|
DMZ Firewall Solution
Intel Express Routers 9515, 9525 and 9535
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Table of Contents
1
2
Introduction............................................................................................................................3
1.1 About This Document..........................................................................................................3
1.2 References............................................................................................................................3
1.3 What is a DMZ.....................................................................................................................3
1.4 IP Filters in the Express Router............................................................................................4
General Setup and Considerations .......................................................................................4
2.1 IP Address Selection ............................................................................................................4
2.2 Routing Setup.......................................................................................................................5
2.3 DNS Setup............................................................................................................................5
2.4 E-mail (SMTP) Setup...........................................................................................................5
2.5 FTP Setup.............................................................................................................................5
2.6 HTTP Setup..........................................................................................................................5
2.7 News (NNTP) Setup ............................................................................................................5
2.8 Management Access Setup...................................................................................................5
DMZ Single IP Address Solution..........................................................................................6
3.1 Static Routing Setup.............................................................................................................6
3.2 Network Address Translation (NAT) Setup.........................................................................6
3.3 IP Filters Setup.....................................................................................................................7
3.3.1 LAN1 Filters ................................................................................................................7
3.3.1.1 Receive (Rx) Filters on LAN1 .............................................................................7
3.3.1.2 Transmit (Tx) Filters on LAN1............................................................................8
3.3.2 LAN2 Filters ..............................................................................................................10
3.3.2.1 Receive (Rx) Filters on LAN2 ...........................................................................10
3.3.2.2 Transmit (Tx) filters on LAN2...........................................................................12
3.3.3 Internet Connection Filters.........................................................................................13
3.3.3.1 Receive (Rx) Filters on the connection to the Internet.......................................13
3.3.3.2 Transmit (Tx) Filters on the Connection to the Internet.....................................16
DMZ Multiple IP Address Solution....................................................................................17
4.1 IP Address Assignment......................................................................................................17
4.2 Static Routing Setup...........................................................................................................17
4.3 Network Address Translation (NAT).................................................................................18
4.4 IP Filters Setup...................................................................................................................18
4.4.1 LAN1 Filters ..............................................................................................................18
4.4.1.1 Receive (Rx) Filters on LAN1 ...........................................................................18
4.4.1.2 Transmit (Tx) Filters on LAN1..........................................................................19
4.4.2 LAN2 Filters ..............................................................................................................21
4.4.2.1 Receive (Rx) Filters on LAN2 ...........................................................................21
4.4.2.2 Transmit (Tx) filters on LAN2...........................................................................24
4.4.3 Internet Connection Filters.........................................................................................24
4.4.3.1 Receive (Rx) Filters on the Connection to the Internet......................................24
4.4.3.2 Transmit (Tx) Filters on the Connection to the Internet.....................................27
3
4
07-12-99
Version 1.0
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
1 Introduction
1.1 About This Document
This document explains how to configure a secure Internet solution using the second LAN
interface of the Intel Express router as a DMZ. The DMZ setup is explained through the use of
two example solutions, a Single IP Address Solution and Multiple IP Address.
It assumed that you have a solid understanding of networking concepts and experience in using
the Express Router.
1.2 References
[1] Intel Express Router User Guide
The user guide for your router explains in detail the basic configuration procedures used in
the set up of the DMZ.
[2] Brent Chapman, Elizabeth D. Zwicky, “ Building Internet Firewalls”, 1995 O’Reilly &
Associates. ISBN: 1-56592-124-0
1.3 What is a DMZ
For an Intel Express Router having two LAN ports, you can setup a DMZ (DeMilitarized Zone)
to increase security on your private network. A DMZ is a network off one of the LAN ports that
acts as a kind of buffer between the external (public Internet) network and your secure network
on the other LAN interface. The DMZ gives access to services required from both the external
network and the secure network. The services are typically HTTP/FTP (Web) servers for public
access, an HTTP/FTP proxy server, an SMTP server and a News (proxy) server. Mail servers and
News servers for internal use are placed on the secure network. Through the use of IP filters, you
prohibit access from the Internet to your secure network while still providing access to services
on the DMZ.
192.168.151.0
Demilitarized Zone
Http/FTP
Http/FTP
News
(Web)
proxy
proxy
server
server
server
192.168.152.0
Main LAN
SMTP
server
Internet users are allowed
to access your Web
and FTP servers
10/100
File
server
Mail
server
LAN2 port
10/100
LAN1 port
PC
PC
Intel Express
router
Internet
IP filters on the router
block unwanted traffic
destined to the main LAN
07-12-99
Version 1.0
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
The purpose of this setup is to prohibit any direct data transmission between the Internet and the
secure network. All data must go through proxy servers on the DMZ.
We recommend that you set up the DMZ on the LAN2 (10 Mbps) port and your secure network
on the LAN1 (100/10 Mbps) port.
