CD RECEIVER
KW-S601
INSTRUCTIONS
GET0397-001A
[B]
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
• Button operations are mainly explained with
the illustrations in the table below.
CONTENTS
• Some related tips and notes are explained in
“More about this unit” (see pages 19 – 21).
Control panel ...................................
4
Getting started.................................
Basic operations....................................................
5
5
Press briefly.
Radio operations ..............................
6
FM RDS operations............................
Searching for your favorite FM RDS programme ...
7
7
Press repeatedly.
Disc operations.................................
Playing a disc in the unit .......................................
Playing discs in the CD changer.............................
9
9
9
Press either
one.
Sound adjustments........................... 12
General settings — PSM ................... 13
iPod®/D. player operations ................ 15
Other external component operations ..... 17
DAB tuner operations........................ 17
More about this unit ......................... 19
Maintenance .................................... 22
Troubleshooting............................... 23
Specifications................................... 25
Press and hold until your
desired response begins.
Press and hold both
buttons at the same time.
The following marks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
: Indicator displayed for the
corresponding operation.
For safety...
Warning:
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
If you need to operate the unit while driving,
be sure to look ahead carefully or you may be
involved in a traffic accident.
Caution on volume setting:
Temperature inside the car...
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel
Parts identification
Display window
1 Source buttons —FM/DAB, AM,
; Control dial
CD/CD-CH, AUX
2
(standby/on attenuator) button
Display window
a Main display
3 Loading slot
4 Display window
5 0 (eject) button
6 5 (up) / ∞ (down) buttons
s Track information indicators—TAG (ID3
Tag),
(folder),
(track/file)
d Tuner reception indicators—ST (stereo),
MO (monaural)
7 4 /¢
buttons
8 AUX (auxiliary) input jack
9 Number buttons
f Track type indicators—WMA, MP3
g Playback source indicators—CH (CD
changer), DISC (built-in CD player)
h RDS indicators—TP, PTY, AF, REG
j Playback mode / item indicators—
RND (random),
RPT (repeat)
k LOUD (loudness) indicator
l Source display
/ Tr (track) indicator
p MODE button
q MO (monaural) button
w CLOCK button
e SSM (Strong-station Sequential Memory)
button
r TP/PTY (traffic programme/programme
type) button
t DISP (display) button
y RPT (repeat) button
u SEL (select) button
i RND (random) button
o Reset button
(disc),
(folder),
4
Download from Www.Somanuals.com. All Manuals Search And Download.
!
⁄
Adjust the volume.
Getting started
Basic operations
~
Turn on the power.
Volume level appears.
Ÿ
For FM tuner
Adjust the sound as you want. (See
page 12.)
To drop the volume in a
moment (ATT)
To restore the sound,
press it again.
For DAB* tuner
To turn off the power
For AM tuner
Basic settings
• See also “General settings — PSM” on pages
13 and 14.
Setting the time display mode
For CD*, CD changer* or
iPod*/D.player*
1
2 Select “24H/12H,” then “24H” (hour)
or “12H” (hour).
For external component connected
to AUX input jack
3 Finish the procedure.
* You cannot select these sources if they
are not ready or not connected.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
When a station is received, searching
stops.
Setting the clock
1
To stop searching, press the same button
again.
To tune in to a station manually
In step Ÿ ...
1
2 Setting the hour and minute.
To adjust the
hour
To adjust the
minute
2 Select a desired station frequency.
To use these buttons for their original
functions again, wait for 15 seconds without
pressing any of these buttons or press CLOCK
again.
When an FM stereo broadcast is hard to
receive
To check the current clock time while
listening to a source
Lights up when monaural mode is activated.
Current display Ô
Clock
Radio operations
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO
indicator goes off.
~
or
Storing stations in memory
You can preset six stations for each band.
Lights up when receiving an FM stereo broadcast with
sufficient signal strength.
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you
Selected band appears.
want to store into.
Ÿ
Start searching for a station.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
2 Select the preset station (1 – 6) you
want.
FM RDS operations
“SSM” flashes, then disappears when
automatic presetting is over.
