Z (OPEN/CLOSE)
Opens or closes the disc tray.
j > (SKIP)
Go to the next chapter or track.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
DISPLAY
STANDBY/ON (1/')
Accesses On-Screen Display.
Switches DVD Player ON and OFF.
DVD MENU
OPEN/CLOSE (Z)
Accesses menu on a DVD disc.
Opens and closes the disc tray.
b / B / v / V (left/right/up/down)
Selects an item in the menu.
ENTER (
)
PAUSE/STEP ( X )
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
SKIP (. / >)
Go to next chapter or track.
Returns to the beginning of current
chapter or track or go to the
previous chapter or track.
Confirms menu selection.
SETUP
Accesses or removes Setup menu.
RETURN (O)
Displays the menu of a video CD
with PBC.
STOP (x)
Stops playback.
AUDIO (
)
SCAN (m / M)
Search backward or forward.
Selects an audio language or an
audio channel.
PLAY (N)
Starts playback.
SUBTITLE (
)
Selects a subtitle language.
0-9 numerical buttons
Selects numbered items in a menu.
ANGLE (
)
PROGRAM
Selects a DVD camera angle,
if available.
Enter to program edit mode.
CLEAR
Removes a track number on the
Program List or a mark on the
Marker Search menu.
ZOOM
Enlarges video image.
MARKER
Marks any point during playback.
SEARCH
Displays MARKER SEARCH menu.
TITLE
Displays title menu, if available.
REPEAT
Repeats chapter, track, title or all.
RANDOM
Remote Control operation
Point the remote control at
the remote sensor and press
the buttons.
Remote Control Battery
installation
Plays tracks in random order.
Detach the battery
A-B
cover on the rear
of the remote
Repeats sequence from point A to
point B.
Cautions:
control, and insert
two batteries (size
AAA) with 3 and
# aligned
• Do not mix old and new
batteries and never mix
different types of batteries
such as standard, alkaline,
etc.
correctly.
• Do not put the batteries in
the place where young
children can reach.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
Video and Audio Connections
Setting up the Player
to Your TV
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
Make sure the DVD player is connected directly to the
TV and not to a VCR, otherwise the DVD image could
be distorted by the copy protection system.
S-Video – Connect the S-VIDEO OUT jack on the
DVD Player to the S-Video in jack on the TV using
the S-Video cable (S).
Video – Connect the VIDEO OUT jack on the
DVD player to the video in jack on the TV using
the video cable (V).
DVD Player Connections
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
Audio – Connect the left and right AUDIO OUT
jacks of the DVD Player to the audio left and right
IN jacks on the TV using the audio cables (A).
Do not connect the DVD Playerʼs AUDIO OUT jack
to the phone in jack (record deck) of your audio
system.
Rear of TV
Component Video – Connect the COMPONENT /
PROGRESSIVE SCAN jacks on the DVD Player
to the corresponding jacks on the TV using an Y
PB PR cable (C).
Progressive Scan
• If your television is a high-definition or “digital
ready” television, you may take advantage of
the DVD playerʼs progressive scan output for
the highest possible video resolution.
• Set the Progressive Scan to “On” on the setup
menu for progressive scan signal. (Refer to
page 12).
• Progressive scan does not work with the
analog video connections (yellow VIDEO OUT
jack and S-VIDEO OUT jack).
Rear of
DVD Player
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
Audio Connection to Optional
Equipment
receiver, or stereo system, using the audio cables (A).
Connect the DVD player to your optional equipment
for audio output.
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS):
Rear of DVD Player
Connect one of the DVD Playerʼs DIGITAL AUDIO
OUT jacks (COAXIAL X) to the corresponding jack on
your amplifier. Use an optional digital (COAXIAL X)
audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio
/ video receiver that supports one or more of the
audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
Notes:
• If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
produces a strong, distorted sound or no sound at
all.
Amplifier (Receiver)
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Disc Information
on-screen
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 12 to 14.
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback
information.
To display and exit the Menu:
The displayed items differ depending on the disc
type or playing status.
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1. Press SETUP.
The Setup menu appears.
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
• Title (Track) – Current title (or track).
number/total number of titles (or tracks).
