DVD AUDIO/VIDEO PLAYER
Introduction
2
XV-FA900BK/XV-FA902SL
Getting started
6
Basic operations
Advanced operations
MP3 disc playback
JPEG disc playback
14
29
51
55
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
TV
DVD
SELECT
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL-
VOL+
ENTER
OPEN/CLOSE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
0
CH
-
PLAY
PREVIOUS
CLEAR
NEXT
STANDBY/ON
STANDBY/ON
3
SELECT
STROBE
STOP PAUSE
SLOW
-
SLOW+
VFP
7
8
7
-
DISC
4
¢
SKIP
REPEAT SUB TITLE AUDIO
PLAY
&
EXCHANGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
DVD AUDIO PROGRESSIVE
RM-SXV016J
REMOTE CONTROL
Changing the initial settings 60
Additional information
73
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located on the rear, bottom or
side of the cabinet. Retain this information
for future reference.
Model No.
Serial No
LET0220-001A
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Table of Contents
To repeat a desired part [A-B repeat playback]...................38
Changing the language, sound and scene angle.......... 39
Introduction
Page 2
To select the subtitle language [SUB TITLE] .......................39
To change the audio language or sound [AUDIO]..............40
To select a scene angle of DVD VIDEO [ANGLE].................41
Special picture playback and picture/sound effect...... 42
To display continuous still pictures [STROBE]....................42
To zoom in/out pictures [ZOOM] ..........................................43
To adjust the picture character [VFP]...................................43
To simulate surround sound [3D PHONIC]..........................44
Checking the sampling frequency and bit rate............. 45
Supplied accessories..........................................................2
Notes on handling..............................................................3
Important cautions...................................................................3
Safety precautions ...................................................................3
About discs .........................................................................4
Playable disc types...................................................................4
Non-playable discs...................................................................4
Audio formats...........................................................................4
Disc structure............................................................................5
Video CDs and SVCDs with Playback Control function ........5
Care and handling of discs......................................................5
Menu bar functions ......................................................... 46
To bring up the menu bar .....................................................46
Basic operation procedure....................................................46
Menu bar functions for DVD AUDIO ....................................47
Menu bar functions for DVD VIDEO .....................................48
Menu bar functions for SVCD/Video CD/Audio CD .............49
Getting started
Page 6
Connections........................................................................6
Before making any connections .............................................6
To connect to a TV ...................................................................6
To connect to a stereo audio amplifier/receiver....................9
To connect to an amplifier/receiver equipped with
MP3 disc playback
Page 51
About MP3 disc................................................................ 51
Operations........................................................................ 51
5.1-channel inputs.................................................................9
To connect to a digital audio device.....................................10
To connect the power cord ...................................................11
Using the remote control unit.........................................12
Basic operations.....................................................................51
Selecting the desired Group and Track................................52
Direct selection.......................................................................53
Repeat playback.....................................................................53
Checking the sampling frequency and bit rate....................54
To install batteries in the remote control unit .....................12
Remote sensor .......................................................................12
To use the remote control unit for TV operation.................13
To control the volume of a JVC’s amplifier or receiver......13
JPEG disc playback
Page 55
About JPEG disc.............................................................. 55
Basic operations .............................................................. 56
Basic operations
Page 14
To see a desired picture ........................................................56
To zoom in/out the picture [ZOOM] .....................................57
To see pictures continuously [slide show mode]......... 57
Before operation...............................................................14
Turning on/off the unit...........................................................14
The initial setup before using the unit .................................15
Basic playback ..................................................................17
To play back pictures from the beginning of the disc.........57
Selecting the start point of the slide show ..........................58
Repeat function......................................................................59
Inserting and removing discs................................................17
To start playback....................................................................19
To stop playback completely ................................................20
To stop playback temporarily ...............................................20
To change discs during playback [EXCHANGE]..................20
To move back the playback position while DVD VIDEO
Changing the initial settings
Page 60
Selecting preferences...................................................... 60
About the Preference display................................................60
How to set preferences..........................................................60
LANGUAGE page...................................................................61
PICTURE page ........................................................................63
AUDIO page............................................................................64
SPK.SETTING page................................................................66
OTHERS page.........................................................................67
Making fine tuning for your speakers............................ 68
To set the speaker sizes.........................................................68
To set the delay time .............................................................68
To set the speaker level.........................................................69
Limiting playback by children ........................................ 70
playback [One touch replay function] ...............................21
Resuming playback..........................................................22
To memorize the interrupted position .................................22
To resume playback...............................................................23
To locate the beginning of the scene or song ...............24
To locate a desired selection using 4 or ¢...................24
To locate a desired selection using the numeric buttons...25
Variable speed playback..................................................26
To advance or reverse playback rapidly while monitoring......26
To advance a still picture frame-by-frame...........................26
To play back in slow-motion.................................................26
Other convenient functions.............................................27
To set Parental Lock for the first time [PARENTAL LOCK] ...... 70
To change the settings [PARENTAL LOCK] .........................71
To temporarily release the Parental Lock
To check the playback status ................................................27
To change the brightness of the display window ...............28
[PARENTAL LOCK]..............................................................72
Advanced operations
Page 29
Additional information
Page 73
Playing from a specific position on a disc......................30
Names of parts and controls.......................................... 73
To locate a desired scene from the DVD menu...................30
To locate a desired scene from the menu of the
Front panel .............................................................................73
Display window......................................................................73
Rear panel...............................................................................73
Remote control unit...............................................................74
AV COMPU LINK remote control system...................... 75
Connection and setup............................................................75
Operation................................................................................75
Troubleshooting .............................................................. 76
Frequently Asked Questions .......................................... 78
Specifications................................................................... 79
Appendix A: Country/Area code list for Parental Lock ..... 80
Appendix B: Glossary...................................................... 81
Appendix C: Index............................................................ 83
SVCD/Video CD with PBC...................................................30
To specify a desired title/group ............................................31
To locate a desired position in the current title, group or
track [Time search] .............................................................31
To locate a desired scene from the display [DIGEST].........32
To select a still picture on a DVD AUDIO disc [PAGE] ........33
To play back a bonus group of a DVD AUDIO disc .............34
Changing the playback order ..........................................35
To play back in the desired order [Program playback].......35
To play back in random order [Random playback].............36
Repeat playback ...............................................................37
To repeat the current selection or all tracks
[Repeat playback]................................................................37
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Supplied accessories
• Audio/video cable (Yellow/White/Red) (x 1)
• R6P(SUM-3)/AA(15F) battery (x 2)
• AC power cord (x 1)
• Component video cable (Red/Green/Blue) (x 1)
• Audio cable (White/Red) (x 2)
• Remote Control Unit (x 1)
O
P
L
E
C
O
M
/
S
E
D
I
S
L
S
E
T
V
C
1
E
1
C
T
T
4 T
V
V
4
S
T
TV
A
N
T
T
V
D
B
V
D
V
7
7
2
2
Y
/
D
O
N
10T
-
V
T
V
D
V
D
/-
5
-
A
N
G
L
T
T
V
V
8
E
8
3
3
T
T
V
V
T P
O
P
0
M
0
6
E
A
N
U
G
E
V
O
T
V
L
C
+
9
9
H
T
I
R
O
G
+1M0U
T
T
L
E
P
U
/
I
N
G
C
H
T
V
C
A
O
E
/
V
I
C
NTE
ID
N
C
E
E
L
P
R
E
V
E
O
C
R
M
I
H
O
E
C
L
U
S
N
E
R
U
V
O
L
+
S
L
O
W
S
E
L
R
E
P
E
E
C
NO
N
E
X
T
T
S
C
R
E
E
N
A
T
D
I
S
S
T
G
E
S
T
U
B
R
B
E
T
IT
LE
P
3
D
H
A
N
G
L
S
L
O
N
A
U
O
W
+
IC
D
E
I
O
fs
/R
a
te
V
F
P
P
Z
R
S
O
O
O
M
G
R
E
C
S
S
IV
A
A
N
R
M
P
E
R
M
-S
O
T
V
C
E
M
L
X
E
V
0
1
N
T
C
O
6
R
J
O
L
• AV compulink cable (x 1)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
English
Notes on handling
Important cautions
Safety precautions
Installation of the unit
Avoid moisture, water and dust
• Select a place which is level, dry and neither too hot
nor too cold (between 5oC and 35oC, 41oF and 95oF).
• Leave sufficient distance between the unit and the TV.
• Do not use the unit in a place subject to vibrations.
Do not place the unit in moist or dusty places.
Avoid high temperatures
Do not expose the unit to direct sunlight or place it
nearby a heating device.
Power cord
When you are away
• Do not handle the power cord with wet hands!
• A small amount of power (2.7 W) is always consumed
while the power cord is connected to the wall outlet.
• When unplugging the unit from the wall outlet, always
pull the plug, not the power cord.
When you are away on travel or otherwise for an
extended period of time, remove the plug from the wall
outlet.
Do not insert foreign objects into the unit
Do not insert wires, hairpins, coins, etc. into the unit.
To prevent malfunction of the unit
Do not block the vents
Blocking the vents may damage the unit.
• There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
• Do not insert any metallic object into the unit.
• Do not use any non-standard shape disc available on
the market, because it may damage the unit.
• Do not use a disc with tape, seals, or paste on it,
because damage to the unit may result.
Care of the cabinet
When cleaning the unit, use a soft cloth and follow the
relevant instructions on the use of chemically-coated
cloths. Do not use benzene, thinner or other organic
solvents and disinfectants. These may cause
deformation or discoloring.
Note about copyright laws
If water gets inside the unit
• Please check the copyright laws in your country before
recording from DVD AUDIO, DVD VIDEO, SVCD, Video
CD, Audio CD, MP3 and JPEG discs. Recording of
copyrighted material may infringe copyright laws.
Turn off the power and remove the plug from the wall
outlet, then call the store where you made your
purchase. Using the unit in this state may cause a fire or
electrical shock.
Note about the copyguard system
• The DVD VIDEO disc is protected by the copyguard
system. When you connect the unit to your VCR (or
integrated TV/Video system), the copyguard system
activates and the picture may not be played back
correctly.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby,” “MLP Lossless” and the double-D symbol are
trademarks of Dolby Laboratories.
Confidential unpublished works.
Copyright 1992-1998 Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380,
5,978,762, and other world-wide patents issued and pending. “DTS ” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All Rights Reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About discs
Playable disc types
Playable disc types are as follows:
Audio formats
There are some audio formats recorded on discs as
shown below.
DVD AUDIO
DVD VIDEO
SVCD
•
Linear PCM
Uncompressed digital audio, the same format used on
CDs and most studio masters.
DVD AUDIO supports up to six channels at sample
rates of 48/96/192 kHz (also 44.1/88.2/176.4 kHz) and
sample sizes of 16/20/24 bits.
DVD VIDEO supports two channels at sampling rates
of 48/96 kHz and quantization of 16/20/24 bits.
Audio CD/Video CD is limited to two channels,
44.1 kHz at 16 bits.
A U D I O
V I D E O
Video CD
Audio CD
The DVD Logo is a trademark.
• CD-R and CD-RW discs recorded with the SVCD, Video
CD, Audio CD, MP3 or JPEG format can be played back,
though some may not be played back because of the
disc characteristics or recording conditions.
Note that unfinalized discs cannot be played back.
• DVD-R discs recorded with the DVD VIDEO format can
be played back, though some may not be played back
because of the disc characteristics or recording
conditions.
Note that unfinalized disc cannot be played back.
• DVD VIDEO players and DVD VIDEO discs have their
own Region Code numbers. This unit can play back
only DVD VIDEO discs whose Region Code numbers
include “1.”
•
Dolby Digital
A surround audio format configured with six
channels. Because the “LFE (Low-Frequency Effect for
sub-woofer, etc.)” channel, one of the six channels, is
an auxiliary channel, this format is called “5.1-channel
system.”
Not all Dolby Digital discs contain six (5.1) channel
information.
•
•
DTS (Digital Theater Systems)
A surround audio format configured with six (5.1)
channels, which is the same as Dolby Digital. Because
the compression ratio is lower than Dolby Digital, it
provides wider dynamic range and better separation.
Not all DTS discs contain six (5.1) channel
information.
Examples of playable DVD VIDEO discs:
1 2
3 4
1 2 3
4 5 6
ALL
1 5
1
This unit accommodates the NTSC system, also can play
back discs recorded with PAL system whose Region
Code numbers include “1.”
Note that the PAL video signal on disc is converted to an
NTSC signal and output.
MLP (Meridian Lossless Packing)
A format for DVD AUDIO with the compression ratio
of about 2:1 while allowing the PCM signal to be
completely recreated by the MLP decoder (required in
all DVD AUDIO players). It supports up to 192kHz/24-
bit.
Non-playable discs
The associated indicator lights up in the display window
when playing back a disc.
Non-playable disc types are as follows:
DVD-ROM, DVD-RAM, DVD-RW, DVD+RW, CD-ROM,
PHOTO CD, CD-EXTRA, CD-G, CD-TEXT, SACD,
MIX-MODE CD
Indicator*
Audio format
LPCM
Linear PCM
• Playing back discs listed as “Non-playable discs”
above may generate noise and damage speakers.
• This unit can play back audio signals recorded in CD-G,
CD-EXTRA, CD-TEXT and MIX-MODE CD discs.
DOLBY DIGITAL
DTS
Dolby Digital
DTS (Digital Theater Systems)
* When playing back a DVD AUDIO disc recorded by
MLP (Meridian Lossless Packing; a lossless audio
compression system that can completely recreate the
PCM signal), no indicator lights up in the display
window.
Note that, with some formats and/or depending on the
unit’s “DIGITAL AUDIO OUTPUT” setting, digital audio
signals are not always output from the unit’s DIGITAL
OUT jacks as are recorded on the disc.
See “DIGITAL AUDIO OUTPUT” on page 64 for details.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
English
Disc structure
Press
RETURN.
Press
RETURN.
Press
RETURN.
(For DVD AUDIO)
Moving
A DVD AUDIO disc is comprised of “groups,” and each
group is comprised of “tracks.” Some DVD AUDIO discs
also contain a “bonus group” that can be played back by
entering the “key number” (a kind of password). Usually
the contents of a “bonus group” are not opened to the
public. Note that most DVD AUDIO discs include other
information in addition to audio, such as still pictures,
movies and text.
1
picture
Moving
picture
Moving
picture
4
Menu
4
2
1 2
screen
Still
picture
1 2 3
Still
picture
4
4
Group 1
Group 2
Still
picture
Track 1
Track 2 Track 3 Track 4
Track 2 Track 3
Track 1
Care and handling of discs
(For DVD VIDEO)
How to handle discs
A DVD VIDEO disc is comprised of “titles” and each title
may be divided into some “chapters.” For example, if a
DVD VIDEO disc contains some movies, each movie may
have its own title number, and each movie may be
divided into some chapters. In a DVD VIDEO KARAOKE
disc, each song usually has its own title number and
does not have chapters.
When handling a disc, do not touch the surface of the
disc. Since discs are made of plastic, they are easily
damaged. If a disc gets dirty, dusty, scratched or warped,
the images and sound will not be picked up correctly,
and such a disc may cause the player to malfunction.
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
(For SVCD/Video CD/Audio CD)
An SVCD, Video CD or Audio CD is simply comprised of
Label side
Do not damage the label side, stick paper to or use any
adhesive on its surface.
“tracks.”
Track 1
Track 2
Track 3
Track 4
Storage
Make sure that discs are kept in their cases. If discs are
piled on top of one another without their protective
cases, they can be damaged. Do not put discs in a
location where they may be exposed to direct sunlight,
or in a place where the humidity or temperature is high.
Avoid leaving discs in your car!
Video CDs and SVCDs with Playback
Control function
What is Playback Control (PBC) function?
The Playback Control function, allows you to enjoy
menu-driven operation and high-resolution still images
which have a resolution four times greater than moving
pictures.
Maintenance of discs
If there are fingerprints or other dirt adhering to a disc,
wipe with a soft dry cloth, moving from the center
outwards.
If a disc is difficult to clean, wipe with a cloth moistened
with water. Never use record cleaners, petrol, alcohol or
any anti-static agents.
•
High-resolution still image display
You can display high-quality images four times
clearer than moving pictures.
•
Menu-driven playback
A selection menu is displayed when you start
playing an SVCD and Video CD disc with the
Playback Control feature. The selection menu
shows a list of numbers for selection. Some discs
may show moving pictures or a divided screen.
You can interact with the screen using a menu
display to select and play an entry.
See example illustration below about basic feature
of menu-driven playback (for details about PBC, see
also page 30).
CAUTION
Sometimes during play images may be garbled or
noisy. This is sometimes due to the disc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Connections
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a
VCR may cause a monitor problem when playing back a copy-protected disc. You may also have a monitor problem
when connecting the unit to an integrated TV/Video system.
TV
VCR
The unit
Connect directly
NOTES
• In the following description, “TV” may be substituted with “monitor” or “projector.”
• Terminal names used for other components may be different from those used in the following description.
To connect to a TV
Connection to a conventional TV
You can enjoy playback by simply connecting the unit to a TV.
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cable.
The unit
AUDIO OUT
CENTER SUBWOOFER
DIGITAL OUT
PCM / STREAM
VIDEO OUT
AV COMPU LINK
REAR
LEFT
VIDEO
RIGHT
COAXIAL OPTICAL
COMPONENT
FRONT
RIGHT LEFT
Y
PB
PR
S-VIDEO
TV
Red
Yellow
Yellow
White
Audio/video cable (supplied)
VIDEO
LEFT
AUDIO
White
RIGHT
Red
Connection to a TV equipped with an S-video jack
If your TV has an S-VIDEO input, you can get better picture quality by connecting it with the S-VIDEO output of the unit
using the S-video cable instead of connecting the video input of the TV to the VIDEO jack of the unit.
The unit
AUDIO OUT
CENTER SUBWOOFER
DIGITAL OUT
PCM / STREAM
VIDEO OUT
AV COMPU LINK
REAR
LEFT
VIDEO
RIGHT
COAXIAL OPTICAL
COMPONENT
PB
FRONT
RIGHT LEFT
Y
PR
S-VIDEO
TV
IN
S-VIDEO
Red White
VIDEO
LEFT
AUDIO
White
Red
S-video cable (not supplied)
Audio cable (supplied)
RIGHT
NOTES
• When the scanning mode is set to the Progressive mode, you cannot see any picture using these connections above. To see the
picture using the Progressive mode, see pages 7, 8.
• Set “ANALOG OUT” in the “AUDIO” preference display to “2-CH STEREO” (see page 65).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Connection to a TV equipped with component jacks
English
You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the video cables.
Blue
Component video cable (supplied)
The unit
Green
Red
AUDIO OUT
CENTER SUBWOOFER
DIGITAL OUT
PCM / STREAM
VIDEO OUT
AV COMPU LINK
REAR
VIDEO
LEFT
RIGHT
Blue
Red
COAXIAL OPTICAL
COMPONENT
FRONT
RIGHT LEFT
Y
PB
PR
Green
S-VIDEO
TV
IN
White
Red
Y
P
B
PR
S-VIDEO
VIDEO
White
Red
COMPONENT IN
Audio cable (supplied)
LEFT
AUDIO
RIGHT
• Connect “Y” to “Y, ” “PB” to “PB”(CB), “PR” to “PR”(CR) correctly.
The unit supports the Progressive scanning system as well as the conventional Interlaced scanning system.
If your television or monitor equipped with component jacks support the progressive video input, you can enjoy a high
quality picture by making the Progressive scanning mode active.
NOTES
• When the scanning mode is set to the Progressive mode, the PROGRESSIVE indicator on the front panel is lit. The color of the
indicator differs depending on the “PROGRESSIVE MODE” setting on the “PICTURE” preference display and the status of the
unit (see pages 8 and 63).
• When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the front panel is
not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, make
the Progressive scanning mode inactive by following the procedure described on page 8.
• When the component video input jacks on the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack
(optional).
• Set “ANALOG OUT” in the “AUDIO” preference display to “2-CH STEREO” (see page 65).
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio
output to monaural.
• To improve audio sound quality, connect the AUDIO OUT jacks to your separate audio equipment (see pages 9, 10).
• If your TV has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See “AV COMPU LINK remote control
system” on page 75 for details.
About SCANNING MODE
To display video on the television (monitor) screen, the conventional scanning method is called “Interlaced scanning.”
With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture
(frame); i.e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing
all the even-numbered lines.
On the other hand, the Progressive scanning system scans all horizontal lines at a time, so you can double the number
of pictures compared with the interlaced scanning, resulting in flicker-free, high-density picture.
To enjoy the progressive scanned video, a monitor (or TV or projector) to be connected to the unit must have the
Progressive inputs.
Depending on the material source format, DVD VIDEO discs can be classified into two types; film source and video
source (note that some DVD VIDEO discs contain both film source and video source). Film sources are recorded as 24-
frame-per-second information, while (NTSC) video sources are recorded as 30-frame-per-second (60-field-per-second
interlaced) information.
When the unit plays back a film source material, uninterlaced progressive output signals are created using the original
information. When a video source material is played back, the unit interleaves lines between the interlaced lines on
each to create the interpolated picture and outputs as the progressive signal.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To make the Progressive scanning mode selection active
The unit supports the Progressive scanning system as well as the conventional Interlaced scanning system. If your television
or monitor supports the progressive video input, you can enjoy a high quality picture by making the Progressive scanning
mode active.
OPEN/CLOSE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
0
PLAY
STANDBY/ON
STANDBY/ON
3
STOP PAUSE
7
8
7
-
DISC
4
¢
SKIP
PLAY
&
EXCHANGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
DVD AUDIO PROGRESSIVE
PROGRESSIVE indicator
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
VFP - PROGRESSIVE SCAN
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
Press and hold down VFP - PROGRESSIVE SCAN for a few seconds.
The scanning mode switches between the Progressive scanning and Interlaced scanning modes.
• When the scanning mode is set to the Progressive mode, the PROGRESSIVE indicator on the front panel is lit.
Depending on the “PROGRESSIVE MODE” setting on the “PICTURE” preference display and whether the current
DVD VIDEO disc is film-source or video-source, the color of the indicator differs, as shown in the table below
(see also pages 7 and 63).
Source type of DVD VIDEO
Setting of
Note
PROGRESSIVE MODE
Film Source
Video Source
VIDEO
FILM
Red
Red
While stopped in the Progressive scanning
mode, the PROGRESSIVE indicator is lit in red
regardless of the “PROGRESSIVE MODE”
selection.
Green
Green
Green
Red
AUTO
NOTES
• There are some progressive TV and High-Definition TV sets that are not fully compatible with the unit, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the Progressive scanning mode. In such a case, use the Interlaced
scanning mode. To check the compatibility of your TV set, contact your local JVC customer service center.
• All JVC progressive TV and High-Definition TV sets are fully compatible with the unit (Example : AV-61S902).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
English
To connect to a stereo audio amplifier/receiver
You can enjoy high-quality audio by connecting the unit’s audio output to your amplifier or receiver.
Connect the unit’s AUDIO OUT (FRONT LEFT/FRONT RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of
an audio amplifier or receiver.
The unit
AUDIO OUT
CENTER SUBWOOFER
DIGITAL OUT
PCM / STREAM
VIDEO OUT
AV COMPU LINK
REAR
LEFT
VIDEO
RIGHT
COAXIAL OPTICAL
COMPONENT
FRONT
RIGHT LEFT
Y
P
B
PR
S-VIDEO
Amplifier or receiver
Red
White
IN
White
Red
Audio cable (supplied)
LEFT
AUDIO
RIGHT
NOTES
• When using the unit with a stereo amplifier or receiver, set “ANALOG OUT” in the “AUDIO” preference display to “2-CH
STEREO” (see page 65).
• If your stereo amplifier or receiver has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See “AV
COMPU LINK remote control system” on page 75 for details
To connect to an amplifier/receiver equipped with 5.1-channel inputs
The unit supports the linear PCM multichannel format of DVD AUDIO and can feed multichannel audio output signals
from the six analog AUDIO OUT jacks.
It is also equipped with the DTS and Dolby digital decoders. So you can enjoy any type of the high quality surround
sounds by connecting the unit to an amplifier/receiver equipped with the 5.1-channel inputs.
Connect the unit’s analog AUDIO OUT jacks to the analog 5.1-channel inputs of an amplifier or receiver using the
supplied audio cables.