This document provides two DMZ solutions when connecting to the Internet, one using a single
external IP address and the other using a number of IP addresses (at least four IP addresses are
needed, including network identification and broadcast address).
Note: Solutions using dynamic address assignment by the ISP are not supported.
1.4 IP Filters in the Express Router
IP filters in the Express Router are defined on a link basis. Separate filters are configured for
received data (data packets from a link to the router) and transmitted data (data packets from the
router to a link). Use the diagram below to help determine the direction of data with respect to the
router and the types of filter required (Rx or Tx).
LAN2
Rx
Tx
Tx
Rx
Rx
Intel Express
Router
Tx
LAN1
Internet
Tx - transmitted data
Rx - received data
2 General Setup and Considerations
2.1 IP Address Selection
The IP addresses on the secure network and the DMZ network can be any valid IP addresses, but
we recommend that you use designated private IP addresses or registered IP addresses. Private IP
addresses are those addresses included under Class A network 10, Class B networks 172.16
through 172.31, and Class C networks 192.168.0 through 192.168.255. Registered public IP
addresses are provided by your Internet service provider (ISP). Using registered IP addresses on
the DMZ network avoids conflicts with duplicate addresses on the Internet. On the secure
network it is preferable to use designated private IP addresses. However, if you already have
unregistered public IP addresses on your private network (for example 89.20.0.0 and 90.2.0.0),
you must use Network Address Translation (NAT) to translate these addresses to private IP
addresses.
For the single IP address solution, NAT is needed to map the network services from one public IP
address to one or more private IP addresses on the DMZ network. This makes it possible to have
several public servers on DMZ using the same public IP address.
07-12-99
Version 1.0
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
2.2 Routing Setup
Do not use RIP on the WAN interface or the DMZ interface. This prevents intruders from
corrupting the routing table.
If there is more than one internal network, the router must not be used as primary gateway
because the router configuration only allows the router to forward packets to the DMZ network.
2.3 DNS Setup
Some of the services on the DMZ network require external DNS queries. The most common mail
solution is to have a domain with an "MX" record and an "A" record pointing to the SMTP server
on the DMZ network. The DNS server is normally maintained and hosted by the ISP. The
solutions provided in this document do not support a DNS server on the DMZ network.
For more details about DNS please refer to [2].
2.4 E-mail (SMTP) Setup
Locate an SMTP server on the DMZ network to communicate with any host on the Internet and
an internal E-mail server on the secure network. Configure the SMTP server to use an MX record
in order to send the mail direct to the destination SMTP server.
2.5 FTP Setup
An HTTP/FTP proxy server on the DMZ network must use passive FTP for connections to the
Internet. Otherwise the filters will block the FTP data channel running on port 20. Because the
HTTP/FTP is an application proxy, support for DNS is required to resolve fully qualified domain
names into IP addresses.
2.6 HTTP Setup
An HTTP/FTP proxy normally runs on port 80 or 8080. However, the filter settings for the
following setups are based on port 80. Because the HTTP/FTP is an application proxy, support
for DNS is required to resolve fully qualified domain names into IP addresses.
2.7 News (NNTP) Setup
If you are using a News (NNTP) server on your secure network, it is required that you locate a
News (proxy) server on the DMZ. With this setup, the News server on the secure network
communicates with the News (proxy) server on the DMZ which, in turn, communicates with an
external News server on the Internet. The advantage of this setup is that all private news groups
are placed on the internal server, protected from the Internet.
2.8 Management Access Setup
To ensure security, you must disable management access (SNMP, Telnet, and TFTP)
on the WAN (Internet) link and the LAN2 (DMZ) link. For additional security, disable
management access on the LAN1 link also. With this setup, all management tasks can
only be performed from the console port.
07-12-99
Version 1.0
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
3 DMZ Single IP Address Solution
This solution explains how to set up a DMZ solution when the Internet service provider (ISP) has
assigned a single IP address to your network.
HTTP/FTP
(Web)
server
News
(proxy)
server
HTTP/FTP
proxy
server
SMTP
server
10.2.0.1
10.2.0.4
10.2.0.2 10.2.0.3
DMZ
10.2.0.0
Mail
server
10.5.0.1
DNS
server
194.25.6.4
LAN2 port
10.2.0.10
News
server
10.5.0.2
LAN1 port
10.5.0.10
News
(NNTP)
server
Intel Express
Router
Internet
196.24.5.8
Users
Secure LAN
10.5.0.0
In the example, the DMZ network connects to the LAN2 port and is on the 10.2.0.0/16 subnet.
The LAN2 port has been assigned an IP address of 10.2.0.10. The secure private network
connects to the LAN1 port and is on the 10.5.0.0/16 subnet. The LAN1 port has been assigned an
IP address of 10.5.0.10.
