Intel Computer Hardware PMB 601LF User Manual
USER’S  
MANUAL  
PMB-601LF  
Intel® Core 2 Duo  
ATX Motherboard  
With VGA/Sound/2LAN  
PMB-601LF M1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright Notice  
FCC NOTICE  
This equipment has been tested and found to comply with the limits for a  
Class A digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful  
interference when the equipment is operated in  
a
commercial  
environment. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instruction manual, may cause harmful interference to radio  
communications. Operation of this equipment in a residential area is  
likely to cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
You are cautioned that any change or modifications to the equipment not  
expressly approve by the party responsible for compliance could void  
your authority to operate such equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
TABLE OF CONTENTS  
CHAPTER 1 INTRODUCTION  
1-1  
1-2  
1-3  
About This Manual ........................................................ 1-2  
System Specification ...................................................... 1-3  
Safety Precautions .........................................................  
1-6  
CHAPTER 2 HARDWARE CONFIGURATION  
2-1  
2-2  
2-3  
2-4  
2-5  
2-6  
2-7  
2-8  
2-9  
Jumper & Connector Quick Reference Table ................ 2-2  
Component Locations .................................................... 2-3  
How to Set the Jumpers ................................................. 2-4  
COM Port Connector ……..…………………………... 2-6  
COM3 RI & Voltage Selection …………..……………. 2-8  
COM4 RI & Voltage Selection ………………………  
RS232/422/485(COM2) Selection ................................  
2-9  
2-10  
Keyboard and PS/2 Mouse Connector .....................….. 2-11  
Reset Connector ............................................................ 2-11  
2-10 Hard Disk Drive LED Connector .................................. 2-12  
2-11 ATX Power Button ….................................................... 2-12  
2-12 External Speaker Connector .......................................... 2-12  
2-13 PLED Connector …….................................................... 2-13  
2-14 KeyLock Connector ..…………………………………  
2-13  
2-15 External SMI Connector ……………………………… 2-13  
2-16 Clear CMOS Data Selection …………………………  
2-17 CPU Fan Connector …………………………………..  
2-14  
2-14  
2-18 System Fan Connector ………………………………… 2-15  
2-19 Power Fan Connector ………………………………….. 2-15  
2-20 NB Fan Connector …………………………………….. 2-15  
2-21 VGA Connector …………………..…………………… 2-16  
2-22 Serial ATA Connector ………………………………… 2-17  
2-23 Floppy Disk Drive Connector .......................................  
2-24 Printer Connector ..........................................................  
2-25 Universal Serial Bus Connector ………………………  
2-26 IrDA Connector ……………………………………….  
2-27 USB & LAN Connector ………………………………  
2-28 ATX Power Connector ……………………………….  
2-19  
2-20  
2-21  
2-22  
2-23  
2-25  
2-29 Sound Connector ……………………………………… 2-26  
2-30 CD Audio-In Connector ………………………………. 2-27  
2-31 Memory Installation …………………………………..  
2-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
CHAPTER 3 SOFTWARE UTILITIES  
3-1  
3-2  
3-3  
3-4  
3-5  
3-6  
3-7  
3-8  
Introduction …………..........................................…....... 3-2  
VGA Driver Utility ……………………………….…… 3-3  
Flash BIOS Update ..............................................…....... 3-4  
LAN Driver Utility …...........................................…...... 3-6  
Sound Driver Utility …………………………………… 3-7  
Intel Chipset Software Installation Utility …..……..….. 3-8  
USB2.0 Software Installation Utility ………………….. 3-9  
Watchdog Timer Configuration ……………………….. 3-10  
CHAPTER 4 AWARD BIOS SETUP  
4-1  
4-2  
4-3  
4-4  
4-5  
4-6  
4-7  
4-8  
4-9  
Introduction ...................................................................  
Entering Setup ...............................................................  
The Standard CMOS Features ………............................ 4-4  
The Advanced BIOS Features .......................................  
Advanced Chipset Features ...........................................  
Integrated Peripherals …...............................................  
Power Management Setup ............................................. 4-19  
PNP/PCI Configuration …............................................. 4-21  
PC Health Status …….................................................... 4-23  
4-2  
4-3  
4-8  
4-12  
4-14  
4-10 Frequency Control ....................................…………...... 4-24  
4-11 Load Fail-Safe Defaults ................................................. 4-25  
4-12 Load Optimized Defaults .........................................….  
4-25  
4-13 Password Setting ……………………………………… 4-26  
4-14 Save & Exit Setup .........................................................  
4-15 Exit Without Saving …………………………………  
4-27  
4-28  
APPENDIX A EXPANSION BUS  
PCI Bus Pin Assignment ..............................................…......... A-2  
APPENDIX B TECHNICAL SUMMARY  
Block Diagram ........................................................................... B-2  
Interrupt Map ............................................................................ B-3  
RTC & CMOS RAM Map ........................................................ B-4  
Timer & DMA Channels Map .................................................. B-5  
I/O & Memory Map ...............................................…................ B-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
1
INTRODUCTION  
This chapter gives you the information for PMB-601LF. It also  
outlines the System specifications.  
Section includes:  
z About This Manual  
z System Specifications  
z Safety Precautions  
Experienced users can skip to chapter 2 on page 2-1  
for a Quick Start.  
Page:1-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
1-1. ABOUT THIS MANUAL  
Thank you for purchasing our PMB-601LF Intel® Core 2 Duo ATX  
Motherboard enhanced with VGA/Sound/2LAN, which is fully PC / AT  
compatible. The PMB-601LF provides faster processing speed, greater  
expandability and can handle more tasks than before. This manual is  
designed to assist you how to install and set up the system. It contains four  
chapters. The user can apply this manual for configuration according to the  
following chapters:  
Chapter 1 Introduction  
This chapter introduces you to the background of this manual, and the  
specifications for this system. The final page of this chapter will indicate  
how to avoid damaging this board.  
Chapter 2 Hardware Configuration  
This chapter outlines the component locations and their functions. In the  
end of this chapter, you will learn how to set jumper and how to configure  
this card to meet your own needs.  
Chapter 3 Software Utilities  
This chapter contains helpful information for proper installations of the  
VGA utility, LAN utility, Sound utility, and Flash BIOS Update. It also  
describes the Watchdog-timer configuration.  
Chapter 4 Award BIOS Setup  
This chapter indicates you how to set up the BIOS configurations.  
Appendix A Expansion Bus  
This Appendix introduces you the expansion bus for 1 x PCI-E16 BUS, 1  
x PCI-E4 BUS, 4 x PCI Bus and 1 x ISA BUS.  
Appendix B Technical Summary  
This section gives you the information about the Technical maps.  
Page: 1-2  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
1-2. SYSTEM SPECIFICATIONS  
z CPU (mPGA775):  
Intel® Celeron®-D, Pentium® 4, Pentium®-D, Core 2 Duo processor in  
mPGA775 Socket.  
2.8~3.8 GHz clock generator for Pentium 4  
1.86~2.66GHz clock generator for Core 2 Duo  
Front Side Bus 533/667/800/1066 MHZ.  
Auto detect voltage regulator.  
z CHIPSET :  
Intel Q965 + ICH8DO+FWH  
z MEMORY :  
Supports up to 8GB DDR SDRAM.  
Four 240-pin DDR2 DIMM sockets on board.  
z CACHE :  
Built-in CPU.  
z REAL-TIME CLOCK :  
Build in South Bridge.  
z BIOS :  
Phoenix-AwardBIOS™ for plug & play function.  
8Mb with VGA BIOS.  
Easy update 1MB flash EEPROM.  
Support S/IO Setup.  
z KEYBOARD CONNECTOR :  
Mini DIN connector.  
Supports for AT/PS2 keyboard.  
z MOUSE CONNECTOR :  
Mini DIN connector.  
Supports for PS/2 Mouse.  
z BUS SUPPORT :  
1 PCI-E16 Slot, support Graphic Card  
1 PCI-E4 Slots, support I/O card  
4 PCI Slots  
Page: 1-3  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
1 ISA Slot  
z DISPLAY :  
Built-in Intel Q965, support for CRT.  
Onboard 15-pin VGA D-SUB connector, support for resolution on SVGA  
Monitor.  
z SATA INTERFACE :  
6 SATA ports, support RAID 0,1,5,10.  
z SERIAL PORT :  
Four serial connectors.  
COM1/3/4 for RS-232, COM2 for RS-232/422/485.  
COM3/4 can output +5V or +12V, and use jumper settings.  
z FLOPPY DISK DRIVER INTERFACE :  
Support up to two Floppy Disk Drives, 3.5" and 5.25" (360K / 720K / 1.2M /  
1.44M / 2.88M).  
z USB CONNECTOR :  
Support up to ten USB 2.0 ports.  
4 ports with LAN1/ LAN2 on rear panel.  
6 ports with external 2.54 connector 2x5-pin headpin.  
z LAN ADAPTER :  
Dual ports, Intel® 82573V x 2, 10/100/1000 BaseT Ethernet.  
LAN1: 10/100/1000 BaseT Ethernet  
LAN2: 10/100/1000 BaseT Ethernet  
Support wake-on-LAN function.  
z SOUND :  
Realtek ALC262A (HD Codec), including SPDIF.  
Fully Compliant HD Analog I/O Component  
16-Bit Stereo Full-Duplex Codec  
Four Analog Line-level Stereo Inputs for Connection.  
High Quality CD Input with Ground Sense  
Stereo Line-Level Output  
Interface: Line-In, Line-Out, Microphone, and CD Audio-In.  
Page: 1-4  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
z HARDWARE MONITORING FUNCTION :  
Monitor Voltage, CPU temperature, & Cooling fan.  
If CPU Temperature is over setting, the buzzer will send out a warming (only  
under DOS system).  
z IRDA PORT :  
5-pin Infrared port, support IrDA v1.0 SIR protocol  
z PARALLEL PORT :  
SPP / ECP / EPP Function.  
