Integra DVD Player DPS 72 User Manual

Contents

Before Using Your DVD Player

DVD Audio/Video Player

Getting Started

Basic Playback

DPS-7.2

Instruction Manual

Advanced Playback

Thank you for purchasing the Integra DVD

Audio/Video Player.

Function Setup

Others

Please read this manual thoroughly before

making connections and plugging in the unit.

Following the instructions in this manual will

enable you to obtain optimum performance

and listening enjoyment from your new DVD

Audio/Video Player.

Please retain this manual for future reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

This unit contains a semiconductor laser system and is classified

as a “CLASS 1 LASER PRODUCT”. So, to use this model

properly, read this Instruction Manual carefully. In case of any

trouble, please contact the store where you purchased the unit.

To prevent being exposed to the laser beam, do not try to open

the enclosure.

The label on the right

is applied on the rear

panel except for USA

and Canadian

“CLASS 1 LASER

PRODUCT”

models.

CAUTION:

VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK

FAILED OR DEFEATED. DO NOT STARE INTO BEAM.

1. This unit is a CLASS 1 LASER PRODUCT and employs a

laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove

the cover. Refer servicing to qualified personnel.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR

ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

For U.S. model

For Canadian model

The laser is covered by a housing which prevents exposure during

operation or maintenance. However, this product is classified as a

Laser Product by CDRH (Center for Devices and Radiological

Health) which is a department of the Food and Drug Administration.

According to their regulations 21 CFR section 1002.30, all

manufactures who sell Laser Products must maintain records of

written communications between the manufacturer, dealers and

customers concerning radiation safety. If you have any complaints

about instructions or explanations affecting the use of this product,

please feel free to write to the address on the back page of this

manual. When you write us, please include the model number and

serial number of your unit.

NOTE: This class B digital apparatus complies with Canadian

ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modèle pour les Canadien

REMARQUE: Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

In compliance with Federal Regulations, the certification,

identification and the period of manufacture are indicated on the rear

panel.

Sur les modèles dont la fiche est polarisee:

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,

FCC INFORMATION FOR USER

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

CAUTION:

The user changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

1. Regional Restriction Codes (Region Number)

8. Notes on Handling

Regional restriction codes are built into DVD Players and DVD-

Video media for each sales region. If the regional code of the

DVD Player does not match one of the regional codes on the

DVD-Video, playback is not possible.

• When shipping the unit, use the original shipping carton and

packing materials. For maximum protection, repack the unit as

it was originally packed at the factory.

• Do not use volatile liquids, such as insect spray, near the unit.

Do not leave rubber or plastic products in contact with the unit

for a long time. They will leave marks on the finish.

The regional number can be found on the rear panel of the DVD

Player. (e.g.

for Region 1)

2. About This Manual

• The top and rear panels of the unit may become warm after

a long period of use.This is not a malfunction.

• When the unit is not in use, be sure to remove the disc and

turn off the power.

• If you do not use the unit for a long period, the unit may not

function properly in the future. Turn on and use the unit

occasionally.

This manual explains the basic procedures for operating the

DVD Player. Some DVD-Video and DVD-Audio discs do not

support the full potential of the DVD technology. Your DVD

Player may therefore not respond to all operating commands.

Refer to instruction notes on discs.

A “ ” mark may appear on the TV screen during operation. It

means that the operation is not permitted by the DVD Player or

the disc.

9. To Obtain a Clear Picture

The unit is a high technology, precision device. If the optical

pick-up lens and disc drive parts are dirty or worn down, the

picture quality becomes poor. To obtain a clear picture, we

recommend regular inspection and maintenance (cleaning or

parts replacement) every 1,000 hours of use depending on the

operating environment. For details, contact your nearest dealer.

3. Recording Copyright

Recording of copyrighted material for other than personal use is

illegal without permission of the copyright holder.

4. Power

WARNING

10. Notes on Moisture Condensation

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

Moisture condensation damages the unit.

Please read the following carefully.

The voltage of the available power supply differs according to

country or region. Be sure that the power supply voltage of the

area where the unit will be used meets the required voltage

(e.g., AC 120 V, 60 Hz) written on the rear panel.

• What is moisture condensation?

Moisture condensation occurs, for example, when you pour a

cold drink into a glass on a warm day. Drops of water form on

the outside of the glass. In the same way, moisture may

condense on the optical pick-up lens inside the unit, one of

the most crucial internal parts of the unit.

5. Do not touch the unit with wet hands

Do not handle the unit or power cord when your hands are wet

or damp. If water or any other liquid enters the case, take the

unit to an authorized service center for inspection.

• Moisture condensation occurs in the following cases.

– When you bring the unit directly from a cold place to a

warm place.

6. Location of the unit

– When you use the unit in a room where you just turned on

the heater, or a place where the cold wind from the air

conditioner directly hits the unit.

– In summer, when you use the unit in a hot and humid place

just after you move the unit from an air conditioned room.

