DVD/CD PLAYER
KV-DV7
KV-DV7
KV-DV7
REPRODUCTOR DVD/CD
LECTEUR DVD/CD
POWER SUBTITLE
AUDIO
ANGLE
DISPLAY
D
TIME
STEP
MENU
SETUP
H/P VOL
ENTER
TITLE
H/P VOL
RETURN
SLOW
1
4
2
5
8
0
3
6
OPEN
KV-DV7 DVD / CD PLAYER
ZOOM
DVD / VIDEO CD / CD
REPEAT
7
SHIFT
S
9
CLEAR
C
A-B RPT
PHONES
DVD VCD/CD
M
SEARCH MODE
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
LVT0590-001A
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ...............................
2
SPECIAL EFFECTS PLAYBACK........... 18
• Slow-Motion Playback.......................... 18
• Frame-by-frame Playback .................... 18
• Zoom ................................................... 19
INTRODUCTION ...........................
4
PREPARATION .............................
5
5
Installing the battery .................................
DVD SETUP MENU ........................ 20
Setting initial audio language ................... 20
Setting initial subtitle language ................. 21
Setting initial disc menu language ............ 22
Setting digital audio output ....................... 22
Setting compression ................................. 23
Setting audio output during
BASIC PLAYBACK .........................
Starting playback .....................................
• Listening with headphones ..................
Showing the on-screen bar.......................
• Checking the playing time....................
6
6
7
8
9
DVD PLAYBACK ........................... 10
Selecting subtitles.................................... 10
Selecting audio languages ....................... 11
Selecting multi-angle views ...................... 11
Low Speed Search................................. 24
Setting monitor type................................. 25
Setting closed caption .............................. 26
Changing the color of the on-screen bar .. 26
Setting zoom preference .......................... 27
MENU-DRIVEN PLAYBACK............... 12
Menu operations ...................................... 12
• While playing a DVD ............................ 12
• While playing a VCD ............................ 13
MAINTENANCE ............................ 29
Handling discs ......................................... 29
LANGUAGE CODES ....................... 30
GLOSSARY ................................. 31
SEARCH FUNCTIONS ..................... 14
Searching for a particular point ................ 14
• Forward Search .................................. 14
• Reverse Search .................................. 14
Locating a particular point directly............ 15
LOCATION OF THE BUTTONS............ 32
• Remote controller ................................ 32
• Control panel ...................................... 33
REPEAT PLAYBACK ....................... 16
Playing repeatedly ................................... 16
• Repeat Play ........................................ 16
• A-B Repeat ......................................... 17
TROUBLESHOOTING...................... 34
SPECIFICATIONS .......................... 35
CAUTION on Volume Setting
Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for
example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume
before playing a disc and adjust it as required during playback.
BEFORE USE
* For safety....
* Temperature inside the car....
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
• Stop the car before performing any complicated
operations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
About this manual
This manual mainly explains operations using the buttons on the remote control.You can also use the
buttons on the control panel for the same operations if they have the similar or same marks.
Discs you can play:
Disc
Type
Mark
(Logo)
Video
Format
Region Code
Number*
1
ALL
DVD Video
NTSC
Video CD
Audio CD
COMPACT
DIGITAL AUDIO
• On some discs, their actual operations may be different from what is explained in this manual.
• The following discs cannot be played back;
– DVD-Audio, DVD-ROM, DVD-RAM, DVD-R, DVD-RW, CD-ROM, CD-R, CD-RW, CD-I
(CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage the speakers.
Examples:
* Note on Region Code
DVD players and DVD Video discs have their own Region
Code numbers. This unit only can play back DVD discs
whose Region Code numbers include “1.”
Disc structure – DVD, Video CD (VCD) and Audio CD (CD)
A DVD disc consists of Titles, and each title may be divided into some Chapters. (See Example 1.)
For example, if a DVD disc contains some movies, each movie may have its own title number, and it
may be further divided into some chapters.
On the other hand, a VCD or CD consists of Tracks. (See Example 2.)
In general, each song has its own track number. (On some discs, each track may also be divided by
Indexes.)
When playing back a VCD with Playback Control (PBC) function, you can select what to view using the
menu shown on the monitor. (While operating a Video CD using the menu, some of the functions such
as Repeat and Track Search may not work.)
Example 1: DVD disc
Example 2 : Video CD/Audio CD
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
Installing the battery
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
• The remote signal reception lamp flashes when
the unit receives a remote control signal from the
remote controller.
When the controllable range or effectiveness of the
remote controller decreases, replace the battery.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point pen
or a similar tool.
2) Remove the battery holder.
OPEN
KV-DV7 DVD / CD PLAYER
DVD / VIDEO CD / CD
PHONES
DVD VCD/CD
(back side)
1)
Remote signal
reception lamp
Remote sensor
2)
• Do not expose the remote sensor to strong light
(direct sunlight or artificial lighting).
2. Place the battery.
Slide the battery into the holder with the + side
facing upwards so that the battery is fixed in the
holder.
Lithium coin battery
(product number:
CR2025)
WARNING:
• Store the batteries in a place which children
cannot reach.
If a child accidentally swallows the batteries,
immediately consult a doctor.
• Do not recharge, short, disassemble or heat the
batteries or dispose of in a fire.
Doing any of these things may cause the
batteries to give off heat, crack or start a fire.
• Do not leave the batteries with other metallic
materials.
3. Return the battery holder.
Insert again the battery holder pushing it until
you hear a clicking sound.
Doing this may cause the batteries to give off
heat, crack or start a fire.
(back side)
• When throwing away or saving batteries, wrap in
tape and insulate; otherwise, it may cause the
batteries to give off heat, crack or start a fire.
• Do not poke the batteries with tweezers or
similar tools.
Doing this may cause the batteries to give off
heat, crack or start a fire.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
The following marks used in this manual indicate
the discs to be used.
Starting playback
1 Press POWER
to turn on the
power.
POWER
DVD Video
Video CD
Audio CD
The lamps on the buttons on
the unit light up.
POWER SUBTITLE
AUDIO
ANGLE
8
STEP
POWER
2 Press OPEN on the unit.
DISPLAY
The loading slot cover opens.
D
TIME
7
STEP
MENU
SETUP
OPEN
3
H/P VOL
H/P VOL
H/P VOL
5
∞
TITLE
ENTER
Disc loading lamp
H/P VOL
RETURN
DO NOT force the cover open by hand.
SLOW
1
4
2
5
8
0
3
6
3 Insert a disc into the loading slot.
The unit draws in the disc
automatically.
ZOOM
REPEAT
• When the power is off, you
cannot insert a disc.
7
SHIFT
S
9
CLEAR
C
A-B RPT
SHIFT (S)
M
SEARCH MODE
DO NOT insert a disc while the disc loading
lamp is flashing* or is not lit**.
* Flashing: while loading or ejecting a disc
**Not lit: when a disc has been loaded.
Before performing any operations, make sure
the following....
• Check the connection with the TV and with the
car receiver.
• Turn on the TV and the receiver.
• Select this unit (auxiliary or external input) as
the playback source on the receiver.