1 port, bi-directional parallel port.  
z GREEN FUNCTION :  
Controlled by hardware and software.  
z LED INDICATOR :  
System power  
Hard Disk access (SATA)  
z DMA CONTROLLER :  
82C37 x 2  
z DMA CHANNELS :  
7
z INTERRUPT CONTROLLERS :  
82C59 x 2  
z INTERRUPT LEVELS :  
15  
z OPERATING TEMPERATURE :  
0 to 60°C.  
z BOARD DIMENSIONS :  
305mm x 344mm, 12” x9.61”  
z BOARD NET WEIGHT :  
810 gram.  
Page: 1-5  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
1-3. SAFETY PRECAUTIONS  
Follow the messages below to avoid your systems from damage:  
1. Keep your system away from static electricity on all occasions.  
2. Prevent electric shock. Don‘t touch any components of this card when the  
card is power-on. Always disconnect power when the system is not in use.  
3. Disconnect power when you change any hardware devices. For instance,  
when you connect a jumper or install any cards, a surge of power may  
damage the electronic components or the whole system.  
Page: 1-6  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
HARDWARE  
CONFIGURATION  
2
** QUICK START **  
Helpful information describes the jumper & connector settings, and  
component locations.  
Section includes:  
z Jumper & Connector Quick Reference Table  
z Component Locations  
z Configuration and Jumper settings  
z Connector’s Pin Assignments  
Page 2-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE  
COM1, COM2  
COM3, COM4  
COM Port Connector ....................…..................………  
…………………………………..  
JP6  
JP7  
JP5  
KB_MS1  
JP8 (5, 7)  
JP8 (1, 3)  
JP8 (6, 8)  
JP8 (14, 16, 18, 20)  
JP8 (2, 4)  
JP8 (13, 15)  
JP8 (17, 19)  
JP4  
CPU_FAN1  
SYS_FAN1  
PWR_FAN1  
NB_FAN1  
VGA1  
SATA1, SATA2, SATA3, SATA4  
FDD1  
LPT1  
COM3 Port RI/Voltage Selection ……………………..  
COM4 Port RI/Voltage Selection ……………………  
RS232/422/485 (COM2) Selection .....................………  
Keyboard/Mouse Connector ..........….....………………  
Reset Connector .........................…....................……….  
Hard Disk Drive LED Connector .......................……….  
ATX Power Button ……………………………………..  
External Speaker Connector ....…........................………  
PLED Connector …………….…….…...............………  
KeyLock Connector ……………………………………  
External SMI Connector ……………..…………..…….  
Clear CMOS Data Selection ……………………………  
CPU Fan Connector ……………………………………  
System Fan Connector ………………………………….  
Power Fan Connector …………………………………..  
NB Fan Connector ……………………………………..  
VGA Connector ………………………………………..  
Serial ATA Connector ………………………………….  
Floppy Disk Drive Connector ……..........………....…...  
Printer Connector …….....................……………......…  
Universal Serial Bus Connector …….....................……  
IrDA Connector ………………………………………..  
USB&LAN Connector …....................................………  
ATX Power Connector …………………………………  
Sound Connector ………………………….……………  
CD Audio-In Connector ………………………………..  
Memory Installation ..................................…......………  
……………………………………  
USB1, USB2, USB3  
JP1  
USB_RJG1, USB_RJG2  
ATX_PWR1, ATX_PWR2  
JAUDIO1  
CD_IN1  
DIMM1, DIMM2, DIMM3,  
DIMM4  
Page: 2-2  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-2. COMPONENT LOCATIONS  
PMB-601LF Connector, Jumper and Component locations  
Page: 2-3  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-3. HOW TO SET THE JUMPERS  
You can configure your board by setting jumpers. Jumper is consists of  
two or three metal pins with a plastic base mounted on the card, and by  
using a small plastic "cap", Also known as the jumper cap (with a metal  
contact inside), you are able to connect the pins. So you can set-up your  
hardware configuration by "open" or "close" pins.  
The jumper can be combined into sets that called jumper blocks. When  
the jumpers are all in the block, you have to put them together to set up  
the hardware configuration. The figure below shows how this looks like.  
JUMPERS AND CAPS  
If a jumper has three pins (for examples, labelled PIN1, PIN2, and PIN3),  
You can connect PIN1 & PIN2 to create one setting by shorting. You can  
either connect PIN2 & PIN3 to create another setting. The same jumper  
diagrams are applied all through this manual. The figure below shows  
what the manual diagrams look and what they represent.  
Page: 2-4  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
JUMPER DIAGRAMS  
Jumper Cap  
looks like this  
2 pin Jumper  
looks like this  
3 pin Jumper  
looks like this  
Jumper Block  
looks like this  
JUMPER SETTINGS  
2 pin Jumper close(enabled)  
Looks like this  
1
1
3 pin Jumper  
2-3 pin close(enabled)  
Looks like this  
1
1
Jumper Block  
1-2 pin close(enabled)  
Looks like this  
1
2
1
2
Page: 2-5  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-4. COM PORT CONNECTOR  
COM1 : COM1 Connector  
COM1 is fixed as RS-232.  
The pin assignment is as follows :  
PIN  
1
2
ASSIGNMENT  
COM1_DCD#  
COM1_RX  
3
COM1_TX  
4
5
COM1_DTR#  
GND  
6
7
8
9
COM1_DSR#  
COM1_RTS#  
COM1_CTS#  
COM1_RI#  
COM2 : COM2 Connector  
The COM2 is selectable as RS-232/422/485.  
The pin assignment is as follows :  
ASSIGNMENT  
PIN  
RS-232  
RS-422  
TX-  
RS-485  
TX-  
TX+  
RX+  
RX-  
GND  
GND  
GND  
GND  
GND  
1
2
3
4
5
6
7
8
9
COM2_DCD#  
COM2_RX  
COM2_TX  
COM2_DTR#  
GND  
COM2_DSR#  
COM2_RTS#  
COM2_CTS#  
COM2_RI#  
TX+  
RX+  
RX-  
GND  
RTS-  
RTS+  
CTS+  
CTS-  
Page: 2-6  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
COM3 : COM3 Connector  
COM3 is fixed as RS-232.  
The pin assignment is as follows :  
PIN  
1
2
ASSIGNMENT  
COM3_DCD#  
COM3_RX  
3
COM3_TX  
4
5
COM3_DTR#  
GND  
6
7
8
9
COM3_DSR#  
COM3_RTS#  
COM3_CTS#  
COM3_RI#  
COM4 : COM4 Connector  
COM4 is fixed as RS-232.  
The pin assignment is as follows :  
PIN  
1
2
ASSIGNMENT  
COM4_DCD#  
COM4_RX  
3
COM4_TX  
4
5
COM4_DTR#  
GND  
6
7
8
9
COM4_DSR#  
COM4_RTS#  
COM4_CTS#  
COM4_RI#  
Page: 2-7  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-5. COM3 RI & VOLTAGE SELECTION  
JP6 : COM3 RI & Voltage Selection  
The selections are as follows:  
JUMPER  
SELECTION  
SETTINGS  
JUMPER  
ILLUSTRATION  
5V  
5-6  
12V  
3-4  
RI  
1-2  
***Manufacturing Default -- RI.  
Page: 2-8  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-6. COM4 RI & VOLTAGE SELECTION  
JP7 : COM4 RI & Voltage Selection  
The selections are as follows:  
JUMPER  
SELECTION  
SETTINGS  
JUMPER  
ILLUSTRATION  
5V  
12V  
RI  
5-6  
3-4  
1-2  
***Manufacturing Default -- RI.  
Page: 2-9  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-7. RS232/422/485 (COM2) SELECTION  
JP5 : RS-232/422/485 (COM2) Selection  
This connector is used to set the COM2 function.  
The jumper settings are as follows :  
COM 2  
Function  
Jumper Settings  
(pin closed)  
Jumper  
Illustrations  
RS-232  
All Open  
RS-422  
1-2, 3-4, 9-10  
RS-485  
1-2, 5-6, 7-8  
*** Manufacturing default -- RS-232.  
Page: 2-10  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-8. KEYBOARD AND PS/2 MOUSE CONNECTOR  
KB_MS1 : Keyboard and PS/2 Mouse Connector  
The pin assignments are as follows :  
PIN  
1
ASSIGNMENT  
KBDATA  
2
NC  
3
4
5
6
GND  
VCC5  
KBCLK  
NC  
7
8
MSDATA  
NC  
9
GND  
VCC5  
MSCLK  
NC  
10  
11  
12  
2-9. RESET CONNECTOR  
JP8 (5, 7) : Reset Connector.  
The pin assignment is as follows :  
PIN  
5
ASSIGNMENT  
GND  
7
RST_BTN  
Page: 2-11  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-10. HARD DISK DRIVE LED CONNECTOR  
JP8 (1, 3) : Hard Disk Drive LED Connector  
The pin assignment is as follows :  
PIN  
1
ASSIGNMENT  
HD_LED+  
3
HD_LED-  
2-11. ATX POWER BUTTON  
JP8 (6, 8) : ATX Power Button  
The pin assignment is as follows :  
PIN  
6
8
ASSIGNMENT  
PWRBTNSW  
GND  
2-12. EXTERNAL SPEAKER CONNECTOR  
JP8 (14, 16, 18, 20) : External Speaker Connector  
The pin assignment is as follows :  
PIN  
14  
ASSIGNMENT  
SPK_VCC  
16  
18  
20  
SPEAKER SIGNAL  
SPEAKER SIGNAL  
SPEAKER SIGNAL  
Page: 2-12  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-13. PLED CONNECTOR  
JP8 (2, 4) : PLED Connector  
The pin assignment is as follows:  
PIN  
2
ASSIGNMENT  
PW_LED+  
4
PW_LED-  
2-14. KEYLOCK CONNECTOR  
JP8 (13, 15) : Keylock Connector  
The pin assignment is as follows:  
PIN  
13  
15  
ASSIGNMENT  
KEYLOCK  
GND  
2-15. EXTERNAL SMI CONNECTOR  
JP8 (17,19) : External SMI Connector  
The pin assignment is as follows:  
PIN  
17  
19  
ASSIGNMENT  
SLP_BTN  
GND  
Page: 2-13  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-16. CLEAR CMOS DATA SELECTION  
JP4 : Clear CMOS Data Selection  
The selections are as follows :  
JUMPER SETTING  
FUNCTION  
JUMPER  
ILLUSTRATION  
(pin closed)  
Normal  
1-2  
2-3  
Clear CMOS  
*** Manufacturing Default -- Normal.  
Note: To clear CMOS data, user must power-off the computer and set the jumper  
to “Clear CMOS” as illustrated above. After five to six seconds, set the  
jumper back to “Normal” and power-on the computer.  