Note: The services available on the DMZ can be placed on a single server. If this is done, you
must configure NAT entries and filters accordingly.
3.1 Static Routing Setup
Configure static routing as follows:
•
Configure static routing on the Internet connection, LAN1, and LAN2. This is done in
Advanced Setup by setting the Routing Protocol parameter to None/Static.
•
Define a static route on the WAN interface to the Internet. Use the default static route setting
(network address of 0.0.0.0 and netmask 0.0.0.0) as shown in the example below.
3.2 Network Address Translation (NAT) Setup
The devices on the DMZ have been assigned private IP addresses. You must set up NAT to
translate the private IP addresses on the DMZ to the external IP address assigned by the ISP. This
will map services (i.e. port numbers) on the external IP address to servers on the DMZ.
07-12-99
Version 1.0
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Note The order of the NAT entries is important.
NAT entries are defined as follows:
Entry Function
Settings
1
Directs all incoming HTTP
requests to the Web server.
Mapping type:
Internal address:
Internal port:
Static Port (Single IP)
10.2.0.1
80
External IP address:
External port:
Mapping type:
Internal address:
Internal port:
<IP address from ISP>
80
2
Directs all incoming FTP
requests to the Web server.
Static Port (Single IP)
10.2.0.1
21
External IP address:
External port:
Mapping type:
Internal address:
Internal port:
<IP address from ISP>
21
3
4
Directs all incoming SMTP
requests to the SMTP server
Static Port (Single IP)
10.2.0.3
25
<IP address from ISP>
25
External address:
External port
Directs all incoming NNTP
requests to the News server.
Type:
Static Port (Single IP)
10.2.0.4
119
<IP address from ISP>
119
Internal address:
Internal port:
External IP address:
External port:
Type:
5
Directs all other incoming
traffic to the DMZ.
Network to single IP
10.2.0.0
<IP address from ISP>
Internal address:
External IP address:
3.3 IP Filters Setup
This section describes the required IP filters for the LAN1, LAN2 and connection to the Internet.
3.3.1 LAN1 Filters
3.3.1.1 Receive (Rx) Filters on LAN1
Configure these receive filters for the LAN1 port, shown as they appear in Advanced Setup.
07-12-99
Version 1.0
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filters are defined as follows:
Filter Function
Settings
—
Prohibit users on the secure network
access to the Internet
Default Action:
Discard
1
Allows access to the HTTP /FTP
proxy server on the DMZ.
Action:
Protocol:
Pass
All
Dest. address type:
Dest. address:
Src. address type:
Host
10.2.0.2
All
2
3
4
Allows access to the SMTP server on Action:
Pass
All
Host
10.2.0.3
All
Pass
All
Host
10.2.0.4
All
Pass
All
the DMZ.
Protocol:
Dest. address type:
Dest. address:
Src. address type:
Allows access to News (proxy) server Action:
on the DMZ.
Protocol:
Dest. address type:
Dest. address:
Src. address type:
Action:
Allows access to the router from the
private LAN.
Protocol:
Dest. port address:
Dest. address:
Scr. address type:
Host
<LAN1 IP address>
All
3.3.1.2 Transmit (Tx) Filters on LAN1
Configure these transmit filters for the LAN1 port, shown as they appear in Advanced Setup.
Filters are defined as follows:
Filter Function
Settings
—
Prohibit users on the secure network
access to the Internet
Allows HTTP and FTP (read only using Action:
Default Action:
Discard
1
Pass
TCP
ACK
All
>1023
Host
HTTP) from secure LAN to HTTP/FTP
proxy server on the DMZ.
Protocol:
TCP flags:
Dest. address type:
Dest. port:
Src. address type:
07-12-99
Version 1.0
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Src. address:
Src. port:
10.2.0.2
= 80
2
3
4
Allows FTP (only passive connections)
from secure LAN to the FTP proxy
server on the DMZ (see note 1).
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. port:
Src. address type:
Src. address:
Src. port:
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. port:
Src. address type:
Src. address:
Src. port:
Pass
TCP
ACK
All
>1023
Host
10.2.0.2
= 21
Pass
TCP
ACK
All
>1023
Host
10.2.0.2
>1023
Pass
Two filters are required.
Action:
Protocol:
Allows incoming mail (SMTP) from
DMZ to secure LAN.
TCP
TCP flags:
All
Dest. address type:
Dest. address:
Dest. port:
Host
10.5.0.1
= 25
Src. address type:
Src. address:
Src. port:
Host
10.2.0.3
> 1023
Pass
Action:
5
Allows outgoing mail (SMTP) from
secure LAN to DMZ.
