AV-36P902 English 9/13/01 3:55 PM Page 1
For model:
AV-36P902
COLOR TELEVISION
USER'S GUIDE
Illustration of AV-36P902 and RM-C321G
IMPORTANT NOTE TO THE CUSTOMER
In the spaces below, enter the model and serial number of your television (locat-
ed at the rear of the television cabinet). Staple your sales receipt or invoice to
the inside cover of this guide. Keep this user's guide in a convenient place for
future reference. Keep the carton and original packaging for future use.
LCT1023-001A-A
0801-TN-FAA-JIM
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 3
IMPORTANT SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engi-
neered and manufactured to assure your personal safety. But improper use can
result in potential electrical shock or fire hazards! In order not to defeat the safe-
guards incorporated in this TV set, observe the following basic rules for its installa-
tion, use and servicing.
And also follow all warnings and instructions marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade of the plug is
wider than the other).
(POLARIZED-TYPE)
This safety feature allows the plug to fit into the power outlet only one way.Should
you be unable to insert the plug fully into the outlet, try reversing the plug.
Should it still fail to fit, contact your electrician.
2 Operate the TV set only from a power source as indicated on the TV set or refer
to the operating instructions for this information. If you are not sure of the type of
power supply to your home, consult your TV set dealer or local power company.
For battery operation, refer to the operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed
power cords and broken plugs. They may result in a shock or fire hazard.Call your
service technician for replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the
TV set where power cord is subject to traffic or abuse. This may result in a shock
or fire hazard.
5 Do not use this TV set near water — for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is
grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code provides information
with respect to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection requirements for the grounding
electrode.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 4
7 An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated
during operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed,
sofa, rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use
a mounting kit approved by the manufacturer.
USE
10 Caution children about dropping or pushing objects into the TV set through cabinet
openings. Some internal parts carry hazardous voltages and contact can result in a
fire or electrical shock.
11 Unplug the TV set from the wall outlet before cleaning.Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such
additions may result in a hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 5
13 For added protection of the TV set during a lightning storm or when the TV set is
to be left unattended for an extended period of time, unplug it from the wall outlet
and disconnect the antenna.This will prevent damage to product due to lightning
storms or power line surges.
14 A TV set and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the TV set and cart
combination to overturn.
SERVICE
15 Unplug this TV set from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
A.When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions.
Adjust only those controls that are covered in the operating instructions as
improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the TV set to nor-
mal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a
need for service.
16 Do not attempt to service this TV set yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
17 When replacement parts are required, have the service technician verify in writ-
ing that the replacement parts he uses have the same safety characteristics as
the original parts. Use of manufacturer’s specified replacement parts can prevent
fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service
technician to perform the safety check described in the manufacturer’s service lit-
erature.
19 When a TV set reaches the end of its useful life, improper disposal could result
in a picture tube implosion.Ask a qualified service technician to dispose of the
TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particu-
lar, specifies that the cable ground shall be connected to the grounding system
of the building, as close to the point of cable entry as practical.
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 6
Table of Contents
UNPACKING YOUR TV . . . .
7
ONSCREEN MENUS (Cont.)
Sound Settings
Bass . . . . . . . . . . . . . . 38
Treble . . . . . . . . . . . . . 38
Balance . . . . . . . . . . . . 38
MTS(Multi-channel Sound) . . 38
General Items
QUICK SETUP . . . . . . . . . . 8
Getting Started . . . . . . . . . . . . . 8
Remote Control
Batteries . . . . . . . . . . . . . 8
Basic Operation . . . . . . . . . . . . . . 8
Making Basic Connections . . . . . . . . . 9
Plug In Menu . . . . . . . . . . . . . . . 10
On/Off Timer . . . . . . . . . . 39
TV Speaker . . . . . . . . . . 40
Audio Out . . . . . . . . . . . . 40
Noise Muting . . . . . . . . . . 40
Tilt Correction . . . . . . . . . 41
Purity . . . . . . . . . . . . . . 41
Digital–In . . . . . . . . . . . . 41
Auto Shut Off . . . . . . . . . . 41
Front Panel Lock . . . . . . . . 41
Closed Caption . . . . . . . . . 42
DIAGRAMS . . . . . . . . . . . 11
CONNECTIONS . . . . . . . . . 12
Connecting to Cable or an Antenna . . . . 12
Connecting to a Cable Box . . . . . . . . 12
Connecting to a Cable Box and VCR . . . 13
Connecting to a DVD Player,
DTV Decoder and D-VHS . . . . . . . . . 14
Connecting to a Digital TV Receiver . . . 15
Connecting to an External Amplifier . . . 16
Connecting to a Camcorder . . . . . . . . 16
Connecting to JVC AV Compu Link III . . . 17
BUTTON FUNCTIONS . . . . . 43
Menu. . . . . . . . . . . . . . . . . . . 43
Exit and PIP Off. . . . . . . . . . . . . . 43
Display . . . . . . . . . . . . . . . . . . 43
Video Status . . . . . . . . . . . . . . . 44
Sleep Timer . . . . . . . . . . . . . . . . 44
Hyper Surround . . . . . . . . . . . . . 44
Muting . . . . . . . . . . . . . . . . . . 44
BBE. . . . . . . . . . . . . . . . . . . . 45
100+ . . . . . . . . . . . . . . . . . . . 45