The unit
AUDIO OUT
CENTER SUBWOOFER
DIGITAL OUT
PCM / STREAM
VIDEO OUT
AV COMPU LINK
REAR
LEFT
VIDEO
RIGHT
COAXIAL OPTICAL
COMPONENT
FRONT
RIGHT LEFT
Y
PB
PR
S-VIDEO
Amplifier or receiver
AUDIO IN
FRONT
White
Audio/video
cable
(supplied)
LEFT
RIGHT
Yellow
Red
White
REAR
LEFT
RIGHT
Audio cable
(supplied)
Red
CENTER
White
SUBWOOFER
Audio cable
(supplied)
Red
• Be sure to connect correctly between corresponding terminals. The order of the 5.1-channel terminals depend on units.
NOTE
• When using the 5.1-channel outputs of the unit, set the “ANALOG OUT” in the “AUDIO” preference display to “MULTI
CHANNEL” (see page 65). If you select “EXPERT” in the “SPK.SETTING” preference display, you can control the audio output
balance of the speakers (see page 66).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To connect to a digital audio device
You can enhance the sound quality by connecting either of the unit’s DIGITAL OUT jacks to the digital input of an
amplifier, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc is directly
transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an
optional digital cable, you can enjoy high-quality surround sound.
For digital connection, connect the unit’s DIGITAL OUT (OPTICAL or COAXIAL) to the digital input of digital audio device
using an optical or a coaxial digital cable.
The OPTICAL jack is protected by the hinged cover.
To connect the optical cable to the jack, press the cover with the plug and connect it
to the jack inside in the correct direction.
The unit
AUOUT
CENTUBWOOFER
DIGITAL OUT
PCM / STREAM
VIDEO OUT
AV COMPU LINK
REAR
LEFT
VIDEO
RIGHT
COAXIAL OPTICAL
COMPONENT
FRONT
RIGHT LEFT
Y
P
B
PR
S-VIDEO
Coaxial digital cable (not supplied)
Optical digital cable (not supplied)
Audio cable (supplied)
Digital equipment
IN
IN
White
LEFT
OPTICAL
AUDIO
RIGHT
DIGITAL
COAXIAL
Red
Note that the DIGITAL OUT jacks on the unit have been designed and equipped exclusively for enjoying the digital
surround sound playback through the unit. It is not recommended to use the jacks for digital dubbing. When recording
the sounds (DVD AUDIO, DVD VIDEO, SVCD, Video CD, or Audio CD) played back on the unit, record them through the
analog jacks (in this case, set “ANALOG OUT” in the “AUDIO” preference display to “2-CH STEREO”) (see page 65).
NOTES
• When you connect the unit’s DIGITAL OUT to a digital audio device, before using, set “DIGITAL AUDIO OUTPUT” in the
“AUDIO” preference display correctly according to the connected audio device. If “DIGITAL AUDIO OUTPUT” is not set correctly,
loud noise may be generated from speakers, causing damage to them. See “DIGITAL AUDIO OUTPUT” on page 64.
• When you connect the unit’s DIGITAL OUT to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy
surround sound, the unit’s “D. RANGE COMPRESSION” setting in the “AUDIO” preference display is invalid. Make appropriate
surround audio settings on the decoder.
• If your digital audio device has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See “AV COMPU LINK
remote control system” on page 75 for details.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
English
To connect the power cord
When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the
unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The
STANDBY/ON indicator lights in red.
Note that the shape of the smaller plug of the AC power cord is not perfectly symmetrical as illustrated below.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other
accidents.
Caution
• Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other
accidents.
• To prevent any accidents or damage caused by an unsuitable AC power cord, only use the supplied power cord. If the
cord is damaged, contact a dealer and get another power cord.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Using the remote control unit
Using the remote control unit, you can operate not only all the functions of the unit but also basic functions of your TV
and amplifier/receiver.
To install batteries in the remote
control unit
Remote sensor
• Operate the remote control unit while pointing it
toward the remote sensor on the unit.
• The remote control unit can be used within a range of
about 5 meters from the remote sensor. If you operate
the remote control unit from a diagonal position,
controllable distance may be shorter.
The battery compartment is located on the back of the
remote control unit.
1 Press down on the point shown by
the arrow at the top of the
compartment cover, and pull up
the cover to open the
Remote sensor
compartment.
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
2 Place the two supplied R6P (SUM-
3)/AA(15F) batteries in the remote
control unit according to the
polarity markings (“+” and “–”)
inside the compartment and on the
batteries.
STANDBY/ON
STANDBY/ON
7
-
DISC
PLAY
&
EXCHANGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
DVD AUDIO PROGRESSIVE
3 Place the cover over the
compartment, and press down
lightly.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
The batteries will last about six months with normal use.
If the functions of the remote control unit become erratic,
replace the batteries. See below for more information.
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL-
VOL+
ENTER
CH
-
Precautions for the safe use of batteries
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
Observe the following precautions for the safe use of
batteries. If they are used improperly their lives will be
shortened, they may burst or their contents may leak.
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
3D
PHONIC
AMP VOL
Precaution
• Remove the batteries from the remote control unit if
it is not going to be used for a long period of time.
NOTE
• If the remote sensor on the unit is exposed to the
• Remove dead batteries and dispose of them
properly.
sunshine or strong light, you may not be able to control
the unit from the remote control unit.
• Never leave dead batteries lying around, take them
apart, mix them with other refuse, or throw them
into an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of
different types, when replacing them.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
5 Release TV/VIDEO - CANCEL.
English
To use the remote control unit for TV
operation
6 Try to operate the TV by pressing
TV STANDBY/ON
.
If your TV turns on or off, you have successfully set
the control signal.
You can operate your TV from the remote control unit.
Setting the remote control signal for
operating your TV
The following buttons can be used for operating the
TV.
To use 5/∞(CH+, CH−), 2/3(VOL−, VOL+), TV/VIDEO -
CANCEL and numeric buttons for TV control, set the
TV - DVD switch to “TV.”
TV
DVD
TV - DVD switch
Numeric buttons
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV STANDBY/ON
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV
DVD
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
TV/VIDEO -
CANCEL
CH
+
VOL
-
VOL+
Turns the TV on or off.
ENTER
TV
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
Switches the TV input mode between TV
and VIDEO.
REPEAT SUB TITLE AUDIO
TV/VIDEO
CANCEL
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
Selects the TV channels directly.
* For some TVs, pressing “+10” functions
as the “100+,” while “10” functions as
the ENTER button if your TV requires
pressing the ENTER button after
selecting a channel number.
TV1
TV-/--
10
1
~
1 Set the TV - DVD switch to “TV.”
TV0
0
2 Hold down TV/VIDEO - CANCEL until step 4 is done.
3 Enter the manufacturer code of your TV listed below
MUTING
+10
Mutes the TV sound.
by using the numeric buttons (0 to 9).
Changes the TV channels.
Example for a JVC TV:
CH
+
To enter the manufacturer code “01”: Press “0” then
“1.”
CH
-
4 Press ENTER.
VOL-
VOL+
Adjusts the TV volume.
Manufacturer code list
Manufacturer No.
Manufacturer No.
NOTE
AIWA
36
MIVAR
29
• If there is more than one code listed for the
manufacturer code of your TV, try them one by one until
you succeed.
BEIJING
CCE
22
NEC
20
02
NOBLEX
NOKIA
22
CHANGHONG
DAEWOO
FERGUSON
FINLUX
FUNAI
34
31
17, 37
27
PANASONIC
PEONY
PHILCO
PHILIPS
RCA
04, 11
34, 38, 39
10, 17, 21
02
To control the volume of a JVC’s
amplifier or receiver
30
32
GRADIENTE
GRUNDIG
HITACHI
ITT
15, 20
19
05
You can control the volume of a JVC’s amplifier or
receiver by using the AMP VOL +/– buttons on the
remote control unit.
SAMSUNG
12, 33, 34,
35
10
SLOW
SLOW+
VFP
28
SANYO
SEARS
SHARP
SONY
13, 16
13
REPEAT SUB TITLE AUDIO
JINXING
JVC
38
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
01, 23,
24, 25
06
3D
PHONIC
AMP VOL
AMP VOL
07
+/–
RM-SXV016J
REMOTE CONTROL
KONKA
40
TCL
41
LG (GOLDSTAR) 18
THOMSON
TOSHIBA
ZENITH
26
MAGNAVOX
MITSUBISHI
02
03
08,14
09
Pressing the + button raises the audio volume of the
amplifier or receiver, while pressing the – button lowers
the volume.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
In the following description, we assume that the buttons on the remote control unit are mainly used, however, you may
use the corresponding buttons on the front panel if available.
NOTE
Make sure that the TV - DVD switch on the remote control unit is set to “DVD” when using the 5/∞/
TV
DVD
2/3and numeric buttons for controlling the unit.
Before operation
Turning on/off the unit
Press DVD STANDBY/ON
on the remote control unit or press STANDBY/ON
on the front panel.
When the unit turns on, the STANDBY/ON indicator on the front panel, which illuminates in red during standby, lights in
green and each DISC indicator (1 to 7) shows the current status of whether a disc is set or not in the corresponding disc
tray.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
DVD
STANDBY/ON
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
STANDBY/ON indicator
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EX
VOL-
VOL+
STANDBY/ON
STANDBY/ON
ENTER
STANDBY/ON
CH
-
PREVIOUS
CLEAR
NEXT
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
SELECT
STROBE
DVD AUDIO PROGRESSIVE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
• The first time you turn on the unit after connecting the power cord, the DISC 1 to 7 indicators are illuminated until the unit detects
that no disc is set in the corresponding disc tray. Once detecting the status, the unit memorizes it unless you unplug the power
cord, so the DISC 1 to 7 indicators show the status of corresponding disc trays correctly.
• You can turn on the unit by pressing the 3button. In this case, the behavior of the unit after pressing the 3button is the same as
pressing this button while the power is on.
• When any disc is on the disc tray, you can turn on the unit using the DISC 1 to 7 buttons corresponding to the loaded disc number.
The behavior of the unit after pressing these buttons is the same as pressing them while the power is on.
• You can turn on the unit by pressing the 0OPEN/CLOSE button on the front panel. In this case, the disc tray carousel opens.
The opening display shown right appears on the TV screen.
The following message may appear at the bottom of the opening display
depending on the condition.
• NOW READING:The unit is reading the disc information.
• REGION CODE ERROR!:
The region code of the DVD VIDEO disc does not
match the unit. The disc cannot be played back.
• OPEN:
• CLOSE:
• NO DISC:
• RESUME STOP:
The disc tray carousel is opening.
The disc tray carousel is closing.
No disc is loaded.
NOW READING
The resume mode is set to “DISC RESUME.”
Message area
NOTE
• Even if you press DVD STANDBY/ON
on the remote control unit or STANDBY/ON
on the front panel to turn off the unit,
the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called the
standby mode. In this state, the unit consumes a very small amount of power.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
The initial setup before using the unit
We recommend you to set the display language, TV monitor type, analog audio output and digital output before using
the unit, depending on circumstances, by following the procedure below.
See “Changing the initial settings” on and after page 60 for details about each setting item.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
ENTER
CH
+
VOL
-
VOL+
ENTER
5/∞
CH
-
CHOICE
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
1 Press and hold down CHOICE for a few
4 Use 5/∞to select a desired monitor type.
seconds to bring up the first page of the DVD
PLAYER SET UP display.
You can select the monitor type according to your TV.
• For the normal (conventional) TV, select “4:3 LB”
or “4:3 PS.”
The pull-down menu of the “ON SCREEN
LANGUAGE” is already open.
• For the wide-screen TV, select “16:9 AUTO” or
“16:9 NORMAL.”
See page 63 for details about each mode.
DVD PLAYER SET UP
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
5 Press ENTER.
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
The third (final) page is shown, in which the pull-
down menu of the “ANALOG OUT” is already
open.
SPANISH
FRENCH
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ON SCREEN LANGUAGE selection
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG OUT
STREAM/PCM
DOLBY PROLOGC
2-CH DOLBY SURROUND
D. RANGE COMPRESSION
2 Use 5/∞to select a desired language.
2-CH STEREO
MULTI CHANNEL
You can select the on-screen language for the
preference displays, etc. from among English,
Spanish and French.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
3 Press ENTER.
ANALOG OUT selection
The second page is shown, in which the pull-down
6 Use 5/∞ to select a desired analog output
menu of the “MONITOR TYPE” is already open.
signal type.
DVD PLAYER SET UP
You must set this item correctly when you play back
a DVD VIDEO disc recorded with surround
multichannel audio.
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVER
MP3/JPEG
4:3 L.B.
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
• When connecting with a surround decoder, select
“2-CH DOLBY SURROUND.”
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
• When connecting with a stereo amplifier/receiver
or television set, select “2-CH STEREO.”
• When connecting the unit’s 5.1 channel audio
outputs to an amplifier equipped with 5.1-channel
input, select “MULTI CHANNEL.”
MONITOR TYPE selection
See page 65 for details.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
7 Press ENTER.
The pull-down menu of the “DIGITAL AUDIO
OUTPUT” appears.
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG OUT
DOLBY DIGITAL/PCM
PCM ONLY
DOLBY DIGITAL/PCM
D. RANGE COMPRESSION
STREAM/PCM
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
DIGITAL AUDIO OUTPUT selection
8 Use 5/∞to select a desired digital output
signal type.
You must set this item correctly when you connect
the unit to an external surround decoder or D/A
convertor (including an amplifier/receiver with
built-in surround decoder or D/A convertor).
(If you do not connect the unit to such a device, you
do not have to set this item.)
• When connecting with a Dolby Digital decoder,
select “DOLBY DIGITAL/PCM.”
• When connecting with a DTS or MPEG
Multichannel decoder, select “STREAM/PCM.”
• When connecting with other digital devices,
select “PCM ONLY.”
See page 64 for details.
9 Press ENTER.
The TV screen returns to show the opening display.
NOTES
• This setting may not be necessary except when turning
on the power after purchasing the unit.
• You can also set these items, as well as other
preferences, by pressing CHOICE briefly to bring up the
preference display. See “Changing the initial settings”
on and after page 60 for details.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
Basic playback
This section describes basic operations for playback of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs.
For MP3 and JPEG disc playback, see the separate chapter on and after pages 51 and 55.
TV
DVD
DISC SELECT
OPEN/CLOSE
STANDBY/ON
OPEN/
CLOSE
DISC
TV
DVD
SELECT
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
Numeric
buttons
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
DISC SKIP
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
DISC 1-7 buttons/indicators
0OPEN/CLOSE
CH
+
VOL
-
VOL+
ENTER
OPEN/CLOSE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
0
CH
-
PLAY
STANDBY/ON
STANDBY/ON
3
PREVIOUS
CLEAR
NEXT
STOP PAUSE
3
8
SELECT
STROBE
7
8
7
-
DISC
4
¢
SKIP
PLAY
&
EXCHANGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
7
SLOW-
SLOW+
VFP
DVD AUDIO PROGRESSIVE
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
3 7 8
Disc tray carousel
DVD AUDIO indicator EXCHANGE button/indicator
RM-SXV016J
REMOTE CONTROL
Inserting and removing discs
Up to 7 discs can be set on the disc tray carousel.
1 Press 0OPEN/CLOSE to open the disc tray carousel.
You can access to two of seven trays.
• From the second time, the carousel opens with the previously played disc on the front-left tray.
2 Press DISC SKIP to select accessible trays if required.
Each press of the button rotates the carousel clockwise by an amount for accessing the next two trays.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
3 Place one or two discs in the disc tray(s).
With the label side up
E
S
O
L
/C
N
E
P
O
0
Y
A
L
P
3
P
KI
DISC
S
GE
AN
I
H
EXC
7
SC
DI
6
SC
DI
ISC
5
D
4
SC
DI
3
SC
DI
2
ISC
D
C
1
IS
D
C
IS
GE
7 D
-
AN
CH
X
Y
&
E
LA
P
N
Y/O
DB
• To insert an 8-cm
disc, place it in the
inner recess.
N
4
STA
R
E
Y
LA
CD
P
N
I
/
D
/O
Y
B
C
/
V
D
N
A
D
C
T
S
V
R
E
P
U
/S
O
E
ID
V
D
V
/D
IO
D
U
A
D
V
D
4 Repeat steps 2 and 3 if you wish to set one or more discs to other disc trays.
5 Press 0OPEN/CLOSE to close the carousel.
The carousel closes and the DISC 1 to 7 indicators corresponding to the loaded disc numbers are turned on.
The disc set in the front-left tray when the carousel closes is loaded for playback. If no disc is set in the front-left tray
when the carousel closes, the unit rotates the carousel clockwise until it finds a disc for loading.
The unit reads the disc information and the opening display appears on the TV screen (see page 14).
When a DVD AUDIO disc is loaded, the DVD AUDIO indicator lights in blue.
If a menu is shown on the TV screen
When inserting a DVD AUDIO, DVD VIDEO, SVCD, or Video CD disc, a menu display may be automatically shown on
the TV screen (see pages 30, 31). From a menu, you can select a desired item to be played back by following the
procedure below.
(for DVD AUDIO/DVD VIDEO)
1 Use 5/∞/2/3to select a desired item.
2 Press ENTER.
The unit starts playback of the selected item.
(for SVCD/Video CD)
Use the numeric buttons to select a desired item.
The unit starts playback of the selected item.
NOTES
• Do not load a non-playable disc. For details about playable and non-playable disc types, see page 4.
• When loading a disc on the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
carousel is closed, or the disc may not be removed from the unit.
• Do not use any stabilizer when playing back a disc.
• With some DVD VIDEO discs, the unit starts playback automatically after inserting the disc.
• If you insert a DVD VIDEO disc whose region code does not match the unit, “REGION CODE ERROR!” is shown in the opening
display. For detail about the region code, see page 4.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To start playback
Available :
Press 3.
or
Press a desired DISC (1 to 7) button on the front panel, or press DISC SELECT followed by a desired
numeric (1 to 7) button on the remote control unit.
By the former operation (pressing 3), the unit starts playback from the disc loaded for playback after closing the
disc carousel (see page 17 for details about which disc is loaded for playback).
By the latter operation (using DISC 1 to 7, or DISC SELECT + numeric buttons), the unit starts playback from the disc
set in the specified tray. If no disc is set in the specified tray, the unit rotates the carousel clockwise until it finds a
disc for playback.
You can skip the disc which is just played back to a next one and the unit plays back the next disc. To skip the disc,
press DISC SKIP. If a disc is not set in the next tray, the unit searches an available disc until the tray takes around.
Regardless of operations for starting playback, the unit plays back all available discs sequentially until you stop
playback. However, the unit stops playback after the playback of the disc 7.
With some discs, which automatically goes to the menu screen and waits for the next instruction, the unit does not
move to the next disc.
About DISC 1 to 7 indicators
DISC 1 to 7 indicators show the current status of the corresponding disc tray as follows.
• Illuminates if a disc is set in the corresponding disc tray.
• Flashes when the corresponding disc is being played back.
• Unlit if no disc is set in the corresponding disc tray.
About screen saver function
• A television monitor screen may be burned out if a static
While the screen saver
function is not activated
While the screen saver
function is activated
picture is displayed for a long time. To prevent this, the unit
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu, is displayed
for over 5 minutes.
• Pressing any buttons on the unit or the remote control unit
will release the screen saver function and return to the
previous display.
• You can also turn off the screen saver function (see page 64).
• The screen saver function does not work for still images
during DVD AUDIO playback.
About On-screen guide icons
• When you make an operation, you may see the following icons displayed over the picture for about 3 seconds. These have the
following meanings.
You can set the unit not to display these icons below via the preference settings described on page 67.
Icon
Status
Appears at the beginning of playback mode.
Appears at the beginning of pause mode.
Appears at the beginning of fast forward/backward playback with the current speed (see page 26).
Appears at the beginning of slow-motion playback with the current speed (see page 26).
Appears at the beginning of a scene recorded from multiple angles (see page 41).
Appears at the beginning of a scene recorded with multiple audio languages (see page 40).
Appears at the beginning of a scene recorded with multiple subtitle languages (see page 39).
Appears when the unit does not accept your operation because of disc contents, structure, playback status etc.
Note that some operations are occasionally unacceptable even if
when ON SCREEN GUIDE in the preference display is set to OFF.)
is not displayed. (This icon appears even
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
NOTES
• Once a disc tray whose status is known by the unit becomes accessible when the carousel opens, the corresponding indicator
lights even if the disc is not set.
• When the RESUME function is “ON” or “DISC RESUME” and the resume point is memorized, pressing 3starts playback from
that point instead of the beginning. See page 23.
• During playback, the display window shows the title/chapter, group/track, or track number being played.
• During DVD VIDEO playback, pressing 3moves back the playback position 10 seconds before the current position. See page 21
for details.
• When a DVD disc is set in the front-left tray, the unit usually starts playback automatically after closing the carousel and reading
the disc contents.
To stop playback completely
Available :
Press
7
.
The unit stops playback.
• If you press 0OPEN/CLOSE during playback, the unit stops playback and opens the disc tray carousel.
To stop playback temporarily
Available :
Press 8.
The unit pauses playback. To resume playback, press 3.
To change discs during playback [EXCHANGE]
Available :
You can open the disc tray carousel during playback and change discs that are not being played back.
¶During playback (with the carousel closed)
In this condition, you can see the EXCHANGE indicator is illuminated in green.
1 Press EXCHANGE.
The carousel opens without interrupting playback.
“EXCHANGE” is briefly shown in the display window.
2 Set, remove or change discs in the accessible disc trays.
3 To access to the other trays, press DISC SKIP.
Each press of the button rotates the carousel, however, the disc tray corresponding to the disc being played back is
never accessible.
4 Press EXCHANGE or 0OPEN/CLOSE.
The carousel closes.
NOTES
• During the steps 2 and 3 above, only the 7, 8, 4/¢and 1/¡buttons are effective for the disc being played back.
• The EXCHANGE button does not work during program playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To move back the playback position while DVD VIDEO playback
[One touch replay function]
Available :
During playback of a DVD VIDEO disc, you can move back the playback position 10 seconds from the current position.
¶During DVD VIDEO playback
Press 3.
The playback position moves back 10 seconds before the current position.
Note that this function works only in the same title, though it works between chapters.
If you press 3within 10 seconds from the beginning of a title, playback starts from the beginning of the title.
NOTES
• This function works only with DVD VIDEO discs.
• When appears on the TV screen:
Some DVD VIDEO discs may not accept this function because of disc contents.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Resuming playback
The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later.
There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 67 for details
about how to set the resume mode.
• When purchasing the unit, the resume mode is initially set to “ON”.
• You can deactivate the resume mode by setting “RESUME” on the “OTHERS” preference display to “OFF”.
TV
DVD
0OPEN/CLOSE
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
OPEN/CLOSE
TV1
1
TV2
TV3
3
OPEN/CLOSE
2
TV5
5
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
0
PLAY
3
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
STANDBY/ON
STANDBY/ON
TV8
8
STOP PAUSE
TV0
0
MUTING
7
8
+10
7
-
DISC
4
¢
SKIP
TITLE/
GROUP
TV/VIDEO
CANCEL
PLAY
&
EXCHANGE
RETURN
PAGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
CH
+
DVD AUDIO PROGRESSIVE
VOL
-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
3
SELECT
STROBE
3 7
Disc tray carousel
7
SLOW-
SLOW+
.
To memorize the interrupted position
Available :
¶During playback
When the resume mode is set to “DISC RESUME”
Press 7.
The unit stops playback and memorizes the interrupted position. After pressing 7, the display window on the front
panel shows “----RESUME” (DVD AUDIO/DVD VIDEO) or “--RESUME” (SVCD/Video CD).
In this condition, a memory of the interrupted position is not cleared if you press 0OPEN/CLOSE to open the disc
tray carousel, or press DVD STANDBY/ON
turn off the unit.
on the remote control unit or STANDBY/ON
on the front panel to
• If you do not want the disc played to resume playback, press 7while stopped.
• It memorizes positions interruputed for the last 30 discs.
• If you interrupt playback of a disc which you resumed playback, the memory is updated to store the new interrupted position.
• When the unit has already memorized positions for 30 discs, memorizing one more position for a disc automatically erases the
oldest memory. On the other hand, if you interrupt playback of a disc which an interrupted position is already memorized, the order
of memorized discs may change. In result, when memorizing a new data, the order of memorized discs to be erased also may
change.