Protocol:
TCP
TCP flags:
ACK
Host
10.5.0.1
> 1023
Host
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
10.2.0.3
= 25
Action:
Protocol:
Pass
TCP
6
Allows incoming News (NNTP) from
DMZ to secure LAN (see note 2).
TCP flags:
All
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
Host
10.5.0.2
= 119
Host
10.2.0.4
> 1023
Pass
Action:
7
Allows outgoing News (NTTP) to DMZ
from secure LAN.
Protocol:
TCP
TCP flags:
Dest. address type:
ACK
Host
07-12-99
Version 1.0
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Dest. address:
Dest. port:
10.5.0.2
> 1023
Src. address type:
Src. address:
Src. port:
Host
10.2.0.4
= 119
Action:
Protocol:
Pass
TCP
8
Sends all packets generated by the router
to the secure LAN (LAN1).
TCP flags:
All
Dest. address type:
Dest. port:
All
All
Src. address type:
Src. address:
Src. port:
Host
<LAN1 IP address>
All
Note 1: Some proxy servers, such as Microsoft Proxy* 2.0, do not support FTP proxy using the
FTP protocol. For upload and download using a special FTP program like WS_FTP*, an
additional FTP proxy on DMZ is required. This proxy server normally runs on port 21 and has to
support passive FTP. If download from an Internet browser is sufficient, the two filters are not
required.
Note 2: The filter is not required when using a News proxy server on DMZ.
3.3.2 LAN2 Filters
3.3.2.1 Receive (Rx) Filters on LAN2
Configure these receive filters for the LAN2 port, shown as they appear in Advanced Setup.
×
07-12-99
Version 1.0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filters are defined as follows:
Filter Function
Settings
—
1
Pass all packets destined for DMZ
Prevents RIP updates from entering the Action:
DMZ network
Default Action:
Pass
Discard
UDP
All
Protocol:
Dest. address type:
Dest. port:
RIP
Src. address type:
Src. port:
All
All
2
3
4
5
6
7
Prevents tunnel packets from entering
the DMZ network
Action:
Protocol:
Dest. address type:
Dest. port:
Src. address type:
Src. port:
Action:
Protocol:
Dest. address type:
Dest. port :
Src. address type:
Src. port :
Action:
Protocol:
Dest. address type:
Dest. port :
Src. address type:
Src. port :
Action:
Protocol:
Dest. address type:
Dest. port :
Src. address type:
Src. port :
Action:
Protocol:
Dest. address type:
Dest. port:
Src. address type:
Src. port:
Action:
Protocol:
Dest. address type:
Dest. port:
Scr. address type:
Src. port :
Discard
TCP
All
Tunnel
All
All
Prevents RSVP packets from entering
the DMZ network/router.
Discard
RSVP
All
All
All
Three separate filters are required.
All
Discard
UDP
All
= 1698
All
All
Discard
UDP
All
= 1699
All
All
Prevents BootP updates from entering
the DMZ network/router.
Discard
UDP
All
67
All
All
Prevents Syslog updates from entering
the DMZ network/router
Discard
UDP
All
= 514
All
All
Discards all packets that spoof (or fake)
the IP address of the router on LAN1.
This is necessary since these packets
will pass the Tx filter on LAN1.
8
Action:
Protocol:
Dest. address type:
Dest. port:
Discard
UDP
All
All
07-12-99
Version 1.0
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Scr. address type:
Src. address:
Src. port :
Host
<LAN1 IP address>
All
Discards all ICMP packets entering the
DMZ network. This prevents the router
from reporting the IP netmask.
9
Action:
Protocol:
Dest. address type:
Scr. address type:
Action:
Discard
ICMP
All
All
Discard
UDP
Discards all packets to open router
ports.
10
Protocol:
Dest. address type:
Dest. address:
Dest. port:
Host
Four filters are required.
<LAN1 IP address>
All
Src. address type:
Src. port:
All
All
11
12
Action:
Protocol:
Discard
UDP
Host
<LAN2 IP address>
All
All
All
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. port:
Action:
Discard
Protocol:
TCP
Flags:
All
Dest. address type:
Dest. address:
Dest. port:
Host
<LAN1 IP address>
All
Src. address type:
Src. port:
All
All
13
Action:
Discard
Protocol:
TCP
flags:
All
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. port:
Host
<LAN2 IP address>
All
All
All
3.3.2.2 Transmit (Tx) filters on LAN2
To pass all packets transmitted from the DMZ, set the default action to Pass.
07-12-99
Version 1.0
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
3.3.3 Internet Connection Filters
3.3.3.1 Receive (Rx) Filters on the connection to the Internet
Configure these receive filters for the Internet connection, shown as they appear in Advanced
Setup.
×
Filters are defined as follows:
Filter Function
Settings
—
Prohibit users on the secure network
Default Action:
Discard
from accessing the Internet.