Return+. . . . . . . . . . . . . . . . . . 45
Input. . . . . . . . . . . . . . . . . . . 45
VCR Buttons . . . . . . . . . . . . . . . 46
DVD Buttons . . . . . . . . . . . . . . . 46
TV/CATV Switch . . . . . . . . . . . . . 46
VCR/DVD Switch . . . . . . . . . . . . 46
Light. . . . . . . . . . . . . . . . . . . 46
Natural Cinema . . . . . . . . . . . . . . 46
16:9 Mode . . . . . . . . . . . . . . . . . 46
Index . . . . . . . . . . . . . . . . . . . 47
PIP (Picture-In-Picture)
GETTING STARTED . . . . . . 18
Remote Control Basics . . . . . . . . . . 18
Changing The Batteries . . . . . . . . . . 18
Setting Cable Box or Satellite Codes . . . 19
Setting VCR Codes . . . . . . . . . . . 20
Setting DVD Codes . . . . . . . . . . . 21
ONSCREEN MENUS . . . . . . 22
Using the Guide . . . . . . . . . . . . . 22
The Onscreen Menus . . . . . . . . . . . 22
Plug In Menu
Instruction. . . . . . . . . . 24
Language. . . . . . . . . . . 24
Auto Tuner Setup . . . . . . . 24
Auto Clock Set . . . . . . . . . 25
Manual Clock Set . . . . . . . 26
Finish. . . . . . . . . . . . . . 26
Channel Summary . . . . . . . . . . . . 27
V-Chip. . . . . . . . . . . . . . . . . . . 28
Set Lock Code . . . . . . . . . 35
Picture Setting
Introduction. . . . . . . . . . 48
On/Move. . . . . . . . . . . . 48
Freeze. . . . . . . . . . . . . 49
Swap. . . . . . . . . . . . . . 49
Channel +/– . . . . . . . . . . . 49
Source. . . . . . . . . . . . . 49
Tint . . . . . . . . . . . . . . 36
Color . . . . . . . . . . . . . . 36
Picture . . . . . . . . . . . . . 36
Bright . . . . . . . . . . . . . 36
Detail . . . . . . . . . . . . . 36
Color Temperature . . . . . . . 37
Digital Noise Clear . . . . . . . 37
APPENDICES . . . . . . . . . . 50
Troubleshooting . . . . . . . . . . . . . . 50
Warranty . . . . . . . . . . . . . . . . . . 51
Authorized Service Centers . . . . . . . . 53
Search Codes . . . . . . . . . . . . . . . 54
Specifications . . . . . . . . . . . . . . . 55
6
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 7
UnpackingYour Television
Thank you for your purchase of JVC’s model AV-36P902 Color Television. Before you begin
setting up your new television, please check to make sure you have all of the following items.
In addition to this guide, your television box should include:
1 Television
2 AA Batteries
1 Remote Control
A matching TV stand
is also available
(optional).
A/V Input Plug
Used to connect
audio/video devices like
VCRs, DVD players, stereo
amplifiers, game consoles,
etc.
RF Connectors
Used to connect a
coaxial cable from an
external antenna or Cable
TV system.
S-Video Plug
Used to make video con-
nections with VCRs,
DVDs, Camcorders, etc
(optional).
AV Compu Link Cable
Used to connect JVC AV
Compu Link
capable components for
an automated home the-
ater.
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. But if you’re anxious
to start using your television right away, a quick setup guide follows on the next three pages.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 8
Quick Setup 1
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you
can operate your remote control, you first need to install the batteries (included).
Slide the cover on the back of the remote down towards the bottom of the remote control.
Insert two batteries (included) carefully noting the “+”and “–” markings, placing the “–”end in
the unit first. Slide the cover back into place.
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner of the
remote.
Power Button
Key Feature Buttons
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available chan-
nels. The right and left buttons will turn the volume up or down. These buttons are also
marked with four arrows and are also used with JVC's onscreen menu system. You will need to
use these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
Proceed to Step Two
8
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 9
Quick Setup 2
Step Two - Making Basic Connections
Next you will need to connect your television to an antenna, VCR or cable system. The most
basic VCR and antenna/cable connection is shown below. For more detailed connections, such
as ones where a cable box is required, or connecting with a combination of a cable box and
VCR, home stereo system, etc., see pages 12 to 17.
Cable/RFconnector
1) Connect an RF Cable from the wall outlet into the RFCable In on the back of the TV.
Connecting to a VCR
1) Connect the Red Cable from VCR Audio Output into the Red TV Audio In.
2) Connect the White Cable from VCR Audio Output into the White TV Audio In.
3) Connect the Yellow Cable from VCROutput into the Yellow TV Video In, OR Connect an RF
Cable from VCR RF Cable Out into the RF Cable In on the back of the TV.
NOTE:
• White,Yellow and Red are the most common colors for VCR Cables. Some models may vary
in color. Please consult the user’s manual for your VCR Player for more information.
• See page 20 for instructions on programming your remote control to operate the basic func-
tions of your VCR Player.
Proceed to Step Three
9
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 10
Quick Setup 3
Step Three - The Plug In Menu
When you turn your television on for the first time, the Plug In Menu will appear. This menu
sets some of the basic settings for your television. A complete description of the Plug In Menu
can be found starting on page 24. We recommend you complete the Plug In Menu items
before you start using your television. To begin watching your television right away you only
need to run the Auto Tuner Setup. This lets your television learn the channels it is able to
receive clearly. To run the Auto Tuner Setup, follow the steps below.
Press the
Press the
buttons to move to AUTO TUNER SETUP
buttons to begin AUTO TUNER SETUP
To choose CABLE (if you are connected to a cable system) or AIR (if you use
an antenna)
To move to START
To start Auto Tuner Setup
The Auto Tuner will now memorize all of the clear, active channels your television can
receive. This will take roughly one or two minutes.
The Auto Tuner is finished when the message PROGRAMMING OVER! appears on screen.
Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
The Quick Setup is complete
10
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 11
Diagrams
Front Panel Diagram
NOTE: To open and close the front panel, gently push it until you hear a click.
