DVD VIDEO PLAYER
Introduction
2
XV-C3SL
Preliminary knowledge
Getting started
5
13
21
25
40
45
52
Basic operations
Advanced operations
MP3 disc playback
Initial settings
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
TV
10
MUTING
+10
TV/VIDEO
CANCEL
RETURN
CH
+
VOL
VOL
+
ENTER
CH
STANDBY
PREVIOUS
NEXT
STROBE
CLEAR
SELECT
STANDBY/ON
SLOW
PLAY
SLOW
+
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
AMP VOL
+
XV-C3
RM-SXV004A
REMOTE CONTROL
Additional information
For Customer Use:
INSTRUCTIONS
Enter below the Model No. and Serial
No. which are located on the rear, bottom
or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No
LET0213-001A
[B]
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
English
Table of Contents
Special picture playback......................................... 29
Introduction
Page 2
To advance a still picture frame-by-frame............29
To display continuous still pictures [STROBE].....29
To playback in slow-motion [SLOW].....................30
To zoom a scene [ZOOM].......................................30
Changing the playback order ................................. 31
Features.......................................................................2
Supplied accessories..................................................2
About this instruction manual..................................3
Notes on handling......................................................4
To playback in the desired order [PROGRAM] .....31
To playback in random order [RANDOM]............32
Repeat playback ...................................................... 32
Preliminary knowledge
Page 5
Names of parts and controls.....................................5
To repeat the current selection or all tracks
[REPEAT]...............................................................32
To repeat a desired part [A-B REPEAT].................33
Selecting a scene angle of DVD VIDEO................. 34
Front panel................................................................. 5
Display window......................................................... 5
Remote control unit .................................................. 6
Rear panel.................................................................. 8
Operational Principles................................................9
To select a scene angle from the normal screen
[ANGLE]................................................................34
To select a scene angle from the angle list
On-screen displays.................................................... 9
To prevent the monitor from burning out
display [ANGLE]...................................................35
Changing the language and sound........................ 35
[SCREEN SAVER]................................................. 10
On-screen guide icons............................................ 11
How to use numeric buttons.................................. 11
About discs...............................................................12
Playable disc types.................................................. 12
Disc structure........................................................... 12
To select the subtitle language [SUBTITLE] .........35
To change the audio language or sound
[AUDIO].................................................................36
Selecting the picture character.............................. 37
To select the picture character
[THEATER POSITION]..........................................37
Enjoying virtual surround sound ........................... 37
To simulate surround sound [3D PHONIC]...........37
Checking the status................................................. 38
Getting started
Page 13
Connections..............................................................13
Before making any connections ............................ 13
To connect to a TV .................................................. 13
To connect to a TV with the SCART connector .... 15
To connect to an audio amplifier or receiver........ 16
To connect to audio equipment
To check the disc/time information .......................38
To check the DVD function status..........................39
To dim the brightness of the display window...... 39
Dimning brightness of the display window..........39
with a digital input............................................... 16
To connect the power cord .................................... 17
To install batteries in the remote control unit ......18
MP3 disc playback
Page 40
About MP3 disc........................................................ 40
Unavailable functions ............................................. 40
To use the remote control unit for TV operation ....19
Basic operations...................................................... 41
Basic operations using the basic control buttons...41
Track/Group selection using the numeric buttons ...41
Advanced functions................................................. 42
Program playback ...................................................42
Random playback....................................................43
Repeat playback ......................................................43
Disc/time information .............................................44
Basic operations
Page 21
Setting TV-DVD switch to DVD..............................21
Turning on/off the unit............................................21
Inserting and removing discs..................................22
Basic playback..........................................................22
To start playback..................................................... 22
To stop playback completely ................................. 23
To stop playback temporarily ................................ 23
To advance or reverse playback rapidly
Initial settings
Page 45
while monitoring.................................................. 23
To locate the beginning of the scene or song ...... 23
Resuming playback..................................................24
Selecting preferences.............................................. 45
How to set preferences...........................................45
LANGUAGE page....................................................45
AUDIO page.............................................................46
DISPLAY page .........................................................48
SYSTEM page..........................................................49
Limiting playback by children................................ 49
To memorize the interrupted position .................. 24
To resume playback................................................ 24
Advanced operations
Page 25
To set Parental Lock for the first time
Playing from a specific position on a disc..............25
To locate a desired scene from the DVD menu.... 25
To locate a desired scene from the menu of
[PARENTAL LOCK]...............................................49
To change the settings [PARENTAL LOCK] .........50
To temporarily release the Parental lock
the Video CD/SVCD with PBC ............................. 25
To locate a desired selection using the numeric
buttons.................................................................. 26
To locate a desired selection using 4 or ¢ .... 26
To locate a desired scene by specifying the
[PARENTAL LOCK] ..............................................51
Additional information
Page 52
Care and handling of discs ..................................... 52
Troubleshooting...................................................... 53
Specifications........................................................... 55
Appendix A : Table of languages and their
chapter number [CHAP.SEARCH]....................... 27
To locate a desired position in the current title
or track [TIME SEARCH] ...................................... 27
To locate a desired scene from the display
abbreviations........................................................ 56
Appendix B : Country/Area code list for
parental lock ......................................................... 57
[DIGEST] ............................................................... 28
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Features
Supplied accessories
• Audio/video cable (x 1)
Picture functions
I Strobe function
The unit can display nine continuous still pictures
on the TV screen.
I Digest function
• Remote Control Unit (x 1)
You can select the desired selection to be played
from the opening scenes displayed on the TV
screen.
O
C
P
E
S
L
O
N
/
E
T
V
1
1
T
T
V
V
S
4
T
4
T
A
N
T
V
V
T
D
7
V
D
V
7
2
B
Y
T
2
3
D
/O
10 V
V
N
T
D
V
R
5
D
E
5
T
T
U
V
T
V
R
8
N
8
3
T
O
VO
P
M
V
T
V
T
E
0
N
U
C
0
6
6
L
T
V
H
9
M
9
C
U
T
I Angle function*
You can select a desired angle from multiple
camera angles recorded on the DVD VIDEO disc.
H
+
I
T
N
G
O
V/V10
C
AN
I
E
C
N
E
L
PR
E
T
C
O
CH
E
EVIO
US
M
R
E
N
C
L
E
VOL
U
A
R
SLO
S
W
E
L
P
E
M
L
A
C
N
E
D
I
T
O
S
P
Y
T
D
L
A
Y
X
E
D
S
IG
SUB TITLE
T
E
R
O
ST
B
P
3D
E
H
A
N
SLO
O
A
U
D
N
G
IC
W
LE
+
IO
T
HE
P
O
AT
S
IT
E
R
N
IO
Z
A
O
O
M
P
M
R
REM
VO
M
OT
-SX
E
COV0
L
+
04A
TROL
N
I Zoom function
You can view scenes close-up.
I Parental lock*
• R6P(SUM-3)/AA(15F) batteries (x 2)
You can restrict the playback of DVD VIDEO discs
with scenes which you do not want children to
see, such as adult or violent films.
I Theater position
You can select the picture character according to
the lighting of your room.
Audio functions
I High quality digital sound
You can enjoy high quality sound with Dolby
Digital or Linear-PCM.
I Surround function*
The unit accommodates the Dolby Digital, DTS
and MPEG multichannel surround systems.
(These surround signals are output only from the
DIGITAL OUT jacks.)
I 3D PHONIC function
You can enjoy surround sound with your 2-channel
system.
Other functions
I Multi-language subtitles and sound*
You can select a subtitle or sound language from
those recorded on the DVD VIDEO disc.
I Multi-disc playback
You can enjoy Audio CD, Video CD and SVCD
discs as well as DVD VIDEO discs.
In addition, you can also enjoy MP3 discs.
I Operation from the on-screen display
User-friendly on-screen displays allow you to
operate the unit easily.
Functions with (*) mark only work on a DVD VIDEO
disc that is compatible with each function.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
English
About this instruction manual
• This instruction manual basically explains operations according to the format as below.
• For operations for MP3 discs, see “MP3 disc playback” on and after page 40. The other sections of this
manual do not refer to MP3 discs playback.
To playback in random order
[RANDOM]
You can play titles or tracks on a disc inserted in
random order by using the Random function.
operation can be
These symbols
indicate the types
of discs which the
used for.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV4
4
TV2
2
TV5
5
TV3
3
TV6
6
TV7
7
TV8
8
TV0
0
TV9
9
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
3
+
VOL
VOL
ENTER
CH
PREVIOUS
CLEAR
NEXT
STROBE
The number
indicates the
SELECT
2
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
following procedural
step(s) in which the
button(s) is(are)
used.
1
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
You may also use the
corresponding
buttons on the front
panel of the unit if
available.
7While stopped
1 Press PLAY MODE.
The play mode menu appears on the TV
screen.
The number
indicates the
procedural step.
2 Use CURSOR 2/3to move
to
[RANDOM].
REPEAT
PROGRAM
RANDOM
The names of buttons
on the remote control
unit (or on the front
panel of the unit) are
all given in uppercase
letters.
3 Press ENTER.
The unit starts random playback.
The “RANDOM” indicator appears in the
display window on the front panel. After
playing all titles/tracks of the discs, random
playback ends.
Other convenient
procedures, etc.
•
The same title or track will not be played back
more than once during random play.
•
To stop/quit random playback in the middle
Press 7to stop playback. The unit is still in
random playback mode, so pressing 3starts
random playback again.
To quit random playback, press 7again while
stopped. The “RANDOM” indicator in the display
window turns off.
NOTE
Some DVD VIDEO discs may not be played
back correctly in the random mode.
Additional
supplemental
remarks.
•
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Notes on handling
Important cautions
Installation of the unit
Safety precautions
Avoid moisture, water and dust
• Select a place which is level, dry and neither too
hot nor too cold (between 5oC and 35oC).
• Leave sufficient distance between the unit and the
TV.
• Do not use the player in a place subject to
vibrations.
Do not place the unit in moist or dusty places.
Avoid high temperatures
Do not expose the unit to direct sunlight or place it
nearby a heating device.
When you are away
Power cord
When you are away on travel or otherwise for an
extended period of time, remove the plug from the
wall outlet.
• Do not handle the power cord with wet hands!
• A small amount of power* is always consumed
while the power cord is connected to the wall
outlet.
Do not insert foreign objects into the unit
Do not insert wires, hairpins, coins, etc. into the
unit.
• When unplugging the player from the wall outlet,
always pull the plug, not the power cord.
* :For power consumption in standby mode, see
“Specifications” on page 55.
Do not block the vents
Blocking the vents may damage the unit.
To prevent malfunction of the unit
• There are no user-serviceable parts inside.
If anything goes wrong, unplug the power cord
and consult your dealer.
• Do not insert any metallic object into the unit.
• Do not use any non-standard shape disc available
on the market, because it may damage the unit.
• Do not use a disc with tape, seals, or paste on it,
because damage to the unit may result.
Care of the cabinet
When cleaning the unit, use a soft cloth and follow
the relevant instructions on the use of chemically-
coated cloths. Do not use benzene, thinner or other
organic solvents and disinfectants. These may
cause deformation or discoloring.
If water gets inside the unit
Turn off the power switch and remove the plug from
the wall outlet, then call the store where you made
your purchase. Using the unit in this state may
cause a fire or electrical shock.
Note about copyright laws
• Please check the copyright laws in your country
before recording from DVD VIDEO, Audio CD,
Video CD, SVCD and MP3 discs. Recording of
copyrighted material may infringe copyright laws.
Note about the copyguard system
• The DVD VIDEO disc is protected by the
copyguard system. When you connect the unit to
your VCR directly, the copyguard system activates
and the picture may not be played back correctly.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works.
© 1992-1997 Dolby Laboratories, Inc. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-
wide patents issued and pending. “DTS”and “DTS Digital Surround” are trademarks of Digital Theater
Systems, Inc.
Copyright 1996 Digital Theater Systems, Inc. All rights reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
English
Names of parts and controls
Refer to the corresponding pages indicated in ( ) for details.
Front panel
5
1
2
6
3
4
STANDBY
STANDBY/ON
7
9
0
-
8
7Remote sensor
Receives signals from the remote control unit.
8Display window (below)
Indicates the current status of the unit.
97(STOP) button (23, 41)
Stops playback.
03(PLAY) button (22, 41)
Starts playback. Also, used as a SELECT button for
PBC of Video CDs/SVCDs.
-8(PAUSE) button (23, 41)
Pauses playback. Also, used to display nine
continuous still pictures (STROBE function).
1STANDBY/ON
button (21)
Turns the unit on or off (standby).
2STANDBY indicator
Lights when the power cord is connected and the
unit is on standby. When the unit is turned on, the
STANDBY indicator goes off.
3Disc tray (22)
Used to load a disc.
4LED
Lights up when the unit is turned on and goes out
when the unit is turned off (standby).
50(OPEN/CLOSE) button (22)
Used to open and close the disc tray.
64/¢(SKIP) buttons (23, 41)
Used to skip a chapter, title or track. Also, used for the
page selection of a menu screen (for Video CD/SVCD).
Holding down 4or ¢during playback reverses
or advances playback rapidly (except MP3).
Display window
1
2
3
-
VCDVD
GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
4
5
1Disc indicator
4PROGRAM/RANDOM indicators
Indicates the type of the disc set in the disc tray. When
a DVD VIDEO disc is set, “DVD” lights up. When a
SVCD or Video CD disc is set, “VCD” lights up. When
an Audio CD or MP3 disc is set, “CD” lights up.
2Group/title/track/chapter indicators
Displays group/title/track, or chapter number.
3Repeat mode indicators
The appropriate indicator illuminates while the unit
is in the Program or Random playback mode.
5Multi-information window
Displays the current group/title/track/chapter
number(s), time and status information.
The appropriate indicator illuminates according to
the current repeat mode.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Remote control unit
#
$
%
TV
DVD
1
STANDBY/ON
TV
OPEN/
CLOSE
DVD
^
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
2
3
TV7
TV8
TV9
7
8
9
TV
10
TV0
0
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
&
CH
+
4
5
*
(
+
VOL
VOL
ENTER
6
)
CH
7
8
PREVIOUS
NEXT
_
CLEAR
SELECT
STROBE
+
¡
™
9
0
+
SLOW
PLAY
SLOW
THEATER
MODE SUB TITLE AUDIO POSITION
-
=
~
£
¢
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
!
@
§
RM-SXV004A
REMOTE CONTROL
1OPEN/CLOSE button (22)
Opens and closes the disc tray.
2Numeric buttons (11, 19)
5CURSOR (5Up, ∞Down) - CH (+/–) buttons
When the TV - DVD switch is set to DVD, these
buttons are used to select an item from a menu or
on-screen display, or to change the setting of an
on-screen display item.
In this case, we call them “CURSOR 5/∞” buttons in
this manual.
When the TV - DVD switch is set to TV, they are used
to select a TV channel.
6CURSOR (2Left, 3Right) - VOL (+/–) buttons
When the TV - DVD switch is set to DVD, these
buttons are used to select an item from a menu or
on-screen display, or to change the setting of an on-
screen display item.