When the resume mode is set to “ON”
Press 7.
The unit stops playback and memorizes the interrupted position. After pressing 7, the display window on the front
panel shows “----RESUME” (DVD AUDIO/DVD VIDEO) or “--RESUME” (SVCD/Video CD).
In this condition, a memory of the interrupted position is not cleared until you press OPEN/CLOSE,
DVD STANDBY/ON
on the remote control unit or 0OPEN/CLOSE, STANDBY/ON
on the front panel.
• If you do not want the disc played to resume playback, press 7while stopped.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To resume playback
Available :
When the resume mode is set to “DISC RESUME”
¶While stopped, or no disc is inserted
1 Press 0OPEN/CLOSE to insert a disc whose interrupted position is
memorized.
After loading the disc, the display window on the front panel shows “----
RESUME” (DVD AUDIO/DVD VIDEO) or “--RESUME” (SVCD/Video CD) and
“RESUME STOP” appear at the bottom of the opening display.
If a disc for which you want to resume playback is already set in the disc tray
carousel, you need not to follow this step.
RESUME STOP
2 Press 3.
The display window shows “RESUME PLAY” and the unit resumes playback from the position you interrupted
playback.
The unit keeps the memory for the position on a disc where you interrupted playback, even though you remove the
disc from the disc tray carousel and set it back again.
Of course, the unit keeps the memory when the disc remains in the disc tray since the last playback.
•
To play back a disc from the beginning (instead of the interrupted position)
After loading the disc, press 7before pressing 3to start playback.
Pressing 7while the disc is stopped clears the memory for the interrupted position.
Every time you interrupt playback, the position is memorized as the “resuming” point.
When the resume mode is set to “ON”
¶While the disc you interrupted playback last time* is still on the disc tray (*by pressing 7).
Press 3.
The display window shows “RESUME PLAY” and the unit resumes playback from the position you interrupted
playback.
If you press 3then 7, the unit starts playback after the display window shows “RESUME PLAY.”
Note that you cannot resume playback if you interrupted playback last time by opening the carousel or turning off
the power.
•
To play back a disc from the beginning (instead of the interrupted position)
Carry out any of the followings:
* Press 7while stopped, then press 3.
* Turn off and on the unit by pressing DVD STANDBY/ON
on the remote control unit or STANDBY/ON
on the
front panel then press 3.
NOTES
• If you change the “RESUME” setting on the “OTHERS” preference display to “OFF” or “ON” from “DISC RESUME,” you cannot
resume playback of a disc whose “resuming” position is memorized. However, if you again set “RESUME” to “DISC RESUME,”
you can resume playback of the disc.
• If you open the carousel with the RESUME mode set to ON, the “resuming” point clears.
• The resume function cannot be performed with Audio CD, MP3 and JPEG discs.
• In the case of an SVCD/Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later
than the point you interrupt playback last time.
• The unit may not resume playback exactly from the interrupted point, depending on the point.
• For a double-sided DVD AUDIO/DVD VIDEO disc, the unit regards each side as a different disc. Therefore, when resuming
playback of such a disc, make sure to set the disc with the resumed side down.
• When the unit memorizes the interrupted point of a disc, it also memorizes Audio, Subtitle and Angle settings (regardless of
whether “RESUME” is set to “DISC RESUME” or “ON”).
• If you interrupt playback while the menu for a DVD AUDIO, DVD VIDEO, SVCD or Video CD is shown on the TV screen, the unit
may not memorize the interrupted position correctly, regardless of whether the “RESUME” mode is set to “ON” or “DISC
RESUME.”
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
To locate the beginning of the scene or song
You can locate the desired group or track (for DVD AUDIO), title or chapter (for DVD VIDEO), or track (for SVCD/Video CD/
Audio CD) from which the unit starts playback.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
Numeric
buttons
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
OPEN/CLOSE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
0
ENTER
PLAY
STANDBY/ON
STANDBY/ON
3
CH
-
STOP PAUSE
PREVIOUS
CLEAR
NEXT
7
8
7
-
DISC
4
¢
SKIP
PLAY
&
EXCHANGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
SELECT
STROBE
4/¢
SLOW
-
SLOW+
VFP
DVD AUDIO PROGRESSIVE
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
4/¢
RM-SXV016J
REMOTE CONTROL
To locate a desired selection using 4or ¢
Available :
¶For DVD AUDIO/Audio CD: During playback or while stopped
For DVD VIDEO:
During playback
For SVCD/Video CD:
During playback without PBC function
Press 4or ¢.
With a DVD AUDIO, pressing the button skips a group or track depending on the disc configuration. With a DVD
VIDEO, pressing the button skips a chapter or title depending on the disc configuration. With an SVCD, Video CD or
Audio CD, pressing the button skips a track.
The selection number appears in the display window on the front panel.
• To skip forward titles/chapters/groups/tracks, press ¢as many times as required.
• To skip to the beginning of the current titles/chapters/groups/tracks, press 4once.
• To skip back titles/chapters/groups/tracks, press 4as many times as required.
NOTES
• This function may not work with some DVD VIDEO discs.
• This function does not work during SVCD/Video CD playback with PBC function (see pages 5 and 30).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To locate a desired selection using the numeric buttons
Available :
.
¶For DVD AUDIO/DVD VIDEO/Audio CD: During playback or while stopped
For SVCD/Video CD: During playback without PBC function or while stopped
Use the numeric buttons to specify the number.
Depending on the disc type and the unit status, what is specified differs.
Unit status
Disc type
What is specified
1
DVD AUDIO
group or track*
2
While stopped
DVD VIDEO
title or chapter*
SVCD/Video CD/Audio CD
DVD AUDIO
track
track
During playback
DVD VIDEO
chapter
track
SVCD/ Video CD/Audio CD
1
2
*
*
Pressing the numeric buttons simply selects a track. To select a group (when a disc contains more than one group),
press TITLE/GROUP before pressing the numeric buttons.
Pressing the numeric buttons simply selects a chapter when a disc contains only one title, or selects a title when a
disc contains more than one title.
The selected title, group or track number appears in the display window on the front panel.
• To select a number between 1 and 10: Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13:
To select 34:
To select 40:
+10 → 3
+10 → +10 → +10 → 4
+10 → +10 → +10 → 10
The unit starts playback from the beginning of the selection. The selected title, chapter, group or track number
appears in the display window on the front panel.
NOTES
• You can also specify the desired title during DVD VIDEO playback. See page 31 for details.
• During DVD AUDIO/DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting
an item in the menu.
• When
appears on the TV screen:
The title, chapter, group or track you have selected is not contained in the disc.
• This function does not work during SVCD/Video CD playback with PBC function (see pages 5 and 30).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Variable speed playback
You can play back slowly or fast, or advance a picture frame by frame.
VOL
-
VOL+
ENTER
8
CH
-
4/¢
PREVIOUS
CLEAR
NEXT
OPEN/CLOSE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
0
PLAY
3
SELECT
STROBE
SLOW+
STANDBY/ON
STANDBY/ON
8
SLOW-
STOP PAUSE
7
8
7
-
DISC
4
¢
SKIP
REPEAT SUB TITLE AUDIO
VFP
PLAY
&
EXCHANGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
1/¡
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
DVD AUDIO PROGRESSIVE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
4/¢
To advance or reverse playback rapidly while monitoring
Available :
¶During playback
Method 1 (from the remote control unit only)
Press 1or ¡.
Each press of 1or ¡increases the playback speed. You can select the speed among x2, x5, x10, x20 and x60 the
normal speed.
Pressing 3returns the unit to normal playback.
Method 2
Hold down 4or ¢.
Holding down ¢advances playback rapidly, while holding down 4reverses playback rapidly at five times the
normal speed. Releasing the button returns the unit to normal playback.
NOTES
• During this operation, the sound is muted except when a DVD AUDIO and an Audio CD are played back. When playing back
them in this function, the sound will come out discontinuously.
• This function does not work for an MP3 or JPEG disc. If you try to use this function,
appears.
To advance a still picture frame-by-frame
Available :
¶ While paused (still)
Press 8.
Each time you press 8, the still picture advances to the next frame.
Pressing 3returns to normal playback.
To play back in slow-motion
Available :
You can play back the picture in slow-motion. The speed can be selected among x1/32, x1/16, x1/8, x1/4 and x1/2 the
normal speed.
¶During playback
Press 8, then use 1/¡.
To play forward slow-motion, press ¡, and to play reverse slow-motion (for DVD VIDEO discs only), press 1.
First, the unit plays the slowest speed, and each time you press the button, the playback speed increases.
Pressing 3returns to normal playback. Pressing 8pauses slow-motion playback.
NOTES
• The sound is muted during slow-motion playback.
• Reverse slow-motion playback is not possible for an SVCD and Video CD.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
Other convenient functions
You can check the playback status, as well as change the brightness of the display window.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
5/∞
VOL-
VOL+
ENTER
CH
-
ON SCREEN
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
3
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
3D
PHONIC
ANGLE
AMP VOL
RM-SXV016J
REMOTE CONTROL
To check the playback status
Available :
You can see the current selection number (the group/track number for DVD AUDIO, the title/chapter number for DVD
VIDEO or the track number for SVCD/Video CD/Audio CD), time information (the track, group or chapter time while
stopped, or the elapsed track, group or chapter time during playback) and the transport status (stop, playback, pause etc.)
on the TV screen.
¶During playback or while stopped
Press ON SCREEN.
The playback status bar appears on the TV screen.
(for DVD AUDIO)
Transfer rate
8.5Mbps
(for DVD VIDEO)
Current track Current transport
Current chapter Current transport
number
status
Transfer rate
number
status
DISC 1 GROUP 3 TRACK 33 TOTAL 1:25:58
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
Current title
elapsed time
Current disc number
Current group number
Current group elapsed time
Current disc number
Current title number
(for Video CD)
(for SVCD)
Current track
number
Current transport
status
Current transport
status
DISC 1 TRACK 33
TIME
25:58
DISC 1 TRACK 33
TIME
25:58
Disc elapsed time
Current disc number
Current track number
Current disc number
Disc elapsed time
(for Audio CD)
Current transport status
DISC 1 TRACK 33
TIME 25:58
Disc elapsed time
Current disc number
Current track number
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The indication on the right most of the status bar shows the unit’s transport status as follows:
Icon
Status
Appears in the playback mode.
Appears in the stop mode.
Appears in the pause mode.
Appears in the fast forward/backward playback mode.
Appears in the slow-motion playback mode.
Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access
various functions.
(Example of the menu bar for DVD VIDEO)
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
CHAP. 1/3 1/5 1/3
8.5Mbps
OFF
See page 46 for details about the menu bar.
NOTES
• To dismiss the status bar:
Press ON SCREEN until the status bar is dismissed.
• The status bar cannot be displayed during MP3/JPEG playback.
To change the brightness of the display window
You can dim the brightness of the display window.
Press 5or ∞while holding down ANGLE.
You can select the brightness of the display window from among four levels. Each time you press the button, the
brightness changes among low, middle, high, and off.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
This chapter describes operations for various advanced functions of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio
CD discs. For MP3 and JPEG disc playback, see the separate chapters on and after pages 51 and 55.
The following table shows the contents of this section together with effective disc types for each operation.
English
DVD
AUDIO
DVD
VIDEO
Super
VCD
Video
CD
Audio
CD
Function
Page
Playing from a specific position on a disc
To locate a desired scene from the DVD menu
yes
yes
30
30
31
31
To locate a desired scene from the menu of the SVCD/Video CD
with PBC
yes
yes
To specify a desired title/group
yes
yes
yes
yes
yes
To locate a desired position in the current title, group or track
[Time search]
yes
yes
yes
yes
yes
To locate a desired scene from the display [DIGEST]
To select a still picture on a DVD AUDIO disc [PAGE]
To play back a bonus group of a DVD AUDIO disc
Changing the playback order
32
33
34
yes
yes
To play back in the desired order [Program playback]
To play back in random order [Random playback]
Repeat playback
yes
yes
yes
yes
yes
yes
yes
yes
35
36
To repeat the current selection or all tracks [Repeat playback]
To repeat a desired part [A-B repeat playback]
Changing the language, sound and scene angle
To select the subtitle language [SUB TITLE]
To change the audio language or sound [AUDIO]
To select a scene angle of DVD VIDEO [ANGLE]
Special picture playback and picture/sound effect
To display continuous still pictures [STROBE]
To zoom in/out pictures [ZOOM]
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
37
38
yes*
yes
yes
yes
yes
yes
yes
39
40
41
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
42
43
43
44
45
yes*
yes*
To adjust the picture character [VFP]
To simulate surround sound [3D PHONIC]
Checking the sampling frequency and bit rate
yes
yes
yes
yes
* In the table above, “yes” shows that the corresponding function is effective to non-audio information (such as movies,
still pictures and text data) if recorded on a DVD AUDIO disc.
NOTE
Make sure that the TV - DVD switch on the remote control unit is set to “DVD” when using the 5/∞/2/3,
numeric and TV/VIDEO - CANCEL buttons for controlling the unit.
TV
DVD
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Use 5/∞/2/3to select a desired item, then
press ENTER.
Playing from a specific
position on a disc
The unit starts playback of the selected item.
You can play a disc from the selected track, title, group or
chapter, or from the specified time.
• With some discs, you can also select items by entering the
corresponding number using the numeric buttons, which
may cause the unit to automatically start playback.
To locate a desired scene from the DVD
menu
NOTES
• When
appears on the TV screen by pressing TOP
MENU or MENU in step 1:
The disc does not have an appropriate menu listing the
titles or groups.
Available :
• The MENU button does not work while stopped.
DVD AUDIO/DVD VIDEO discs generally have their own
menus which show the disc contents. These menus
contain various items such as titles of movies, names of
songs, or artist information, and display them on the TV
screen. You can locate a desired scene by using the DVD
menu.
To locate a desired scene from the menu
of the SVCD/Video CD with PBC
TV
DVD
Available :
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
Some SVCD/Video CD discs support the PBC function.
PBC is an abbreviation of “PlayBack Control.“ An SVCD/
Video CD disc recorded with PBC has its own menus,
such as a list of the songs of the disc. You can locate a
specific scene by using the PBC menu.
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
TOP
MENU
CH
+
MENU
VOL
-
VOL+
ENTER
5/∞/2/3
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
TV
DVD
SELECT
STROBE
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
SLOW
-
SLOW+
VFP
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
REPEAT SUB TITLE AUDIO
Numeric
buttons
4
TV7
7
6
TV9
9
fs/Rate PROGRESSIVE
SCAN
ZOOM
TV8
DIGEST ANGLE
8
TV-/--
10
TV0
0
MUTING
3D
PHONIC
+10
AMP VOL
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
RETURN
CH
+
VOL
-
VOL+
RM-SXV016J
REMOTE CONTROL
ENTER
TOP
MENU
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
3
¶Whenever a DVD AUDIO/DVD VIDEO disc is loaded
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
1 Press TOP MENU or MENU.
DIGEST ANGLE
3D
PHONIC
AMP VOL
The menu appears on the TV screen.
RM-SXV016J
REMOTE CONTROL
Example:
¶When an SVCD/Video CD disc with PBC is stopped
1 Press 3or TOP MENU.
A disc menu appears on the TV screen (the PBC
function is activated).
Example:
About DVD menu
Normally, a DVD AUDIO disc which contains more than one
group may have a “top” menu which lists the groups.
Similarly, a DVD VIDEO disc which contains more than one
title may have a “title” menu which lists the titles. In such a
case, the menu appears on the TV screen by pressing the TOP
MENU button. Some DVD AUDIO/DVD VIDEO discs may also
have a different menu which appears by pressing the MENU
button.
“PBC“ is indicated in the display window on the
front panel.
See the instructions of each DVD AUDIO/DVD VIDEO disc for its
particular menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Use the numeric buttons to select the desired
2 Use the numeric buttons to specify a title or
English
item.
group to be played.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
Examples:
To select 13: +10 → 3
To select 13: +10 → 3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
The unit starts playback from the specified title or
group.
The unit starts playback of the selected item.
You can return to the menu by pressing the
RETURN button.
NOTE
When something like “NEXT” or “PREVIOUS”
appears on the TV screen, the unit generally works
as follows:
• Some DVD AUDIO/DVD VIDEO discs may not accept
this function because of disc contents.
• Pressing ¢advances to the next page.
• Pressing 4returns to the previous page.
* The method of the operation is different
depending on the disc.
To locate a desired position in the
current title, group or track [Time
search]
• If you want to playback a PBC-compatible SVCD/Video CD
disc without activating the PBC function, start playback by
using the numeric buttons instead of 3(see page 25).
Available :
You can play a disc from the desired position by
specifying the elapsed time from the beginning of the
current group (for DVD AUDIO), the current title (for DVD
VIDEO) or the disc (for SVCD/Video CD/Audio CD) using
the time search function.
• To activate the PBC function when a PBC-compatible SVCD/
Video CD disc is being played back without the PBC
function, carry out any of the followings:
* Press TOP MENU or MENU.
* Press 7to stop playback, then press 3 .
Note that some DVD VIDEO discs do not contain time
information, and the time search function cannot be
used.
To specify a desired title/group
TV
DVD
STANDBY/ON
Available :
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
While playing back a DVD AUDIO/DVD VIDEO disc with
more than one title or one group, you can specify a
desired title or group to be played using the numeric
buttons.
TV4
TV6
Numeric
buttons
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
2/3
CH
+
VOL
-
VOL+
ENTER
TV
DVD
CH
-
ON SCREEN
STANDBY/ON
OPEN/
CLOSE
DISC
TV
DVD
SELECT
PREVIOUS
CLEAR
NEXT
ENTER
SELECT
STROBE
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
SLOW-
SLOW+
VFP
Numeric
buttons
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
REPEAT SUB TITLE AUDIO
TV0
0
MUTING
fs/Rate PROGRESSIVE
SCAN
ZOOM
+10
DIGEST ANGLE
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
TITLE/
GROUP
3D
PHONIC
AMP VOL
CH
+
VOL-
VOL+
ENTER
RM-SXV016J
REMOTE CONTROL
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
¶For DVD AUDIO/DVD VIDEO/Audio CD:
During playback or while stopped
¶For SVCD/Video CD:
In any condition except SVCD/Video CD
¶During playback
1 Press TITLE/GROUP.
“--” is shown in the title display area of the display
window.
playback with PBC
(Display window example for DVD VIDEO)
1 Press ON SCREEN twice.
The menu bar appears on the TV screen.
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
(See page 46 for details about the menu bar.)
PROGRAM
RANDOM
Title display area Current chapter number
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
When you correct a mistake
2 Use 2/3to move
to
, then press
Use 2repeatedly to move back to the digit where you
entered a undesired numeral (the leftmost “-” digit),
and reenter the correct time.
ENTER.
The pull-down menu for entering time appears
under the
.
(Example for changing “2:35:__” to “2:34:__.”)
(Screen example for DVD VIDEO)
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
CHAP. 1/3 1/5 1/3
8.5Mbps
TIME 2 : 3 5 : _ _
OFF
Press 2.
TIME _:__:__
TIME 2 : 3 _ : _ _
(Screen example for Audio CD)
Press “4”.
DISC 1 TRACK 33 TIME 25:58
OFF
PROG. RND.
TIME 2 : 3 4 : _ _
TIME __:__
4 Press ENTER.
The unit starts playback from the specified time.
3 Use the numeric buttons (0 to 10) to enter the
desired time.
NOTES
The specified time is displayed in the pull-down
menu.
• When a DVD AUDIO disc is stopped, you can specify the
elapsed time from the beginning of group 1.
• When
appears on the TV screen:
The time you have selected is not contained on the disc,
or the time search function does not work on the disc.
• “10” button works as “0” and “+10” button is not used with
this function.
Also note that the time search function does not work
during SVCD/Video CD playback with the PBC function.
• You can specify the time in hour/minute/second format for
DVD AUDIO/DVD VIDEO discs, and in minute/second
format for SVCD/Video CD and Audio CD discs.
• To dismiss off the menu bar:
Press ON SCREEN.
•
Example (for DVD AUDIO/DVD VIDEO)
• The time search function cannot be used during
program playback.
To play back from 2(H):34(M):00(S)
TIME _ : _ _ : _ _
To locate a desired scene from the
display [DIGEST]
Press “2”.
TIME 2 : _ _ : _ _
Press “3”.
Available :
TIME 2 : 3 _ : _ _
The unit can display the opening scene of each title or
chapter on a DVD VIDEO or each track of an SVCD/Video
CD. You can select a desired scene from those displayed
on the TV screen.
Press “4”.
TIME 2 : 3 4 : _ _
•
Example (for SVCD/Video CD/Audio CD)
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
TV
DVD
SELECT
To play back from 23(M):40(S)
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TIME
TIME
TIME
_ _ : _ _
TV8
8
TV0
0
MUTING
+10
Press “2”.
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
2 _ : _ _
ENTER
5/∞/2/3
ENTER
CH
-
Press “3”.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
2 3 : _ _
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
Press “4”.
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
DIGEST
3D
PHONIC
AMP VOL
TIME 2 3 : 4 _
RM-SXV016J
REMOTE CONTROL
You do not have to press “0” to enter the trailing zeros
(for the last two digits in the example above).
¶For DVD VIDEO:
During playback or while stopped
For SVCD/Video CD: In any condition except
SVCD/Video CD playback
with PBC
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
1 Press DIGEST.
English
To select a still picture on a DVD AUDIO
disc [PAGE]
Up to nine opening scenes are displayed.
Available :
Most DVD AUDIO discs include still pictures, which
usually appear in turn automatically during playback
according to the playback sequence. However, there are
other page(s) of the current still picture and you can
change the picture (turn the page) manually.
Depending on the disc type and whether the disc is
being played back or not, the contents shown on
the TV screen differ.
• At the beginning of a part where there are selectable
pictures, “PAGE” appears on the TV screen (except when
the “ON SCREEN GUIDE” preference is set to “OFF”). See
page 67 for details about “ON SCREEN GUIDE”
preferences.
Disc type Unit status
What is displayed
While stopped
DVD
The opening scene of
each title
TV
DVD
STANDBY/ON
During playback The opening scene of
each chapter in the
OPEN/
CLOSE
DISC
SELECT
VIDEO
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
current title
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
SVCD/
While stopped or The opening scene of
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
Video CD during playback each track
PAGE
CH
+
5/∞
VOL-
VOL+
ENTER
ENTER
CH
-
2 Use 5/∞/2/3to move
to the desired
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
scene.
SLOW-
SLOW+
VFP
If there are more than nine scenes, the digest
screen will have more than one page. In this case,
pressing ¢advances to the next page, and
pressing 4returns to the previous page.
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
¶During playback
(except when the status bar is shown)
1 Press PAGE.
The Page selection window appears on the TV
screen.
Selected scene
PAGE 1/32
• When the lower right scene is selected, pressing 3
advances to the next page if available. Similarly, when the
upper left scene is selected, pressing 2returns to the
previous page (if available).
1
• Depending on discs, it may take some time until all scenes
of the current page appear on the TV screen. If you want to
turn the page, you do not have to wait to press 4 or ¢
until all scenes appear.
2 Use PAGE or 5/∞to select the desired page.
3 Press ENTER.
Each time you press PAGE or 5/∞, the page
The unit starts playback from the selected scene.
number changes.
3 Press ENTER.
NOTE
• With some discs, depending on the contents, it may
take some times until all the scenes appear on the
screen.
The selected page (picture) is shown.
The Page selection window is dismissed.
NOTE
• The Page selection window will automatically
disappear if you do not change the page for several
seconds.
• You can also select the page via the menu bar.
See page 48.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
NOTE
To play back a bonus group of a DVD
AUDIO disc
• Once you enter the correct key number, the unit
memorizes it until you turn off the power or open the
carousel.
• If you specify a track in the bonus group when
programming tracks for the program playback, the
display window will also show the above display for
inquiring the key number.
Available :
Some DVD AUDIO discs contain a special group called
“bonus group” whose contents are not opened to the
public. The bonus group is always assigned to the last
group of a disc (for example, if a disc contains four
groups including a bonus group, “group 4” is the bonus
group).
• In the random playback mode, tracks in the bonus
group are not played back.
• To turn off the key number entry display, operate any
one of the following.