2-17. CPU FAN CONNECTOR  
CPU_FAN1 : CPU Fan connector  
The pin assignment is as follows:  
PIN  
ASSIGNMENT  
GND  
VCC12  
LPC1_FANIO1  
LPC1_FANPWM1  
1
2
3
4
Page: 2-14  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-18. SYSTEM FAN CONNECTOR  
SYS_FAN1 : System Fan connector  
The pin assignment is as follows:  
PIN  
ASSIGNMENT  
GND  
VCC12  
1
2
3
LPC1_FANIO2  
2-19. POWER FAN CONNECTOR  
PWR_FAN1 : Power Fan connector  
The pin assignment is as follows:  
PIN  
ASSIGNMENT  
GND  
VCC12  
1
2
3
LPC1_FANIO3  
2-20. NB FAN CONNECTOR  
NB_FAN1 : North Bridge Fan connector  
The pin assignment is as follows:  
PIN  
1
ASSIGNMENT  
GND  
2
VCC12  
Page: 2-15  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-21. VGA CONNECTOR  
VGA1: VGA Connector  
PIN  
1
ASSIGNMENT  
RED  
2
3
4
GREEN  
BLUE  
NC  
5
GND  
6
GND  
7
GND  
8
GND  
9
VCC  
10  
11  
12  
13  
14  
15  
GND  
NC  
DATA  
HSYNC  
VSYNC  
CLK  
Page: 2-16  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-22. SERIAL ATA CONNECTOR  
SATA1~SATA4: The PMB-601LF possesses four Serial ATA  
Connector, SATA1~SATA4. The pin assignments are as follows:  
SATA1:  
PIN  
1
ASSIGNMENT  
GND  
2
3
4
SATA_TXPC4  
SATA_TXNC4  
GND  
5
6
7
SATA_RXNC4  
SATA_RXPC4  
GND  
SATA2:  
PIN  
1
ASSIGNMENT  
GND  
2
3
4
SATA_TXPC5  
SATA_TXNC5  
GND  
5
6
7
SATA_RXNC5  
SATA_RXPC5  
GND  
Page: 2-17  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
SATA3:  
PIN  
1
ASSIGNMENT  
GND  
2
3
4
SATA_TXPC0  
SATA_TXNC0  
GND  
5
6
7
SATA_RXNC0  
SATA_RXPC0  
GND  
8
GND  
9
SATA_TXPC1  
SATA_TXNC1  
GND  
SATA_RXNC1  
SATA_RXPC1  
GND  
10  
11  
12  
13  
14  
SATA4:  
PIN  
1
ASSIGNMENT  
GND  
2
3
4
SATA_TXPC2  
SATA_TXNC2  
GND  
5
6
7
SATA_RXNC2  
SATA_RXPC2  
GND  
8
GND  
9
SATA_TXPC3  
SATA-TXNC3  
GND  
SATA_RXNC3  
SATA_RXPC3  
GND  
10  
11  
12  
13  
14  
Page: 2-18  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-23. FLOPPY DISK DRIVE CONNECTOR  
FDD1 : Floppy Disk Drive Connector  
You can use a 34-pin daisy-chain cable to connect two-FDDs. On one  
end of this cable is a 34-pin flat cable to attach the FDD on the board,  
and the other side is attaches two FDDs.  
The pin assignments are as follows :  
PIN  
1
3
ASSIGNMENT  
GND  
PIN  
2
4
ASSIGNMENT  
F_DENSEL#  
NC  
GND  
5
GND  
6
NC  
7
9
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
8
F_INDEX#  
F_MTRA#  
F_DRVB#  
F_DRVA#  
F_MTRB#  
F_DIR#  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
F_STEP#  
F_WDATA#  
F_WGATE#  
F_TRK0#  
F_WPT#  
F_RDATA#  
F_HDSEL#  
F_DSKCHG#  
Page: 2-19  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-24. PRINTER CONNECTOR  
LPT1: Printer Connector  
As to link the Printer to the card, you need a cable to connect both  
DB25 connector and parallel port.  
The pin assignments are as follows :  
PIN  
1
2
3
4
5
6
7
8
ASSIGNMENT  
STB  
PIN  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
ASSIGNMENT  
AFD#  
ERR#  
INIT#  
SLIN#  
GND  
GND  
GND  
GND  
GND  
PDR0  
PDR1  
PDR2  
PDR3  
PDR4  
PDR5  
PDR6  
PDR7  
ACK#  
BUSY  
PE  
9
10  
11  
12  
13  
GND  
GND  
GND  
NC  
SLCT  
Page: 2-20  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-25. UNIVERSAL SERIAL BUS CONNECTOR  
USB1: Universal Serial Bus Connector  
The pin assignments are as follows:  
PIN  
1
2
ASSIGNMENT  
USB4_VCC5  
USBN8  
USBP8  
3
4
GND  
5
NC  
6
7
8
USB4_VCC5  
USBN9  
USBP9  
9
GND  
10  
NC  
USB2: Universal Serial Bus Connector  
The pin assignments are as follows:  
PIN  
1
2
ASSIGNMENT  
USB3_VCC5  
USBN6  
USBP6  
3
4
GND  
5
NC  
6
7
8
USB3_VCC5  
USBN7  
USBP7  
9
GND  
10  
NC  
Page: 2-21  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
USB3: Universal Serial Bus Connector  
The pin assignments are as follows:  
PIN  
1
2
ASSIGNMENT  
USB2_VCC5  
USBN4  
USBP4  
3
4
GND  
5
NC  
6
7
8
USB2_VCC5  
USBN5  
USBP5  
9
GND  
10  
NC  
2-26. IRDA CONNECTOR  
JP1: IrDA (Infrared) Connector  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
VCC5  
2
NC  
3
IRRX  
4
GND  
5
IRTX  
Page: 2-22  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-27. USB&LAN CONNECTOR  
USB_RJG2: USB & LAN Connector  
The pin assignments are as follows:  
LAN:  
PIN  
ASSIGNMENT  
LAN1_TXDP  
LAN1_TXDN  
LAN1_RXDP  
LAN1_RXDN  
1
2
3
4
11  
12  
13  
14  
LAN1_LILED  
LAN1_ACTLED  
LAN1_SPD100  
LAN1_LEDVCC  
USB:  
PIN  
A1  
A2  
A3  
A4  
B1  
B2  
B3  
B4  
ASSIGNMENT  
USB0_VCC5  
USBN0  
USBP0  
GND  
USB0_VCC5  
USBN1  
USBP1  
GND  
Page: 2-23  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
USB_RJG1: USB & LAN Connector  
The pin assignments are as follows:  
LAN:  
PIN  
1
2
3
4
5
6
7
8
ASSIGNMENT  
LAN2_1MDI_P0  
LAN2_1MDI_N0  
LAN2_1MDI_P1  
LAN2_1MDI_N1  
LAN2_1MDI_P2  
LAN2_1MDI_N2  
LAN2_1MDI_P3  
LAN2_1MDI_N3  
11  
12  
13  
14  
LAN2_LILED  
LAN2_ACTLED  
LAN2_SPD100  
LAN2_SPD1000  
USB:  
PIN  
A1  
A2  
A3  
A4  
B1  
B2  
B3  
B4  
ASSIGNMENT  
USB1_VCC5  
USBN2  
USBP2  
GND  
USB1_VCC5  
USBN3  
USBP3  
GND  
Page: 2-24  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-28. ATX POWER CONNECTOR  
ATX_PW1 : ATX 12V Connector  
The pin assignments are as follows:  
PIN  
ASSIGNMENT  
GND  
GND  
+12V  
+12V  
1
2
3
4
ATX_PW2 : ATX Power Connector  
The pin assignments are as follows:  
PIN ASSIGNMENT  
PIN ASSIGNMENT  
1
2
3
4
5
6
7
8
9
+3.3V  
+3.3V  
GND  
+5V  
GND  
+5V  
GND  
POK  
5VSB  
+12V  
+12V  
+3.3V  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
+3.3V  
-12V  
GND  
PSON  
GND  
GND  
GND  
-5V  
+5V  
+5V  
+5V  
GND  
10  
11  
12  
Page: 2-25  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-29. SOUND CONNECTOR  
JAUDIO1 : Sound Connector, including Line-In, Line-Out & Mic.  
Also can support only MIC connector. The pin assignments are as  
follows :  
Line-In  
PIN ASSIGNMENT  
32  
33  
34  
35  
HD_LINE-L  
GND  
GND  
HD_LINE-R  
Line-Out  
PIN ASSIGNMENT  
22  
23  
24  
25  
HD_OUT-L  
NC  
NC  
HD_OUT-R  
Mic-In  
PIN ASSIGNMENT  
1
2
3
4
5
GND  
HD_MIC1  
HD_MIC_GND  
NC  
HD_MIC_VCC  
Page: 2-26  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-30. CD AUDIO-IN CONNECTOR  
CD_IN1 : CD Audio-In Connector  
The pin assignments are as follows:  
PIN  
ASSIGNMENT  
CD-L  
CD-REF  
CD-REF  
CD-R  
1
2
3
4
2-31. MEMORY INSTALLATION  
PMB-601LF CPU Card can support up to 4GB in four DIMM sockets.  