Rear Panel Diagram
11
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 12
Connections
Connecting to Cable or an Antenna
Diagram #1
Cable/RF connector
1) Connect an RF Cable from the wall outlet into the RF Cable In on the back of the TV.
Connecting to a Cable Box
Diagram #2
1) Connect an RFCable from the wall outlet into the RF Cable In on the Cable Box.
2) Connect an RFcable from the Cable Out on the cable box into the RFCable In on the back
of the TV.
NOTE:
•
Please see page 48 for more information on using the PIP feature with a cable box.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 13
Connections
Connecting to a Cable Box and VCR
Diagram #3
1) Connect an RF Cable from the wall outlet into the RF Cable Box In.
2) Connect an RF Cable from the Cable Box Out into the VCR In.
3) Connect an RF Cable from the VCR Out into the RF In on the back of the TV.
4) Connect the Red Cable from VCR Right Audio Output into the Red TV Audio In.
5) Connect the White Cable from VCR Left Audio Output into the White TV Audio In.
6) Connect the Yellow Cable from VCR Output into the Yellow TV Video In, OR Connect an
S-Video Cable from VCRS-Video Out into the S-Video In on the back of the TV.
NOTE:
• White,Yellow and Red are the most common colors for VCR Cables. Some models may vary
in color. Please consult the user’s manual for your VCR Player for more information.
• See page 20 for instructions on programming your remote control to operate the basic func-
tions of your VCR Player.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 14
Connections
Connecting to a DVD player, DTV Decoder and D-VHS
NOTE: This illustration is for connecting to Input 3
1) Connect Green Cable Out from DVD Player “Y”Component Output into TV “Y”Component
Input 2 or 3.
2) Connect Blue Cable Out from DVD Player “PB” Component Output into TV “PB” Component
Input 2 or 3.
3) Connect Red Cable Out from DVD Player “PR” Component Output into TV “PR” Component
Input 2 or 3.
4) Connect White Audio Cable Out from DVD Left Audio Output into TV Left Audio Input
2 or 3.
5) Connect Red Audio Cable Out from DVD Right Audio Output into TV Right Audio Input
2 or 3.
6) Connect the Yellow Cable Out from DVD Player Output into the Yellow TV In, OR connect
an S-Video Cable from DVD Player S-Video Out into the S-Video In on the back of the TV.
NOTE:
• Green, Blue and Red are the most common colors for DVD Cables. Some models may vary
in color. Please consult the user’s manual for your DVD Player for more information.
• See page 21 for instructions on programming your remote control to operate the basic func-
tions of your DVD Player.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 15
Connections
Connecting to a Digital TV Receiver
By inputting a High-bandwidth Digital Content Protection high-definition picture source to the
Digital-In terminal of this television, high-definition pictures can be displayed on the screen in
their digital form. (This terminal is for use in the future when High-bandwidth Digital Content
Protection DTV decoders, DVD players and D-VHS are put on the market.)
1) Connect the DTV Digital RGB Output Terminal to the DIGITAL-IN Digital Input Terminal on
the back of the TV.
2) Connect the Red Cable from the DTV Decoder Right Audio Output into the Right Audio
Input. VCR Audio Output into the Red TV Audio In.
3) Connect the Red Cable from the DTV Decoder Right Audio Output into the Right Audio
Input. VCR Audio Output into the Red TV Audio In.
NOTE:
• The Digital-In Terminal can only be used with 1080i and 480p picture signals. Set the DTV
Decode Digital-Out Terminal Output setting to 1080i or 480p. For detailed information, refer
to the DTV decoder instruction manual. If you cannot display the picture because your DTV
decoder does not have a Digital-Out Terminal Output setting, use the component Video Input
(or the S-Video Input or Video Input). (Refer to page 13 or 14.) In this case the picture will
be displayed as an analog signal.
• The Digital-In Terminal is not compatible with the picture signal of a personal computer.
• Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV Decoder.
• If the connection shown above is used, the DTV signal will be available on Digital-In on the
Input Menu. (Refer to page 41.)
If 480p signals (640 x 480 or 720 x 480) are displayed on the screen, the horizontal balance
may be slightly shifted. In cases such as this, the horizontal balance can be adjusted by
accessing“DIGITAL-IN” in the INITIALSETUP Menu. (Refer to page 41.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 16
Connections
Connecting to an External Amplifier
1) Connect the White Audio Cable from the TV’s Left Audio Output Jack to the Amplifier’s Left
Audio Input Jack.
2) Connect the Red Audio Cable from the TV’s Right Audio Output Jack to the Amplifier’s Right
Audio Input Jack.
NOTE:
•
See also “TV Speaker” and “Audio Out”on page 40 for more information on using external
speakers.
Connecting to a Camcorder
1) Connect the Yellow Video Cable Out from the Camcorder’s Video Output into the TV’s Video
Input Jack, OR connect an S-Video Cable from the Camcorder’s S-Video Output to the TV’s
S-Video Input.
2) Connect the White Audio Cable Out from the Camcorder’s Left Audio Output into the TV’s
Left Audio Input Jack.
3) Connect the Red Audio Cable Out from the Camcorder’s Right Audio Output into the TV’s
Right Audio Input Jack.
NOTE:
•
If your Camcorder is a mono sound model it will have only one audio jack. Connect it to the
TV’s Left Audio jack.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 17
Connections
Connecting to JVC AV Compu Link III
1) Plug one end of the AV Compu Link Cable into the AV Compu Link Input on your VCR,
DVD, or other Compu Link device.
2) Plug the other end of the AV Compu Link Cable into the AV Compu Link Input at the rear of
the TV.
