CD/CASSETTE RECEIVER
RECEPTOR DE CD-CASSETTE
RADIOCASSETTE/CD
KW-XC770
KW-XC770
KW-XC770
/
ATT
SCM
DIRECT
SOURCE
SELECT
C
D
ATT
BAND
PROG
DISC
FUNC
FM/AM
TAPE
DISC
PRESET
SSM
KW-XC770
MULTI MODE SPECTRUM ANALYZER
40Wx4
SCM
CD-CH
DOLBY
B
NR
CD CHANGER CONTROL
SEL
COMPACT
7
8
9
10
11
12
RPT
MO
RND
SCAN
EX
B.SKIP
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Model No.
Serial No.
LVT0400-001A
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
BASIC OPERATIONS....................................................5
RADIO OPERATIONS...................................................6
Listening to the radio ..................................................................... 6
Storing stations in memory ............................................................ 7
Automatic preset: SSM................................................................ 7
Manual preset.............................................................................. 8
Storing your favorite station into the EX (extra) button ................ 9
Tuning into a preset station ......................................................... 10
Other convenient tuner functions................................................ 11
Scanning broadcast stations ......................................................11
Selecting FM reception sound.................................................... 11
Changing the AM/FM channel intervals ..................................... 11
CD OPERATIONS.......................................................12
Playing a CD ................................................................................. 12
Locating a track or a particular portion on a CD ..................... 13
Fast-forwarding or reversing the track ........................................ 13
Going to the next track or the previous track.............................. 13
Going to a particular track directly ............................................. 13
Other convenient CD functions ................................................... 14
Selecting CD playback modes ...................................................14
Prohibiting CD ejection.............................................................. 14
TAPE OPERATIONS....................................................15
Listening to a tape ........................................................................ 15
Finding the beginning of a tune................................................... 17
Other convenient tape functions.................................................. 18
Skipping blank portions on the tape ........................................... 18
Playing the current tune repeatedly ........................................... 18
Prohibiting tape ejection ............................................................ 18
SOUND ADJUSTMENTS .............................................19
Selecting preset sound modes ...................................................... 19
Adjusting the sound ...................................................................... 20
Storing your own sound adjustments ......................................... 21
SPECTRUM ANALYZER ..............................................22
Selecting spectrum analyzer patterns ......................................... 22
Spectrum analyzer patterns .......................................................23
CONTINUED TO THE NEXT PAGE
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER MAIN FUNCTIONS .........................................24
Changing general settings (PSM)................................................ 24
Setting the clock ........................................................................ 24
Turning on or off the key-touch tone........................................... 25
Selecting the dimmer mode .......................................................25
Selecting the external component to use ...................................26
Turning on or off the display demonstration ............................... 26
REMOTE OPERATIONS...............................................27
Installing the batteries.................................................................. 27
Using the remote controller ......................................................... 28
CD CHANGER OPERATIONS ......................................29
Playing CDs ................................................................................... 29
Selecting CD playback modes...................................................... 31
EXTERNAL COMPONENT OPERATIONS ..................... 32
MAINTENANCE.........................................................33
Handling cassettes ........................................................................ 33
Handling CDs................................................................................ 34
TROUBLESHOOTING .................................................35
SPECIFICATIONS .......................................................37
BEFORE USE
* For safety....
* Temperature inside the car....
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Note:
When you use this unit for the first
time, set the built-in clock correctly,
see page 24.
1
3
2
1
2
/
Turn on the power.
ATT
“HELLO” appears on the display.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
C D
Select the source.
To operate the tuner, see pages 6 – 11.
To operate the CD player, see pages 12 – 14.
To operate the tape deck, see pages 15 – 18.
To operate the CD changer, see pages 29 – 31.
To operate an external device, see page 32.
FM/AM
TAPE
CD-CH
3
4
To turn up the Adjust the volume.
volume
SEL
To turn down
the volume
Volume level
Clock time
Adjust the sound as you want (see pages 19 – 21).
• If you need to change the spectrum analyzer pattern, see page 22.
To drop the volume in a moment
Press
briefly while listening to any source.“ATT” starts flashing on the display, and
ATT
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
for more than 1 second. “SEE YOU” appears, then the unit turns off.