1
Allows HTTP from the Internet to the
HTTP/FTP server on the DMZ.
Action:
Protocol:
TCP flags:
Pass
TCP
All
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. port:
Host
10.2.0.1
= 80
All
> 1023
07-12-99
Version 1.0
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
2
3
4
Allows FTP (both active and passive)
from the Internet to the HTTP/FTP
server on the DMZ.
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. port:
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. port:
Pass
TCP
All
Host
10.2.0.1
= 21
All
> 1023
Pass
TCP
ACK
Host
10.2.0.1
= 20
All
> 1023
Pass
Three filters are required.
Action:
Protocol:
TCP
TCP flags:
All
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. port:
Host
10.2.0.1
>1023
All
>1023
5
6
Allows external ping to HTTP/FTP
server on the DMZ.
Action:
Protocol:
Dest. address type:
Dest. address:
Src. address type:
Pass
ICMP
Host
10.2.0.1
All
Allows external HTTP from HTTP/FTP Action:
Pass
proxy on the DMZ.
Protocol:
TCP
TCP flags:
ACK
Host
10.2.0.2
> 1023
All
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. port:
= 80
7
Allows external FTP from the
HTTP/FTP proxy server on the DMZ
(see note 1).
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. port:
Pass
TCP
ACK
Host
10.2.0.2
> 1023
All
Two filters are required.
= 21
8
Action:
Pass
Protocol:
TCP
TCP flags:
Dest. address type:
ACK
Host
07-12-99
Version 1.0
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Dest. address:
Dest. port
Src. address type:
Src. port:
10.2.0.2
> 1023
All
> 1023
Pass
9
Allows DNS reply to the HTTP/FTP
proxy server on the DMZ.
Action:
Protocol:
TCP
TCP flags:
ACK
Two filters are required.
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Host
10.2.0.2
> 1023
Host
194.25.6.4
= 53
10
11
Action:
Protocol:
Pass
UDP
Host
10.2.0.2
> 1023
Host
194.25.6.4
= 53
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Allows DNS reply to the SMTP server
on the DMZ.
Action:
Protocol:
Pass
TCP
TCP flags:
ACK
Two filters are required.
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Host
10.2.0.3
> 1023
Host
194.25.6.4
= 53
12
13
Action:
Protocol:
Pass
UDP
Host
10.2.0.3
> 1023
Host
194.25.6.4
= 53
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Allows incoming mail (SMTP) from
any host on the Internet to the DMZ.
Action:
Protocol:
Pass
TCP
TCP flags:
All
Dest. address type:
Dest. address:
Dest. port
Host
10.2.0.3
= 25
Src. address type:
Src. port:
Action:
All
> 1023
Pass
14
Allows outgoing mail (SMTP) to any
host on the Internet from the DMZ.
Protocol:
TCP
TCP flags:
ACK
07-12-99
Version 1.0
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. port:
Host
10.2.0.3
> 1023
All
= 25
15
Allows incoming News (NNTP) from a Action:
Pass
specified external News server to the
DMZ (see note 2).
Protocol:
TCP flags:
TCP
All
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
Host
10.2.0.4
= 119
Host
196.24.5.8
> 1023
Pass
Action:
16
Allows outgoing News (NNTP) to a
specified external News server from the
DMZ.
Protocol:
TCP flags:
TCP
ACK
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
Host
10.2.0.4
> 1023
Host
196.24.5.8
119
Note 1: Only passive FTP connections are supported. The HTTP/FTP proxy must be configured
to use a passive FTP connection.
Note 2: The filter is not required when using a News proxy server on DMZ.
3.3.3.2 Transmit (Tx) Filters on the Connection to the Internet
Set the default action to Pass.
07-12-99
Version 1.0
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
4 DMZ Multiple IP Address Solution
This solution explains how to set up a DMZ when the ISP supplies you with multiple IP
addresses. In the example, the ISP has assigned the site a range of IP addresses: 193.84.251.0 to
193.84.251.7 (subnet mask 255.255.255.248).
HTTP/FTP
HTTP/FTP
server
proxy
server
SMTP
server
News
server
193.84.251.1 193.84.251.2 193.84.251.3 193.84.251.4
DMZ
193.84.251.0
Mail
server
89.20.0.1
DNS
server
194.25.6.4
LAN2 port
193.84.251.5
News
server
89.20.0.2
LAN1 port
89.20.0.10
News
(NNTP)
server
Intel Express
Router
Layer 3 switch
Internet
196.24.5.8
10/100
Users
Secure LAN
89.20.0.0
Secure LAN
90.20.0.0
Note: The services available on the DMZ can be placed on a single server. If this is done, you
must configure NAT accordingly.