To play back a bonus group, you have to enter the
specific “key number” (a kind of password) for the
bonus group. A way of getting the key number depends
on discs.
After getting the key number, you can play back the
bonus group by the following procedure.
* Press 7.
* Open the disc tray carousel.
* Change the current disc.
* Turn the power off.
Opening the carousel or turning the power off also
erases the memory of the key number, while pressing 7
does not erase the memory.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
Numeric
buttons
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
¶While a disc containing a bonus group is stopped
1 Use the numeric buttons to select the bonus
group number (the last group).
The display window and on-screen display prompt
you to enter the key number as shown below.
(Display Window)
(TV screen)
KEY _ _ _ _
2 Use the numeric buttons (0 to 9) to enter the
key number.
If you enter the key number correctly, the unit starts
playback of the bonus group.
If you enter a wrong key number, the unit does not
start playback and the display window and TV
screen again prompt you to re-enter the key
number.
3 Press ENTER.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
4 a (for DVD AUDIO)
English
Specify selections in the desired order by disc,
group and track numbers using the numeric
buttons.
Changing the playback
order
You can play tracks on a DVD AUDIO, SVCD, Video CD or
Audio CD in the desired order or in random order.
• For each program step, using the numeric
buttons, specify a disc first, then specify a group,
finally, specify a track.
• For example, to specify “track 14 in group 2 of
disc 3,”
Press 3 → 2 → +10 → 4.
To play back in the desired order
[Program playback]
4 b (for SVCD/Video CD/Audio CD)
Specify selections in the desired order by disc
and track using the numeric buttons.
Available :
By programming tracks, you can play up to 99 tracks in
any order among multiple discs. You may program the
same track more than once.
• For each program step, using the numeric
buttons, specify a disc first, then press ENTER,
finally specify a track.
TV
DVD
STANDBY/ON
• For example, to specify “track 14 of disc 2,”
Press 2 → ENTER → +10 → 4.
(You can also use any of the numeric buttons
instead of the ENTER button. The number
entered for the group number is invalid.)
OPEN/
CLOSE
DISC
TV
DVD
SELECT
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
Numeric
buttons
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
2/3
CH
+
VOL
-
VOL+
ENTER
Up to 99 tracks can be programmed. You may
select the same track more than once.
CH
-
ON SCREEN
PREVIOUS
CLEAR
NEXT
ENTER
SELECT
STROBE
(Program table example for DVD AUDIO)
7
3
SLOW
-
SLOW+
VFP
Example for step 4a
Example for step 4b
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
PROGRAM
No.
Disc
Group
Track
14
14
6
8
6
1
2
3
4
5
3
2
4
5
6
7
7
2
-
¶While stopped
4
2
3
4
6
-
-
-
-
-
1 Press ON SCREEN twice.
6
7
14
20
The menu bar appears on the TV screen.
(See page 46 for details about the menu bar.)
8
9
10
PROG.
2 Use 2/3to move
to
.
USE NUMERIC KEYS TO PROGRAM TRACKS.
PRESS ENTER TO SKIP GROUP ENTRY FOR CD.
(Screen example for DVD AUDIO)
DISC 1 GROUP 3 TRACK 33 TOTAL 1:25:58
8.5Mbps
Selected group/track number
Selected disc number
OFF
TRACK PROG. RND. 1/3 PAGE 32/32
•
•
If you specify a wrong track
Use to move to the wrong track, then
press TV/VIDEO - CANCEL. The track is erased
and the subsequent programmed tracks move up.
3 Press ENTER.
5/
∞
The program table appears instead of the menu bar.
The PROGRAM indicator lights in the display
window on the front panel.
To clear the program while programming
(Program table example for DVD AUDIO)
Press 7.
You can also clear the program by opening the
carousel or changing the current disc.
PROGRAM
No.
Disc
Group
Track
1
2
3
4
5
6
7
8
9
10
USE NUMERIC KEYS TO PROGRAM TRACKS.
PRESS ENTER TO SKIP GROUP ENTRY FOR CD.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
5 Press 3to start program playback.
To play back in random order
[Random playback]
With a DVD AUDIO/SVCD/Video CD disc, the
program table is automatically dismissed when the
program playback starts.
With an Audio CD disc, the program table remains
on the TV screen during program playback.
However, pressing the ON SCREEN button brings
up the status bar.
When all of the programmed tracks have finished
playback, the unit stops and the program table
appears again.
Available :
You can play tracks on a disc in random order by using
the random function.
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
2/3
CH
+
VOL
-
VOL+
ENTER
CH
-
ON SCREEN
PREVIOUS
CLEAR
NEXT
ENTER
SELECT
STROBE
SLOW+
Note that the program remains.
SLOW-
REPEAT SUB TITLE AUDIO
VFP
•
To check the program contents
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
During playback, press 7. Playback stops and the
program table is shown.
3D
PHONIC
AMP VOL
When the unit is playing back an Audio CD and the
program table is not shown, you can bring up the
table by carrying out steps 1 to 3.
During DVD AUDIO/SVCD/Video CD playback, you can
check the program contents via the menu bar.
¶While stopped
1 Press ON SCREEN twice.
The menu bar appears on the TV screen.
(See page 46 for details about the menu bar.)
•
•
To quit program playback
RND.
2 Use 2/3to move
to
.
Press 7. Note that the program remains.
(Screen example for Audio CD)
To clear the program
DISC 1 TRACK 33 TIME 25:58
While stopped and the program table is shown on the
TV screen, press 7.
OFF
PROG. RND.
All the programmed tracks are erased. You can also
clear the program mode by turning off the unit or
opening the disc tray carousel.
3 Press ENTER.
The unit starts random playback.
•
To exit the program mode
With a DVD AUDIO/SVCD/Video CD disc, the menu
bar is automatically dismissed.
During random playback, the RANDOM indicator
lights in the display window on the front panel.
After playing all tracks on the disc, the unit stops
the disc and quits the random mode.
When the multiple discs are on the disc tray, the
unit skips the disc to a next one and start random
playback of the next disc after completing the
current disc playback.
After clearing all programmed tracks, press ON
SCREEN.
The program table is dismissed and the status bar
appears on the TV screen.
The PROGRAM indicator in the display window
disappears and the unit quits program playback
mode.
NOTES
• During program playback, you cannot edit the program
contents.
• During program playback, pressing ¢ skip to the next
selection of the program. Pressing 4returns to the
beginning of the current selection.
• The same track will not be played back more than once
during random playback.
• If you are going to program a track in the bonus group
of a DVD AUDIO, the unit will ask you to enter the key
number for the bonus group (see page 34).
• During random playback, if you bring up the menu bar and
carry out steps 1 to 3 above, the unit cancels the random
playback mode and continues playback from the current
selection in the recorded order.
• The resume function cannot be used with program
playback.
• In the random playback mode with the DVD AUDIO, tracks
in the bonus group are not played back (see page 34).
• To dismiss the program table:
Press ON SCREEN. The program table is dismissed and
the status bar is shown.
•
To stop and quit random playback
Press 7. The unit stops playback and quits the
random playback mode.
You can also clear the random mode by turning off the
unit or opening the disc tray carousel.
• To dismiss the menu bar (and the status bar):
Press ON SCREEN.
• Program playback function cannot be used during DVD
VIDEO/SVCD/Video CD playback with PBC function.
• The following buttons cannot function in program
playback: DISC 1-7, EXCHANGE (the indicators are
turned off), DISC SKIP, DISC SELECT (on the remote
control unit).
NOTES
• To dismiss the menu bar:
Press ON SCREEN.
• Random playback is carried out only within the disc
currently loaded.
• If you want to repeat the programmed tracks, set the
repeat mode during program playback.
• With some discs, program playback may not be done.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
Icons in
the
display
window
Indications
on the TV
screen
Repeat playback
Meanings
You can repeat playback of the current group or track (for
DVD AUDIO), current title or chapter (for DVD VIDEO) or
current or all tracks (for SVCD/Video CD/Audio CD).
You can also repeat playback of a desired part.
GROUP
TITLE
Repeats the current group for
DVD AUDIO.
Repeats the current title for DVD
VIDEO.
To repeat the current selection or all
tracks [Repeat playback]
DISC
Repeats all tracks on the current
disc for SVCD/Video CD/Audio
CD.
Available :
ALL
Repeats all the available discs.
TV
DVD
TRACK
STANDBY/ON
Repeats the current track for
DVD AUDIO/SVCD/Video CD/
Audio CD.
OPEN/
CLOSE
DISC
TV
DVD
SELECT
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
CHAP
OFF
Repeats the current chapter for
DVD VIDEO.
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL-
VOL+
ENTER
No
indication
The repeat mode is off.
CH
-
The unit plays back all available
discs unless there is any disc
that automatically pauses at the
menu. However, the unit stops
playback after the playback of
the disc 7.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
REPEAT
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
•
•
To stop repeat playback
Press 7.
¶For DVD AUDIO/DVD VIDEO:
During playback
For SVCD/Video CD/Audio CD:
In any condition except SVCD/
Video CD playback with PBC
When an SVCD, Video CD or Audio CD disc is set, the
unit stops playback but does not quit the repeat mode.
When a DVD AUDIO or DVD VIDEO disc is set, the unit
stops playback and quits the repeat mode.
To quit repeat playback
1 Press REPEAT.
Press REPEAT until the repeat mode indicator goes off
in the display window.
You can also clear the repeat mode by opening the
carousel or changing the current disc except in repeat
ALL mode.
Each time you press REPEAT, the repeat mode
switches cyclically.
You can see the selected mode by icons in the
display window on the front panel as below.
(Display window)
NOTES
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
• You can also select the repeat mode via the menu bar.
See pages 47, 48 and 49.
PROGRAM
RANDOM
• When the program playback mode is active with a DVD
AUDIO, SVCD, Video CD or Audio CD, the repeat mode
changes in the same manner.
Repeat mode indicators
On the TV screen, a window for repeat mode
indication appears. You can check the current
repeat mode from the window.
Note that, however, in the “
” mode the unit repeats all
the programmed tracks, instead of all tracks on the disc.
• During playback in the title/chapter/group/track repeat
mode, if you skip the title/chapter/group/track using
4/¢, etc., the destination title/chapter/group/track is
repeated.
The mode indication on the window is the same as
the one on the menu bar (see pages 47, 48 and 49).
(Screen example for repeat mode indication window.)
• If
playback
appears when pressing REPEAT during DVD VIDEO
CHAP.
If you press REPEAT while stopped, you need to
press 3to start repeat playback.
You cannot repeat the title or chapter because of the disc
contents.
• Repeat playback function cannot be used during SVCD/
Video CD playback with PBC function.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
During DVD VIDEO playback
To repeat a desired part
[A-B repeat playback]
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
CHAP. 1/3 1/5 1/3
8.5Mbps
A-B
Available :
Selected repeat mode
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
CHAPTER
TITLE
:
current chapter repeat
current title repeat
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
:
CH
+
VOL
-
VOL+
5/∞/2/3
ON SCREEN
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
ALL
A-B
OFF
:
repeats all the available
discs
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
:
repeats a desired part
(during playback only)
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
¶During playback except SVCD/Video CD playback
with PBC
•
During SVCD/Video CD/Audio CD playback
(Screen example for Audio CD)
1 Press ON SCREEN twice.
DISC 1 TRACK 33 TIME 25:58
PROG. RND.
The menu bar appears on the TV screen.
(See page 46 for details about the menu bar.)
A-B
2 Use 2/3to move
to
, then press
ENTER.
Selected repeat mode
The pull-down menu for repeat mode selection
appears under the
TRACK
:
current track repeat
.
3 Use 5/∞ to select “A-B.”
DISC
:
current disc repeat
Depending on the disc type and unit’s status the
repeat mode changes as follows:
ALL
A-B
OFF
:
repeats all the available
discs
•
During DVD AUDIO playback
DISC 1 GROUP 3 TRACK 33 TOTAL 1:25:58
PROG. RND. 1/3 PAGE 32/32
8.5Mbps
TRACK
:
repeats a desired part
(during playback only)
A-B
Selected repeat mode
TRACK
:
current track repeat
4 Press ENTER at the beginning of the part you
GROUP
:
current group repeat
want to repeat (point A).
The pull-down menu turns off.
A-
The repeat icon shows
.
ALL
A-B
OFF
:
repeats all the available
discs
(Screen example for DVD VIDEO)
8.5Mbps
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
CHAP. 1/3 1/5 1/3
:
repeats a desired part
(during playback only)
A-
Repeat icon
5 Press ENTER at the end of the part you want
to repeat (point B).
The repeat icon shows
A-B
.
The unit locates “A” and starts repeat playback
between “A” and “B.”
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
•
To quit A-B repeat playback
English
Press ENTER. The A-B repeat mode turns off, while the
playback continues.
You can also clear the A-B repeat mode by opening
the carousel or changing the current disc.
Changing the language,
sound and scene angle
With some DVD AUDIO/DVD VIDEO discs, you can
choose a desired subtitle language and/or audio
language/sound, as well as a desired camera angle.
Some DVD AUDIO discs support more than one audio
language/sound, with some DVD VIDEO discs support
more than one subtitle language and/or audio language/
sound.
• Selecting “OFF” from the pull-down menu for repeat mode
selection, or pressing 4/¢quits the A-B repeat mode
and continues playback.
• You can also stop and quit the A-B repeat mode by pressing
7.
Similarly, you can choose a desired audio channel (or
channel combination) of an SVCD/Video CD disc, as well
as a subtitle channel of an SVCD disc.
NOTES
• The A and B points must be set in the same title/
chapter/group/track.
• To dismiss the menu bar:
To select the subtitle language
[SUB TITLE]
Press ON SCREEN.
• If
appears when pressing ENTER during DVD VIDEO
playback
You cannot repeat the selected portion because of the
disc contents.
Available :
Some DVD AUDIO, DVD VIDEO and SVCD discs for
movies, guides, etc. contain more than one subtitle
language. You can choose a desired one from them.
• At the beginning of the part where the subtitle(s) is(are)
recorded,
appears on the TV screen (except when the
“ON SCREEN GUIDE” preference is set to “OFF”). See page
67 for details about “ON SCREEN GUIDE” preference.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
5/∞
VOL-
VOL+
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
SUB TITLE
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
¶During DVD AUDIO/DVD VIDEO/SVCD playback
(except when the status bar is shown)
1 Press SUB TITLE.
The Subtitle selection window appears on the TV
screen.
1/3
ENGLISH
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Use SUB TITLE or 5/∞to select the subtitle.
To change the audio language or sound
[AUDIO]
Each time you press SUB TITLE or 5/∞, the subtitle
language changes.
See the following examples for subtitle selection.
Available :
•
For DVD AUDIO/DVD VIDEO
By audio selection, you can choose the audio language of
movies or enjoy KARAOKE with or without the vocal.
Pressing SUB TITLE or 5/∞cycles among the
subtitles recorded on the disc.
Example:
1/3 ENGLISH
• At the beginning of the part where multiple audio sounds
are recorded,
appears on the TV screen (except when
the “ON SCREEN GUIDE” preference is set to “OFF”). See
page 67 for details about “ON SCREEN GUIDE” preference.
2/3 FRENCH
3/3 SPANISH
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
-/3 OFF
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
•
For SVCD
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
An SVCD disc can have up to four subtitles.
Pressing 5/∞cycles among those channels as
follows regardless of whether the subtitles are
recorded or not.
+
5/∞
VOL
-
VOL+
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
-/4 OFF
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
AUDIO-fs/Rate
3D
PHONIC
AMP VOL
1/4
2/4
3/4
4/4
RM-SXV016J
REMOTE CONTROL
¶During playback
(except when the status bar is shown)
1 Press AUDIO-fs/Rate.
The Audio selection window appears on the TV
screen.
3 Press ENTER.
Note that holding down AUDIO-fs/Rate for a few
seconds shows the sampling frequency and bit rate
(see page 45).
The subtitle in the selected language is shown.
The Subtitle selection window is dismissed.
NOTES
1/3
• For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See “Table of languages and their
abbreviations” on page 62.
ENGLISH
• The Subtitle selection window will automatically
disappear if you do not change the subtitle for several
seconds.
• When
DVD VIDEO disc):
appears on the TV screen (for DVD AUDIO/
2 Use AUDIO-fs/Rate or 5/∞to select the
desired audio.
You cannot select the subtitle or no subtitle is recorded.
Each time you press AUDIO-fs/Rate or 5/∞, the
audio changes.
See the following examples for audio selection.
• You can also select the subtitle via the menu bar. See
pages 49 and 51.
•
For DVD AUDIO/DVD VIDEO
Each time you press AUDIO-fs/Rate or 5/∞, the
audio language or sound changes.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Example:
English
To select a scene angle of DVD VIDEO
[ANGLE]
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
Available :
You can enjoy a variety of scene angles if the DVD VIDEO
disc contains “multi-angle” parts, where multiple
cameras were used to shoot the same scene from
different angles.
•
For SVCD/Video CD
Each time you press AUDIO-fs/Rate or 5/∞, the playback
audio changes as follows.
(for SVCD)
(for Video CD)
• At the beginning of a “multi-angle” part,
appears on the
TV screen (except when the “ON SCREEN GUIDE”
preference is set to “OFF”). See page 67 for details about
“ON SCREEN GUIDE” preference.
ST1
ST (stereo)
ST2
L-1
R-1
L-2
L
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
TV
DVD
SELECT
R
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
ENTER
5/∞/2/3
ENTER
ANGLE
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
3
SLOW
-
SLOW+
VFP
R-2
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
3 Press ENTER.
AMP VOL
You can hear the selected audio.
RM-SXV016J
REMOTE CONTROL
The audio selection window is dismissed.
NOTES
• For DVD VIDEO, the selected language may be abbreviated
on the TV screen. See “Table of languages and their
abbreviations” on page 62.
From Angle selection window
¶During DVD VIDEO playback
(except when the status bar is shown)
• The Audio selection window will automatically
disappear if you do not change the audio for several
seconds.
1 Press ANGLE.
• When
appears on the TV screen (for a DVD AUDIO/
The Angle selection window appears on the TV
screen.
DVD VIDEO disc):
You cannot select the audio.
• If only one audio sound is recorded, you cannot select
1/3
the audio.
1
• You can also select the audio via the menu bar. See
pages 48, 49 and 51.
2 Use ANGLE or 5/∞to select the desired
angle.
Each time you press ANGLE or 5/∞, the angle
changes.
Example:
1/3
2/3
3/3
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 Press ENTER.
You can see the picture from the selected angle.
Special picture playback
and picture/sound effect
You can see continuous still pictures or zoom in (or out) the
picture. You can also adjust the picture character, as well as
simulate surround sound using a stereo system.
The Angle selection window is dismissed.
(Display window)
ANGLE indicator
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B ANGLE
PROGRAM
RANDOM
The ANGLE indicator appears during angle-
selected playback.
To display continuous still pictures
[STROBE]
From the angle list
¶During DVD VIDEO playback
Available :
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
1 Press and hold ANGLE for more than 1
CH
+
VOL
-
VOL+
second.
ENTER
CH
-
Up to nine camera angles recorded on a disc
appear on the TV screen.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
8/STROBE
SLOW
-
REPEAT SUB TITLE AUDIO
VFP
fs/Rate PROGRESSIVE
SCAN
¶ During playback
1 At the point you want to view as continuous
photographs, press 8/STROBE.
The unit pauses playback.
The selected camera angle
2 Use 5/∞/2/3to select the desired angle.
3 Press ENTER or 3.
2 Press and hold 8/STROBE for more than 1
second.
Nine same frames (still pictures) appear on the TV
screen.
You can advance frames one by one by the
following step.
The unit starts playback by the selected angle on
the full-sized screen.
3 Press 8/STROBE once.
NOTES
The picture in the middle on the top row shows an
advanced frame from one in the left.
• The Angle selection window will automatically
disappear if you do not change the angle for several
seconds.
• When
appears on the TV screen in step 1:
The current scene is not recorded from multiple angles.
• During the operation from the angle list display, audio is
muted.
• You can also select the angle via the menu bar. See
page 49.
Advanced frame
Each press of 8/STROBE advances the frames one
by one.
Pressing 3instead of 8/STROBE advances each
frame in normal playback speed with a time delay
over the whole nine pictures (while the sound is
muted).
•
To return to the normal screen
Press and hold 8/STROBE for more than 1 second.
NOTE
• If you press and hold 8/STROBE for more than 1 second
during playback, nine still pictures also appear but they
advance in normal playback speed (while the sound is
muted).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
To zoom in/out pictures [ZOOM]
To adjust the picture character [VFP]
Available :
Available :
CH
+
The VFP (Video Fine Processor) function allows you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
VOL
-
VOL+
ENTER
5/∞/2/3
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
SLOW
-
CH
+
VOL-
VOL+
REPEAT SUB TITLE AUDIO
VFP
ENTER
5/∞/2/3
ENTER
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
CH
-
ZOOM +/–
3D
PHONIC
AMP VOL
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
SLOW-
RM-SXV016J
REMOTE CONTROL
¶During playback or while paused
1 Press ZOOM + or –.
REPEAT SUB TITLE AUDIO
VFP
VFP -
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
PROGRESSIVE
SCAN
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
The unit zooms in by pressing ZOOM + or zooms
out by pressing ZOOM –.
¶During playback (for DVD VIDEO: During playback
while picture is shown)
Each time you press ZOOM +, the magnification is
doubled (up to x 1024).
Each time you press ZOOM –, the magnification is
halved (down to x 1/8).
1 Press VFP - PROGRESSIVE SCAN.
The VFP mode selection window appears on the TV
screen.
Note that holding down VFP - PROGRESSIVE SCAN
for a few seconds changes the scanning mode (see
page 8).
2 Use 2/3to select the desired preset.
Each time you press the button, the VFP mode
changes as follows.
Set the video type most suitable to the current
program or the room conditions.
ZOOM x 4
Selected preset
NORMAL
USER 1
CINEMA
GAMMA
+
+
0
0
At the top-left of the screen, the information for the
current magnification appears. While zoomed in,
the indication for the zoomed-in position, which
can be moved by operating the next step, appears
together.
BRIGHTNESS
CONTRAST
+10
USER 1
USER 2
SATURATION +10
TINT
+10
SHARPNESS
Y DELAY
+
+
0
0
2 Use 5/∞/2/3to move the zoomed position.
Parameter
ZOOM x 4
•
•
NORMAL
This mode is suitable for watching TV in a
general room and you cannot change
parameters.
CINEMA
NOTES
• To return to normal playback
This mode is suitable for watching a movie
software in a room with suppressed light. They
are factory presets and you cannot change
parameters for them.
Press ENTER.
• While zoomed, the picture may look coarse.
• The zoom information on the screen will disappear if
you do not operate the zoom function for five seconds.
•
USER 1/USER 2
You can adjust parameters that affect the picture
character and store the settings as the user
preset. See the next step.
• The indication for the zoomed-in position appears again
when you press ZOOM +/–, or 5/∞/2/3.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 To define a user setting, select a parameter to
be edited using 5/∞from the following.
To simulate surround sound
[3D PHONIC]
•
GAMMA
Controls the brightness of a shaded portion
without changing the brightness of the entire
picture.
Available :
This control is optimum when you adjust the
pictures of software which generates subdued
black in a bright room.
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
STANDBY/ON
The setting range is +4 to -4.
OPEN/
CLOSE
DISC
TV
DVD
SELECT
TV1
1
TV2
TV3
3
•
•
•
•
BRIGHTNESS
Controls the brightness of the screen.
The setting range is +16 to -16.
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
CONTRAST
Controls the contrast of the screen.
The setting range is +16 to -16.
+
VOL-
VOL+
ENTER
5/∞/2/3
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SATURATION
Controls the color depth of the screen.
The setting range is +16 to -16.
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
TINT
AMP VOL
3D PHONIC
Controls the tint of the screen.
Use the appearance of a natural complexion as
the guideline.
RM-SXV016J
REMOTE CONTROL
The setting range is +16 to -16.
¶During playback
•
•
SHARPNESS
Controls the sharpness of the screen.
The setting range is +3 to 0.
1 Press 3D PHONIC.
The 3D PHONIC window appears on the TV screen.
Y DELAY
2 Use 2/3to select the desired mode.
Controls the color gap of the screen.
The setting range is +2 to -2.