ATT
• If you turn off the ignition key without turning off this unit, the unit will automatically turn on
when you turn on the ignition key next time. If the last selected source is ready for playback
(ex. a CD or a tape is in the unit), playback starts automatically.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO OPERATIONS
Listening to the radio
1
2
1
FM/AM
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
ANA
FM1
FM2
FM3
AM
2
Start searching a station.
When a station is received, searching stops.
ANA
To search stations of
higher frequencies
SSM
To search stations of
lower frequencies
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold ¢
Now you can manually change the frequency while “MANU” is flashing.
repeatedly until the frequency you want is reached.
or 4
until “MANU” flashes on the display.
3 Press ¢
or 4
• If you hold down the button, the frequency keeps changing until you release the button.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing stations in memory
You can use one of the following methods to store broadcasting stations in memory.
• Automatic preset: SSM (Strong-station Sequential Memory)
• Manual preset
• Storing your favorite station into the EX button
Automatic preset: SSM
You can preset 6 local stations in each FM band (FM1, FM2, and FM3) and 6 local stations in
AM band.
1
2
1
2
FM/AM
Select the band (FM1, FM2, FM3 or AM).
FM1
FM2
FM3
AM
Press and hold both buttons for more than 2
seconds.
SSM
ANA
“SSM” appears, then disappears when automatic
preset is over.
Local stations with the strongest signals are searched and stored automatically in the band
you have selected (FM1, FM2, FM3, or AM).These stations are preset in the number buttons
— No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset channel number 1 of the FM1
band
1
2
3
1
2
FM/AM
Select the FM1 band.
ANA
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
SSM
ANA
3
Press and hold the button (in this example,
number 1 button) until channel number flashes
(in this example “1ch”).
ANA
ANA
\
“1ch” flashes for a few seconds,
showing that the station has been preset.
4
Repeat the above procedure to store other stations into other
preset channel numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset channel number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing your favorite station into the EX (extra) button
You can preset an FM or AM station (such as your favorite station or traffic announcement
station); and recall it by one touch operation even if the unit is turned off.
EXAMPLE: Storing an FM station of 88.3 MHz into the EX button
1
1
2
1
2
Follow the steps 1 and 2 on page 6.
EX
Press and hold the button until “FM” flashes.
ANA
“FM” flashes on the display, showing that the station
has been preset.
Notes:
• A previously preset station is erased when a new station is stored.
• Preset station is erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the station again.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 7 to
9.
1
SCM
SEL
7
8
9
10
11
12
EX
2
1
2
Select the band (FM1, FM2, FM3 or AM) you
want.
FM/AM
FM1
FM2
FM3
AM
Select the number (1 – 6) for the preset station
you want.
To tune in the favorite station (EX)
The unit automatically turns on (if it has been off).
EX
Your favorite station is tuned in, and the volume level is
automatically set to the one when this function has been
used before.
• If you press the button again, the previous source will be played
back again at the previous volume level.
Note:
If you adjust the volume while this function is in use, it is automatically stored for this function.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenient tuner functions
¢
4
SEL
RPT MO
Control dial
SCAN Ÿ
Scanning broadcast stations
When you press SCAN Ÿ (Scan/Dolby NR) while listening to the radio,
station scanning starts. (“SCAN” appears on the display.) Each time a
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency
number flashes on the display), and you can check what program is now
being broadcasted.
SCAN
If you want to listen to that program, press the same button again to stop
scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press RPT MO (Repeat/Monaural) while listening to an FM stereo broadcast.The sound you
hear becomes monaural but reception will be improved.
Lights up when receiving an FM broadcast in stereo.
RPT
MO
ANA
To restore the stereo effect, press the same button again.
Changing the AM/FM channel intervals
When this unit is shipped from the factory, the channel intervals are set to 10 kHz for AM and
200 kHz for FM (so that the unit can be used in North and South America).
When using this unit in an area other than North and South America, change the channel
intervals by following the procedure below.
• AREA EU: Select this when used in an area other than North and South America.
• AREA US: Select this when used in North or South America.
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “PSM AREA” does not appear, press ¢
3 Turn the control dial to the right.
or 4
repeatedly until it appears.
“AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for
manual tuning) / 100 kHz (for searching) for FM.
4 Press SEL again to finish the setting.
To reset to the factory setting, follow the above step 1 and 2, then turn the control dial to the
left in step 3 (“AREA US” appears on the display).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OPERATIONS
Playing a CD
1
0
1
Insert a disc into the loading slot.