• Chapter – Current chapter number/total number
of chapters.
• Time – Elapsed playing time.
• Audio – Selected audio language or channel.
• Subtitle – Selected subtitle.
• Angle – Selected angle/total number of angles.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3. Use v / V to select the second desired option and
Note:
then press B to move to the third level.
If any button is not pressed for a few seconds, the on-
4. Use v / V to select the desired setting then press
ENTER to confirm your selection.
screen display disappears.
Some items require additional steps.
5. Press SETUP or PLAY (N) to exit the Setup
menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Mode
LANGUAGE
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or a monitor that is compatible
with a progressive scan signal, set Progressive Scan
to On.
To Turn ON progressive scan:
Connect component video out of this unit to the input
of your TV or monitor, set your TV or monitor to
Component Input.
Menu Language
Select a language for the Setup menu and then
on-screen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
1. Select “Progressive Scan” on the DISPLAY menu
(disc audio), subtitles, and the disc menu.
then press B.
Original – Refers to the original language in which
the disc was recorded.
2. Select “On” using the v / V buttons.
Other – To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 23. If you enter the
wrong language code, press CLEAR.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b / B
buttons to highlight Enter.
Off (for Disc Subtitle) – Turn off Subtitle.
5. Pressing ENTER will set the player to Progressive
scan mode.
DISPLAY
TV Output Select
Set the playerʼs TV Output Select options according to
the TV connection type.
S-VIDEO – When your TV is connected with the
S-VIDEO jack.
YPbPr – When your TV is connected with the
COMPONENT / PROGRESSIVE SCAN jacks on
the DVD player.
TV Aspect
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DRC (Dynamic Range Control)
AUDIO
With the DVD format, you can hear a programʼs
soundtrack in the most accurate and realistic
presentation. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound.
Each DVD disc has a variety of audio output options.
Set the playerʼs AUDIO options according to the type
of audio system you use.
Set DRC to On for this effect.
Vocal
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
Dolby Digital / DTS / MPEG
Bitstream – Select “Bitstream” if you connect this
unitʼs DIGITAL OUT jack to an amplifier or other
equipment with a Dolby Digital, DTS or MPEG
decoder.
PCM (for Dolby Digital / MPEG) – Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital, MPEG will be
automatically downmixed to two-channel PCM
audio.
Off (for DTS) – If you select “Off”, the DTS signal
is not output through the DIGITAL OUT jack.
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any
96 kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz.
Check the documentation for your amplifier to verify
its capabilities.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX(R) VOD
OTHERS
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based on the DivX® VOD service. For more
1. Select “DivX(R) VOD” option and then press B.
2. Press ENTER while “Select” is selected and the
registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
download the video onto a disc for playback on
this unit.
3. Press ENTER to exit.
Note:
PBC
Set Playback Control (PBC) to On or Off.
All the downloaded videos from DivX® VOD can only
On: Video CDs with PBC are played according to
be played back on this unit.
the PBC.
Off: Video CDs with PBC are played in the same
way as Audio CDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures.
Set your preference and monitorʼs ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
General Features
Discs
ALL
Buttons
Operations
OPEN/CLOSE (Z)
Opens or closes the disc tray.
PAUSE/STEP (X)
During playback, press PAUSE/STEP (X) to pause
ALL
DVD
ALL
playback.
Press PAUSE/STEP (X) repeatedly to play Frame-by-
VCD
DivX
Frame.
SKIP (. / >)
SCAN (m / M)
During playback, press SKIP (. or >) to go to the
next chapter/track or to return to the beginning of the
current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
During playback, press SCAN (m or M) repeatedly to
DVD
ACD
VCD
MP3
DivX
WMA
select the required scan speed.
DVD, DivX disc; 4 steps
Video CD, MP3/WMA, Audio CD ; 3 steps
While the playback is paused, press SCAN (M)
DVD
VCD
DivX
repeatedly to play in slow motion (4 steps).
(forward only)
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
ALL
DVD Video discs: Chapter/Title/Off
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
A-B
Press the A-B button one at a time to select a point A and
point B and repeats a sequence from point A (Starting
point) to point B (End point). Press A-B again to cancel.