When the TV - DVD switch is set to DVD, these
buttons are used to specify a title, chapter, track or
group number.
Also used to enter a time for the Time search and a
chapter number for the Chapter search.
When the TV - DVD switch is set to TV, these buttons
are used to select a TV channel as well as mute the
TV audio.
3RETURN button (26)
Returns to the previous menu (for DVD VIDEO/Video
CD/SVCD).
In this case, we call them “CURSOR 2/3” buttons in
this manual.
When the TV - DVD switch is set to TV, they are used
to change the TV audio volume.
4TOP MENU button (25)
Displays the top menu of a DVD VIDEO disc on the
TV screen.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
English
7CHOICE button (45)
Displays the preference on-screen display on the TV
screen.
&TV/VIDEO - CANCEL button (19)
Switches the TV input mode when the TV - DVD
switch is set to TV.
Cancels the last selection of the program when the
TV - DVD switch is set to DVD.
*MENU button (25)
Displays a DVD menu on the TV screen.
(ENTER button
Executes the selected item in a menu or on-screen
display.
84/PREVIOUS button (23, 26, 41)
Skips back a chapter, title, track. Also used for the
page selection of a menu screen (for DVD VIDEO/
Video CD/SVCD).
Holding down this button during playback reverses
playback rapidly (except MP3 disc).
97/CLEAR button (23, 31, 41)
Stops playback. Also used to clear all the
programmed selection for the program play.
01/SLOW– button (23, 30, 41)
Pressing this button during playback reverses
playback rapidly (except MP3 disc).
With an MP3 disc, pressing this button skips back a
Group.
)DISPLAY button (38, 39)
Displays the status information (only for DVD disc)
or the time information (for any types of discs).
_¢/NEXT button (23, 26, 41)
Skips forward a chapter, title, or track. Also used for
the page selection of a menu screen (for DVD VIDEO/
Video CD/SVCD).
Pressing this button while a DVD VIDEO disc is
paused reverses playback slowly.
-PLAY MODE button (27, 31, 32, 33, 42, 43)
Displays an on-screen display, for controlling the
advanced playback functions.
Holding down this button during playback advances
playback rapidly (except MP3 disc).
+8/STROBE button (23, 29, 30, 41)
Pauses playback. Also, used to display nine
continuous still pictures (STROBE function).
Pressing this button while paused advances the still
picture frame-by-frame.
¡3/SELECT button (22, 25, 41, 42)
Starts playback. Also used as a SELECT button for
PBC of Video CD/SVCDs.
=SUBTITLE button (35)
Used to display the subtitle selection display on the
TV screen, as well as used to turn the subtitle on or
off (for DVD VIDEO/SVCD).
~DIGEST button (28)
Displays beginning scenes of each title, chapter or
track on the TV screen (for DVD VIDEO/Video CD/
SVCD).
!3D PHONIC button (37)
Produces a simulated surround effect.
@ANGLE button (34, 35)
Changes camera angles during playback of a DVD
VIDEO disc containing multiple camera angles (for
DVD VIDEO).
#Infrared signal-emitting window
Point this window toward the remote sensor on the
front panel when pressing buttons.
¡/SLOW+ button (23, 30, 41)
Pressing this button during playback advances
playback rapidly (except MP3 disc).
With an MP3 disc, pressing this button skips forward
a Group.
Pressing this button while a DVD VIDEO, Video CD
disc, or SVCD is paused advances playback slowly.
£THEATER POSITION button (37)
Selects a picture character from 4 positions (for DVD
VIDEO/Video CD/SVCD).
¢AUDIO button (36)
Selects the audio (for DVD VIDEO/Video CD/SVCD).
$TV STANDBY/ON
Turns the TV on or off (standby).
%TV - DVD switch (19, 21)
button (19, 20)
ZOOM button (30)
Zooms in the picture (for DVD VIDEO/Video CD/
SVCD).
When setting this switch to “TV,” the numeric,
cursor and TV/VIDEO - CANCEL buttons are used to
control your TV.
When setting it to “DVD,” these buttons are used to
control the unit.
§AMP VOL +/- button
Amplifier volume up/down button for an external
amplifier. Effective only for a JVC’s Receiver.
^DVD STANDBY/ON
button (21)
Turns the unit on or off (standby).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Rear panel
1
2
RIGHT
LEFT
AUDIO OUT
DIGITAL OUT
PCM STREAM
VIDEO OUT
COMP.
RGB
S-VIDEO
AV COMPU LINK
S-VIDEO VIDEO
AV
AND VIDEO
Y
C
RGB
2
COAIAL
3
4
5
6
7
8
9
1AUDIO OUT jacks (LEFT/RIGHT) (13, 16)
Outputs stereo analog audio signals.
2AC power cord (17)
3DIGITAL OUT PCM/STREAM jack (COAXIAL) (16)
Outputs digital audio signals. You must select the
signal type correctly according to the external device
connected to via the Preference setting display.
6VIDEO jack (13)
Outputs a composite video signal.
7VIDEO OUT SELECT switches (14, 15 )
You can select the video signal type by the COMP./
RGB-Y/C switch and the RGB/S-VIDEO AND VIDEO
switch.
8AV COMPU LINK jacks
These jacks are provided for use in the future. They
are currently not used.
4VIDEO OUT AV-connector (15)
The standard 21-pin SCART connector outputs video
and audio signals. See “To connect to a TV with the
SCART connector” on page 15 for details.
9Region Code label (12)
Shows Region Code number.
5S-VIDEO jack (13)
Outputs S-video signals.
Note that this jack does not feed correct signals when
you make the unit feed the RGB signals. See “To
connect to a TV with the SCART connector” on page 15
for details.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
English
Operational Principles
On-screen displays
The unit provides several on-screen displays.
With some displays, you can set or select
preferences or functions, while the others
are display only.
Opening displays
The Opening display appears automatically
in some conditions.
Opening display
At the bottom, the following information are
indicated depending on the unit’s status.
• NOW READING: The unit is now reading
the disc information (TOC).
DVD/Super VCD/Video CD/CD PLAYER
DVD/Super VCD/Video CD/CD PLAYER
• REGION CODE ERROR!: The DVD VIDEO
disc loaded cannot be played because the
region code of the disc does not match the
unit.
• OPEN: The disc tray is now opening.
• CLOSE: The disc tray is now closing.
NOW READING
Preference displays
LANGUAGE
AUDIO
When no disk is inserted or when a DVD
VIDEO or Video CD disk is inserted and
stopped, pressing the CHOICE button brings
up the preference display for setting the
preferences.
AUDIO
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
LANGUAGE
ENGLISH
STREAM / PCM
MENU LANGUAGE
DIGITAL AUDIO OUTPUT
DOWN MIX
ENGLISH
ENGLISH
ENGLISH
Lo / Ro
ON
AUDIO LANGUAGE
SUBTITLE
COMPRESSION
ON SCREEN LANGUAGE
EXIT
EXIT
There are four pages: LANGUAGE, AUDIO,
DISPLAY and SYSTEM as shown on the
right.
PRESS
KEY
PRESS
KEY
See page 45 for detailed information.
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
LANGUAGE
4:3 LB
MODE 2
ON
OFF
OFF
MONITOR TYPE
AUTO STANDBY
RESUME
AV COMPULINK MODE
SCREEN SAVER
DVD 1
ON SCREEN GUIDE
EXIT
EXIT
PRESS
KEY
PRESS
KEY
PARENTAL LOCK display
PARENTAL LOCK
When no disc is inserted or a DVD VIDEO
disc is stopped, pressing the ENTER button
while holding down the 7button brings up
the PARENTAL LOCK display in which you
can set the level for limiting playback.
See page 49 for detailed information.
PARENTAL LOCK
GB
——
- - - -
Country Code
Set Level
PASSWORD
EXIT
PRESS
KEY
ENTER
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
Play mode displays
Pressing the PLAY MODE button brings up the
play mode display in which you can control
playback functions.
During DVD VIDEO playback
While stopped
DVD CONTROL
REPEAT
PROGRAM
RANDOM
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
Different displays appear depending on the
disc type and the unit’s status.
During Audio CD/MP3 disc
playback
During Video CD/SVCD
playback
CD CONTROL
VCD CONTROL
REPEAT A-B REPEAT TIME SEARCH
REPEAT A-B REPEAT TIME SEARCH PBC CALL
DVD VIDEO function status
Disc/time (DVD VIDEO)
Status displays
Pressing the DISPLAY button during playback
brings up the status display.
1 / 2
1 / 2
1 / 2
Mbps
TITLE
1
CHAP.
25
TIME
2:25:25
BITRATE
3.3
ENGLISH ENGLISH
For a DVD VIDEO disc, pressing the DISPLAY
button toggles between the DVD VIDEO
function status display, the disc/time display
and off.
For a Video CD, SVCD, Audio CD or MP3 disc,
pressing the DISPLAY button switches the
disc/time display on and off.
Disc/time (Audio CD/Video
CD/SVCD without PBC)
Disc/time
(Video CD/SVCD with PBC)
TRACK 1TIME 00:08
TRACK
1
TIME
25:25 PBC
EACH
Disc/time (MP3 disc)
MP3 GROUP 1 TRACK 11 EACH 00:08 BITRATE 128kbps
To prevent the monitor from burning out [SCREEN SAVER]
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the unit
automatically activates the screen saver function if a static
picture, such as an on-screen display or menu, is displayed
for over 5 minutes.
DVD/Super VCD/Video CD/CD PLAYER
• Pressing any button on the unit or the remote control
unit will release the screen saver function and return to
the previous display.
• You can select one of several screen saver modes
available (see page 48).
• The screen saver function is not activated during Audio
CD playback or after stopping Audio CD playback. Also, it
is not activated during MP3 disc playback.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
English
On-screen guide icons
During DVD VIDEO playback, you may see icons displayed over the picture. These
have the following meanings.
:
Displayed at the beginning of a scene recorded from multiple angles.
(See page 34.)
:
Displayed at the beginning of a scene recorded with multiple audio languages.
(See page 36.)
:
Displayed at the beginning of a scene recorded with multiple subtitle
languages. (See page 35.)
You can set the unit not to display on-screen icons above via the preference
settings described on page 48.
About invalid operation icon
When you press a button, if the unit does not accept its operation,
your television screen. Operations are occasionally unacceptable even if
not displayed.
appears on
is
Note that some operations may not be accepted. For example, some discs may
not allow rapid advance/reverse or slow-motion playback.
How to use numeric buttons
To select a track/title number
• To select a number between 1 and 10
Press the corresponding button for the number.
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
• To select a number higher than 10
Use the +10 button.
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
Examples:
To select 13
To select 34
To select 40
+10 → 3
+10 → +10 → +10 → 4
+10 → +10 → +10 → 10
To enter a time or chapter number
The method for entering a time for Time search or chapter number for Chapter
search is different from above. See the corresponding sections in this manual for
the details.
*
There is another method for selecting a track or group of an MP3 disc. See the
appropriate section.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Preliminary knowledge
About discs
Playable disc types
Playable and non-playable disc types are as follows:
Playable discs
DVD VIDEO
SVCD
Video CD
Audio CD
The DVD VIDEO Logo is a trademark.
• CD-R and CD-RW discs recorded with SVCD, Video CD, Audio CD or MP3 format can be played back, though
some may not be played back because of the disc characteristics or recording condition. Note that the CD-R
and CD-RW that are not finalized cannot be played back.
• DVD VIDEO players and DVD discs have their own Region Code numbers. This unit only can play back DVD
VIDEO discs whose Region Code numbers include “2.”
Examples of playable DVD VIDEO discs:
1 2
3 4
1 2 3
4 5 6
ALL
2 5
2
Non-playable discs
DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, DVD+RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G,
CD-TEXT, SACD
• Playing back discs listed as “Non-playable discs” above may generate noise and damage speakers.
• This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs.
Disc structure
A DVD VIDEO disc is comprised of “titles,” while an Audio CD, Video CD or SVCD is comprised of “tracks.”
Each title may be divided into some “chapters.” For example, if a DVD VIDEO disc contains some movies,
each movie may have its own title number, and each movie may be divided into some chapters. In a DVD
VIDEO karaoke disc, each song usually has its own title number and does not have chapters. In general, each
title has independent content, while each chapter in the same title has continuity.
For the MP3 disc structure, see page 40.
(Example: DVD VIDEO disc)
Title 1
Title 2
Chapter 1
Chapter 2
Chapter 3
Chapter 1
Chapter 2
(Example: Audio CD/Video CD/SVCD)
Track 1
Track 2
Track 3
Track 4
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
English
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the
audio outputs to your separate audio equipment. (See the following pages.)
The unit
RIGHT
LEFT
AUDIO OUT
DIGITL OUT
PCM TREAM
VIDEO OUT
COMP.
RGB
S-VIDEO
AV COMPU LINK
S-VIDEO VIDEO
AV
AND VIDEO
Y
C
RGB
2
COAXL
S-video cable
(not supplied)
TV
IN
White
Yellow
Red
S-VIDEO
VIDEO
Yellow
White
LEFT
AUDIO
RIGHT
Audio/Video cable
(supplied)
Red
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which
converts stereo audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video
cable (optional) in addition to the (standard) video connection to get better picture quality.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Enabling the S-VIDEO output or the VIDEO output
For your TV connection, you can use either the S-VIDEO output or the VIDEO
output. (You cannot use both outputs at a time.)
S-VIDEO
AND VIDEO
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (S-
VIDEO AND VIDEO/RGB) switch on the rear panel to “S-VIDEO AND VIDEO.” Then,
“S-VIDEO” appears on the display window for a few seconds. Note that these
outputs have no relationship to the setting of the Y/C-COMP./RGB switch.
RGB
(Display Window)
-
VCDVD GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
IMPORTANT!
• Note that you must change the switch position while the unit is stopped or the unit power is off (on
standby) with the DVD removed. Otherwise, the changed setting is not effective.
• For your TV connection, you can use either the S-video output or the RGB output from the SCART connector
at a time. When you use the S-video output for your TV, be sure that the SCART connector (VIDEO OUT-AV
connector) is not used.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to
a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to a PAL television. Do not connect the unit to an NTSC television.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
English
To connect to a TV with the SCART connector
You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear
audio sound with better quality, connect the audio output to your audio equipment.
TV
The unit
IN
AV
RIGHT
LEFT
S-VIDEO
VIDEO
AUDIO OUT
DIGITAL OUT
PCM STREAM
IN
VIDEO OUT
COMP.
RGB
S-VIDEO
AV COMPU LINK
S-VIDEO VIDEO
AV
AND VIDEO
LEFT
Y
C
AUDIO
RGB
RIGHT
2
COAXIAL
SCART cable
(not supplied)
Set the COMP./RGB-Y/C switch correctly according to your TV.
• If the TV only accommodates the composite video signal, set the switch to
“COMP./RGB.” Also, at the same time, you need to set the RGB/S-VIDEO AND
VIDEO switch to “S-VIDEO AND VIDEO.” Then, “S-VIDEO” appears on the
display window for a few seconds (see page 13).
COMP.
S-VIDEO
RGB
AND VIDEO
Y
C
RGB
COMP.