The unit turns on, draws a CD and starts playback
automatically.
• Insert the CD with the printed face facing upside.
Total track number Total playing time of
of the inserted disc the inserted disc
Lights up
ANA
ANA
\
Elapsed playing time
Current track
ANA
\
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback
automatically.
To stop play and eject the CD
Press 0.
CD play stops and the CD automatically ejects from the loading slot (“CD EJECT” appears on
the display). The source changes to the last selected source.
If you change the source, the CD play also stops (without ejecting the CD this time).
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
• You can eject the CD even when the unit is turned off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a track or a particular portion on a CD
¢
4
SCM
SEL
7
8
9
10
11
12
Number buttons
Fast-forwarding or reversing the track
Press and hold ¢
while playing a CD, to fast-forward the track.
SSM
Press and hold 4
while playing a CD, to reverse the track.
Going to the next tracks or the previous tracks
Press ¢
briefly while playing a CD, to go ahead to the beginning of
the next track. Each time you press the button consecutively, the beginning
of the next tracks is located and played back.
SSM
Press 4
briefly while playing a CD, to go back to the beginning of the
current track. Each time you press the button consecutively, the beginning
of the previous tracks is located and played back.
Going to a particular track directly
7
8
9
10
11
12
Press the number button corresponding to the track number to start its
playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenient CD functions
0
CD
SCM
SEL
7
8
9
10
11
12
RPT MO
RND B.SKIP
Selecting CD playback modes
7 To play back tracks at random (Random Play)
You can play back all tracks on the CD at random.
RND
B.SKIP
Each time you press RND B.SKIP (Random/Blank Skip) while playing a
CD, CD random play mode turns on (“RANDOM ON”) and off (“RANDOM
OFF”) alternatively.
When the random mode is turned on, the RND indicator lights up on the
display and a track randomly selected starts playing.
7 To play back tracks repeatedly (Repeat Play)
You can play back the current track repeatedly.
Each time you press RPT MO (Repeat/Monaural) while playing a CD, CD
RPT
MO
repeat play mode turns on (“REPEAT ON”) and off (“REPEAT OFF”)
alternatively.
When the repeat mode is turned on, the RPT indicator lights up on the
display.
Prohibiting CD ejection
You can prohibit the CD ejection and can “lock” a CD in the loading slot.
Press and hold CD and 0 for more than 2 seconds.“CD EJECT” appears,
then “EJECT” flashes on the display for about 5 seconds, and the CD is
“locked.”
C D
To cancel the prohibition and “unlock” the CD, press and hold CD
and 0 for more than 2 seconds again.“CD EJECT” appears, then “EJECT”
flashes on the display for about 5 seconds, and the CD is “unlocked.”
(at the same time)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TAPE OPERATIONS
Listening to a tape
¢
4
3
SCM
0
1
SEL
7
8
9
10
11
12
2
1
Insert a cassette.
The unit turns on and tape play starts automatically.
When one side of the tape reaches its end during play, the
other side of the tape automatically starts playing. (Auto
Reverse)
Note on One-Touch Operation:
When a cassette is already in the cassette compartment, pressing TAPE 2 3 turns on the
unit and starts tape play automatically.
2
3
Turn on or off the Dolby B NR* as needed.
SCAN
Each time you press the button, the Dolby B NR turns on (“DOLBY
B ON”) and off (“DOLBY B OFF”).
ANA
This indicator lights up when the Dolby B NR is turned on.
TAPE
Select the tape direction.
Each time you press the button, the tape direction changes
alternatively.
ANA
ANA
j
* Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation. “Dolby” and the double-D symbol Ÿ are trademarks of Dolby Laboratories
Licensing Corporation.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop play and eject the cassette
Press 0.
Tape play stops and the cassette automatically ejects from the cassette compartment.
If you change the source, the tape play also stops (without ejecting the cassette this time).
• You can also eject the cassette with the unit turned off.
To fast-forward and rewind a tape
• Press ¢
for more than 1 second to fast-forward the tape.
Tape direction
ANA
When the tape reaches its end, the tape is reversed and playback starts from the beginning
of the other side.
• Press 4
for more than 1 second to rewind the tape.
