COLOUR TELEVISION
Contents
Knowing your TV’s features
AV-21WMG5
...........................
2
.
Remote control buttons and basic functions 3
..............................
TV buttons and functions
5
........................................
Setting up your TV
6
.................................
Basic setting for picture
Advanced setting for picture
8
..........................
9
................................
Basic setting for sound
10
........................
Advanced setting for sound
10
.............
Favorite channel and video setting
11
.....................................
Customized setting
TV channel presetting
Additional preparation
12
.................................
.................................
13
15
..........................................
Troubleshooting
................................
15
Specifications
Back cover
INSTRUCTIONS
GGT0077-001A-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions
1
6
9
0
8
2
3
7
4
5
RM-C1261
No.Press
To
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
Select and adjust menu function.
Select the desired channel number.
1
2
3
4
5
6
7
8
POWER
MENU/OK
5/∞/2/3
CHANNEL M
VOLUME M
TV/VIDEO
MUTING
Adjust the volume level.
Select TV or VIDEO terminal input.
Turn off the volume. Press this button again to resume the volume.
Display the programme number or video terminal number and PR list (channel
list) on the screen. You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5/∞/2/3 button to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite
channels are indicated with coloured mark.
DISPLAY
/BACK
On the other hand, you can use this button to return to the previous menu.
Select the programme number. For two digits programme number, press -/--,
then press the number button.
9
0
0~9, -/--
RETURN,
a) Return to the frequently view channel with one touch.
1
2
Choose the channel you want to register.
Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”
appears.
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!”
appears.
b) Return to the previously viewed channel, if you have not set or have
cancelled the Return channel as above.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions
How to operate menus and menu locations
TO
Operation
Note
Display the MENU.
Press the MENU/OK button 2.
To exit the MENU, press the
DISPLAY/BACK button* 8 or
choose EXIT menu.
Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the
Then press MENU/OK button 2.
Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title.
Then press MENU/OK button 2.
next page for more functions.
Display the 3rd menu. Press 5/∞ buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Return to the previous Press the DISPLAY/BACK button* 8.
menu.
–
Choose the setting of Press 5/∞ buttons 3 to choose a function.
Press the MENU/OK button 2 to
Then press the 2/3 buttons 3 to change the exit from the menu.
a function.
setting.
Adjust the effect level Press 5/∞ buttons 3 to choose a function.
of a function.
Then press the 2/3 buttons 3 to adjust the
effect level.
Display the sub menu Press 5/∞ buttons 3 to choose a function.
of a function.
Then press MENU/OK button 2 to display
–
the sub menu.
The following chart shows locations of functions in menus.
In this manual, location of a function is described as follows:
MENU
Top menu
2nd menu
MENU
Top menu
2nd menu
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
* To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the
blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote control.
Top menu
2nd menu
Location 3rd menu
Location
MENU
INPUT
EXT. INPUT
P.12
P.12
P.8
P.8
P.8
-
-
-
DISPLAY
-
-
PICTURE
* If you want to
adjust
PICTURE
SETTING
PICTURE MODE
PICTURE SETTING
WHITE BALANCE
PICTURE FEATURES
-
-
-
-
-
-
VNR
P.12
menu, you must
set PICTURE
MODE menu to
USER.
FAVORITE CH SETTING
P.11
VIDEO SETTING
P.11
COLOUR SYSTEM
P.8
SOUND
AI VOLUME
OFF TIMER
CHILD LOCK
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
BLUE BACK
AUTO SHUTOFF
-
P.10
P.12
P.12
P.13
P.13
P.12
P.9
-
-
-
-
-
-
-
-
FEATURES
INSTALL
EXIT
DELETE, MOVE, MANUAL, INSERT P.13
LANGUAGE
P.12
-
-
-
-
-
-
P.12
-
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TV buttons and functions
Front of the TV
9
8
7 6
5
4 3 2 1
AV-21WMG5
POWER
VIDEO
AUDIO
IN (VIDEO-2)
MENU
OK
CHANNEL
VOLUME
Rear of the TV
AV-21WMG5
=-
0
No. Button/terminal
Description
1
I (main power)
Press to turn on or turn off the TV’s main power.
2
Power lamp
Indicate the TV is being turned on or off.
No colour : TV’s main power is being turned off.
Red : TV’s main power is being turned on.