• Select the correct input where this unit is
connected.
4 Close the slot cover by hand.
The disc type is automatically detected and
the detected disc lamp (DVD, VCD/CD)
lights up, and playback starts automatically.
• It takes a while to detect the disc type.
DVD
/
VIDEO CD / CD
PHONES
DVD VCD/CD
• For DVD playback, you can change the
Setup Menu setting to your preference. (See
pages 20 – 28.)
Disc lamps
If “
”appears on the screen when
If a menu appears while playing a DVD or VCD
with PBC function, see “MENU-DRIVEN
PLAYBACK” on page 12.
pressing a button, the disc cannot accept an
operation you have tried to do.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop playback temporarily
Listening with headphones
Press 8 (STEP). A still picture appears while
playing a DVD or VCD.
1 Connect the headphones to the PHONES jack
on the unit.
• You can advance the still picture frame by
frame by pressing the button repeatedly. (See
page 18.)
2 While holding SHIFT (S), then press
H/P VOL 5 or H/P VOL ∞ to adjust the
headphones volume.
To resume playback, press 3.
DO NOT use the headphones while driving. It
is dangerous to shut off the outside sounds
while driving.
To stop playback
Press 7.
If you are playing back a DVD or
VCD, this unit can memorize the
end point (“7” appears for a while
on the screen), and when you start
playback again, playback begins from where it
has been stopped. (Resume play)
About sounds reproduced through the rear
terminals
• Through AUDIO (L/R):
Analog stereo signals are output.
When playing a source encoded with Dolby
Digital* (
) , multichannel signals are
To eject a disc
1 Press OPEN on the unit to open the slot cover.
mixed to the left and right front channel
signals, then output.
2
Press 0 on the unit (inside the slot cover).
The disc automatically comes out of the
loading slot.
–You cannot reproduce the sound encoded
with DTS Digital Surround** (
).
• Through DIGITAL OUT:
Digital signals (Linear PCM, Dolby Digital,
DTS Digital Surround) are output through this
terminal. (For more details, see page 35.)
To reproduce the multichannel sounds such
as Dolby Digital and DTS Digital Surround,
connect an amplifier or a decoder compatible
with these multichannel sources to this
terminal, and set “DIGITAL OUT” correctly.
(See page 22.)
To locate a particular chapter or track
You can move to another chapter or track while
playing a disc.
• Press ¢ to go ahead to the beginning of the
next track.
Each time you press the button consecutively,
the beginning of the next tracks is located and
played back.
• Press 4 to go back to the beginning of the
current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
If you press and hold the button, you can fast-
forward (by holding ¢) or fast-reverse the play
(by holding 4).
*
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992–1997
Dolby Laboratories. All rights reserved.
** Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents
issued and pending. “DTS” is a registered
trademark of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems, Inc.
All Rights Reserved.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
When a VCD or CD is loaded:
POWER SUBTITLE
AUDIO
ANGLE
OFF PBC
1/3
00:00:01
DISPLAY
*
DISPLAY (D)
TIME
D
TIME
On-screen bar goes off.
STEP
MENU
SETUP
H/P VOL
* This appears only while a VCD is loaded.
TITLE
ENTER
H/P VOL
RETURN
About the indications on the on-screen bar
Indications shown on the on-screen bar vary
depending on the disc type and the signals
recorded on the loaded disc.
SLOW
1
4
2
5
8
0
3
6
ZOOM
REPEAT
When a DVD is loaded
7
SHIFT
S
9
CLEAR
C
A-B RPT
SHIFT (S)
1/3
1/25
M
SEARCH MODE
00:00:01
1/1
1
2
3
4
5
Digital
OFF/0
ENG 1/1
OFF
6
7
8
9
Showing the on-screen bar
1 :Current title and the total number of the
titles on the disc.
(Ex.: 1st title is playing out of 3 titles
recorded.)
You can show the following information on the
screen while a disc is loaded.
2 :Current chapter and the total number of
the chapters recorded on the disc.
(Ex.: 1st chapter is playing out of 25
chapters recorded.)
To show the disc information, press DISPLAY
(D)/TIME.
Each time you press the button,
the following on-screen bar
appears in sequence.
DISPLAY
3 :Playing time or the remaining time.
(Ex.: Playing time of the title. See page 9
for more details.)
D
TIME
4 :Indicates whether the disc contains multi-
angle views.
When a DVD is loaded:
(Ex.: When only main angle-view is
recorded on the disc without any multi-
angle views. See page 11 for more
details.)
1/3
1/25
00:00:01
Digital
1/1
OFF/0
ENG 1/1
OFF
5 :Current operation mode.
(Ex.: This appears while playing a disc.)
On-screen bar goes off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the playing time
You can also show the elapsed playing time or
the remaining time.
6 :Indicates whether the disc contains
subtitles.
(Ex.: When no subtitle is recorded on the
disc. See page 10 for more details.)
To show the on-screen bar and to change the
playing time information, press DISPLAY (D)/
TIME while holding SHIFT (S).
7 :Current selected audio language and the
total number of the audio languages
recorded on the disc.
DISPLAY
SHIFT
(Ex.: “ENGLISH” is selected as the only
recorded audio language on the disc. See
page 11 for more details.)
and
D
TIME
S
8 :Sound mode — Linear PCM (stereo),
Dolby Digital, and DTS Digital Surround.
(Ex.: When the disc is encoded with Dolby
Digital.)
Each time you press the button, the playing time
information changes on the on-screen bar.
When a DVD is loaded
9 :Repeat play mode.
(Ex.: When Repeat play mode is set to
“OFF.” See page 16 for more details.)
-01:54:01
00:00:01
00:00:05
-00:34:09
When a VCD or CD is loaded
Elapsed playing time of the current title \
Remaining time of the current title \
Elapsed playing time of the current chapter \
Remaining time of the current chapter \
(Back to the beginning)
OFF PBC
1/3
00:00:01
*
1
2
3
4
5
* This appears only while a VCD is loaded.
When a VCD or CD is loaded
1 :Current track and the total number of the
tracks on the disc.
(Ex.: 1st track is playing out of 3 tracks
recorded.)
-00:04:41
00:00:01
2 :Playing time or the remaining time.
(Ex.: Playing time of the track. See the
right column for more details.)
00:00:05
-00:43:09
Elapsed playing time of the current track \
Remaining time of the current track \
Elapsed playing time of the current disc \
Remaining time of the current disc \
(Back to the beginning)
3 :Repeat play mode.
(Ex.: When Repeat play mode is set to
“OFF.” See pages 16 and 17 for more
details.)
4 :Appears only while loading a VCD.
Indicates whether the VCD is recorded
To erase the on-screen bar, press DISPLAY
(D)/TIME twice while playing a DVD, or once
while playing a VCD or CD.
with the PBC function (
).
) or without
(
(Ex.: When PBC function is recorded.)
• It is not required to hold down SHIFT (S) to
erase the on-screen bar.
5 :Current operation mode.
(Ex.: This appears while playing a disc.)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD PLAYBACK
Some DVDs contain several audio languages,
subtitles, and multi-angle views.