Tape direction
ANA
When the tape reaches its end, playback of the same side starts.
To stop fast-forward and rewind at any position on the tape, press TAPE 2 3.
Tape play starts from that position on the tape.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding the beginning of a tune
Multi Music Scan allows you to automatically start playback from the beginning of a specified
tune. You can specify up to 9 tunes ahead or before the current tune.
1
1
During playback
Specify where (how many tunes
ahead of or before the current tune)
the tune you want is located.
To locate a tune ahead
of the current tune on
SSM
ANA
the tape
To locate a tune before
the current tune on the
tape
Each time you press the button, the number
changes up to ±9.
When the beginning of the specified tune is located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other
side.
• In the following cases, Multi Music Scan may not operate correctly.
– Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions
during tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between tunes.
– The Dolby NR setting does not match. For example, if the tape is recorded with the Dolby C NR.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenient tape functions
TAPE 2 3
SCM
0
SEL
7
8
9
10
11
12
RPT MO
RND B.SKIP
Skipping blank portions on the tape
You can skip blank portions between the tunes. (Blank Skip)
Each time you press RND B.SKIP (Random/Blank Skip) while playing a
tape, the blank skip function turns on and off alternatively.
RND
B.SKIP
When this function is on, the B.SKIP indicator lights up on the display and
the unit skips blank portions of 15 seconds or more, fast-forwards to the
next tune, then starts playing it.
• When the tape reaches its end while fast-forwarding, the tape direction will be
changed automatically.
Playing the current tune repeatedly
You can play the current tune repeatedly. (Repeat Play)
RPT
MO
Each time you press RPT MO (Repeat/Monaural) while playing a tape,
repeat play turns on and off alternatively. When this function is on, the RPT
indicator lights up on the display.
• Repeat play will be canceled when you change the source or turn off the unit.
Prohibiting tape ejection
You can prohibit the tape ejection and can “lock” a tape in the cassette
TAPE
compartment.
Press and hold TAPE 2 3 and 0 for more than 2 seconds. “TAPE EJECT”
appears, then “EJECT” flashes on the display for about 5 seconds, and the
tape is “locked.”
To cancel the prohibition and “unlock” the tape, press and hold TAPE
2 3 and 0 for more than 2 seconds again. “TAPE EJECT” appears, then
“EJECT” flashes on the display for about 5 seconds, and the tape is
“unlocked.”
(at the same time)
Note:
In the following cases, Blank Skip and Repeat Play may not operate correctly.
– Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between tunes.
– The Dolby NR setting does not match. For example, if the tape is recorded with the Dolby C NR.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND ADJUSTMENTS
Selecting preset sound modes
You can select a preset sound adjustment suitable to the music genre.
1
SEL
7
8
9
10
11
12
1
Select the sound mode you want.
Each time you press the button, the sound mode changes
as follows.
SCM
Indication
For:
Preset values
Bass
00
Treble
00
Loudness
SCM OFF
BEAT
(Flat sound)
On
On
Off
Off
Rock or disco music
Quiet background music
Light music
+2
00
SOFT
+1
–3
POP
+4
+1
Notes:
• You can adjust the preset sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 21.
• To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily,
see “Adjusting the sound” on page 20.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
You can adjust the sound characteristics to your preference.
LOUD indicator
1
2
1
Select (“SEL”) the item you want to adjust.
SEL
Indication
To do:
Adjust the bass
Range
BAS
–6 (min.) — +6 (max.)
(Bass)
TRE
Adjust the treble
–6 (min.) — +6 (max.)
(Treble)
FAD
(Fader)*
Adjust the front and rear speaker
balance
R6 (rear only) — F6 (front only)
L6 (left only) — R6 (right only)
BAL
Adjust the left and right speaker
(Balance) balance
LOUD
Turn on or off the loudness function** ON — OFF
(Loudness)
VOL
Adjust the volume
00 (min.) — 50 (max.)
(Volume)
Notes:
* If you are using a two-speaker system, set the fader level to “00.”
** The loudness function can boost low and high frequencies to produce a well-balanced sound at
low volume levels. When the loudness function is “ON,” the LOUD indicator changes from
to
on the display.
2
Adjust the level.
Note:
SEL
Normally the control dial works for volume adjustment. So you do
not have to select “VOL” to adjust the volume level.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 19) to your preference and
store your own adjustments in memory.