The solution does not configure NAT on the WAN interface (connection to the Internet). This
eliminates problems with protocols that are not supported by the router’s NAT implementation.
4.1 IP Address Assignment
The servers on the DMZ network have been assigned official public IP addresses. NAT is not
required for these addresses. The secure private LAN consists of two networks, 89.20.0.0 and
90.2.0.0, which are official public IP addresses. You must use NAT to translate these addresses to
private IP addresses.
Note: The first and last IP address in the range provided by the ISP must not be used for devices.
The WAN connection to the Internet must be configured as unnumbered.
4.2 Static Routing Setup
Configure static routing as follows:
•
Configure static routing on the Internet connection, LAN1, and LAN2. This is done in
Advanced Setup by setting the Routing Protocol parameter to None/Static.
•
Define a static route on the WAN interface to the Internet. Use the default static route setting
(network address of 0.0.0.0 and network address of 0.0.0.0) as shown in the example below.
07-12-99
Version 1.0
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
4.3 Network Address Translation (NAT)
Because the secure private networks on LAN1 use public IP addresses (89.20.0.0 and 90.20.0.0),
configure NAT to translate these addresses to private IP addresses. For example, NAT will
translate the E-mail server address from 89.20.0.1 to 10.1.0.1, the NNTP server address from
89.20.0.2 to 10.1.0.2, and the LAN1 address from 89.20.0.10 to 10.1.0.10.
Note: When adding filter entries, the internal addresses must be used.
NAT entries are defined as follows:
Entry Function
Settings
1
2
Translate the internal IP
Mapping type:
Internal address:
Internal mask:
External IP address:
External mask:
Mapping type:
Internal address:
Internal mask:
External IP address:
External mask:
Static
10.1.0.0
addresses on the network
89.20.0.0 to private IP
address on 10.1.0.0
255.255.0.0
89.20.0.0
255.255.0.0
Static
10.2.0. 0
255.255.0.0
90.20.0.0
255.255.0.0
Translate the internal IP
addresses on the network
90.20.0.0 to private IP
address on 10.2.0.0
4.4 IP Filters Setup
This section describes the required IP filters for the LAN1, LAN2 and connection to the Internet.
4.4.1 LAN1 Filters
4.4.1.1 Receive (Rx) Filters on LAN1
Configure these receive filters for the LAN1 port, shown as they appear in Advanced Setup.
07-12-99
Version 1.0
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filters are defined as follows:
Filter Function
Settings
—
Prohibit internal users access to the
Internet
Default Action:
Default
1
Allows access to the HTTP /FTP proxy Action:
Pass
server on the DMZ.
Protocol:
All
Dest. address type:
Dest. address:
Src. address type:
Action:
Host
193.84.251.2
All
Pass
All
Host
193.84.251.3
all
Pass
All
Host
193.84.251.4
All
Pass
All
2
3
4
Allows access to the SMTP server on
the DMZ.
Protocol:
Dest. address type:
Dest. address:
Src. address type:
Action:
Allows access to News (proxy) server
on the DMZ.
Protocol:
Dest. address type:
Dest. address:
Src. address type:
Action:
Allows access to the router from the
private LAN.
Protocol:
Dest. port address:
Dest. address:
Scr. address type:
Host
<LAN1 IP address>
All
4.4.1.2 Transmit (Tx) Filters on LAN1
Configure these transmit filters for the LAN1 port, shown as they appear in Advanced Setup.
Filters are defined as follows:
Filter Function
Settings
—
Prohibit users on the private network
from accessing the Internet
Default Action:
Discard
1
Allows HTTP and FTP (read only using Action:
HTTP) from secure LAN to HTTP/FTP Protocol:
Pass
TCP
proxy server on the DMZ.
TCP flags:
ACK
Dest. address type:
Dest port:
Src. address type:
Src. address:
All
>1023
Host
193.84.251.2
07-12-99
Version 1.0
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Src. port:
= 80
2
3
4
Allows FTP (only passive connections) Action:
Pass
TCP
ACK
All
>1023
Host
193.84.251.2
= 21
Pass
TCP
from secure LAN to the FTP proxy
server on the DMZ (see note 1).
Protocol:
TCP flags:
Dest. address type:
Dest port:
Two filters are required.
Src. address type:
Src. address:
Src. port:
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. port:
Src. address type:
Src. address:
Src. port:
ACK
All
> 1023
Host
193.84.251.2
> 1023
Pass
Action:
Protocol:
Allows incoming mail (SMTP) from
DMZ to the secure LAN.
TCP
TCP flags:
All
Dest. address type:
Dest. address:
Dest. port:
Host
10.1.0.1
25
Src. address type:
Src. address:
Src. port:
Host
193.84.251.3
> 1023
Pass
Action:
5
6
7
Allows outgoing mail (SMTP) from
secure LAN to the DMZ.