What you can do with RDS
RDS (Radio Data System) allows FM stations
to send an additional signal along with their
regular programme signals.
By receiving the RDS data, this unit can do the
following:
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band
• Programme Type (PTY) Search (see the
following)
• TA (Traffic Announcement) and PTY
Standby Receptions (see pages 8 and 13)
• Tracing the same programme automatically
—Network-Tracking Reception (see page 9)
• Programme Search (see page 13)
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
Searching for your favorite
FM RDS programme
2
You can tune in to a station broadcasting your
favorite programme by searching for a PTY
code.
3
• To store your favorite programme types, see
page 8.
~
Ÿ
The last selected PTY
code appears.
Preset number flashes for a while.
Select one of your favorite
programme types.
Listening to a preset station
1
or
Select one of the PTY codes (see
page 8).
or
Continued on the next page
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Finish the procedure.
!
Start searching for your favorite
programme.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA)
from any source other than AM.
The volume changes to the preset TA volume
level if the current level is lower than the preset
level (see page 13).
PTY codes
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, POP M (music), ROCK M (music), EASY
M (music), LIGHT M (music), CLASSICS, OTHER M (music),
WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE
IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),
OLDIES, FOLK M (music), DOCUMENT
To activate TA Standby Reception
The TP (Traffic Programme)
indicator either lights up or
flashes.
Storing your favorite programme
types
• If the TP indicator lights up, TA Standby
Reception is activated.
• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
You can store six favorite programme types.
Preset programme types in the number buttons
(1 to 6):
To activate TA Standby Reception, tune in to
another station providing these signals. The
TP indicator will stop flashing and remain lit.
1 Select a PTY code (see page 7).
To deactivate the TA Standby Reception
The TP indicator goes off.
2 Select the preset number (1 – 6) you
want to store into.
PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favorite PTY
programme from any source other than AM.
To activate and select your favorite PTY code
for PTY Standby Reception, see page 13.
The PTY indicator either lights up or flashes.
• If the PTY indicator lights up, PTY Standby
Reception is activated.
Ex.: When “ROCK M” is selected
3 Repeat steps 1 and 2 to store other
PTY codes into other preset numbers.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune in
to another station providing these signals. The
PTY indicator will stop flashing and remain
lit.
Disc operations
Playing a disc in the unit
All tracks will be played repeatedly until you
change the source or eject the disc.
To deactivate the PTY Standby Reception,
select “OFF” for the PTY code (see page 13).
The PTY indicator goes off.
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception
is not sufficient enough, this unit automatically
tunes in to another FM RDS station of the
same network, possibly broadcasting the same
programme with stronger signals (see the
illustration below).
To stop play and eject the disc
Playing discs in the CD changer
All discs in the magazine will be played
repeatedly until you change the source.
• Ejecting the magazine will also stop playback.
When shipped from the factory, Network-
Tracking Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-REG” on page 13.
~
Programme A broadcasting on different frequency areas
(01 – 05)
Ÿ
Select a disc.
For disc number from 01 – 06:
To check other information while listening to
an FM RDS station
For disc number from 07 – 12:
Station name (PS) = Station Frequency =
Programme type (PTY) = Clock = (back to the
beginning)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
About MP3 and WMA tracks
To locate a particular track (for CD) or folder
(for MP3/ WMA) directly
MP3 and WMA “tracks” (words “file” and
“track” are used interchangeably) are recorded
in “folders.”
To select a number from 01 – 06:
About the CD changer
It is recommended to use a JVC
MP3-compatible CD changer with your unit.
• You can also connect MP3-incompatible
CD changers. However, these units are not
compatible with MP3 discs.
To select a number from 07 – 12:
• You cannot use the CH-X99, CH-X100, and
KD-MK series CD changers with this unit.
• You cannot play any WMA disc in the CD
changer.
• Disc text information recorded in the CD
Text can be displayed when a JVC CD Text
compatible CD changer is connected.
• To use direct folder access on MP3/WMA,
it is required that folders are assigned with
2-digit numbers at the beginning of their
folder names—01, 02, 03, and so on.