RGB
S-VIDEO
AND VIDEO
• If the TV accommodates the Y/C signals, set the switch to “Y/C” so that you
can enjoy better-quality pictures. Also, at the same time, you need to set the
RGB/S-VIDEO AND VIDEO switch to “S-VIDEO AND VIDEO.” Then, “S-VIDEO”
appears on the display window for a few seconds (see page 13).
Y
Y
C
RGB
COMP.
RGB
S-VIDEO
AND VIDEO
• If the TV accommodates the RGB signals, set the switch to “COMP./RGB.”
Also, at the same time, you need to set the RGB/S-VIDEO AND VIDEO switch
to “RGB.” Then, “RGB” appears on the display window for a few seconds.
C
RGB
If the RGB/S-VIDEO AND VIDEO switch is set to “S-VIDEO AND VIDEO,”
unwanted phenomenon such as abnormal TV image color will occur.
(Display Window)
-
VCDVD GROUP TITLE TRACK CHAP
1
A B
PROGRAM
RANDOM
IMPORTANT!
Note that you must change the switch position while the unit is stopped or the unit power is off (on
standby) with the DVD removed. Otherwise, the changed setting is not effective.
NOTE
• Do not connect the unit to an NTSC television. Connect it to a PAL television.
• When the unit is set to feed the RGB signals, the S-VIDEO jack does not feed correct signals.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To connect to an audio amplifier or receiver
You can enjoy high-quality audio by connecting the unit’s audio output to your amplifier or receiver.
The unit
RIGHT
LEFT
AUDIO OUT
DIGITAL OUT
PCM STREAM
VIDEO OUT
COMP.
RGB
S-VIDEO
AV COMPU LINK
S-VIDEO VIDEO
AV
AND VIDEO
Y
C
RGB
2
COAXIAL
Amplifier or receiver
Red
White
IN
White
Red
LEFT
AUDIO
RIGHT
Audio cable
(not supplied)
• Connect the unit’s AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or
receiver.
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting the unit’s DIGITAL OUT jack (COAXIAL) to the digital input
of a receiver, MD, etc. by using an optional digital cable. The digital audio signal from a disc (except MP3 disc)
is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in
decoder by using an optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we also recommend to make the analog connection, because,
depending on discs, no signal may be output from the DIGITAL OUT.
The unit
RIGHT
LEFT
AUDOUT
DIGITAL OUT
PCM STREAM
VIDEO OUT
DIGITAL OUT
COMP.
RGB
S-VIDEO
AV COMPU LINK
S-VIDEO VIDEO
AV
AND VIDEO
Y
C
RGB
2
COAXIAL
Digital equipment
Audio cable
(not supplied)
Red
White
IN
IN
White
Red
OPTICAL
LEFT
AUDIO
RIGHT
DIGITAL
COAXIAL
Coaxial digital cable
(not supplied)
NOTES
• When you connect the unit’s DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL
AUDIO OUTPUT” setting in the “AUDIO” page of the preference display correctly according to the connected
audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from
speakers, causing damage to your speakers. See “DIGITAL AUDIO OUTPUT” on page 46.
• With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are
invalid. Settings for these items must be made from the decoder.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
English
To connect the power cord
When all the audio/video connections have been made, plug the AC power cord into the wall outlet. The
STANDBY indicator lights and setup is completed.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric
shock, or other accidents.
Warning
• Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.
• Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other
accidents.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
To install batteries in the remote control unit
The battery compartment is located on the back of the remote control unit.
1 Press down on the point shown by the arrow at the top of the compartment
cover, and pull up the cover to open the compartment.
2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control
according to the polarity markings (“+” and “–”) inside the compartment and
on the batteries.
3 Place the cover over the compartment, and press down lightly.
• The batteries will last about six months with normal use. If the functions of the remote control become
erratic, replace the batteries. See below for more information.
Precautions for the safe use of batteries
Observe the following precautions for the safe use of batteries. If they are used improperly their life will be
shortened, they may burst or their contents may leak.
Precautions
• Remove the batteries from the remote control if it is not going to be used for a long period of time.
• Remove dead batteries and dispose of them properly.
• Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into
an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of different types, when replacing them.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
English
To use the remote control unit for TV operation
You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
TV
DVD
4
1
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV4
4
TV2
2
TV5
5
TV3
3
TV6
6
TV7
7
TV8
8
TV0
0
TV9
9
2-2
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
2-1,3-1
CH
+
+
VOL
VOL
ENER
3-2
CH
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
1 Set TV-DVD switch to TV position.
2 Holding down TV/VIDEO - CANCEL, enter the manufacturer code of your TV listed below by using the
numeric buttons (0 to 9).
Do not release TV/VIDEO - CANCEL. Keep holding it until the next step is completed.
Example:
To enter the manufacturer code “01”: Press “0” then “1.”
3 Press ENTER while holding down TV/VIDEO - CANCEL.
4 Try to operate your TV by pressing TV STANDBY/ON
.
If your TV turns on or off, you have successfully set the control signal.
Manufacturer code list
No. Manufacturer
No. Manufacturer
No. Manufacturer
01
02
03
04
05
06
07
08
09
10
11
12
13
14
JVC
15
16
17
18
19
20
21
22
23
24
25
26
27
28
GRADIENTE
SANYO
29
30
31
32
33
34
35
36
37
38
39
40
41
MIVAR
PHILIPS/CCE/MAGNAVOX
MITSUBISHI
PANASONIC
RCA
FINLUX
PHILCO/DAEWOO
LG (GOLDSTAR)
GRUNDIG
NOKIA
FUNAI
SAMSUNG
SHARP
NEC/GRADIENTE
PHILCO
SAMSUNG/PEONY/CHANGHONG
SONY
SAMSUNG
AIWA
TOSHIBA
BEIJING/NOBLEX
JVC (ONWA)
JVC (ONWA)
JVC (ONWA)
THOMSON
ZENITH
DAEWOO
JINXING/PEONY
PEONY
PHILCO/HITACHI
PANASONIC
SAMSUNG
SANYO/SEARS
TOSHIBA
KONKA
FERGUSON
ITT
TCL
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
The following buttons can be used for operating the TV :
To use the CURSOR 5/∞/2/3(CH+, CH–, VOL–, VOL+), TV/VIDEO - CANCEL and numeric buttons for TV
control, set the TV - DVD switch to “TV.”
TV
DVD
TV
Turns the TV on or off.
TV/VIDEO
CANCEL
Switches the TV input mode between TV and VIDEO.
Selects the TV channels directly.
TV1
TV
*
For some TVs, pressing “+10” functions as the “100+,” while“10” functions as
the ENTER button if your TV requires pressing the ENTER button after selecting
a channel number.
1
10
TV0
0
MUTING
Mutes the TV sound.
+
10
CH
+
Changes the TV channels.
Adjusts the TV volume.
CH
+
VOL
VOL
NOTES
• The remote control unit is initially set for operating a JVC TV.
• If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
In the following description, the buttons on the remote control unit are mainly used, however, you may use
the corresponding buttons on the front panel of the unit if available.
English
Setting TV-DVD switch to DVD
Set TV-DVD switch to DVD position.
Now you can enjoy playing DVD VIDEO, Audio CD, Video CD, SVCD and MP3 discs after turning on the unit.
TV
DVD
TV-DVD switch
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
Turning on/off the unit
Press DVD STANDBY/ON
on the remote control unit or press STANDBY/ON
on the front panel.
STANDBY/ON
STANDBY
TV
DVD
STANDBY/ON
STANDBY/ON
OPEN/
CLOSE
TV
DVD
DVD STANDBY/ON
TV1
1
TV4
4
TV2
2
TV5
5
TV3
3
TV6
6
TV7
7
TV
10
TV8
8
TV0
0
TV9
9
MUTING
+
10
• You can turn on the unit by pressing the
3
button.
In this case, the unit starts playback if the disc is set
in the disc tray.
• If no disc is set, “NO DISC” appears on the display
window.
• You can turn on the unit by pressing the 0(OPEN/
CLOSE) button on the front panel.
.
NOTE
• Even if you press one of the above buttons to turn off the unit, the unit is not disconnected from the AC
power source as long as it is connected to the wall outlet. This state is called the standby mode. In this
state, the unit consumes a very small amount of power.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Inserting and removing discs
1 Press 0(OPEN/CLOSE) to open the disc tray.
2 Place a disc in the disc tray.
With the label side up
• To insert an 8-cm disc,
place it in the inner recess.
3 Press 0(OPEN/CLOSE) to close the disc tray.
• If you press 0(OPEN/CLOSE) during playback, the unit stops playback and opens the disc tray.
NOTES
• The unit can playback DVD VIDEO, Audio CD, Video CD, SVCD and MP3 discs only. Do not load other disc
types. For details about playable disc types, see page 12.
• When loading a disc in the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may
be damaged when the disc tray is closed, and the disc may not be removed from the unit.
Basic playback
Now you can play a disc. First, let’s enjoy simple playback using a DVD VIDEO, Audio CD, Video CD or SVCD
disc according to the following procedure. For basic operations with an MP3 disc, see page 40.
To start playback
Press 3.
The unit starts playback from the beginning.
NOTES
• When the resume point is memorized, pressing 3starts playback from that
point instead of the beginning. See page 24 and 49.
PREVIOUS
CLEAR
NEXT
• During playback, the display window shows the title/chapter or track
Basic
control
buttons
SELECT
STROBE
number being played.
+
SLOW
SLOW
PLAY
• With Video CD/SVCD discs with PBC control or some DVD discs, the menu
display may appear on the TV screen after starting playback. In such a case,
select an item to be played back from the menu.
THEATER
SUB TITLE AUDIO POSITION
MODE
For operation using a menu, see page 25.
• With some DVD discs, the unit starts playback automatically after inserting
the disc.
.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
English
To stop playback completely
Press
7.
The unit stops playback.
To stop playback temporarily
Press 8.
The unit pauses playback. To resume playback, press 3.
.
To advance or reverse playback rapidly while monitoring
I During playback
From the Remote control unit
Press 1or ¡.
Each press of 1or ¡increases the playback speed. You can select the speed among 2x, 5x, 10x, 20x
and 60x the normal speed.
Pressing 3returns the unit to normal playback.
NOTE
• When you play a DVD VIDEO, Video CD, or SVCD disc, no sound comes out.
From the Front panel
Hold down 4or ¢.
Holding down ¢advances playback rapidly, while holding down 4reverses playback rapidly. The
speed will change from 5x to 20x the normal speed if you keep holding down the button for a certain
period of time. Releasing the button returns the unit to normal playback.
NOTES
• When you play a DVD VIDEO, Video CD, or SVCD disc, no sound comes out.
• When you play an MP3 disc, 4 and ¢ do not work.
To locate the beginning of the scene or song
I During playback
Press 4or ¢.
Press 4to locate the beginning of the current chapter, title, or track, and press ¢to locate the
beginning of the next chapter, title, or track.
NOTE
• When you play a Video CD/SVCD disc with the PBC function or a DVD VIDEO disc, the unit may locate a
different place, but it will generally locate the beginning of the title, chapter or track.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that
position next time you press 3.
To memorize the interrupted position
1 Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON.”
(See page 49 for details about how to set.)
2 At the position you want to interrupt playback, press
7, or press DVD STANDBY/ON
on the
remote control or STANDBY/ON on the front panel.
The unit memorizes the interrupted position.
• Even if you interrupt playback by pressing
7
in step 2 above and then turn off the power, the memory is not
cleared.
To resume playback
I While the disc you interrupt playback last time is still in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
• To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the disc tray.
*Press 7while stopped.
*Turn on the unit by pressing DVD STANDBY/ON (on the remote control) or STANDBY/ON
front panel).
(on the
NOTES
• The resume function does not work with Audio CD and MP3 discs.
• The resume function does not work if “RESUME” on the “SYSTEM” page of the preference display is set to
“OFF.”
• In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly
earlier than the resume point you stored.
• The resume function does not work in the program or random mode.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
In this section, we describe advanced operations for
playback of a DVD VIDEO, Audio CD, Video CD or
SVCD disc. For operations with an MP3 disc, see
pages 40 to 44.
English
2 Use CURSOR 5/∞/2/3to select a desired
item, then press ENTER.
The unit starts playback of the selected item.
Playing from a specific
position on a disc
You can play a disc from the selected track, title,
chapter, or from the specified time.
• With some discs, you can also select items by
entering the corresponding number using the
numeric buttons, which may cause the unit to
automatically start playback.
NOTES
• When
TOP MENU in step 1:
The disc does not have a menu listing the titles.
• When appears on the TV screen by pressing
MENU in step 1:
appears on the TV screen by pressing
To locate a desired scene from the DVD
menu
DVD VIDEO discs generally have their own menus
which show the disc contents. These menus contain
various items such as titles of a movie, names of
songs, or artist information, and display them on
the TV screen. You can locate a desired scene by
using the menu.
The disc does not have a menu.
• The menu button does not work while
stopped.
To locate a desired scene from the menu
of the Video CD/SVCD with PBC
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
9
Some Video CD/SVCD discs supports the PBC
function. PBC is an abbreviation of “PlayBack
Control.” A Video CD/SVCD disc recorded with PBC
has its own menus, such as a list of the songs of the
disc. You can locate a specific scene by using the
menu.
TV
10
TV0
0
MUTING
+
10
1
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
2
CH
PREVIOUS
NEXT
STROBE
CLEAR
SLOW
SELECT
+
SLOW
THEATER
SUB TITLE AUDIO POSITION
PLAY
MODE
TV
DVD
STANDBY/ON
OPEN/
CLOSE
DIGEST ANGLE
ZOOM
TV
DVD
3D
PHONIC
+
AMP VOL
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
2
RM-SXV004A
REMOTE CONTROL
7
8
TV0
0
9
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
I For TOP MENU operation:
ENTER
During DVD VIDEO playback or while stopped
For MENU operation:
CH
PREVIOUS
NEXT
STROBE
CLEAR
SELECT
During DVD VIDEO playback
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
1
1 Press TOP MENU or MENU.
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
The menu appears on the TV screen.
RM-SXV004A
REMOTE CONTROL
About menu
Normally, a DVD VIDEO disc which contains more than one
title may have a “title” menu which lists the titles. In this
case, the menu appears on the TV screen by pressing the
TOP MENU button. Some DVD VIDEO discs may also have a
different menu which appears by pressing the MENU button.
I When a Video CD/SVCD disc with PBC is stopped
1 Press 3.
A disc menu appears on the TV screen (The PBC
function is activated).
See the instructions of each DVD VIDEO disc for its
particular menu.
Example:
Example:
“PBC” is indicated in the display window on
the front panel.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
2 Use the numeric buttons to select the desired
1
Use the numeric buttons to specify the number.
* During DVD VIDEO playback (except when
a menu is shown), a chapter is specified.
* While a DVD VIDEO is stopped, a title is
specified.
item.
• See page 11 for details about how to use the
numeric buttons.
* For an Audio CD or Video CD/SVCD, a track
is specified.
The unit starts playback from the beginning of
the selection.
• See page 11 for details about how to use the
numeric buttons.
The unit starts playback of the selected item.