Each time you press the button, the 3D PHONIC
mode changes as follows:
4 Press ENTER.
ACTION
DRAMA
THEATER
A window for setting parameters appears instead
of the VFP mode selection window.
ACTION
4
SATURATION
+ 4
NONE
Selected effect mode
ACTION
•
•
•
Selected parameter
Suitable for action movies and sports programs
in which sounds dynamically move.
5 Use 5/∞to adjust the level of the parameter.
The higher value enhances the effect.
DRAMA
Natural and warm sound. You can enjoy movies
in a relaxed mood.
6 Press ENTER.
The parameter is set and the VFP mode selection
window appears again.
THEATER
Repeat steps 3 to 6 if you want to set other
parameters.
You can enjoy sound effects like in a major
theater in Hollywood.
NOTES
• The number of setting steps depends on parameters.
• To dismiss the VFP mode selection window:
Press VFP - PROGRESSIVE SCAN.
• The window for VFP mode selection and parameter
setting disappears if no operation is made for about 10
seconds.
• The VFP function cannot be used during JPEG playback.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
3 Press 5/∞to adjust the effect level.
English
You can select the effect level among “1” to “5.”
Checking the sampling
The higher value enhances the effect.
frequency and bit rate
Available :
You can check the sampling frequency and bit rate of
digital audio during playback.
TV
DVD
STANDBY/ON
ACTION
4
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
Effect level
.
CH
+
VOL
-
VOL+
ENTER
CH
-
NOTES
PREVIOUS
CLEAR
NEXT
• To dismiss the 3D PHONIC window:
SELECT
STROBE
SLOW
-
SLOW+
VFP
Press 3D PHONIC.
REPEAT SUB TITLE AUDIO
• The 3D PHONIC window disappears if no operation is
made for about 10 seconds.
fs/Rate PROGRESSIVE
SCAN
ZOOM
AUDIO-fs/Rate
DIGEST ANGLE
3D
PHONIC
AMP VOL
• The 3D PHONIC function works correctly only when
playing back a DVD VIDEO disc recorded with the Dolby
Digital. With other sources, you cannot get any effect if
you press the 3D PHONIC button.
RM-SXV016J
REMOTE CONTROL
¶ During playback
• When playing back a DVD VIDEO disc recorded with the
Dolby Digital that does not contain the rear signal, you
cannot get a correct 3D PHONIC sound though you can
change the 3D PHONIC setting.
1 Press and hold down AUDIO-fs/Rate for a few
seconds.
• The 3D PHONIC function does not affect the Dolby
Digital bitstream signal from the DIGITAL OUT jacks.
The sampling frequency and bit rate of the current
digital audio are shown in the display window and
are stayed on.
• When you set the 3D PHONIC function is active, the
“ANALOG OUT” and “D. RANGE COMPRESSION”
settings in the “AUDIO” preference display are disabled.
(Example for Audio CD)
M
G
BY
TAL
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
Bit rate
Sampling
frequency
The sampling frequencies indicated are as follows:
44.1, 48.0, 88.2, 96.0, 176.4, and 192 (kHz). Note that
any figure below the first decimal place is omitted
in the display window.
NOTE
• With some discs, “NO INFO.” may appear instead of the
sampling frequency and bit rate.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Basic operation procedure
Menu bar functions
TV
DVD
This section describes the functions you can perform via
the menu bar.
The available menu bar functions differ depending on
the disc type.
STANDBY/ON
OPEN/
CLOSE
DISC
TV
DVD
SELECT
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
To bring up the menu bar
2/3
VOL
-
VOL+
ENTER
TV7
7
TV8
8
TV9
9
ENTER
CH
-
TV-/--
TV0
MUTING
PREVIOUS
CLEAR
NEXT
10
0
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
SELECT
STROBE
CH
+
SLOW
-
SLOW+
VFP
VOL
-
VOL+
ENTER
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
CH
-
ON SCREEN
DIGEST ANGLE
PREVIOUS
CLEAR
NEXT
3D
PHONIC
AMP VOL
SELECT
STROBE
SLOW
-
SLOW+
VFP
RM-SXV016J
REMOTE CONTROL
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
1 Use 2/3to select the icon you want to work
¶When a disc is inserted
with.
1 Press ON SCREEN.
The selected icon is pointed by
.
The status bar, according to the disc type, appears
on the TV screen.
DISC 1 GROUP 3 TRACK 33 TOTAL 1:25:58
TRACK PROG. RND. 1/3 PAGE 32/32
8.5Mbps
See page 27 about the status bar.
OFF
(Example of the status bar for DVD VIDEO)
2 Press ENTER.
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
With many icons, an appropriate pull-down
window appears, however, there are some
exceptions.
2 Press ON SCREEN again.
The appropriate menu bar, according to the disc
type, appears together with the status bar. The
menu bar includes some icons which indicate the
associated functions.
• See the following pages for details about each
function.
• Note that some functions are not available during
playback. (You cannot move
icon when it is not available.)
to the associated
(for DVD AUDIO)
DISC 1 GROUP 3 TRACK 33 TOTAL 1:25:58
TRACK PROG. RND. 1/3 PAGE 32/32
8.5Mbps
NOTES
OFF
• When
appears on the TV screen:
(for DVD VIDEO)
You cannot use the selected function because of disc
contents.
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
CHAP. 1/3 1/5 1/3
8.5Mbps
OFF
• A mark or text on the menu icon for the function or
mode currently selected is shown in blue.
(for SVCD)
DISC 1 TRACK 33 TIME
PROG. RND. -/4
ST1
25:58
OFF
(for Video CD)
DISC 1 TRACK 33 TIME
PROG. RND. ST
25:58
OFF
(for Audio CD)
OFF
DISC 1 TRACK 33 TIME 25:58
PROG. RND.
NOTE
• To dismiss the menu bar (and status bar):
Press ON SCREEN.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
Menu bar functions for DVD AUDIO
The following table shows the menu bar
functions available for DVD AUDIO.
Note that, in the description of the
operation column, we assume the
associated icon is selected.
DISC 1 GROUP 3 TRACK 33 TOTAL 1:25:58
8.5Mbps
OFF
TRACK
PROG. RND.
1/3 PAGE 32/32
Menu icons
2
3
4
6
7
8
1
5
Selected Icon
Operation
Note
• If the disc has only one group and
one track, “TOTAL” and “TIME” show
the same value.
Press ENTER to select the time mode among the
following.
1
Time mode selection
(During playback only)
TIME
REM
TOTAL
T.REM
Return to initial
• TIME:
Current track elapsed time
Selects the time mode shown in
the display window on the front
panel and in the status bar.
• REM:
Current track remaining time
Current group elapsed time
Current group remaining time
• TOTAL:
• T.REM:
• If you select “OFF” during repeat
playback, the unit continues playback
without repeating.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select the repeat mode among the
following.
2
Repeat mode
(During playback only)
• For the subsequent operations for the
A-B repeat, see page 38.
TRACK jGROUP jALL j A-B j OFF
• TRACK: Current Track repeat
Select the repeat mode.
• GROUP: Current group repeat
• “A-B” is not shown in stop mode.
• ALL:
• A-B:
Repeats all the available discs
Repeats a desired part (A-B repeat)
3 Press ENTER to make the selected repeat
function active.
(See pages 37 to 39 for details about repeat function.)
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired time.
3 Press ENTER to play back from the specified
time.
3
Time search
Specifies the elapsed time from the
beginning of the current group,
from which the unit starts
playback.
(See page 31 for details about time search function.)
• The “10” and “+10” buttons are not
used in this function.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired track
number.
TRACK
4
Track search
• You can also locate a desired track
directly by specifying the track
number using the numeric buttons
during playback. See page 25.
Specifies a desired track to be
played back from.
• For example of entering “12,” press “1” then “2.”
3 Press ENTER to play back from the specified
track.
• When the track number is incorrect:
Overwrite the incorrect number with the correct
number.
1 Press ENTER to bring up the program table.
2 Specify tracks in the desired order using the
numeric buttons.
PROG.
5
Program
(While stopped only)
3 Press 3to start program playback.
(See page 35 for details about program playback.)
Specifies the playback order of
tracks.
1 Press ENTER to activate random playback.
(See page 36 for details about random playback.)
6
RND.
Random
(While stopped only)
Activates random playback.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Selected Icon
Operation
Note
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired audio language or
sound.
7
Audio selection
(During playback only)
Example:
Selects the audio language or
sound.
1/3 ENGLISH j2/3 FRENCH j 3/3 SPANISH
3 Press ENTER to play back with the selected
audio.
(See page 40 for details about audio selection.)
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired page number.
3 Press ENTER to play back with the selected page.
(See page 33 for details about page selection.)
PAGE
8
Page selection
(During playback only)
Selects the page.
Menu bar functions for DVD VIDEO
The following table shows the menu bar
functions available for DVD VIDEO.
Note that, in the description of the
operation column, we assume the
associated icon is selected.
DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58
8.5Mbps
OFF
CHAP.
1/3
1/5
1/3
Menu icons
2
3
4
6
7
1
5
Selected Icon
Operation
Note
• If the disc has only one title and one
chapter, “TOTAL” and “TIME” show
the same value.
Press ENTER to select the time mode among the
following.
1
Time mode selection
(During playback only)
TOTAL
T.REM
TIME
REM
Return to initial
• TOTAL:
Current title elapsed time
Selects the time mode shown in
the display window on the front
panel and in the status bar.
• T.REM:
• TIME:
• REM:
Current title remaining time
Current chapter elapsed time
Current chapter remaining time
• If you select “OFF” during repeat
playback, the unit continues playback
without repeating.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select the repeat mode among the
following.
2
Repeat mode
(During playback only)
CHAPTER j TITLE jALL jA-B jOFF
• CHAPTER:Current chapter repeat
• For the subsequent operations for the
A-B repeat, see page 38.
Select the repeat mode.
• TITLE:
• ALL:
• A-B:
Current title repeat
• “A-B” is not shown in stop mode.
Repeats all the available discs.
Repeats a desired part (A-B repeat)
3 Press ENTER to make the selected repeat
function active.
(See pages 37 to 39 for details about repeat function.)
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired time.
3 Press ENTER to play back from the specified
time.
3
Time search
Specifies the elapsed time from the
beginning of the current title, from
which the unit starts playback.
(See page 31 for details about time search function.)
• The “10” and “+10” buttons are not
used in this function.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired chapter
number.
CHAP.
4
Chapter search
• You can also locate a desired chapter
directly by specifying the chapter
number using the numeric buttons
during playback. See page 25.
(During playback only)
• For example of entering “12”, press “1” then “2”.
Specifies a desired chapter to be
played back from.
3 Press ENTER to play back from the specified
chapter.
• When the chapter number is incorrect:
Overwrite the incorrect number with the correct
number.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
Selected Icon
Operation
Note
• For DVD VIDEO, the selected
language may be abbreviated on
the TV screen. See “Table of
languages and their abbreviations”
on page 62.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired audio language or
sound.
5
Audio selection
(During playback only)
Example:
Selects the audio language or
sound.
1/3 ENGLISH j2/3 FRENCH j 3/3 SPANISH
3 Press ENTER to play back with the selected
audio.
(See page 40 for details about audio selection.)
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired subtitle language.
Example:
6
Subtitle selection
(During playback only)
1/3 ENGLISH j2/3 FRENCH j 3/3 SPANISH j
-/3 OFF
Selects the subtitle language.
3 Press ENTER to play back with the selected
subtitle.
(See page 39 for details about subtitle selection.)
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a scene angle.
Example:
1/3 j2/3 j3/3
3 Press ENTER to play back with the selected
scene angle.
7
Angle selection
(during playback only)
Selects a desired scene angle in
the multi-angle part.
(See page 41 for details about angle selection.)
Menu bar functions for SVCD/Video CD/Audio CD
DISC 1 TRACK 33 TIME
25:58
25:58
OFF
2
OFF
2
OFF
2
PROG. RND.
ST1
-/4
Menu icons
The following table shows the menu bar
functions available for SVCD/Video CD/
Audio CD.
Note that, in the description of the
operation column, we assume the
associated icon is selected.
3
3
3
4
5
6
7
1
1
1
DISC 1 TRACK 33 TIME
PROG. RND. ST
Menu icons
4
6
5
DISC 1 TRACK 33 TIME 25:58
PROG. RND.
Menu icons
4
5
Selected Icon
Operation
Note
Press ENTER to select the time mode among the
following.
• When you select “REM” while
stopped, you can change the track
by pressing 4or ¢.
Return to initial
1
Time mode selection
TIME
REM
TOTAL
T.REM
Selects the time mode shown in
the display window on the front
panel and in the status bar.
• TIME:
Current track elapsed time
• During stopped, “REM” shows the
recording time of the current track,
while “T.REM” shows the total time
of the disc.
• REM:
Current track remaining time
Disc elapsed time
• TOTAL:
• T.REM:
Disc remaining time
• If you select “OFF” during repeat
playback, the unit continues
playback without repeating.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select the repeat mode among the
following.
2
Repeat mode
Select the repeat mode.
(During SVCD/Video CD playback
only)
• For the subsequent operations for
the A-B repeat, see page 38.
OFF jTRACK jDISC jALL j A-B j OFF
• TRACK: Current track repeat
• “A-B” is not shown in stop mode.
• DISC:
• ALL:
• A-B:
Repeats all tracks on the current disc.
Repeats all the available discs.
Repeats a desired part (A-B repeat)
3 Press ENTER to make the selected repeat
function active.
(See pages 37 to 39 for details about repeat function.)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Selected Icon
Operation
Note
• This function cannot be used during
program playback.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired time.
3 Press ENTER to play back from the specified
time.
3
Time search
(Except during SVCD/Video CD
playback with PBC)
(See page 31 for details about time search function.)
Specifies the elapsed time from
the beginning of the disc, from
which the unit starts playback.
1 Press ENTER to bring up the program table.
2 Specify tracks in the desired order using the
numeric buttons.
PROG.
4
Program
(While stopped only)
3 Press 3to start program playback.
(See page 35 for details about program playback.)
Specifies the playback order of
tracks.
1 Press ENTER to activate random playback.
(See page 36 for details about random playback.)
5
RND.
Random
(While stopped only)
Activates random playback.
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired audio channel(s).
3 Press ENTER to play back with the selected
audio channel(s).
6
Audio selection
(During SVCD/Video CD playback
only)
(See page 40 for details about audio selection.)
Selects the audio channel(s).
1 Press ENTER to open the pull-down window.
2 Use 5/∞to select a desired subtitle.
3 Press ENTER to play back with the selected
subtitle.
7
Subtitle selection
(During SVCD playback only)
Selects the subtitle.
(See page 39 for details about subtitle selection.)
50
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
The unit can play back MP3 files on a private CD-R/RW
disc or commercial CD. We refer to a disc that contains
MP3 file as an “MP3 disc” in this manual.
Though available functions with MP3 discs are limited,
operations for the available functions are similar to those
with Audio CD discs.
Note that, if a disc contains both of MP3 and JPEG files,
you can only play back files of either type selected by the
MP3/JPEG setting in the PICTURE preference display
(see page 64).
English
English
English
NOTES
• Some discs may not be played back because of the disc
characteristics or recording condition.
• Some tracks on an MP3 disc are skipped and may not
be played back normally because of the disc
configuration or characteristics determined by the
writing (encoding) software and hardware used for
recording. Such symptoms may occur regardless of
whether using a disc you recorded or using a
commercially available disc.
• The unit does not support “packet writing” discs.
• The unit does not support the ID3 tag.
What is MP3?
“MP3” stands for “MPEG Audio Layer-3,” and is the
part of the MPEG standard. It can store high quality
stereo audio using very little space by only saving the
audible sounds and discarding the sounds your ears
won’t pick up. A CD can store up to around 10 hours of
MP3 audio, which is 10 times as much as Audio CD.
• If the disc is recorded with multiple sessions, the unit
supports up to five sessions.
• You cannot play back Tracks in the desired
(programmed) or random order.
• The unit only can play back Tracks with any of the
following file extensions; “.MP3”, “.Mp3”, “.mp3” and
“.mP3”.
NOTE
• Time required for reading the disc contents differs with
discs, depending on the numbers of Groups (folders)
and Tracks (files) recorded, etc.
Make sure that the TV - DVD switch on
the remote control unit is set to “DVD”
when using the 5/∞/2/3and numeric
buttons for controlling the unit.
TV
DVD
• While an MP3 disc is loaded, you cannot bring up any
preference display (see pages 60 and 61).
About MP3 disc
Operations
Basic operations
Available :
On an MP3 disc, each material (song) is recorded on a
file. Files are sometimes grouped into a folder by artist,
album, category, etc. In addition, a folder can be a
member of another folder, creating hierarchical folder
layers. If you are familiar with a personal computer, you
may easily understand the hierarchical file/folder
construction of MP3 discs.
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
Basic control
buttons
ENTER
This unit simplifies the hierarchical construction of a disc
and manages files and folders by “Tracks” and “Groups”
in the following manners.
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
SLOW-
• Each file is regarded as a Track.
REPEAT SUB TITLE AUDIO
VFP
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
• A folder which has one or more files (Tracks) is
regarded as a Group.
3D
PHONIC
AMP VOL
• A folders’ folder which does not manage any file
directly is ignored.
• Files which do not belong to any folder are grouped
into “Group 1.”
• The unit recognizes up to 150 Tracks per Group, and up
to 99 Groups per disc. It ignores those exceeding the
maximum numbers and cannot play back them. If
there is any type of files other than MP3 files in a
folder. Those files are also counted down from the
total number of 150.
The following table shows basic functions of basic
control buttons.
Buttons
Functions
Starts playback while stopped.
ENTER
Starts playback while stopped or
paused.
3
7
8
Stops playback.
Pauses playback.
Group 1
Group 2
Skips back or forward a Track in the
Group* during playback.
Selects the previous or next Track in the
Group* while stopped.
up to 99 Groups
per disc
Group 1'
Track 1
4/¢
up to 150 Tracks per Group
*You can skip a Track across a Group.
• If you press 3during playback, or press 7to stop
playback followed by 3, the unit starts playback from
the beginning of the current track.
• The 5/∞buttons work the same as the 4/¢
buttons.
NOTES for making a private MP3 disc
using a CD-R/CD-RW disc:
• Select “ISO 9660” as the disc format.
• Finalize the disc after completing recording.
• We recommend to record a material at 44.1-kHz Fs and
at the 128-kbps data transfer rate.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
2 Use 5/∞to move the bar to a desired Group.
NOTES
On the right column, Tracks in the selected Group
are shown.
• The current Group and Track numbers are shown on the
display window in the following manner.
When selecting a Group, Track 1 is initially selected
(highlighted).
LPCM
-
VCDVD
GROUP TITLE TRACK CHAP
1
A B
MDOPELBGY 38
PROGRAM
DIGITAL
DTS
RANDOM
3 Use 4/¢to select a desired Track, then
press ENTER or 3.
Current Group CurrentTrack
number number
Current track
elapsed time
or
Use the numeric buttons to directly specify a
desired Track number.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
• You cannot advance or reverse playback of an MP3 disc
rapidly.
• You cannot see any other time information but the
current track elapsed time.
Examples:
To select 13: +10 → 3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
To select 150: +10 (14 times) → 10
Selecting the desired Group
and Track
Available :
When loading an MP3 disc, after the disc contents are
read, the MP3 CONTROL display automatically appears
on the TV screen.
The unit starts playback from the selected Track.
In the MP3 CONTROL display and the display window
on the front panel, you can see the current Group and
Track numbers, as well as Track elapsed time.
MP3 CONTROL
Group : 01 / 10
Track : 01 / 06 (Total 28)
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
Current Track elapsed time
MP3 CONTROL
Group : 01 / 10
Time : 00:03:08
Track : 01 / 06 (Total 28)
spring
sumer
fall
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
winter
sea
mountain
camp
picnic
skiing
flower
orchard grass.mp3
petunia.mp3
north pole.mp3
You can specify the desired Group/Track from the display
by the following procedure.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
Group
column
Track column of the
current Group
Selected
Track
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
Numeric
buttons
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
5/∞/2/3
4/¢
VOL
-
VOL+
• You can also select a desired Track by pressing 3to move
the black bar to the right (Track) column then using 5/∞.
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
NOTES
SLOW
-
SLOW+
VFP
3
• Up to 32 characters are displayed as a group or track
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
name on the MP3 CONTROL display.
3D
PHONIC
AMP VOL
• If an MP3 file name includes any 2-byte character, the
unit may not show the file name correctly.
RM-SXV016J
REMOTE CONTROL
• Only MP3 files are shown on the MP3 CONTROL display.
• The order of Groups/Tracks shown in the MP3
CONTROL display may differ from the order shown on
your personal computer when you set the disc on your
computer.
¶When the MP3 CONTROL display is shown.
1 Make sure that the black (cursor) bar is in the
• If you remove the MP3 disc, the MP3 CONTROL display
disappears.
left (Group) column.
If it is in the right column, press 2to move it to the
left column.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
Available :
English
English
English
Direct selection
Repeat playback
Available :
You can repeat playback of the current Track, current
Group or all MP3 files on the disc.
You can select a desired Group directly by specifying the
Group number.
CH
+
VOL-
VOL+
ENTER
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
CH
-
PREVIOUS
CLEAR
NEXT
TV1
1
TV2
TV3
3
2
TV5
5
SELECT
STROBE
SLOW+
TV4
TV6
Numeric
buttons
4
TV7
7
TV-/--
10
6
TV9
9
TV8
SLOW-
8
TV0
0
MUTING
REPEAT SUB TITLE AUDIO
VFP
+10
TITLE/
TV/VIDEO
CANCEL
RETURN
PAGE
GROUP
REPEAT
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
CH
+
TITLE/GROUP
3D
PHONIC
AMP VOL
VOL
-
VOL+
ENTER
CH
-
RM-SXV016J
REMOTE CONTROL
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
¶During playback or while stopped
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
1 Press REPEAT.
3D
PHONIC
AMP VOL
Each time you press REPEAT, the repeat mode
changes as follows. You can see the current mode
via the display window as well as the MP3
CONTROL display.
If you press REPEAT while stopped, you need to
press ENTER or 3to start repeat playback.
RM-SXV016J
REMOTE CONTROL
¶During playback or while stopped
1 Press TITLE/GROUP.
“--” is shown in the Group display area of the
MP3 CONTROL Display
Function
display window.
display
Window
REPEAT TRACK
Repeats the current
Track.
(Example for the indication of window)
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
REPEAT GROUP
REPEAT DISC
REPEAT ALL
Repeats all Tracks in
the current Group.
PROGRAM
RANDOM
Repeats all Tracks on
the disc.
Group
Current track
display area number
Repeats all Tracks on
the loaded discs.
No indication
(TV screen)
The repeat mode is off.
2 Use the numeric buttons to specify a desired
Group number.
Selected repeat mode
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13: +10 → 3
MP3 CONTROL
Group : 01 / 10
REPEAT TRACK
Track : 01 / 06 (Total 28)
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
Specify the Group number within several seconds
after pressing TITLE/GROUP (i.e. while the display
window shows “--” for the Group number, instead
of the current Group number).
The unit starts playback from Track 1 of the selected
Group.
(Display window)
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
Repeat mode indicator
Press 7. Note that the repeat mode remains.
3 Use the numeric buttons to specify a desired
Track number.
•
To quit repeat playback
During playback, press REPEAT as many times until
no repeat icon is shown on the display window.
While stopped, press REPEAT as many times until
repeat mode indication on the MP3 CONTROL display
goes off.
The unit starts playback from the specified Track.
You can also use 4/¢or 5/∞for specifying a
track, instead of the numeric buttons.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
Checking the sampling frequency and
bit rate
Available :
You can check the sampling frequency and bit rate of
digital audio during playback.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
AUDIO-fs/Rate
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
¶ During playback
1 Press and hold down AUDIO-fs/Rate for a few
seconds.
The sampling frequency and bit rate of the current
digital audio are shown in the display window
temporarily.
(Example)
CM
EG
LBY
GITAL
S
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
Bit rate
Sampling
frequency
Note that any figure below the first decimal place is
omitted in the display window.
NOTE
• With some discs, “NO INFO.” may appear instead of the
sampling frequency and bit rate.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
The unit can play back JPEG files on a private CD-R/RW
disc. We refer to a disc that contains JPEG files as a
“JPEG disc” in this manual.