Protocol:
TCP flags:
TCP
ACK
Host
10.1.0.1
> 1023
Host
193.84.251.3
25
Pass
TCP
All
Host
10.1.0.2
119
Host
193.84.251.4
> 1023
Pass
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
Allows incoming News (NNTP) from
the DMZ to the secure LAN (see note
2).
Action:
Protocol:
Allows outgoing News (NNTP) to
DMZ from secure LAN.
TCP
TCP flags:
ACK
Dest. address type:
Dest. address:
Host
10.1.0.2
07-12-99
Version 1.0
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Dest. port:
> 1023
Src. address type:
Src. address:
Src. port:
Host
193.84.251.4
119
Action:
Protocol:
Pass
TCP
8
Sends all packets generated by the
router to the internal LAN (LAN1).
TCP flags:
All
Dest. address type:
Dest. port:
All
All
Src. address type:
Src. address:
Src. port:
Host
<LAN1 IP address>
All
Note 1: Some proxy servers, such as Microsoft Proxy* 2.0, do not support FTP proxy using the
FTP protocol. For uploading and downloading using a special FTP program, such as WS_FTP*,
an additional FTP proxy on DMZ is required. This proxy server normally runs on port 21, and it
has to support passive FTP. If downloading from an Internet browser is sufficient, the two filters
are not required.
Note 2: The filter is not required when using a News proxy server on DMZ.
4.4.2 LAN2 Filters
4.4.2.1 Receive (Rx) Filters on LAN2
Configure these receive filters for the LAN2 port, shown as they appear in Advanced Setup.
×
Filters are defined as follows:
Filter Function
Settings
—
1
Pass all packets destined for DMZ
Prevents RIP updates from entering the Action:
DMZ network
Default Action:
Pass
Discard
UDP
All
Protocol:
Dest. address type:
Dest port:
RIP
07-12-99
Version 1.0
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Src. address type:
Src. port:
All
All
2
3
4
5
6
7
Prevents tunnel packets from entering
the DMZ network
Action:
Protocol:
Dest. address type:
Dest port:
Src. address type:
Src. port:
Action:
Protocol:
Dest. address type:
Dest. port :
Src. address type:
Src. port :
Action:
Protocol:
Dest. address type:
Dest. port :
Src. address type:
Src. port :
Action:
Protocol:
Dest. address type:
Dest. port :
Src. address type:
Src. port :
Action:
Protocol:
Dest. address type:
Dest. port:
Src. address type:
Src. port:
Action:
Protocol:
Dest. address type:
Dest. port:
Discard
TCP
All
Tunnel
All
All
Prevents RSVP packets from entering
the DMZ network/router. Three
separate filters are required.
Discard
RSVP
All
All
All
All
Discard
UDP
All
1698
All
All
Discard
UDP
All
1699
All
All
Prevents BootP updates from entering
the DMZ network/router.
Discard
UDP
All
67
All
All
Prevents Syslog updates from entering
the DMZ network/router
Discard
UDP
All
514
Scr. address type:
Src. port :
All
All
Discards all packets that fake the IP
address of the router on LAN1 as these
packets are allowed to pass the Tx filter
on LAN1
8
Action:
Protocol:
Dest. address type:
Dest. port:
Discard
UDP
All
All
Scr. address type:
Src. address:
Src. port :
Host
<LAN1 IP address>
All
07-12-99
Version 1.0
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Discards all ICMP packets entering the
DMZ network. This prevents the router
from reporting the IP netmask. These
filters must include all IP addresses on
the router, including the WAN IP
address if the router is using numbered
links.
9
Action:
Protocol:
Dest. address type:
Dest. address:
Scr. address type:
Discard
ICMP
Host
<LAN1 IP address>
All
10
11
Action:
Protocol:
Dest. address type:
Dest. address:
Scr. address type:
Action:
Discard
ICMP
Host
<LAN2 IP address>
All
Discard
UDP
Two filters are required.
Discards all packets to open router
ports.
Protocol:
dest address type:
dest address:
Dest. port:
Host
Four filters are required.
<LAN1 IP address>
All
Src. address type:
Src. port:
All
All
12
13
Action:
Protocol:
Discard
UDP
Host
<LAN2 IP address>
All
All
All
dest address type:
dest address:
Dest. port:
Src. address type:
Src. port:
Action:
Discard
Protocol:
TCP
Flags:
All
dest address type:
dest address:
Dest. port:
Host
<LAN1 IP address>
All
Src. address type:
Src. port:
All
All
14
Action:
Discard
Protocol:
TCP
flags:
All
dest address type:
dest address:
Dest. port:
Src. address type:
Src. port:
Host
<LAN2 IP address>
All
All
All
07-12-99
Version 1.0
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
4.4.2.2 Transmit (Tx) filters on LAN2
Set the default action to Pass.