You can return to the menu by pressing the
RETURN button.
When “NEXT” or “PREVIOUS” appears on the
TV screen, the unit generally works as follows:
• Pressing ¢advances to the next page.
• Pressing 4returns to the previous page.
• The method of the operation is different
depending on the disc.
NOTES
• During DVD VIDEO playback, if a menu is
shown on the TV screen, the numeric buttons
may be used for selecting an item in the menu.
• If you want to playback a PBC-compatible Video
CD/SVCD disc without activating the PBC function,
start playback by using the numeric buttons
instead of the 3button.
• When
appears on the TV screen:
The title or track you have selected is not
contained in the disc.
• To activate the PBC function when a PBC-compatible
• This function does not work during Video CD/
Video CD/SVCD disc is being played back without
SVCD playback with PBC function.
the PBC function, press 7then press 3
.
• You can also activate the PBC function using the
play mode menu display as follows.
To locate a desired selection using
4or ¢
1 Press PLAY MODE.
2 Use CURSOR 2/3to move
to [PBC CALL],
then press ENTER.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
To locate a desired selection using the
numeric buttons
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
You can play a desired title or chapter (DVD VIDEO)
or track (Audio CD/Video CD/SVCD) by specifying
+
VOL
VOL
ENTER
CH
1
PREVIOUS
NEXT
STROBE
the number.
CLEAR
SELECT
.
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
DIGEST ANGLE
ZOOM
TV1
1
TV2
2
TV3
3
3D
PHONIC
+
AMP VOL
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
1
7
8
TV0
0
9
TV
10
MUTING
RM-SXV004A
REMOTE CONTROL
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
I For DVD VIDEO :
ENTER
CH
At any time except menu is displayed
PREVIOUS
NEXT
STROBE
For Audio CD : At any time
For Video CD/SVCD :
CLEAR
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
During playback without PBC function
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
1 Press 4or ¢.
With an Audio CD, Video CD or SVCD pressing
the button skips a track. With a DVD VIDEO
disc, pressing the button skips a chapter or title
depending on the disc configuration.
The selection number appears in the display
window on the front panel.
• To locate a subsequent selection, press ¢
once or repeatedly until the desired selection
number appears in the display.
• To locate to beginning of the current
selection, press 4once.
RM-SXV004A
REMOTE CONTROL
I For DVD VIDEO :
At any time except menu is displayed
For Audio CD : At any time
For Video CD/SVCD :
During playback without PBC function or while
stopped
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• To locate a former selection, press 4
repeatedly until the desired selection number
appears in the display.
English
4 Press ENTER.
The unit starts playback from the selected
chapter.
NOTES
• This function may not work with some DVD
VIDEO discs.
• The “10” and “+10” buttons are not used in this
function.
• This function does not work during Video CD/
SVCD playback with PBC function.
NOTES
• You can also locate a desired chapter directly
by specifying the chapter number using the
numeric buttons during playback (except when
a menu is shown). See page 26.
To locate a desired scene by specifying
the chapter number [CHAP.SEARCH]
• When the chapter number is incorrect in step 3 :
Overwrite the incorrect number with the correct
number.
• When
is displayed in the TV screen in step 4 :
If the current title of a DVD VIDEO disc being played
is divided into chapters, you can skip to a desired
chapter by specifying the chapter number using the
on-screen display.
The chapter you have selected is not contained
in the disc, or chapter search does not work on
the disc.
• To turn off the play mode menu:
TV
DVD
STANDBY/ON
Press PLAY MODE.
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
3
7
8
9
TV
10
TV0
0
MUTING
+
10
To locate a desired position in the
current title or track [TIME SEARCH]
TV/VIDEO
CANCEL
RETURN
CH
+
2-2, 4
+
VOL
VOL
ENTER
CH
PREVIOUS
NEXT
STROBE
2-1
CLEAR
SELECT
+
SLOW
SLOW
PLAY
You can play a disc from the desired position by
specifying the elapsed time from the beginning of
the current title or track using the TIME SEARCH
function.
Note that some DVD VIDEO discs do not contain
time information, and the TIME SEARCH function
cannot be used for them.
THEATER
MODE SUB TITLE AUDIO POSITION
1
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
I During DVD VIDEO playback
TV
DVD
1 Press PLAY MODE.
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV2
2
TV3
3
The DVD play mode menu appears on the TV
screen.
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
3
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
2 Use CURSOR 2/3to move to [CHAP.
RETURN
CH
+
2-2, 4
+
SEARCH], then press ENTER.
VOL
VOL
ENTER
“GO TO CHAPTER = ” appears under the menu.
CH
PREVIOUS
NEXT
STROBE
2-1
CLEAR
SELECT
DVD CONTROL
+
SLOW
SLOW
PLAY
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
THEATER
MODE SUB TITLE AUDIO POSITION
1
DIGEST ANGLE
ZOOM
GO TO CHAPTER =
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
3 Use the numeric buttons (0 to 9) to enter
I For DVD VIDEO : During playback
For Audio CD : During playback
For Video CD/SVCD :
the desired chapter number.
Example:
To select chapter number 8 :
Press “8” → ENTER.
To select chapter number 37 :
Press “3” → “7” → ENTER.
During playback without PBC function
1 Press PLAY MODE.
The play mode menu appears on the TV screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• When you make a mistake
Move the cursor to the incorrect value, then press
the correct button to re-select the value.
2 Use CURSOR 2/3to move to [TIME
SEARCH], then press ENTER.
“GO TO” appears under the menu.
GO TO 2 : 3 5 : _ _
Press CURSOR 2.
GO TO 2 : 3 _ : _ _
Press “4.”
3 Use the numeric buttons (0 to 9) to enter
the time.
You can specify the elapsed time of the current
title or track to set the location which you want
to playback from.
GO TO 2 : 3 4 : _ _
4 Press ENTER.
The unit starts playback from the specified
time.
NOTES
• When
appears on the TV screen in step 2 :
(for DVD VIDEO)
(for Audio CD)
The time you have selected is not contained on
the disc, or the time search function does not
work on the disc.
CD CONTROL
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
GO TO 0 2 : 3 4
GO TO 2 : 3 4 : 0 0
Also note that the time search function does
not work during Video CD/SVCD playback with
the PBC function.
• To turn off the play mode menu :
Selected time
Selected time
Press PLAY MODE.
• The TIME SEARCH function cannot be used
during program playback.
• “10” and “+10” buttons are not used in this
function.
• You can specify the time in hour/minute/second
format for DVD VIDEO discs, and in minute/second
format for Audio CD, Video CD and SVCD discs.
To locate a desired scene from the
display [DIGEST]
(for Video CD/SVCD)
VCD CONTROL
REPEAT A-B REPEAT TIME SEARCH PBC CALL
The unit can display the opening scene of each title
or chapter on a DVD VIDEO or each track of a Video
CD/SVCD. You can select a desired scene from
those displayed on the TV screen.
GO TO 0 2 : 3 4
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
Selected time
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
• Example (for DVD VIDEO)
To playback from 2(H):34(M):00(S)
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
3
CH
+
+
VOL
VOL
GO TO _ : _ _ : _ _
Press “2.”
ENTER
2
CH
PREVIOUS
NEXT
CLEAR
SELECT
STROBE
+
GO TO 2 : _ _ : _ _
Press “3.”
SLOW
PLAY
SLOW
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
1
3D
PHONIC
+
AMP VOL
GO TO 2 : 3 _ : _ _
Press “4.”
RM-SXV004A
REMOTE CONTROL
GO TO 2 : 3 4 : _ _
I For DVD VIDEO :
While stopped or during playback.
For Video CD/SVCD :
Press ENTER.
While stopped or during playback without
PBC function.
You do not have to press “0” to enter the trailing
zeros (for the last two digits in the example above).
Of course, it is possible to enter them.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
1 Press DIGEST.
Special picture playback
The unit provides special picture playback functions
including Frame-by-frame, Strobe, Slow-motion and
Zoom.
Up to nine opening scenes are displayed.
• While a DVD VIDEO disc is stopped :
The opening scene of each title appears on
the TV screen.
• During DVD VIDEO disc playback :
The opening scene of each chapter in the
current title appears on the TV screen.
• When a Video CD/SVCD disc is loaded :
The opening scene of each track appears on
the TV screen.
To advance a still picture
frame-by-frame
ENTER
CH
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
1
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
I While paused (still)
2 Use CURSOR 5/∞/2/3to select the
1 Press 8.
desired scene.
Each time you press 8, the still picture
advances to the next frame.
The selected scene is indicated by
.
Pressing 3returns to normal playback.
If there are more than 9 scenes, the digest screen
will have more than one page. In this case,
pressing ¢advances to the next page, while
pressing 4 returns to the previous page.
To display continuous still pictures
[STROBE]
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
Selected scene
CH
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
1, 2
+
SLOW
SLOW
PLAY
• When the lower right scene is selected, pressing
CURSOR 3advances to the next page if available.
Similarly, when the upper left scene is selected,
pressing CURSOR 2returns to the previous page
(if available).
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
• When there are more than one digest page, after
pressing DIGEST, pressing ¢before all 9 scenes
of the first page appear on the TV screen will
advance to the next page. Similarly, pressing 4
before all the scenes of the second or latter page
appears on the TV screen will return to the
previous page.
I During playback
1 At the point you want to view as continuous
photographs, press 8.
The unit pauses playback.
2 Press and hold 8for more than 1 second.
3 Press ENTER.
Nine continuous still pictures appear on the TV screen.
The unit starts playback from the selected
scene.
NOTE
• With some discs, depending on the contents, it
may take some time until all the scenes appear
on the screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To zoom a scene [ZOOM]
• Pressing 8when the nine still pictures are shown
will advance to the next nine still pictures.
• Pressing 3when the nine still pictures are shown
will advance pictures in normal playback speed.
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
• To cancel strobe play
Press and hold 8for more than 1 second.
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
NOTE
2
1
CH
• If you press and hold 8for more than 1 second
during playback, nine still pictures also appear
but they advance in normal playback speed.
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
To playback in slow-motion
[SLOW]
I During playback or while paused
1 Press ZOOM.
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
“ZOOM” appears on the TV screen.
The unit zooms in to the center part of the
scene to produce a double-sized image.
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
CH
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
1
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
ZOOM
I During playback
1 Press 8, then use 1/ ¡.
To play forward slow-motion, press ¡, and to
play reverse slow-motion (for DVD VIDEO discs
only), press 1. First, the unit plays the
slowest speed, and each time you press the
button, the playback speed increases.
2 Use CURSOR 5/∞/2/3to move the
zoomed-in scene.
• To return to normal playback
Press 3.
ZOOM
• To pause slow-motion playback
Press 8.
NOTES
• The sound is muted during slow-motion
playback.
• To return to normal playback
Press ZOOM again.
• Reverse slow-motion playback is not possible
for a Video CD/SVCD.
NOTE
• While zoomed, the picture may look coarse.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
1
3
7
2
2
8
3
1
9
4
2
10
5
6
11
17
12
18
Changing the playback
order
You can play titles or tracks on a disc inserted in the
desired order or in random order.
13
14
15
16
The programmed title/track
number is shown under each
program number.
• If you specify a wrong selection
Press TV/VIDEO-CANCEL. The last selection
programmed is erased.
To playback in the desired order
[PROGRAM]
• To clear the program
Press 7.
You can play titles or tracks on a disc inserted in the
desired order by using the Program function.
4 Press 3to start program play.
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
When all of the programmed titles/tracks have
finished playback, the unit stops but the
program remains.
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
3
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
2-2
NOTES
+
VOL
VOL
ENTER
• Some DVD VIDEO discs may not be played
back correctly in program mode.
CH
PREVIOUS
CLEAR
NEXT
STROBE
2-1
4
SELECT
• During program playback, pressing ¢skip to
the next selection of the program. Pressing 4
returns to the beginning of the current
selection, however, you cannot skip back to
the previous selection.
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
1
DIGEST ANGLE
ZOOM
+
3D
PHONIC
AMP VOL
RM-SXV004A
REMOTE CONTROL
• By pressing PLAY MODE during program
playback, the program table is displayed on the
TV screen and the current program number is
indicated in yellow.
I While stopped
1 Press PLAY MODE.
• To quit program playback
Press 7while stopped.
The play mode menu appears on the TV
screen.
The “PROGRAM” indicator in the display window
turns off.
Note that the program remains.
To clear the program, press 7while the program
table is shown on the TV screen.
2 Use CURSOR 2/3to move to
[PROGRAM] and press ENTER.
REPEAT
PROGRAM
RANDOM
• While stopped and the play mode menu is
1
7
2
8
3
9
4
5
6
10
16
11
17
12
18
displayed on the TV screen, by moving
to
13
14
15
[PROGRAM] and pressing ENTER, the program
mode quits. Note that the program remains.
The program table appears under the menu
bar (as shown above).
The “PROGRAM” indicator appears in the
display window on the front panel.
3 Specify the titles or tracks in the desired
order using the numeric buttons.
See page 11 for details about how to use the
numeric buttons.
Up to 18 titles or tracks can be programmed.
You may select the same title or track more
than once.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
To playback in random order
[RANDOM]
Repeat playback
You can repeat playback of the current selection or all
disc contents (except DVD VIDEO). You can also
repeat playback of a desired part.
You can play titles or tracks on a disc inserted in
random order by using the random function.
TV
DVD
To repeat the current selection or all
tracks [REPEAT]
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
TV
DVD
CH
+
STANDBY/ON
OPEN/
CLOSE
3
1
TV
DVD
+
VOL
VOL
ENTER
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
CH
PREVIOUS
CLEAR
NEXT
STROBE
TV7
TV8
TV9
2
7
TV
10
8
TV0
0
9
MUTING
SELECT
+
10
TV/VIDEO
CANCEL
RETURN
+
SLOW
SLOW
PLAY
CH
+
THEATER
2-2
MODE SUB TITLE AUDIO POSITION
+
VOL
VOL
ENTER
DIGEST ANGLE
ZOOM
3D
PHONIC
CH
+
AMP VOL
PREVIOUS
CLEAR
NEXT
STROBE
2-1
SELECT
RM-SXV004A
REMOTE CONTROL
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
1
DIGEST ANGLE
ZOOM
I While stopped
3D
PHONIC
+
AMP VOL
1 Press PLAY MODE.
RM-SXV004A
REMOTE CONTROL
The play mode menu appears on the TV
screen.
I For DVD VIDEO : During playback
For Audio CD/Video CD/SVCD :
2 Use CURSOR 2/3to move to
In any condition except Video CD/SVCD
playback with PBC
[RANDOM].
1 Press PLAY MODE.
REPEAT
PROGRAM
RANDOM
The play mode menu appears on the TV
screen.
2
Use CURSOR 2/3to move to [REPEAT],
then press ENTER.
Each time you press ENTER, the repeat mode
changes as follows depending on the disc type
and unit’s status :
3 Press ENTER.
The unit starts random playback.
The “RANDOM” indicator appears in the
display window on the front panel. After
playing all titles/tracks of the disc, random
playback ends.
• During DVD VIDEO playback
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT TITLE
• The same title or track will not be played back
more than once during random play.