NOTE:
• In order for the VCR playback to begin automatically, the recording tabs must be remove from
the VHS tape. If the tab is in place, automatic switching will occur when you push the VCR’s
Play button.
• The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.
• If your JVC-brand VCR has “A Code/B Code Remote Control Switching”(see your VCR’s
instruction book), using VCR A Code will switch the TV to Input 1.
• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see
the HiFi’s connection instructions for detailed connection information.
• AV COMPU LINK EXis compatible with any AV Compu Link III receiver.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 18
Getting Started
Remote Control Basics
• Before you can operate the remote control, you must first
install the batteries (included). See “Changing the
Batteries”at the bottom of this page for instructions. (For
an illustration, please see page 8.)
• Press the POWER button to turn the television on or off.
• Make sure the “TV/CATV” switch is set to “TV.” Move the
switch to “CATV”only if you need to operate a cable box.
• Slide the “VCR/DVD” selector switch to “VCR”to control a
VCR. Slide to “DVD” to control a DVD player. Please see
pages 19 to 21 for instructions on programming your
remote control to operate a Cable Box, VCRor DVDplayer.
• Press the CH+ and CH– buttons to scan through the chan-
nels. Tap the CH+ or CH– button to move through the
channels one channel at a time.
• To move rapidly through the channels using JVC’s
Hyperscan feature, press and hold CH+ or CH–. The chan-
nels will zip by at a rate of five channels per second.
• Press VOL+ or VOL– to raise or lower the volume. An indi-
cator bar will appear onscreen to show you the television
volume level.
• The CH+/– and VOL+/– buttons are also used to navigate
JVC’s onscreen menu system.
• You can directly access specific channels using the 10-key
pad.
For more information on remote control button features, see
pages 43 – 47. For information on using the onscreen
menus, see page 22.
Changing the Batteries
Push down on the remote’s back cover and slide towards the bottom to remove it.
Insert two AA batteries (supplied), carefully noting the "+" and "–" markings on the batteries
and on the remote control. To avoid a potential short circuit, insert the "–" end first. Be sure to
use only size AA batteries. When batteries are installed, slide the cover back into place (until it
clicks into position).
NOTE:
• If the remote control acts erratically, replace the batteries. Typical battery life is six months to
one year. We recommend using alkaline batteries for longer battery life. When you change
the batteries, try to complete the task within three minutes. If you take longer than three min-
utes, the remote control codes for your VCR, DVD, and/or Cable Box may have to be reset.
(See pages 19-21.)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 19
Getting Started
Setting the CATV, VCR and DVD Codes
Setting Cable Box or Satellite Codes
The remote control is programmed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed using the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the Cable Box/Satellite receiver.
• If your CATVor Satellite box does not respond to the first code, try the others listed. If it
does not respond to any code, try the Search Codes Function, on page 54.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 20
Getting Started
Setting VCR codes
The remote control is programmed with VCR codes for power on, power off, play, stop,
fast-forward, rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV”and the other 2-way selector switch to “VCR”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any code, try the Search Codes Function, on page 54.
• Some manufacturer’s VCR’s may not respond to the TV/VCR button, even if other buttons
work properly.
• To record, hold down the REC button on the remote and press PLAY.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 21
Getting Started
Setting DVD codes
The remote control is programmed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVDPlayer brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the DISPLAY button.
4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 54.
• After you program your remote, some DVD buttons may not work properly. If some buttons
do not work properly, use the remote control which came with your DVD player.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 22
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television.The ones you will see most frequently are:
Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–
buttons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or
right to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The “Press Button”icon means you should press the button named on your remote
control. (Button names appear in SMALL CAPITAL LETTERS.)
The “Helping Hand”icon points to the highlighted or selected item in a menu.
The Onscreen Menus
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in yellow is the one currently selected. If you press the MENU button again, the
onscreen display will skip to the next menu screen. If you use the Menu button on the TV’s
front panel instead of the remote, an additional menu screen showing channel number and
input will appear between “picture adjust” and “initial setup.” The “Plug In Menu” will appear the
first time the TV is plugged in.
NOTE:
• Menus shown in this book are illustrations, not exact replications of the television’s
onscreen displays.
• The arrows on the next page show the order in which the onscreen menus appear when
using the
buttons on your remote or TV.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 23
Onscreen Menus
NOTE:
• Digital-In will display only when the 480p pic-
ture signal in Digital-In is displayed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 24
Plug In Menu
Introduction
The Plug In Menu comes up automatically when you first turn on the TV after plugging it in.
The Plug In Menu helps you to get your TV ready to use by letting you set your preferences for:
• The Language in which you want the onscreen menus to appear
• The Auto Tuner Setup of which channels you wish to receive
• Setting the TV’s clock to the correct time so your timer functions will work properly
Descriptions of each of the Plug In Menu features appear on this page and the next. We rec-
ommend you complete the Plug In Menu setup first so your TV is set up just the way you want,
right away.
Language
You can choose to view your onscreen menus in three languages:English, French, or Spanish.
Press the MENU button
To LANGUAGE
To choose a language
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
Auto Tuner Setup
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons), you will receive only clear, active channels.
Press the MENU button
To AUTO TUNER SETUP
To operate
To choose CABLEor AIR
To move to START
To start Auto Tuner Setup
48
Programming will take approximately 1 to 2
minutes.
• Noise Muting will not work during Auto Tuner Setup.
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 25
Plug In Menu
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most Public Broadcasting stations. To
set the clock using the XDS signal:
Enter the channel number of your local PBS station
Press MENU
To SETCLOCK
To operate
To AUTO
ToTIME ZONE
To select your time zone
To move to Daylight Savings Time (D.S.T.)
To turn D.S.T. ON or OFF
To FINISH
To save settings and exit
• If you do not have a PBS station in your local area, you will have to set the clock manually.