To select a particular track in a folder (for
MP3/WMA):
To fast-forward or reverse the track
To go to the next or previous tracks
Other main functions
Skipping tracks quickly during play
To go to the next or previous folders (only for
MP3/WMA)
Only possible on JVC
For MP3 tracks:
MP3-compatible CD changer
For WMA tracks:
• For MP3/WMA, you can skip tracks within
the same folder.
Ex.: To select track 32 while playing a track
whose number is a single digit (1 to 9)
1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Changing the display information
While playing an audio CD or a CD Text
Each time you press the button, you can
skip 10 tracks.
• After the last track, the first track will be
selected and vice versa.
While playing an MP3/WMA 2 disc
*
• When “TAG DISP” is set to “TAG ON”
(see page 14)
Prohibiting disc ejection
You can lock a disc in the loading slot.
• When “TAG DISP” is set to “TAG OFF”
To cancel the prohibition, repeat the same
procedure.
: Elapsed playing time with the current
track number
: Clock with the current track number
1
*
If the current disc is an audio CD,
“NO NAME” appears.
Only for the built-in CD player.
If an MP3/WMA file does not have Tag
information, folder name and file name
appear. In this case, the TAG indicator will
not light up.
2
3
*
*
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the playback modes
Sound adjustments
You can adjust the sound characteristics to your
preference.
You can use only one of the following playback
modes at a time.
1
1
2
2 Select your desired playback mode.
7 Repeat play
Mode
Plays repeatedly
TRK RPT
: The current track.
FLDR RPT*1 : All tracks of the current
folder.
Ex.: When “TRE” is selected
DISC RPT*2 : All tracks of the current disc.
RPT OFF
: Cancels.
Indication, [Range]
BAS (bass), [–06 to +06]
Adjust the bass.
7 Random play
TRE (treble), [–06 to +06]
Adjust the treble.
FAD* (fader), [R06 to F06]
Adjust the front and rear speaker balance.
Mode
Plays at random
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
FLDR RND*1 : All tracks of the current
folder, then tracks of the next
folder and so on.
LOUD (loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at low volume level.
DISC RND : All tracks of the current disc.
MAG RND*2 : All tracks of the inserted
discs.
RND OFF : Cancels.
VOL (volume), [00 to 50]
Adjust the volume.
* If you are using a two-speaker system, set the
fader level to “00.”
1
*
*
Only while playing an MP3/WMA disc.
Only while playing discs in the CD
changer.
2
12
Download from Www.Somanuals.com. All Manuals Search And Download.
General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
3 Adjust the PSM item selected.
1
2 Select a PSM item.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
Indications
Selectable settings, [reference page]
24H/12H
12H O 24H, [5]
Time display mode
[Initial: 24H]
CLK ADJ
AUTO
OFF
: [Initial]; The built-in clock is automatically adjusted
using the CT (clock time) data in the RDS signal.
: Cancels.
Clock adjustment
When the received signals from the current FM RDS station become
weak...
AF-REG
Alternative frequency/
AF
: [Initial]; Switches to another station (the programme
may differ from the one currently received), [9].
• The AF indicator lights up.
regionalization
reception
AF REG
OFF
: Switches to another station broadcasting the same
programme.
• The AF and REG indicators light up.
: Cancels (not selectable when “DAB AF” is set to “AF ON”).
Activates PTY Standby Reception with one of the PTY codes, [8].
OFF [Initial] = PTY codes, [8] = (back to the beginning)
PTY-STBY
PTY standby
[Initial: VOL 15]; VOL 00 — VOL 50, [8]
TA VOL
Traffic announcement
volume
P-SEARCH
Programme search
ON
: Using the AF data, the unit tunes in to another frequency
broadcasting the same programme as the original
preset RDS station is if the preset station signals are not
sufficient.
OFF
: [Initial]; Cancels.
Continued on the next page
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Indications
Selectable settings, [reference page]
DAB AF*1
AF ON
: [Initial]; Traces the programme among DAB services
Alternative frequency
reception
and FM RDS stations, [9, 18].
: Cancels.
