Intel Computer Hardware PMB 531LF User Manual

USER’S  
MANUAL  
PMB-531LF  
Intel® Core Duo/Solo  
Mini-ITX Motherboard  
With VGA/Audio/LAN  
PMB-531LF M3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright Notice  
FCC NOTICE  
This equipment has been tested and found to comply with the limits for a  
Class A digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful  
interference when the equipment is operated in  
a
commercial  
environment. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instruction manual, may cause harmful interference to radio  
communications. Operation of this equipment in a residential area is  
likely to cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
You are cautioned that any change or modifications to the equipment not  
expressly approve by the party responsible for compliance could void  
your authority to operate such equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
TABLE OF CONTENTS  
CHAPTER 1 INTRODUCTION  
1-1  
1-2  
1-3  
About This Manual ........................................................ 1-2  
System Specification ...................................................... 1-3  
Safety Precautions .........................................................  
1-6  
CHAPTER 2 HARDWARE CONFIGURATION  
2-1  
2-2  
2-3  
2-4  
2-5  
2-6  
2-7  
2-8  
2-9  
Jumper & Connector Quick Reference Table ................ 2-2  
Component Locations .................................................... 2-3  
How to Set the Jumpers ................................................. 2-4  
COM Port Connector ……..…………………………... 2-6  
COM3/4 RI& Voltage Selection ………………………. 2-8  
RS232/422/485(COM2) Selection ................................  
2-10  
Keyboard and PS/2 Mouse Connector .....................….. 2-11  
Reset Connector ............................................................  
2-11  
Hard Disk Drive LED Connector .................................. 2-12  
2-10 ATX Power Button ….................................................... 2-12  
2-11 External Speaker Connector .......................................... 2-12  
2-12 PLed Connector ……..................................................... 2-13  
2-13 Clear CMOS Data Selection …………………………  
2-14 CPU Fan Connector …………………………………..  
2-13  
2-14  
2-15 System Fan Connector ………………………………… 2-14  
2-16 Hard Disk Drive Connector ........................................... 2-15  
2-17 VGA Connector …………………..…………………… 2-16  
2-18 Serial ATA Connector ………………………………… 2-17  
2-19 Universal Serial Bus Connector ………………………  
2-20 USB & LAN Connector ………………………………  
2-21 IrDA Connector ……………………………………….  
2-22 ATX Power Connector ……………………………….  
2-18  
2-19  
2-20  
2-20  
2-23 Sound Connector ……………………………………… 2-21  
2-24 CD Audio-In Connector ………………………………. 2-22  
2-25 LVDS Connector ……………………………………… 2-22  
2-26 Inverter Connector …………………………………….. 2-23  
2-27 LVDS Panel Voltage Selection ……………………….. 2-23  
2-28 FSB Frequency Selection ……………………………..  
2-29 Power State Selection …………………………………  
2-30 Reset/NMI Watchdog Selection ………………………  
2-31 CF Card Master/ Slave Selection ……………………..  
2-24  
2-25  
2-26  
2-27  
2-32 TV Out Connector …………………………………….. 2-28  
2-33 Memory Installation …………………………………… 2-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
CHAPTER 3 SOFTWARE UTILITIES  
3-1  
3-2  
3-3  
3-4  
3-5  
3-6  
3-7  
3-8  
3-8  
Introduction …………..........................................…....... 3-2  
VGA Driver Utility ……………………………….…… 3-3  
Flash BIOS Update ..............................................…....... 3-4  
LAN Driver Utility …...........................................…...... 3-6  
Sound Driver Utility …………………………………… 3-7  
Intel Chipset Software Installation Utility …..……..….. 3-8  
USB2.0 Software Installation Utility ………………….. 3-9  
RAID Software Installation Utility ……………………. 3-10  
Watchdog Timer Configuration ……………………….. 3-11  
CHAPTER 4 AWARD BIOS SETUP  
4-1  
4-2  
4-3  
4-4  
4-5  
4-6  
4-7  
4-8  
4-9  
Introduction ...................................................................  
Entering Setup ...............................................................  
The Standard CMOS Features ………............................ 4-4  
The Advanced BIOS Features .......................................  
Advanced Chipset Features ...........................................  
Integrated Peripherals …...............................................  
Power Management Setup ............................................. 4-19  
PNP/PCI Configuration …............................................. 4-20  
PC Health Status …….................................................... 4-22  
4-2  
4-3  
4-8  
4-11  
4-14  
4-10 Load Fail-Safe Defaults ................................................. 4-23  
4-11 Load Optimized Defaults .........................................…. 4-23  
4-12 Password Setting ……………………………………… 4-24  
4-13 Save & Exit Setup .........................................................  
4-14 Exit Without Saving …………………………………  
4-25  
4-26  
APPENDIX A EXPANSION BUS  
Mini PCI Bus Pin Assignment ................................................... A-2  
Compact Flash Card Connector Pin Assignment ……………... A-4  
APPENDIX B TECHNICAL SUMMARY  
Block Diagram ........................................................................... B-2  
Interrupt Map ............................................................................ B-3  
RTC & CMOS RAM Map ........................................................ B-4  
Timer & DMA Channels Map .................................................. B-5  
I/O & Memory Map ...............................................…................ B-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
1
INTRODUCTION  
This chapter gives you the information for PMB-531LF. It also  
outlines the System specifications.  
Section includes:  
z About This Manual  
z System Specifications  
z Safety Precautions  
Experienced users can skip to chapter 2 on page 2-1  
for a Quick Start.  
Page:1-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
1-1. ABOUT THIS MANUAL  
Thank you for purchasing our PMB-531LF Intel® Core Duo/Solo  
Mainboard enhanced with VGA/Sound/LAN, which is fully PC / AT  
compatible. The PMB-531LF provides faster processing speed, greater  
expandability and can handle more tasks than before. This manual is  
designed to assist you how to install and set up the system. It contains four  
chapters. The user can apply this manual for configuration according to the  
following chapters:  
Chapter 1 Introduction  
This chapter introduces you to the background of this manual, and the  
specifications for this system. The final page of this chapter will indicate  
how to avoid damaging this board.  
Chapter 2 Hardware Configuration  
This chapter outlines the component locations and their functions. In the  
end of this chapter, you will learn how to set jumper and how to configure  
this card to meet your own needs.  
Chapter 3 Software Utilities  
This chapter contains helpful information for proper installations of the  
VGA utility, LAN utility, Sound utility, and Flash BIOS Update. It also  
describes the Watchdog-timer configuration.  
Chapter 4 Award BIOS Setup  
This chapter indicates you how to set up the BIOS configurations.  
Appendix A Expansion Bus  
This Appendix introduces you the expansion bus for PCI-E x16 BUS.  
Appendix B Technical Summary  
This section gives you the information about the Technical maps.  
Page: 1-2  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
1-2. SYSTEM SPECIFICATIONS  
z CPU:  
Intel® Core Duo up to 2.33GHz.  
Intel® Core Solo up to 1.83GHz.  
Intel® Core Duo ULV up to 1.2 GHz.  
Intel® Core Solo ULV up to 1.2 GHz.  
Auto detect voltage regulator.  
z CHIPSET:  
Intel® 945GM + ICH7R (FSB: 533/667MHz)  
z MEMORY :  
2 x 200-pin DDR2 SO-DIMM  
Support DDR II 667 SDRAM up to 2GB.  
z CACHE :  
Built-in CPU.  
z REAL-TIME CLOCK :  
256-byte battery backed CMOS RAM.  
Hardware implementation to indicate century rollover.  
z BIOS :  
Phoenix-AwardBIOSfor plug & play function.  
4/8MB with VGA BIOS.  
Easy update 512KB flash EEPROM.  
Support S/IO Setup.  
z KEYBOARD CONNECTOR :  
Mini DIN connector.  
Supports for AT/PS2 keyboard.  
z MOUSE CONNECTOR :  
Mini DIN connector.  
Supports for PS/2 Mouse.  
z BUS SUPPORT :  
1 PCI-E (x16) Slot (SDVO), Mini-PCI, CF (only available if no IDE device  
attached)  
Page: 1-3  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
z DISPLAY :  
Built-in Intel 945GM, support for CRT, LVDS, TV-Out.  
Onboard 15-pin VGA D-SUB connector, support for resolution on QXGA  
Monitor.  
z IDE INTERFACE :  
One IDE ports support up to two IDE devices.  
Supports Ultra DMA 33.  
z SERIAL ATA PORT :  
Two S-ATA connectors from ICH7R.  
z USB CONNECTOR :  
Support up to six USB 2.0 ports.  
z LAN ADAPTER :  
LAN: Intel® 82573V (10/100/1000 Mbps)  
Support wake-on-LAN function.  
z SERIAL PORT :  
Four high speed 16550 Compatible UARTs with Send / Receive 16 Byte  
FIFOs; COM1/3/4:RS-232; COM2: RS-232/422/485  
MIDI Compatible  
Programmable Baud Rate Generator  
z SOUND :  
Realtek ALC655 (AC’97 Codec).  
Fully Compliant AC’97 Analog I/O Component  
16-Bit Stereo Full-Duplex Codec  
Four Analog Line-level Stereo Inputs for Connection.  
High Quality CD Input with Ground Sense  
Stereo Line-Level Output  
Interface: Line-In, Line-Out, Microphone, and CD Audio-In.  
z HARDWARE MONITORING FUNCTION :  
Monitor Voltage, CPU temperature, & Cooling fan speed.  
If CPU Temperature is over setting, the buzzer will send out a warming (only  
under DOS system).  