DRAM BANK CONFIGURATION  
DIMM 1  
128MB  
256MB  
512MB  
1GB  
DIMM 2 DIMM3 DIMM4 TOTAL MEMORY  
128MB  
256MB  
512MB  
1GB  
128MB  
256MB  
512MB  
1GB  
128MB  
256MB  
512MB  
1GB  
512MB  
1GB  
2GB  
4GB  
2GB  
2GB  
2GB  
2GB  
8GB  
Page: 2-27  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
SOFTWARE  
UTILITIES  
3
This chapter comprises the detailed information of VGA driver, LAN  
driver, Sound driver, and flash BIOS update. It also describes on how to  
configuration the watchdog timer.  
Section includes:  
z Introduction.  
z VGA Driver Utility  
z Flash BIOS Update  
z LAN Driver Utility  
z Sound Driver Utility  
z Intel® Chipset Software Installation Utility  
z USB2.0 Chipset Software Installation Utility  
z Watchdog Timer Configuration  
Page: 3-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-1. INTRODUCTION  
Enclosed with our PMB-601LF package is our driver utility, which may  
comes in a form of a CD ROM disc or floppy diskettes. For CD ROM disc  
user, you will only need some of the files contained in the CD ROM disc,  
please kindly refer to the following chart:  
Filename  
(Assume that CD ROM drive is D:)  
D:\Driver\VGA  
Purpose  
Intel Q965  
For VGA driver installation  
For BIOS update utility  
For LAN Driver installation  
Realtek ALC262A Audio HD  
For Sound driver installation  
Intel® Chipset Software  
Installation Utility  
For Win 2000, XP,2003  
Intel® ICH8-R RAID Software  
Installation Utility For Win 2000,  
XP,2003  
D:\Driver\FLASH  
D:\Driver\LAN  
D:\Driver\Sound  
D:\Driver\UTILITY  
D:\Driver\RAID  
D:\Driver\USB 2.0  
D:\Driver\F6flpy32  
USB 2.0 Software Installation  
Utility  
For Win 2000, XP  
Intel® ICH8-R driver used for  
FLOPPY when Install Win2000,  
XP,2003  
ꢀ User should remember to install the Utility right after the OS fully installed.  
Page:3-2  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-2. VGA DRIVER UTILITY  
The VGA interface embedded with our PMB-601LF can support a wide  
range of display. You can display CRT, PCI-E (SDVO) simultaneously  
with the same mode.  
3-2-1. Installation of VGA Driver:  
To install the VGA Driver, simply follow the following steps:  
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD  
ROM drive.  
2. Under Windows 2000/XP/2003 system, go to the directory where  
VGA driver is located.  
3. Click Setup.exe file for VGA driver installation.  
4. Follow the instructions on the screen to complete the installation.  
5. Once installation is completed, shut down the system and restart in  
order for the changes to take effect.  
Page:3-3  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-3. FLASH BIOS UPDATE  
3-3-1. System BIOS Update:  
Users of PMB-601LF can use the program “Awdflash.exe” contained in CD  
ROM for BIOS update. This is found in D:\flash\Awdflash.exe.  
3-3-2. To update BIOS :  
(1) Install “Awdflash.exe” from the CD ROM Disk into your system.  
(2) Insert the new BIOS file you have obtained from Protech.  
(3) Type the pathname to Awdflash.exe and execute the BIOS update with  
file B601xxxx.bin  
C:\UTIL\AWDFLASH\AWARDFLASH  
(4) The screen will display the table below:  
B601xxxx.bin  
AwardBIOS Flash Utility V8.69  
( C )Phoenix Technologies Ltd. All Rights Reserved  
For Broadwater-6A79LP69C-00  
DATE : 01/16/2007  
Flash Type SST 49LF008A /3.3V  
-
File Name to Program : B601xxxx.bin  
Message : Do You Want To Save BIOS (Y/N)  
Page:3-4  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
If you want to save up the original BIOS, enter “Y ”and press <  
Enter > . If you choose “N”, the following table will appear on  
screen.  
AwardBIOS Flash Utility V8.69  
( C )Phoenix Technologies Ltd. All Rights Reserved  
For Broadwater-6A79LP69C-00  
DATE : 01/16/2007  
Flash Type SST 49LF008A /3.3V  
-
File Name to Program : B601xxxx.bin  
Message : Press ‘Y’ to Program or ‘N’ to Exit  
Select “Y”, and the BIOS will be renewed. When you are refreshing your BIOS, do not turn off or  
reset the system, or you will damage the BIOS. After you have completed all the programming, you  
will see the line: “Reset System or power off to accomplish update process!”. Please turn off or reset  
the system. Then the Flash BIOS is fully implemented.  
Page:3-5  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-4. LAN DRIVER UTILITY  
3-4-1. Introduction  
PMB-601LF is enhanced with LAN function that can support various  
network adapters. Installation programs for LAN drivers are listed as  
follows:  
For more details on Installation procedure, please refer to Readme.txt  
file found on LAN DRIVER UTILITY.  
Page:3-6  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-5. SOUND DRIVER UTILITY  
3-5-1. Introduction  
The Realtek ALC262A sound function enhanced in this system is fully  
compatible with Windows 2000 and Windows XP. Below, you will find  
the content of the Sound driver :  
3-5-2. Installation Procedure for Windows 2000/XP/2003  
1. From the task bar, click on Start, and then Run.  
2. In the Run dialog box, type D:\Sound\path\setup, where  
“D:\Sound\pathname” refers to the full path to the source files.  
3. Click on the OK button or press the ENTER key.  
4. Click on the “Next” and OK prompts as they appear.  
5. Reboot the system to complete the driver installation.  
Page:3-7  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-6. INTEL® CHIPSET SOFTWARE INSTALLATION UTILITY  
3-6-1. Introduction  
The Intel® Chipset Software Installation Utility installs to the target  
system the Windows* INF files that outline to the operating system how  
the chipset components will be configured. This is needed for the  
proper functioning of the following features:  
-
-
-
-
-
Core PCI and ISAPNP Services  
AGP Support  
IDE/ATA33/ATA66/ATA100 Storage Support  
USB Support  
Identification of Intel® Chipset Components in Device Manager  
3-6-2. Installation of Utility for Windows 2000/XP/2003  
The Utility Pack is to be installed only for Windows 2000 and XP  
program.  
It should be installed right after the OS installation, kindly follow the  
following steps:  
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD  
ROM drive.  
2. Under Windows 2000/XP/2003 system, go to the directory where  
Utility Disc is located.  
3. Click Setup.exe file for utility installation.  
4. Follow the instructions on the screen to complete the installation.  
5. Once installation is completed, shut down the system and restart in  
order for the changes to take effect.  
Page:3-8  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-7. USB2.0 SOFTWARE INSTALLATION UTILITY  
3-7-1. Installation of Utility for Windows 2000/XP  
Intel USB 2.0 Enhanced Host Controller driver can only be used on  
Windows 2000 and Windows XP on Intel Desktop boards. It should be  
installed right after the OS installation, kindly follow the following steps:  
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD  
ROM drive.  
2. Under Windows 2000, and XP system, go to the directory where  
Utility Disc is located.  
3. Start the “System” wizard in control panel. (Click  
Start/Settings/Control Panel).  
4. Select “Hardware” and click “Device Manager ” button.  
5. Double Click “USB Root Hub”.  
6. Select “Driver”.  
7. Click “Install” to install the driver.  
8. Follow the instructions on the screen to complete the installation.  
9. Click “Finish” after the driver installation is complete.  
Page:3-9  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-8. WATCHDOG TIMER CONFIGURATION  
The I/O port address of the watchdog timer is 2E(hex) and 2F(hex). 2E (hex)  
is the address port. 2F(hex) is the data port. User must first assign the  
address of register by writing address value into address port 2E(hex), then  
write/read data to/from the assigned register through data port 2F (hex).  
Configuration Sequence  
There are three steps to completing the configuration setup:  
(1) Enter the MB PnP Mode.  
(2) Modify the data of configuration registers.  
(3) Exit the MB PnP Mode.  
Undesired result may occur if the MB PnP Mode is not exited normally.  
(1) Enter the MB PnP Mode  
To enter the MB PnP Mode, four special I/O write operations are to be  
performed.  
(2) Modify the data of configuration registers  
All configuration registers can be accessed after entering the MB PnP Mode.  
Before accessing a selected register, the content of index 07h must be  
changed to the LDN to which the register belongs, except some Global  
registers.  
(3) Exit the MB PnP Mode  
Set bit 1 of the configure control register (index=02h) to “1” to exit the MB  
PnP Mode.  
Sample code:  
;***********************************************;  
;Enter PnP Mode  
;***********************************************;  
MOVDX,2Eh  
MOVAL,87h  
OUTDX,AL  
MOVAL,01h  
OUTDX,AL  
MOVAL,55h  
OUTDX,AL  
MOVAL,55h  
OUTDX,AL  
;***********************************************;  
;Select LDN to 07h  
;***********************************************;  
MOVDX,2Eh  
Page:3-10  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
MOVAL,07h  
OUTDX,AL  
MOVDX,2Fh  
MOVAL,07h  
OUTDX,AL  
;***********************************************;  
;Select Time resolution by index 72h  
;AL=C0h Second resolution  
;AL=80h Minute resolution  
;***********************************************;  
MOVDX,2Eh  
MOVAL,72h  
OUTDX,AL  
MOVDX,2Fh  
MOVAL,0C0h  
OUTDX,AL  
;***********************************************;  
;Write non-zero value into index 73h  
;for Enable WDT and Start count down.  
;***********************************************;  
MOVDX,2Eh  
MOVAL,73h  
OUTDX,AL  
MOVDX,2Fh  
MOVAL,02h  
OUTDX,AL  
;***********************************************;  
;Write zero value into register AL  
;for Disable WDT.  
;***********************************************;  
MOVDX,2Eh  
MOVAL,73h  
OUTDX,AL  
MOVDX,2Fh  
MOVAL,00h  
OUTDX,AL  
;***********************************************;  
;Exit PnP Mode  
;***********************************************;  
MOVDX,2Eh  
MOVAL,02h  
OUTDX,AL  
MOVDX,2Fh  
MOVAL,02h  
OUTDX,AL  
Page:3-11  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
AWARD  
BIOS SETUP  
4
This chapter shows how to set up the Award BIOS.  