• To stop/quit random playback in the middle
Press 7to stop playback. The unit is still in
random playback mode, so pressing 3starts
random playback again.
To quit random playback, press 7again while
stopped. The “RANDOM” indicator in the display
window turns off.
Selected repeat mode
REPEAT TITLE
(current title repeat)
REPEAT CHAPTER
(current chapter repeat)
NOTE
• Some DVD VIDEO discs may not be played
back correctly in the random mode.
No indication (off)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• Audio CD/Video CD/SVCD
English
To repeat a desired part
[A-B REPEAT]
(for Video CD/SVCD)
(for Audio CD)
VCD CONTROL
CD CONTROL
REPEAT A-B REPEAT TIME SEARCH PBC CALL
REPEAT A-B REPEAT TIME SEARCH
REPEAT ALL
REPEAT ALL
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
Selected repeat mode
RETURN
Selected repeat mode
CH
+
2-2, 3
2-1
+
VOL
VOL
ENTER
CH
REPEAT ALL (all track repeat)
PREVIOUS
CLEAR
NEXT
SELECT
STROBE
REPEAT 1 (current track repeat)
+
SLOW
PLAY
SLOW
THEATER
MODE SUB TITLE AUDIO POSITION
1
DIGEST ANGLE
ZOOM
No indication
(off)
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
• If you press 7in REPEAT ALL or REPEAT1 mode,
the unit stops playback but remains in the mode.
I During playback
• If you press 7in REPEAT TITLE or REPEAT
CHAPTER mode, the unit stops playback and quits
the mode.
1 Press PLAY MODE.
The play mode menu appears on the TV
screen.
• To quit repeat playback
2 Use CURSOR 2/3to move to [A-B
With
pointed at [REPEAT], press ENTER
REPEAT], then press ENTER at the
beginning of the part you want to repeat
(point A).
repeatedly until the mode is set to off.
NOTES
• Some DVD VIDEO discs do not allow the title
repeat or/and chapter repeat.
Make sure that the REPEAT mode is off. If any
REPEAT mode is selected, you cannot move
to [A-B REPEAT].
• Some DVD VIDEO discs automatically stop
playback in the middle of the disc.
3 Press ENTER at the end of the part you
• Repeat playback function cannot be used
during Video CD/SVCD playback with PBC
function.
want to repeat (point B).
The unit locates “A” and starts repeat playback
between “A” and “B.”
• To turn off the play mode menu display.
Press PLAY MODE.
(for DVD VIDEO)
(for Audio CD)
DVD CONTROL
CD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT A-B REPEAT TIME SEARCH
A 0:00:16
B 0:01:16
A 0:00:16
B 0:01:31
Point A Point B
Point A Point B
(for Video CD/SVCD)
VCD CONTROL
REPEAT A-B REPEAT TIME SEARCH PBC CALL
A 0:00:16
B 0:01:31
Point A Point B
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• To quit A-B repeat playback
Press 7. The unit stops playback and quits A-B
repeat mode.
Selecting a scene angle of
DVD VIDEO
You can enjoy a variety of scene angles if the DVD
VIDEO disc contains “multi-angle” parts, where
multiple cameras were used to shoot the same scene
from different angles.
• During playback, pressing ENTER when
pointed at [A-B REPEAT] quits A-B repeat mode
and continues playback.
is
• You can also quit A-B repeat mode by pressing 4
or ¢.
• At the beginning of a “multi-angle” part,
appears on the TV screen.
NOTES
• To turn off the play mode menu.
Press PLAY MODE.
To select a scene angle from the normal
screen [ANGLE]
• If
appears when pressing ENTER in step 2
during DVD/SVCD playback.
You cannot repeat the selected portion because
of the disc contents.
TV
DVD
• The A-B REPEAT function cannot be used
STANDBY/ON
TV
OPEN/
CLOSE
DVD
during program playback.
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
CH
PREVIOUS
CLEAR
NEXT
STROBE
2
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
1, 2
RM-SXV004A
REMOTE CONTROL
I During DVD VIDEO playback
1 Press ANGLE.
The Angle selection display appears on the TV
screen.
1 / 3
2 Use ANGLE or CURSOR 2/3to select the
desired angle.
Each time you press ANGLE or CURSOR 2/3,
the angle changes.
Example:
1 / 3
2 / 3
3 / 3
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
NOTES
Changing the language
and sound
For DVD VIDEO discs, you can select the subtitle
language, as well as the audio language/sound
included on a disc.
For Video CD/SVCD discs, you can select the audio
channel(s).
• The Angle selection display will automatically
disappear if you do not change the angle for 10
seconds.
• To turn off the Angle selection display
manually, press ENTER.
• When
appears on the TV screen
The current scene is not recorded from multiple
angles.
To select the subtitle language
[SUBTITLE]
To select a scene angle from the angle
list display [ANGLE]
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV1
1
TV2
2
TV3
3
TV7
TV8
TV9
TV4
4
TV5
5
TV6
6
7
TV
10
8
TV0
0
9
MUTING
TV7
TV8
TV9
+
10
7
TV
10
8
TV0
0
9
TV/VIDEO
CANCEL
RETURN
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
3
1
+
VOL
VOL
CH
+
ENTER
+
VOL
VOL
ENER
CH
2
PREVIOUS
CLEAR
NEXT
STROBE
3
CH
SELECT
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
1, 2
3D
PHONIC
DIGEST ANGLE
ZOOM
+
AMP VOL
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
RM-SXV004A
REMOTE CONTROL
I During playback
I During DVD VIDEO playback
1 Press SUBTITLE.
1 Press and hold ANGLE for more than 1
The Subtitle selection display appears on the
TV screen.
second.
(for DVD VIDEO)
(for SVCD)
Up to nine camera angles recorded on a disc
appear on the TV screen.
ON
1 / 3
ENGLISH
ON
1 / 4
2 To turn the subtitle on and off, press
SUBTITLE.
The selected camera angle
3 To select the desired subtitle language, use
CURSOR 2/3.
2 Use CURSOR 5/∞/2/3to select the
desired angle.
• For DVD VIDEO
Each time you press
CURSOR 2/3, the
subtitle language
changes.
Example:
3 Press ENTER.
1/3 ENGLISH
The unit starts playback by the selected angle
on the full-sized screen.
2/3 FRENCH
3/3 SPANISH
-/3 (off)
NOTES
• When
appears on the TV screen in step 1:
The current scene is not recorded from multiple
angles.
• During the operation above, audio is muted.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• For SVCD
(for DVD VIDEO)
(for Video CD)
Example:
OFF -/4
Pressing CURSOR 2/3cycles
among the four subtitle channels
on the right hand regardless of
whether the subtitle is recorded
or not.
You can also select the subtitle
by pressing SUBTITLE.
1 / 3
ENGLISH
STEREO
1/4
2/4
3/4
4/4
(for SVCD)
STEREO-1
NOTES
• For DVD VIDEO, the selected language may be
abbreviated on the TV screen. See “Appendix A :
Table of languages and their abbreviations” at the
end of this manual.
2 Use AUDIO or CURSOR 2/3to select the
• The Subtitle selection display will
automatically disappear if you do not change
the subtitle for 10 seconds.
desired audio.
• For DVD VIDEO
Each time you press AUDIO Example:
• To turn off the Subtitle selection display
manually, press ENTER.
or CURSOR 2/3, the audio
language or sound
changes.
1/3 ENGLISH
2/3 FRENCH
3/3 SPANISH
• When
appears on the TV screen:
You cannot select the subtitle.
To change the audio language or sound
[AUDIO]
• For Video CD/SVCD
Each time you press AUDIO or CURSOR 2/3, the
playback audio changes as follows.
By AUDIO selection, you can choose the audio
language of movies or choose to enjoy karaoke with
or without the vocal.
(Video CD)
STEREO
(SVCD)
STEREO-1
TV
DVD
STEREO-2
L-1
STANDBY/ON
OPEN/
CLOSE
L
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
R
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
R-1
10
TV/VIDEO
CANCEL
RETURN
CH
+
L-2
+
VOL
VOL
ENTER
CH
R-2
PREVIOUS
CLEAR
NEXT
STROBE
2
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
NOTES
DIGEST ANGLE
ZOOM
1, 2
• For DVD VIDEO, the selected language may be
abbreviated on the TV screen. See “Appendix A :
Table of languages and their abbreviations” at the
end of this manual.
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
• The Audio selection display will automatically
disappear if you do not change the audio for 10
seconds.
I During playback
1 Press AUDIO.
• To turn off the Audio selection display
manually, press ENTER.
The Audio selection display appears on the TV
screen.
• When
VIDEO disc):
You cannot select the audio.
appears on the TV screen (for a DVD
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
Selecting the picture
character
Enjoying virtual surround
sound
Using the 3D PHONIC function, you can get a
simulated surround effect from your stereo system.
You can select the picture character from among four
options according to the source program, lighting
condition of the room and/or personal preference.
To select the picture character
[THEATER POSITION]
To simulate surround sound
[3D PHONIC]
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV1
1
TV2
2
TV3
3
TV
DVD
TV4
4
TV5
5
TV6
6
TV1
1
TV2
2
TV3
3
TV7
TV8
TV9
TV4
4
TV5
5
TV6
6
7
TV
10
8
TV0
0
9
MUTING
TV7
TV8
TV9
+
10
7
TV
10
8
TV0
0
9
TV/VIDEO
CANCEL
RETURN
MUTING
+
10
TV/VIDEO
CANCEL
CH
+
RETURN
+
VOL
VOL
CH
+
ENTER
+
VOL
VOL
ENTER
CH
PREVIOUS
CLEAR
NEXT
STROBE
CH
SELECT
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
+
SLOW
SLOW
PLAY
THEATER
+
SLOW
SLOW
PLAY
MODE SUB TITLE AUDIO POSITION
1, 2
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
1, 2
RM-SXV004A
REMOTE CONTROL
RM-SXV004A
REMOTE CONTROL
I During playback
I During playback
1 Press THEATER POSITION.
The theater position display appears on the TV screen.
1 Press 3D PHONIC.
2 Select the desired theater position by using
The 3D PHONIC display appears on the TV
screen.
THEATER POSITION.
Each time you press the THEATER POSITION, the
picture character changes as follows :
2 Select the desired mode by using 3D
PHONIC.
THEATER 1
Each time you press the 3D PHONIC, the 3D
PHONIC mode changes as follows :
3D PHONIC DRAMA
Selected picture character
THEATER 1
Selected effect mode
“THEATER OFF” is
THEATER 2
the normal position.
3D PHONIC ACTION*
3D PHONIC DRAMA
3D PHONIC THEATER
3D PHONIC OFF
Selecting a higher
number tones down
the picture character.
THEATER 3
THEATER OFF
NOTES
• The theater position display will automatically
disappear if you do not change the theater
position for 5 seconds.
• To turn off the theater position display
manually, press ENTER.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• ACTION
Suitable for action movies and sports programs
in which sounds dynamically move.
Checking the status
You can view the disc/time information, as well as
the DVD functions status on the TV screen.
• DRAMA
Natural and warm sound. You can enjoy movies
in a relaxed mood.
To check the disc/time information
• THEATER
You can enjoy sound effects like in a major
theater in Hollywood.
TV
DVD
ꢀ
When you play a DVD VIDEO disc recorded in
Dolby Digital which contains more than 3
channels, ACTION does not appear.
STANDBY/ON
TV DVD
OPEN/
CLOSE
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
NOTES
+
VOL
VOL
ENTER
• The 3D PHONIC display will automatically
disappear if you do not change the 3D PHONIC
for 5 seconds.
CH
1
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
+
SLOW
SLOW
PLAY
• To turn off the 3D PHONIC display manually,
THEATER
MODE SUB TITLE AUDIO POSITION
press ENTER.
DIGEST ANGLE
ZOOM
3D
PHONIC
• With a Video CD disc, if the Audio setting is set
to L or R, you cannot activate the 3D PHONIC
function (i.e. the 3D PHONIC mode is fixed to
OFF).
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
I During playback
Conversely, when the 3D PHONIC function is
active, changing the AUDIO setting to L or R
from STEREO cancels the 3D PHONIC function.
1
Press DISPLAY once for a Audio CD, Video CD
or SVCD disc, or twice for a DVD VIDEO disc.
The disc/time display appears on the TV screen.
• The 3D PHONIC function works correctly when
playing back discs recorded in the Dolby
Surround or Dolby Digital 5.1-CH format.
It also works when playing back discs other
than those above, but does not provide the
correct effect.
(for DVD VIDEO)
Mbps
TITLE
1
CHAP.
25
TIME
2:25:25
BITRATE
3.3
• The 3D PHONIC function does not affect the
DTS or Dolby Digital bitstream signal from the
DIGITAL OUT jack.
Transmission rate
Elapsed time
Current chapter number
• The sound effect will not be set or operate,
even if 3D PHONIC is pressed, for the sound of
DVD VIDEO discs recorded in Linear PCM.
Current title number
(for Audio CD, Video CD or SVCD playing
without PBC)
• When you set the 3D PHONIC function to on,
the DOWN MIX and COMPRESSION settings in
the AUDIO page of the preference display are
disabled.
TRACK 1TIME 00:08
EACH
Time mode
Current track elapsed time
Current track number
(for Video CD/SVCD playing with PBC)
TRACK 1TIME 00:08 PBC
PBC on status
Current track elapsed time
Current track number
• To turn off the disc/time display.
Press DISPLAY.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
English
To check the DVD function status
To dim the brightness of
the display window
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
You can dim the brightness of the display window.
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
TV
10
MUTING
+
10
Dimming brightness of the display
window
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
CH
1
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
TV
DVD
+
SLOW
SLOW
PLAY
STANDBY/ON
TV
OPEN/
CLOSE
DVD
THEATER
MODE SUB TITLE AUDIO POSITION
TV1
1
TV2
2
TV3
3
DIGEST ANGLE
ZOOM
TV4
4
TV5
5
TV6
6
3D
PHONIC
+
AMP VOL
TV7
TV8
TV9
7
8
TV0
0
9
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
RM-SXV004A
REMOTE CONTROL
1
CH
+
+
VOL
VOL
ENTER
CH
I During DVD VIDEO playback
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
+
SLOW
SLOW
PLAY
1 Press DISPLAY.
THEATER
MODE SUB TITLE AUDIO POSITION
The DVD function status display appears on
the TV screen.
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
1
RM-SXV004A
REMOTE CONTROL
1 / 2
1 / 2
1 / 2
ENGLISH ENGLISH
I When no disc is inserted or while stopped
1 Press CURSOR ∞while holding down
ANGLE.
The current selections of the camera angle,
audio language and subtitle language are
shown.
You can set the brightness from among three
levels. Each press of the button makes the
display window darker.
To restore the display window brighter, press
CURSOR 5.
• To turn off the DVD function status display.
Press DISPLAY twice.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
This unit can playback CD discs recorded by the MP3
format (we refer to those discs as MP3 discs in this
manual).
Unavailable functions
Operations for MP3 discs are similar to those for
Audio CD discs, though there are some restrictions
and differences.