3
4
5
6
7
8
9
0
-
=
Not Application
Remote control sensor
VOLUME M
CHANNELM
MENU
Press to adjust the volume level.
Press to select the desired channel.
Press to display the menu.
Video and audio input jacks for VIDEO-2 mode.
Headphone jack.
Aerial socket.
Video and audio output jacks.
Video and audio input jacks for VIDEO-1 mode.
IN (VIDEO-2)
OUTPUT
VIDEO-1 INPUT
How to operate the menus with the TV button
Work as same as the button on the
remote control unit
TV button
Note
MENU
MENU/OK button
To display main menu and exit
menu after finish setting.
CHANNEL M
VOLUME M
∞/5 button
2/3 button
To select menu function.
To adjust the desired function.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
CAUTION
• Turn off the equipment including the TV
before connecting.
1 Connecting the aerial
2 Connecting the compatible main plug
to the AC outlet.
VHF/UHF outdoor aerial
Rear of the TV
3 Inserting batteries into the remote
control.
Insert two batteries by following the ª and
· polarities and inserting the · end first.
CAUTION:
If you connect a VCR, connect the aerial
output jack of your VCR and the aerial jack
on the TV with the aerial cable. Then
connect the output jacks of your VCR and
the VIDEO-1 input jacks of the TV with the
video cable and audio cables. For details,
see the manual of your VCR.
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work
properly, fit new batteries. The supplied
batteries are for testing, not regular use.
VHF/UHF outdoor aerial
Rear of the TV
4 Turn on the TV by pressing the main
power button.
To audio/video
To RF
JVC logo appears on the screen.
output
output
To aerial input
VCR
The illustration shown is just a sample. It may
not be same as your TV.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by
following the steps as below:
êìëëäàâ
ꢀ
7
• Press 5/∞ button to select your desired
• Press the red button to cancel the SETUP
TOUR RESTART function.
language.
If you want to make initial settings again
when the next time you turn on the TV,
press the MENU/OK button to activate the
SETUP TOUR RESTART function.
≠
≠
EDIT
PR
7
CH/CC
CH 09
CH 11
CH 13
8
9
10
11
12
13
■
3
• TV will start searching for the channels.
To stop AUTO PROGRAM, press MENU/OK
button.
• Proceed to edit the channel list (PR list).
For details, see page 13.
• If the JVC logo does not appear, use LANGUAGE and AUTO PROGRAM functions to
make the initial settings.
Those functions are located in the INSTALL menu.
• If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO
button to exit from initial settings.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture
To operate this function with a menu:
COLOUR SYSTEM
You can select the appropriate colour system
when the picture is not clear or no colour
appears.
❇
MENU
PICTURE
PICTURE MODE
To return the USER setting to the default, press
the blue button when the PICTURE SETTING
menu appears.
Press the COLOUR SYSTEM button to select a
setting.
AUTO
NTSC4.43
To operate this function with a menu:
MENU PICTURE PICTURE FEATURES
COLOUR SYSTEM
PAL
SECAM
NTSC3.58
Adjusting the picture - USER
You can adjust the desired picture setting when
selecting USER in PICTURE MODE.
❇
1 Select the USER in PICTURE MODE under
PICTURE menu.
MENU
USER
PICTURE
PICTURE MODE
❇
For the colour system in each country or region,
see the table below:
Area
Country or Region
System
2 Select the PICTURE SETTING in PICTURE
menu, then adjust the setting.
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore,
MENU
PICTURE
PICTURE SETTING
❇
PAL
Asia, Middle Thailand, India, etc.
CONTRAST
2 : Lower contrast
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
East
China, Vietnam, etc.
Hong Kong, etc.
PAL
PAL
BRIGHT
SHARP
COLOUR
TINT*
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc. NTSC
SECAM
*TINT can only be adjusted in NTSC system.
Russia, etc.
SECAM
PAL
PAL
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
WHITE BALANCE
PAL
PAL
You can change the white balance of the picture
to better match the type of video being viewed.
Select the WHITE BALANCE in the PICTURE
menu, then choose the desired setting.
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
Egypt, Morocco, etc.
SECAM
❇
MENU
PICTURE
WHITE BALANCE
NORMAL
COOL
WARM
Normal white balance.
Bluish white.
Reddish white.
PICTURE MODE
You can choose the desired picture setting with
one-touch.
Press the PICTURE MODE button to select a
setting.
SOFT
Softens contrast and sharpness.