Page: 1-4  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
z IRDA PORT :  
5-pin Infrared port, support IrDA v1.0 SIR protocol  
z GREEN FUNCTION :  
Controlled by hardware and software.  
z LED INDICATOR :  
System power  
Hard Disk access  
LAN LED indicator  
z DMA CONTROLLER :  
8237 x 2  
z DMA CHANNELS :  
7
z INTERRUPT CONTROLLERS :  
82C59 x 2  
z INTERRUPT LEVELS :  
15  
z OPERATING TEMPERATURE :  
0 to 60°C.  
z BOARD DIMENSIONS :  
170 mm x 170 mm, 6.69” x 6.69”  
z BOARD NET WEIGHT :  
810 gram.  
Page: 1-5  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
1
Introduction  
1-3. SAFETY PRECAUTIONS  
Follow the messages below to avoid your systems from damage:  
1. Keep your system away from static electricity on all occasions.  
2. Prevent electric shock. Don‘t touch any components of this card when the  
card is power-on. Always disconnect power when the system is not in use.  
3. Disconnect power when you change any hardware devices. For instance,  
when you connect a jumper or install any cards, a surge of power may  
damage the electronic components or the whole system.  
Page: 1-6  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
HARDWARE  
CONFIGURATION  
2
** QUICK START **  
Helpful information describes the jumper & connector settings, and  
component locations.  
Section includes:  
z Jumper & Connector Quick Reference Table  
z Component Locations  
z Configuration and Jumper settings  
z Connector’s Pin Assignments  
Page 2-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-1. JUMPER & CONNECTOR QUICK REFERENCE TABLE  
COM Port Connector ………………………….  
COM3/4 Port RI/Voltage Selection …………...  
RS232/422/485 (COM2) Selection ……………  
Keyboard/Mouse Connector ………………….  
Reset Connector ………………………………  
Hard Disk Drive LED Connector …………….  
Power Button ………………………………..  
External Speaker Connector …………………  
Power LED Connector ………………………  
Clear CMOS Data Selection …………………  
CPU Fan Connector …………………………  
System Fan Connector ………………………  
Hard Disk Drive Connector …………………  
VGA Connector ……………………………..  
Serial ATA Connector ………………………  
Universal Serial Bus Connector ……………..  
USB & LAN Connector ……………………..  
IRDA Connector …………………………….  
ATX Power Connector ………………………  
Sound Connector ……………………………..  
CD Audio-In Connector ……………………..  
LVDS Connector ……………………………..  
Inverter Connector ……………………………  
LVDS Panel Voltage Selection ……………….  
FSB Frequency Selection ……………………..  
Power State Selection …………………..…….  
Reset/NMI Watchdog Selection ………………  
CF Card Master/ Slave Selecction …………….  
TV Out Connector …………………………….  
Memory Installation …………………………..  
COM1,COM2,COM3,COM4  
JP16,JP17  
JP15  
JKBMS1  
JPANEL1 ( 1315 )  
JPANEL1 ( 0911 )  
JPANEL1 ( 1416 )  
JPANEL1 ( 1357 )  
JPANEL1 ( 081012 )  
JP2  
FAN1  
FAN2, JCFAN1  
IDE1  
VGA1  
SATA1,SATA2  
USB1, USB2  
J2  
IRDA1  
PW1, JATXPWR2  
JAUDIO1  
JCDIN1  
J1  
J4  
JP4  
JP5JP6JP7  
JP21(1-2), JP22  
JP21  
JP14  
JP1  
DIM1, DIM2  
Page: 2-2  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-2. COMPONENT LOCATIONS  
PMB-531LF Connector, Jumper and Component locations  
Page: 2-3  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-3. HOW TO SET THE JUMPERS  
You can configure your board by setting jumpers. Jumper is consists of  
two or three metal pins with a plastic base mounted on the card, and by  
using a small plastic "cap", Also known as the jumper cap (with a metal  
contact inside), you are able to connect the pins. So you can set-up your  
hardware configuration by "open" or "close" pins.  
The jumper can be combined into sets that called jumper blocks. When  
the jumpers are all in the block, you have to put them together to set up  
the hardware configuration. The figure below shows how this looks like.  
JUMPERS AND CAPS  
If a jumper has three pins (for examples, labelled PIN1, PIN2, and PIN3),  
You can connect PIN1 & PIN2 to create one setting by shorting. You can  
either connect PIN2 & PIN3 to create another setting. The same jumper  
diagrams are applied all through this manual. The figure below shows  
what the manual diagrams look and what they represent.  
Page: 2-4  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
JUMPER DIAGRAMS  
Jumper Cap  
looks like this  
2 pin Jumper  
looks like this  
3 pin Jumper  
looks like this  
Jumper Block  
looks like this  
JUMPER SETTINGS  
2 pin Jumper close(enabled)  
Looks like this  
1
1
3 pin Jumper  
2-3 pin close(enabled)  
Looks like this  
1
1
Jumper Block  
1-2 pin close(enabled)  
Looks like this  
1
2
1
2
Page: 2-5  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-4. COM PORT CONNECTOR  
COM1 : COM1 Connector  
COM1 is fixed as RS-232.  
The pin assignment is as follows :  
PIN  
1
2
ASSIGNMENT  
DCD1  
RX1  
3
TX1  
4
5
DTR1  
GND  
6
7
DSR1  
RTS1  
8
CTS1  
9
RI1  
COM2 : COM2 Connector  
The COM2 is selectable as RS-232/422/485.  
The pin assignment is as follows :  
ASSIGNMENT  
PIN  
RS-232  
DCD2  
RX2  
RS-422  
TX-  
TX+  
RX+  
RX-  
GND  
RTS-  
RTS+  
CTS+  
CTS-  
RS-485  
TX-  
TX+  
RX+  
RX-  
GND  
NC  
NC  
NC  
NC  
1
2
3
4
5
6
7
8
9
TX2  
DTR2  
GND  
DSR2  
RTS2  
CTS2  
RI2  
Page: 2-6  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
COM3 : COM3 Connector  
COM3 is fixed as RS-232.  
The pin assignment is as follows :  
PIN  
1
2
ASSIGNMENT  
DCD3  
RX3  
3
TX3  
4
5
DTR3  
GND  
6
7
8
9
DSR3  
RTS3  
CTS3  
RI3  
10  
NC  
COM3’s pin 9 is selectable for RI, +5V or +12V. For more information,  
please refer to our “2-5 COM RI and Voltage Selection”.  
COM4 : COM4 Connector  
COM4 is fixed as RS-232.  
The pin assignment is as follows :  
PIN  
1
2
ASSIGNMENT  
DCD4  
RX4  
3
TX4  
4
5
DTR4  
GND  
6
7
8
9
DSR4  
RTS4  
CTS4  
RI4  
10  
NC  
COM4’s pin 9 is selectable for RI, +5V or +12V. For more information,  
please refer to our “2-5 COM RI and Voltage Selection”.  
Page: 2-7  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-5. COM3/4 RI & VOLTAGE SELECTION  
JP16 : COM3 RI & Voltage Selection  
The selections are as follows:  
COM  
JUMPER  
SETTINGS  
JUMPER  
ILLUSTRATION  
SELECTION  
5V  
5-6  
3-4  
COM3  
12V  
RI  
1-2  
***Manufacturing Default -- RI.  
Page: 2-8  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
JP17 : COM4 RI & Voltage Selection  
The selections are as follows:  
COM  
JUMPER  
SETTINGS  
JUMPER  
ILLUSTRATION  
SELECTION  
5V  
5-6  
COM4  
12V  
3-4  
1-2  
RI  
***Manufacturing Default -- RI.  
Page: 2-9  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-6. RS232/422/485 (COM2) SELECTION  
JP15 : RS-232/422/485 (COM2) Selection  
This connector is used to set the COM2 function.  
The jumper settings are as follows :  
COM 2  
Function  
Jumper Settings  
(pin closed)  
Jumper  
Illustrations  
RS-232  
RS-422  
RS-485  
All Open  
1-2, 3-4, 9-10  
1-2, 5-6, 7-8  
*** Manufacturing default -- RS-232.  
Page: 2-10  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-7. PS/2 KEYBOARD AND MOUSE CONNECTOR  
JKBMS1 : PS/2 Keyboard and Mouse Connector  
The pin assignments are as follows :  
PIN  
1
ASSIGNMENT  
KBDATA  
2
NC  
3
4
5
6
GND  
5VSB  
KBCLK  
NC  
7
8
MSDATA  
NC  
9
GND  
5VSB  
MSCLK  
NC  
10  
11  
12  
2-8. RESET CONNECTOR  
JPANEL1 (13, 15) : Reset Connector.  
The pin assignment is as follows :  
PIN  
13  
ASSIGNMENT  
GND  
15  
RST_BTN  
Page: 2-11  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-9. HARD DISK DRIVE LED CONNECTOR  
JPANEL1 (9, 11) : Hard Disk Drive LED Connector  
The pin assignment is as follows :  
PIN  
9
ASSIGNMENT  
HD_LED+  
11  
HD_LED-  
2-10. ATX POWER BUTTON  
JPANEL1 (14, 16) : ATX Power Button  
The pin assignment is as follows :  
PIN  
14  
ASSIGNMENT  
PW_BN1  
16  
PW_BN2  
2-11. EXTERNAL SPEAKER CONNECTOR  
JPANEL1 (1, 3, 5, 7) : External Speaker Connector  
The pin assignment is as follows :  
PIN  
ASSIGNMENT  
1
3
5
7
P_SPK  
NC  
NC  
VCC  
Page: 2-12  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-12. POWER LED CONNECTOR  
JPANEL1 (8, 10, 12) : Power LED Connector  
The pin assignment is as follows:  
PIN  
8
ASSIGNMENT  
PW_LED+  
10  
12  
PW_LED+  
PW_LED-  
2-13. CLEAR CMOS DATA SELECTION  
JP2 : Clear CMOS Data Selection  
The selections are as follows :  
JUMPER SETTING  
FUNCTION  
JUMPER  
ILLUSTRATION  
(pin closed)  
Keep CMOS  
Clear CMOS  
1-2  
2-3  
*** Manufacturing Default – Keep CMOS.  
Note: To clear CMOS data, user must power-off the computer and set  
the jumper to “Clear CMOS” as illustrated above. After five to  
six seconds, set the jumper back to “Normal” and power-on the  
computer.  