1, 4
2
3
1
SCM
Call up the sound mode you want to adjust.
See page 19 for details.
Within
5 seconds
2
Select “BAS (bass),” “TRE (treble)” or “LOUD
(loudness).”
SEL
Within
5 seconds
3
Adjust the selected item.
See page 20 for details.
SEL
Within
5 seconds
4
SCM
Press and hold SCM until“MEMO”flashes on
the display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 19.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECTRUM ANALYZER
Selecting spectrum analyzer patterns
You can select any one from 10 different spectrum analyzer patterns or a demonstration of all
the mode.
1
2
1
Select the spectrum analyzer selection mode.
Each time you press the button, the spectrum analyzer
selection mode turns on and off.
ANA
ANA
changes
to while the unit is in
the spectrum analyzer selection mode.
ANA
Spectrum analyzer mode
currently selected
2
Select the spectrum analyzer selection pattern
you want.
As you turn the control dial, the spectrum analyzer pattern
changes as shown on the next page.
SEL
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Spectrum analyser patterns
1. ALL DEMO (default setting)
Demonstrate all the spectrum analyzer
patterns, each for 10 seconds.
7. WAVE 1
Wave image.
ANA
2. STANDARD
Standard spectrum analyzer.
ANA
8. WAVE 2
Wave image with more illumination
than WAVE 1.
3. PEAK HOLD
9. LEVEL 1
Hold the peak for about 2 seconds.
Level meter with little illumination.
ANA
ANA
4. RAIN 1
10. LEVEL 2
As if it is raining on the display.
Level meter with more illumination
than LEVEL 1.
ANA
11. LEVEL 3
Level meter with more illumination
than LEVEL 2.
5. RAIN 2
12. OFF
No spectrum analyzer is displayed.
As if it is raining on the display, but from
the bottom to the top.
6. SIDE WINDER
Spectrum analyzer is displayed
horizontally.
ANA
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER MAIN FUNCTIONS
Changing general settings (PSM)
You can change the following settings for this unit by using the PSM (Preferred Setting Mode)
control.
• PSM CLOCK (H/M): Adjusts the built-in clock (see below).
• PSM BEEP:Turns on or off the key-touch tone (see page 25).
• PSM DIMMER: Selects the dimmer mode (see page 25).
• PSM AREA:Selects the area you use this unit — when using this unit in an area other than
North or South America (see page 11).
• PSM LINE IN: Selects the external component to use (see page 26).
• PSM DEMO:Turn on or off the display demonstration (see page 26).
¢
4
SEL
Control dial
Setting the clock
After installation, set the built-in clock correctly.
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “PSM CLOCK H” does not appear, press ¢
or 4
repeatedly until it appears.
\
The hour digit starts flashing.
3 Turn the control dial to adjust the hour.
4 Press ¢ or 4 until “PSM CLOCK M” appears on the display.
\
The minute digit starts flashing.
5 Turn the control dial to adjust the minute.
6 Press SEL again to finish the setting.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on or off the key-touch tone
When shipped from the factory, the key-touch tone function is on so that you can hear a
“beep” each time you press a button.If you want to turn off this function, follow the procedure
below.
• BEEP ON: Activates the key-touch tone.
• BEEP OFF: Cancels the key-touch tone.
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “PSM BEEP” does not appear, press ¢
or 4
repeatedly until it appears.
\
The current setting appears.
3 Turn the control dial to select the setting you want appears.
4 Press SEL again to finish the setting.
Selecting the dimmer mode
When shipped from the factory, Auto Dimmer function has been activated.
With this function in use, the display automatically dims when you turn on the car head lights.
If you want to cancel this function, follow the procedure below.
• AUTO: Activates Auto Dimmer
• ON: Activates the Dimmer.
• OFF: Cancels Auto Dimmer
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “PSM DIMMER” does not appear, press ¢
or 4
repeatedly until it appears.
\
The current setting appears.
3 Turn the control dial to select the setting you want appears.
4 Press SEL again to finish the setting.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the external component to use
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
To use the external component as the playback source through this unit, you need to select
which component — CD changer or external component — to use. When shipped from the
factory, CD changer is selected as the external component.
LINE IN ON: To use the external component other than CD changer
LINE IN OFF:To use the CD changer
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “PSM LINE IN” does not appear, press ¢
or 4
repeatedly until it appears.