AF OFF
DAB VOL*1
You can adjust the volume level (VOL –12 — VOL +12) of DAB tuner
to match the FM sound level and store it in memory.
[Initial: VOL 00]
DAB volume
adjustment
DIMMER
Dimmer
AUTO
: [Initial]; Dims the display when you turn on the
headlights.
: Activates dimmer.
: Cancels.
ON
OFF
You can select the button illumination according to your preference.
GREEN O AMBER
[Initial : Green]
ILL SW
Illumination switch
SCROLL*2
ONCE
AUTO
OFF
: [Initial]; Scrolls the track information once.
: Repeats scrolling (5-second intervals in between).
: Cancels.
Scroll
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
AUX ADJ
Auxiliary input level
adjustment
A. ADJ 00 – A. ADJ 05: Adjust the auxiliary input level accordingly,
to avoid the sudden increase of the output level
when changing the source from external component
connected to the AUX input jack on the control
panel.
[Initial: A. ADJ 00]
TAG DISP
TAG ON
: [Initial]; Shows the Tag information while playing MP3/
Tag display
WMA tracks, [11].
TAG OFF : Cancels.
IF BAND
AUTO
: [Initial]; Increases the tuner selectivity to reduce
Intermediate frequency
filter
interference noises between close stations. (Stereo effect
may be lost.)
: Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
WIDE
1
*
*
Displayed only when DAB tuner is connected.
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
2
14
Download from Www.Somanuals.com. All Manuals Search And Download.
⁄
Adjust the sound as you want. (See
page 12.)
• Make sure the equalizer on the iPod or
D. player is deactivated.
iPod®/D. player operations
This unit is ready for operating an Apple iPod
or a JVC D. player from the control panel.
Before operating your iPod or D. player:
Connect either one of the following (separately
purchased) to the CD changer jack on the rear
of this unit.
To pause*1 or stop*2
playback
To resume playback,
press it again.
• Interface adapter for iPod —KS-PD100 for
®
controlling an iPod.
• D. player interface adapter—KS-PD500 for
controlling a D. player.
To fast-forward or
reverse the track
• For details, refer also to the manual supplied
with the interface adapter.
To go to the next or
previous tracks
Caution:
Make sure to turn off this unit or turn off the
vehicle’s ignition switch before connecting
or disconnecting the iPod or D. player.
1
*
*
For iPod
For D. player
2
Preparations:
~
Selecting a track from the menu
1 Enter the main menu.
Ÿ
Now the 5/∞/4 /¢
buttons
work as the menu selecting buttons*3.
3
*
The menu selecting mode will be canceled:
– If no operations are done for about
5 seconds.
– When you confirm the selection of a
track.
Playback starts automatically from
where it has been paused*1 or stopped*2
previously.
!
Adjust the volume.
2 Select the desired menu.
Continued on the next page
15
Download from Www.Somanuals.com. All Manuals Search And Download.
For iPod:
7
Random play
PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS
Ô GENRES Ô COMPOSER Ô (back to the
beginning)
For D. player:
PLAYLIST Ô ARTIST Ô ALBUM Ô GENRE
Ô TRACK Ô (back to the beginning)
ALBM RND*
Functions the same as “Shuffle Albums” of
the iPod.
SONG RND/RND ON
3 Confirm the selection.
Functions the same as “Shuffle Songs” of
the iPod or “Random Play = On” of the D.
player.
To move back to the previous
menu, press 5.
RND OFF
Cancels.
• If a track is selected, playback starts
automatically.
• If the selected item has another layer, you
will enter the layer. Repeat steps 2 and 3
until the desired track is played.
* For iPod: Only if you select “ALL” in
“ALBUMS” of the main “MENU.”
• Holding 4 /¢
can skip 10
items at a time.
To check other information while listening to
an iPod or a D. player
Selecting the playback modes
1
2 Select your desired playback mode.
Repeat play
7
ONE RPT
Functions the same as “Repeat One” of
the iPod or “Repeat Mode = One” for the
D. player.
ALL RPT
Functions the same as “Repeat All” of the
iPod or “Repeat Mode = All” for the D.
player.