Page: 2-13  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-14. CPU FAN CONNECTOR  
FAN1 : CPU Fan connector  
The pin assignment is as follows:  
PIN  
ASSIGNMENT  
LPC1_FANPWM1  
+12V  
1
2
3
LPC1_FANIO1  
2-15. SYSTEM FAN CONNECTOR  
FAN2System Fan connector  
The pin assignment is as follows  
PIN  
ASSIGNMENT  
LPC1_FANPWM2  
+12V  
1
2
3
LPC1_FANIO2  
JCFAN1System Fan connector  
The pin assignment is as follows:  
PIN  
ASSIGNMENT  
1
2
3
GND  
+12V  
NC  
Page: 2-14  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-16. HARD DISK DRIVE CONNECTOR  
The PMB-531LF possesses one HDD connector: IDE1.  
IDE1: Hard Disk Drive Connector  
The pin assignments are as follows:  
PIN  
ASSIGNMENT  
PIN  
ASSIGNMENT  
1
3
5
7
IDERST  
PDD7  
PDD6  
PDD5  
PDD4  
PDD3  
PDD2  
PDD1  
PDD0  
2
4
6
8
GND  
PDD8  
PDD9  
PDD10  
PDD11  
PDD12  
PDD13  
PDD14  
PDD15  
NC  
GND  
GND  
GND  
PD_CSEL  
GND  
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
42  
44  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
41  
43  
GND  
PDREQ  
PDIOW#  
PDIOR#  
PIORDY  
PDDACK#  
IRQ14  
PDA1  
NC  
P66 DETECT  
PDA2  
PDCS3#  
GND  
VCC  
GND  
PDA0  
PDCS1#  
IDEACTN  
VCC  
GND  
Page: 2-15  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-17. VGA CONNECTOR  
VGA1: VGA Connector  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
RED  
2
3
GREEN  
BLUE  
4
NC  
5
GND  
6
GND  
7
GND  
8
GND  
9
VCC  
10  
11  
12  
13  
14  
15  
GND  
NC  
VGA IIC DATA  
HSYNC  
VSYNC  
VGA IIC CLK  
Page: 2-16  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-18. SERIAL ATA CONNECTOR  
SATA1~SATA2: The PMB-531LF possesses two Serial ATA  
Connector, SATA1~SATA2. The pin assignments are as follows:  
SATA1SATA Connector  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
GND  
2
3
4
SATA_TXP0  
SATA_TXN0  
GND  
5
6
7
SATA_RXN0  
SATA_RXP0  
GND  
SATA2SATA Connector  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
GND  
2
3
4
SATA_TXP1  
SATA_TXN1  
GND  
5
6
7
SATA_RXN1  
SATA_RXP1  
GND  
Page: 2-17  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-19. UNIVERSAL SERIAL BUS CONNECTOR  
USB1Universal Serial Bus Connector  
The pin assignments are as follows:  
PIN  
1
2
3
4
ASSIGNMENT  
VCCUSB2  
VCCUSB2  
USB4N  
USB5N  
USB4P  
5
6
USB5P  
7
GND  
8
GND  
9
GND  
10  
GND  
JUSB2Universal Serial Bus Connector  
The pin assignments are as follows:  
PIN  
A1  
A2  
A3  
A4  
B1  
B2  
B3  
B4  
ASSIGNMENT  
VCCUSB1  
USB0N  
USB0P  
GND  
VCCUSB1  
USB1N  
USB1P  
GND  
Page: 2-18  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-20. USB&LAN CONNECTOR  
J2USB & LAN Connector  
The pin assignments are as follows:  
LAN:  
PIN  
1
ASSIGNMENT  
MDI_0P  
2
3
MDI_0N  
MDI_1P  
4
5
MDI_1N  
MDI_2P  
6
7
MDI_2N  
MDI_3P  
8
MDI_3N  
LAN LED Indicator:  
Left side LED:  
Green Color on  
10/100 LAN Speed Indicator  
Orange Color on Giga LAN Speed Indicator  
off  
No LAN switch/hub connected  
Right side LED:  
Yellow Color Blinking  
off  
LAN Message Active  
No LAN Message Active  
USB Signal  
PIN  
A1  
A2  
A3  
A4  
B1  
B2  
B3  
B4  
ASSIGNMENT  
VCCUSB0  
USB2N  
USB2P  
GND  
VCCUSB0  
USB3N  
USB3P  
GND  
Page: 2-19  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-21. IRDA CONNECTOR  
IRDA1: IrDA (Infrared) Connector  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
+5V  
2
NC  
3
IRRX  
4
GND  
5
IRTX  
2-22. ATX POWER CONNECTOR  
PW1ATX 12V Connector  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
VCC  
2
VCC  
3
GND  
4
GND  
5
+12V  
6
7
+5V SB  
VCC  
8
GND  
9
10  
PS_ON  
NC  
Page: 2-20  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
ATXPWR2ATX Connector  
The pin assignments are as follows:  
PIN  
ASSIGNMENT  
GND  
GND  
+12V  
+12V  
1
2
3
4
2-23. SOUND CONNECTOR  
JAUDIO1 : Sound Connector  
The pin assignments are as follows:  
SPDIF (inside the Line-In hole)  
PIN ASSIGNMENT  
42  
43  
44  
GND  
VCC  
AC_SPDIF0  
Line-In: light blue color  
PIN ASSIGNMENT  
32  
35  
LINE_L  
LINE_R  
SPK-Out: light green color  
PIN ASSIGNMENT  
22  
25  
SPK_L  
SPK_R  
Mic-In: pink color  
PIN ASSIGNMENT  
1
2
5
GND  
MIC_IN1  
MIC_IN2  
Page: 2-21  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-24. AUDIO CD-IN CONNECTOR  
JCDIN1Audio CD-In Connector  
The pin assignments are as follows:  
PIN  
ASSIGNMENT  
CD L  
CDGND  
CDGND  
CD R  
1
2
3
4
2-25. LVDS CONNECTOR  
J1LVDS CONNECTOR  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
LVDS_VCC  
CLKBM  
GND  
PIN  
2
ASSIGNMENT  
GND  
3
5
7
4
6
8
CLKBP  
YBM2  
GND  
YBP2  
9
YBM1  
NC  
YBP0  
GND  
CLKAM  
YAP2  
GND  
YAM1  
YAP0  
NC  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
YBP1  
NC  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
YBM0  
CLKAP  
GND  
YAM2  
YAP1  
GND  
YAM0  
NC  
LVDS_VCC  
LVDS_VCC  
Page: 2-22  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-26. INVERTER CONNECTOR  
J4LVDS Panel Voltage Selection.  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
+12V  
2
GND  
3
VCC  
4
GND  
5
ENABKL (Inverter backlight  
ON/OFF control signal)  
2-27. LVDS PANEL VOLTAGE SELECTION  
JP4LVDS Panel Voltage Selection.  
The pin assignments are as follows:  
JUMPER  
ILLUSTRATION  
JUMPER SETTING  
SELECTION  
(pin closed)  
1-3  
2-4  
+3.3V  
+5V  
3-5  
4-6  
*** Manufacturing Default – +3.3V.  
Page: 2-23  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-28. FSB FREQUENCY SELECTION  
JP5, JP6, JP7FSB Frequency Selections.  
The pin assignments are as follows:  
SELECTION  
JUMPER SETTING  
(pin closed)  
JUMPER  
ILLUSTRATION  
JP5  
JP6  
JP7  
533 MHz  
667 MHz  
2-3  
2-3  
2-3  
2-3  
open  
2-3  
*** Manufacturing Default – 667 MHz.  
Page: 2-24  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-29. POWER STATE SELECTION  
JP21(1-2), JP22Power State Selections.  
The pin assignments are as follows:  
Selections  
Jumper Setting  
Jumper Illustrations  
JP21 (Open)  
JP22 (1-2)  
ATX  
JP21 (1-2)  
JP22 (2-3)  
AT  
*** Manufacturing Default – ATX.  
Page: 2-25  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-30. RESET/ NMI SELECTIONS  
JP21Reset/ NMI Selections.  
The pin assignments are as follows:  
Selections  
Jumper Setting  
Jumper Illustration  
RESET  
3-4 CLOSE  
NMI  
5-6 CLOSE  
7-8 CLOSE  
CLEAR WDG  
GPIO For  
Customer  
9-10  
Application  
*** Manufacturing Default – Reset.  
Page: 2-26  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-31. CF CARD MASTER/SLAVE SELECTIONS  
JP14CF Card Master/ Slave Selection.  
The pin assignments are as follows:  
Selections  
Jumper Setting  
Jumper Illustration  
Master  
Close  
Slave  
Open  
*** Manufacturing Default – Slave.  
Page: 2-27  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
2
Hardware Configuration  
2-32. TV OUT CONNECTOR  
JP1TV OUT CONNECTOR  
The pin assignments are as follows:  
PIN ASSIGNMENT  
1
2
3
4
5
Luminance(Y)  
CVBS  
GND  
GND  
Chrominance(UV)  
2-33. MEMORY INSTALLATION  
PMB-531LF CPU Card can support up to 1GB in one SODIMM sockets.  