When you find the following marks on the DVD or
its package, you can select these elements
recorded on the DVD.
Subtitles are recorded on the
disc. The number inside the
mark indicates the total number
3
of the recorded subtitles.
Several audio languages are
recorded on the disc. The
number inside the mark
indicates the total number of
the recorded audio languages.
POWER SUBTITLE
AUDIO
ANGLE
3
ANGLE
AUDIO
SUBTITLE
DISPLAY
D
TIME
Multi-angle views are recorded
on the disc. The number inside
STEP
MENU
SETUP
the mark indicates the total
number of the recorded multi-
3
H/P VOL
angle views.
TITLE
ENTER
H/P VOL
RETURN
SLOW
1
4
2
5
8
0
3
6
Selecting subtitles
ZOOM
REPEAT
7
SHIFT
S
9
CLEAR
C
While playing a disc containing subtitles in
different languages, you can select the subtitle to
be displayed on the screen.
• You can set your favorite subtitle language as
the initial language shown on the screen. (See
page 21.)
A-B RPT
M
SEARCH MODE
Select a desired subtitle language.
The on-screen menu bar appears
on the screen. Each time you
SUBTITLE
press the button, the subtitle
language changes.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting multi-angle views
Ex.: When the disc has 3 selections —
English, French, Spanish and no subtitle (OFF)
Digital
OFF/3
ENG 1/3
OFF
While playing a disc containing multi-angle views,
you can view the same scene at different angles.
OFF/3
SPA/3
ENG/3
FRE/3
Select a desired view angle.
The on-screen menu bar appears
on the screen. Each time you
ANGLE
press the button, the view angle
changes.
To erase the on-screen bar, press DISPLAY
(D)/TIME.
Ex.: When the disc has 3 multi-angle views
1/3
3/25
00:00:01
1/3
Selecting audio languages
1/3
2/3
While playing a disc containing audio languages
(sound tracks), you can select the language
(sound) to listen to.
3/3
• You can set your favorite audio language as the
initial audio language shown on the screen.
(See page 20.)
1/3
3/25
00:00:01
1/3
1/3
3/25
00:00:01
2/3
Select a desired audio language (sound).
The on-screen menu bar appears
on the screen. Each time you
AUDIO
1/3
3/25
00:00:01
3/3
press the button, the audio
language changes.
Ex.: When the disc has 3 selections —
English, French, and Spanish
To erase the on-screen bar, press DISPLAY
(D)/TIME twice.
Digital
OFF/3
ENG 1/3
OFF
ENG 1/3
FRE 2/3
SPA 3/3
To erase the on-screen bar, press DISPLAY
(D)/TIME.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU-DRIVEN PLAYBACK
Menu operations
Menu-driven playback is possible while playing
back a DVD with menu-driven features or a VCD
with the PBC function.
While playing a DVD:
DVD discs generally have their own menus or title
lists. A Menu usually contains various information
about the disc and playback selections. On the
other hand, a title list usually contains titles of
movies and songs recorded.
POWER SUBTITLE
AUDIO
ANGLE
DISPLAY
1 Press MENU/SETUP or TITLE.
D
TIME
3
A menu or title list will appear on the screen.
STEP
MENU
SETUP
MENU
SETUP
MENU
TITLE
or
H/P VOL
Cursors
(5∞ 3 2)
SETUP
TITLE
ENTER
TITLE
H/P VOL
RETURN
ENTER
2 Select a desired item on the menu or
on the title list, using Cursor buttons
(5/∞/3/2) and ENTER.
SLOW
1
4
2
5
8
0
3
6
The unit starts playback of the selected item.
ZOOM
Numbers
REPEAT
H/P VOL
7
SHIFT
S
9
CLEAR
C
ENTER
A-B RPT
CLEAR
(C)
H/P VOL
M
SEARCH MODE
• On some discs, you can also select items
by pressing the Number buttons
corresponding to the item numbers listed.
To erase the menu or title list
Press RETURN
until it goes off from the
screen.
• If “
”appears on the screen when
pressing MENU in step 1, the disc does not
have a menu.
• If “
”appears on the screen when
pressing TITLE in step 1, the disc does not
have a title list.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
While playing a VCD:
PBC operation concept
The Playback Control function (PBC) allows you
to operate the VCD using menus.
When you start playback, a menu will
automatically appear on the screen.
• A menu may be a list of items, divided screens,
or some moving pictures. (See “PBC operation
concept” to the right.)
Select a desired item on the menu.
• When a list of items is displayed on the screen,
press the Number buttons to select an item.
• When “3” or “SELECT” is displayed on the
screen, press 3 (or ENTER if pressing 3 does
not work) to start playback.
How to select items using the Number
buttons
• To select number 5, press 5, then ENTER.
• To select number 10, press 1, 0, then
ENTER.
• To select number 23, press 2, 3, then
ENTER.
1
4
7
2
5
8
0
3
6
9
ENTER
• To cancel a mis-entry, press CLEAR (C).
Each time you press the button, the last
entry will be erased.
To return to the previous menu
Press RETURN
.
To cancel the PBC playback
You can cancel the menu-driven operations (PBC
function):
1 Press 7 to stop playback.
2
Press the Number buttons to select a track,
then press ENTER.
Normal playback starts from the selected
track.
• You can also turn on and off the PBC
playback by pressing MENU/SETUP
repeatedly.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH FUNCTIONS
Searching for a particular
point
You can search for a particular portion while
playing a disc — Forward/Reverse Search.
Forward Search
To fast-forward the chapter or track, press ¡
while playing a disc.
Each time you press the button,
the search speed changes
as follows:
POWER SUBTITLE
AUDIO
ANGLE
DISPLAY
D
TIME
STEP
MENU
SETUP
ENTER
(High Speed Search)
(Low Speed Search)
H/P VOL
TITLE
ENTER
1 ¡
(Normal Play)
H/P VOL
RETURN
When playing a DVD or VCD
• No sound comes out during High Speed Search.
• When Low Speed Search sound setting is “ON,”
sounds come out during Low Speed Search. (See
page 24.)
SLOW
1
4
2
5
8
0
3
6
ZOOM
Numbers
SHIFT (S)
REPEAT
7
SHIFT
S
9
CLEAR
C
Reverse Search
To reverse the chapter or track, press 1 while
playing a disc.
A-B RPT
SEARCH
MODE
(M)
M
SEARCH MODE
Each time you press the button,
the search speed changes
as follows:
CLEAR
(C)
(High Speed
(Low Speed
Reverse Search)
Reverse Search)
(Normal Play)
When playing a DVD or VCD
No sound comes out during Reverse Search.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a particular point
directly
2 Press the Number buttons then
ENTER to select a desired title,
chapter, track or playing time.
The unit starts playback of the selected item.
1
4
7
2
5
8
0
3
6
9
You can use the following Search Modes to
locate a particular portion directly while playing a
disc.
• For DVD: Title Search, Chapter Search, and
Time Search
ENTER
• For VCD and CD: Track Search and Time
Search
How to input the title, chapter, and track
number
Press the Number buttons corresponding to
the number, then press ENTER to start its
playback.