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting
as you like.
BRIGHT
STANDARD
USER
Select USER and adjust following
items in the PICTURE SETTING menu.
(CONTRAST, BRIGHT, SHARP, COLOUR,
TINT*)
❇ About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
*TINT can only be adjusted in NTSC system.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Advance setting for picture
BLUE BACK
You can set the TV to automatically change to a
blue screen and mute the sound if the signal is
weak or absent, or when there is no input from
an antenna.
Select the BLUE BACK in the INSTALL menu,
then choose ON or OFF.
❇
MENU
INSTALL
BLUE BACK
If you wish to continue viewing the poor picture,
cancel the BLUE BACK function.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for sound
SOUND SYSTEM
You can select an appropriate sound system when
abnormal sound occurs even when the picture
appears normally.
Press the SOUND SYSTEM button to select a
setting.
B/G
I
D/K
M
The function is not available in video mode.
For the sound system in each country or region,
see the table below:
Area
Country or Region
System
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc. B/G
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India, etc.
East
China, Vietnam, etc.
Hong Kong, etc.
D/K
I
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc.
B/G
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
M
D/K
D/K
B/G
I
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
I
B/G
B/G
Egypt, Morocco, etc.
Advanced setting for sound
AI VOLUME
You can adjust the volume of all the channels
and video inputs to the same level automatically.
Select the AI VOLUME in SOUND menu, then
choose ON or OFF.
MENU
SOUND
AI VOLUME
❇
❇ About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite channel and video setting
To register the favorite channel
You can register and recall 4 favorite channels by
using the colour buttons (red, green, yellow,
blue).
To adjust the video setting
(VIDEO SETTING)
You can adjust the picture settings for video
inputs.
1 In TV mode, select a TV channel (PR01- 99)
1 Display the PICTURE menu and select
VIDEO SETTING in PICTURE FEATURES
menu.
you desired to register.
2 Press and hold a colour button for 3
seconds or more.
“FAVORITE CHANNEL 7 PROGRAMMED!”
appears on the screen and current channel
is registered.
MENU
PICTURE
PICTURE FEATURES
❇
VIDEO SETTING
2 Select VIDEO STATUS in VIDEO SETTING
menu, then choose the desired video
input.
3 To register other favorite channels, repeat
Step 1 to 2.
❇
VIDEO SETTING
VIDEO STATUS
To recall the favorite channel, press the colour
button.
VIDEO SETTING
When the TV is in menu mode, favorite channel
function is not available.
VIDEO STATUS
CONTRAST
BRIGHT
VIDEO-1
SHARP
COLOUR
TINT
EFFECT
ON
To adjust favorite channel setting
(FAVORITE CH SETTING)
You can adjust the picture settings for the favorite
channels.
3 Select EFFECT, then press 2/3 button to
choose ON. To cancel the settings, choose
OFF.
1 Display the PICTURE menu and select
FAVORITE CH SETTING in PICTURE
FEATURES menu.
4 Select the desired item that you wish to
adjust.
CONTRAST
TINT
BRIGHT
COLOUR
SHARP
MENU
PICTURE
PICTURE FEATURES
❇
FAVORITE CH SETTING
5 Press the MENU/OK button to exit the
menu.
2 Select FAVORITE CHANNEL in FAVORITE
CH SETTING menu, then choose the
desired favorite channel.
FAVORITE CH SETTING
FAVORITE CHANNEL
❇
FAVORITE CH SETTING
FAVORITE CHANNEL
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
EFFECT
PR 01
ON
3 Select EFFECT, then press 2/3 button to
choose ON.
To cancel the settings, choose OFF.
4 Select the desired item that you wish to
adjust.
CONTRAST
TINT
BRIGHT
COLOUR
SHARP
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
5 Press the MENU/OK button to exit the
menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting
To operate this function with a menu:
MENU FEATURES OFF TIMER
VNR
❇
You can reduce the picture noise.
Select the VNR in the PICTURE FEATURES menu
under PICTURE menu, then choose a setting of
VNR function.
When the elapsed of time left one minute,
“GOOD NIGHT!” appears on the screen.
You can display the OFF TIMER menu again to
confirm or change the remaining time.
MENU
VNR
PICTURE
PICTURE FEATURES
❇
AUTO SHUTOFF
OFF
VNR is turned off.