RPT OFF
Cancels.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Other external component
operations
You can connect an external component to the
AUX (auxiliary) input jack on the control panel.
DAB tuner operations
What is DAB system?
Digital Audio Broadcasting (DAB) can
deliver digital quality sound without any
annoying interference and signal distortion.
Furthermore, it can carry text, pictures, and
data. When transmitting, DAB combines
several programmes (called “services”) to form
one “ensemble.” In addition, each “service”—
called “primary service”—can also be divided
into its components (called “secondary
service”). A typical ensemble has six or more
programmes (services) broadcast at the same
time.
For listening to iPod or D. player, see pages
15 and 16.
~
For selecting the external
component connected to AUX
input jack.
By connecting the DAB tuner, this unit can do
the following:
• Tracing the same programme automatically
—Alternative Frequency Reception (see
“DAB AF” on page 14).
It is recommended to use DAB tuner
KT-DB1000 with your unit. If you have
another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied for
your DAB tuner.
Ÿ
!
Turn on the connected component
and start playing the source.
Adjust the volume.
~
⁄
Adjust the sound as you want. (See
page 12.)
Ÿ
Start searching for an ensemble.
When an ensemble is received, searching
stops.
To stop searching, press the same button
again.
Continued on the next page
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in to a preset DAB service
!
Select a service (either primary or
secondary) to listen to.
1
To tune in to an ensemble manually
Start searching for an ensemble, as in step Ÿ ...
1
2 Select the preset DAB service
(primary) number (1 – 6) you want.
If the selected primary service has some
secondary services, pressing the same
button again will tune in to the secondary
services.
2 Select a desired ensemble frequency.
Tracing the same programme—
Alternative Frequency Reception
Storing DAB services in memory
You can keep listening to the same programme
by activating the Alternative Frequency
Reception.
You can preset six DAB services (primary) for
each band.
• While receiving a DAB service:
1 Select a service you want (see above).
When driving in an area where a service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same programme.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same programme as the
FM RDS station is broadcasting, this unit
automatically tunes in to the DAB service.
2 Select the preset number (1 – 6) you
want to store into.
Preset number flashes for a while.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
When shipped from the factory, Alternative
Frequency Reception is activated.
To deactivate the Alternative Frequency
Reception, see page 14.
FM RDS operations
• Network-Tracking Reception requires
two types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate correctly.
• If a Traffic Announcement is received by
TA Standby Reception, the volume level
automatically changes to the preset level (TA
VOL) if the current level is lower than the
preset level.
• When Alternative Frequency Reception
is activated (with AF selected), Network-
Tracking Reception is also activated
automatically. On the other hand, Network-
Tracking Reception cannot be deactivated
without deactivating Alternative Frequency
Reception. (See page 13.)
To change the display information while
tuning to an ensemble
Service name = Ensemble name = Channel
number = Frequency = Clock = (back to the
beginning)
More about this unit
Basic operations
Turning on the power
• If you want to know more about RDS, visit
• By pressing the source buttons on the unit,
you can also turn on the power. If the source
is ready, playback also starts.
Disc operations
Caution for DualDisc playback
• The Non-DVD side of a “DualDisc” does
not comply with the “Compact Disc Digital
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
not be recommended.
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
General
Tuner operations
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3, and WMA formats.
Storing stations in memory
• During SSM search...
–All previously stored stations are erased and
stations are stored newly.
–Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
–When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
Inserting a disc
• When a disc is inserted upside down, the disc
automatically ejects and the unit starts playing
the last selected source.
• Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Continued on the next page
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
Playing an MP3/WMA disc
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
• This unit can play back MP3/WMA files
with the extension code <.mp3> or <.wma>
(regardless of the letter case—upper/lower).
• This unit can show the names of albums,
artists (performer), and Tag (Version 1.0, 1.1,
2.2, 2.3, or 2.4) for MP3 files and for WMA
files.
• This unit can display only one-byte
characters. No other characters can be
correctly displayed.
Playing a CD-R or CD-RW
• Use only “finalized” CD-Rs or CD-RWs.