\
The current setting appears.
3 Turn the control dial to select either “LINE IN ON” (external component) or “LINE IN OFF”
(CD changer).
4 Press SEL again to finish the setting.
Note:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the
Installation/Connection Manual (separate volume).
Turning on or off the display demonstration
When shipped from the factory, this function is set to on.
With this function turned on, the unit automatically starts the following display demonstration
if no signal comes in for about 3 minutes except in the following case.
• When you turn on the unit for the first time after installation or after pressing the reset
button, it starts if no signal comes in for about 10 seconds.
CD CASSETTE
JVC
If you want to turn off the display demonstration, follow the procedure below.
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If “PSM DEMO” does not appear, press ¢
or 4
repeatedly until it appears.
\
The current setting appears.
3 Turn the control dial to the left to turn off the function (or turn it to the right to turn on the
function again).
4 Press SEL again to finish the setting.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATIONS
Before using the remote controller:
• Aim the remote controller directly at the remote sensor on the main unit. Make sure
there is no obstacle in between.
• Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
Remote sensor
Installing the batteries
R03(UM-4)/AAA(24F)
Insert the ·
ends first.
When the controllable range or effectiveness of the remote controller decreases, replace
the batteries — R03(UM-4)/AAA(24F).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote controller
ATT
BAND
PROG
1
2
4
5
DISC
FUNC
DISC
PRESET
6
3
1 Functions the same as the
button on the main unit.
2 Selects the source.
5 • Selects disc numbers in the decreasing
order, and starts playing while listening
to the CD changer.
ATT
Each time you press FUNC (function), the
source changes.
• Select preset numbers in the increasing
order while listening to the radio.
3 Functions the same as the control dial on 6 • Searches stations while listening to the
the main unit.
radio.
Note: This button does not function for the
preferred setting mode (PSM) adjustment.
4 • Changes the band while listening to the
radio.
• Fast forwards or reverses the track if
pressed and held while listening to a CD.
• Skips to the beginning of the next tracks
or goes back to the beginning of the
current (or previous tracks) if pressed
briefly while listening to a CD.
• Changes the tape direction while
listening to a tape.
• Selects disc numbers in the increasing
order, and starts playing while listening
to the CD changer.
• Fast-forward or rewind a tape and find a
beginning of a tune (MMS) while
listening to a tape.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X series with your KW-XC770.
If you have another CD automatic changer, consult your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K)
for connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your CD changer.
• If no discs are in the magazine of the CD changer or the discs are inserted upside
down, “NO DISC” will appear on the display.If this happens, remove the magazine and
set the discs correctly.
• If “RESET 1 - RESET 8” appears on the display, something is wrong with the connection
between this unit and the CD changer. If this happens, check the connection, connect
the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.
Playing CDs
¢
4
SCM
1
SEL
7
8
9
10
11
12
Number buttons
1
CD-CH
Select the CD automatic changer.
Play back starts from the first track of the first disc.
All tracks of all discs are played back.
Disc number
Elapsed playing time
ANA
Track number
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
ATT
29
Download from Www.Somanuals.com. All Manuals Search And Download.
To fast-forward or reverse the track
Press and hold ¢
while playing a CD, to fast-forward the track.
SSM
Press and hold 4
while playing a CD, to reverse the track.
To go to the next tracks or the previous tracks
Press ¢
briefly while playing a CD, to go ahead to the beginning of
the next track. Each time you press the button consecutively, the beginning
of the next tracks is located and played back.
SSM
Press 4
briefly while playing a CD, to go back to the beginning of the
current track. Each time you press the button consecutively, the beginning
of the previous tracks is located and played back.
To go to a particular disc directly
7
8
9
10
11
12
Press the number button corresponding to the disc number to start its
playback (while CD changer is playing).
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
Ex. When disc number 3 is selected.
Track number
Disc number
ANA
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting CD playback modes
SCM
SEL
7
8
9
10
11
12
RPT MO
RND B.SKIP
To play back tracks at random (Random Play)
Each time you press RND B.SKIP (Random/Blank Skip) while playing a
CD, CD random play mode changes as follows:
RND
B.SKIP
RANDOM 1 ON
RANDOM 2 ON
RANDOM OFF
Mode
RND indicator
Plays at random
RANDOM 1 ON
Lights
All tracks of the current disc, then the tracks of the next
disc, and so on.