4.4.3 Internet Connection Filters
4.4.3.1 Receive (Rx) Filters on the Connection to the Internet
The required receive filters for the Internet connection, shown as they appear in Advanced
Setup.
×
Filters are defined as follows:
Filter Function
Settings
—
Prohibit users on the secure network
Default Action:
Discard
from accessing the Internet
1
Allows HTTP from the Internet to the
HTTP/FTP server on the DMZ.
Action:
Protocol:
Pass
TCP
TCP flags:
All
Dest. address type:
Dest. address:
dest port:
Host
193.84.251.1
= 80
Src. address type:
All
07-12-99
Version 1.0
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Src. port:
Action:
> 1023
Pass
2
3
4
Allows FTP (both active and passive)
from the Internet to the HTTP/FTP
server on the DMZ.
Protocol:
TCP flags:
TCP
All
Host
193.84.251.1
= 21
All
> 1023
Pass
TCP
ACK
Host
193.84.251.1
= 20
All
> 1023
Pass
Dest. address type:
Dest. address:
dest port:
Src. address type:
Src. port:
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. address:
dest port:
Src. address type:
Src. port:
Three filters are required.
Action:
Protocol:
TCP
TCP flags:
All
Dest. address type:
Dest. address:
dest port:
Src. address type:
Src. port:
Host
193.84.251.1
>1023
All
>1023
5
6
Allows external ping to HTTP/FTP
server on the DMZ.
Action:
Protocol:
Dest. address type:
Dest. address:
Src. address type:
Pass
ICMP
Host
193.84.251.1
All
Pass
Allows external HTTP from HTTP/FTP Action:
proxy on the DMZ.
Protocol:
TCP
TCP flags:
ACK
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. port:
Host
193.84.251.2
> 1023
All
= 80
7
8
Allows external FTP from HTTP/FTP
proxy server on the DMZ (see note 1).
Action:
Protocol:
TCP flags:
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. port:
Pass
TCP
ACK
Host
193.84.251.2
> 1023
All
> 1023
Pass
Two filters are required.
Action:
Protocol:
TCP
TCP flags:
ACK
07-12-99
Version 1.0
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. port:
Host
193.84.251.2
> 1023
All
= 21
9
Allows DNS reply to the HTTP/FTP
proxy server on the DMZ.
Action:
Protocol:
Pass
TCP
TCP flags:
ACK
Two filters are required.
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Host
193.84.251.2
> 1023
Host
194.25.6.4
= 53
10
11
Action:
Protocol:
Pass
UDP
Host
193.84.251.2
> 1023
Host
194.25.6.4
= 53
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Allows DNS reply to the SMTP server
on the DMZ.
Action:
Protocol:
Pass
TCP
TCP flags:
ACK
Two filters are required.
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Host
193.84.251.3
> 1023
Host
194.25.6.4
= 53
12
13
Action:
Protocol:
Pass
UDP
Host
193.84.251.3
> 1023
Host
194.25.6.4
= 53
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. address:
Src. port:
Allows incoming mail (SMTP) from
any host on the Internet to the DMZ.
Action:
Protocol:
Pass
TCP
TCP flags:
All
Dest. address type:
Dest. address:
Dest. port
Host
193.84.251.3
= 25
Src. address type:
Src. port:
All
> 1023
07-12-99
Version 1.0
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DMZ Firewall Solution for the Express Router
Filter Function
Settings
14
Allows outgoing mail (SMTP) to any
host on the Internet from the DMZ.
Action:
Protocol:
Pass
TCP
TCP flags:
ACK
Dest. address type:
Dest. address:
Dest. port
Src. address type:
Src. port:
Host
193.84.251.3
> 1023
All
= 25
15
Allows incoming News (NNTP) from a Action:
Pass
specified external News server to the
DMZ (see note 2).
Protocol:
TCP flags:
TCP
All
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
Host
193.84.251.4
= 119
Host
196.24.5.8
> 1023
Pass
Action:
16
Allows outgoing News (NNTP) to a
specified external News server from the
DMZ.
Protocol:
TCP flags:
TCP
ACK
Dest. address type:
Dest. address:
Dest. port:
Src. address type:
Src. address:
Src. port:
Host
193.84.251.4
> 1023
Host
196.24.5.8
= 119
Note 1: Only passive FTP connections are supported. The HTTP/FTP proxy must be configured
to use a passive FTP connection.
Note 2: The filter is not required when using a News proxy server on DMZ.
4.4.3.2 Transmit (Tx) Filters on the Connection to the Internet
Set the default action to Pass. No individual filters are required.
07-12-99
Version 1.0
27
Download from Www.Somanuals.com. All Manuals Search And Download.
|