DRAM BANK CONFIGURATION  
DIMM1  
256 MB  
512 MB  
DIMM2  
256 MB  
512 MB  
Total memory size  
512 MB  
1GB  
1GB  
1GB  
2GB  
Page: 2-28  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
SOFTWARE  
UTILITIES  
3
This chapter comprises the detailed information of VGA driver, LAN  
driver, and Flash BIOS update. It also describes how to install the  
watchdog timer configuration.  
Section includes:  
z VGA Driver Utility  
z Flash BIOS Update  
z LAN Driver Utility  
z Sound Driver Utility  
z Intel® Chipset Software Installation Utility  
z USB2.0 Chipset Software Installation Utility  
z RAID Software Installation Utility  
z Watchdog Timer Configuration  
Page: 3-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-1. INTRODUCTION  
Enclosed with our PMB-531LF package is our driver utility, which may  
comes in a form of a CD ROM disc or floppy diskettes. For CD ROM disc  
user, you will only need some of the files contained in the CD ROM disc,  
please kindly refer to the following chart:  
Filename  
(Assume that CD ROM drive is D:)  
D:\Driver\VGA  
Purpose  
Intel 945GM  
For VGA driver installation  
For BIOS update utility  
For LAN Driver installation  
Realtel ALC655 AC97  
For Sound driver installation  
Intel® Chipset Software  
Installation Utility  
For Win 2000, XP,Server2003  
USB 2.0 Software Installation  
Utility  
D:\Driver\FLASH  
D:\Driver\LAN  
D:\Driver\Sound  
D:\Driver\UTILITY  
D:\Driver\USB 2.0  
For Win 2000, XP  
D:\Driver\F6f1PY32  
D:\Driver\RAID  
For RAID driver disk installation  
in F6  
RAID software and driver.  
The RAID controller management  
for windows 2000, XP, server  
2003  
User should remember to install the Utility right after the OS fully installed.  
Page:3-2  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-2. VGA DRIVER UTILITY  
The VGA interface embedded with our PMB-531LF can support a wide  
range of display. You can display CRT, PCI-E (SDVO) simultaneously  
with the same mode.  
3-2-1. Installation of VGA Driver:  
To install the VGA Driver, simply follow the following steps:  
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD  
ROM drive.  
2. Under Windows 2000/XP/2003 system, go to the directory where  
VGA driver is located.  
3. Click Setup.exe file for VGA driver installation.  
4. Follow the instructions on the screen to complete the installation.  
5. Once installation is completed, shut down the system and restart in  
order for the changes to take effect.  
Page:3-3  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-3. FLASH BIOS UPDATE  
3-3-1. System BIOS Update:  
Users of PMB-531LF can use the program “Awdflash.exe” contained in  
the Utility Disk for system BIOS and VGA BIOS update.  
3-3-2. To update VGA BIOS for LCD Flat Panel Display:  
As PMB-531LF user, you have to update the VGA BIOS for your  
specific LCD flat panel you are going to use. For doing this, you need  
two files. One is the “Awdflash.exe” file and the other is the VGA BIOS  
for ATI Rage Mobility M6 file for LCD panel display. Both file must be  
provided by the vendor or manufacturer. When you get these two files  
ready, follow the following steps for updating your VGA BIOS:  
1. Install “Awdflash.exe” from Utility Disk to Drive C.  
2. Insert the VGA BIOS file you have obtained from the vendor.  
Type the path to Awdflash.exe and execute the VGA BIOS update  
with file B531xxxx.bin  
3. C:\UTIL\AWDFLASH>AWDFLASH B531xxxx.bin  
4. The screen will display as the table fount on the next page:  
FLASH MEMORY WRITER v7.XX  
(C) Award Software 2001 All Rights Reserved  
Flash Type – SST 49LF004A /3.3V  
File Name to Program: B531xxxx.bin  
Checksum: XXXXX  
Error Message: Do You Want To Save BIOS (Y/N)  
Page:3-4  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
If you want to save up the original BIOS, enter "Y" and press < Enter >.  
If you choose "N", the following table will appear on screen.  
FLASH MEMORY WRITER v7.XX  
(C) Award Software 2001 All Rights Reserved  
Flash Type – SST 49LF004A /3.3V  
File Name to Program: B531xxxx.bin  
Checksum: XXXXX  
Error Message : Are You Sure To Program (Y/N)  
Select "Y", and the BIOS will be renewed. When you are refreshing the  
BIOS, do not turn off or reset the system, or you will damage the BIOS.  
After you have completed all the programming, the screen displays the  
table below:  
FLASH MEMORY WRITER v7.XX  
(C) Award Software 2001 All Rights Reserved  
Flash Type – SST 49LF004A /3.3V  
File Name to Program: B531xxxx.bin  
Checksum: XXXXX  
Reset System or Power off to  
accomplish update process!  
F1: Reset F10: Exit  
Please reset or power off the system, and then the Flash BIOS is fully  
implemented.  
Page:3-5  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-4. LAN DRIVER UTILITY  
3-4-1. Introduction  
PMB-531LF is enhanced with LAN function that can support various  
network adapters. Installation programs for LAN drivers are listed as  
follows:  
For more details on Installation procedure, please refer to Readme.txt  
file found on LAN DRIVER UTILITY.  
Page:3-6  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-5. SOUND DRIVER UTILITY  
3-5-1. Introduction  
The Realtek ALC655 sound function enhanced in this system is fully  
compatible with Windows 2000 and Windows XP. Below, you will find  
the content of the Sound driver :  
3-5-2. Installation Procedure for Windows 2000/XP/2003  
1. From the task bar, click on Start, and then Run.  
2. In the Run dialog box, type D:\Sound\path\setup, where  
“D:\Sound\pathname” refers to the full path to the source files.  
3. Click on the OK button or press the ENTER key.  
4. Click on the “Next” and OK prompts as they appear.  
5. Reboot the system to complete the driver installation.  
Page:3-7  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-6. INTEL® CHIPSET SOFTWARE INSTALLATION UTILITY  
3-6-1. Introduction  
The Intel® Chipset Software Installation Utility installs to the target  
system the Windows* INF files that outline to the operating system how  
the chipset components will be configured. This is needed for the  
proper functioning of the following features:  
-
-
-
-
-
Core PCI and ISAPNP Services  
AGP Support  
IDE/ATA33/ATA66/ATA100 Storage Support  
USB Support  
Identification of Intel® Chipset Components in Device Manager  
3-6-2. Installation of Utility for Windows 2000/XP/2003  
The Utility Pack is to be installed only for Windows 2000 and XP  
program.  
It should be installed right after the OS installation, kindly follow the  
following steps:  
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD  
ROM drive.  
2. Under Windows 2000/XP/2003 system, go to the directory where  
Utility Disc is located.  
3. Click Setup.exe file for utility installation.  
4. Follow the instructions on the screen to complete the installation.  
5. Once installation is completed, shut down the system and restart in  
order for the changes to take effect.  
Page:3-8  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-7. USB2.0 SOFTWARE INSTALLATION UTILITY  
3-7-1. Installation of Utility for Windows 2000/XP  
Intel USB 2.0 Enhanced Host Controller driver can only be used on  
Windows 2000 and Windows XP on Intel Desktop boards. It should be  
installed right after the OS installation, kindly follow the following steps:  
1. Place insert the Utility Disk into Floppy Disk Drive A/B or CD  
ROM drive.  
2. Under Windows 2000, and XP system, go to the directory where  
Utility Disc is located.  
3. Start the “System” wizard in control panel. (Click  
Start/Settings/Control Panel).  
4. Select “Hardware” and click “Device Manager ” button.  
5. Double Click “USB Root Hub”.  
6. Select “Driver”.  
7. Click “Install” to install the driver.  
8. Follow the instructions on the screen to complete the installation.  
9. Click “Finish” after the driver installation is complete.  
Page:3-9  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-8. RAID SOFTWARE INSTALLATION UTILITY  
3-8-1. Installation of Utility for Windows 2000/2003/XP  
The RAID controller management can be used on windows 2000 and  
windows 2003 and windows XP. It should be installed right after the OS  
installation.  
For more details on Installation procedure, please refer to Readme.txt  
file found on RAID DRIVER UTILITY.  
Page:3-10  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
3-9. WATCHDOG TIMER CONFIGURATION  
The Watch-dog Timer has a programmable time-out ranging from 1 to 255 minutes  
with one minute resolution, or 1 to 255 seconds with 1 second resolution. The units of  
the WDT timeout value are selected via bit[7] of the WDT_TIMEOUT register,  
which is located on I/O Port address 0x865h. The WDT time-out value is set through  
the WDT_VAL Runtime register, which is located on I/O Port address 0x866h.  
Setting the WDT_VAL register to 0x00 disables the WDT function Setting the  
WDT_VAL to any other non-zero value will cause the WDT to reload and begin  
counting down from the value loaded. Setting the Register located on I/O address  
0x867h and 0x868h as 00h to finish timer configuration.  
Example Code  
(1)  
;--------------------------  
Enable Watch-Dog Timer  
;--------------------------  
mov dx,(800h + 65h)  
mov al,80h  
;Time counting Unit minute or second  
;al = 00h : unit minute  
;al = 80h : unit second  
out dx,al  
mov dx,(800h + 66h) ;  
mov al,20  
;al = Watch dog Timer Second(s), 20 sec(s)  
out dx,al  
mov dx,(800h + 67h)  
mov al,00h  
out dx,al  
mov dx,(800h + 68h)  
mov al,00h  
;Start Watch Dog Timer  
out dx,al  
(2)  
;--------------------------  
Disable Watch-Dog Timer  
;--------------------------  
mov dx,(800h + 66h)  
;Disable Watch Dog Timer  
Page:3-11  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
3
Software Configuration  
mov al,00h  
out dx,al  
mov dx,(800h + 67h)  
mov al,00h  
out dx,al  
mov dx,(800h + 68h)  
mov al,00h  
;Clear Status Bit  
out dx,al  
Page:3-12  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHAPTER  
AWARD  
BIOS SETUP  
4
This chapter shows how to set up the Award BIOS.  