1 Press SEARCH MODE (M) to select
Search Mode.
The on-screen bar appears on the screen.
• To select number 5, press 5, then ENTER.
• To select number 10, press 1, 0, then
ENTER.
M
SEARCH MODE
• To select number 23, press 2, 3, then
ENTER.
When a DVD is playing:
--/25
--/3
--:--:--
How to input the playing time
Press the Number buttons to input the
playing time, then press ENTER to start
playback at the selected elapsed playing
time.
Time
Search*
Title
Search
Chapter
Search
Canceled
• To input time “00:45:23,” press 4, 5, 2, 3,
then ENTER.
When a VCD or CD is playing:
• To input time “01:23:45,” press 1, 2, 3, 4, 5,
then ENTER.
--/25
--:--:--
Time
Search*
Track
Search
• To cancel a mis-entry, press CLEAR (C).
Each time you press the button, the last
entry will be erased.
Canceled
* Time Search can be performed only within the
current title (for DVD) and the current track (for
VCD and CD).
To erase the on-screen bar, press DISPLAY
(D)/TIME.
When Search Mode is canceled
You can use the number buttons to directly select
the title number (for DVD) and track number (for
VCD and CD).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT PLAYBACK
Playing Repeatedly
Repeat Play
You can repeat a chapter, track, or disc.
To repeat playback, press REPEAT (
RPT while playing or pausing.
)/A-B
The on-screen bar appears.
Each time you press the button,
the repeat mode indication on the
on-screen bar changes as
follows:
REPEAT
POWER SUBTITLE
AUDIO
ANGLE
A-B RPT
DISPLAY
D
TIME
When a DVD is playing:
STEP
Chapter repeat
Title repeat
MENU
SETUP
H/P VOL
C
T
TITLE
ENTER
OFF
H/P VOL
RETURN
Repeat OFF
• Chapter repeat:Current chapter will be
repeated.
SLOW
1
4
2
5
8
0
3
6
• Title repeat:
Current title will be repeated.
ZOOM
REPEAT
• Repeat OFF: Repeat play is canceled.
REPEAT
A-B RPT
7
SHIFT
S
9
CLEAR
C
A-B RPT
* On some DVDs, repeat play may be canceled by the
disc itself.
SHIFT (S)
M
SEARCH MODE
When a VCD is playing:
Track repeat
Disc repeat
T
D
OFF
Repeat OFF
• Track repeat: Current track will be
repeated.
• Disc repeat:
All the tracks in the disc will
be repeated.
• Repeat OFF: Repeat play is canceled.
* While playing back a VCD using the PBC function,
Repeat play cannot be used.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
When a CD is playing*:
2 While holding SHIFT (S), press
REPEAT ( )/A-B RPT again to
select the end point.
Disc repeat
Track repeat
D
T
REPEAT
SHIFT
and
• Disc repeat:
All the tracks in the disc will
be repeated.
S
A-B RPT
• Track repeat: Current track will be
repeated.
The repeat mode indication changes as
follows, and A-B Repeat begins.
The unit automatically locates point A and
starts repeated playback of the portion
between points A and B.
* When you start playing back a CD, Disc repeat is
always activated first.
To erase the on-screen bar, press DISPLAY
(D)/TIME.
AB
Ex.: When viewing a picture
A-B Repeat
While playing, you can also select a portion you
want to repeat.
A-
• When playing a DVD, A-B Repeat is not
performed between different chapters or
different titles.
1 While holding SHIFT (S), press
REPEAT ( )/A-B RPT to select the
start point.
AB
To cancel A-B Repeat, press REPEAT (
RPT once while holding SHIFT (S).
)/A-B
REPEAT
SHIFT
and
S
To erase the on-screen bar, press DISPLAY
(D)/TIME.
A-B RPT
The on-screen bar appears, and the repeat
mode indication changes as follows:
If “
”appears on the screen when
)/A-B RPT in step 1,
pressing REPEAT (
A-B Repeat cannot be used on the selected
portion.
A-
• On some DVDs, A-B Repeat may not be
used even within the same chapter. This is
due to their disc structures, and not a
malfunction of the unit.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL EFFECTS PLAYBACK
Slow-Motion Playback
You can enjoy slow-motion playback while playing
a DVD or VCD.
To start Slow-motion Playback, press SLOW
while playing a DVD or VCD.
Each time you press the button,
the slow motion speed changes
as follows:
SLOW
1
1
1
/
2
/
4
/
8
1/16
POWER SUBTITLE
AUDIO
ANGLE
8 STEP
(Normal play)
DISPLAY
D
TIME
To resume normal play
STEP
Press SLOW repeatedly until normal play
resumes.
MENU
SETUP
H/P VOL
Cursors
TITLE
ENTER
(5∞ 3 2)
Frame-by-frame Playback
H/P VOL
RETURN
You can advance the picture frame by frame.
SLOW
SLOW
ZOOM
1
4
2
5
8
0
3
6
1 Press 8 STEP once during play.
A still picture appears on the
screen.
ZOOM
REPEAT
7
SHIFT
S
9
CLEAR
C
STEP
A-B RPT
M
SEARCH MODE
2 Press 8 STEP repeatedly to advance
the picture frame by frame.
Each time you press the button,
the picture advances frame by
frame.
STEP
To resume normal play
Press 3.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom
2 Move the enlarged portion on the
screen, using Cursor buttons (5/∞/
3/2).
You can zoom up a particular portion of the
picture while playing a DVD and VCD.
• You can select the start point of zoom and
adjust how precisely the zoomed-up portion is
moved. (See page 27.)
1 Press ZOOM to zoom in to the
picture.
2
Each time you press the button,
the picture is enlarged as follows:
ZOOM
2x Zoom
4x Zoom
To cancel Zoom, press ZOOM repeatedly until
normal size screen appears.
Canceled
2
2x Zoom
4
4x Zoom
Ex.: When 2x Zoom is selected
2
When playing a VCD
You can only select 2x Zoom.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD SETUP MENU
You can store the initial selection for subtitle
languages, audio languages (sound), and other
settings using the Setup Menu.
• DVD Setup menu can only be displayed while a
disc is not playing.
Setting initial audio language
You can select the initial language for audio
sound.
However, in the following cases, the original
language will be selected as the initial language
regardless of your setting.
POWER SUBTITLE
AUDIO
ANGLE
– If the language you have selected is not
recorded on the disc.
DISPLAY
– If the disc is programed to be played back in
the original language.
D
TIME
STEP
MENU
SETUP
MENU
SETUP
To go back to the previous screen during the
H/P VOL
procedure, press RETURN
.
TITLE
ENTER
Cursors
(5∞)
1 While holding SHIFT (S), press
MENU/SETUP.
H/P VOL
ENTER
RETURN
Setup Menu appears on the screen.
(“LANGUAGES” must be selected –
highlighted.)
SLOW
1
4
2
5
8
0
3
6
SETUP MENU
ZOOM
SHIFT
LANGUAGES
Numbers
SHIFT (S)
AUDIO
and
REPEAT
MENU
SETUP
S
DISPLAY
7
SHIFT
S
9
CLEAR
C
A-B RPT
CLEAR
(C)
RETURN
SELECT
ENTER OK
M
SEARCH MODE
2 Press ENTER.
Language menu appears. (“AUDIO” must be
selected – highlighted.)