Section includes:  
z Introduction  
z Entering Setup  
z The Standard CMOS Features  
z The Advanced BIOS Features  
z The Advanced Chipset Features  
z Integrated Peripherals  
z Power Management Setup  
z PNP/PCI Configuration  
z PC Health Status  
z Frequency Control  
z Load Fail-Safe Defaults  
z Load Optimized Defaults  
z Password Setting  
z Save and Exit Setup  
z Exit Without Saving  
Page: 4-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-1. INTRODUCTION  
This chapter will show you the function of the BIOS in managing the  
features of your system. The PMB-601LF Intel Core 2 Duo ATX  
Motherboard is equipped with the BIOS for system chipset from Phoenix -  
Award Software Inc. This page briefly explains the function of the BIOS in  
managing the special features of your system. The following pages describe  
how to use the BIOS for system chipset Setup menu.  
Your application programs (such as word processing, spreadsheets, and  
games) rely on an operating system such as DOS or OS/2 to manage such  
things as keyboard, monitor, disk drives, and memory.  
The operating system relies on the BIOS (Basic Input and Output system), a  
program stored on a ROM (Read-only Memory) chip, to initialize and  
configure your computer's hardware. As the interface between the hardware  
and the operating system, the BIOS enables you to make basic changes to  
your system's hardware without having to write a new operating system.  
The following diagram illustrates the interlocking relationships between the  
system hardware, BIOS, operating system, and application program:  
Page: 4-2  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-2. ENTERING SETUP  
When the system is powered on, the BIOS will enter the Power-On Self  
Test (POST) routines and the following message will appear on the lower  
screen:  
PRESS <DEL> TO ENTER SETUP, ESC TO SKIP MEMORY TEST  
As long as this message is present on the screen you may press the <Del>  
key (the one that shares the decimal point at the bottom of the number  
keypad) to access the Setup program. In a moment, the main menu of the  
Award SETUP program will appear on the screen:  
Phoenix - AwardBIOS CMOS Setup Utility  
►Standard CMOS Features  
►Advanced BIOS Features  
►Advanced Chipset Features  
►Integrated Peripherals  
►Power Management Setup  
►PnP/PCI Configurations  
►PC Health Status  
►Frequency Control  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Save & Exit Setup  
Exit Without Saving  
↑↓→← : Select Item  
Esc : Quit  
F10 : Save & Exit Setup  
Time, Date, Hard Disk Type .…  
Setup program initial screen  
You may use the cursor the up/down keys to highlight the individual menu  
items. As you highlight each item, a brief description of the highlighted  
selection will appear at the bottom of the screen.  
Page: 4-3  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-3. THE STANDARD CMOS FEATURES  
Highlight the〝STANDARD CMOS FEATURES〞and press the <ENTER>  
key and the screen will display the following table:  
Phoenix - AwardBIOS CMOS Setup Utility  
Standard CMOS Features  
Date (mm:dd:yy)  
Time (hh:mm:ss)  
Thu, Jun 22 2007  
13 54 : 47  
Item Help  
:
Menu Level  
►
▶ SATA Channel 1  
▶ SATA Channel 2  
▶ SATA Channel 3  
▶ SATA Channel 4  
▶ SATA Channel 5  
▶ SATA Channel 6  
[ HDS728080PLA380]  
[ None]  
[ None]  
[ None]  
[ None]  
Change the day,  
month, year and  
century  
[ None]  
Drive A  
[1.44M, 3.5 in.]  
Video  
[EGA/VGA]  
Halt On  
[All, But Keyboard]  
Base Memory  
Extended Memory  
Total Memory  
640K  
514048K  
515072K  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
CMOS Setup screen  
In the above Setup Menu, use the arrow keys to highlight the item and then use  
the <PgUp> or <PgDn> keys to select the value you want in each item.  
DATE:  
< Month >, < Date > and <Year >. Ranges for each value are in the CMOS  
Setup Screen, and the week-day will skip automatically.  
TIME:  
< Hour >, < Minute >, and < Second >. Use 24 hour clock format, i.e., for PM  
numbers, add 12 to the hour. For example: 4: 30 P.M. You should enter the  
time as 16:30:00.  
Page: 4-4  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
SATA CHANNEL 0/1/2/3/4/5:  
The BIOS can automatically detect the specifications and optimal operating  
mode of almost all SATA hard drives. When you select type AUTO for a  
hard drive, the BIOS detect its specifications during POST, every time system  
boots.  
If you do not want to select drive type AUTO, other methods of selecting  
drive type are available:  
1. Match the specifications of your installed SATA hard drive(s) with  
the preprogrammed values for hard drive types 1 through 45.  
2. Select USER and enter values into each drive parameter field.  
3. Use the SATA HDD AUTO DETECTION function in Setup.  
Here is a brief explanation of drive specifications:  
Type: The BIOS contains a table of pre-defined drive types. Each  
defined drive type has a specified number of cylinders, number of heads,  
write precompensation factor, landing zone, and number of sectors.  
Drives whose specifications do not accommodate any predefine type are  
classified as type USER.  
•
Size: Disk drive capacity (approximate). Note that this size is usually  
greater than the size of a formatted disk given by a disk-checking  
program.  
•
•
•
•
•
•
Cyls: number of cylinders.  
Head: number of heads.  
Precomp: write precompensation cylinders.  
Landz: landing zone.  
Sector: number of sectors.  
Mode: Auto, Normal, Large or LBA.  
Auto: The BIOS automatically determines the optimal mode.  
ƒ
ƒ
ƒ
Normal: Maximum number of cylinders, heads, sectors  
supported are 1024, 16 and 63.  
Large: For drives that do not support LBA and have more  
than 1024 cylinders.  
LBA (Logical Block Addressing): During drive accesses, the  
Page: 4-5  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
SATA controller transforms the data address described by  
sector, head and cylinder number into a physical block  
address, significantly improving data transfer rates. For  
drives greater than 1024 cylinders.  
DRIVE A:  
Select the type of floppy disk drive installed in your system. The available  
options are 360KB 5.25in, 1.2KB 5.25in, 720KB 3.5in, 1.44MB 3.5in,  
2.88MB 3.5in and None.  
VIDEO:  
This category selects the type of video adapter used for the primary system  
monitor. Although secondary monitors are supported, you do not have to  
select the type in Setup. Available Options are as follows:  
EGA/VGA  
Enhanced Graphics Adapter/Video Graphics Array.  
For EGA, VGA, SEGA, SVGA or PGA monitor  
adapters.  
CGA 40  
CGA 80  
MONO  
Color Graphics Adapter, power up in 40 column mode.  
Color Graphics Adapter, power up in 80 column mode.  
Monochrome adapter, includes high resolution  
monochrome adapters.  
HALT ON:  
This category allows user to choose whether the computer will stop if an error  
is detected during power up. Available options are “All errors”, “No errors”,  
“All, But keyboard”, “All, But Diskette”, and “All But Disk/Key”.  
BASE MEMORY:  
Displays the amount of conventional memory detected during boot up.  
EXTENDED MEMORY:  
Displays the amount of extended memory detected during boot up.  
TOTAL MEMORY:  
Displays the total memory available in the system.  
Page: 4-6  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
HARD DISK ATTRIBUTES:  
Type  
1
Cylinders  
306  
Heads  
4
V-P comp  
128  
LZone  
305  
615  
615  
940  
940  
615  
511  
733  
901  
820  
855  
855  
319  
733  
000  
663  
977  
977  
1023  
732  
732  
733  
336  
976  
1023  
1223  
1223  
1223  
1023  
1023  
1023  
926  
1023  
1023  
1023  
1023  
1023  
1023  
1023  
820  
Sect  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
00  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
26  
17  
26  
33  
Capacity  
10  
2
615  
4
300  
300  
512  
512  
65535  
256  
65535  
65535  
65535  
65535  
65535  
128  
65535  
0000  
0000  
300  
65535  
512  
300  
300  
20  
30  
62  
46  
20  
30  
30  
112  
20  
35  
49  
20  
42  
00  
20  
40  
56  
59  
30  
42  
30  
10  
40  
76  
71  
111  
152  
68  
93  
83  
3
615  
6
4
940  
8
5
940  
6
6
615  
4
7
642  
8
8
733  
5
9
900  
820  
15  
3
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
47  
855  
855  
306  
733  
000  
612  
977  
977  
1024  
733  
733  
733  
306  
5
7
8
7
0
4
5
7
7
5
7
5
4
5
9
7
11  
15  
8
11  
11  
9
10  
12  
13  
14  
2
16  
15  
6
300  
0000  
977  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65335  
AUTO  
1024  
1224  
1224  
1224  
1024  
1024  
918  
925  
69  
85  
1024  
1024  
1024  
1024  
1024  
1024  
918  
102  
110  
119  
17  
136  
114  
40  
42  
65  
40  
61  
820  
1024  
1024  
809  
809  
776  
5
5
6
6
1023  
1023  
852  
852  
775  
8
100  
Award Hard Disk Type Table  
Page: 4-7  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-4. THE ADVANCED BIOS FEATURES  
Choose the〝ADVANCED BIOS FEATURES〞in the main menu, the screen  
shown as below.  
Phoenix - AwardBIOS CMOS Setup Utility  
Advanced BIOS Features  
[Press Enter]  
[Press Enter]  
▶ CPU Feature  
Item Help  
▶ Hard Disk Boot Priority  
[Hard Disk]  
[Hard Disk]  
[LS120]  
[Enabled]  
[Enabled]  
[Disabled]  
6
First Boot Device  
Second Boot Device  
Third Boot Device  
Menu Level  
►
Boot Other Device  
Boot Up Floppy Seek  
Typematic Rate Setting  
x Typematic Rate (Chars/Sec)  
x Typematic Delay (Msec)  
Security Option  
250  
[Setup]  
[Enabled]  
[1.4]  
APIC Mode  
MPS Version Control For OS  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
BIOS Features Setup Screen  
The “BIOS FEATURES SETUP” allow you to configure your system for  
basic operation. The user can select the system’s boot-up sequence and  
security.  