Section includes:  
z Introduction  
z Entering Setup  
z The Standard CMOS Features  
z The Advanced BIOS Features  
z The Advanced Chipset Features  
z Integrated Peripherals  
z Power Management Setup  
z PNP/PCI Configuration  
z PC Health Status  
z Load Fail-Safe Defaults  
z Load Optimized Defaults  
z Password Setting  
z Save and Exit Setup  
z Exit Without Saving  
Page: 4-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-1. INTRODUCTION  
This chapter will show you the function of the BIOS in managing the  
features of your system. The PMB-531LF Intel Core Duo/Solo ATX  
Motherboard is equipped with the BIOS for system chipset from Phoenix -  
Award Software Inc. This page briefly explains the function of the BIOS in  
managing the special features of your system. The following pages describe  
how to use the BIOS for system chipset Setup menu.  
Your application programs (such as word processing, spreadsheets, and  
games) rely on an operating system such as DOS or OS/2 to manage such  
things as keyboard, monitor, disk drives, and memory.  
The operating system relies on the BIOS (Basic Input and Output system), a  
program stored on a ROM (Read-only Memory) chip, to initialize and  
configure your computer's hardware. As the interface between the hardware  
and the operating system, the BIOS enables you to make basic changes to  
your system's hardware without having to write a new operating system.  
The following diagram illustrates the interlocking relationships between the  
system hardware, BIOS, operating system, and application program:  
Page: 4-2  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-2. ENTERING SETUP  
When the system is powered on, the BIOS will enter the Power-On Self  
Test (POST) routines and the following message will appear on the lower  
screen:  
PRESS <DEL> TO ENTER SETUP, ESC TO SKIP MEMORY TEST  
As long as this message is present on the screen you may press the <Del>  
key (the one that shares the decimal point at the bottom of the number  
keypad) to access the Setup program. In a moment, the main menu of the  
Award SETUP program will appear on the screen:  
Phoenix - AwardBIOS CMOS Setup Utility  
Standard CMOS Features  
Advanced BIOS Features  
Advanced Chipset Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI Configurations  
PC Health Status  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Save & Exit Setup  
Exit Without Saving  
Esc : Quit  
↑↓→← : Select Item  
F10 : Save & Exit Setup  
Time, Date, Hard Disk Type .…  
Setup program initial screen  
You may use the cursor the up/down keys to highlight the individual menu  
items. As you highlight each item, a brief description of the highlighted  
selection will appear at the bottom of the screen.  
Page: 4-3  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-3. THE STANDARD CMOS FEATURES  
Highlight theSTANDARD CMOS FEATURESand press the <ENTER>  
key and the screen will display the following table:  
Phoenix - AwardBIOS CMOS Setup Utility  
Standard CMOS Features  
Date (mm:dd:yy)  
Time (hh:mm:ss)  
Sun, Feb  
21  
2
3 :  
2003  
7
Item Help  
:
Menu Level  
IDE Channel 0 Master  
IDE Channel 0 Slave  
IDE Channel 1 Master  
IDE Channel 1 Slave  
IDE Channel 2 Master  
IDE Channel 2 Slave  
IDE Channel 3 Master  
IDE Channel 3 Slave  
[ST320014A]  
[None]  
[ None]  
Change the day,  
month, year and  
century  
[ None]  
[HDS728080PLA380]  
[HDS728080PLA380]  
[HDS728080PLA380]  
[HDS728080PLA380]  
[EGA/VGA]  
[All Errors]  
Video  
Halt On  
640K  
2006912K  
2087936K  
Base Memory  
Extended Memory  
Total Memory  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
CMOS Setup screen  
In the above Setup Menu, use the arrow keys to highlight the item and then use  
the <PgUp> or <PgDn> keys to select the value you want in each item.  
Date:  
< Month >, < Date > and <Year >. Ranges for each value are in the CMOS  
Setup Screen, and the week-day will skip automatically.  
Page: 4-4  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
Time:  
< Hour >, < Minute >, and < Second >. Use 24 hour clock format, i.e., for PM  
numbers, add 12 to the hour. For example: 4: 30 P.M. You should enter the  
time as 16:30:00.  
IDE Primary Master / Slave:  
IDE Secondary Master / Slave:  
The BIOS can automatically detect the specifications and optimal operating  
mode of almost all IDE hard drives. When you select type AUTO for a hard  
drive, the BIOS detect its specifications during POST, every time system  
boots.  
If you do not want to select drive type AUTO, other methods of selecting  
drive type are available:  
1. Match the specifications of your installed IDE hard drive(s) with the  
preprogrammed values for hard drive types 1 through 45.  
2. Select USER and enter values into each drive parameter field.  
3. Use the IDE HDD AUTO DETECTION function in Setup.  
Here is a brief explanation of drive specifications:  
Type: The BIOS contains a table of pre-defined drive types. Each  
defined drive type has a specified number of cylinders, number of heads,  
write precompensation factor, landing zone, and number of sectors.  
Drives whose specifications do not accommodate any predefine type are  
classified as type USER.  
Size: Disk drive capacity (approximate). Note that this size is usually  
greater than the size of a formatted disk given by a disk-checking  
program.  
Cyls: number of cylinders.  
Head: number of heads.  
Precomp: write precompensation cylinders.  
Landz: landing zone.  
Sector: number of sectors.  
Mode: Auto, Normal, Large or LBA.  
Auto: The BIOS automatically determines the optimal mode.  
Page: 4-5  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
ƒ
ƒ
ƒ
Normal: Maximum number of cylinders, heads, sectors  
supported are 1024, 16 and 63.  
Large: For drives that do not support LBA and have more  
than 1024 cylinders.  
LBA (Logical Block Addressing): During drive accesses, the  
IDE controller transforms the data address described by  
sector, head and cylinder number into a physical block  
address, significantly improving data transfer rates. For  
drives greater than 1024 cylinders.  
VIDEO:  
This category selects the type of video adapter used for the primary system  
monitor. Although secondary monitors are supported, you do not have to  
select the type in Setup. Available Options are as follows:  
EGA/VGA  
Enhanced Graphics Adapter/Video Graphics Array.  
For EGA, VGA, SEGA, SVGA or PGA monitor  
adapters.  
CGA 40  
CGA 80  
MONO  
Color Graphics Adapter, power up in 40 column mode.  
Color Graphics Adapter, power up in 80 column mode.  
Monochrome adapter, includes high resolution  
monochrome adapters.  
HALT ON:  
This category allows user to choose whether the computer will stop if an error  
is detected during power up. Available options are “All errors”, “No errors”,  
“All, But keyboard”, “All, But Diskette”, and “All But Disk/Key”.  
BASE MEMORY:  
Displays the amount of conventional memory detected during boot up.  
EXTENDED MEMORY:  
Displays the amount of extended memory detected during boot up.  
TOTAL MEMORY:  
Displays the total memory available in the system.  
Page: 4-6  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
HARD DISK ATTRIBUTES:  
Type  
1
Cylinders  
306  
Heads  
4
V-P comp  
128  
LZone  
305  
615  
615  
940  
940  
615  
511  
733  
901  
820  
855  
855  
319  
733  
000  
663  
977  
977  
1023  
732  
732  
733  
336  
976  
1023  
1223  
1223  
1223  
1023  
1023  
1023  
926  
1023  
1023  
1023  
1023  
1023  
1023  
1023  
820  
Sect  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
00  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
26  
17  
26  
33  
Capacity  
10  
2
615  
4
300  
300  
512  
512  
65535  
256  
65535  
65535  
65535  
65535  
65535  
128  
65535  
0000  
0000  
300  
65535  
512  
300  
300  
20  
30  
62  
46  
20  
30  
30  
112  
20  
35  
49  
20  
42  
00  
20  
40  
56  
59  
30  
42  
30  
10  
40  
76  
71  
111  
152  
68  
93  
83  
3
615  
6
4
940  
8
5
940  
6
6
615  
4
7
642  
8
8
733  
5
9
900  
820  
15  
3
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
47  
855  
855  
306  
733  
000  
612  
977  
977  
1024  
733  
733  
733  
306  
5
7
8
7
0
4
5
7
7
5
7
5
4
5
9
7
11  
15  
8
11  
11  
9
10  
12  
13  
14  
2
16  
15  
6
300  
0000  
977  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65535  
65335  
AUTO  
1024  
1224  
1224  
1224  
1024  
1024  
918  
925  
69  
85  
1024  
1024  
1024  
1024  
1024  
1024  
918  
102  
110  
119  
17  
136  
114  
40  
42  
65  
40  
61  
820  
1024  
1024  
809  
809  
776  
5
5
6
6
1023  
1023  
852  
852  
775  
8
100  
Award Hard Disk Type Table  
Page: 4-7  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-4. THE ADVANCED BIOS FEATURES  
Choose theADVANCED BIOS FEATURESin the main menu, the screen  
shown as below.  
Phoenix - AwardBIOS CMOS Setup Utility  
Advanced BIOS Features  
[Press Enter]  
[Press Enter]  
CPU Feature  
Item Help  
Hard Disk Boot Priority  
[CDROM]  
[Hard Disk]  
[LS120]  
[Enabled]  
[Setup]  
First Boot Device  
Second Boot Device  
Third Boot Device  
Boot Other Device  
Security Option  
Menu Level  
[Enabled]  
[1.4]  
APIC Mode  
MPS Version Control For OS  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
BIOS Features Setup Screen  
The “BIOS FEATURES SETUP” allow you to configure your system for  
basic operation. The user can select the system’s boot-up sequence and  
security.  