LANGUAGES
AUDIO:
SUBTITLE:
DISC MENU:
ENGLISH
ENGLISH
ENGLISH
ENTER
RETURN
SELECT
ENTER OK
3 Press ENTER again.
Audio Language selecting screen appears.
AUDIO
ENGLISH
JAPANESE
GERMAN
SPANISH
FRENCH
HINDI
HUNGARIAN
ITALIAN
YIDDISH
ENTER
PORTUGUESE
RUSSIAN
CHINESE
ORIGINAL
OTHERS
0
RETURN
SELECT
ENTER OK
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
4 Press Cursor ∞ (or 5) to select a
desired language, then press
ENTER.
1 While holding SHIFT (S), press
MENU/SETUP.
Setup Menu appears on the screen.
(“LANGUAGES” must be selected –
highlighted.)
• To use the original
language on the disc,
select “ORIGINAL.”
H/P VOL
ENTER
SETUP MENU
H/P VOL
SHIFT
LANGUAGES
AUDIO
and
MENU
SETUP
S
DISPLAY
If a language you want is not listed on
the screen, follow the procedure below;
1 Press 5 or ∞ to select “OTHERS.”
RETURN
SELECT
ENTER OK
2 Press ENTER.
2
3
Press ENTER.
Press the Number buttons to enter the
language code number you want.
Language menu appears.
LANGUAGES
ENGLISH
•
See “LANGUAGE CODES” on page
30.
AUDIO:
ENTER
SUBTITLE:
ENGLISH
ENGLISH
DISC MENU:
Ex.: To select Finnish as the initial
language, press 7, 0, 7, 3, then
ENTER.
RETURN
SELECT
ENTER OK
• To cancel a mis-entry, press CLEAR (C).
Each time you press the button, the last
entry will be erased.
3 Press Cursor ∞ (or 5) to select
“SUBTITLE,” then press ENTER.
Subtitle Language selecting screen appears.
SUBTITLE
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
ENGLISH
JAPANESE
GERMAN
SPANISH
FRENCH
HINDI
HUNGARIAN
ITALIAN
H/P VOL
H/P VOL
YIDDISH
ENTER
PORTUGUESE
RUSSIAN
CHINESE
AUTO
RETURN
OTHERS
SELECT
0
Setting initial subtitle
language
ENTER OK
4 Press Cursor ∞ (or 5) to select a
desired language, then press
ENTER.
You can select the initial language for subtitles.
However, in the following cases, the original
language will be selected as the initial language
regardless of your setting.
– If the language you have selected is not
recorded on the disc.
• To use the same
H/P VOL
ENTER
language as the initial
audio language, select
“AUTO.”
H/P VOL
– If the disc is programed to be played back in
the original language.
If a language you want is not listed on
the screen, see the left column.
To go back to the previous screen during the
procedure, press RETURN
.
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
4 Press Cursor ∞ (or 5) to select a
desired language, then press
ENTER.
Setting initial disc menu
language
You can select the initial language for the disc
menu.
H/P VOL
ENTER
H/P VOL
However, in the following cases, the disc menu
will be displayed in the original language on the
disc regardless of your setting.
– If the language you have selected is not
recorded on the disc.
If a language you want is not listed on
– If the disc is programed to be played back in
the original language.
the screen, see page 21.
To go back to the previous screen during the
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
procedure, press RETURN
.
1 While holding SHIFT (S), press
MENU/SETUP.
Setting digital audio output
Setup Menu appears on the screen.
(“LANGUAGES” must be selected –
highlighted.)
When connecting an amplifier or a decoder to the
DIGITAL OUT terminal, set it as recommended –
STREAM, LPCM, or OFF (see step 3).
SETUP MENU
SHIFT
LANGUAGES
AUDIO
and
MENU
SETUP
To go back to the previous screen during the
S
DISPLAY
procedure, press RETURN
.
RETURN
SELECT
ENTER OK
1 While holding SHIFT (S), press
MENU/SETUP.
2 Press ENTER.
Language menu appears.
Setup Menu appears on the screen.
LANGUAGES
SETUP MENU
AUDIO:
SUBTITLE:
DISC MENU:
ENGLISH
ENGLISH
ENGLISH
SHIFT
LANGUAGES
ENTER
AUDIO
and
MENU
SETUP
S
DISPLAY
RETURN
SELECT
ENTER OK
RETURN
SELECT
ENTER OK
3 Press Cursor ∞ (or 5) to select
2 Press Cursor ∞ (or 5) to select
“DISC MENU,” then press ENTER.
“AUDIO,” then press ENTER.
Disc Menu Language selecting screen
Audio menu appears. (“DIGITAL OUT” must
be selected – highlighted.)
AUDIO
appears.
DISC MENU
ENGLISH
JAPANESE
GERMAN
SPANISH
FRENCH
HINDI
HUNGARIAN
ITALIAN
YIDDISH
DIGITAL OUT:
STREAM
H/P VOL
H/P VOL
PORTUGUESE
RUSSIAN
CHINESE
H/P VOL
H/P VOL
ENTER
COMPRESSION: STANDARD
ENTER
¡
AUDIO DURING
:
ON
OTHERS
0
RETURN
SELECT
ENTER OK
RETURN
SELECT
ENTER OK
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Setting compression
3 Press ENTER.
Digital Out selecting screen appears.
You can compress the dynamic range (difference
between the maximum and minimum sound
levels) while playing a source encoded with Dolby
Digital. This is useful when listening at a low
volume level.
DIGITAL OUT
ENTER
STREAM
LPCM
OFF
RETURN
SELECT
ENTER OK
To go back to the previous screen during the
procedure, press RETURN
.
4 Press Cursor ∞ (or 5) to select an
appropriate output, then press
ENTER.
1 While holding SHIFT (S), press
MENU/SETUP.
Setup Menu appears on the screen.
H/P VOL
ENTER
H/P VOL
SETUP MENU
SHIFT
LANGUAGES
AUDIO
and
MENU
SETUP
S
DISPLAY
• STREAM: Select this when connecting an
amplifier or a decoder
RETURN
SELECT
ENTER OK
compatible with Dolby Digital
and with DTS Digital Surround.
Select this when connecting an
amplifier or a decoder
incompatible with Dolby Digital.
Select this when you use the
AUDIO L/R (analog) jacks on
the rear.
2 Press Cursor ∞ (or 5) to select
“AUDIO,” then press ENTER.
Audio menu appears.
• LPCM:
• OFF:
AUDIO
DIGITAL OUT:
STREAM
H/P VOL
ENTER
COMPRESSION: STANDARD
H/P VOL
¡
AUDIO DURING
:
ON
Only with this setting, you
can enjoy original high-
quality sound of disc whose
sampling frequency is 96 kHz
through the AUDIO L/R jacks.
(No signal will be output from
the DIGITAL OUT terminal.)