A brief introduction of each setting is given below.  
Page: 4-8  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
CPU FEATURE:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
CPU Feature  
Limit CPUID MaxVal  
Execute Disable Bit  
Virtualization Technology  
[Disabled]  
[Enabled]  
[Enabled]  
Item Help  
Menu Level  
►
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. LIMIT CPUID MAXVAL  
The CPUID instruction of some CPUs will return a value greater than  
3.If you are using Windows operating system. Please disable this  
feature.  
2. EXECUTE DISABLE BIT  
To select enable or disable the No-Execution Page Protection  
Technology.  
3. VITRUALIZATION TECHNOLOGY  
To select enable or disable Virtualization Technology.  
Page: 4-9  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
HARD DISK BOOT PRIORITY:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
Hard Disk Boot Priority  
1. SATA 1.  
2. Bootable Add-in Cards  
:
HDS728080PLA380  
Item Help  
Menu Level  
►
Use<Ç> or <È> to select a  
device, then press <+> to move  
it up, or <-> to move it down  
the list. Press <ESC> to exit  
this menu.  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Select Hard Disk Boot Device Priority  
FIRST/SECOND/ THIRD/ OTHER BOOT DEVICE:  
The BIOS attempt to load the operating system from the devices in the  
sequence selected in these items.  
BOOT UP FLOPPY SEEK:  
You may enable / disable this item to define whether the system will look for  
a floppy disk drive to boot at power-on, or proceed directly to the hard disk  
drive.  
TYPEMATIC RATE SETTING:  
Enable this item if you wish to be able to configure the characteristics of  
your keyboard. Typematic refers to the way in which characters are entered  
repeatedly if a key is held down. For example, if you press and hold down  
the "A" key, the letter "a" will repeatedly appear on your screen on your  
screen until you release the key. When enabled, the typematic rate and  
typematic delay can be selected.  
Page: 4-10  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
TYPEMATIC RATE (CHARS/SEC):  
This item sets the number of times a second to repeat a key stroke when you  
hold the key down.  
TYPEMATIC DELAY (MSEC):  
The item sets the delay time after the key is held down before it begins to  
repeat the keystroke.  
SECURITY OPTION:  
This category allows you to limit access to the system and Setup, or just to  
Setup.  
System  
The system will not boot and access to Setup will be  
denied if the correct password is not entered at the  
prompt.  
Setup  
The system will boot, but access to Setup will be  
denied if the correct password is not entered at the  
prompt.  
ꢀ To disable security, select PASSWORD SETTING at Main Menu and  
then you will be asked to enter password. Do not type anything and just  
press <Enter>, it will disable security. Once the security is disabled, the  
system will boot and you can enter Setup freely.  
APIC MODE:  
To Enable Advanced Programmable Interrupt Controller  
MPS VERSION CONTROL FOR OS:  
This option is only valid for multiprocessor motherboards as it specifies the  
version of the Multiprocessor Specification (MPS) that the motherboard will  
use. The MPS is a specification by which PC manufacturers design and build  
Intel architecture systems with two or more processors.  
Page: 4-11  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-5. ADVANCED CHIPSET FEATURES  
Choose the〝ADVANCED CHIPSET FEATURES〞from the main menu,  
the screen shown as below.  
Phoenix - AwardBIOS CMOS Setup Utility  
Advanced Chipset Features  
DRAM Timing Selectable  
X CAS Latency Time  
[By SPD]  
Auto  
Item Help  
X DRAM RAS# to CAS# Delay  
X DRAM RAS# Precharge  
X Precharge dealy (tRAS)  
X System Memory Frequency  
Memory Hole At 15M-16M  
Auto  
Auto  
Auto  
By SPD  
[Disabled]  
Menu Level  
►
** VGA Setting **  
PEG/Onchip VGA Control  
On-Chip Frame Buffer Size  
DVMT Mode  
[Auto]  
[8MB]  
[DVMT]  
[128 MB]  
DVMT/ FIXED Memory Size  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
Chipset Features Setup Screen  
This parameter allows you to configure the system based on the specific  
features of the installed chipset. The chipset manages bus speed and  
access to system memory resources, such as DRAM and the external cache.  
It also coordinates communications between conventional ISA bus and the  
PCI bus. It must be stated that these items should never need to be altered.  
The default settings have been chosen because they provide the best opera-  
ting conditions for the system. The only time you might consider making  
any changes would be if you discovered that data was being lost while  
using your system.  
DRAM TIMEING SELECTABLE:  
The value in this field depends on performance parameters of the installed  
memory chips (DRAM). Do not change the value from the factory setting  
unless you install new memory that has a different performance rating than  
the original DRAMs.  
Page: 4-12  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
CAS LATENCY TIME:  
When synchronous DRAM is installed, the number of clock cycles of CAS  
latency depends on the DRAM timing.  
DRAM RAS# TO CAS# DELAY:  
This item let you insert a timing delay between the CAS and RAS strobe  
signals, used when DRAM is written to, read from, or refreshed. Fast  
gives faster performance; and Slow gives more stable performance. This  
field applies only when synchronous DRAM is installed in the system.  
The choices are 2 and 3.  
DRAM RAS# PRECHARGE TIME:  
If an insufficient number of cycles is allowed for the RAS to accumulate its  
charge before DRAM refresh, the refresh may be incomplete and the DRAM  
may fail to retain data. Fast gives faster performance; and Slow gives more  
stable performance. This field applies only when synchronous DRAM is  
installed in the system. The choices are 2 & 3.  
PRECHARGE DEALY (tRAS):  
Precharge Delay This setting controls the precharge delay, which  
determines the timing delay for DRAM precharge  
SYSTEM MEMORY FREQUENCY:  
Allow to choose different frequency of memory module.  
MEMORY HOLE AT 15-16M:  
You can reserve this area of system memory for ISA adapter ROM. When  
this area is reserved, it cannot be cached. The user information of  
peripherals that need to use this area of system memory usually discusses their  
memory requirements  
PEG/ONCHIP VGA CONTROL:  
To select the PCI-Express Graphics or onchip VGA Graphics.  
ON-CHIP FRAME BUFFER SIZE:  
The On-Chip Frame Buffer Size can be set as 32MB. This memory is shared  
with the system memory.  
DVMT MODE:  
Intel Dynamic Video Memory Technology Mode.  
Page: 4-13  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
DVMT/FIXED MEMORY SIZE:  
DVMT Memory Size Select.  
4-6. INTEGRATED PERIPHERALS  
Choose〝INTEGRATED PERIPHERALS〞from the main setup menu, a  
display will be shown on screen as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
Integrated Peripherals  
X OnChip IDE Device  
X SuperIO Device  
[Press Enter]  
[Press Enter]  
[3E8]  
[IRQ10]  
[2E8]  
Item Help  
Onboard Serial Port 3  
Serial Port 3 Use IRQ  
Onboard Serial Port 4  
Serial Port 3 Use IRQ  
X USB Device Setting  
Onboard Lan1 Controller  
Onboard Lan2 Controller  
Menu Level  
►
IRQ11]  
[Press Enter]  
[Enabled]  
[Enabled]  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
Integrated Peripherals Setup Screen  
By moving the cursor to the desired selection and by pressing the <F1> key,  
the all options for the desired selection will be displayed for choice.  
ꢀ
If bios setup menu item supports USB device boot, it will cause Win9x detects  
the same storages twice when the system is rebooted, and USB HDD will fail.  
Note: this cause just happen under Win9x, the phenomenon is a limitation.  
Page: 4-14  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
ONCHIP IDE DEVICE:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
OnChip IDE Device  
IDE HDD Block Mode  
[Enabled]  
[Enabled]  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
[IDE]  
Item Help  
IDE DMA transfer access  
IDE Primary Master PIO  
IDE Primary Slave PIO  
IDE Primary Master UDMA  
IDE Primary Slave UDMA  
IDE Secondary Master PIO  
IDE Secondary Slave PIO  
IDE Secondary Master UDMA  
IDE Secondary Slave UDMA  
SATA Mode  
Menu Level  
►
If your IDE hard drive  
supports block mode  
select Enabled for  
automatic detection of  
the optional number of  
block read/writes per  
sector the drive can  
support.  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. IDE HDD BLOCK MODE  
Block mode is also called block transfer, multiple commands, or  
multiple sector read/write. If your IDE hard drive supports block mode  
(most new drives do), select Enabled for automatic detection of the  
optimal number of block read/writes per sector the drive can support  
2. IDE DMA TRANSTER ACCESS  
To Enable/Disable the IDE DMA transfer access  
3. PRIMARY MASTER/SLAVE PIO  
SECONDARY MASTER/SLAVE PIO  
The four IDE PIO fields allow you to set a PIO mode (0-4) for each of  
the four IDE devices that the onboard IDE interface supports. Modes  
0 through 4 provide successively increased performance. In Auto  
mode, the system automatically determines the best mode for each  
device.  
Page: 4-15  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4. PRIMARY MASTER/SLAVE UDMA  
SECONDARY MASTER/SLAVE UDMA  
Ultra DMA/33 implementation is possible only if your IDE hard drive  
supports it and the operating environment includes a DMA driver  
(Windows 95 OSR2 or a third-party IDE bus master driver). If you  
hard drive and your system software both support Ultra DMA/33,  
select Auto to enable BIOS support.  