A brief introduction of each setting is given below.  
Page: 4-8  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
CPU FEATURE:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
CPU Feature  
Delay Prior to Thermal  
Thermal Management  
X TM2 Bus Ratio  
X TM2 Bus VID  
[16 Min]  
[Thermal Monitor 1]  
12X  
1.404V  
[Auto]  
Item Help  
Menu Level  
C1E Function  
Execute Disable Bit  
[Enabled]  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. Delay Prior to Thermal  
The Delay Prior To Thermal BIOS feature controls the activation of  
the Thermal Monitor's automatic mode. It allows you to determine  
when the Pentium-M’s Thermal Monitor should be activated in  
automatic mode after the system boots.  
2.  
Thermal Management  
The used Thermal Monitor  
3. C1E Function  
This is enabled to reduce power during idle operation  
4. Execute Disable Bit  
To select enable or disable the No-Execution Page Protection  
Technology.  
Page: 4-9  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
HARD DISK BOOT PRIORITY:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
Hard Disk Boot Priority  
1. Ch0 M.  
2. CH2 M.  
3. CH3 M.  
4. CH2 S.  
5. CH3 S.  
: ST320014A  
Item Help  
: HDS728080PLA380  
: HDS728080PLA380  
: HDS728080PLA380  
: HDS728080PLA380  
Menu Level  
Use<Ç> or <È> to select a  
device, then press <+> to move  
it up, or <-> to move it down  
the list. Press <ESC> to exit  
this menu.  
6. Bootable Add-in Cards  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Select Hard Disk Boot Device Priority  
FIRST/SECOND/ THIRD/ OTHER BOOT DEVICE:  
The BIOS attempt to load the operating system from the devices in the  
sequence selected in these items.  
SECURITY OPTION:  
This category allows you to limit access to the system and Setup, or just to  
Setup.  
System  
The system will not boot and access to Setup will be  
denied if the correct password is not entered at the  
prompt.  
Setup  
The system will boot, but access to Setup will be  
denied if the correct password is not entered at the  
prompt.  
To disable security, select PASSWORD SETTING at Main Menu and  
then you will be asked to enter password. Do not type anything and just  
press <Enter>, it will disable security. Once the security is disabled, the  
system will boot and you can enter Setup freely.  
Page: 4-10  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
APIC MODE:  
To Enable Advanced Programmable Interrupt Controller  
MPS VERSION CONTROL FOR OS:  
This option is only valid for multiprocessor motherboards as it specifies the  
version of the Multiprocessor Specification (MPS) that the motherboard will  
use. The MPS is a specification by which PC manufacturers design and build  
Intel architecture systems with two or more processors.  
4-5. ADVANCED CHIPSET FEATURES  
Choose theADVANCED CHIPSET FEATURESfrom the main menu,  
the screen shown as below.  
Phoenix - AwardBIOS CMOS Setup Utility  
Advanced Chipset Features  
DRAM Timing Selectable  
X CAS Latency Time  
[By SPD]  
[Auto]  
Item Help  
X DRAM RAS# to CAS# Delay  
X DRAM RAS# Precharge  
X Precharge dealy (tRAS)  
System Memory Frequency  
System BIOS Cacheable  
Video BIOS Cacheable  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
[Enabled]  
[Disabled]  
[Disabled]  
Menu Level  
Memory Hole At 15M-16M  
** VGA Setting **  
PEG/Onchip VGA Control  
On-Chip Frame Buffer Size  
DVMT Mode  
DVMT/ FIXED Memory Size  
Boot Display  
[Auto]  
[8MB]  
[DVMT]  
[128 MB]  
[CRT]  
Panel Type  
TV Format  
[640x480 18-bit]  
[Auto]  
PCI SERR# NMI  
[Disabled]  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
Chipset Features Setup Screen  
Page: 4-11  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
This parameter allows you to configure the system based on the specific  
features of the installed chipset. The chipset manages bus speed and  
access to system memory resources, such as DRAM and the external cache.  
It also coordinates communications between conventional ISA bus and the  
PCI bus. It must be stated that these items should never need to be altered.  
The default settings have been chosen because they provide the best opera-  
ting conditions for the system. The only time you might consider making  
any changes would be if you discovered that data was being lost while  
using your system.  
DRAM TIMEING SELECTABLE:  
The value in this field depends on performance parameters of the installed  
memory chips (DRAM). Do not change the value from the factory setting  
unless you install new memory that has a different performance rating than  
the original DRAMs.  
CAS LATENCY TIME:  
When synchronous DRAM is installed, the number of clock cycles of CAS  
latency depends on the DRAM timing.  
DRAM RAS# TO CAS# DELAY:  
This item let you insert a timing delay between the CAS and RAS strobe  
signals, used when DRAM is written to, read from, or refreshed. Fast  
gives faster performance; and Slow gives more stable performance. This  
field applies only when synchronous DRAM is installed in the system.  
The choices are 2 and 3.  
DRAM RAS# PRECHARGE TIME:  
If an insufficient number of cycles is allowed for the RAS to accumulate its  
charge before DRAM refresh, the refresh may be incomplete and the DRAM  
may fail to retain data. Fast gives faster performance; and Slow gives more  
stable performance. This field applies only when synchronous DRAM is  
installed in the system. The choices are 2 & 3.  
PRECHARGE DEALY (tRAS):  
Precharge Delay This setting controls the precharge delay, which  
determines the timing delay for DRAM precharge  
System Memory Frequency:  
Allow to choose different frequency of memory module.  
Page: 4-12  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
SYSTEM BIOS CACHEABLE:  
Selecting Enabled allows caching of the system BIOS ROM at F0000h-  
FFFFFh, resulting in better system performance. However, if any program  
writes to this memory area, a system error may result.  
VIDEO BIOS CACHEABLE:  
Select Enabled allows caching of the video BIOS, resulting in better system  
performance. However, if any program writes to this memory area, a system  
error may result.  
MEMORY HOLE AT 15-16M:  
You can reserve this area of system memory for ISA adapter ROM. When  
this area is reserved, it cannot be cached. The user information of  
peripherals that need to use this area of system memory usually discusses their  
memory requirements  
PEG/ONCHIP VGA CONTROL:  
To select the PCI-Express Graphics or onchip VGA Graphics.  
ON-CHIP FRAME BUFFER SIZE:  
The On-Chip Frame Buffer Size can be set as 32MB. This memory is shared  
with the system memory.  
DVMT MODE:  
Intel Dynamic Video Memory Technology Mode.  
DVMT/FIXED MEMORY SIZE:  
DVMT Memory Size Select.  
BOOT DISPLAY:  
To select the boot-up display type.  
Panel Type:  
This field allows user to decide the LVDS panel resolution  
TV FORMAT:  
To select TV-Format type  
PCI SERR# NMI:  
To Enable/Disable the PCI SERR# interrupt  
Page: 4-13  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-6. INTEGRATED PERIPHERALS  
ChooseINTEGRATED PERIPHERALSfrom the main setup menu, a  
display will be shown on screen as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
Integrated Peripherals  
X OnChip IDE Device  
X Onboard Device  
X SuperIO Device  
[Press Enter]  
[Press Enter]  
[Press Enter]  
Item Help  
Menu Level  
Onboard Serial Port 3  
Onboard Serial Port 4  
WatchDog Support  
[3E8/IRQ10]  
[2E8/IRQ11]  
[Disabled]  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
Integrated Peripherals Setup Screen  
By moving the cursor to the desired selection and by pressing the <F1> key,  
the all options for the desired selection will be displayed for choice.  
If bios setup menu item supports USB device boot, it will cause Win9x detects  
the same storages twice when the system is rebooted, and USB HDD will fail.  
Note: this cause just happen under Win9x, the phenomenon is a limitation.  
Page: 4-14  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
ONCHIP IDE DEVICE:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
OnChip IDE Device  
IDE HDD Block Mode  
[Enabled]  
[Enabled]  
Item Help  
IDE DMA transfer access  
Menu Level  
OnChip Primary PCI IDE  
IDE Primary Master PIO  
IDE Primary Slave PIO  
IDE Primary Master UDMA  
IDE Primary Slave UDMA  
OnChip Secondary PCI IDE  
IDE Secondary Master PIO  
IDE Secondary Slave PIO  
IDE Secondary Master UDMA  
IDE Secondary Slave UDMA  
[Enabled]  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
[Enabled]  
[Auto]  
[Auto]  
[Auto]  
[Auto]  
If your IDE hard  
drive supports  
block mode select  
Enabled for  
automatic  
detection of the  
optional number  
of block  
read/writes per  
sector the drive  
can support.  
*** On-Chip Serial ATA Setting ***  
SATA Mode  
[IDE]  
On-Chip Serial ATA  
X PATA IDE Mode  
SATA Port  
[Auto]  
Primary  
P1, P3 is Secondary  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. IDE HDD Block Mode  
Block mode is also called block transfer, multiple commands, or  
multiple sector read/write. If your IDE hard drive supports block mode  
(most new drives do), select Enabled for automatic detection of the  
optimal number of block read/writes per sector the drive can support  
2. IDE DMA Transfer Access  
To Enable/Disable the IDE DMA transfer access  
3. OnChip Primary PCI IDE  
The integrated peripheral controller contains an IDE interface with  
support for two IDE channels. Select Enabled to activate each channel  
separately.  