RETURN
SELECT
ENTER OK
3 Press Cursor ∞ (or 5) to select
“COMPRESSION,” then press
ENTER.
Compression Rate selecting screen
appears.
COMPRESSION
For more detailed information about the output
signals, see page 35.
H/P VOL
H/P VOL
FULL
STNDARD
NIGHT
ENTER
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
RETURN
SELECT
ENTER OK
TO BE CONTINUED
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
4 Press Cursor ∞ (or 5) to select a
2 Press Cursor ∞ (or 5) to select
“AUDIO,” then press ENTER.
Audio menu appears.
desired setting, then press ENTER.
AUDIO
H/P VOL
ENTER
DIGITAL OUT:
STREAM
H/P VOL
H/P VOL
COMPRESSION: STANDARD
ENTER
H/P VOL
¡
AUDIO DURING
:
ON
RETURN
SELECT
ENTER OK
• FULL: Select this not to apply
compression (full dynamic range
as recorded on the original disc).
• STANDARD: Select this to reduce the
dynamic range a little.
3 Press Cursor ∞ (or 5) to select
“AUDIO DURING ¡,” then press
ENTER.
• NIGHT: Select this to apply compression
fully (useful at a low volume).
Sound on/off selecting screen appears.
¡
AUDIO DURING
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
H/P VOL
H/P VOL
ENTER
ON
OFF
RETURN
SELECT
ENTER OK
Setting audio output during
Low Speed Search
4 Press Cursor ∞ (or 5) to select a
desired setting, then press ENTER.
You can turn on or off the sound during Low
Speed Search on a DVD and VCD.
• Regardless of this setting, sound always comes
out during Low Speed Search on a CD.
H/P VOL
ENTER
H/P VOL
To go back to the previous screen during the
• ON:
Sounds come out during Low
Speed Search*.
procedure, press RETURN
.
• OFF: No sounds come out during Low
Speed Search.
1 While holding SHIFT (S), press
MENU/SETUP.
* Some sounds will be skipped during Low
Speed Search.
Setup Menu appears on the screen.
SETUP MENU
SHIFT
LANGUAGES
AUDIO
and
MENU
SETUP
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
S
DISPLAY
RETURN
SELECT
ENTER OK
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
• 4:3 LETTERBOX: Select this when
Setting monitor type
viewing on TV whose aspect ratio is 4:3.
While viewing a wide screen picture, the
black bars appear on the top and the
bottom of the screen.
Set the monitor type when you watch a wide
screen picture.
• This setting takes effect only when playing back
a DVD recorded with 16:9 wide screen video
signal.
To go back to the previous screen during the
procedure, press RETURN
.
1 While holding SHIFT (S), press
MENU/SETUP.
• 4:3 PAN-SCAN: Select this when viewing
on TV whose aspect ratio is 4:3. While
viewing a wide screen picture, the black
bars do not appear, however, the left and
right edge sides of the pictures will not be
shown on the screen.
Setup Menu appears on the screen.
SETUP MENU
SHIFT
LANGUAGES
AUDIO
and
MENU
SETUP
S
DISPLAY
RETURN
SELECT
ENTER OK
2 Press Cursor ∞ (or 5) to select
“DISPLAY,” then press ENTER.
Display menu appears. (“MONITOR TYPE”
must be selected – highlighted.)
• 16:9 WIDE: Select this when viewing on TV
whose aspect ratio is 16:9.
DISPLAY
MONITOR TYPE:
CLOSE CAPTION:
4:3 LB
OFF
H/P VOL
H/P VOL
ENTER
COLOR SCHEME: YELLOW
ZOOM SETUP
RETURN
SELECT
ENTER OK
3 Press ENTER.
Monitor type selecting screen appears.
• Even if “4:3 PAN-SCAN” is selected, the
screen size may become “4:3 LETTERBOX”
while playing some DVDs. This depends on
how the DVD is programed and recorded.
• If a disc (or some portions of the disc) is
recorded with the video signals of 4:3
aspect ratio, this setting does not take
effect. The pictures are displayed with full
4:3 aspect ratio or with 4:3 Letter box.
MONITOR TYPE
ENTER
4 : 3 LETTERBOX
4 : 3 PAN-SCAN
16 : 9 WIDE
RETURN
SELECT
ENTER OK
4 Press Cursor ∞ (or 5) to select a
desired setting, then press ENTER.
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
H/P VOL
ENTER
H/P VOL
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Setting closed caption
4 Press Cursor ∞ (or 5) to select a
desired setting, then press ENTER.
Some discs have closed captions.
You can set whether you will display the close
captions or not.
H/P VOL
ENTER
H/P VOL
• To show the closed captions on the TV, you
have to use a TV with a built-in closed-
caption decoder, or to connect a closed-
caption decoder in between this unit and a
TV.
• ON: Select this to display the close
captions when you start playback.
• OFF: Select this not to display the close
captions when you start playback.
To go back to the previous screen during the
procedure, press RETURN
.
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
1 While holding SHIFT (S), press
MENU/SETUP.
Setup Menu appears on the screen.
Changing the color of the
on-screen bar
SETUP MENU
SHIFT
LANGUAGES
AUDIO
and
MENU
SETUP
You can change the color of the on-screen bar
displayed on the top of the screen, by selecting
the color – yellow, green, blue, or red.
S
DISPLAY
RETURN
SELECT
ENTER OK
To go back to the previous screen during the
2 Press Cursor ∞ (or 5) to select
“DISPLAY,” then press ENTER.
Display menu appears.
procedure, press RETURN
.
DISPLAY
1 While holding SHIFT (S), press
MENU/SETUP.
MONITOR TYPE:
4:3 LB
OFF
H/P VOL
CLOSE CAPTION:
ENTER
Setup Menu appears on the screen.
H/P VOL
COLOR SCHEME: YELLOW
ZOOM SETUP
SETUP MENU
SHIFT
LANGUAGES
RETURN
SELECT
ENTER OK
and
MENU
SETUP
AUDIO
S
DISPLAY
3 Press Cursor ∞ (or 5) to select
“CLOSE CAPTION,” then press
ENTER.
RETURN
SELECT
ENTER OK
2 Press Cursor ∞ (or 5) to select
“DISPLAY,” then press ENTER.
Display menu appears.
Closed-caption on/off selecting screen
appears.
CLOSE CAPTION
DISPLAY
H/P VOL
MONITOR TYPE:
4:3 LB
OFF
OFF
ON
H/P VOL
ENTER
H/P VOL
CLOSE CAPTION:
ENTER
H/P VOL
COLOR SCHEME: YELLOW
ZOOM SETUP
RETURN
SELECT
ENTER OK
RETURN
SELECT
ENTER OK
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
3 Press Cursor ∞ (or 5) to select
“COLOR SCHEME,” then press
ENTER.
Setting zoom preference
You can change the zoom setting to your
preference – where to start the zoom and how to
move the zoomed-up portion.
COLOR SCHEME
H/P VOL
YELLOW
To go back to the previous screen during the
GREEN
BLUE
RED
ENTER
H/P VOL
procedure, press RETURN
.
RETURN
SELECT
ENTER OK
1 While holding SHIFT (S), press
MENU/SETUP.
