JOBO Digital Photo Frame Mirage L User Manual

Mirage L

Photo Display 15"

Instruction Manual

��

�

��

�

ls.c

�

^All�

�

��

�

^ls�^Se

�

arch And Download.

1.2. Precautions & Maintenance

This Mirage L is for indoor use only.

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Do not block the ventilation holes on the back of the Mirage L at any time.

Keep your JOBO Mirage L out of sunlight. Direct sunlight may cause damage.

Always use the eject buttons on the memory storage cards slots to remove the memory storage cards.

Do not open the case of the JOBO Mirage L. There is a risk of electric shock and there are no user

serviceable parts inside. Opening the case will void your warranty.

Do not use the Mirage L if conditions could allow condensation to occur, or damage may result.

1.3. Cleaning the LCD Screen

Treat the screen gently. The screen on the JOBO Mirage L is made of glass and can be scratched or broken. If

fingerprints or dust make the LCD screen dirty, we recommend using a soft, non-abrasive cloth such as the camera

lens cloth to clean the LCD screen. If you use the LCD Cleaning Kit sold on the market, do not apply the cleaning

liquid directly to the LCD screen. Clean the LCD screen with cleaning cloth moistened with the liquid.

THE UNIT IS LCD BY-PRODUCT,

DO NOT STRIKE BY ANY HARD OBJECT.

TO AVOID THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

1.4. Scope of delivery

JOBO Mirage L; 15inch Photo Display incl. stand

User Manual

Remote Control

USB Cable

Power Adapter

Audio/Video cable

Seite 2 von 7

��

�

��

�

ls.c

�

^All�

�

��

�

^ls�^Se

�

arch And Download.

2. Getting Started

Assemble the Mirage L stand on the back for propping stability, then plug the power adapter into an

electrical outlet.

Push the power switch at the end of Mirage L to “ON”.

2. 1. Inserting Memory Cards

The Mirage L is compatible with the following memory cards or USB Disk: Secure Digital^TMCard (SD) MultiMedia^TMCard

(MMC) Memory Stick^TM& Memory Stick Pro^TMCompactFlash^TM(CF) Card xD^®Card Insert the memory card with the front

label facing away from you. Do not force the memory card into the memory slot. If you are not able to easily insert

the memory card completely, you may have inserted it in the wrong way.

Right Side

Bottom Side

Note:The Mirage L will ONLY recognize digital pictures stored in JPEG format. Digital pictures

stored in other formats will be ignored by the device.

Seite 3 von 7

��

�

��

�

ls.c

�

^All�

�

��

�

^ls�^Se

�

arch And Download.

You will see the following screen if you insert the memory card correctly. Make sure you have at least one picture

stored on the memory card. The frame will not function properly without a stored picture.

Please select the memory card, press the button from the unit or remote control to enter the following screen.

2.2. Viewing Picture

1. You can use either the remote control or the on-board buttons to control the Mirage L.

2. Remove the plastic battery insulator (if any) on the bottom of the remote control and make sure the remote

control has a battery installed. See “Installing and replacing battery” section if you need a new battery.

3. Use the remote control to highlight and select the Photo folder (Use the direction keys Right, Left on the

remote control to navigate and press Enter to select).

4. Highlight a picture and press Enter to view the picture.

5. Press “PLAY” button to view the picture sequential.

2.3. Installing and Replacing the Remote Control Battery

1. Place the Remote Control with the control buttons facing downward.

2. While pressing down on the ridged area of the battery cover pull the tray out.

3. Place a “CR2025” lithium battery on the tray with the positive “+” end facing toward you.

4. Close the tray.

Seite 4 von 7

��

�

��

�

ls.c

�

^All�

�

��

�

^ls�^Se

�

arch And Download.

2.4. Display CLOCK&CALENDAR

Press [CLOCK] key on remote control into COLCK&CALENDAR interface, see following screen cut picture:

Press [CLOCK] key again return to main menu.

Note: Clock and Alarm settings are in the setup menu!

3. Question & Answers

This chapter will introduce some solutions to deal with the potential problems you may experience. Please consult

this section first to correct the problem. If you also cannot solve the problem, please contact the local dealer to ask

for help. Please don't try to take apart the machine by yourself at any time.

Question

Answer

What memory cards are compatible

with the Mirage L?

Secure Digital Card (SD) MultiMedia Card (MMC) Memory Stick & Memory

Stick Pro CompactFlash (CF) Card xD Card, You can also use photostorage

devices such as GIGA ONE and attach them via the USB-OTG port.

My memory card is not compatible

with the JOBO Mirage L. What can I

do?

You should be able to buy a memory card adapter that is compatible with

one of the supported memory cards.

What is the maximum picture size the

digital frame can display?

The digital frame is able to display pictures up to 16 Mega Pixels.