4. Primary Master/Slave PIO  
Page: 4-15  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
Secondary Master/Slave PIO  
The four IDE PIO fields allow you to set a PIO mode (0-4) for each of  
the four IDE devices that the onboard IDE interface supports. Modes  
0 through 4 provide successively increased performance. In Auto  
mode, the system automatically determines the best mode for each  
device.  
5. SATA Mode:  
Set the Serial ATA configuration. When set in Advanced Host  
Controller Interface (AHCI) or RAID mode, the SATA controller is  
set to Native mode. Configuration options: [IDE] [RAID] [AHCI].  
6. Primary Master/Slave UDMA  
Secondary Master/Slave UDMA  
Ultra DMA/33 implementation is possible only if your IDE hard drive  
supports it and the operating environment includes a DMA driver  
(Windows 95 OSR2 or a third-party IDE bus master driver). If you  
hard drive and your system software both support Ultra DMA/33,  
select Auto to enable BIOS support.  
7. On-Chip Serial ATA:  
[Disabled]: Disabled SATA Controller.  
[Auto]: Auto arrange by BIOS.  
[Combined Mode]: PATA and SATA are combined. Max.of 2 IDE  
drives in each channel.  
[Enhanced Mode]: Enable both SATA and PATA. Max.of 6 IDE drives  
are supported.  
[SATA Only]: SATA is operating in legacy mode.  
8. PATA IDE Mode  
To select PATA IDE Mode sequence  
9. SATA Port  
According PATA IDE Mode to determine SATA sequence  
Page: 4-16  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
ONBOARD DEVICE:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
Onboard Device  
USB Controller  
USB 2.0 Controller  
USB Keyboard Support  
[Enabled]  
[Enabled]  
[Enabled]  
Item Help  
Menu Level  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. USB Controller  
This should be enabled if your system has a USB installed on the  
system board and you want to use it. Even when so equipped, if you  
add a higher performance controller, you will need to disable this  
feature.  
2. USB 2.0 Controller  
Enable the USB 2.0 controller  
3. USB Keyboard Support  
Select Enabled if your system contains a Universal Serial Bus (USB)  
controller and you have a USB keyboard.  
Page: 4-17  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
SUPER IO DEVICE:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
SuperIO Device  
Onboard Serial Port 1  
Onboard Serial Port 2  
UART Mode Select  
[3F8/IRQ4]  
[2F8/IRQ3]  
[Normal]  
Item Help  
TxD, RxD Polarity Active  
[Lo, Hi]  
Menu Level  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. Onboard Serial Port 1/2  
Select an address and corresponding interrupt for the first and second  
serial ports.  
2. UART Mode Select  
This item allows you to select UART mode.  
3. TxD, RxD Polarity Active  
This item allows you to determine the active of RxD, TxD  
ONBOARD SERIAL PORT 3:  
ONBOARD SERIAL PORT 4:  
Select a logical COM port name and matching address for the third and  
forth serial ports. Select an address and corresponding interrupt for third  
and forth serial port.  
WATCHDOG SUPPORT:  
To select watch-dog times.  
Page: 4-18  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-7. POWER MANAGEMENT SETUP  
ChoosePOWER MANAGEMENT SETUPoption on the main menu, a  
display will be shown on screen as below :  
Phoenix - AwardBIOS CMOS Setup Utility  
Power Management Setup  
ACPI Function  
[Enabled]  
[Yes]  
[Instant-Off]  
[Off]  
Item Help  
Video Off In Suspend  
Soft-Off by PWR-BTTN  
PWRON After PWR-Fail  
Menu Level  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
Power Management Setup Screen  
The “Power Management Setup” allows the user to configure the system to  
the most effectively save energy while operating in a manner consistent with  
your own style of computer use.  
ACPI FUNCTION:  
Users are allowed to enable or disable the Advanced Configuration and  
Power Management (ACPI).  
SOFT-OFF BY PWR-BTTN:  
Pressing the power button for more than 4 seconds forces the system to  
enter the Soft-Off state when the system has “hung”. The choices are  
Delay 4 Sec and Instant-Off.  
PWRON AFTER PWR-FAIL:  
This item allows you to select if you want to power on the system after  
power failure. The choice: Off and On  
Page: 4-19  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-8. PNP/PCI CONFIGURATION  
Choose PNP/PCI CONFIGURATIONfrom the main menu, a display  
will be shown on screen as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
PnP/PCI Configurations  
Init Display First  
Reset Configuration Data  
[PCI Slot]  
[Disabled]  
Item Help  
Menu Level  
Resources Controlled By  
x IRQ Resources  
[Auto (ESCD)]  
Press Enter  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
PNP/PCI Configuration Setup Screen  
The PNP/PCI Configuration Setup describes how to configure PCI bus system.  
PCI, also known as Personal Computer Interconnect, is a system, which  
allows I/O devices to operate at speeds nearing the speed of the CPU itself  
uses when communicating with its own special components.  
This section covers technical items, which is strongly recommended for  
experienced users only.  
INIT DISPLAY FIRST:  
This item allows you to decide to active whether PCI Slot or on-chip VGA  
first.  
RESET CONFIGURATION DATA:  
Normally, you leave this field Disabled. Select Enabled to reset Extended  
System Configuration Data (ESCD) when you exit Setup if you have  
installed a new add-on and the system configuration has caused such a  
serious conflict that the operating system cannot boot.  
RESOURCE CONTROLLED BY:  
The Award Plug and Play Bios can automatically configure all of the booth  
and Plug and Play-compatible devices. However, this capability means  
absolutely nothing unless you are using a Plug and Play operating system  
Page: 4-20  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
such as Windows 95. By choosing “manual”, you are allowed to  
configure the IRQ Resources and DMA Resources.  
IRQ RESOURCES:  
The options for these items are found in its sub menu. By pressing the  
<ENTER> key, you are prompt to enter the sub menu of the detailed options  
as shown below:  
Phoenix – Award CMOS Setup Utility  
IRQ Resources  
IRQ-3 assigned to  
IRQ-4 assigned to  
IRQ-5 assigned to  
IRQ-7 assigned to  
IRQ-9 assigned to  
IRQ-10 assigned to  
IRQ-11 assigned to  
IRQ-12 assigned to  
IRQ-14 assigned to  
IRQ-15 assigned to  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
[PCI Device]  
Item Help  
Menu Level  
Legacy ISA for devices  
compliant with the original PC  
AT bus specification, PCI/ISA  
PnP for devices compliant  
with the Plug and Play  
standard whether designed for  
PCI or ISA bus architecture  
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6:Fail-Safe Defaults  
F7:Optimized Defaults  
Descriptions on each item above are as follows:  
1. IRQ-n Assigned to:  
You may assign each system interrupt a type, depending on the type of  
device using the interrupt.  
Page: 4-21  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-9. PC HEALTH STATUS  
Choose PC HEALTH STATUSfrom the main menu, a display will  
be shown on screen as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
PC Health Status  
Shutdown Temperature  
Current CPU Temerature  
[Disabled]  
40 C  
Item Help  
Vcore  
5V  
12V  
Fan1 Speed  
Fan2 Speed  
1.36V  
5.01V  
12.35V  
0 RPM  
0 RPM  
Menu Level  
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help  
F5: Previous Values  
F6: Fail-Safe Defaults  
F7:Optimized Defaults  
PC Health Status Setup Screen  
The PC Health Status Setup allows you to select whether to choose between  
monitoring or to ignore the hardware monitoring function of your system.  
SHUTDOWN TEMPERATURE:  
This item allows you to set up the CPU shutdown Temperature.  
CURRENT CPU TEMPERATURE:  
This item shows you the current CPU temperature.  
VCORE:  
This item shows you the current system voltage.  
5V / 12V :  
Show you the voltage of5V/12V.  
FAN1/FAN2 SPEED:  
This item shows you the current CPU/ SYSTEM FAN speed.  
Page: 4-22  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-10. LOAD FAIL-SAFE DEFAULTS  
By pressing the <ENTER> key on this item, you get a confirmation dialog  
box with a message similar to the following:  
Load Fail-Safe Defaults ( Y/N ) ? N  
To use the BIOS default values, change the prompt to "Y" and press the  
<Enter > key. CMOS is loaded automatically when you power up the  
system.  
4-11. LOAD OPTIMIZED DEFAULTS  
When you press <Enter> on this category, you get a confirmation dialog  
box with a message similar to the following:  
Load Optimized Defaults ( Y/N ) ? N  
Pressing "Y" loads the default values that are factory setting for optimal  
performance system operations.  
Page: 4-23  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-12. PASSWORD SETTING  
User is allowed to set either supervisor or user password, or both of them.  
The difference is that the supervisor password can enter and change the  
options of the setup menus while the user password can enter only but do not  
have the authority to change the options of the setup menus.  
TO SET A PASSWORD  
When you select this function, the following message will appear at the  
center of the screen to assist you in creating a password.  
Enter Password:  
Type the password up to eight characters in length, and press < Enter >.  
The password typed now will clear any previously entered password from  
CMOS memory. You will be asked to confirm the password. Type the  
password again and press the < Enter > key. You may also press < Esc >  
to abort the selection and not enter a password.  
User should bear in mind that when a password is set, you will be  
asked to enter the password everything you enter CMOS setup Menu.  
TO DISABLE THE PASSWORD  
To disable the password, select this function (do not enter any key when  
you are prompt to enter a password), and press the <Enter> key and a  
message will appear at the center of the screen:  
PASSWORD DISABLED!!!  
Press any key to continue...  
Press the < Enter > key again and the password will be disabled. Once the  
password is disabled, you can enter Setup freely.  