RANDOM 2 ON
RANDOM OFF
Flashes
Goes off
All tracks of all discs inserted in the magazine.
Canceled.
To play back tracks repeatedly (Repeat Play)
Each time you press RPT MO (Repeat/Monaural) while playing a CD, CD
repeat play mode changes as follows:
RPT
MO
REPEAT 1 ON
REPEAT 2 ON
REPEAT OFF
Mode
RPT indicator
Lights
Plays repeatedly
REPEAT 1 ON
REPEAT 2 ON
REPEAT OFF
The current track (or specified track).
All tracks of the current disc (or specified disc).
Canceled.
Flashes
Goes off
31
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL COMPONENT OPERATIONS
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
SCM
1
SEL
3
7
8
9
10
11
12
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See “Selecting the external component to use” on page 26.)
1
Select the external component.
CD-CH
ANA
• If “LINE INPUT” does not appear on the display, see page
26 and select the external input (“PSM LINE IN”).
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
ATT
2
3
Turn on the connected component and start playing the source.
To turn up the
Adjust the volume.
volume
SEL
To turn down
the volume
32
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Handling cassettes
The cassette deck built in this unit requires very little attention, but you will be able to extend
the life of the cassette deck if you follow the instructions below.
To clean the heads
• Clean the heads after every 10 hours of use
using a wet-type head cleaning tape (available
at an audio store).
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
To keep the tape clean
• Always store the tapes to their storage cases
after use.
• Do not store tapes in the following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
CAUTIONS:
• Do not play the tapes with peeling labels; otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape may become entangled with the mechanism.
• Do not leave a cassette in the cassette compartment after use, as the tape may become slack.
The function below is also provided to ensure the longer life of the cassette deck.
Ignition key-off release
• When you turn off the ignition key with a cassette in the compartment, the unit automatically
releases the tape from its head.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling CDs
The CD player built in this unit has been designed only to play back the CDs bearing the
COMPACT
mark. Other discs cannot be played back.
DIGITAL AUDIO
Center holder
How to handle CDs
When removing a CD from its case, press down the center holder of the
case and lift the CD out, holding it by the edges.
• Always hold the CD by the edges. Do not touch its recording surface.
• When storing a CD into its case, gently insert the CD around the center
holder (with the printed surface facing up).
• Make sure to store CDs into the cases after use.
To keep CDs clean
A dirty CD may not play correctly. If a CD does becomes dirty, wipe it with a
soft cloth in a straight line from center to edge.
To play new CDs
New CDs may have some rough spots around the inner and outer edges.
If such a CD is used, this unit may reject the CD.
To remove these rough spots, rub the edges with a pencil or ball-point pen,
etc.
Moisture condensation
Moisture may condense on the lens inside the CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may malfunction. In this case, eject the CD and leave the
unit turned on for a few hours until the moisture evaporates.
CAUTIONS:
• Do not insert 8 cm (3 3/16") CDs (single CDs) into the loading slot. (Such CDs cannot be
ejected.)
• Do not insert any CD of unusual shape — like a heart or flower; otherwise, it will malfunction.
• Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high
temperature and humidity. Do not leave them in a car.
• Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.)
to clean CDs.
When playing a CD-R (Recordable)
You can play back your original CD-Rs on this unit.
• Before playing back CD-Rs, read their instructions or cautions carefully.
• Some CD-Rs recorded on CD recorders may not be played back on this unit because of
their disc characteristics, and of the following reasons:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens inside the unit.
– The pickup lens inside the unit is dirty.
• Use only “finalized” CD-Rs.
• CD-RWs (Rewritable) cannot be played back on this unit.
• Do not use the CD-Rs with stickers or sticking labels on the surface. They may cause
malfunctions.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a
service center.
Symptoms
Causes
Remedies
• CD cannot be played back.
CD is inserted upside down.
Insert the CD correctly.
• CD sound is sometimes
interrupted.
You are driving on rough
roads.
Stop CD play while driving on
rough roads.
CD is scratched.
Change the CD.
Connections are incorrect.
Check the cords and
connections.
• “NO DISC” appears on the
display.
No CD is in the loading slot.
(or in the magazine).
Insert CD.
CD is inserted incorrectly.
