|
EX-98211
Fanless Intel Celeron/Pentium M
Box PC
Quick Installation Guide
Version 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Packing List
After opening the package, carefully inspect the contents. If any of items is missing or
appears damaged, please contact with your local dealer or distributor. The package
should contain the following items:
ꢀ
ꢀ
ꢀ
1 x EX-98211 Box PC
2 x EPE FOAM
1 x Accessory Box (CD/Quick Installation Guide/Screw/Cable)
1.3 System
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 Power Information
1.5 I/O Ports Arrangement
The EX-98211 has 4 serial ports, 6 USB (Host) ports, and 2 RJ-45 LAN ports. The
arrangement of these ports is shown in Figure 1.1 & Figure 1.2
1.5.1 Front View
Figure 1.1: Front View of EX-98211
1.5.2 Back View
Figure 1.2: Back View of EX-98211
Download from Www.Somanuals.com. All Manuals Search And Download.
1.6 Dimensions
‧ Dimension (W x H x D): 195 x 268 x 80 mm (7.68" x 10.55" x 3.15")
Figure 1.3: Dimensions
Chapter2 The Engine of EX-98211
2.1 Introduction
The engine of EX-98211 is constructed by the combination of one PCBA board. Such a combination
makes system customization feasible.
Figure 2.1: EX-98211 Main Board Top View
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2.2: EX-98211 Main Board Bottom View
2.2 Jumpers and Connectors
EX-98211 Main Board Jumper Setting
Download from Www.Somanuals.com. All Manuals Search And Download.
EX-98211 Main Board Connector Setting
Download from Www.Somanuals.com. All Manuals Search And Download.
JRS1 RS-232/422/485 Selection
JP1 LAN LED Connector
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE1: Primary IDE Connector
Connector type: One onboard 44-pin box headers, primary IDE
Download from Www.Somanuals.com. All Manuals Search And Download.
CFD1: Compact Flash Disk (Share IDE1)
Connector type: 50-pin compact flash type I/II
LPT1: Parallel Port Connector
Connector type: D-Sub 25-pin female.
SATA1~2: S-ATA1 Connector
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN1/LAN2 Connector (USB Port 1, 2 ~ USB Port 3, 4)
Connector: This connector supports USB 2.0 x 4.
Type: USB 2.0 x 4
USB1 Connector (USB Port 5, 6)
VGA1: CRT Connector
Connector type: D-Sub 15-pin female.
DVI1: DVI Connector
Download from Www.Somanuals.com. All Manuals Search And Download.
CN1: (COM1~4 +GPIO 2 In/2 Out Option RS422/485 output)
IR1: Infrared (IR) Connector
KBM1: PS/2 Keyboard & Mouse
Connector type: external 6-pin Mini DIN connector on bracket
AUDIO1: Audio Interface Port
PWRIN1: DC Adapter Power Input
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-422/485, GPIO Function Jumper
Chapter 3 Maintenance
Hardware Installation
The EX-98211 is designed to be modular, slim and lightweight for easier
maintenance. The following section describes simple hardware installations.
3.1 Remove Top Cover
1. Locate 6 screws which secure the top cover.
2. Use screw driver to remove the top cover screws. Keep the screws safelyfor later use.
3. Pull the top cover slightly upward.
3.2 Installing CPU
1. Locate 6 screws which secure the Thermal Lump.
2. Use screw driver to remove the 6 screws. Keep the screws safely for later
use.
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The processor socket comes with a screw to secure the CPU. As showing
in the picture bellow, loose the screw first before inserting the CPU.
4. Place the CPU into the socket by making sure the notch on the corner
of the CPU corresponding with the notch on the inside of the socket. Once
the CPU has slid into the socket, lock the screw.
5. The contact area and gap between the processor and the heatsink
require a thermal pad or thermal paste. Make sure that heatsink of the
CPU top surface is in complete contact to avoid the CPU overheating
problem. If not, it would cause your system or CPU to be hanged,
unstable, or damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Installing Memory Module
1. Locate the 240-pin LONG DIMM sockets.
2. Align the LONG DIMM on the socket and let the notch on the LONG DIMM meet the break on socket.
3. Firmly insert the LONG DIMM into the socket.
3.4 Installing CF Card
1. Locate 2 screws which secure the Thermal Lump of South Bridge.
2. Use screw driver to remove the 2 screws. Keep the screws safely for later
use.
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remove the Thermal Lump of South Bridge.
4. To install a Compact Flash Memory Card into the Main Board, align the
notch on the card with the Compact Flash socket in the Main Board. Then
firmly insert the card into the socket until it is completely seated.
3.5 Remove Bottom Cover
1. Unscrew 6 screws which secure the bottom cover.
2. Use screw driver to remove the bottom cover screws. Keep the screws
safely for later use.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Installing Hard Disk Drive
1. Upside down the Box PC. Remove the Bottom Cover.
2. Locate the 4 screws on the HDD Holder Bracket.
3. Use screw drvier to remove the screws. Keep the screws safely for later
use.
4. Put the HDD into the HDD Holder Bracket and screw it on.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect the SATA cable between the HDD and the Main Board.
3.7 Installing Riser Card
1. Insert PCI card into the PCI slot.
2. Locate the screw on the slot bracket.
3. Use screw driver to remove the screw. Keep the screw safely for later use.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.8 Installing Wall-mount Bracket
1. Upside down the Box PC. Please locate the 8 screw holes on the bottom
cover.
2. Match the screws on the wall-mount kit and screws onto the main unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
|