Page: 4-24  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-13. SAVE & EXIT SETUP  
After you have completed adjusting all the settings as required, you must  
remember to save these setting into the CMOS RAM. To save the settings,  
select “SAVE & EXIT SETUP” and press <Enter>, a display will be shown  
as follows:  
Phoenix - AwardBIOS CMOS Setup Utility  
Standard CMOS Features  
Advanced BIOS Features  
Advanced Chipset Features  
Integrated Periphera
Power Management  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
word  
Save to CMOS and EXIT Y/N)? Y  
etup  
Saving  
PnP/PCI Configura  
PC Health Status  
Esc : Quit  
↑↓→← : Select Item  
F10 : Save & Exit Setup  
Save Data to CMOS  
When you confirm that you wish to save the settings, your system will be  
automatically restarted and the changes you have made will be implemented.  
You may always call up the setup program at any time to adjust any of the  
individual items by pressing the <Del> key during boot up.  
Page: 4-25  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter  
4
Award BIOS Setup  
4-14. EXIT WITHOUT SAVING  
If you wish to cancel any changes you have made, you may select the  
“EXIT WITHOUT SAVING” and the original setting stored in the CMOS  
will be retained. The screen will be shown as below:  
Phoenix - AwardBIOS CMOS Setup Utility  
Standard CMOS Features  
Advanced BIOS Features  
Advanced Chipset Features  
Integrated Periphera
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
word  
Quit Without Saving (Y/N)? N  
Power Management  
PnP/PCI Configura  
PC Health Status  
etup  
Saving  
Esc : Quit  
↑↓→← : Select Item  
F10 : Save & Exit Setup  
Abandon all Datas  
Page: 4-26  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
A
EXPANSION BUS  
This appendix indicates the pin assignments.  
Section includes:  
z Mini-PCI BUS Pin Assignment  
z Compact Flash Card Connector Pin Assignment  
Page: A-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
A
Expansion Bus  
MINI-PCI BUS CONNECTOR PIN ASSIGNMENT  
You will find a Mini-PCI connector in our PMB-531LF.  
The pin assignments are as follows:  
PIN  
1
ASSIGNMENT  
NC  
PIN  
2
ASSIGNMENT  
NC  
3
NC  
4
NC  
5
NC  
6
NC  
7
NC  
8
NC  
9
NC  
NC  
NC  
NC  
PIRQJD  
VCC3_3  
NC  
GND  
PPCLK  
GND  
PREQJ2  
VCC3_3  
AD31  
AD29  
GND  
AD27  
AD25  
NC  
C_BEJ3  
AD23  
GND  
AD21  
AD19  
GND  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
42  
44  
46  
48  
50  
52  
54  
56  
58  
60  
62  
64  
66  
68  
70  
NC  
NC  
NC  
NC  
VCC  
PIRQJC  
NC  
VCC3_3SB  
PCI_RSTJ  
VCC3_3  
PGNTJ2  
GND  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
41  
43  
45  
47  
49  
51  
53  
55  
57  
59  
61  
63  
65  
67  
69  
PMEJ  
NC  
AD30  
VCC3_3  
AD28  
AD26  
AD24  
IDSEL  
GND  
AD22  
AD20  
PAR  
AD18  
AD16  
GND  
FRAMEJ  
TRDYJ  
STOPJ  
VCC3_3  
AD17  
C_BEJ2  
IRDYJ  
VCC3_3  
NC  
SERRJ  
GND  
Page: A-2  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
A
Expansion Bus  
71  
73  
75  
77  
79  
81  
83  
85  
87  
89  
91  
93  
95  
97  
99  
101  
103  
105  
107  
109  
111  
113  
115  
117  
119  
121  
123  
PERRJ  
C_BEJ1  
AD14  
GND  
AD12  
AD10  
GND  
AD8  
AD7  
VCC3_3  
AD5  
NC  
AD3  
VCC  
AD1  
GND  
NC  
NC  
NC  
NC  
NC  
NC  
NC  
NC  
NC  
72  
74  
76  
78  
80  
82  
84  
86  
88  
90  
92  
94  
96  
DEVSELJ  
GND  
AD15  
AD13  
AD11  
GND  
AD9  
C_BEJ0  
VCC3_3  
AD6  
AD4  
AD2  
AD0  
NC  
NC  
GND  
NC  
NC  
NC  
NC  
NC  
GND  
NC  
NC  
98  
100  
102  
104  
106  
108  
110  
112  
114  
116  
118  
120  
122  
124  
NC  
NC  
NC  
NC  
NC  
Page: A-3  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
A
Expansion Bus  
COMPACT FLASH CARD CONNECTOR PIN ASSIGNMENT  
The pin assignments of Compact Flash Card connector are stated below.  
PIN ASSIGNMENT  
PIN  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
Assignment  
-CD1  
D11  
D12  
D13  
D14  
D15  
-CS1  
-VS1  
-IORD  
-IOWR  
-WE  
IRQ14  
VCC  
1
2
GND  
D03  
3
D04  
4
D05  
5
D06  
6
D07  
7
8
-CS0  
A10  
9
-ATASEL  
A09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
A08  
A07  
VCC  
A06  
A05  
A04  
A03  
A02  
A01  
A00  
D00  
D01  
D02  
-IOCS16  
-CD2  
-CSEL  
-VS2  
-RESET  
IORDY  
-INPACK  
-REG3  
-DASP  
-PDIAG  
D08  
D09  
D10  
GND  
Page: A-4  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
TECHNICAL  
SUMMARY  
B
This section introduce you the maps concisely.  
Section includes:  
z Block Diagram  
z Interrupt Map  
z RTC & CMOS RAM Map  
z Timer & DMA Channels Map  
z I / O & Memory Map  
Page: B-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
BLOCK DIAGRAM  
Page: B-2  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
INTERRUPT MAP  
IRQ  
0
ASSIGNMENT  
System TIMER  
1
2
Keyboard  
Cascade  
3
4
5
6
Serial port 2  
Serial port 1  
Available  
Floppy  
7
8
9
10  
11  
12  
13  
14  
15  
Parallel port 1  
RTC clock  
Available  
Available  
Available  
PS/2 Mouse  
Math coprocessor  
IDE1  
IDE2  
Page: B-3  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
RTC & CMOS RAM MAP  
CODE  
ASSIGNMENT  
00  
01  
02  
Seconds  
Second alarm  
Minutes  
03  
Minutes alarm  
04  
Hours  
05  
Hours alarm  
06  
Day of week  
07  
Day of month  
08  
Month  
09  
Year  
0A  
0B  
0C  
0D  
0E  
0F  
10  
Status register A  
Status register B  
Status register C  
Status register D  
Diagnostic status byte  
Shutdown byte  
Floppy Disk drive type byte  
Reserve  
11  
12  
13  
Hard Disk type byte  
Reserve  
14  
Equipment byte  
15  
16  
17  
18  
30  
31  
32  
33  
Base memory low byte  
Base memory high byte  
Extension memory low byte  
Extension memory high byte  
Reserved for extension memory low byte  
Reserved for extension memory high byte  
Date Century byte  
Information Flag  
Reserve  
34-3F  
40-7f  
Reserved for Chipset Setting Data  
Page: B-4  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
TIMER & DMA CHANNELS MAP  
Timer Channel Map :  
Timer Channel  
Assignment  
System timer interrupt  
DRAM Refresh request  
Speaker tone generator  
0
1
2
DMA Channel Map :  
DMA Channel  
Assignment  
Available  
Available  
Floppy  
Available  
Cascade  
Available  
Available  
Available  
0
1
2
3
4
5
6
7
Page: B-5  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
B
Technical Summary  
I/O & MEMORY MAP  
Memory Map :  
MEMORY MAP  
0000000-009FFFF  
ASSIGNMENT  
System memory used by DOS and  
application  
00A0000-00BFFFF  
00C0000-00DFFFF  
Display buffer memory for VGA/ EGA /  
CGA / MONOCHROME adapter  
Reserved for I/O device BIOS ROM or  
RAM buffer.  
00E0000-00EFFFF  
00F0000-00FFFFF  
0100000-FFFFFFF  
Reserved for PCI device ROM  
System BIOS ROM  
System extension memory  
I/O Map :  
I/O MAP  
000-01F  
020-021  
022-023  
040-05F  
060-06F  
070-07F  
080-09F  
0A0-0BF  
0C0-0DF  
0F0-0FF  
1F0-1F8  
278-27F  
2B0-2DF  
2F8-2FF  
360-36F  
378-37F  
3B0-3BF  
3C0-3CF  
3D0-3DF  
3F0-3F7  
3F8-3FF  
ASSIGNMENT  
DMA controller (Master)  
Interrupt controller (Master)  
Chipset controller registers I/O ports.  
Timer control regsiters.  
Keyboard interface controller (8042)  
RTC ports & CMOS I/O ports  
DMA register  
Interrupt controller (Slave)  
DMA controller (Slave)  
Math coprocessor  
Hard Disk controller  
Parallel port-2  
Graphics adapter controller  
Serial port-2  
Net work ports  
Parallel port-1  
Monochrome & Printer adapter  
EGA adapter  
CGA adapter  
Floppy disk controller  
Serial port-1  
Page: B-6  
PMB-531LF USERS MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  

iOptron Telescope 8300 2G User Manual
Jabra Headphones GN1200 User Manual
JAMO Stereo Amplifier JAV 61 User Manual
JBL Speaker System N24AWII User Manual
Jonsered Cultivator CT2105 R User Manual
JVC CRT Television AV 27430 User Manual
JVC Speaker CS V624 User Manual
Kenwood Stereo Receiver KRF V4530D User Manual
KitchenAid Refrigerator KBFL25EV User Manual
Konica Minolta Film Camera CS 200 User Manual