4 Press Cursor ∞ (or 5) to select a
desired color, then press ENTER.
Setup Menu appears on the screen.
SETUP MENU
SHIFT
H/P VOL
LANGUAGES
ENTER
H/P VOL
AUDIO
and
MENU
SETUP
S
DISPLAY
RETURN
SELECT
ENTER OK
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
2 Press Cursor ∞ (or 5) to select
“DISPLAY,” then press ENTER.
Display menu appears.
DISPLAY
MONITOR TYPE:
4:3 LB
OFF
H/P VOL
ENTER
CLOSE CAPTION:
H/P VOL
COLOR SCHEME: YELLOW
ZOOM SETUP
RETURN
SELECT
ENTER OK
3 Press Cursor ∞ (or 5) to select
“ZOOM SETUP,” then press ENTER.
Zoom Setup screen appears. (“START
POINT” must be selected – highlighted.)
ZOOM SETUP
H/P VOL
START POINT: CENTER
ENTER
H/P VOL
PAN SCALE:
NORMAL
RETURN
SELECT
ENTER OK
TO BE CONTINUED
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
4 Press ENTER again.
Start Point selecting screen appears.
ZOOM START POINT
7 Press Cursor ∞ (or 5) to select a
desired setting, then press ENTER.
You can select the movement amount
(speed) of the zoomed-up portion.
MENU
UPPER LEFT
CENTER
LAST POINT
SETUP
H/P VOL
ENTER
H/P VOL
RETURN
SELECT
ENTER OK
5 Press Cursor ∞ (or 5) to select a
desired setting, then press ENTER.
• NORMAL:Select this to move at normal
speed to another portion of the
picture.
You can select the start point of zoom.
H/P VOL
• ROUGH: Select this to move faster to
another portion of the picture.
(Rough movement)
ENTER
H/P VOL
• FINE:
Select this to move slower to
another portion of the picture.
(Fine movement)
• UPPER LEFT: When you press ZOOM,
the upper left portion of the picture is
zoomed up first.
• CENTER: When you press ZOOM, the
center portion of the picture is
zoomed up first.
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
• LAST POINT: When you press ZOOM, the
last zoomed-up portion of the picture
is zoomed up.
6 Press Cursor ∞ (or 5) to select “PAN
SCALE,” then press ENTER.
Pan Scale selecting screen appears.
ZOOM PAN SCALE
H/P VOL
NORMAL
ROUGH
FINE
ENTER
H/P VOL
RETURN
SELECT
ENTER OK
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Moisture condensation
Moisture may condense on the lens inside the
unit in the following cases:
Handling discs
How to handle discs
When removing a disc from its case, press down
the center holder of the case and lift the disc out,
holding it by the edges.
• Always hold the disc by the edges. Do not
touch its recording surface.
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In
this case, eject the disc and leave the unit turned
on for a few hours until the moisture evaporates.
Center holder
When storing a disc into
its case, gently insert the
disc around the center
holder (with the printed
surface facing up).
• Make sure to store
discs into the cases after use.
CAUTIONS:
• Do not insert 8 cm discs (single discs) into the
loading slot. (Such discs cannot be ejected.)
• Do not insert any disc of unusual shape — like a
heart or flower; otherwise, it will cause a
malfunction.
• Do not expose discs to direct sunlight or any
heat source or place them in a place subject to
high temperature and humidity. Do not leave
them in a car.
To keep discs clean
A dirty disc may not play
correctly. If a disc does
become dirty, wipe it with a
soft cloth in a straight line
from center to edge.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
To play new discs
New discs may have some
rough spots around the
inner and outer edges. If
such a disc is used, this
unit may reject the disc.
To remove these rough
spots, rub the edges with
a pencil or ball-point pen, etc.
About mistracking:
Mistracking may result from driving on extremely
rough roads. This does not damage the unit and the
disc, but will be annoying.
We recommend that you stop disc play while
driving on such rough roads.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODES
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8571
8575
8582
8590
8673
8679
8779
8872
8979
9065
9072
9085
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
7375
7378
7383
7384
7385
7387
Afar
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
Japanese
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Yiddish
Javanese
Georgian
Kazakh
Greaenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Telugu
Tajik
Thai
Bislama
Bengali; Bangla
Tibetan
Latin
Lingala
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Uigur
Ukrainian
Urdu
Uzbek
Laothian
Lithuainnian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Vietnamese
Volapuk
Wolof
Xhosa
Dutch
Norwegian
Occitan
Afan Oromo
Oriya
Punjabi
Yoruba
Zhuang
Chinese
Zulu
Fiji
Faeroese
French
Frisian
Irish
Polish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Pashto, Pushto
Portuguese
Ouechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinya, Rwanda
Sanskrit
Hindi
Croatian
Hungarian
Armenian
Interlingua
Knupiak
Indonesian
Icelandic
Italian
Sindhi
Sangro
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Inuktitut (Eskimo)
Hebrew
30
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
DTS Digital Surround
4:3 Letterbox Screen
This is one method for displaying a wide screen
picture on a conventional sized (4:3) TV. While
viewing a wide screen picture, the black bars
appear on the top and the bottom of the screen.
Another discrete 5.1 channel digital audio format,
available on CD, LD, and DVD software,
developed by Digital Theater Systems, Inc.
Compared to Dolby Digital, audio compression
rate is relatively low. This fact allows DTS Digital
Surround format to add breadth and depth to the
reproduced sounds. As a result, DTS Digital
Surround features natural, solid and clear sound.
To reproduce these surround signals, you need to
connect an amplifier or a decoder compatible
with DTS Digital Surround.
4:3 Pan-Scan Screen
This is one method for displaying a wide screen
picture on a conventional sized (4:3) TV. While
viewing a wide screen picture, the left and right
edges of the pictures will not be shown on the
screen.
Linear PCM
This is a digital recording format that is used for
audio CDs.
Playback Control (VCD)
When a VCD has the PBC (Playback Control)
function, you can enjoy menu-driven operations
and high-resolution still pictures.
Sampling Frequency, Quantization Bits
When analog signals are converted into digital
signals, they are divided into many points and
digitized. This dividing method is called
“sampling.” The sampling frequency indicates
how many points one second is divided into – for
example, for CD sound, one second is divided
into 44100 points since its sampling frequency is
44.1 kHz. On the other hand, the number of
quantization bits indicates the volume size used
to memorize each divided point.
Dolby Digital
This is a digital audio compression technology
that was developed by Dolby Laboratories. Dolby
Digital encoding method (so-called discrete 5.1
channel digital audio format) records and
compresses the left front channel, right front
channel, center channel, left rear channel, right
rear channel, and LFE channel (total 6 channels,
but LFE channel is counted as 0.1 channel,
therefore called 5.1 channels) signals digitally.
Each channel is completely independent from
other channel signals to avoid interference,
therefore, you can obtain much better sound
quality with stereo and surround effects.
The larger this number is, the clearer the sound
can be reproduced.
Titles and Chapters (DVD)
A DVD is divided into several titles (large
divisions), and each title is divided into chapters
(smaller divisions).