As described earlier, there are some restriction for
playback of MP3 discs. Following functions are not
available with MP3 discs.
What is MP3?
Unavailable functions for MP3 discs
MP3 is the abbreviation of “MPEG1 Audio Layer
3.” MPEG Audio is a compression specification
that compresses the audio portion only. This
image compression method is used in DVD or
Video CD, etc. The audio data has been
compressed into about 1/10.
Function
Function
name
Resume
To resume playback
Time search
To locate a desired position in the
current track
About MP3 disc
On an MP3 disc, each material (song) is recorded on
each Track (file), which usually belongs to a Group
(folder).
Manual search
To advance or reverse playback
rapidly
A-B repeat
3D PHONIC
To repeat a desired part
To simulate surround sound
Group 1
Group 2
NOTES
Track 1
Track 2
Track 3
Track 1
Track 2
• You cannot playback Tracks in the desired
(programmed) or random order, nor playback a
Track repeatedly.
• The screen saver function is not active with an
MP3 disc, as with an Audio CD.
This unit can recognize up to 99 Groups and up to
254 Tracks per Group, however, the number of
Tracks to be played back on a disc is limited to 1023.
If a disc includes more than 1023 Tracks, the unit stops
detecting Tracks when the number of detected Tracks
reaches 1023 and ignores the subsequent Tracks. The
unit also ignores any non-MP3 file in the disc.
NOTES for making a private MP3 disc
using a CD-R/CD-RW disc:
• Select “ISO 9660” as the disc format.
• Do not select the “multi-session” recording.
• Finalize the disc.
NOTES
• Because of the disc characteristics or recording
condition, some discs may not be played back
or it takes time to start playback.
•
The unit does not support “packet writing” discs.
• If there are any Tracks (files) which are stored
on a disc directly and do not belong to any
Group (directory), the unit recognized them as
belonging to an independent Group.
• The unit does not output a digital audio signal
from DIGITAL OUT when playing back an MP3
disc.
• The unit plays back Groups/Tracks on an MP3
disc in the alphabetical order.
For example, if there are three title Groups
[one], [two] and [three] on a disc, the playback
order is [one], [three] then [two]. Tracks in a
Group are played back in the same way.
Therefore, an MP3 disc on the market may be
played back in the different order from the
order printed on its sleeve.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
English
Track/Group selection using the
numeric buttons
Basic operations
Basic operations using the basic
control buttons
While stopped, you can select a Group to be played
using the numeric buttons.
During playback, you can select a Track in the
current Group to be played using the numeric
buttons.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
How to select a Track or Group:
TV4
4
TV5
5
TV6
6
The same method for selecting a track of an Audio
CD disc can be applied for selecting a Group or
Track of an MP3 disc except for a three-figure Track.
For selecting a three-figure Track (i.e. Track 100 or
higher), follow the procedure below.
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
TV
DVD
STANDBY/ON
OPEN/
CLOSE
CH
TV
DVD
TV1
1
TV2
2
TV3
3
PREVIOUS
CLEAR
NEXT
STROBE
Basic
control
buttons
TV4
4
TV5
5
TV6
6
SELECT
2
1
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
MUTING
+
+
10
SLOW
PLAY
SLOW
TV/VIDEO
CANCEL
RETURN
THEATER
AUDIO POSITION
CH
+
MODE
SUB TITLE
+
VOL
VOL
ENTER
DIGEST ANGLE
ZOOM
CH
3D
PHONIC
+
AMP VOL
PREVIOUS
NEXT
STROBE
CLEAR
SLOW
SELECT
+
SLOW
THEATER
SUB TITLE AUDIO POSITION
PLAY
RM-SXV004A
REMOTE CONTROL
MODE
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
The following table shows basic functions of basic
control buttons.
As you can see 3, 7, 8and 4/¢buttons
function the same as with Audio CD discs, though
1/¡buttons function is different.
I During playback
1 Holding down the +10 button for 2 seconds
Buttons
Functions
or more.
“- - -” appears in the display window showing
that you can now enter a three-figure number
directly.
Starts playback
3
Stops playback completely
Pauses playback temporarily
Skips back or forward a Track*
Skips back or forward a Group
7
8
2 Use the numeric buttons (0 to 9) to specify
the desired Track number directly.
4/¢
1/¡
• Example:
To specify Track 254 : press 2, 5 and 4.
* You can skip a Track across a Group. i.e. pressing
¢when the last Track of the current Group is
• You can also specify a single- or double-figure
Track using this method.
selected skips to the first Track of the next Group.
Example:
NOTES
• To specify Track 5, press 0, 0 and 5.
• To specify Track 25, press 0, 2 and 5.
• The current Group and Track numbers are shown
on the display window in the following manner.
-
A B
VCDVD
GROUP TITLE TRACK CHAP
1
PROGRAM
RANDOM
Current track elapsed time
Current track number
Current group number
• You cannot advance or reverse playback of an
MP3 disc rapidly.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
• If you specify a wrong selection
Press TV/VIDEO-CANCEL. The last selection
programmed is erased.
Advanced functions
• To clear the program
Press 7 .
Program playback
You can playback Groups on an MP3 disc in the
desired order.
4 Press 3 to start program play.
When all of the programmed groups have
finished playback, the unit stops but the
program remains.
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
• To quit program playback
Press 7 while stopped.
TV7
TV8
TV9
7
8
TV0
0
9
3
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
The “PROGRAM” indicator in the display window
turns off.
Note that the program remains.
To clear the program, press 7 while the program
table is shown on the TV screen.
CH
+
2-2
+
VOL
VOL
ENTER
CH
PREVIOUS
CLEAR
NEXT
STROBE
2-1
4
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
1
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
• While stopped and the play mode menu is
displayed on the TV screen, by moving to
[PROGRAM] and pressing ENTER, the program
mode quits. Note that the program remains.
RM-SXV004A
REMOTE CONTROL
I While stopped
NOTES
1 Press PLAY MODE.
• You cannot playback Tracks in a Group in the
desired order.
The play mode menu appears on the TV
screen.
• By pressing PLAY MODE during program
playback, the program table is displayed on the
TV screen and the current program number is
indicated in yellow.
2 Use CURSOR 2/3 to move
to
[PROGRAM] and press ENTER.
REPEAT
PROGRAM
RANDOM
1
7
2
8
3
9
4
5
6
10
16
11
17
12
18
13
14
15
The program table appears under the menu
bar (as shown above).
The “PROGRAM” indicator appears in the
display window on the front panel.
3 Specify the groups in the desired order
using the numeric buttons.
See page 11 for details about how to use the
numeric buttons.
Up to 18 groups can be programmed. You may
select the same group more than once.
REPEAT
PROGRAM
RANDOM
1
3
7
2
2
8
3
1
9
4
2
10
5
6
11
17
12
18
13
14
15
16
The programmed group
number is shown under
each program number.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
English
Random playback
Repeat playback
You can playback Groups on an MP3 disc in random
order.
You can repeat playback of the current Group or all
Groups.
TV
DVD
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV2
2
TV3
3
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
TV7
TV8
TV9
MUTING
7
TV
10
8
TV0
0
9
+
10
MUTING
TV/VIDEO
CANCEL
+
10
RETURN
TV/VIDEO
CANCEL
RETURN
CH
+
3
CH
+
2-2
+
VOL
VOL
+
VOL
VOL
ENTER
ENTER
CH
CH
PREVIOUS
CLEAR
NEXT
STROBE
2
PREVIOUS
CLEAR
NEXT
STROBE
2-1
SELECT
SELECT
+
SLOW
SLOW
PLAY
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
THEATER
MODE SUB TITLE AUDIO POSITION
1
DIGEST ANGLE
ZOOM
1
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
RM-SXV004A
REMOTE CONTROL
I While stopped
I During playback
1 Press PLAY MODE.
1 Press PLAY MODE.
The play mode menu appears on the TV
screen.
The play mode menu appears on the TV
screen.
2
Use CURSOR 2/3to move to [RANDOM].
2
Use CURSOR 2/3to move to [REPEAT],
then press ENTER.
REPEAT
PROGRAM
RANDOM
Each time you press ENTER, the repeat mode
changes as follows depending on the disc type
and unit’s status:
CD CONTROL
REPEAT A-B REPEAT TIME SEARCH
REPEAT ALL
3 Press ENTER.
The unit starts random playback.
The “RANDOM” indicator appears in the
display window on the front panel. After
playing all groups of the disc, random
playback ends.
Selected repeat mode
REPEAT ALL (all group repeat)
REPEAT 1 (current group repeat)
• The same group will not be played back more than
once during random play.
No indication
(off)
• To stop/quit random playback in the middle
Press 7to stop playback. The unit is still in
random playback mode, so pressing 3starts
random playback again.
To quit random playback, press 7again while
stopped. The “RANDOM” indicator in the display
window turns off.
• If you press 7in REPEAT ALL or REPEAT1 mode,
the unit stops playback but remains in the mode.
• To quit repeat playback
With
pointed at [REPEAT], press ENTER
repeatedly until the mode is set to off.
NOTES
• Tracks in a Group are played back in the
NOTE
regular order.
• To turn off the play mode menu display.
• Pressing the 4/¢ button while random
playback skips forward or back a track.
Press PLAY MODE.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 disc playback
Disc/time information
TV
DVD
STANDBY/ON
OPEN/
CLOSE
TV
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
TV
10
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
+
VOL
VOL
ENTER
CH
1
PREVIOUS
CLEAR
NEXT
STROBE
SELECT
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
I During playback
1 Press DISPLAY.
The disc/time display appears on the TV screen.
MP3 GROUP 1 TRACK 11
00:08 BITRATE 128kbps
TIME
Transmission rate
Current track elapsed time
Time mode
Current track number
Current group number
Disc type
• To turn off the disc/time display
Press DISPLAY.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
English
3 Press CURSOR 2/3to select the setting
Selecting preferences
you want.
• To turn off the preference display, press CHOICE
You can set various preferences for playback via
four dedicated displays.
or move
to [EXIT] and press ENTER.
• For details about each setting, see the
following paragraphs:
How to set preferences
Note that you cannot bring up a preference display
during playback or when an Audio CD or MP3 disc
is loaded in the disc tray.
LANGUAGE page
MENU LANGUAGE
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
You can select the default “display” language to be
TV1
1
TV2
2
TV3
3
displayed if it is contained on the disc.
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
TV
10
8
TV0
0
9
• The language is initially set to “ENGLISH.”
Each time you press CURSOR 3, the language
setting changes in the following order:
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
3
1
+
VOL
VOL
ENTER
CH
2
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PREVIOUS
CLEAR
NEXT
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
SELECT
STROBE
ENGLISH
ENGLISH
ENGLISH
+
SLOW
PLAY
SLOW
ON SCREEN LANGUAGE
THEATER
MODE SUB TITLE AUDIO POSITION
EXIT
DIGEST ANGLE
ZOOM
3D
PHONIC
PRESS
KEY
+
AMP VOL
RM-SXV004A
REMOTE CONTROL
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language
code from AA to ZU
I
When no disc is inserted in the disc tray, or when a
DVD VIDEO or Video CD/SVCD is inserted and stopped
(See “Appendix A : Table of languages and their
abbreviations” at the end of this manual.)
1 Press CHOICE.
One of the preference pages appears on the TV
screen.
Pressing CURSOR 2changes the language setting
in the reverse order of the above.
There are four preference pages: LANGUAGE,
AUDIO, DISPLAY and SYSTEM. To turn the page,
* If the selected language is not recorded, the
move
LANGUAGE
to the desired tab using CURSOR 2/3.
disc’s default display language will be displayed.
AUDIO
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
AUDIO LANGUAGE
ENGLISH
STREAM / PCM
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
DIGITAL AUDIO OUTPUT
DOWN MIX
ENGLISH
ENGLISH
ENGLISH
You can select the default audio language to be
Lo / Ro
ON
COMPRESSION
played if it is contained on the disc.
ON SCREEN LANGUAGE
EXIT
EXIT
• The language is initially set to “ENGLISH.”
Each time you press CURSOR 3, the language
setting changes in the following order :
PRESS
KEY
PRESS
KEY
DISPLAY
SYSTEM
AUDIO
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
AUDIO
DISPLAY
SYSTEM
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
LANGUAGE
ENGLISH
ENGLISH
ENGLISH
4:3 LB
MODE 2
ON
OFF
OFF
AUTO STANDBY
RESUME
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
ON SCREEN LANGUAGE
DVD 1
AV COMPULINK MODE
EXIT
EXIT
EXIT
PRESS
KEY
PRESS
KEY
PRESS
KEY
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language
code from AA to ZU
(See “Appendix A : Table of languages and their
abbreviations” at the end of this manual.)
2 Move
to select the item you want to set
by using CURSOR 5/∞.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
Pressing CURSOR 2changes the language setting
in the reverse order of the above.
ENGLISH
ENGLISH
ENGLISH
ON SCREEN LANGUAGE
* If the selected language is not recorded, the
disc’s default audio language will be played.
EXIT
PRESS
KEY
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
SUBTITLE
AUDIO page
You can select the default subtitle language to be
displayed if it is contained on the disc.
DIGITAL AUDIO OUTPUT
To connect the unit’s digital output to an external
device equipped with a digital input, this item must be
set correctly.
• DIGITAL AUDIO OUTPUT is initially set to
“STREAM/PCM.”
• The language is initially set to “ENGLISH.”
Each time you press CURSOR 3, the language
setting changes in the following order:
AUDIO
DISPLAY
SYSTEM
LANGUAGE
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
ON SCREEN LANGUAGE
AUDIO
DISPLAY
SYSTEM
LANGUAGE
EXIT
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
PRESS
KEY
COMPRESSION
EXIT
PRESS
KEY
ENGLISH → SPANISH → FRENCH → CHINESE →
GERMAN → ITALIAN → JAPANESE → language
code from AA to ZU
(See “Appendix A : Table of languages and their
abbreviations” at the end of this manual.)
• PCM ONLY
When you connect the DIGITAL OUT jack of the
unit to the linear PCM digital input of other audio
equipment.
Pressing CURSOR 2changes the language setting
in the reverse order of the above.
• STREAM/PCM
When you connect to the digital input of an
amplifier to a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
* If the selected language is not recorded, the
disc’s default subtitle language will be displayed.
• DOLBY DIGITAL/PCM
ON SCREEN LANGUAGE
When you connect to the digital input of a Dolby
Digital decoder, or an amplifier with a built-in
Dolby Digital decoder.
You can select the on-screen display language to be
displayed.
• The language is initially set to “ENGLISH.”