You can set the TV to turn off automatically
when no signal is received for about 15 minutes
or longer after the end of a broadcast.
Select AUTO SHUTOFF in INSTALL menu, then
choose ON or OFF.
AUTO
MIN
MAX
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
If you select MAX, the picture becomes softer
even if the original picture is sharp.
MENU
INSTALL
AUTO SHUTOFF
❇
The AUTO SHUTOFF function does not turn off
the TV’s main power.
The AUTO SHUTOFF function is not available in
video mode.
LANGUAGE
You can choose your desired on screen display
language.
Select the LANGUAGE in the INSTALL menu,
then choose a language.
EXT. INPUT (TV/ VIDEO)
MENU
INSTALL
LANGUAGE
❇
You can select TV or video terminal input with
one touch.
Press the TV/VIDEO button to select an input.
CHILD LOCK
You can disable the front control buttons of the
TV.
To operate this function with a menu:
❇
MENU
INPUT
EXT.INPUT
Select the CHILD LOCK in the FEATURES menu,
then choose ON or OFF.
DISPLAY
MENU
FEATURES
CHILD LOCK
❇
You can display the programme number, video
terminal number and PR list on the screen.
Press the DISPLAY button to display the informa-
tion on screen.
OFF TIMER
You can set the TV to turn off automatically to
standby mode after a set time.
To operate this function with a menu:
Press the OFF TIMER button to select a desired
period of time.
MENU
INPUT
DISPLAY
❇
OFF TIMER
0
120
10
You can set the period of time to a maximum of
120 minutes in 10 minutes step.
❇ About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting
5 Press the 3 button to choose an appropri-
ate sound system.
For details, see “SOUND SYSTEM” on
page 10.
To register the TV channels auto-
matically
You can register the TV channels into the TV’s
channel list automatically.
6 Press the green or red button to search for
the TV channel.
Searching stops when a channel is found
and displayed.
1 Display the INSTALL menu.
MENU
INSTALL
❇
2 Choose AUTO PROGRAM, then press the
MENU/OK button.
AUTO PROGRAM function starts, and the
channels received are registered in the
channel list (PR list) automatically.
7 Repeat step 5 until your desired TV
channel appears.
If the reception Press the blue or yellow button
is poor
to fine tune the TV channel.
If noisy sound
is heard
Press the 3 button to choose
3 “SETUP TOUR RESTART?” appears.
an appropriate sound system.
To start the
Press the MENU/OK button.
Then proceed to step 5 of
“Setting up your TV” on page
7.
8 Press the MENU/OK button to exit the
menu.
SETUP TOUR
To skip the
SETUP TOUR
Press the Red button.
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
4 The EDIT menu appears.
You can edit the TV channel list as you like.
To edit the
channel list
Proceed to the Step 3 of “To
edit the channel list (PR list)”
on this page.
Note: After this operation, other channel’s PR
numbers will be changed.
If a channel is
not registered
Proceed to the Step 3 of “To
register the channel manually”
on this page.
1 Display the INSTALL menu.
MENU
INSTALL
❇
2 Choose EDIT/ MANUAL, then press the
To exit the menu Press the MENU/OK button.
MENU/OK button. EDIT menu appears.
For details of “SETUP TOUR”, see page 7.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s
channel list manually.
9
■
3
10
11
12
13
3 Choose the channel which you want to
change PR number, or delete.
1 Display the INSTALL menu.
MENU
INSTALL
❇
4 Do the following action:
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
To change the
PR number
(MOVE)
Press the 3 button. Then move
it to the PR number you want
to use it for the channel.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
Finally press the 2 button.
Press the yellow button.
To delete the
9
■
3
10
11
12
13
channel (DELETE)
5 Press the MENU/OK button to exit the
menu.
3 Choose the channel which you want to
register.
4 Press the blue button to activate the
MANUAL function.
The sound system of the channel appears
at the right of the CH/CC number.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting
Channel
To add in the new channel
(INSERT in the EDIT menu)
You can add in the new channel in the TV
channel list as you like.
You need to find the “CH/CC” number for the TV
channel. Find the “CH/CC” number correspond-
ing to the channel number of the TV channel
from the attached sheet “CH/CC number list” on
this page.