These divisions are assigned their particular
numbers, so that they are easily accessed.
To reproduce these original surround signals, you
need to connect an amplifier or a decoder
compatible with Dolby Digital.
Tracks (VCD, CD)
VCDs and CDs are divided into tracks. Each
track has its own number so that it is easily
accessed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF THE BUTTONS
Remote controller
1 POWER
(standby/on) button
8
9
POWER SUBTITLE
AUDIO
ANGLE
2 Disc operation buttons
1
7 (stop), 8 (pause) STEP, 3 (play)
DISPLAY
p
q
2
3
D
TIME
3 4 / ¢ (reverse search/forward search)
STEP
buttons
MENU
SETUP
w
e
4 Menu operation buttons
H/P VOL
5 / ∞ / 2 / 3 (cursors), ENTER
• 5 / ∞ also function as H/P VOL
(headphones volume) buttons while
pressed with SHIFT (S) button.
TITLE
ENTER
4
5
H/P VOL
RETURN
r
t
y
u
5 1 / ¡ (reverse/fast forward) buttons
6 Number buttons
SLOW
1
4
2
5
8
0
3
6
ZOOM
7 SHIFT (S) button
6
7
REPEAT
8 AUDIO
button
button
7
SHIFT
S
9
CLEAR
C
A-B RPT
9 ANGLE
p SUBTITLE
M
SEARCH MODE
i
o
button
q DISPLAY (D)/TIME button
• Also functions as TIME button while
pressed with SHIFT (S) button.
w MENU/SETUP button
• Also functions as SETUP button while
pressed with SHIFT (S) button.
e TITLE button
r RETURN
button
t SLOW button
y ZOOM button
u REPEAT
/A-B RPT button
• Also functions as A-B RPT button while
pressed with SHIFT (S) button.
i SEARCH MODE (M) button
o CLEAR (C) button
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel
1
2
3
4
5
OPEN
PHONES
DVD VCD/CD
6
7
8
9
p
q
w
e
r t
1 Slot cover
2 Disc loading lamp
9 Remote signal reception lamp
This lamp flashes when receiving the
remote control signals.
This lamp goes off when the disc type is
detected.
p 3 (play) button and lamp
The lamp lights up when the power is on.
3 Loading slot
4 0 (eject) button
5 OPEN button
6 PHONES jack
q 7 (stop) button and lamp
The lamp lights up when the power is on.
w 4 (reverse search) button and lamp
The lamp lights up when the power is on.
7
(standby/on) button and lamp
The lamp always lights up when the
ignition key is on.
e ¢ (forward search) button and lamp
The lamp lights up when the power is on.
r Reset button
8 Disc lamps (DVD, VCD/CD)
These lamps indicate the type of the disc
loaded.
t Remote sensor
33
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• Playback cannot start after
inserting a disc.
The disc is inserted upside
down.
Insert the disc correctly.
• Sound and picture are
sometimes interrupted or
distorted.
You are driving on rough roads.
Stop playing a disc while driving
on rough roads.
The disc is scratched.
Change the disc.
Connections are incorrect.
Check the cords and
connections.
The volume is turned to the
minimum level.
Adjust it to the optimum level.
• Sound cannot be heard from
the speakers.
Connections are incorrect.
Check the cords and
connections.
You are playing a disc with DTS This unit cannot output DTS
Digital Surround.
sound without connecting a
decoder compatible with DTS
Digital Surround.
• No picture appears on the
screen.
The video cord is not connected Connect the video cord
correctly.
correctly.
An incorrect input has been
selected on the TV or monitor.
Select a correct input on the TV
or monitor.
• The left and right edges of the
picture are missing on the
screen.
“4:3 PAN-SCAN (PS)” is
selected when viewing on a
conventional TV (aspect ratio
4:3).
Select “4:3 LETTERBOX (LB).”
(See page 25.)
• No subtitle appears on the
display though you have
selected the initial subtitle
language.
Some DVDs are programed to
always display no subtitle
initially. If this happens, press
SUBTITLE
after starting
play.
• Audio language is different
from the one you have
selected as the initial audio
language.
Some DVDs are programed to
always use the original
language initially.
If this happens, press AUDIO
after starting play.
• Disc can be neither played
back nor ejected.
Turn off the power, then turn it
again.
The built-in microcomputer may
function incorrectly due to noise,
etc.
The built-in microcomputer may
function incorrectly due to noise,
etc.
• This unit does not work at all.
Press the reset button to reset
the unit. (See page 2.)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO SECTION
GENERAL
Frequency Response:
Power Requirement:
DVD, fs=48 kHz: 16 Hz to 22 000 Hz
DVD, fs=96 kHz: 16 Hz to 44 000 Hz
Operating Voltage: DC 14.4 V
(11 V to 16 V allowance)
VCD, CD:
Dynamic Range:
Signal-to-Noise Ratio: 95 dB
16 Hz to 20 000 Hz
93 dB
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C
Pickup wave length:
Wow and Flutter:
650 nm
Less than measurable
limit
(32°F to 104°F)
Dimensions (W x H x D):
Unit Size:
Audio output level:
Analog (AUDIO L/R): 1.5 Vrms
Digital (DIGITAL OUT):
178 mm x 50.5 mm x 167 mm
(7-1/16" x 2" x 6-5/8")
Installation Size:
Signal wave length: 660 nm
182 mm x 52 mm x 150 mm
(7-3/16" x 2-1/16" x 5-15/16")
Panel Size: 188 mm x 58 mm x 13.4 mm
(7-7/16" x 2-5/16" x 9/16")
Mass: 1.4 kg (3.1 lbs) (excluding accessories)
Output level:
–21 dBm to –15 dBm
VIDEO SECTION
Color system:
Video output (composite):1 Vp-p/75 Ω
NTSC
Design and specifications subject to change without
notice.
If a kit is necessary for your car, consult a
telephone directory for the nearest car audio
speciality shop.
Output signals through the DIGITAL OUT terminal
They differ depending on the “DIGITAL OUT” setting on the Setup Menu.
Output Signals
DIGITAL OUT
STREAM
Playback Disc
LPCM
OFF
DVD 48 kHz, Linear PCM
48 kHz, Linear PCM
48 kHz, Linear PCM
None
96 kHz, Linear PCM
48 kHz, Linear PCM
Dolby Digital bitstream
DTS bitstream
48 kHz, Linear PCM
Down mix (2 channels)
None
None
None
None
with Dolby Digital
with DTS Digital Surround
Video CD, Audio CD
Auido CD with DTS
44.1 kHz, 16 bit Linear PCM
DTS bitstream
44.1 kHz, 16 bit Linear PCM None
DTS bitstream None
35
Download from Www.Somanuals.com. All Manuals Search And Download.
.jvcmobile.com
Visit us on-line for
Technical Support & Customer Satisfaction Survey.
US RESIDENTS ONLY
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to Reset
Still having trouble??
USA ONLY
Call 1-800-252-5722
We can help you!
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Japan
EN, SP, FR
J
C
V
0201MNMMDWOZK
Download from Www.Somanuals.com. All Manuals Search And Download.
|