Note that, if a disc contains both of MP3 and JPEG files,
you can only play back files of either type selected by the
MP3/JPEG setting in the PICTURE preference display
(See page 64).
English
English
English
NOTES for making a private JPEG disc
using a CD-R/CD-RW disc:
• Select “ISO 9660” as the disc format.
• Finalize the disc after completing recording.
• We recommend to record a material at “640 x 480”
resolution.
• The unit supports only the baseline JPEG type,
therefore, it cannot display pictures of the other types
(progressive and lossless). If a JPEG disc contains JPEG
files of non-baseline type, the unit recognizes those
files as JPEG files. the JPEG CONTROL display and the
display window shows the information of the contents
(file name, file number, etc.), but you cannot show the
still pictures of those files (the TV screen appears only
in black).
What is JPEG?
“JPEG” is an abbreviation for the Joint Photographic
Experts Group and is an image format that utilizes a
compression technique.
There are three sub-types of the JPEG format as
follows.
• baseline JPEG: used for digital cameras, web, etc.
• progressive JPEG: used for web
• lossless JPEG: an old type and rarely used now
The unit supports only the baseline JPEG type,
therefore, it cannot display pictures of the other types
(progressive and lossless). If a JPEG disc contains
JPEG files of non-baseline type, the unit recognizes
those files as JPEG files, the JPEG CONTROL display
and the display window shows the information of the
contents (file name, file number, etc.), but you cannot
show the still pictures of those files (the TV screen
appears only in black and “NON PLAYABLE FILE” is
shown in the display window).
NOTES
• The unit does not support “packet writing” discs.
• If the disc is recorded with multiple sessions, the unit
supports up to five sessions.
• Some discs may not be played back, or take some times to
open the whole picture because of the disc characteristics
or recording condition.
• You cannot play back files in the desired (programmed)
or random order.
• The screen saver function is activated while same
picture is displayed for more than 5 minutes except
during slide show playback (see page 57).
NOTE
• The unit only can play back files with any of the
following file extensions; “.jpg”, “.jpeg”, “.JPG”, “.JPEG”
and any uppercase and lowercase combination (such as
“.Jpg”).
Make sure that the TV - DVD switch on
the remote control unit is set to “DVD”
when using the 5/∞/2/3, numeric
buttons for controlling the unit.
TV
DVD
• If a JPEG file name includes any 2-byte character, the
unit may not show the file name correctly.
• When a picture resolution is more than “640 x 480”, it
takes some time to open the whole picture.
About JPEG disc
On a JPEG disc, each material (still picture) is recorded on a
file. Files may be grouped into a folder by category, etc. In
addition, a folder can be a member of another folder,
creating hierarchical folder layers. If you are familiar with a
personal computer, you may easily understand the
hierarchical file/folder construction of JPEG discs.
This unit simplifies the hierarchical construction of a disc
and manages folders by “Groups” in the following
manners.
• Carry out an operation after opening the whole
picture.The unit does not accept any operation
(Stopping the unit, zooming in/out a picture etc.) while
opening the picture.
• Time required for reading the disc contents differs with
discs, depending on the numbers of Groups (folders)
and files recorded, etc.
• If you play back a non-baseline JPEG file:
The unit cannot display the still picture of the file. (The
TV screen appears only in black.) In this case, other
operations (such as stopping playback, selecting a file,
etc.) are possible but may take a long time.
• A folder which has one or more files is regarded as a
Group.
• A folders’ folder which does not manage any file
directly is ignored.
• While a JPEG disc is loaded, you cannot bring up any
preference display (see pages 60 and 61).
• The available horizontal resolution of a JPEG file is up to
2,400 lines.
• Files which do not belong to any folder are grouped
into “Group 1.”
• The unit recognizes up to 150 files per Group, and up
to 99 Groups per disc. It ignores those exceeding the
maximum numbers and cannot play back them. If
there is any type of files other than JPEG files in a
folder. Those files are also counted down from the
total number of 150.
Group 1
Group 2
up to 99 Groups
per disc
Group 1'
file 1
up to 150 files per directory
55
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
3 Use 4/¢to select a desired file.
4 Press ENTER.
Basic operations
The selected file (still picture) is shown on the TV.
In the display window, you can see the current
Group and file numbers.
To see a desired picture
JPEG
Available :
JPEG CONTROL
When loading a JPEG disc, after the disc contents are
read, the JPEG CONTROL display automatically appears
on the TV screen.
Group : 01 / 10
File : 01 / 06 (Total 28)
spring
sumer
fall
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
winter
sea
mountain
camp
picnic
skiing
flower
orchard grass.jpg
petunia.jpg
north pole.jpg
JPEG CONTROL
Group : 01 / 10
File : 01 / 06 (Total 28)
spring
sumer
fall
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
winter
sea
mountain
camp
picnic
skiing
flower
orchard grass.jpg
petunia.jpg
north pole.jpg
Group
column
File column of the
current Group
Selected
file
• You can also select a desired file by pressing 3to move the
black bar to the right (file) column then using 5/∞.
You can select a desired file for playback via this display.
• To return the black bar to the Group column, press 2.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
•
•
To play back another picture:
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
Use 4/¢or 5/∞to select the desired picture.
You can select a picture in another Group.
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
To dismiss the picture:
5/∞/2/3
4/¢
VOL-
VOL+
ENTER
ENTER
Press 7or MENU.
The TV screen returns to the JPEG CONTROL
display.
Changing the disc dismisses the JPEG CONTROL
display, and the opening screen appears.
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
NOTES
RM-SXV016J
REMOTE CONTROL
• Up to 32 characters are displayed as a group or file
name on the JPEG CONTROL display.
• The current Group and file number are also shown on
the display window in the following manner.
¶When the JPEG CONTROL display is shown
1 Make sure that the black (cursor) bar is in the
LPCM
-
VCDVD
GROUP TITLE TRACK CHAP
1
A B
MDOPELBGY 38
PROGRAM
left (Group) column.
DIGITAL
DTS
RANDOM
If it is in the right column, press 2to move it to the
left column.
Current Group
number
Current file
number
2 Use 5/∞to move the bar to a desired Group.
• Only JPEG files are shown on the display window.
On the right column, files in the selected Group are
shown.
When selecting a Group, file 1 is initially selected
(highlighted).
56
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
English
English
English
To zoom in/out the picture [ZOOM]
To see pictures continuously
[slide show mode]
JPEG
Available :
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
You can see files (still pictures) one after another
automatically in the slide show mode.
VOL
-
VOL+
ENTER
5/∞/2/3
CH
-
In this mode, each file (still picture) is shown on the TV
for approximately 3 seconds and then automatically
changed to the next file one after another.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW+
SLOW-
REPEAT SUB TITLE AUDIO
VFP
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
ZOOM +/–
3D
PHONIC
AMP VOL
To play back pictures from the
beginning of the disc
¶While JPEG picture is shown on the TV screen
1 Press ZOOM + or –.
JPEG
Available :
The unit zooms in by pressing ZOOM + or zooms
out by pressing ZOOM –.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
Each time you press ZOOM +, the magnification is
doubled (up to x 1024).
Each time you press ZOOM –, the magnification is
halved (down to x 1/8).
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
3
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
ZOOM x 4
¶After inserting a JPEG disc
1 Press 3.
The slide show starts from the beginning of the
disc.
At the top-left of the screen, the information for the
current magnification appears. While zoomed in,
the indication for the zoomed-in position, which
can be moved by operating the next step, appears
together.
NOTES
• To stop slide show playback (to dismiss the picture) in
the middle of the slide show playback:
Press 7 or MENU.
The TV screen returns to the JPEG CONTROL display.
Pressing 3resumes slide show playback from the last
picture you opened.
2 Use 5/∞/2/3to move the zoomed position.
• To keep showing a current picture during the slide show
Press 8or ENTER.
ZOOM x 4
The picture does not change to the next picture.
Pressing 3resumes the slide show playback from the
next picture.
• If a black screen appears continuously in the slide show
playback:
NOTES
The file currently played may be non-baseline JPEG file.
In this case, select a playable file (a baseline JPEG file)
again (e.g., pressing 7or MENU to open the JPEG
CONTROL display, etc.)
• Even in the slide show mode, you can zoom in or out a
picture while paused (see the next column).
• To return to normal screen:
Press ENTER.
Note that it may take a long time to select another file.
• While zoomed, the picture may look coarse.
• The zoom information on the screen will disappear if
you do not operate the zoom function for five seconds.
• The indication for the zoomed-in position appears again
when you press ZOOM +/–, or 5/∞/2/3.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
Direct selection
¶During playback or while stopped
Selecting the start point of the slide
show
1 Press TITLE/GROUP.
“--” is shown in the Group display area of the
JPEG
Available :
display window.
(Example for the indication of display window)
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
PROGRAM
Numeric
buttons
4
TV7
7
TV-/--
10
6
TV9
9
TV8
RANDOM
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
Group
display area
Current file
number
TITLE/GROUP
CH
+
5/∞
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
4/¢
2 Use the numeric buttons to specify a desired
SELECT
STROBE
Group number.
SLOW-
SLOW+
VFP
3
REPEAT SUB TITLE AUDIO
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
Examples:
To select 13: +10 → 3
To select 34: +10 → +10 → +10 → 4
To select 40: +10 → +10 → +10 → 10
From the JPEG CONTROL display
¶While JPEG CONTROL display is shown
Specify the Group number within several seconds
after pressing TITLE/GROUP (i.e. while the display
window shows “--” for the Group number, instead
of the current Group number).
1 Make sure that the black (cursor) bar is in the
left (Group) column.
If it is in the right column, press 2to move it to the
left column.
3 Use the numeric buttons to specify a desired
file number.
JPEG CONTROL
You can specify the file number according to the
order in the JPEG CONTROL display. You must
specify a file number within 5 seconds after
carrying out step 2.
Group : 01 / 10
File : 01 / 06 (Total 28)
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
orchard grass.jpg
petunia.jpg
north pole.jpg
The unit starts slide show playback from the
specified file. If you do not specify a file number,
the unit starts slide show playback from the first file
in the Group.
• You can skip a file in the slide show by using 4/¢ or
5/∞.
• You can select a file in the current group by using the
numeric buttons.
Group column
NOTES
2 Use 5/∞to move the bar to a desired Group.
• To stop slide show playback (to dismiss the picture) in
the middle of the slide show playback:
On the right column, files in the selected Group are
shown.
Press 7 or MENU.
When selecting a Group, file 1 is initially selected
(highlighted).
The TV screen returns to the JPEG CONTROL display.
Pressing 3resumes slide show playback from the last
picture you opened.
3 Use 4/¢to select a desired file.
• To keep showing a current picture during the slide show
Press 8or ENTER.
4 Press 3.
The picture does not change to the next picture.
The slide show starts from the specified file.
Pressing 3resumes the slide show playback from the
next picture.
• If a black screen appears continuously in the slide show
playback:
The file currently played may be non-baseline JPEG file.
In this case, select a playable file (a baseline JPEG file)
again (e.g., pressing 7or MENU to open the JPEG
CONTROL display, etc.).
Note that it may take a long time to select another file.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG disc playback
•
•
To stop repeat playback
English
English
English
Repeat function
Press 7. Note that the repeat mode remains.
To quit repeat playback
JPEG
Available :
During playback, press REPEAT as many times until
no repeat icon is shown on the display window.
While stopped, press REPEAT as many times until
repeat mode indication on the JPEG CONTROL
display goes off.
In the slide show mode, you can repeat playback of JPEG
files in a Group or on the disc.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL-
VOL+
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
REPEAT
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
¶While the JPEG CONTROL display is shown
1 Press REPEAT.
Pressing REPEAT switches the repeat mode.
If you press REPEAT while stopped, you need to
press 3to start repeat playback.
The mode is shown in the display window by icons,
while on the JPEG CONTROL display by mode
names, as follows.
JPEG
CONTROL
display
Display
Window
Function
REPEAT GROUP
REPEAT DISC
REPEAT ALL
All files in the current
Group are repeated.
All files on the current
disc are repeated.
All files/tracks on the
loaded discs are
repeated.
No indication
(TV Screen)
The repeat mode is off.
Selected repeat mode
JPEG CONTROL
Group : 01 / 10
REPEAT GROUP
File : 01 / 06 (Total 28)
spring
sumer
fall
winter
sea
mountain
camp
picnic
skiing
flower
begonia.jpg
german chamomile.jpg
kiwi fruit.jpg
orchard grass.jpg
petunia.jpg
north pole.jpg
(Display window)
LPCM
-
VCDVD
38
GROUP TITLE TRACK CHAP
1
A B
MPEG
DOLBY
DIGITAL
DTS
PROGRAM
RANDOM
Repeat mode indicator
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
NOTE
•
OTHERS
Make sure that the TV - DVD switch on
the remote control unit is set to “DVD”
when using the 5/∞/2/3and numeric
buttons for controlling the unit.
TV
DVD
OTHERS
RESUME
ON
ON SCREEN GUIDE
AUTO STANDBY
ON
OFF
DVD1
AV COMPULINK MODE
PARENTAL LOCK
Selecting preferences
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
This chapter refers to the settings which are already
made when you purchase the unit. Read this section
when you want to connect this machine to a wide-vision
TV set or change the settings according to the
environment you use this machine.
How to set preferences
TV
DVD
About the Preference display
The preference display consists of the LANGUAGE,
PICTURE, AUDIO, SPK.SETTING, and OTHERS setting
displays, each having setting items.
STANDBY/ON
OPEN/
CLOSE
DISC
TV
DVD
SELECT
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
ENTER
CH
+
VOL
-
VOL+
ENTER
5/∞/2/3
•
LANGUAGE
CH
-
CHOICE
¶While stopped
1 Press CHOICE.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
LANGUAGE
MENU LANGUAGE
ENGLISH
ENGLISH
OFF
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
ENGLISH
One of the Preference on-screen displays appears
on the TV screen.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
You can see five icons at the top right of the on-
screen display for the settings.
: Setting menu for language
: Setting menu for pictures
: Setting menu for sound
•
•
•
PICTURE
PICTURE
MONITOR TYPE
4:3 LB
PROGRESSIVE MODE
SCREEN SAVER
MP3/JPEG
AUTO
ON
: Setting menu for speakers
: Setting menu for the systems, etc.
MP3
2 Use 2/3to select the appropriate icon.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
The appropriate display appears on the TV screen.
3 Use 5/∞to move
edit by.
to the item you want to
AUDIO
AUDIO
The color of the selected item changes.
DIGITAL AUDIO OUTPUT
ANALOG OUT
D. RANGE COMPRESSION
STREAM/PCM
MULTI CHANNEL
AUTO
4 Press ENTER.
The pull-down menu appears over the selected
item.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
SPK.SETTING
ON SCREEN LANGUAGE
ENGLISH
ENGLISH
SPANISH
FRENCH
SPK.SETTING
MODE
5.1 CH.
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
SIZE
DELAY
LEVEL
Selected item
5 Use 5/∞to select from options and press
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ENTER.
The selected option is set.
• For details about each setting, see the following.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
NOTES
• To dismiss a preference display:
Press CHOICE.
• While an MP3 or JPEG disc is loaded, you cannot bring
up any preference display.
• When a preference display is shown on a wide TV
screen, the upper and lower parts of the TV picture
sometimes may be cut off. In such a case, adjust the
picture size control of the TV.
LANGUAGE page
This page allows you to select languages concerning with DVD AUDIO/DVD
VIDEO disc playback, as well as the on-screen display language of the unit.
LANGUAGE
MENU LANGUAGE
ENGLISH
ENGLISH
OFF
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
ENGLISH
NOTES
• During playback, you can bring up any page of the preference displays, however,
only “ON SCREEN LANGUAGE” can be set on the “LANGUAGE” page.
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu items
Setting options
Notes/examples
• If the selected language is not
recorded, the disc’s default
language is selected.
• For details about language code, see
“Table of languages and their
abbreviations” (see page 62).
MENU LANGUAGE
ENGLISH jSPANISH jFRENCH
jCHINESE jGERMAN j
ITALIAN jJAPANESE jlanguage
code from AA to ZU
You can select the default menu
language to be displayed if it is
contained on a DVD AUDIO/DVD
VIDEO disc.
AUDIO LANGUAGE
You can select the default audio
language to be played if it is
contained on a DVD AUDIO/DVD
VIDEO disc.
SUBTITLE
OFF jENGLISH jSPANISH j
FRENCH jCHINESE jGERMAN
jITALIAN jJAPANESE j
language code from AA to ZU
You can select the default subtitle
language to be displayed if it is
contained on a DVD AUDIO/DVD
VIDEO disc.
ON SCREEN LANGUAGE
IDIOMA EN PANTALLA
LANGUE D' ECRAN
ENGLISH
ESPAÑOL
FRANCAIS
ON SCREEN LANGUAGE
You can select the on-screen
display language of the unit.
ENGLISH jSPANISH jFRENCH
English
Spanish
French
• Some on-screen messages are
shown in English regardless of the
setting.
• You cannot change the on-screen
language shown on the MP3 and
JPEG CONTROL displays.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
Table of languages and their abbreviations
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
Afar
FA
FI
FJ
Persian
Finnish
Fiji
Faroese
Frisian
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
(Afan) Oromo
Oriya
Panjabi
SU
SV
SW
TA
TE
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance TI
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Irish
TG
TH
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
TK
TL
LV
MG
MI
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Twi
Ukrainian
Urdu
SK
SL
Uzbek
SM
SN
SO
SQ
SR
SS
ST
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
Javanese
Georgian
Kazakh
EO
ET
EU
Norwegian
Occitan
Siswati
Sesotho
Greenlandic
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
PICTURE page
This page allows you to select desired options concerning with a picture or
monitor screen.
PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVER
MP3/JPEG
4:3 LB
AUTO
ON
MP3
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu items
Setting options
Notes/examples
MONITOR TYPE
•
16:9 NORMAL (Wide Television
screen)
You can select the monitor type to
match your TV when you playback
DVD VIDEO discs recorded for wide
screen televisions.
Should be selected when you
connect the unit to a wide-screen
(16:9) TV whose aspect ratio is fixed
to 16:9 (the unit automatically
adjusts the screen width of the
output signal correctly when
playing back a “4:3” source).
• If you play back a “4:3” DVD VIDEO
source with the “16:9 NORMAL”
mode, the picture character slightly
changes due to the process for
converting the picture width.
•
•
16:9 AUTO (Wide Television screen)
Should be selected when you
connect a wide-screen (16:9) TV to
the unit.
4:3 LB (Letter Box Conversion)
Should be selected when you
connect a normal (4:3) TV to the
unit.
When playing back a DVD VIDEO
disc recorded by the wide picture
format, the picture is shown with
black bars at the top and bottom.
•
4:3 PS (Pan Scanning Conversion)
Should be selected when you
connect a normal (4:3) TV to the
unit.
When playing back a DVD VIDEO
disc recorded by the wide picture
format, the picture is automatically
zoomed and the left and right sides
are chopped off.
• With some discs recorded by the
wide picture format, the picture is
shown in the 4:3 LB mode even if
you select the 4:3 PS mode.
PROGRESSIVE MODE
•
•
•
VIDEO
• When progressive scanning mode is
active, the PROGRESSIVE indicator
is lit. Note that the color of indication
changes depending on this setting,
source type and the unit’s status.
(See pages 7 and 8.)
• Some DVD VIDEO discs may not be
played back correctly with the
“AUTO” mode. If the playback
picture is unclear or noisy with a
particular DVD VIDEO disc, try to
change the mode.
When the unit is in the progressive
scanning mode, you can select a
desired mode from three options.
Normally, set to “AUTO.”
Suitable for playing back a video
source disc.
FILM
Suitable for playing back a film or
progressive source disc.
AUTO
Used to play back a disc containing
both video and film source
materials.
The unit recognizes the picture type
(film or video source) of the current
disc according to the disc
information.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
Menu items
Setting options
Notes/examples
SCREEN SAVER
•
•
•
ON
• The screen saver function does not
work for still images during DVD
AUDIO playback.
You can select the screen saver
function ON or OFF.
See page 19 for details about screen
saver function.
The current picture gets dark.
OFF
The screen saver function is off.
• When a disc contains either MP3 or
JPEG files, the unit can play back the
files regardless of the setting.
MP3/JPEG
MP3
The unit can play back MP3 and
JPEG files recorded on a CD-R/CD-
RW disc, however, if a disc contains
both of MP3 and JPEG files, you can
only play back files of either type
selected by this menu item.
MP3 files can be played back if a disc
contains both of MP3 and JPEG files.
•
JPEG
JPEG files can be played back if a disc
contains both of MP3 and JPEG files.
AUDIO page
This page allows you to select desired options concerning with audio sound.
AUDIO
DIGITAL AUDIO OUTPUT
ANALOG OUT
STREAM/PCM
MULTI CHANNEL
AUTO
D. RANGE COMPRESSION
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu items
Setting options
Notes/examples
DIGITAL AUDIO OUTPUT
•
•
PCM ONLY
• When playing a DVD VIDEO or
Audio CD disc with DTS, use a DTS
decoder to get correct signals from
your speakers.
• With some DVD VIDEO discs that are
not fully copy-protected, a 20 or 24
bit digital signal may be output.
To connect the unit’s digital output to
an external device equipped with a
digital input, this item must be set
correctly.
See the table below for details
about the relation between the
setting and output signals.
Should be selected when you
connect the DIGITAL OUT jacks of
the unit to the linear PCM digital
input of other audio equipment.
DOLBY DIGITAL/PCM
Should be selected when you
connect the digital input of a Dolby
Digital decoder or an amplifier with
a built-in Dolby Digital decoder.
When this option is selected,
playing back a disc recorded by the
DTS or MPEG Multichannel format
outputs a linear PCM digital signal.
•
STREAM/PCM
Should be selected when you
connect the digital input of an
amplifier with a built-in DTS, MPEG
Multichannel or Dolby Digital
decoder, or the stand-alone unit of
such a decoder.
Digital output signal chart
Output
Playback discs
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
DVD with 48/44.1 kHz, 16/20/24
bit linear PCM
48/44.1 kHz,16 bit, stereo linear PCM
No output
DVD with 192/176.4/96/88.2 kHz,
16/22/24 bit linear PCM
DVD with DTS
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
DTS bitstream
DTS bitstream
DVD with Dolby Digital
Audio CD/Video CD/SVCD
Audio CD with DTS
Dolby Digital bitstream
44.1 kHz,16 bit, stereo linear PCM
44.1 kHz, 16 bit, stereo linear PCM
Linear PCM
CD-R/RW with MP3
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
Menu items
Setting options
Notes/examples
ANALOG OUT
•
•
2-CH DOLBY SURROUND
• This function does not work when
the 3D PHONIC function is activated
(see page 44).
• “2-CH DOLBY SURROUND” and
“2-CH STEREO” settings affect only
the output signal from the AUDIO
OUT jacks when playing back a DVD
VIDEO disc recorded with surround
multichannel audio.
• Some DVD AUDIO discs prohibit the
2-channel down-mix. For such a disc,
you cannot get the down-mixed
signal even if you set “ANALOG
OUT” to “2-DOLBY SURROUND” or
“2-CH STEREO.”
To play back a DVD VIDEO disc
recorded with surround
multichannel audio correctly, this
setting must be properly made
according to your audio system.
Should be selected when you enjoy
multichannel surround audio by
connecting the unit’s AUDIO OUT
jacks to a surround decoder.
2-CH STEREO
Should be selected when you enjoy
conventional 2-channel stereo
audio by connecting the unit’s
AUDIO OUT jacks to a stereo
amplifier/receiver or television set,
or when you duplicate audio of a
DVD VIDEO disc recorded with
surround audio to your MD,
cassette, etc.
•
MULTI CHANNEL
When you enjoy multichannel
surround audio by connecting the
unit’s 5.1-channel audio outputs to
an amplifier equipped with 5.1-
channel inputs.
D. RANGE COMPRESSION
When enjoying a DVD VIDEO disc
recorded with the Dolby Digital
format at low or middle volume,
this setting makes you hear sound
comfortably.
•
•
AUTO
• This function works only when
playing back a disc recorded with
Dolby Digital. The setting is not
effective for other discs.
• This function does not work when
the 3D PHONIC function is activated
(see page 44).
Audio is played back with the
dynamic range compressed.