Each time you press CURSOR 3, the language
setting changes as follows:
The following chart shows the relationship between
types of playback discs and output signals.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
Output
ENGLISH
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ENGLISH
ENGLISH
ENGLISH
Playback
discs
DOLBY
DIGITAL/
PCM
ON SCREEN LANGUAGE
STREAM/
PCM
PCM
ONLY
EXIT
PRESS
KEY
DVDwith48kHz, 48 kHz,16 bit
16 bit linear PCM linear PCM
+
+
+
DVDwith48kHz, 48 kHz,
20/24 bit linear
PCM
20/24 bit
linear PCM
+
DVDwith96kHz,
linear PCM
No output
+
No output
+
+
+
DTS
bitstream
DVD with DTS
DVD with
Dolby Digital
Dolby Digital
bitstream
48 kHz, 16 bit
linear PCM
ON SCREEN LANGUAGE
BILDSCHIRMMENUE-SPRACHE
English
German
ENGLISH
DEUTSCH
FRANCAIS
DVDwithMPEG MPEG
multichannel bitstream
44.1 kHz,
Video CD/SVCD 16 bit
linear PCM
48 kHz, 16 bit
linear PCM
+
+
+
French
+
+
Pressing CURSOR 2changes the language setting
in the reverse order of the above.
48 kHz,16 bit
linear PCM
Audio CD
Audio CD with DTS
+
+
+
+
DTS
bitstream
MP3 disc
No output
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
COMPRESSION
You can compress the dynamic range of the sound
if needed. Using this function, you can listen to
sound at low volumes easily.
English
NOTES
• The unit does not provide the DTS decoding
function.
• When playing a DVD VIDEO or Audio CD disc
with DTS, use a DTS decoder to get correct
signals from your speakers. Never use the
unit’s analog output jacks, which output
incorrect signals that may damage your
speakers.
• COMPRESSION is initially set to “ON.”
AUDIO
DISPLAY
SYSTEM
LANGUAGE
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
COMPRESSION
EXIT
• If you connect the analog outputs and digital
outputs simultaneously, be sure to select the
source of the amplifier correctly, or set the
level control of the amplifier connected to the
analog outputs to minimum.
PRESS
KEY
• ON
Audio is played back with the dynamic range
compressed.
DOWN MIX
• OFF
To playback a DVD VIDEO disc recorded with
surround multichannel audio correctly, the DOWN
MIX setting must be properly made according to
your audio system.
Audio is played back as it was recorded.
NOTES
Note that this setting affects the output signal from
the AUDIO (both DIGITAL and ANALOG) output
jacks when playing back a DVD VIDEO disc recorded
with surround multichannel audio.
• The Compression function works only when
playing back a disc recorded with DOLBY
DIGITAL 1CH or 2CH. The setting is not
effective for other discs.
• DOWN MIX is initially set to “Lo/Ro.”
• The Compression function does not work
when the 3D PHONIC function is activated.
AUDIO
DISPLAY
SYSTEM
LANGUAGE
• With the digital connection, the
STREAM / PCM
DIGITAL AUDIO OUTPUT
DOWN MIX
Lo / Ro
ON
COMPRESSION settings in the AUDIO page of
the preference display are invalid. Settings for
these items must be made from the decoder.
COMPRESSION
EXIT
PRESS
KEY
• Lt/Rt
When you enjoy multichannel surround audio by
connecting the unit’s AUDIO output (normally, the
DIGITAL output) to a surround decoder.
• L0/R0
When you enjoy conventional 2-channel stereo
audio by connecting the unit’s AUDIO output to a
stereo amplifier/receiver or television set, or
when you duplicate audio of a DVD VIDEO disc
recorded with surround audio to your MD,
cassette, etc.
NOTES
• The DOWN MIX function does not work when
the 3D PHONIC function is activated.
• The DOWN MIX setting does not affect an
MPEG or Dolby Digital bitstream signal from
DIGITAL OUT.
To enjoy the DOWN MIX effect from DIGITAL
OUT when playing back a disc recorded with
the MPEG multichannel or Dolby Digital format,
set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”
(see page 46).
• When playing back a disc recorded with DTS,
you cannot get the DOWN MIX effect from
both DIGITAL and ANALOG outputs.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
SCREEN SAVER
DISPLAY page
A television monitor screen may be burned out if a
static picture is displayed for a long time. To prevent
this, the unit automatically activates the screen
saver function if a static picture, such as an on-
screen display or menu, is displayed for over 5
minutes.
MONITOR TYPE
You can select the monitor type to match your TV
when you playback DVD VIDEO discs recorded for
wide screen televisions.
• MONITOR TYPE is initially set to “4:3 LB
.”
• SCREEN SAVER is initially set to “MODE 2.”
AUDIO
DISPLAY
4:3 LB
SYSTEM
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
LANGUAGE
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MODE 2
ON
MODE 2
ON
EXIT
EXIT
PRESS
KEY
PRESS
KEY
• MODE 1
The current picture gets dark.
• 4:3 LB
(Letter Box Conversion)
When you connect a normal TV to the unit.
When you play a wide picture recorded on a DVD
VIDEO disc, the picture is displayed with bands
across the upper and lower portions of the screen.
• MODE 2
The “screen saver” picture appears and its
brightness changes.
• OFF
The screen saver function is off.
NOTES
• The monitor screen of a projector or projection
TV is easily burned out if the screen saver
mode is set to OFF and a static picture is
displayed for a long time.
• 4:3 PS
(Pan Scan Conversion)
When you connect a normal TV to the unit.
When you play a wide picture recorded on a DVD
VIDEO disc, a portion of the picture is
• The screen saver function is not activated
when the selected disc is an Audio CD or MP3
disc.
automatically cut off from the left and right sides
of the image.
Depending on the disc, it may not be possible to
playback in this mode. In that case, the picture is
ON SCREEN GUIDE
The unit can display “on-screen guide” icons or
characters on the picture, which show what is
happening to the disc or the unit.
played back as in 4:3 LB
mode.
• ON SCREEN GUIDE is initially set to “ON.”
AUDIO
DISPLAY
4:3 LB
SYSTEM
LANGUAGE
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
MODE 2
ON
EXIT
PRESS
KEY
• 16:9 WIDE (Wide Television screen)
When you connect a wide-screen TV to the unit.
• ON
The on-screen guide will be displayed.
• OFF
The on-screen guide will not be displayed.
Examples of “on-screen guide” icons or
characters are following (see page 11) :
,
,
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
English
SYSTEM page
Limiting playback by
children
This function restricts playback of DVD VIDEO discs
which contain violent (and other) scenes according
to the level set by the user. For example, if a movie
which includes violent scenes supports the parental
lock feature, such scenes which you do not want to
let children view can be cut or replaced with other
scenes.
AUTO STANDBY
When the unit is stopped for more than 30 minutes or 60
minutes, the unit enters standby mode automatically.
• AUTO STANDBY is initially set to “OFF.”
AUDIO
DISPLAY
SYSTEM
LANGUAGE
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
EXIT
PRESS
KEY
To set Parental Lock for the first time
[PARENTAL LOCK]
• 60
Time is set to 60 minutes.
• 30
Time is set to 30 minutes.
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
• OFF
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
The auto standby function is off.
TV7
TV8
TV9
6
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
1, 3, 5, 7
+
VOL
VOL
RESUME
ENTER
CH
You can select the resume function to be on or off.
PREVIOUS
CLEAR
NEXT
STROBE
2, 4
See page 24.
• RESUME is initially set to “OFF.”
SELECT
1
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
AUDIO
DISPLAY
SYSTEM
DIGEST ANGLE
ZOOM
LANGUAGE
3D
PHONIC
OFF
OFF
+
AMP VOL
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
RM-SXV004A
REMOTE CONTROL
EXIT
PRESS
KEY
I While a DVD VIDEO disc is stopped or no disc is
inserted
• ON
Pressing 3while stopped or on standby starts
playback from the resume point if it is
memorized.
1 Press ENTER while holding down 7on the
remote control unit.
The Parental Lock on-screen display appears
on the TV screen.
• OFF
points [Country Code].
Pressing 3while stopped or on standby starts
playback from the beginning of the disc.
2 While
points [Country Code], use
CURSOR 2/3to select the country code.
NOTE
• The resume function does not work for Audio
The country code whose standards were applied
to rate the DVD VIDEO disc should be selected.
See “Appendix B : Country/Area code list for
parental lock.” (See page 57.)
CDs and MP3 discs.
PARENTAL LOCK
AV COMPULINK MODE
GB
Country Code
Set Level
This item is provided for use in the future. Leave it as
- - - -
PASSWORD
the default setting (“DVD1”).
EXIT
AUDIO
DISPLAY
SYSTEM
LANGUAGE
PRESS
KEY
ENTER
OFF
OFF
AUTO STANDBY
RESUME
DVD 1
AV COMPULINK MODE
EXIT
3 Press ENTER.
PRESS
KEY
moves to [Set Level].
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
4 While
points [Set Level], use CURSOR
2/3to select the parental lock level.
To change the settings [PARENTAL
LOCK]
PARENTAL LOCK
GB
1
Country Coce
Set Level
You can change the Parental lock settings later.
- - - -
PASSWORD
TV
DVD
EXIT
STANDBY/ON
OPEN/
CLOSE
TV
DVD
PRESS
KEY
ENTER
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
7
8
TV0
0
9
2-1, 5-1
TV
10
MUTING
+
10
Each time you press CURSOR 2/3, the
TV/VIDEO
CANCEL
RETURN
1, 2-2, 3-2,
4-2, 5-2
3-1, 4-1
parental level changes as follows:
CH
+
+
VOL
VOL
ENTER
1
.
CH
PREVIOUS
CLEAR
NEXT
.
SELECT
STROBE
.
1
+
SLOW
PLAY
SLOW
THEATER
8
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
–
RM-SXV004A
REMOTE CONTROL
• “1” is the strictest level. “–” means no restriction.
Discs rated higher than the selected level are
restricted.
I While a DVD VIDEO disc is stopped or no disc is
inserted
1 Press ENTER while holding down 7on the
remote control unit.
The Parental Lock on-screen display appears
on the TV screen.
5 Press ENTER.
moves to [PASSWORD].
points [PASSWORD].
6 Enter your 4-digit password using the
PARENTAL LOCK
numeric buttons (0 to 9).
GB
8
Country Code
Set Level
- - - -
PASSWORD
PARENTAL LOCK
GB
8
Country Code
Set Level
EXIT
- - - -
PASSWORD
CURRENT PASSWORD? ··· PRESS 0~9 KEY
EXIT
NEW PASSWORD? ··· PRESS 0~9 KEY.
2 Enter your current 4-digit password using
the numeric buttons (0 to 9) and press
ENTER.
7 Press ENTER.
The parental level and password are set.
moves to [EXIT].
moves to [Country Code] if you enter the
correct password.
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen, and you
cannot go to next step.
Pressing ENTER again returns to the opening
display.
• If you enter an undesired password in step 6
above, reenter the password before pressing
ENTER.
3 To change the country code, use CURSOR
2/3to select the desired country code and
press ENTER.
moves to [Set Level].
When you change the country code, you must
select the parental level.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
English
4 To change the set level, use CURSOR 2/3
To temporarily release the Parental
lock [PARENTAL LOCK]
to select the desired level while
points
[Set Level], and then press ENTER.
When you set the parental level strictly, some discs
may not be played back at all. When you insert such
a disc and try to play it, the following Parental Lock
on-screen display appears on the TV screen, asking
you whether you want the parental lock to be
temporarily released or not.
moves to [PASSWORD].
5 Enter the password using the numeric
buttons (0 to 9) and press ENTER.
moves to [EXIT].
The password entered in the above step
becomes the new password. If you do not
change the password, enter the same
password as in the step 2.
TV
DVD
STANDBY/ON
TV
OPEN/
CLOSE
DVD
TV1
1
TV2
2
TV3
3
TV4
4
TV5
5
TV6
6
TV7
TV8
TV9
Even if you want to change only the country/
area code and/or set level, do not forget to
enter the password after changing the country/
area code and/or set level. Otherwise, the new
country code and/or set level will not become
effective.
2
7
TV
10
8
TV0
0
9
MUTING
+
10
TV/VIDEO
CANCEL
RETURN
CH
+
1-2
+
VOL
VOL
ENTER
CH
PREVIOUS
CLEAR
NEXT
STROBE
1-1
SELECT
Pressing ENTER again returns to the opening
display.
+
SLOW
SLOW
PLAY
THEATER
MODE SUB TITLE AUDIO POSITION
DIGEST ANGLE
ZOOM
3D
PHONIC
+
AMP VOL
NOTES
• When you enter the wrong password more
RM-SXV004A
REMOTE CONTROL
than 3 times in step 2 above,
moves to
[EXIT] automatically and CURSOR 5/∞does
not work.
• If you forget your password in step 2
Enter “8888.”
1 Use the CURSOR 5/∞to move
[YES], then press ENTER.
to
moves to the PASSWORD field.
When selecting [NO], press OPEN/CLOSE to
remove the disc.
PARENTAL LOCK
This DISC can’t play now!
Temporary
Level Change ?
NO
YES
– – – –
PASSWORD
PRESS ENTER
EXECUTE
2 Enter your 4-digit password using the
numeric buttons (0 to 9).
If you enter the wrong password, “WRONG!
RETRY...” appears on the TV screen.
Enter the correct password.
The Parental lock is released, and the unit
starts playback.
NOTE
• When you enter the wrong password more
than 3 times in step 2 above,
moves to [NO]
automatically and CURSOR 5/∞do not work.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Care and handling of discs
How to handle discs
When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily
damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up
correctly, and such a disc may cause the player to malfunction.
Label side
Do not damage the label side, stick paper to or use any adhesive on its surface.
Storage
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective
cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or
in a place where the humidity or temperature is high. Avoid leaving discs in your car!
Maintenance of discs
If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center
outwards.
If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol
or any anti-static agents.
CAUTION
Sometimes during playback noise or images may be garbled. This is sometimes due to the disc. (It may
not be up to industry standards.)
These symptoms are caused by the discs, not by the malfunction of the unit.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before
requesting service.
Symptom
Possible case
Remedy
Power does not come on.
Power plug is not inserted securely.
Too far from the unit.
Plug in securely.
More closer to the unit.
Point the infrared light- emitting
window toward the remote sensor on
the front panel.
The tip of the remote unit is not
pointed in the right direction.
Remote control does not work.
Batteries are exhausted.
Replace the batteries with new ones.
Take out the batteries and insert them
again in the correct direction.
Battery polarity is incorrect.
The TV/VIDEO - CANCEL,
CURSOR or numeric buttons do
not work.
To control the unit, set the TV - DVD
switch to “DVD.” To control your TV,
set the TV - DVD switch to “TV.”
The TV - DVD switch is not correctly
set.
Connection of video cable is incorrect.
Input selection of TV is incorrect.
Disc is not playable.
Connect the cable correctly.
Select correctly.
No picture is displayed on the
monitor.
Use a playable disc (see page 12).
The unit is set to feed the RGB
signals (instead of the S-video
signals).
Picture is not normal when
using the S-VIDEO jack.
Make the unit feed the S-video signals
(see pages 13 and 15).
The unit is connected to a VCR
directly and the copyguard function
is activated.
Connect the unit so that the picture
signal flows directly to the TV.
Picture is noisy.
Connection is incorrect.
Check the connections.
Select correctly.
No audio is reproduced.
Input selection of amplifier is
incorrect.
No audio is reproduced when
playing back a DVD disc
recorded with 96 kHz, linear
PCM audio.
The audio signal is not derived
from the unit's DIGITAL OUT.
Use the AUDIO OUT when playing back
such discs.
Sound is distorted or noise is
generated.