• This unit can play back only files of the same
type which are first detected if a disc includes
both audio CD (CD-DA) files and MP3/
WMA files.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped
while playing.
• This unit can play back MP3/WMA files
meeting the conditions below:
– Bit rate: 8 kbps — 320 kbps
• Some CD-Rs or CD-RWs may not play
back on this unit because of their disc
characteristics, or for the following reasons:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the unit is dirty.
– CD-R/CD-RW on which the files are
written with “Packet Write” method.
– There are improper recording conditions
(missing data, etc.) or media conditions
(stained, scratched, warped, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower than
that of regular CDs.
– Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
48 kHz, 44.1 kHz, 32 kHz (for WMA)
– Disc format: ISO 9660 Level 1/Level 2,
Romeo, Joliet, Windows long file name
• The maximum number of characters for file/
folder names vary among the disc format used
(includes 4 extension characters—<.mp3> or
<.wma>).
– ISO 9660 Level 1: up to 12 characters
– ISO 9660 Level 2: up to 31 characters
– Romeo*: up to 128 (60) characters
– Joliet*: up to 64 (30) characters
– Windows long file name*: up to 128 (60)
characters
• Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or a protective
seal stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
* The parenthetic figure is the maximum
number of characters for file/folder names in
case the total number of files and folders is
271 or more.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damage to the unit.
• This unit can play back files recorded in VBR
(variable bit rate).
Files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this
difference becomes noticeable.
• This unit can recognize a total of 512 files, of
200 folders, and of 8 hierarchies.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and
MP3 PRO format.
– MP3 files encoded in an inappropriate
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice format.
– WMA files which are not based upon
iPod® or D. player operations
• When you turn on this unit, the iPod or
D. player is charged through this unit.
• While the iPod or D. player is connected, all
operations from the iPod or D. player are
disabled. Perform all operations from this
unit.
• The text information may not be displayed
correctly.
– Some characters such as accented letters
cannot be shown correctly on the display.
– Depends on the condition of
communication between the iPod or
D. player and the unit.
• If the text information includes more than
8 characters, it scrolls on the display (see
also page 14). This unit can display up to 40
characters.
Windows Media Audio.
®
– WMA files copy-protected with DRM.
– Files which have the data such as WAVE,
ATRAC3, etc.
• The search function works but search speed is
not constant.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select the same source again,
playback starts from where it has been
stopped previously.
Notice:
When operating an iPod or a D. player,
some operations may not be performed
correctly or as intended. In this case, visit the
following JVC web site:
For iPod users: <http://www.jvc.co.jp/
english/car/support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from
dust. (Disc will not play this time.)
General settings—PSM
DAB tuner operations
• “AUTO” setting for “DIMMER” may not
work correctly on some vehicles, particularly
on those having a control dial for dimming.
In this case, change the “DIMMER” setting to
any other than “AUTO.”
• Only primary DAB services can be presetted
even when you store a secondary service.
• A previously preset DAB service is erased
when a new DAB service is stored in the same
preset number.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Moisture condensation
To play new discs
Moisture may condense on the lens inside the
CD player in the following cases:
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub the edges
with a pencil or ball-point pen, etc.
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the disc and
leave the unit turned on for a few hours until
the moisture evaporates.
How to handle discs
Do not use the following discs:
When removing a disc from
its case, press down the center
holder of the case and lift the
disc out, holding it by the edges.
• Always hold the disc by the
Center holder
Warped disc
edges. Do not touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
Sticker
Sticker residue
• Make sure to store discs into the cases after
use.
Stick-on label
To keep discs clean
A dirty disc may not play correctly.
If a disc does become dirty, wipe it
with a soft cloth in a straight line
from center to edge.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Remedies/Causes
• Sound cannot be heard from the
speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
• The unit does not work at all.
• SSM automatic presetting does not
work.
Reset the unit (see page 2).
Store stations manually.
• Static noise while listening to the
radio.
Connect the aerial firmly.
• Disc cannot be played back.
Insert the disc correctly.
• CD-R/CD-RW cannot be played
back.
• Tracks on the CD-R/CD-RW cannot
be skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component
which you used for recording.