ON
Audio is always played back with
the dynamic range compressed.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
SPK.SETTING page
This setting allows you to select desired options concerning with the speakers.
SPK.SETTING
MODE
SIZE
5.1 CH.
DELAY
LEVEL
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu items
Setting options
Notes/examples
MODE
•
•
5.1 CH.
• When selecting “5.1 CH.,” set
“ANALOG OUT” to “MULTI
CHANNEL” in the “AUDIO”
You can select the speaker
configuration type according to
your speaker systems. Normally,
set to “5.1 CH.”
When you connect to a 5.1-channel
amplifier and use the front, rear,
center and sub-woofer speakers.
preference display (see page 65).
• The Dolby Digital LEF (Low
Frequency Effect) signal is always
fed from the SUBWOOFER jack on
the rear panel of the unit regardless
of speaker setting.
• If you connect the unit’s digital
output to an external Dolby Digital
or DTS decoder (and set “DIGITAL
AUDIO OUTPUT” to “STREAM/
PCM” in the “AUDIO” preference
display), the speaker settings shown
left is not effective. Make the
speaker settings of the external
decoder properly.
EXPERT
When you want to make fine tuning
to match your speakers. The SIZE,
DELAY, and LEVEL setting items are
available.
SIZE
See page 68 for details about the
speaker size setting.
(SIZE display)
You can set the speaker sizes
according to your speakers.
SIZE
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
BASS REDIRECT
RETURN
LARGE
SMALL
SMALL
SUB WOOFER
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
• When playing back a DVD AUDIO
disc with either [CENTER SPEAKER]
or [REAR SPEAKER] set to [NONE],
their audio does not output from the
front speakers.
DELAY
See page 68 for details about the
speaker delay time setting.
(DELAY display)
You can set the speaker delay time
according to your speakers.
DELAY
CENTER SPEAKER
REAR SPEAKER
RETURN
0.0m/ 0ft
0.0m/ 0ft
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
LEVEL
See page 69 for details about the
speaker output level setting.
(LEVEL display)
You can set the speaker output level
according to your speakers.
LEVEL
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
SUB WOOFER
TEST TONE
0dB
0dB
0dB
0dB
OFF
RETURN
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
English
OTHERS page
This page allows you to select desired options concerning with the system.
OTHERS
RESUME
ON
ON SCREEN GUIDE
AUTO STANDBY
AV COMPULINK MODE
PARENTAL LOCK
ON
OFF
DVD1
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
Menu items
Setting options
Notes/examples
RESUME
•
ON
• See page 23 for details about
You can select the resume playback
mode.
resume playback function.
The unit can resume playback of the
disc from the position you
interrupted playback last time if it is
still on the disc tray.
•
•
OFF
The resume function is not active.
DISC RESUME
The unit can resume playback of
last 30 discs (the unit keeps
memory positions even if a disc is
removed from the disc tray).
ON SCREEN GUIDE
•
•
ON
• See page 19 about on-screen guide
icons.
• Examples of “on-screen guide”
The unit can display “on-screen
guide” icons or characters on the
picture, which show what is
happening to the disc or the unit.
The on-screen guide will be displayed.
OFF
icons or characters:
,
,
The on-screen guide will not be
displayed.
AUTO STANDBY
60 j30 jOFF
When the unit is stopped for more
than 30 minutes or 60 minutes, the
unit enters standby mode
automatically.
AV COMPULINK MODE
If you use the AV COMPU LINK
system, you must set this item
correctly.
DVD 1jDVD 2 jDVD 3
• See page 75 for details about AV
COMPU LINK function.
PARENTAL LOCK
(PARENTAL LOCK display)
See page 70 for details about the
Parental Lock setting.
When selecting this option,
pressing ENTER on the remote
control unit brings up the
“PARENTAL LOCK” display shown
right, in which you can restrict
playback of DVD VIDEO discs for
children.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
_ _ _ _
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
•
To return to the “SPK.SETTING” page
Use 5/∞to move
to [RETURN] and press ENTER.
Making fine tuning for your
speakers
You can make fine tuning to match your speaker system.
This adjustment is available only when “ANALOG OUT”
is set to “MULTI CHANNEL” in the “AUDIO” preference
display and “MODE” is set to “EXPERT” in the “SPK.
SETTING” preference display.
NOTES
• If you set the “FRONT SPEAKER” to “SMALL,” you
cannot set the other speakers to “LARGE.”
• When playing back a DVD AUDIO disc with either
[CENTER SPEAKER] or [REAR SPEAKER] set to [NONE],
their audio does not output from the front speakers.
BASS REDIRECT function
To set the speaker sizes
When you use the small speakers which do not fully
reproduce the low-frequency range, you can boost up
the low-frequency signal of the subwoofer or front
speakers.
You can set the speaker sizes according to your
speakers.
CLOSE
SELECT
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
1 Use 5/∞to select [BASS REDIRECT] and
TV8
8
TV-/--
10
TV0
0
MUTING
press ENTER.
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
5/∞
VOL
-
VOL+
2 Use 5/∞to select [SUB WOOFER] or [FRONT
ENTER
ENTER
CH
-
L/R] and press ENTER.
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SUB WOOFER: The low-frequency signal fed from
SLOW
-
SLOW+
VFP
the subwoofer output is boosted
up.
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
3D
FRONT L/R:
The low-frequency signals fed from
the front speaker outputs are
boosted up.
PHONIC
AMP VOL
¶While the “SPK.SETTING” page of the preference
display is shown
The “BASS REDIRECT” setting is effective only
when at least any one of the speaker sizes is set to
“SMALL.” If none of them is set to “SMALL,” this
setting is no activated.
1 Use 5/∞to move
to [SIZE] and press
ENTER.
The SIZE display page appears on the TV screen.
points to [FRONT SPEAKER].
(“NONE” appears in the setting field.)
Please note that the “FRONT L/R” setting is
effective only when playing back a Dolby Digital
encoded DVD VIDEO disc. If the front speaker size is
set to “SMALL,” the “BASS REDIRECT” setting is
fixed to “SUB WOOFER.”
See page 60 for details about how to bring up the
“SPK.SETTING” page.
SIZE
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
BASS REDIRECT
RETURN
LARGE
SMALL
SMALL
SUB WOOFER
To set the delay time
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
You can adjust the delay time of each speaker.
Selecting each speaker distance, which is on the basis of
the distance between the front speakers and the
listening position, sets an appropriate delay time. Check
that what the distance to each speaker is and set distance
values following the procedure.
2 Use 5/∞to select the speaker to be set and
press ENTER.
FRONT SPEAKER: Front speakers
CENTER SPEAKER: Center speaker
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
REAR SPEAKER:
Rear speakers
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
3 Use 5/∞to select the size and press ENTER.
8
TV0
0
MUTING
+10
LARGE: Large speaker(s) which can fully
reproduce the low-frequency range.
SMALL: Small speaker(s) which cannot fully
reproduce the low-frequency range.
NONE: No speaker(s) connected. This option is
only for “CENTER SPEAKER” and “REAR
SPEAKER.”
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
5/∞
VOL-
VOL+
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
¶While the “SPK.SETTING” page of the preference
display is shown
4 Repeat steps 2 and 3 if you set other
speakers.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
1 Use 5/∞to move
to [DELAY] and press
1 Use 5/∞to move
to [LEVEL] and press
English
ENTER.
ENTER.
The DELAY display page appears on the TV screen.
points to [CENTER SPEAKER].
The LEVEL display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 60 for details about how to bring up the
“SPK.SETTING” page.
See page 60 for details about how to bring up the
“SPK.SETTING” page.
DELAY
LEVEL
CENTER SPEAKER
REAR SPEAKER
RETURN
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
SUB WOOFER
TEST TONE
0.0m/ 0ft
0.0m/ 0ft
0dB
0dB
0dB
0dB
OFF
RETURN
SELECT
ENTER
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
2 Use 5/∞to select the speaker to be set and
2 Use 5/∞to select the speaker to be set and
press ENTER.
press ENTER.
CENTER SPEAKER:Center speaker
REAR SPEAKER: Rear speakers
FRONT SPEAKER: Front speakers (This item
cannot be selected. The level is
fixed to 0dB.)
3 Use 5/∞to select the delay time and press
CENTER SPEAKER: Center speaker
ENTER.
REAR SPEAKER:
SUB WOOFER:
Rear speakers
Subwoofer speaker
When you select “CENTER SPEAKER,” you can
select the delay time from “0.0m/0ft” to “1.5m/5ft”
in 1ft units.
When you select “REAR SPEAKER,” you can select
the delay time from “0.0m/0ft” to “4.5m/15ft” in 1ft
units.
3 Use 5/∞to set the level and press ENTER.
When you select “CENTER SPEAKER,” “REAR
SPEAKER” or “SUB WOOFER,” you can select the
level from –6 to 6dB in 1dB units.
4 Repeat steps 2 and 3 if you set other
4 Repeat steps 2 and 3 if you set other
speakers.
speakers.
•
To return to the “SPK.SETTING” page
•
To return to the “SPK. SETTING” page
Use 5/∞to move
to [RETURN] and press ENTER.
Use 5/∞to move
to [RETURN] and press ENTER.
NOTE
NOTE
• For the speaker(s) whose size is set to “NONE,” the
speaker level cannot be set.
• For the speaker(s) whose size is set to “NONE,” the
delay time cannot be set.
To generate test tone signals
You can check the level setting by monitoring the test
tone.
To set the speaker level
You can adjust the output level of each speaker.
1 Use 5/∞to select [TEST TONE] and press
TV
DVD
ENTER.
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
2 Use 5/∞to select [ON] and press ENTER.
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
8
The test tone will be generated when you select the
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
speaker(s) in the “LEVEL”display.
CH
+
5/∞
VOL
-
VOL+
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
¶While the “SPK.SETTING” page of the preference
display is shown
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
To set Parental Lock for the first time
[PARENTAL LOCK]
Limiting playback by
children
Available :
This function restricts playback of DVD VIDEO discs
which contain violent (and other) scenes according to the
level set by the user. For example, if a movie which
includes violent scenes supports the parental lock
feature, such scenes which you do not want to let
children view can be cut or replaced with other scenes.
When selecting “PARENTAL LOCK” in the “OTHERS”
page of the preference display (see page 67), pressing
ENTER on the remote control unit brings up the
PARENTAL LOCK sub-page shown below, in which you
can make setting for limiting playback.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
6
TV9
9
Numeric
buttons
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
VOL
-
VOL+
ENTER
5/∞
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
(OTHERS display)
DIGEST ANGLE
3D
PHONIC
AMP VOL
OTHERS
RESUME
ON
RM-SXV016J
REMOTE CONTROL
ON SCREEN GUIDE
AUTO STANDBY
AV COMPULINK MODE
PARENTAL LOCK
ON
60
DVD1
¶While the “OTHERS” page of the preference display is
shown
1 Use 5/∞to move
to [PARENTAL LOCK]
SELECT
ENTER
USE 5∞23TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
and press ENTER.
The Parental Lock on-screen display appears on the
TV screen.
Press ENTER.
(PARENTAL LOCK display)
points to [COUNTRY CODE].
See page 60 for details about how to bring up the
“OTHERS” page.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
_ _ _ _
2 While
points to [COUNTRY CODE], press
ENTER to bring up the pull-down menu.
3 Use 5/∞to select the country code.
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
The country code whose standards were applied to
rate the DVD VIDEO disc should be selected.
See “Appendix A: Country/Area code list for
Parental Lock” on page 80.
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
UG
UM
US
UY
UZ
VA
VC
NONE
_ _ _ _
SELECT
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ENTER
4 Press ENTER.
moves to [SET LEVEL].
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
5 While
points to [SET LEVEL], press ENTER
English
To change the settings
[PARENTAL LOCK]
to bring up the pull-down menu.
In the pull-down menu, “NONE” and level “1” to
“8” are available.
“NONE” does not restrict playback. Level “1” is the
strictest level. Discs rated higher than the selected
level are restricted.
Available :
You can change the Parental Lock settings later.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
TV1
1
TV2
TV3
3
NONE
2
TV5
5
8
7
6
5
4
3
NONE
_ _ _ _
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
Numeric
buttons
TV8
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
SELECT
ENTER
VOL
-
VOL+
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ENTER
5/∞
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
6 Use 5/∞to select a desired parental lock
level, then press ENTER.
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
moves to [PASSWORD].
3D
PHONIC
AMP VOL
RM-SXV016J
REMOTE CONTROL
7 Enter your 4-digit password using the numeric
buttons (0 to 9).
¶While the “OTHERS” page of the preference display is
shown
PARENTAL LOCK
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
1234
1 Use 5/∞to move
to [PARENTAL LOCK]
and press ENTER.
The Parental Lock on-screen display appears on the
TV screen.
...
SELECT
NEW PASSWORD? PRESS 0 ~ 9 KEY
ENTER
points to [PASSWORD].
See page 60 for details about how to bring up the
“OTHERS” page.
8 Press ENTER.
The setting is set.
moves to [EXIT].
PARENTAL LOCK
Pressing ENTER again returns to the “OTHERS”
page of the preference display.
COUNTRY CODE
SET LEVEL
PASSWORD
EXIT
US
NONE
_ _ _ _
• If you enter an undesired password in step 7, reenter the
password before pressing ENTER.
SELECT
ENTER
USE 5∞TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
2 Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [COUNTRY CODE] if you enter the
correct password.
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen, and you
cannot go to the next step.
NOTES
• If you enter the wrong password more than three times
in step 2 above,
moves to [EXIT] automatically and
5/∞does not work.
• If you forget your password in step 2
Enter “8888” The current password is deleted and you
can set a new password.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the initial settings
3 Press ENTER to bring up the pull-down menu.
To temporarily release the Parental
Lock [PARENTAL LOCK]
The country code whose standards were applied to
rate the DVD VIDEO disc should be selected.
See “Appendix A: Country/Area code list for
Parental Lock” on page 80.
Available :
Note that if you change the country code, you must
reselect the Parental Lock level.
When you set the parental level strictly, some discs may
not be played back at all. When you insert such a disc
and try to play it, the following Parental Lock on-screen
display appears on the TV screen, asking you whether
you want the Parental Lock to be temporarily released or
not.
4 Press ENTER.
moves to [SET LEVEL].
5 Press ENTER to bring up the pull-down menu.
In the pull-down menu, “NONE” and level “1” to
“8” are available.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
SELECT
TV
DVD
TV1
1
TV2
TV3
3
2
TV5
5
“NONE” does not restrict playback. Level “1” is the
strictest level. Discs rated higher than the selected
level are restricted.
TV4
TV6
4
TV7
7
6
TV9
9
Numeric
buttons
TV8
8
TV-/--
10
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
RETURN
PAGE
CH
+
5/∞
VOL
-
VOL+
6 Use 5/∞to select a desired parental lock
level, then press ENTER.
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
moves to [PASSWORD].
SLOW
-
SLOW+
VFP
REPEAT SUB TITLE AUDIO
7 Enter a 4-digit password using the numeric
fs/Rate PROGRESSIVE
SCAN
ZOOM
DIGEST ANGLE
3D
PHONIC
AMP VOL
buttons (0 to 9).
The password entered in the above step becomes
the new password. If you do not change the
RM-SXV016J
REMOTE CONTROL
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
1 Use 5/∞to move
to [TEMPORARY
RELEASE], then press ENTER.
moves to the [PASSWORD].
When selecting [NOT RELEASE], press 0OPEN/
CLOSE to remove the disc.
8 Press ENTER.
moves to [EXIT].
Pressing ENTER again returns to the “OTHERS”
page of the preference display.
PARENTAL LOCK
TEMPORARY RELEASE
NOT RELEASE
PASSWORD
_ _ _ _
SELECT
ENTER
TEMPORARY RELEASE
2 Enter your 4-digit password using the numeric
buttons (0 to 9).
The Parental Lock is released, and the unit starts
playback.
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen.
Enter the correct password.
3 Press ENTER.
NOTE
• When you enter the wrong password more than three
times in step 2 above,
moves to [NOT RELEASE]
automatically and 5/∞does not work. In such cases,
press ENTER.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Names of parts and controls
Refer to the corresponding pages indicated in () for details.
Front panel
1
2
3
4
5
6
7 8 90
OPEN/CLOSE
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
6
DISC
7
EXCHANGE
DISC SKIP
0
PLAY
STANDBY/ON
3
STANDBY/ON
STOP PAUSE
7
8
7
-
DISC
4
¢
SKIP
PLAY
&
EXCHANGE
DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER
DVD AUDIO
PROGRESSIVE
-
=
~
!
@
1 STANDBY/ON indicator (11, 14)
9 0OPEN/CLOSE button (17, 22, 23)
0 8PAUSE button (20, 26)
2 STANDBY/ON
button (14)
3 Disc tray carousel (17, 22, 23)
- Remote sensor (12)
4 DISC 1-7 buttons/indicators (14, 17, 19)
5 EXCHANGE button/indicator (17, 20)
6 DISC SKIP button (17, 20)
= DVD AUDIO indicator (17)
~ PROGRESSIVE indicator (7, 8, 63)
! Display windows (see the illustration below)
@ 4/¢SKIP buttons (24, 26)
7 7STOP button (20, 22, 51)
8 3PLAY button (19, 23)
Display window
1
2
3
4
5
6
LPCM
MPEG
DOLBY
DIGITAL
DTS
-
GROUP TITLE TRACK CHAP
1
A B ANGLE
VCDVD
38
PROGRAM
RANDOM
7
8
1 Audio format indicators
2 Disc indicator
5 Repeat mode indicators (37, 53, 59)
6 ANGLE indicator
3 3(play)/8(pause) indicators
7 PROGRAM/RANDOM indicators (35, 36)
8 Multi-information window
4 Group/title/track/chapter indicators
Rear panel
1
2
3 4
5
6
7
8
AUDIO OUT
1
CENTER SUBWOOFER
DIGITAL OUT
PCM / STREAM
VIDEO OUT
AV COMPU LINK
AC IN
REAR
VIDEO
LEFT
RIGHT
COAXIAL OPTICAL
COMPONENT
FRONT
RIGHT LEFT
Y
PB
PR
S-VIDEO
1 DIGITAL OUT jacks (OPTICAL/COAXIAL) (10)
4 VIDEO OUT - S-VIDEO jack (6)
2 AUDIO OUT jacks (FRONT RIGHT/FRONT LEFT/
SUBWOOFER/CENTER/REAR RIGHT/REAR LEFT)
(6, 7, 9, 10)
5 VIDEO OUT - COMPONENT jacks (Y/PB/PR) (7)
6 AV COMPU LINK jacks (75)
7
AC IN connector (11)
3 VIDEO OUT - VIDEO jack (6)
8 Region code label (4)
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Remote control unit
^
&
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DISC
*
(
TV
DVD
SELECT
1
2
TV1
1
TV2
TV3
3
2
TV5
5
TV4
TV6
4
TV7
7
TV-/--
10
6
TV9
9
TV8
3
8
TV0
0
MUTING
+10
TITLE/
GROUP
TV/VIDEO
CANCEL
)
_
4
5
6
7
8
RETURN
PAGE
CH
+
+
¡
VOL-
VOL+
ENTER
™
CH
-
9
0
PREVIOUS
CLEAR
NEXT
£
¢
SELECT
STROBE
-
=
~
SLOW
-
SLOW+
VFP
§&
§
¶
REPEAT SUB TITLE AUDIO
!
@
#
fs/Rate PROGRESSIVE
SCAN
DIGEST ANGLE
ZOOM
•
ª
3D
PHONIC
AMP VOL
$
%
RM-SXV016J
REMOTE CONTROL
1 OPEN/CLOSE button (17, 18, 22, 23)
2 DISC SELECT button (17, 19)
3 Numeric buttons
$ 3D PHONIC button (44)
% ANGLE button (28, 41, 42)
^ Infrared signal-emitting window (12)
& TV - DVD switch (13, 14, 29, 51, 55, 60)
4 RETURN button (31)
5 PAGE button (33)
* TV STANDBY/ON
( DVD STANDBY/ON
button (13)
button (14)
6 TOP MENU button (30, 31)
7 Cursor selection (5Up, ∞Down) -
CH (+/–) buttons (13)
) TV/VIDEO - CANCEL button (13, 29, 35)
_ TITLE/GROUP button (31, 53, 58)
+ MENU button (30)
8 Cursor selection (2Left, 3Right) -
VOL (+/–) buttons (13)
¡ ENTER button
9 CHOICE button (15, 60)
ON SCREEN button (27, 31, 35, 36, 38, 46)
™
0 4/PREVIOUS button (24, 26, 51, 56)
- 7/CLEAR button (20, 22, 36, 51)
= 3/SELECT button (19, 21, 23, 30, 36, 51, 57)
~ 1/SLOW– button (26)
£ ¢/NEXT button (24, 26, 51, 56)
¢ 8/STROBE button (20, 26, 42, 51)
§& ¡/SLOW+ button (26)
AUDIO-fs/Rate button (40, 45, 54)
VFP - PROGRESSIVE SCAN button (8, 43)
ZOOM +/– buttons (43, 57)
§
¶
! REPEAT button (37, 53, 59)
@ SUBTITLE button (39)
•
ª
# DIGEST button (32)
AMP VOL +/– buttons (13)
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest
operation. If your video/audio player (such as a DVD player, CD player and VCR) and
television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied
with the JVC AV COMPU LINK cable(s), when you simply starting the player, all the
necessary settings of the television and/or amplifier/receiver for enjoying playback are
automatically performed.
To AV COMPU LINK
(II, EX or III)
Connection and setup
Using the AV COMPU LINK cable, connect the AV
COMPU LINK terminals of each component to one
another.
TV
Receiver
To AV COMPU LINK
The unit
• The unit’s AV COMPU LINK setting is operated in the
OTHERS page in the preference display. See page 67
for operation.
• For information on the connection between the TV and
the receiver, refer to the receiver’s Instructions.
• If you connect the unit to a television and receiver via
AV COMPU LINK, set the unit’s AV COMPU LINK
setting to DVD1.
IMPORTANT!
To AV COMPU LINK (II, EX or III)
• When you make video connection between the unit and
another device (such as a receiver and TV) via the
composite, S-video or component jacks, as well as AV
COMPU LINK connection, see also the instruction
manual of the other device.
TV
The unit
Notes for connection
• If you connect the unit to a receiver via AV COMPU LINK
in a system including a Dolby Digital decoder, some
functions may not be performed automatically.
• If you connect the unit to a television via AV COMPU
LINK, set the unit’s AV COMPU LINK setting as follows.
• When connecting to VIDEO-1 input terminal of
the television: DVD2
• When connecting to VIDEO-2 input terminal of
the television: DVD3
• Connect the AUDIO OUT jacks of the unit to the audio
input jacks of a receiver that indicating “DVD.”
Otherwise, the system will not work correctly.
• There may be no description about connections to the
unit in the instruction manual of a television or VCR.
However a television or VCR with AV COMPU LINK
terminals indicating “II,” “EX” or “III” can be connected
to the unit.
To AV COMPU LINK
(II, EX or III)
TV
The unit
To AV COMPU LINK
VCR
Operation
You can enjoy pictures and/or sound by just putting a
source component (which plays back the pictures and/or
sound such as a DVD player or VCR) into play mode. You
do not have to operate the TV and receiver including not
having to perform power switching.
• If you connect the unit to a television and VCR via AV
COMPU LINK, set the VCR’s Remote Control Code and
the unit’s AV COMPU LINK setting as follows.
1 Turn on the main power of the television.
• When connecting to VIDEO-1 input terminal of
the television:
The unit’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
• When connecting to VIDEO-2 input terminal of
the television:
The unit’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
2 Insert a disc (or tape) into the source
component.
3 Press 3of the source component.
The following actions are performed automatically:
• Turning on the power for the television.
• Setting the source of the television to the external
input (VIDEO-1 or VIDEO-2).
• Turning on the power for the receiver.
• Setting the source of the receiver to the component
which has started playback.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
POWER
Symptom
Possible cause
Remedy
Power does not come on.
Power plug is not inserted securely.
Plug in securely.
OPERATION
Symptom
Possible cause
Remedy
The remote control unit does not work.
Too far from the unit.
More closer to the unit.
The tip of the remote control unit is not
pointed in the right direction.
Point the infrared light- emitting window
toward the remote sensor on the front
panel (see page 12).