5. SATA MODE  
Set the Serial ATA configuration. When set in Advanced Host  
Controller Interface (AHCI) or RAID mode, the SATA controller is set  
to Native mode. Configuration options: [IDE] [RAID] [AHCI]  
SUPER IO DEVICE:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
SuperIO Device  
Onboard FDC Controller  
Onboard Serial Port 1  
Onboard Serial Port 2  
UART Mode Select  
X UR2 Duplex Mode  
Onboard Parallel Port  
Parallel Port Mode  
[Enabled]  
[3F8/IRQ4]  
[2F8/IRQ3]  
[Normal]  
[Half]  
Item Help  
Menu Level  
►
[378/IRQ7]  
[SPP]  
X ECP Mode Use DMA  
PWRON After PWR-Fail  
3
[Off]  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. ONBOARD FDC CONTROLLER  
Select Enabled if the system has a floppy disk controller (FDC) installed  
on the system board and you wish to use it. If you install and-in FDC or  
the system has no floppy drive, select Disabled.  
2. ONBOARD SERIAL PORT 1/2  
Select an address and corresponding interrupt for the first and second  
serial ports.  
3. UART MODE SELECT  
This item allows you to select UART mode.  
Page: 4-16  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4. UR2 DUPLEX MODE  
This item allows you to select the IR half/full duplex function.  
5. ONBOARD PARALLEL PORT  
This item allows you to determine access onboard parallel port  
controller with which I/O address.  
6. PARALLEL PORT MODE  
Select an operating mode for the onboard parallel (printer) port.  
Select Normal, Compatible, or SPP unless you are certain your  
hardware and software both support one of the other available modes.  
7. ECP MODE USE DMA  
Select a DMA channel for the parallel port for use during ECP mode.  
8. PWRON AFTER PWR-FAIL  
This item allows you to select if you want to power on the system after  
power failure. The choice:Off,On,Former-Sts.  
ONBOARD SERIAL PORT 3/4:  
SERIAL PORT 3/4 USE IRQ:  
Select an address and corresponding interrupt for third and forth serial port.  
USB DEVICE SETTING:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
Onboard Device  
USB 1.0 Controller  
USB 2.0 Controller  
USB Keyboard Function  
USB Mouse Function  
USB Storage Function  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
Item Help  
Menu Level  
►
*** USB Mass Storage Device Boot Setting ***  
USB Flash Disk 2.00 [Auto mode]  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
Page: 4-17  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
1. USB 1.0 CONTROLLER  
This should be enabled if your system has a USB installed on the  
system board and you want to use it. Even when so equipped, if you  
add a higher performance controller, you will need to disable this  
feature.  
2. USB 2.0 CONTROLLER  
Enable the USB 2.0 controller.  
3. USB KEYBOARD FUNCTION  
Select Enabled if your system contains a Universal Serial Bus (USB)  
controller and you have a USB keyboard.  
4. USB MOUSE FUNCTION  
Select Enabled if your system contains a Universal Serial Bus (USB)  
controller and you have a USB Mouse.  
5. USB STORAGE FUNCTION  
Enable the USB Storage Function  
6. USB FLASH DISK 2.00  
Select USB Flash Disk Type.  
ONBOARD LAN 1/2 CONTROLLER:  
Enable the LAN controller.  
Page: 4-18  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-7. POWER MANAGEMENT SETUP  
Choose〝POWER MANAGEMENT SETUP〞option on the main menu, a  
display will be shown on screen as below :  
Phoenix - AwardBIOS CMOS Setup Utility  
Power Management Setup  
ACPI Function  
Power Management  
Suspend Mode  
Soft-Off by PWR-BTTN  
Wake-Up by PCI card  
Resume by Alarm  
X Date (of Month) Alarm  
X Time (hh:mm:ss) Alarm  
[Enabled]  
[User Define]  
[Disabled]  
[Instant-Off]  
[Enabled]  
[Disabled]  
0
Item Help  
0
:
0:  
0
Menu Level  
►
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
Power Management Setup Screen  
The “Power Management Setup” allows the user to configure the system to  
the most effectively save energy while operating in a manner consistent with  
your own style of computer use.  
ACPI FUNCTION:  
Users are allowed to enable or disable the Advanced Configuration and  
Power Management (ACPI).  
Page: 4-19  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
POWER MANAGEMENT:  
This item allows the user to select the type or degree of power saving and is  
directly related to the following modes:  
a. HDD Power Down  
b. Suspend Mode  
SUSPEND MODE:  
When enabled and after the set time of system inactivity, all devices except  
the CPU will be shut off.  
SOFT-OFF BY PWR-BTTN:  
Pressing the power button for more than 4 seconds forces the system to  
enter the Soft-Off state when the system has “hung”. The choices are  
Delay 4 Sec and Instant-Off.  
WAKE-UP BY PCI CARD:  
An input signal on the serial Ring Indicator (RI) line (in other words, an  
incoming call on the modem) awakens the system from the soft-off state.  
RESUME BY ALARM:  
When enabled, you can set the date and time at which the RTC alarm  
awakens the system from Suspend mode.  
Page: 4-20  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-8. PNP/PCI CONFIGURATION  
Choose 〝PNP/PCI CONFIGURATION〞 from the main menu, a display  
will be shown on screen as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
PnP/PCI Configurations  
Init Display First  
Reset Configuration Data  
[PCI Slot]  
[Disabled]  
Item Help  
Menu Level  
►
Resources Controlled By  
x IRQ Resources  
[Auto (ESCD)]  
Press Enter  
PCI/VGA Palette Snoop  
[Disabled]  
[128]  
** PCI Express relative items **  
Maximum Payload Size  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
PNP/PCI Configuration Setup Screen  
The PNP/PCI Configuration Setup describes how to configure PCI bus system.  
PCI, also known as Personal Computer Interconnect, is a system, which  
allows I/O devices to operate at speeds nearing the speed of the CPU itself  
uses when communicating with its own special components.  
This section covers technical items, which is strongly recommended for  
experienced users only.  
INIT DISPLAY FIRST:  
This item allows you to decide to active whether PCI Slot or on-chip VGA  
first.  
RESET CONFIGURATION DATA:  
Normally, you leave this field Disabled. Select Enabled to reset Extended  
System Configuration Data (ESCD) when you exit Setup if you have  
installed a new add-on and the system configuration has caused such a  
serious conflict that the operating system cannot boot.  
Page: 4-21  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
RESOURCE CONTROLLED BY:  
The Award Plug and Play Bios can automatically configure all of the booth  
and Plug and Play-compatible devices. However, this capability means  
absolutely nothing unless you are using a Plug and Play operating system  
such as Windows 95. By choosing “manual”, you are allowed to  
configure the IRQ Resources and DMA Resources.  
IRQ RESOURCES:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
IRQ Resources  
IRQ-3 assigned to  
IRQ-4 assigned to  
IRQ-5 assigned to  
IRQ-7 assigned to  
IRQ-9 assigned to  
IRQ-10 assigned to  
IRQ-11 assigned to  
IRQ-12 assigned to  
IRQ-14 assigned to  
IRQ-15 assigned to  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
Item Help  
Menu Level  
►
Legacy ISA for devices  
compliant with the original PC  
AT bus specification, PCI/ISA  
PnP for devices compliant  
with the Plug and Play  
standard whether designed for  
PCI or ISA bus architecture  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. IRQ-n Assigned to:  
You may assign each system interrupt a type, depending on the type of  
device using the interrupt.  
PCI/VGA PALETTE SNOOP:  
Leave this field at disabled.  
MAXIMUM PAYLOAD SIZE:  
To select the maximum payload size of PCI Express devices.  
Page: 4-22  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-9. PC HEALTH STATUS  
Choose 〝PC HEALTH STATUS〞 from the main menu, a display will  
be shown on screen as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
PC Health Status  
Shutdown Temperature  
Vcore  
[Enabled]  
1.26V  
Item Help  
+1.8V  
+3.3V  
1.79V  
3.28V  
Menu Level  
►
+12V  
+5V  
12.03V  
4.91V  
System Temperature  
CPU Temperature  
CPU FAN  
System FAN  
Power FAN  
27 C  
33 C  
2556 RPM  
8035 RPM  
0 RPM  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
PC Health Status Setup Screen  
The PC Health Status Setup allows you to select whether to choose between  
monitoring or to ignore the hardware monitoring function of your system.  
SHUTDOWN TEMPERATURE:  
This item allows you to set up the CPU shutdown Temperature.  
VCORE:  
This item shows you the current system voltage.  
1.8V/3.3V/12V / 5V :  
Show you the voltage of 1.8V/3.3V/12V/5V.  
SYSTEM/CPU TEMPERATURE:  
This item shows you the current System/CPU temperature.  
CPU/SYSTEM/POWER FAN:  
This item shows you the current CPU/ SYSTEM /Power FAN speed.  
Page: 4-23  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-10. FREQUENCY/VOLTAGE CONTROL  
Choose 〝FREQUENCY CONTROL〞 from the main menu, a display  
will be shown on screen as below:  
Phoenix – AwardBIOS CMOS Setup Utility  
Frequency Control  
Auto Detect PCI Clk  
Spread Spectrum  
[Enabled]  
[Enabled]  
Item Help  
Menu Level  
▶
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Frequency / Voltage Control Setup Screen  
AUTO DETECT DIMM/PCI CLK:  
This item allows you to enable or disable auto detect DIMM/PCI Clock.  
SPREAD SPECTRUM:  
This item allows you to enable or disable the spread spectrum modulate.  
Page: 4-24  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-11. LOAD FAIL-SAFE DEFAULTS  
By pressing the <ENTER> key on this item, you get a confirmation dialog  
box with a message similar to the following:  
Load Fail-Safe Defaults ( Y/N ) ? N  
To use the BIOS default values, change the prompt to "Y" and press the  
<Enter > key. CMOS is loaded automatically when you power up the  
system.  
4-12. LOAD OPTIMIZED DEFAULTS  
When you press <Enter> on this category, you get a confirmation dialog  
box with a message similar to the following:  
Load Optimized Defaults ( Y/N ) ? N  
Pressing "Y" loads the default values that are factory setting for optimal  
performance system operations.  
Page: 4-25  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-13. PASSWORD SETTING  
User is allowed to set either supervisor or user password, or both of them.  
The difference is that the supervisor password can enter and change the  
options of the setup menus while the user password can enter only but do not  
have the authority to change the options of the setup menus.  