Insert it correctly.
• A cassette tape cannot be
inserted.
You have tried to insert a
cassette in the wrong way.
Insert the cassette with the
exposed tape facing right.
• Cassette tapes become hot. This is not a malfunction.
———————
• Tape sound is at very low
level and sound quality is
degraded.
The tape head is dirty.
Clean it with a head cleaning
tape.
• Sound is sometimes
interrupted.
Connections are not good.
Check the cords and
connections.
• Sound cannot be heard from The volume control is turned
Adjust it to the optimum level.
the speakers.
to the minimum level.
Connections are incorrect.
Check the cords and
connections.
• SSM automatic preset does
not work.
Signals are too weak.
Store stations manually.
• Static noise while listening to The antenna is not connected Connect the antenna firmly.
the radio.
firmly.
• “NO MAGAZINE” appears
on the display.
No magazine is in the CD
changer.
Insert the magazine.
CONTINUED TO THE NEXT PAGE
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Causes
Remedies
• “RESET 8” appears on the
display.
This unit is not connected to
a CD changer correctly.
Connect this unit and the CD
changer correctly and press
the reset button of the CD
changer.
• “RESET 1-RESET 7”
appears on the display.
Press the reset button of the
CD changer.
———————
• CD can neither be played
back nor ejected.
The CD player may function
incorrectly.
While holding 0 for the CD
player, press
for
ATT
more than 2 seconds. Be
careful not to drop CD when it
is ejected.
• This unit does not work at
all.
• The CD changer does not
work at all.
The built-in microcomputer
may function incorrectly due
to noise, etc.
Press the reset button on the
front panel (See page 2.)
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the
unit and the CD, but will be annoying. We recommend that you stop CD play while driving
on such rough roads.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
Maximum Power Output:
CD PLAYER SECTION
Type: Compact disc player
Front: 40 W per channel
Rear: 40 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Front: 16 W per channel into 4 Ω,
40 Hz to 20,000 Hz at no more
than 0.8% total harmonic
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20,000 Hz
Dynamic Range: 96 dB
Signal-to-Noise Ratio: 98 dB
distortion.
Wow and Flutter: Less than measurable limit
Rear: 16 W per channel into 4 Ω,
40 Hz to 20,000 Hz at no more
than 0.8% total harmonic
CASSETTE DECK SECTION
Wow and Flutter: 0.11% (WRMS)
Fast-Wind Time: 100 sec. (C-60)
Frequency Response: 50 Hz to 16,000 Hz
Signal-to-Noise Ratio:
distortion.
Load Impedance: 4 Ω (4 to 8 Ω allowance)
Tone Control Range:
Bass: ±10 dB at 100 Hz
Treble:±10 dB at 10 kHz
Dolby B NR ON: 64 dB
Dolby B NR OFF: 56 dB
Frequency Response: 40 Hz to 20,000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.0 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Stereo Separation:
40 dB
GENERAL
Power Requirement:
Operating Voltage: DC 14.4 V (11 V to 16
V allowance)
Grounding System: Negative ground
Allowabe Working Temperature:
0°C to +40°C (32°F to 104°F)
Dimensions (W x H x D):
TUNER SECTION
Frequency Range:
FM: 87.5 MHz to 107.9 MHz
(with channel interval set to 200 kHz)
87.5 MHz to 108.0 MHz
(with channel interval set to 50 kHz)
AM: 530 kHz to 1,710 kHz
(with channel interval set to 10 kHz)
531 kHz to 1,602 kHz
Installation Size:
178 mm x 100 mm x 150 mm
(7-1/16" x 3-15/16" x 5-15/16")
Front Panel Size:
170 mm x 92 mm x 15 mm
(6-3/4" x 3-5/8" x 5/8")
(with channel interval set to 9 kHz)
Mass:2.2 kg (4.9 lbs) (excluding accessories)
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Design and specifications subject to change
without notice.
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15,000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
If a kit is necessary for your car, consult
your telephone directory for the nearest
car audio speciality shop.
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to Reset
Still having trouble??
USA ONLY
Call 1-800-252-5722
We can help you!
VICTOR COMPANY OF JAPAN, LIMITED
EN, SP, FR
1199MNMMDWJEIN
J
C
V
Download from Www.Somanuals.com. All Manuals Search And Download.
|