DVD
DivX
VCD
VCD
ACD
DivX
ZOOM
During playback or pause mode, press ZOOM to enlarge
DVD
the video image (3 steps).
You can move through the zoomed picture using
b / B / v / V buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback or in stop mode, press RANDOM for
ACD
VCD
MP3
WMA
random playback.
If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appears.
DVD
DVD MENU
The disc menu appears on the screen.
DVD
DVD
ANGLE (
)
During playback of DVD disc that contains scenes
recorded at different camera angles, press ANGLE (
repeatedly to select a desired angle.
)
DVD
DVD
DivX
DivX
SUBTITLE (
AUDIO (
)
During playback, press SUBTITLE (
select a desired subtitle language.
) repeatedly to
)
During playback, press AUDIO (
) repeatedly to hear
VCD
a different audio language, audio channel or encording
method.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
VCD 1.1
ACD
Notes on general features:
Last Scene Memory
• On a Video CD with PBC, you must set PBC to Off
on the setup menu to use the repeat function (See
“PBC” on page 14).
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
• If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
• Zoom may not work on some DVDs.
Note:
• When you are playing a DVD disc that contains
scenes recorded at different camera angles, the
angle indicator will be displayed on the TV screen
during the operations as an indication that angle
switching is possible.
This player does not memorize the scene of a disc if
you switch off the player before commencing to play
the disc.
Screen Saver / Auto Power Off
• The A-B repeat function is available only in the
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes. If the
Screen Saver is displayed for five minutes, the DVD
Player automatically turns itself off.
current track of the Audio CD.
Additional Features
DVD
VCD
DivX
Time Search
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm.
Playback starts from the selected time.
DVD
VCD
DivX
Marker Search
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 9 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene. Or, Press CLEAR and the marker number is
erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ID3 TAG
Playing an Audio CD or
MP3/WMA file
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. [ Song, Artist, Album, Comment, Genre ]
This unit can play Audio CDs or MP3/WMA files.
Tips:
MP3/ WMA/ Audio CD
• Press DVD MENU to move to the next page.
Once you insert an MP3/WMA files recorded media or
Audio CD, a menu appears on the TV screen.
Use v / V to select a track/file and then press
PLAY (N) or ENTER and playback starts.
You can use variable playback functions.
Refer to page 15-16.
• On a DISC with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on top of the menu is highlighted.
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
64 - 192 kbps (WMA)
• The player cannot read an MP3/WMA file that has
a file extension as non than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files.
We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of files in a disc should be less
than 1000 files.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Programmed Tracks
Programmed Playback
Press REPEAT to select a desired repeat mode.
• Track: Repeats the current track.
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
• All: Repeats all the tracks on programmed list.
• Off(No display): Does not play repeatedly.
1. Insert an Audio CD or MP3/WMA files recorded
media. AUDIO CD or MUSIC menu appears.
Note:
If you press SKIP (>) once during Repeat Track
E
2. Press PROGRAM and the
mark will appear.
playback, the repeat playback cancels.
Note:
Press PROGRAM again to exit the program edit
Erasing a Track from Program List
E
mode, then the
mark will disappear.
E
1. During stop mode, press PROGRAM and the
3. Select a track on the “List” and then press ENTER
to place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
mark will appear
2. Use b / B / v / V to select the track that you wish
to erase from the Program list.
4. Use b / B / v / V to select the track you want to
3. Press CLEAR. Repeat step 1-3 to erase additional
start playing on the “Program” list.
tracks on the list.
5. Press PLAY (N) or ENTER to start.
Playback begins in the order in which you
programmed the tracks. Playback stops after all of
the tracks on the “Program” list have played once.
Erasing the Complete Program List
E
1. During stop mode, press PROGRAM and the
6. To resume normal playback from programmed
playback, select a track on the list and then press
PLAY (N).
mark will appear
2. Use b / B / v / V to select “Clear All” and then
press ENTER.
Note:
The programs are also cleared when the power is
off or the disc is removed.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving to another file
Press SKIP (. or >) or cursor (b or B) once
during viewing a picture to advance to the next or
previous file.
Viewing a JPEG file
This unit can play JPEG files.