• Disc can be neither played back nor
ejected.
• Unlock the disc (see page 11).
• Eject the disc forcibly (see page 2).
• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
• Disc cannot be played back.
• Noise is generated.
• Use a disc with MP3/WMA tracks recorded in
the format compliant with ISO 9660 Level 1,
Level 2, Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to
the file names.
Skip to another track or change the disc. (Do not
add the extension code <.mp3> or <.wma> to
non-MP3 or WMA tracks.)
• A longer readout time is required
(“CHECK” keeps flashing on the
display).
Do not use too many hierarchies and folders.
• Tracks do not play back in the order Playback order is determined when the files are
you have intended them to play.
recorded.
• Elapsed playing time is not correct.
This sometimes occurs while playing. This is
caused by how the tracks are recorded on the disc.
• “NO FILES” appears on the display.
Insert a disc that contains MP3/WMA tracks.
• Correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols.
Continued on the next page
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Remedies/Causes
• “NO DISC” appears on the display.
• “NO MAG” appears on the display.
• “RESET 8” appears on the display.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on
the display.
Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
• The iPod or D. player does not turn
on or does not work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Change the battery.
• Buttons do not work as intended.
• The sound is distorted.
The functions of the buttons have been changed.
Press MODE before performing the operation.
Deactivate the equalizer either on the unit or the
iPod/D. player.
• “NO IPOD” or “NO DP” appears on Check the connecting cable and its connection.
the display.
• Playback stops.
The headphones are disconnected during
playback. Restart the playback operation using the
control panel (see page 15).
• No sound can be heard when
connecting an iPod nano.
Disconnect the headphones from the iPod nano.
• No sound can be heard.
• “ERROR 01” appears on the display
when connecting a D. player.
Disconnect the adapter from the D. player. Then,
connect it again.
• “NO FILES” or “NO TRACK”
appears on the display.
No tracks are stored. Import tracks to the iPod or
D. player.
• “RESET 1” – “RESET 7” appears on
the display.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
• “RESET 8” appears on the display.
Check the connection between the adapter and
this unit.
• The iPod’s or D. player’s controls do Reset the iPod or D. player.
not work after disconnecting from
this unit.
• “noSIGNAL” appears on the display. Move to an area with stronger signals.
• “RESET 8” appears on the display.
Connect this unit and the DAB tuner correctly and
reset the unit (see page 2).
• “ANTENANG” appears on the
display.
Check the cords and connections.
• The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly
and reset the unit (see page 2).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
CD PLAYER SECTION
AUDIO AMPLIFIER SECTION
Type: Compact disc player
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Maximum Power Output:
Front: 50 W per channel
Rear: 50 W per channel
Number of Channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Continuous Power Output (RMS):
Front: 19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
Dynamic Range:
96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
MP3 Decoding Format:
Rear: 19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
MPEG1/2 Audio Layer 3
Max. Bit Rate: 320 kbps
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
WMA (Windows Media Audio) Decoding
®
Format:
Bass:
10 dB at 100 Hz
Max. Bit Rate: 192 kbps
Treble: 10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
GENERAL
Power Requirement:
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C
Dimensions (W × H × D):
Installation Size (approx.):
180 mm × 100 mm × 148 mm
Set Size (approx.):
Other Terminals:
CD changer, AUX (auxiliary) input jack
TUNER SECTION
Frequency Range:
FM: 87.5 MHz to 108.0 MHz
AM: (MW) 522 kHz to 1 620 kHz
(LW) 144 kHz to 279 kHz
188 mm × 100 mm × 175 mm
Mass (approx.):
2.0 kg (excluding accessories)
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)
50 dB Quieting Sensitivity:
Design and specifications are subject to change
without notice.
16.3 dBf (1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
• Microsoft and Windows Media are either
registered trademarks or trademarks of
Microsoft Corporation in the United States
and/or other countries.
• iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
[MW Tuner]
Sensitivity: 20 μV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 μV
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
EN
© 2006 Victor Company of Japan, Limited
0506DTSMDTJEIN
Download from Www.Somanuals.com. All Manuals Search And Download.
|