See ‘Manual Clock Set’on the next page for instructions.
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings.
The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will
move back one hour at 2:00 am on the last Sunday in October.
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 26
Plug In Menu
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock
menu and follow the steps below.
To SET CLOCK
To operate
To MANUAL
To move to the hour
To set the hour
To move to minutes
To set the minutes
To move to START CLOCK
To start clock and exit
•You will not need to press the MENU button to enter this screen from the Plug In Menu.
Finish
Once you have the items in the Plug In Menu set to your personal preferences, move to the
Finish option to save your settings.
To FINISH
To save settings and exit
• You can change the preferences you set in the Plug In Menu at any time using the regular
JVC onscreen menu system.
NOTE:
You will have to reset the clock after a power interruption. You must set the clock before operat-
ing any timer functions.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 27
Channel Summary
Channel Summary
Channel Summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the MENU button
To CHANNEL SUMMARY
To operate
The Channel Summary screen (above) will now be displayed with the channels set to scan
marked with an "ü". You can delete channels from the scan by removing the "ü". If any chan-
nels were missed during Auto Tuner Setup and you wish to add them, you may by placing an
"ü" next to the channel number.
To the SCAN column
To include or delete from scan
EXIT when finished
You can block access to a channel by activating the Channel Lock.
To CHANNELSUMMARY
To operate
To the Lock Column
ZERO to lock or unlock that channel
EXIT/PIP OFF when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked,
enter the Lock Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCKCODE!” will flash on the
screen.
The channel cannot be accessed until the
correct code is entered.
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 35.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 28
V-Chip
Your TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United
States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to
program your TV to receive, or not to receive, programs based on content according to the
guidelines. Programs which exceed the ratings limits you set will be blocked. When a viewer
attempts to watch a blocked channel, this message appears:
The channel will remain blocked until the correct lock code is entered (see page 35 for informa-
tion on setting your lock code).
You can customize the V-Chip settings of your television to match your personal tastes.
The V-Chip menu below is the starting point for your V-Chip settings.
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next seven pages along with descriptions of the
rating categories.
To access the rating categories:
Press the MENU button
ToV-CHIP
To operate (Lock icon
will appear)
Press ZERO to access the V-Chip menu
To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate)
To move to SET US TV RATINGS, SET MOVIE RATINGS, or SET CANADIAN RAT-
INGS, (see following pages for descriptions of each item)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 29
V-Chip
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TVY is Appropriate for All Children.
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children.
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience.
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested.
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or
with their children.
❒ TV 14 Parents Strongly Cautioned.
Programs contain some material that may be unsuitable for children under the age of 14,
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only.
These programs are specifically for adults and may be unsuitable for anyone under 17 years
of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The
content types are:
• V/FV is forVIOLENCE/FANTASY VIOLENCE
• S stands for SEXUALCONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
29
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 30
V-Chip
Setting US V-Chip Ratings
Press the MENU button
ToV-CHIP
To operate (Lock icon
will appear)
Press ZERO to access the V-Chip menu
To turnV-Chip ON or OFF
To move to SET US TV RATINGS
To operate
Directions to set US V-Chip Ratings:
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the
or
to move the cursor to the correct location. Press
or
to turn the locking
feature on or off. An item is locked if the
icon appears instead of a “—”.
For example, to block viewing of all TV 14 shows, move the cursor to the top row of that column
and add a lock icon. Once you've put a lock on the top row, everything in that column is
automatically locked.
To the TV 14 Column
To turn on the lock
To FINISH
To save settings and exit
• If you want to change the setup, move the cursor to the top column and change the lock icon
to “—” by pressing
or
again. You may then select individual categories to block.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 31
V-Chip
Setting ratings with the V-Chip button
To access Rating information about a certain program, press the V-CHIP button while viewing
that program. A display like this will appear:
If you decide you want to block this category of viewing, press "0" while the above screen is
visible, and all programs from that category will be blocked.
Example 1:
If you want to set your V-Chip settings to block all programming above TV PG:
Press ZERO when TV-PG is displayed
All Programming above TV PG will be blocked.
Example 2:
If you want to set your V-Chip settings to block all programming above a current setting such as
TV PG-V (with violence):
Press ZERO when TV-PG - V is displayed
All Programming above TV PG - V (with Violence) will be blocked.
• For Children's programming you can block TV-Y and Y7 programs by Pressing “0” when Y is
displayed during a program. Programming for audiences other than children’s audiences will
not be affected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 32
V-Chip
Movie Ratings
❒ NR - Not Rated.
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including children's
programming, foreign programs, or adult material.
❒ G – General Audience.
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance.
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒ PG-13 – Parents Strongly Cautioned.
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R - Restricted.
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 - No One Under 17.
These movies contain content which most parents would feel is too adult for their children to
view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X - No One under 18.
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings:
Press the MENU button
ToV-CHIP
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
To SET MOVIE RATINGS
To enter movies menu
For example,
to block viewing of X and NC-17 rated from shows:
To the X Column
To turn on the lock
To the NC-17 Column
To turn on the lock
To FINISH
To save settings and exit
32
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 33
V-Chip
Canadian V-Chip Ratings
❒ E - Exempt.
Exempt programming includes:news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children.
Violence Guidelines:There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over.
Violence Guidelines:Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience.
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG - Parental Guidance.
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ - 14 Years and Older.
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ - Adult.