Disc is dirty.
Wipe the disc surface.
MONITOR TYPE is not correctly set.
Television is not correctly set.
Select monitor type correctly (see page 48).
Set the television correctly.
Picture does not fit the
television screen.
Turn off the power and unplug the
power cord, then connect the power
cord again.
Microcomputer malfunction due to
lightning or static electricity.
Operation is not possible.
Moisture condensation caused by a
sudden change of temperature or
humidity.
Turn off the power, then turn it on a few
hours later.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
For MP3 disc playback
Symptom
Possible case
Remedy
MP3 disc is recorded with the
“packet writing.”
No sound comes out.
It cannot be played.
Specific files (tracks) are not
played.
Files other than MP3 are included.
They cannot be played.
This system plays the files in the
alphabetic order. So, the playback
order can vary.
Files (tracks) are not played in
the recorded order.
–
Particular function does not
work.
On MP3 disc, some functions do
not work.
For unavailable functions, see page 40.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Specifications
General
Readable discs:
DVD VIDEO, Audio CD (CD-DA), Video CD, SVCD, CD-R/RW (CD-DA, SVCD,
Video CD, MP3 Format), MP3 Format
PAL
Video format:
Other
Power requirements:
Power consumption:
Mass:
AC 230 V
, 50 Hz
14 W (POWER ON), 4.2 W (STANDBY mode)
2.0 kg
Dimensions (W x H x D):
230 mm x 66.5 mm x 298.7 mm
Video output
VIDEO OUT (pin jack):
S-VIDEO OUT (S jack):
1.0 Vp-p (75 Ω)
Y Output:
1.0 Vp-p (75 Ω)
286 mVp-p (75 Ω)
C Output:
0-700 mV (75 Ω)
500 Lines
RGB out:
Horizontal resolution:
Audio outputs
ANALOG OUT (pin jack):
DIGITAL OUT:(COAXIAL):
2.0 Vrms (10 kΩ)
0.5 Vp-p (75 Ω termination)
Audio characteristics
Frequency response:
CD
(sampling frequency 44.1 kHz): 2 Hz to 20 kHz
DVD (sampling frequency 48 kHz): 2 Hz to 22 kHz
DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz
16 bit: More than 98 dB
Dynamic range:
20 bit: More than 106 dB
24 bit: More than 106 dB
Unmeasurable (less than 0.002%)
Less than 0.002%
Wow and flutter:
Total harmonic distortion:
* Specifications and appearance subject to change without prior notice.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Appendix A : Table of languages and their abbreviations
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations.
To select the desired language, select the abbreviation corresponding the language you want to.
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
Afar
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
Inupiak
RN
RO
RU
RW
SA
SD
SG
SH
SI
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
SK
SL
Slovenian
Samoan
Shona
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Kirghiz
Latin
Lingala
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
Telugu
Tajik
Thai
EO
ET
EU
FA
FI
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Twi
Ukrainian
Urdu
Uzbek
Hindi
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
Croatian
Hungarian
Armenian
Interlingua
Interlingue
PS
PT
QU
RM
IE
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
English
Appendix B : Country/Area code list for parental lock
This list is used for the parental Lock operation. For details, see page 49.
ES Spain
ET Ethiopia
LB Lebanon
LC Saint Lucia
SA Saudi Arabia
SB Solomon Islands
SC Seychelles
SD Sudan
AD Andorra
AE United Arab Emirates
AF Afghanistan
FI
Finland
LI
Liechtenstein
FJ Fiji
LK Sri Lanka
AG Antigua and Barbuda
Falkland Islands
LR Liberia
LS Lesotho
LT Lithuania
LU Luxembourg
LV Latvia
LY Libyan Arab Jamahiriya
MA Morocco
MC Monaco
MD Moldova, Republic of
MG Madagascar
MH Marshall Islands
ML Mali
MM Myanmar
MN Mongolia
MO Macau
SE Sweden
SG Singapore
SH Saint Helena
AI
Anguilla
FK
(Malvinas)
AL Albania
AM Armenia
Micronesia
(Federated States of)
FO Faroe Islands
FR France
FX France, Metropolitan
GA Gabon
GB United Kingdom
GD Grenada
GE Georgia
GF French Guiana
GH Ghana
FM
SI
Slovenia
AN Netherlands Antilles
AO Angola
AQ Antarctica
AR Argentina
AS American Samoa
AT Austria
Svalbard and Jan
Mayen
SJ
SK Slovakia
SL Sierra Leone
SM San Marino
SN Senegal
SO Somalia
SR Suriname
ST Sao Tome and Principe
SV El Salvador
SY Syrian Arab Republic
SZ Swaziland
TC Turks and Caicos Islands
TD Chad
AU Australia
AW Aruba
AZ Azerbaijan
BA Bosnia and Herzegovina
BB Barbados
BD Bangladesh
BE Belgium
BF Burkina Faso
BG Bulgaria
BH Bahrain
GI
Gibraltar
GL Greenland
GM Gambia
Northern Mariana
Islands
MP
GN Guinea
GP Guadeloupe
GQ Equatorial Guinea
GR Greece
South Georgia and the
South Sandwich Islands
GT Guatemala
GU Guam
GW Guinea-Bissau
GY Guyana
MQ Martinique
MR Mauritania
MS Montserrat
MT Malta
MU Mauritius
MV Maldives
MW Malawi
French Southern
Territories
TF
BI
Burundi
TG Togo
BJ Benin
BM Bermuda
BN Brunei Darussalam
BO Bolivia
BR Brazil
BS Bahamas
BT Bhutan
BV Bouvet Island
BW Botswana
BY Belarus
BZ Belize
CA Canada
CC Cocos (Keeling) Islands
CF Central African Republic
CG Congo
CH Switzerland
CI
CK Cook Islands
CL Chile
CM Cameroon
CN China
CO Colombia
CR Costa Rica
CU Cuba
CV Cape Verde
CX Christmas Island
CY Cyprus
CZ Czech Republic
DE Germany
DJ Djibouti
DK Denmark
DM Dominica
DO Dominican Republic
DZ Algeria
GS
TH Thailand
TJ Tajikistan
TK Tokelau
TM Turkmenistan
TN Tunisia
TO Tonga
TP East Timor
TR Turkey
MX Mexico
MY Malaysia
MZ Mozambique
NA Namibia
NC New Caledonia
NE Niger
HK Hong Kong
Heard Island and
McDonald Islands
HN Honduras
HR Croatia
HT Haiti
HM
TT Trinidad and Tobago
TV Tuvalu
TW Taiwan
NF Norfolk Island
NG Nigeria
HU Hungary
Tanzania, United
Republic of
NI
Nicaragua
TZ
ID
IE
IL
Indonesia
Ireland
Israel
NL Netherlands
NO Norway
NP Nepal
NR Nauru
NU Niue
NZ New Zealand
OM Oman
PA Panama
PE Peru
PF French Polynesia
PG Papua New Guinea
PH Philippines
PK Pakistan
PL Poland
UA Ukraine
UG Uganda
IN
India
United States Minor
Outlying Islands
Cô te d’Ivoire
UM
British Indian Ocean
Territory
Iraq
Iran (Islamic Republic of)
Iceland
Italy
IO
US United States
UY Uruguay
UZ Uzbekistan
IQ
IR
IS
IT
Vatican City State
(Holy See)
VA
JM Jamaica
JO Jordan
JP Japan
KE Kenya
KG Kyrgyzstan
KH Cambodia
Kiribati
KM Comoros
KN Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
KR Korea, Republic of
KW Kuwait
KY Cayman Islands
KZ Kazakhstan
Saint Vincent and the
Grenadines
VC
VE Venezuela
VG Virgin Islands (British)
VI
Virgin Islands (U.S.)
Saint Pierre and
Miquelon
VN Vietnam
VU Vanuatu
PM
KI
PN Pitcairn
Wallis and Futuna
Islands
WF
PR Puerto Rico
PT Portugal
PW Palau
PY Paraguay
QA Qatar
RE Réunion
RO Romania
RU Russian Federation
RW Rwanda
WS Samoa
YE Yemen
KP
YT Mayotte
YU Yugoslavia
ZA South Africa
ZM Zambia
ZR Zaire
EC Ecuador
EE Estonia
EG Egypt
EH Western Sahara
ER Eritrea
Lao People’s
Democratic Republic
LA
ZW Zimbabwe
57
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”
This equipment has been disigned and manufactured to meet international safety standards
but, like any electrical equipment, care must be taken if you are to obtain the best results and
safety is to be assured.
Do read the operating instructions before you attempt to use the equipment.
Do ensure that all electrical connections (including the mains plug, extension leads and
interconnections between pieces of equipment) are properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw the mains plug when making or
changing connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of
your equipment.
Do be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or
if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it
is designed for unattended operation or has a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do
this.
Special arrangements may need to be made for infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the
requirements of traffic safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume as such use can permanently damage your
hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete
safety always fit the manufacturer’s approved stand or legs with the fixings provided
according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
—NEVER let anyone, especially children, push anything into holes, slots or any other opening
in the case -this could result in a fatal electrical shock.;
—NEVER guess or take chances with electrical equipment of any kind -it is better to be safe
than sorry!
VICTOR COMPANY OF JAPAN, LIMITED
EN
J
V
C
0502KTYCREJSC
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Setting the VIDEO OUT Select Switch
When you connect either the AV (SCART) connector or the S-VIDEO output of the unit to a TV, you need to appropriately
set the S-VIDEO AND VIDEO/RGB switch and the COMP./RGB-Y/C switch on the rear panel of the unit.
• For details, refer to pages 13 thru 15 of the INSTRUCTIONS.
IMPORTANT!
Note that you must change the switch position while the unit is stopped or the unit power is off (on standby) with the
DVD removed. Otherwise, the changed setting is not effective.
DEUTSCH
Einstellen des Schalters VIDEO OUT
Wenn Sie die AV-(SCART-)Buchse oder die S-VIDEO-Buchse des Gerätes an einen Fernseher anschließen müssen Sie
den Schalter S-VIDEO AND VIDEO/RGB und den Schalter COMP./RGB-Y/C an der Geräterückseite richtig einstellen.
• Näheres erfahren Sie auf Seiten 13 bis 15 unter BEDIENUNGSANLEITUNG.
WICHTIG!
Beachten Sie, dass Sie die Schalter bei gestopptem oder ausgeschaltetem Gerät (im Standby-Modus) und ohne
eingelegte DVD betätigen müssen. Anderenfalls wird die Umschaltung nicht erkannt.
FRANÇAIS
Réglage du sélecteur VIDEO OUT
Lors du raccordement du connecteur AV (SCART) ou de la sortie S-VIDEO du lecteur à un téléviseur, il convient de régler
correctement les commutateurs S-VIDEO AND VIDEO/RGB et COMP./RGB-Y/C situés sur la face arrière de l’appareil.
• Pour plus de détails, voir pages 13 à 15 des MANUAL D’INSTRUCTIONS.
IMPORTANT!
Changer la position du commutateur lorsque l’appareil est à l’arrêt ou lorsqu’il est hors tension (en attente), sans DVD
inséré. Sinon, le changement ne sera pas opérationnel.
NEDERLANDS
De VIDEO OUT-keuzeschakelaar instellen
Wanneer u de AV-connector (SCART) of de S-VIDEO-uitgang van de speler aansluit op een TV, moet u de S-VIDEO AND
VIDEO/RGB-schakelaar en de COMP./RGB-Y/C-schakelaar op het achterpaneel van de speler op de juiste wijze instellen.
• Voor meer details, raadpleeg pagina’s 13 t/m 15 van de GEBRUIKSAANWIJZING.
BELANGRIJK!
Let op: u moet de instelling van de schakelaar veranderen terwijl de speler is gestopt, of terwijl de speler is
uitgeschakeld (in stand-by) terwijl de DVD verwijderd is. Anders is de gewijzigde instelling niet van kracht.
ESPAÑOL
Ajuste del conmutador selector VIDEO OUT
Cuando inserte el conector AV (SCART) o la salida S-VIDEO de la unidad a un televisor, necesitará fijar el selector S-
VIDEO AND VIDEO/RGB y el selector COMP./RGB-Y/C del panel posterior de la unidad.
• Para más detalles, consulte las páginas 13 a 15 de las MANUAL DE INSTRUCCIONES.
¡IMPORTANTE!
Tenga en cuenta que debe cambiar el selector mientras la unidad esté parada o apagada (en standby) con el DVD
fuera de la unidad. Caso contrario, los ajustes no serán efectivos.
LE40883-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
ITALIANO
Impostazione del selettore VIDEO OUT
Quando si collega il connettore AV (SCART) o l’uscita S-VIDEO dell’unità a un televisore, è necessario impostare in modo
corretto il selettore S-VIDEO AND VIDEO/RGB e il selettore COMP./RGB-Y/C nel pannello posteriore dell’unità.
• Per ulteriori dettagli, fare riferimento alle pagine da 13 a 15 delle ISTRUZIONI.
IMPORTANTE!
Tenere presente che è necessario cambiare la posizione del selettore a lettore fermo o spento (su standby) con il DVD
rimosso. In caso contrario, l’impostazione modificata non avrà effetto.
SVENSKA
Ställa in VIDEO-utsignalens omkopplare
När du ansluter spelarens AV-kontakt (SCART) eller S-VIDEO-utsignal till en TV-apparat, måste du ställa in S-VIDEO-
OCH VIDEO/RGB-omkopplaren samt COMP./RGB-Y/C-omkopplaren på spelarens baksida.
• För mer information, se sidorna 13 till 15 i BRUKSANVISNING.
VIKTIGT!
Observera att enheten måste vara stoppad eller avstängd (i standby) och DVD-skivan uttagen när du växlar
omkopplarens läge. Annars utförs inte ändringen.
SUOMI
VIDEO OUT SELECT -kytkimen asettaminen
Kun kytket joko laitteen AV (SCART)- tai S-VIDEO -liittimen televisioon, laitteen takapaneelissa olevan S-VIDEO AND
VIDEO/RGB- ja COMP./RGB Y/C -kytkimen pitää olla oikeassa asennossa.
• Katso lisätietoja KÄYTTÖHJE sivuilta 13 - 15.
TÄRKEÄÄ!
Kytkimen asennon voi muuttaa, kun laitteen toisto on pysäytetty tai siitä on katkaistu virta (valmiustilassa) eikä DVD-
levyä ole levyasemassa. Muuten asetus ei ole voimassa.
DANSK
Indstilling af VIDEO OUT-vælger
Når du forbinder systemets AV-stik (SCART-stikket) eller S-VIDEO-udgang til et tv, skal du sørge for at indstille vælgerne
S-VIDEO AND VIDEO/RGB og COMP./RGB-Y/C på bagpanelet korrekt.
• Se side 13-15 i INSTRUKTIONSBOG.
VIGTIGT!
Bemærk, at vælgerindstillingen skal ændres, mens systemet er standset eller strømmen er slået fra (standby) og DVD-
pladen er fjernet. Ellers bliver den ændrede indstilling ikke gyldig.
Download from Www.Somanuals.com. All Manuals Search And Download.
|