TO SET A PASSWORD  
When you select this function, the following message will appear at the  
center of the screen to assist you in creating a password.  
Enter Password:  
Type the password up to eight characters in length, and press < Enter >.  
The password typed now will clear any previously entered password from  
CMOS memory. You will be asked to confirm the password. Type the  
password again and press the < Enter > key. You may also press < Esc >  
to abort the selection and not enter a password.  
ꢀ User should bear in mind that when a password is set, you will be  
asked to enter the password everything you enter CMOS setup Menu.  
TO DISABLE THE PASSWORD  
To disable the password, select this function (do not enter any key when  
you are prompt to enter a password), and press the <Enter> key and a  
message will appear at the center of the screen:  
PASSWORD DISABLED!!!  
Press any key to continue...  
Press the < Enter > key again and the password will be disabled. Once the  
password is disabled, you can enter Setup freely.  
Page: 4-26  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-14. SAVE & EXIT SETUP  
After you have completed adjusting all the settings as required, you must  
remember to save these setting into the CMOS RAM. To save the settings,  
select “SAVE & EXIT SETUP” and press <Enter>, a display will be shown  
as follows:  
Phoenix - AwardBIOS CMOS Setup Utility  
►Standard CMOS Features  
►Advanced BIOS Features  
►Advanced Chipset Features  
►Integrated Periphera
►Power Management  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
word  
Save to CMOS and EXIT Y/N)? Y  
etup  
Saving  
►PnP/PCI Configura  
►PC Health Status  
Esc : Quit  
↑↓→← : Select Item  
F10 : Save & Exit Setup  
Save Data to CMOS  
When you confirm that you wish to save the settings, your system will be  
automatically restarted and the changes you have made will be implemented.  
You may always call up the setup program at any time to adjust any of the  
individual items by pressing the <Del> key during boot up.  
Page: 4-27  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-15. EXIT WITHOUT SAVING  
If you wish to cancel any changes you have made, you may select the  
“EXIT WITHOUT SAVING” and the original setting stored in the CMOS  
will be retained. The screen will be shown as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
►Standard CMOS Features  
►Advanced BIOS Features  
►Advanced Chipset Features  
►Integrated Periphera
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
word  
Quit Without Saving (Y/N)? N  
►Power Management  
►PnP/PCI Configura  
►PC Health Status  
etup  
Saving  
Esc : Quit  
↑↓→← : Select Item  
F10 : Save & Exit Setup  
Abandon all Datas  
Page: 4-28  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
A
EXPANSION BUS  
This appendix indicates the pin assignments.  
Section includes:  
z PCI BUS Pin Assignment  
Page: A-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
A
Expansion Bus  
PCI BUS PIN ASSIGNMENT  
Like ISA-BUS connector, the PCI-BUS edge connector is also divided into two  
sets: one consists of 98-pin; the other consists of 22-pin.  
The pin assignments are as follows :  
B1  
B62  
B52  
B49  
A49 A52  
A1  
A62  
B
A
B
A
PIN  
B1  
B2  
B3  
B4  
B5  
B6  
B7  
B8  
B9  
ASSIGNMENT  
PIN  
A1  
A2  
A3  
A4  
A5  
A6  
A7  
A8  
A9  
ASSIGNMENT  
TRST#  
+12V  
TMS  
TDI  
PIN  
ASSIGNMENT  
PIN  
ASSIGNMENT  
-12V  
TCK  
GND  
TDO  
+5V  
+5V  
INTB#  
INTD#  
REQ3#  
B31 +3.3V  
B32 AD17  
B33 C/BE2#  
B34 GND  
B35 IRDY#  
B36 +3.3V  
B37 DEVSEL#  
B38 GND  
B39 LOCK#  
B40 PERR#  
B41 +3.3V  
B42 SERR#  
B43 +3.3V  
B44 C/BE1#  
B45 AD14  
B46 GND  
B47 AD12  
B48 AD10  
B49 GND  
B52 AD08  
B53 AD07  
B54 +3.3V  
B55 AD05  
B56 AD03  
B57 GND  
B58 AD01  
B59 +5V(I/O)  
B60 ACK64#  
B61 +5V  
A31 AD18  
A32 AD16  
A33 +3.3V  
A34 FRAME#  
A35 GND  
A36 TRDY#  
A37 GND  
A38 STOP#  
A39 +3.3V  
A40 SDONE  
A41 SB0#  
A42 GND  
A43 PAR  
A44 AD15  
A45 +3.3V  
A46 AD13  
A47 AD11  
A48 GND  
A49 AD09  
A52 C/BE0#  
A53 +3.3V  
A54 AD06  
A55 AD04  
A56 GND  
A57 AD02  
A58 AD00  
A59 +5V(I/O)  
A60 REQ64#  
A61 +5V  
+5V  
INTA#  
INTC#  
+5V  
CLKC  
B10 REQ1#  
B11 GNT3#  
B12 GND  
B13 GND  
B14 CLKA  
B15 GND  
B16 CLKB  
B17 GND  
B18 REQ0#  
B19 +5V(I/O)  
B20 AD31  
B21 AD29  
B22 GND  
B23 AD27  
B24 AD25  
B25 +3.3V  
B26 C/BE3#  
B27 AD23  
B28 GND  
B29 AD21  
B30 AD19  
A10 +5V(I/O)  
A11 CLKD  
A12 GND  
A13 GND  
A14 GNT1#  
A15 RST#  
A16 +5V(I/O)  
A17 GNT0#  
A18 GND  
A19 REQ2#  
A20 AD30  
A21 +3.3V  
A22 AD28  
A23 AD26  
A24 GND  
A25 AD24  
A26 GNT2#  
A27 +3.3V  
A28 AD22  
A29 AD20  
A30 GND  
B62 +5V  
A62 +5V  
Page: A-2  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
TECHNICAL  
SUMMARY  
B
This section introduce you the maps concisely.  
Section includes:  
z Block Diagram  
z Interrupt Map  
z RTC & CMOS RAM Map  
z Timer & DMA Channels Map  
z I / O & Memory Map  
Page: B-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
BLOCK DIAGRAM  
Page: B-2  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
INTERRUPT MAP  
IRQ  
0
ASSIGNMENT  
System TIMER  
1
2
Keyboard  
Cascade  
3
4
5
6
Serial port 2  
Serial port 1  
Available  
Floppy  
7
8
9
10  
11  
12  
13  
14  
15  
Parallel port 1  
RTC clock  
Available  
Available  
Available  
PS/2 Mouse  
Math coprocessor  
IDE1  
IDE2  
Page: B-3  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
RTC & CMOS RAM MAP  
CODE  
ASSIGNMENT  
00  
01  
02  
Seconds  
Second alarm  
Minutes  
03  
Minutes alarm  
04  
Hours  
05  
Hours alarm  
06  
Day of week  
07  
Day of month  
08  
Month  
09  
Year  
0A  
0B  
0C  
0D  
0E  
0F  
10  
Status register A  
Status register B  
Status register C  
Status register D  
Diagnostic status byte  
Shutdown byte  
Floppy Disk drive type byte  
Reserve  
11  
12  
13  
Hard Disk type byte  
Reserve  
14  
Equipment byte  
15  
16  
17  
18  
30  
31  
32  
33  
Base memory low byte  
Base memory high byte  
Extension memory low byte  
Extension memory high byte  
Reserved for extension memory low byte  
Reserved for extension memory high byte  
Date Century byte  
Information Flag  
Reserve  
34-3F  
40-7f  
Reserved for Chipset Setting Data  
Page: B-4  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
TIMER & DMA CHANNELS MAP  
Timer Channel Map :  
Timer Channel  
Assignment  
System timer interrupt  
DRAM Refresh request  
Speaker tone generator  
0
1
2
DMA Channel Map :  
DMA Channel  
Assignment  
Available  
Available  
Floppy  
Available  
Cascade  
Available  
Available  
Available  
0
1
2
3
4
5
6
7
Page: B-5  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
I/O & MEMORY MAP  
Memory Map :  
MEMORY MAP  
0000000-009FFFF  
ASSIGNMENT  
System memory used by DOS and  
application  
00A0000-00BFFFF  
00C0000-00DFFFF  
Display buffer memory for VGA/ EGA /  
CGA / MONOCHROME adapter  
Reserved for I/O device BIOS ROM or  
RAM buffer.  
00E0000-00EFFFF  
00F0000-00FFFFF  
0100000-FFFFFFF  
Reserved for PCI device ROM  
System BIOS ROM  
System extension memory  
I/O Map :  
I/O MAP  
000-01F  
020-021  
022-023  
040-05F  
060-06F  
070-07F  
080-09F  
0A0-0BF  
0C0-0DF  
0F0-0FF  
1F0-1F8  
278-27F  
2B0-2DF  
2F8-2FF  
360-36F  
378-37F  
3B0-3BF  
3C0-3CF  
3D0-3DF  
3F0-3F7  
3F8-3FF  
ASSIGNMENT  
DMA controller (Master)  
Interrupt controller (Master)  
Chipset controller registers I/O ports.  
Timer control regsiters.  
Keyboard interface controller (8042)  
RTC ports & CMOS I/O ports  
DMA register  
Interrupt controller (Slave)  
DMA controller (Slave)  
Math coprocessor  
Hard Disk controller  
Parallel port-2  
Graphics adapter controller  
Serial port-2  
Net work ports  
Parallel port-1  
Monochrome & Printer adapter  
EGA adapter  
CGA adapter  
Floppy disk controller  
Serial port-1  
Page: B-6  
PMB-601LF USER′S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jasco Mouse HO97990 User Manual
JVC Camcorder Camcorder User Manual
JVC CD Player KD G737 User Manual
JVC CD Player XL MV7000GD User Manual
JVC Stereo Receiver RX 558RBK User Manual
Kenwood Computer Monitor DDX7017 DDX7047 User Manual
Kenwood Marine Radio TK 7160 User Manual
Kenwood Mixer Chef KM030 series Major KM040 series User Manual
Kicker Speaker ES104 User Manual
Klipsch Speaker VB 15 User Manual