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings:
Press the MENU button
ToV-CHIP
To operate (Lock icon appears)
Press ZERO to access V-Chip setup options
To SET CANADIAN RATINGSENG (for English)
To enter ratings menu
For example,
to block viewing of programming rated 14+
and 18+ :
To the 18+ Column
To turn on the lock
To the 14+ Column
To turn on the lock
To FINISH
To save settings and exit
• For instructions on “Set Canadian Ratings FRE (in French)”, please see page 33 in the
French side of this user’s guide.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 34
V-Chip
Unrated Programs
Notes About Unrated Programs:
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming" category.
Examples of Unrated programs:
Emergency Bulletins
Locally Originated Programming
News
Political Programs
Public Service Announcements
Religious Programs
Sports
Weather
Some Commercials
• TVprograms or movies that do not have rating signals will be blocked if the Unrated Category is
set to BLOCK.
Directions to Block Unrated Programs:
You can block programs that are not rated.
Press the MENU button
ToV-CHIP
To operate (The lock icon
appears)
Press ZERO to access V-Chip setup options
To UNRATED
ToVIEW or BLOCK
Press EXIT/PIP OFF when done
34
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 35
V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes
pre-set with a Lock Code of "0000". You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Press the MENU button
To SETLOCK CODE
To operate
The lock icon
appears
Press ZERO to access the Lock Code
The first digit will be highlighted
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
To FINISH
To save settings and exit
Your Lock Code is now set.
Auto Demo
This shows you some of the great features of your JVC Television.
NOTE:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 36
Picture Settings
Tint
Tint allows you to adjust the levels of red and green in your TV picture.
Press the MENU button
ToTINT
To increase the levels of green
To increase the levels of red
To move to the next setting
Color
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
Press the MENU button
To COLOR
To make the colors more vivid
To make the colors more subdued
To move to the next setting
Picture
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
Press the MENU button
To PICTURE
To increase the level of contrast
To decrease the level of contrast
To move to the next setting
Bright
You can adjust the overall brightness of the TV picture with the Bright control.
Press the MENU button
To BRIGHT
To lighten the picture
To darken the picture
To move to the next setting
Detail
The Detail feature adjusts the level of fine detail displayed in the picture.
Press the MENU button
To DETAIL
To make the picture sharper (more details)
To make the picture smoother (less detail)
To move to the next setting
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 37
Picture Settings
Color Temperature
With Color Temperature, you can decide how strong or dull, the colors appear on the TV
screen.
Press the MENU button
To COLORTEMPERATURE
To choose LOW or HIGH
Digital Noise Clear
With Digital Noise Clear, this helps take out static or noise from a channel that may not be
coming in clearly.
Press the MENU button
To DIG.NOISE CLEAR
To operate
NOTE:
The setting screen will disappear if you do not make any adjustments or move to the next set-
ting in approximately three seconds. Any changes you have made to picture settings up to that
point will be stored. You can exit the Picture Settings menu at any time by pressing the EXIT
button on the remote control. When you want to reset the adjustment as the start setting, press
the 0 button.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 38
Sound Settings
Bass
You can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass
adjustment.
Press the MENU button
To BASS
To increase the bass
To decrease the bass
To move to the next setting
Treble
Use Treble to adjust the level of high-frequency sound in your TV’s audio.
Press the MENU button
ToTREBLE
To increase the treble
To decrease the treble
To move to the next setting
Balance
Adjust the level of sound between the TV’s two speakers with the Balance setting.
Press the MENU button
To BALANCE
To shift the balance towards the right speaker
To shift the balance towards the left speaker
To move to the next setting
MTS (Multi-Channel Television Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice in
what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broad-
cast may also include a Second Audio Program (SAP).
Press the MENU button
To MTS
Select the mode
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in
STEREO mode even if a certain broadcast is in MONO sound only.
• Choose the MONOsetting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
NOTE:
You can leave the Sound Settings menu at any time by pressing the EXIT button on the remote
control.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 39
General Items
On/Off Timer
The On/Off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you're not
home.
Press the MENU button
To ON/OFF TIMER
To operate (begins with ONTIME)
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
To set the minutes
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIMEthe same way as ON TIME
To accept OFFTIME and move to CHANNEL
To select channel
To move to ON VOLUME
to set volume level
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFFTIMER
Choose YES to accept the timer setting, choose NOif you don't wish to accept
To FINISH
To save settings
NOTE:
• The On/Off time cannot be set to locked or guarded channels.
• In order for the On/Off timer to work, the clock must be set.
• After a power interruption, the Timer settings must be reset.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 40
General Items
TV Speaker
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the MENU button
ToTVSPEAKER
To turn the TV's speakers ONor OFF
EXIT/PIP OFF when finished
• Before you turn the TV Speaker setting from OFF to ON, make sure that the TV volume
level is low! If the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TVSpeaker settings will return to “ON”.
Audio Out
If your television is connected to an external speaker source, Audio Out gives you the option of
controlling the volume level with your TV’s remote control.
Press the MENU button
To AUDIO OUT
ToVARI or FIX
EXIT/PIP OFF when finished
VARI: Lets you adjust the volume of the external speakers using the VOLUME +/– buttons on
your TV’s remote control.
FIX: The volume of the external speakers is adjusted using the audio device’s remote control.
Noise Muting
This feature inserts a blank blue screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the MENU button
To NOISE MUTING
To turn Noise Muting ON or OFF
• Noise Muting will not work during Auto Tuner Setup or when you operate Channel Summary.
NOTE:
• External Speakers: When using external speakers or amplifiers, shut off the TV Speakers
(see ‘TV Speaker’) above.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 41
General Items
Tilt Correction
This adjusts the pictures so that it looks even on the screen and not lopsided.
Press the MENU button
ToTILT CORRECTION
To adjust TILT CORRECTION
Purity
This helps clean up the picture so that it may not contain any “snow”.
Press the MENU button
To PURITY
To adjust PURITY
Digital-In
This is for if you are able to receive digital broadcasts.