1. Insert a JPEG files recording media.
The PHOTO menu appears on the TV screen.
Zoom
During watching pictures, press ZOOM to enlarge the
video image (3 steps). You can move through the
zoomed picture using b / B / v / V buttons.
Rotating the picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
Listening to MP3 music while watching picture
2. Press v / V to select a folder, and press ENTER.
1. Insert the disc containing the two types of file in
A list of files in the folder appears.
the player.
3. If you want to view a particular file, press v / V to
2. Press TITLE to display the PHOTO menu.
highlight a file and press ENTER or PLAY (N).
3. Press v / V to select a photo file.
4. To return to the PHOTO menu while watching
4. Use B to select
icon then press ENTER.
pictures, press STOP (x).
Playback starts.
Tips:
5. To return to the PHOTO menu while watching
• If you are in a file list and want to return to the
pictures, press STOP (x).
previous Folder list, use v / V buttons to highlight
Tip:
and press ENTER.
To listen to only the desired music while watching
picture, program the desired files from the “MUSIC”
menu and then proceed as above.
• Press DVD MENU to move to the next page.
• There are three Slide Speed options:
>>> (Fast), >> (Normal) and > (Slow).
Use b / B / v / V to highlight
. Then, use b / B
to select the option you want to use.
JPEG disc compatibility with this player is
limited as follows:
• On a DISC with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on top of the menu is highlighted.
• Depending upon the size and the number of
JPEG files, it could take a long time for the DVD
player to read the discʼs contents. If you do not
see an on-screen display after several minutes,
some of the files may be too large — reduce the
resolution of the JPEG files to less than 5 million
pixels and burn another disc.
• While watching a picture, press RETURN (O) to
hide the help menu.
Slide Show
• The total number of files in a disc should be less
Use b / B / v / V to highlight the
(Slide Show)
than 1000 files.
then press ENTER.
• Some discs may be incompatible due to a
different recording format or the condition of disc.
Still Picture
• Ensure that all the selected files have the “.jpg”
1. Press PAUSE/STEP (X) during slide show.
extensions when copying into the CD layout.
The player will now go into pause mode.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
2. To return to the slide show, press PLAY (N) or
press PAUSE/STEP (X) again.
• File names without “.jpg” extension will not be
able to be read by this unit. Even though the files
are shown as JPEG image files in Windows
Explorer.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DivX Movie file
DivX disc compatibility with this player is limited
as follows:
Using this DVD Player you can play DivX file.
1. Insert a DivX file recording media.
• Available resolution size of the DivX file is under
The MOVIE menu appears on the TV screen.
720x576 (W x H) pixel.
• The file name of the DivX subtitle is available by
56 characters.
• If there is impossible code to express in the DivX
file, it may be displayed as “ _ ” mark on the
display.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
2. Press v / V to select a folder, and press
ENTER. A list of files in the folder appears.
• If the file is recorded with GMC, the unit
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY (N).
You can use variable playback functions.
Refer to page 15-16.
supports only 1-point of the record level.
GMC?
*
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX have this option.
4. Press STOP (x) to stop the playback.
The MOVIE menu appears.
Tips:
There are different levels of GMC encoding,
usually called 1-point, 2-point, or 3-point GMC.
• If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
Playable DivX file
.avi, .mpg, .mpeg
remote to highlight
and press ENTER.
• Press DVD MENU to move to the next page.
Playable Subtitle format
• On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on top of the menu is highlighted.
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
• The disc subtitle may not be displayed properly, if a
DivX subtitle is downloaded through the internet.
• If the Disc Subtitle setup menu does not have the
DivX subtitle language you are going to play, the
subtitle may not be displayed properly.
Playable Codec format
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP43”, “3IVX”,
“DIVX6.xx” (Standard Playback Only).
Notice for displaying the DivX subtitle
If the subtitle does not display properly, please follow
Playable Audio format
the steps below.
“Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”.
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
1. Press and hold SUBTITLE (
) for about
3 seconds. The language code will appear.
• Bit rate: within 8 - 320kbps (MP3),
32 - 384kbps (WMA)
2. Press b / B to select another language code until
the subtitle is displayed properly.