Batteries are exhausted.
Replace the batteries with new ones.
Battery polarity is incorrect.
Take out the batteries and insert them again
in the correct direction.
The remote control unit is not set for
operating your TV.
Set the remote control unit for operating
your TV (see page 13).
The TV/VIDEO - CANCEL, 5/∞/2/3 or
numeric buttons do not work.
The TV - DVD switch is not correctly set.
To control the unit, set the TV - DVD switch
to “DVD.” To control your TV, set the TV -
DVD switch to “TV” (see page 13).
Operation is not possible.
Microcomputer malfunction due to
lightning or static electricity.
Turn off the power and unplug the power
cord, then connect the power cord again.
Moisture condensation caused by a sudden Turn off the power, then turn it on a few
change of temperature or humidity.
hours later.
The disc does not allow the operation.
Or a non-playable disc is loaded.
Check and replace the disc (see page 4).
The disc tray carousel does not move.
The system malfunctions.
An alien substance is jammed on the
carousel.
Press 7or turn off the power.
When using the TITLE/GROUP button to
select a title during DVD VIDEO playback,
appears on the TV screen and the title
cannot be selected.
The disc does not allow the operation
because of disc contents.
Try to press 7and select a title using the
numeric buttons on the remote control
unit.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
PICTURE
Symptom
Possible cause
Remedy
No picture is displayed on the monitor.
Connection of video cable is incorrect.
Connect the cable correctly.
Select correctly.
Input selection of TV is incorrect.
Disc is not playable.
Use a playable disc (see page 4).
No picture is displayed on the monitor or
the screen is blurred or divided into two
parts.
The Progressive scanning mode is set to
ON though the unit is connected to a TV via (see page 8).
the VIDEO OUT jack.
Set the Progressive scanning mode to OFF
A picture is noisy or blurred.
The unit is connected to a VCR directly and Connect the unit so that the picture signal
the copyguard function is activated.
flows directly to the TV.
With some discs, a picture may be blurred
when setting “PROGRESSIVE MODE” to
“FILM” or “AUTO.”
Set “PROGRESSIVE MODE” to “VIDEO”
(see page 63).
A picture does not fit the television screen.
“MONITOR TYPE” is not correctly set.
Television is not correctly set.
Select monitor type correctly (see page 63).
Set the television correctly.
The upper and lower parts of the
preference display are cut off when using
wide-aspect TV.
It depends on the setting on the TV.
Adjust the TV screen using the control on
the TV.
AUDIO
Symptom
Possible cause
Connection is incorrect.
Remedy
Check the connection.
Select correctly.
No audio is reproduced.
Input selection of amplifier is incorrect.
Audio volume is low when playing back the The audio level recorded on a DVD VIDEO
Turn up the volume of the TV or amplifier/
receiver.
unit, compared with the TV or VCR.
is lower, compared with TV broadcasting.
Note that you should turn down the volume
before switching back to TV broadcasting,
to prevent outputting the sudden big
sound.
Sound is distorted or noise is generated.
Disc is dirty.
Wipe the disc surface (see page 5).
“MULTI CH” is shown in the display
window when playing back a DVD AUDIO
disc.
The track is prohibited from down-mixing
to 2-channel stereo audio.
Listen in multichannel surround audio.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Frequently Asked Questions
Question
Answer
Ref. page
4
Can I play back DVD VIDEO and Video CD purchased
abroad?
You can play back the DVD VIDEO discs with the Region
Code (local code) containing “ALL” or “1” recorded in
the NTSC or PAL system (PAL disc signals are
reproduced by converting to the NTSC system). You can
also play back the Video CD discs recorded in the NTSC
system. Please check the information on each disc jacket.
Can I play back a DVD VIDEO disc without any Region
Code number?
The Region code indicates the conformity of the disc to
the standards.
Any DVD VIDEO not conforming to the standards cannot
be played back.
4
4
Can I play back a CD-R/RW disc with still pictures in other
than the JPEG format?
No, you cannot play back that disc.
Can I play back audio on a disc labeled “Dolby Digital
EX”?
Yes, you can play back the disc because Dolby Digital EX
is compatible with Dolby Digital. However, to get the
maximum performance of Dolby Digital EX, we
recommend to connect the DIGITAL OUT jack to a
decoder or amplifier/receiver with built-in decoder that
supports Dolby Digital EX. In this case, set “DIGITAL
AUDIO OUTPUT” on the “AUDIO” preference display to
“STREAM/PCM.”
64
64
Can I play back audio on a disc labeled “DTS ES”?
Is there any difference in the playback settings between
Discrete and Matrix recording systems for DTS ES?
Though you cannot enjoy audio using the analog audio
outputs (AUDIO OUT), you can enjoy DTS ES audio by
connecting the DIGITAL OUT jack to a decoder or
amplifier/receiver with built-in decoder that supports
DTS ES. In this case, set “DIGITAL AUDIO OUTPUT” on
the “AUDIO” preference display to “STREAM/PCM.”
Can this unit play back a disc labeled “THX”?
What does “THX” mean?
Yes you can. “THX” is a name of the original standard for
high quality picture/audio recording and playback
established by Lucasfilm Ltd. A disc labeled “THX” is
certified that it passed this standard.
When files of the MP3 and Audio CD formats are
recorded on a same disc, can the unit play back files of
both formats?
The disc is of the data CD format, therefore, the unit can
play back only files of the MP3 format.
4, 51
Some Dolby Digital discs contain 5.1-ch Surround or
Dolby Surround audio data. What is the difference
between these two types?
Both are surround sound standards developed by Dolby
Laboratories Inc. in the U.S.A.
Dolby Surround records 2-channel surround audio
information are recorded onto the analog stereo (left and
right) channels together with front stereo audio
information. When played back, the surround signals are
separated by a Dolby Surround or Dolby Pro Logic
decoder.
4
Dolby Digital digitally encodes and records up to six
channel information for left, right, center, rear left, rear
right and LFE (Low-Frequency Effect for Sub-woofer etc.).
When played back, a Dolby Digital decoder decodes data
and outputs signals separately.
Generally, Dolby Digital sounds better.
When playing back a DVD VIDEO or Video CD disc,
something like mosaic appears on the TV screen. Is this
because of a malfunction of the unit?
It is a block noise specific to a motion picture recorded in
digital, and is not a malfunction of the unit.
The unit does not function as described in this
Instruction Manual.
The operation of this unit may occasionally be
unacceptable due to the intention of the disc contents
creator and/or structural restrictions.
Can I record DVD VIDEO data on a video tape?
Can this unit record data?
Most of all DVD VIDEO discs are copy-protected so that
you cannot record DVD VIDEO data onto any video tape.
3
No, you cannot.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Specifications
*Specifications and appearance subject to change without prior notice.
General
Readable discs:
DVD AUDIO, DVD VIDEO, DVD-R (Video format), SVCD, Video CD, Audio CD (CD-DA), MP3
Format, JPEG, CD-R/RW (CD-DA, SVCD, Video CD, MP3 Format, JPEG)
NTSC, 480i (Interlaced scan)/480p (Progressive scan) selectable
Video format:
Other
Power requirements:
Power consumption:
Mass:
AC 120 V
, 60 Hz
18 W (POWER ON), 2.7 W (STANDBY mode)
5.6 kg (12.4 lbs)
Dimensions (W x H x D):
435 mm x 102 mm x 448 mm
(17-3/16 inch x 4-1/16 inch x 17-11/16 inch)
Video outputs
COMPONENT (pin jacks):
Y Output:
1.0 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
PB/PR Output:
1.0 Vp-p (75 Ω)
Y Output:
C Output:
500 Lines or more
VIDEO OUT (pin jack):
S-VIDEO OUT (S jack):
1.0 Vp-p (75 Ω)
286 mVp-p (75 Ω)
Horizontal resolution:
Audio outputs
ANALOG OUT (pin jack):
DIGITAL OUT: (COAXIAL):
(OPTICAL):
2.0 Vrms (10 kΩ)
0.5 Vp-p (75 Ω termination)
–21 dBm to –15 dBm (peak)
Audio characteristics
Frequency response:
CD
(sampling frequency 44.1 kHz):
2 Hz to 20 kHz
2 Hz to 22 kHz
DVD (sampling frequency 48 kHz):
(2 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)
DVD (sampling frequency 96kHz/88.2 kHz): 2 Hz to 44 kHz
DVD (sampling frequency 192kHz/176.4 kHz):2 Hz to 88 kHz
16 bit: More than 98 dB
Dynamic range:
20/24 bit: More than 108 dB
Wow and flutter:
Unmeasurable (less than 0.002%)
Total harmonic distortion:
16 bit: Less than 0.0018%
20/24 bit: Less than 0.0012%
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Appendix A: Country/Area code list for Parental Lock
This list is used for the Parental Lock operation. For details, see page 70.
ES Spain
ET Ethiopia
LB Lebanon
LC Saint Lucia
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
SE Sweden
SG Singapore
SH Saint Helena
AD Andorra
AE United Arab Emirates
AF Afghanistan
FI
FJ
Finland
Fiji
LI
Liechtenstein
AG Antigua and Barbuda
LK Sri Lanka
LR Liberia
LS Lesotho
FK Falkland Islands
FM Micronesia
(Federated States of)
FO Faroe Islands
FR France
FX France, Metropolitan
GA Gabon
GB United Kingdom
GD Grenada
AI
Anguilla
AL Albania
AM Armenia
LT
Lithuania
SI
Slovenia
AN Netherlands Antilles
AO Angola
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
LU Luxembourg
SJ Svalbard and Jan
Mayen
SK Slovakia
SL Sierra Leone
SM San Marino
SN Senegal
LV
LY
Latvia
Libyan Arab
MA Morocco
MC Monaco
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
MM Myanmar
MN Mongolia
MO Macau
MP Northern Mariana
Islands
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
GE Georgia
GF French Guiana
GH Ghana
AU Australia
AW Aruba
SO Somalia
SR Suriname
ST Sao Tome and Principe
SV El Salvador
SY Syrian Arab Republic
SZ Swaziland
TC Turks and Caicos
Islands
TD Chad
TF French Southern
Territories
AZ Azerbaijan
BA Bosnia and Herzegovina
BB Barbados
BD Bangladesh
BE Belgium
BF Burkina Faso
BG Bulgaria
BH Bahrain
GI
Gibraltar
GL Greenland
GM Gambia
GN Guinea
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
GS South Georgia and the
South Sandwich
GT Guatemala
GU Guam
BI
Burundi
BJ Benin
TG Togo
TH Thailand
BM Bermuda
BN Brunei Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
CC Cocos (Keeling) Islands
CF Central African
Republic
CG Congo
CH Switzerland
MU Mauritius
MV Maldives
MW Malawi
TJ
Tajikistan
GW Guinea-Bissau
GY Guyana
TK Tokelau
TM Turkmenistan
TN Tunisia
TO Tonga
TP East Timor
TR Turkey
TT Trinidad and Tobago
TV Tuvalu
TW Taiwan
HK Hong Kong
HM Heard Island and
McDonald Islands
HN Honduras
HR Croatia
MX Mexico
MY Malaysia
MZ Mozambique
NA Namibia
NC New Caledonia
NE Niger
HT Haiti
HU Hungary
NF Norfolk Island
NG Nigeria
ID
IE
IL
Indonesia
Ireland
Israel
TZ Tanzania, United
Republic of
UA Ukraine
NI
Nicaragua
NL Netherlands
NO Norway
NP Nepal
NR Nauru
NU Niue
NZ New Zealand
OM Oman
PA Panama
PE Peru
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
PL Poland
PM Saint Pierre and
Miquelon
PN Pitcairn
PR Puerto Rico
PT Portugal
PW Palau
PY Paraguay
QA Qatar
RE Réunion
RO Romania
RU Russian Federation
RW Rwanda
IN
IO
India
UG Uganda
British Indian Ocean
Territory
UM United States Minor
Outlying Islands
US United States
UY Uruguay
UZ Uzbekistan
VA Vatican City State
(Holy See)
VC Saint Vincent and the
Grenadines
VE Venezuela
CI
Cô te d'Ivoire
IQ
IR
Iraq
CK Cook Islands
CL Chile
CM Cameroon
CN China
CO Colombia
CR Costa Rica
CU Cuba
CV Cape Verde
CX Christmas Island
CY Cyprus
CZ Czech Republic
DE Germany
DJ Djibouti
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
Iran (Islamic Republic
of)
IS
IT
Iceland
Italy
JM Jamaica
JO Jordan
JP Japan
KE Kenya
KG Kyrgyzstan
KH Cambodia
VG Virgin Islands (British)
VI
Virgin Islands (U.S.)
VN Vietnam
VU Vanuatu
WF Wallis and Futuna
Islands
WS Samoa
YE Yemen
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
ZR Zaire
KI
Kiribati
KM Comoros
KN Saint Kitts and Nevis
KP Korea, Democratic
People's Republic of
KR Korea, Republic of
KW Kuwait
KY Cayman Islands
KZ Kazakhstan
LA Lao People’s
EC Ecuador
EE Estonia
EG Egypt
EH Western Sahara
ER Eritrea
ZW Zimbabwe
Democratic Republic
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Appendix B: Glossary
480i/480p
DTS
Indicates the number of scanning lines and scanning
format of an image signal. 480i indicates 480 scanning
lines with interlaced format, and 480p indicates 480
scanning lines with progressive format.
A Digital Surround audio encoding format configured
with six (5.1) channels, similar to Dolby Digital. It
requires a decoder, either in the player or in an
external receiver. DTS stands for Digital Theater
Systems.
Aspect ratio
Not all DTS discs contain six (5.1) channel
information.
A ratio which defines the shape of the rectangular
picture in a TV. It is the width of the picture relative to
the height. The conventional TV picture is 4:3 in
aspect ratio.
Dynamic range
The difference between the loudest and softest
sounds.
Bitstream
The digital form of multichannel audio data (e.g., 5.1-
channel) before it is decoded into its various channels.
Dynamic range compression
The dynamic range compression (DRC) reduces the
dynamic range so that you can turn down the volume
to avoid disturbing others yet still hear the detail of
quiet passages.
Channel, CH
Stereo or multichannel audio consists of “channel”
signals. “Stereo” audio consists of left and right
channels, while 5.1-channel Dolby Digital consists of
six channels (front left, front right, rear left, rear right,
center and LFE (Low-Frequency Effect) channel for
sub-woofer, etc.).
Extension
Several letters at the end of a file name. File name
extensions usually follow a period and indicate the
type of information stored in the file.
Chapter
Finalize
The smallest division on DVD VIDEO. It is a division of
a title and similar to a track for Audio CD or Video CD.
When conducting multisession recording, this means
the closing of a session (fixing) by indicating the
halting of writing so as to prevent the addition of any
more sessions.
Component video
Video signals with three channels of separate
information that makes up the picture. There are
some types of component video, such as R/G/B and Y/
CB(PB)/CR(PR).
Fs
See “Sampling frequency.”
Group
Composite video
The largest division on DVD AUDIO.
A single video signal commonly used in most
consumer video products that contains all luminance,
color, and synchronization information.
ID3 tag
The tag embedded in an MP3 file indicating what
songs, artists, and album they comes from. You can
edit these tags.
Dolby Digital (AC3)
A six-channel system consisting of left, center, right,
left rear, right rear and LFE (Low-Frequency Effect
channel for sub-woofer, etc.) channels. All processing
is done in the digital domain.
Not all Dolby Digital discs contain six (5.1) channel
information.
Interlaced scan
In the conventional video system, a picture is shown
on the display monitor in two halves. The Interlaced
scanning system places lines of the second half of the
picture in-between lines of the first half of the picture.
Dolby Surround/Dolby Prologic
ISO 9660 Format
Dolby Surround is a five-channel system consisting of
left, center, right and left rear, right rear channels. All
processing is done in the digital domain.
The most common international standard for the
logical format for files and directories on a CD-ROM.
Dolby Prologic is a four-channel system consisting of
left, center, right and rear channel (the single rear
channel is usually played through two speakers).
JPEG
A popular file format for still image compression.
JPEG stands for Joint Photographic Experts Group.
There are three sub-types of the JPEG format as
follows.
Down-mix
Internal stereo mix of multichannel surround audio by
a DVD player. The down-mix signals are output from
stereo output connectors.
• baseline JPEG:
used for digital cameras, web,
etc.
• progressive JPEG: used for web.
• lossless JPEG: an old type and rarely used
now.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Letter box
PBC
PBC stands for “Playback control” and is a method of
A type of picture playback with the normal (4:3) TV
screen. Black bars are shown at the top and bottom of
the image to allow playing of wide-screen (16:9) DVD
movie without cutting off any sides of the image on a
4:3 TV.
controlling disc play for Video CDs (VCD). You are able
to interact with the disc through menus.
Progressive scan
Progressive scanning displays all the horizontal lines
of a picture at one time, as a single frame. A
progressive-scanning DVD player converts the
interlaced (480i) video from DVD into progressive
(480p) format for connection to a progressive display.
It dramatically increases the vertical resolution.
Linear PCM audio
Stands for “pulse code modulation.” Linear PCM is
the usual digital method without compression, used
for audio playback of DVD Video discs, Audio CD
discs, etc.
Menu
Region code
Most DVD AUDIO, DVD VIDEO or SVCD/Video CD
discs provide a menu, through which users can select
a desired playback material, condition, etc.
Code identifying a geographic region of compatibility
for a DVD.
Sampling frequency
MLP
The rate at which measurements of an audio signal
are taken during A/D and D/A conversion. The
measure is samples per second.
MLP stands for “Meridian Lossless Packing.” A
lossless audio compression system that can
completely recreate the PCM signal.
Surround
MP3
An audio system with more than two (left and right)
channels, usually including rear channels, etc.
MP3 is an audio data reduction format, which stands
for MPEG-1 Audio Layer 3. Using MP3, you can
achieve a data reduction of about 1:10.
S-video
A video signal which improves picture quality over
standard composite connections. Used on Super VHS,
DVD, high end TV monitors, etc.
MPEG
A family of Standards for compressing audio-visual
information. “MPEG” standards include MPEG-1,
MPEG-2 and MPEG-4. Video CD and MP3 are based on
MPEG-1, while DVD is based on MPEG-2. MPEG
stands for Moving Picture coding Experts Group.
Title
The largest division on DVD VIDEO.
Track
Multisession
The smallest division on DVD AUDIO, SVCD, Video CD
and Audio CD discs.
A method of adding data to a CD-R/CD-RW in more
than one recording session using the Track-At-Once
method.
Transfer rate
The rate of transferring digital data. Usually the
measure is in baud per second. The DVD system
applies variable transfer rate system for high
efficiency.
NTSC (National television system committee)
A black & white and color television system format
used in U.S.A., Canada, Mexico and Japan.
Packet Writing
A method of writing data on a CD-R/CD-RW in small
increments. Packets can be of fixed or variable length.
PAL (Phase Alternation by Line)
A color television system format used extensively in
Western Europe.
Pan scanning
A type of picture playback with the normal (4:3) TV
screen, which is panned and zoomed across the wider
movie picture, chopping off the left and right sides.
Parental lock
A DVD function that prevents undesired viewing by
children depending on disc contents. You need a
password to play back a locked disc in the normal
condition. Otherwise, undesirable scenes are
automatically skipped or replaced with other pictures.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Appendix C: Index
Monitor type.............................................................. 15, 63, 77
MP3............................................................ 4, 51, 52, 53, 55, 64
MP3 CONTROL.......................................................... 52, 53, 61
MP3 disc ................................................................ 3, 23, 51, 61
MPEG......................................................................... 16, 51, 64
Multi-angle part .............................................................. 41, 49
Multiple session.............................................................. 51, 55
Numerics
3D PHONIC ................................................................ 44, 45, 65
A
A-B repeat....................................................... 38, 39, 47, 48, 49
Angle..................................................................... 19, 41, 42, 49
Audio language.............................................. 19, 40, 48, 49, 61
Auto standby......................................................................... 67
AV COMPU LINK................................................. 7, 9, 10, 67, 75
AV COMPULINK mode ......................................................... 67
N
NTSC............................................................................... 4, 7, 79
O
B
One touch replay function.................................................... 21
On-screen guide............................................................... 19, 67
On-screen language ....................................................... 15, 61
Opening display......................................................... 14, 16, 18
Bonus group...................................................................... 5, 34
C
Chapter .................... 5, 21, 24, 25, 27, 30, 32, 33, 37, 38, 39, 48
Chapter search ...................................................................... 48
Component video .................................................... 2, 7, 75, 79
Copyguard system.................................................................. 3
Copy-protected disc................................................................ 6
Country code............................................................. 70, 72, 80
P
Packet writing.................................................................. 51, 55
PAL........................................................................................... 4
Pan scanning......................................................................... 63
Parental lock................................................... 67, 70, 71, 72, 80
Playback control (PBC) ............ 5, 23, 24, 25, 30, 31, 32, 37, 38
Preference ......................... 9, 10, 15, 16, 19, 22, 23, 39, 40, 41,
43, 51, 55, 60, 61, 70, 71, 72, 75
D
D. range compression ..................................................... 10, 65
Digest............................................................................... 32, 33
Digital audio output............................................... 4, 10, 16, 64
Direct selection ..................................................................... 53
Disc resume......................................................... 20, 22, 23, 67
Dolby.................................................................................. 3, 75
Dolby Digital................................... 4, 10, 16, 45, 64, 65, 75, 79
DTS ............................................................... 3, 4, 10, 16, 64, 79
DVD menu ............................................................................. 30
DVD PLAYER SET UP............................................................. 15
Program (playback)......................................... 35, 36, 37, 47, 50
Progressive mode........................................................... 63, 77
Progressive scanning ........................................ 7, 8, 43, 63, 77
R
Random (playback).................................................... 36, 47, 50
Region code ................................................................. 4, 14, 18
Repeat (playback).......................... 37, 38, 39, 47, 48, 49, 53, 59
Resume (playback).............................................. 20, 22, 23, 67
E
S
Extension......................................................................... 51, 55
Sampling rate.......................................................................... 4
Scanning mode........................................................ 7, 8, 63, 77
Screen saver............................................................... 19, 55, 64
Slide show........................................................................ 57, 58
Slide show mode............................................................. 57, 59
Slide show playback........................................................ 57, 58
Slow-motion............................................................... 19, 26, 28
Status bar .......................... 27, 28, 36, 39, 40, 41, 46, 47, 48, 49
Strobe (playback).................................................................. 42
Subtitle language................................................. 19, 39, 40, 49
S-video............................................................................ 6, 7, 79
F
Finalize......................................................................... 4, 51, 55
G
Group.............................................. 5, 24, 25, 27, 30, 31, 35, 37,
47, 51, 52, 53, 55, 56, 58, 59
I
ID3 tag.................................................................................... 51
Initial setting............................................................... 15, 16, 60
Initial setup............................................................................. 15
Interlaced scanning ............................................................. 7, 8
ISO 9660 .......................................................................... 51, 55
T
Time search.................................................... 31, 32, 47, 48, 50
Transfer rate..................................................................... 27, 51
Transport status ............................................................... 27, 28
J
JPEG .................................................... 4, 51, 55, 56, 59, 61, 64
JPEG CONTROL ................................................... 56, 57, 58, 59
JPEG disc.................................................... 3, 23, 55, 56, 57, 61
V
VFP (Video fine prosessor)......................................... 8, 43, 44
L
Z
Language code...................................................................... 61
Linear PCM........................................................................ 4, 64
Zoom (playback) ............................................................. 43, 57
M
Macrovision............................................................................. 3
Manufacturer code ................................................................ 13
Menu........................................ 5, 15, 18, 19, 25, 30, 31, 47, 48,
49, 60, 61, 63, 64, 65, 67, 70, 71, 72
Menu bar ..................................... 28, 31, 32, 35, 36, 37, 38, 39,
40, 41, 42, 46, 47, 48, 49
Menu language..................................................................... 61
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Authorized Service Centers
®
QUALITY
SERVICE
HOW TO LOCATE YOUR J VC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51005-5
(0301)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
CONSUMER VIDEO 1-90
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS
LABOR
1 YR
90 DAYS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. :
Serial No. :
Purchase data :
Name of dealer :
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
J
V
C
0502YIYMDWJEM
EN.
Download from Www.Somanuals.com. All Manuals Search And Download.
|