Press the MENU button
To DIGITAL-IN
To adjust DIGITAL-IN on or off
• Digital-In will display only when the 480p picture signal in Digital-In is displayed.
Auto Shut Off
This feature allows you to tell the TV how long to stay on before shutting off. This is useful if
you fall asleep and forget to turn the TV off.
Press the MENU button
To AUTO SHUT OFF
To adjust AUTO SHUT OFF on or off
Front Panel Lock
This locks the front panel of the TV so that a child may not accidentally mess up your settings.
Press the MENU button
To FRONT PANEL LOCK
To adjust FRONT PANEL LOCK on or off
41
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 42
General Items
Closed Caption
Many broadcasts now include an onscreen display of dialog called Closed Captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the Closed Caption feature. To activate the Closed
Caption feature, follow the steps below.
Press the MENU button
To CLOSEDCAPTION
To operate
To select CAPTION (for Closed Captions), TEXT (for text display), or OFF
(for no display)
To move to CAPTION or TEXT
To select a caption (CC1 to CC4) or text channel (T1 to T4)
To accept that selection and move to FINISH
To save settings and exit
NOTE:
• Closed Caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing Closed Captioning will display a notice at the start of the
program.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 43
Button Functions
Menu
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics (like “Sound Settings”) for specific information on using menus.
Exit/PIP Off
Press the EXIT/PIP OFF button to leave a menu screen. Press Exit/PIPOff to turn off the
Picture-in-Picture function (please see page 48 for more information on the PIP feature.)
Display
The Display screen shows the current status of timers and inputs.
Press the DISPLAY button
The screen above shows the following information:
• The current channel or AV input (Channel 07)
• The current time (12:20 pm)
• Sleep Timer status/minutes remaining (The Sleep Timer is off)
• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)
• Each Press of the DISPLAY button changes the display mode:
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns Display off
• You may also turn off the Display at any step by pressing EXIT/PIP OFF.
NOTE:
• Please note that if the Clock, Sleep Timer or On/Off Timer are not set, the Display screen will
show:"CLOCK NOT SET", "SLEEP TIMER OFF", and "ON/OFF TIMER OFF" respectively.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 44
Button Functions
Video Status
The VIDEO STATUS button gives you a choice of three TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
Dynamic - Choose when you watch the TV in a brightly lit room.
Theater - Gives a rich, film-like look to video.
Press the VIDEO STATUS button
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the SLEEP TIMER button
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
You then have 20 seconds to press the Sleep Timer button to delay the shutoff for another
15 minutes.
Hyper Surround
Creates a deep, three-dimensional sound effect by channeling the audio through the TV's front-
firing speakers. Press the HYPER SUR. (SURROUND) button to turn the effect on or off.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTING again.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 45
Button Functions
BBE
BBE high definition audio adds natural, clear and extraordinary sound quality to any program.
Turn BBE On or Off using the BBE button.
100+ Button
Use the 100+ button to directly access channels above Channel 99. For example to move to
channel 124, press100+, 2 (two), 4 (four).
Return+
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the chan-
nels using the CH+ and CH- buttons.
RETURN+ and hold for three seconds
The channel currently active has been programmed as your Return+ channel. Now scan
through the channels using the CHANNEL+/– buttons.
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!”will appear.
• Return+ works only with the CHANNEL+/– buttons. Pressing any number key will cancel
Return+.
• Return+ does not affect the PIP channel.
Input
Selects the signal input source for the television:TV (for Antenna, DIGITAL-IN or Cable) or
Video-1, 2, 3, or 4 for video devices like VCR’s, DVD players, or camcorders.
INPUT
NOTE:
• BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from BBESound, Inc.
under USP 4638258, 4482866 and 5510572. For Canada, licensed from BBE Sound, Inc.
BBE is a registered trademark of BBE Sound, Inc.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 46
Button Functions
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include:play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to “VCR” to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufac-
turer’s brand VCR, please see the code chart and instructions on page 20.
DVD Buttons
You can also use this remote control to operate the basic functions of your DVD player. These
functions include:play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,
power on, and power off.
Move the selector switch to “DVD”to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 21.
TV/CATV Switch
Use either the television’s own tuner or a cable box to select channels. Set this switch to “TV”
to operate the television’s built-in tuner. Move the switch to “CATV”to operate a cable box.
• See page 19 for information on programming your remote for cable box operation.
VCR/DVD Switch
You can control a VCR or DVDplayer with the buttons on the lower part of the remote control.
Use the “VCR/DVD” selector switch to choose either VCRor DVDoperation.
• See pages 20 and 21 for information on programming your remote with VCR and DVD oper-
ating codes.
Light
Your remote control includes illuminated buttons for key features like CHANNEL +/– and VOLUME
+/–. Press the LIGHT button to turn the illumination on.
Natural Cinema
When you watch the movie or animation, press the Natural Cinema to adjust the outline of the
imagesto make them more sharp.
16:9 Mode
This adjusts the dimensions of the film or movie you are watching so that the image doesn’t
look stretched or squashed together.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 47
Button Functions
Index
This allows you to quickly look at up to 9 channels at a time so that you can decide which one
to watch.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 48
Button Functions - PIP
PIP Introduction
PIP displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you
can view pictures from two different channels simultaneously. A special set of PIP control but-
tons are located on the upper part of the remote control. Descriptions of each button appear
on this page.
On/Move
Turn PIP on by pressing the ON/MOVE button.
(PIP) ON/MOVE
07
02
PIP OFF to turn PIPoff
Once PIP is turned on, you can move the PIP window to any of the TV’s main picture’s
four corners with the ON/MOVE button.