CH
US
CCIR OIRT AUSTRALIA
CH
US
CCIR OIRT AUSTRALIA
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
US- 2
US- 3
US- 4
US- 5
US- 6
US- 7
US- 8
US- 9
US- 10
US- 11
US- 12
US- 13
E2
E3
E4
E5
E6
E7
E8
E9
R1
AU- 0
AU- 1
AU- 2
AU- 6
AU- 7
AU- 8
AU- 9
CH 36 US- 36, W+ 51 E36
CH 37 US- 37, W+ 52 E37
CH 38 US- 38, W+ 53 E38
CH 39 US- 39, W+ 54 E39
CH 40 US- 40, W+ 55 E40
CH 41 US- 41, W+ 56 E41
CH 42 US- 42, W+ 57 E42
CH 43 US- 43, W+ 58 E43
CH 44 US- 44, W+ 59 E44
CH 45 US- 45, W+ 60 E45
CH 46 US- 46, W+ 61 E46
CH 47 US- 47, W+ 62 E47
CH 48 US- 48, W+ 63 E48
CH 49 US- 49, W+ 64 E49
CH 50 US- 50, W+ 65 E50
CH 51 US- 51, W+ 66 E51
CH 52 US- 52, W+ 67 E52
CH 53 US- 53, W+ 68 E53
CH 54 US- 54, W+ 69 E54
CH 55 US- 55, W+ 70 E55
CH 56 US- 56, W+ 71 E56
CH 57 US- 57, W+ 72 E57
CH 58 US- 58, W+ 73 E58
CH 59 US- 59, W+ 74 E59
CH 60 US- 60, W+ 75 E60
CH 61 US- 61, W+ 76 E61
CH 62 US- 62, W+ 77 E62
CH 63 US- 63, W+ 78 E63
CH 64 US- 64, W+ 79 E64
CH 65 US- 65, W+ 80 E65
CH 66 US- 66, W+ 81 E66
CH 67 US- 67, W+ 82 E67
CH 68 US- 68, W+ 83 E68
CH 69 US- 69, W+ 84 E69
R2
R6
R7
R8
R9
E10 R10
E11 R11
E12 R12
AU- 10
AU- 11
CH 14 US- 14, W+ 29
CH 15 US- 15, W+ 30
CH 16 US- 16, W+ 31
CH 17 US- 17, W+ 32
CH 18 US- 18, W+ 33
CH 19 US- 19, W+ 34
CH 20 US- 20, W+ 35
CH 21 US- 21, W+ 36 E21
CH 22 US- 22, W+ 37 E22
CH 23 US- 23, W+ 38 E23
CH 24 US- 24, W+ 39 E24
CH 25 US- 25, W+ 40 E25
CH 26 US- 26, W+ 41 E26
CH 27 US- 27, W+ 42 E27
CH 28 US- 28, W+ 43 E28
CH 29 US- 29, W+ 44 E29
CH 30 US- 30, W+ 45 E30
CH 31 US- 31, W+ 46 E31
CH 32 US- 32, W+ 47 E32
CH 33 US- 33, W+ 48 E33
CH 34 US- 34, W+ 49 E34
CH 35 US- 35, W+ 50 E35
1 Display the INSTALL menu.
MENU
INSTALL
❇
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
3 Choose the PR number for which you will
register a new TV channel. When you add
a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to
change the sound system to M. Then
proceed to the next step.
4 Press the green button, then press 5/∞
buttons to choose “CC” or “CH”.
5 Press the number button to enter the
remaining CH/CC number.
The TV starts to search the TV channel,
and the picture of the TV channel appears.
If the TV finds no TV channel, a noisy
picture appears.
CC
US
CCIR OIRT AUSTRALIA
CC
US
W+ 2
W+ 3
W+ 4
W+ 5
W+ 6
W+ 7
W+ 8
CCIR OIRT AUSTRALIA
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
S- 1
S- 2
AU- 5
CC 38
CC 39
CC 40
CC 41
CC42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
C 78
S- 38
S- 39
S- 40
S- 41
S- 3
S- 4
S- 5
S- 6
AU- 5A
When a TV channel has already been registered
in PR99, using the INSERT function deletes that
TV channel.