• Not all the WMA Audio format is compatible with
this unit.
3. Press ENTER.
Note:
The DivX subtitle file name has to be identified with
the DivX file name to display by this unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format Disc
This unit will play DVD-RW disc that is recorded
using the Video Recording (VR) format.
1. Insert a disc and close the tray.
It start playing automatically.
2. The DVD-VR menu appears on the TV screen
when you press DVD MENU buttons while playing.
3. Press v / V to select a track then press
PLAY (N) or ENTER and playback starts.
4. Press DVD MENU to move to the list menu.
Notes:
• The slow motion function is not available.
• This unit will play DVD-R/RW disc that is recorded
using the DVD-Video format that have been
finalized using a DVD-recorder. Unfinalized DVD-
R/RW discs cannot be played in this player.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. Player does not support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ʻcopy onceʼ
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Remote Control C1/C2/C3 Code Switching
This unit is initially set to C3 code (JVC DVD
PLAYER code). You can easily change the
Remote Control code to C1 (JVC VCR code), C2
(JVC DVD RECORDER code) or C3 as shown
below.
Note:
Remote Control Function
If you change the batteries of the Remote Control with
C1 or C2 code, the remote control code is set to C3
automatically. In this case, you should reset the
remote control code described above.
Maintenance and Service
STANDBY/ON
x
Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
When shipping the unit
ENTER
1-3
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide spray
near the unit.
• Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished.
• Keep pressing ENTER down during step 1.
1. Press the number Key “1” for C1, “2” for C2 or
“3” for C3 to change the remote control code.
2. Press STANDBY/ON (1/\) to turn on the unit.
3. Press x on the unit for over 5 seconds while the
unit is turned on. The code currently set appears
on the front display panel.
4. Press ENTER on the remote control to change the
unit's code. The code currently set on the remote
control is displayed on the front display panel for
approximately 5 seconds, and is applied to the
unit.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Rhaeto-Romance 8277
Rumanian
Russian
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Danish
Sanskrit
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Possible Cause
Correction
Symptom
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
No power.
• No disc is inserted.
• Insert a disc. (Check the disc indicator
in the display window is lit.)
The power is on, but
the DVD player does
not work.
• The TV is not set to receive DVD
signal output.
• Select the appropriate video input
mode on the TV.
No picture.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
No sound.
• The power of the equipment
connected with the audio cable is
turned off.
• Turn on the equipment connected with
the audio cable.
• The AUDIO options are set to the
wrong position.
• Set the AUDIO option to the correct
position, then turn on the DVD player
again by pressing STANDBY/ON.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type and regional code.)
The DVD player does
not start playback.
• The remote control is not pointed at
the remote sensor on the DVD player.
• Point the remote control at the remote
sensor of the DVD player.
The remote control
does not work properly.
• The remote control is too far from the
DVD player.
• Operate the remote control closer to
the DVD player.
• The current remote control code does
not match the unit.
• Identify the remote control code with
the code of unit. (See page 22).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements:
Power consumption:
Dimensions (Approx.):
Net weight (Approx.):
Operating temperature:
Operating humidity:
AC 110-240 V, 50/60 Hz
8 W
430 x 35 x 201 mm (17 x 1.4 x 7.9 inches) (W x H x D) without foot
1.6 kg (3.5 lbs)
5 °C to 35 °C (41 °F to 95 °F)
5 % to 90 %
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
S-VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
AUDIO OUT:
DIGITAL OUT (COAXIAL):
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
0.5 V (p-p), 75 Ω, RCA jack x 1
System
Laser:
Semiconductor laser, wavelength 650 nm
NTSC
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal system:
Frequency response:
Signal-to-noise ratio:
Harmonic distortion:
Dynamic range:
More than 90 dB (ANALOG OUT connectors only)
Less than 0.02%
More than 95 dB (DVD/CD)
Accessories
Video cable (1), Audio cable (1), Remote control (1), Batteries (2)
Note: Design and specifications are subject to change without prior notice.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
26
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Indonesia
0407MNH-0T-0T
UM
P/N: MFL38257053
Download from Www.Somanuals.com. All Manuals Search And Download.
|