The Picture's best resolution is 1024x768 pixels.

What is the best picture resolution

displayed on the screen?

Seite 5 von 7

��

�

��

�

ls.c

�

^All�

�

��

�

^ls�^Se

�

arch And Download.

3.1. Specifications

Display size

Aspect ratio

Display type

Resolution

15“ / 38.10 cm

4:3

TFT LCD

1024 x 768 Pixel

16 billion

Colors

Color depth

Visible area

Brightness

24 Bit

304.2 mm (H) x 228.1mm (V)

350 cd/m²

400:1

Contrast

Viewing angle

Response time

Current entry

Power consumption

Operating voltage

140°(V), 110°(H)

3 seconds

AC110-240V 3 A

25W

12V 3A

Operation temperature: 10°-50° C, humidity: 0-85 %, non-condensating

Storage: -20°-60° C, humidity: 10-90 %, non-condensating

Environmental conditions

Internal memory

Remote control

1GB

Infrared remote control (included in delivery)

Secure Digital Card (SD)

Secure Digital High Capacity (SDHC)

MultiMedia Card (MMC)

Memory Stick,Memory Stick Pro

Compact Flash (CF)

Supported Memory Cards

xD Picture Card

1 x USB OTG – for GIGA one or other storage devices

1 x USB 2.0 High Speed – for connection to PC

Additional interfaces

Supported formats

JPEG

Representable size of image Up to 16 Megapixel photos in JPEG Format

full-screen displaying

Slideshow mode with numerous transition effects

Image rotation (+/- 90 degree)

Image zoom (fourfold)

Features

Integrated calendar and clock

Wall holder

Integrated

Seite 6 von 7

��

�

��

�

ls.c

�

^All�

�

��

�

^ls�^Se

�

arch And Download.

3.2. Included Accessories

AC Power Adapter

Stand

Remote control

USB Cable

Manual

4. Warranty and Service

4.1. Warranty conditions

This product is subject to the legal warranty periods relating to manufacturing faults and defects.

Substance of the warranty:

1. In the event of malfunctioning caused by manufacturing defects JOBO AG will repair or replace the defective product at its own discretion.

2. JOBO AG and its suppliers do not assume any liability for data losses occurring during operation of the device or consequential damage

resulting from this. Under no circumstances will JOBO AG assume liability for any direct, concrete or special damage or consequential damage

like for example damage to or loss of property or devices, loss of profits or sales, costs for spare parts, expenditure or inconvenience caused

by the interruption of service or any other damage. The user will be exclusively responsible for the loss, damage or destruction of data during

the operation of a JOBO product. Under no circumstances will JOBO AG be liable for the recreation of such data. Under no circumstances can

claims be lodged that exceed the purchase price of the product.

3. The following repairs are not covered by the warranty and must be paid for separately:

Malfunctions after the end of the legal warranty periods

Change of battery after the end of the warranty period

Change of hard disk after the end of the warranty period

Malfunctions due to incorrect operation by the user (if device is not used as described in the manual)

Malfunctions caused by other devices

Changes or damage to the device not caused by the manufacturer; especially, warranty claims will lapse if the device has been opened by

anyone other than by a JOBO AG repair workshop

Damage caused by natural disasters (acts of God)

A hard disk change during the warranty period must only be performed by JOBO. Such a change by any other party will entail the loss of all

warranty claims.

If you want to make any claims under the warranty you are asked to contact the Technical Service of JOBO AG. You will be expected to quote the serial

number of the JOBO product and may also have to submit proof of purchase to show that the warranty period has not yet elapsed.

4.2. Contact/Service

If you have any questions on or need help with our products please do not hesitate to get in touch with our Technical Service. You can reach our

service people by phone under the telephone number indicated below from Monday through Thursday from 9:00 am to 4:00 pm and on Friday from

9:00 am to 1:00 pm. Independently of these service times you can also get in touch by e-mail, fax or mail:

JOBO AG

Koelner Straße 58

D-51645 Gummersbach

Tel. 0049 2261 545-72

Fax: 0049 2261 545-42

E-mail: [email protected]

www.jobo.com

Seite 7 von 7

��

�

��

�

ls.c

�

^All�

�

��

�

^ls�^Se

�

arch And Download.

Indesit Cooktop K 642 V G User Manual
Indesit Washer WIL 163 User Manual
IOGear Network Router GHPB31 User Manual
John Lewis Cooktop JLBIGH753 User Manual
Johnson Hardware Door 1601 SERIES User Manual
JVC Car Video System VC R70P HDA User Manual
JVC CRT Television 50052496 User Manual
JVC Flat Panel Television LT 47DV8BG User Manual
Kidde Smoke Alarm PI2000CA User Manual
Kodak Camera Accessories Aptus II User Manual