ON/MOVE
Each press of ON/MOVE will shift the PIP window to a different corner.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 49
Button Functions - PIP
Freeze
Use the FREEZE button to lock a single, still image onto the PIP window.
• If PIP is off when FREEZE is pressed, a snapshot of the main screen is taken and placed in
the PIP window.
• If PIP is on when FREEZE is pressed, the image in the window when the button was pressed
is held.
Swap
You can exchange the channel displayed on the main screen for the one shown in the PIP win-
dow by pressing SWAP.
Channel +/– for PIP
Like the main CHANNEL +/– buttons, CHANNEL +/– for PIP lets you scan through the channels in
the PIP window.
• Direct channel selection with the 10 key pad for PIPis not possible.
Source
You can select the signal source for the PIP window image.
NOTE:
1
• The PIP window is / the size of the full screen.
9
• PIP will not display blocked channels or programs. A blue screen will display instead.
• PIP will not display the following conditions:
• When the Aspect is 16:9
• When the main picture is displayed as 480p, 720p and 1080i
• When the main picture is Digital-In
• Component Connection without S-Video or Composite Connection
49
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 50
Troubleshooting
50
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 51
Warranty
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth
below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE
MATERIALS ANDWORKMANSHIP from the date of original retail purchase for the period shown
below (the “Warranty Period”) (PICTURE TUBE is covered for Two (2) years.)
Parts
Labor
1 YEAR
1 YEAR
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE
DISTRICT OF COLUMBIA AND COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective within the warranty period,JVC will repair or
replace defective parts at no charge to the original owner. Such repair and replacement
services shall be rendered by JVC during regular business hours at JVCauthorized
service centers. Parts used for replacement are warranted only for the remainder of this
Warranty Period. All products and parts thereof may be brought to a JVCauthorized
service center on a carry-in basis. Televisions with a screen size of 25 inches and larger
may be covered on an in-home basis where such service is available.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
To determine if in-home service is available in your area, either contact the selling dealer (retail-
er) or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service loca-
able, will require clear access to the Television by the service representatives.If in-home service
is not available, carry in service will be provided.
If service is not locally available, box the product carefully, preferably in its original car-
ton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the
problem to the nearest JVC Factory Service Center, the name and location which will be
given to you by the toll free number.
If you have any questions concerning your JVC Product, please contact our Customer
Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1) Products which have been subject to abuse, accident,alteration,modification,tam-
pering,negligence, misuse, faulty installation,lack of reasonable care, or if repaired
or serviced by anyone other than a service facility authorized by JVC to render such
service, or if affixed to any attachment not provided with the products,or if the model
or serial number has been altered, tampered with,defaced or removed;
2) Initial installation, installation and removal from "built-in" entertainment centers and
other mounting systems;
3) Operational adjustments covered in the Owner’s Manual, normal maintenance, video
and audio head cleaning;
4) Damage that occurs in shipment, due to an act of God,and cosmetic damage;
5) Signal reception problems and failures due to line power surge;
6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90
days from the date of purchase;
51
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 52
Warranty
7) Accessories;
8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of pur-
chase.)
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES,INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESSWARRANTY
HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE,
OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL
(INCLUDING,WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULT-
ING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THISWAR-
RANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limita-
tions on how long the warranty lasts,so these exclusions or limitations may not apply to
you.This warranty gives you specific legal rights and you may also have other rights
which vary state to state.
JVC COMPANYOFAMERICA
1700 Valley Road
DIVISION OFJVC AMERICAS CORP.
Wayne, New Jersey 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY.THIS WARRANTY
DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY.
PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. and Serial No.which is located either on the rear, bottom or
side of the cabinet.
Retain this information for future reference.
Model No.:
Serial No.:
Purchase Date:
Name Of Dealer:
52
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 53
Authorized Service Centers
QUALITY
SERVICE
How to locate your JVC service center
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase, please read the
instruction booklet before operating the unit. In the event that repairs are neces-
sary, or for the address nearest your location within the Continental United
States, please call 1 (800) 537-5722 for your nearest authorized servicer or visit
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock, do not open the cabinet.There are no user serviceable
parts inside. Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product, you may contact your local JVC
Dealer. From the 48 Continental United States call toll free: 1 (800) 882-2345 or on
the web at www.JVC.com
For service in Canada
To locate your local JVC service center or dealer in Canada please call:
In Eastern Canada:
1 (416) 293-1311
In Western Canada:
1 (604) 270-1311
En Français (Montréal):
1 (514) 871-1311
Or visit us on the web at www.JVC.ca
53
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 54
Search Codes
Cable/Satellite Search Codes Function:
1) Slide the first 2-Way Mode Selector switch to “CATV.”
2) Press the TV POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press TV POWER, see if the CATV or Satellite box responds.
4) If there was a response, press RETURN+. The operating codes are now set.If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use
the remote control which came with the equipment.
5) Press RETURN+ to exit.
VCR Search Codes Function:
1) Slide the first 2-way selector switch to “TV”and the other 2-way selector switch to “VCR”.
2) Press the VCR POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press VCR POWER, see if the VCR responds.
4) If there was a response, press RETURN+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the manufacturers remote control which came with the VCR.
5) Press RETURN+ to exit.
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
2) Press the DVD POWER and RETURN+ buttons. Hold for at least three seconds and release.
3) Press DVD POWER, see if the DVD player responds.
4) If there was a response, press RETURN+. The operating codes are now set.If there was no
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use
the manufacturers remote control which came with the DVD player.
5) Press RETURN+ to exit.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 55
Specifications
Specifications subject to change without notice.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-36P902 English 9/13/01 3:55 PM Page 56
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
JVC COMPANYOF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
Wayne, New Jersey 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|