S- 7
S- 8
S- 9
W+ 9
W+ 10
W+ 11
W+ 12
W+ 13
W+ 14
W+ 15
W+ 16
W+ 17
W+ 18
W+ 19
W+ 20
W+ 21
W+ 22
W+ 23
W+ 24
W+ 25
W+ 26
W+ 27
W+ 28
S- 10
S- 11
S- 12
S- 13
S- 14
S- 15
S- 16
S- 17
S- 18
S- 19
S- 20
S- 21
S- 22
S- 23
S- 24
S- 25
S- 26
S- 27
S- 28
S- 29
S- 30
S- 31
S- 32
S- 33
S- 34
S- 35
S- 36
S- 37
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
A
B
C
D
E
F
G
H
I
J
K
CH/CC number
When you want to use the INSERT function by
the previous operation, find the CH/CC number
corresponding to the channel number of the TV
channel from this table.
L
M
N
O
P
Q
R
S
T
U
V
W
W+ 1
X
Channel No. Country
Y
Z
Z+ 1
Z+ 2
R3
R4
R5
AU- 3
AU- 4
US
United States, Philippines, etc..
Middle East, Southeast Asia, etc..
Eastern Europe, Russia, Vietnam, etc..
CCIR
OIRT
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
A- 5
A- 4
A- 3
A- 2
A- 1
AUSTRALIA Australia, etc..
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional preparation
Before connecting
• Read the manuals provided with the devices
for the proper connection.
• Turn off all the devices including the TV.
Front of the TV
• Note that connecting cables are not supplied.
Headphones
Camcorder or TV game
VIDEO
AUDIO
IN (VIDEO-2)
MENU
OK
C
Rear of the TV
VCR (for playing)
DVD player
(Composite signals)
VCR (for recording)
Troubleshooting
If a problem occurs when you are using the TV, check the following troubleshooting guide before
calling for repair.
No picture,
no sound
• Deactivate the BLUE BACK function
if it is turned on.
• Choose the appropriate sound
system. Refer to “SOUND SYSTEM”
on page 10.
Cannot operate the• The batteries may be exhausted.
remote control
Replace with new batteries (see
page 6).
• Ensure that you are operating the
remote less than seven meters from
the front of your TV.
Snowy picture
• Check the aerial cable and its
connection with the TV.
• Interference occurs caused by other
devices such as an amplifier,
personal computer, or a hair drier.
Move such devices away from your
TV.
Cannot operate the• Press TV/VIDEO button to return to
menus
TV mode and try operating the
menus.
Stripes appear
on the picture
Cannot operate the• Deactivate the CHILD LOCK
front control
buttons
function if it is turned on (see page
12).
Double-pictures • Interference occurs caused by
TV is turned off • This may due to the AUTO SHUT
(ghosting) occur
signal reflecting from mountains or
building. Try to adjust the aerial’s
direction or use a better directional-
ity antenna.
suddenly
OFF function is activated. Press the
POWER button to turn on the TV.
Colour patches
appear at the
corner of the
screen
• This may due to the magnetized
device such as a speaker near to
your TV. Keep the device apart
from your TV. Alternately, you can
also use the magnetic- shielded
speaker.
Poor picture
• Choose the appropriate colour
system. Refer to “COLOUR
SYSTEM” on page 8.
• Adjust the COLOUR or BRIGHT
setting. Refer to “Adjusting the
picture - USER” on page 8.
Image takes a
• Image required time to stabilize
short period to be before display.
White and bright • Inevitable phenomenon due to the
still image look as nature of the picture tube. This is
if it were coloured not a malfunction.
displayed
This is not a malfunction.
TV may emitted • This is due to a sudden change in
crackling sound
temperature and it is not a
Top of the image • This is due to the condition of the
malfunction. If the crackling sound
is too frequent, request your service
technician for inspection.
from software
products or video
tape is distorted
video signal whereby the image
was not recorded properly.
This is not a malfunction.
Feel a slight
• This is due to the static electricity
of the picture tube and it will not
electric shock
when touching the harm the human body. This is not a
TV screen
malfunction.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV RF systems
B/G, I, D/K, M
Colour systems
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
Power requirements
AC 110 to 240 V, 50/60 Hz
Power consumption
63 W
External input / output
VIDEO-1:
VIDEO-2:
VIDEO input, AUDIO input
VIDEO input, AUDIO input*
(*You can choose to connect one of AUDIO input jacks)
VIDEO output, AUDIO output
stereo mini jack (3.5 mm diameter,
sound is monaural)
OUTPUT:
Headphone jack:
Design and specifications are subject to change without notice.
© 2005 Victor Company of Japan, Limited
0205-NIC-JMT
Download from Www.Somanuals.com. All Manuals Search And Download.
|