– When you use the unit in a humid place.

• Place the unit in a well-ventilated location.

Take special care to provide plenty of ventilation on all sides of

the unit especially when it is placed in an audio rack. If

ventilation is blocked, the unit may overheat and malfunction.

• Do not expose the unit to direct sunlight or heating units as

the unit’s internal temperature may rise and shorten the life of

the pickup.

• Avoid damp and dusty places and places directly affected by

vibrations from the speakers. In particular, avoid placing the

unit on or above one of the speakers.

• Be sure the unit is placed in a horizontal position. Never place

it on its side or on a slanted surface as it may malfunction.

• When you place the unit near a TV, radio, or VCR, the

playback picture may become poor and the sound may be

distorted. In this case, place the unit away from the TV, radio,

or VCR.

• Do not use the unit when moisture condensation may

occur.

If you use the unit in such a situation, it may damage discs

and internal parts. Remove the disc, connect the power cord

of the unit to the wall outlet, turn on the unit, and leave it for

two or three hours. After a few hours, the unit will have

warmed up and evaporated any moisture. Keep the unit

connected to the wall outlet and moisture condensation will

seldom occur.

7. Care

From time to time you should wipe the front and rear panels and

the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth

in a weak solution of mild detergent and water, wring it out dry,

and wipe off the dirt. Following this, dry immediately with a clean

cloth.

Do not use rough material, thinners, alcohol or other chemical

solvents or cloths since these could damage the finish or remove

the panel lettering.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on Discs

This section shows you how to handle, clean, and store discs.

The Structure of the Disc Content

Playable Discs

This DVD Player can playback the following discs.

DVD-Video

Normally, the contents of DVD-Video are divided into titles,

and the titles are subdivided into chapters.

Disc mark

Title 2

Title 1

Chapter 1

DVD videos

DVD Audio

Chapter 1

Chapter 2

Chapter 3

DVD-Audio

The contents of DVD-Audio are divided into groups, and the

groups are subdivided into tracks.

VIDEO CDs

Audio CDs

Group 2

Group 1

Track 1 Track 2

Track 3

Video CD/CD

Video CD and CD are divided into tracks.

*¹This unit can play DVD-R discs recorded as DVD video

format.

*²This unit can play DVD-RW discs recorded as DVD video

format. DVD-RW discs that were recorded with only one-

generation copy permission cannot be played.

Track 1

Track 2

Track 4

Track 5

Track 3

*³This unit can play CD-R and CD-RW discs recorded in CD

Audio or Video CD format, or with MP3 audio files.

About VIDEO CDs

• You cannot playback discs other than those listed above.

• You cannot play discs such as CD-ROM etc., even if the

marks in the above table are labeled on those discs.

• This DVD Player uses the PAL/NTSC color system, and

cannot playback DVD videos recorded in any other color

system (SECAM, etc.).

• Avoid using heart-shaped or octagonal discs. Playing

irregularly shaped discs may damage the internal

mechanism of the DVD Player.

This DVD Player supports VIDEO CDs equipped with the PBC

(Version 2.0) function. (PBC is the abbreviation of Playback Control.)

You can enjoy two playback variations depending on the type of disc.

• VIDEO CD not equipped with PBC function (Version 1.1)

Sound and movies can be played on this DVD Player in the

same way as an audio CD.

• VIDEO CD equipped with PBC function (Version 2.0)

In addition to operation of the VIDEO CD not equipped with the

PBC function, you can enjoy playback with interactive software

and search function using the menu displayed on the TV

screen (Menu Playback). Some of the functions described in

this Instruction Manual may not work with some discs.

• Do not use discs that have residue from adhesive tape,

rental discs that have peeling labels, or discs that have

custom labels or stickers. Otherwise, you may not be able

to eject the discs or the DVD Player may become

inoperative.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on Discs

Handling Discs

MP3 compatibility information

• Do not touch the playback side of the disc.

• The CD-ROM must be ISO 9660 compatible.

• Files should be MPEG1 Audio Layer 3 format, 44.1 or

48kHz, fixed bit-rate. Incompatible files will not play and

“UNPLAYABLE MP3 FORMAT” will be displayed.

• Not compatible with variable bit-rate (VBR) files.

• This system only plays tracks that are named with the file

extension “.mp3” or “.MP3”.

Playback side

• This system is not compatible with multi-session discs. If

you try an play a multi-session disc, only the first session

will be played.

• Do not attach paper or tape to discs.

• Use CD-R or CD-RW media for recording your MP3 files.

The disc must be finalized in order to play.

• Audio encoded at 128Kbps should sound close to regular

audio CD quality. Although this system will play lower bit-

rate MP3 tracks, the sound quality becomes noticeably

worse at lower bit-rates.

Cleaning Discs

• Only the first 8 characters of folder and track names

(excluding the “.mp3” extension) are displayed.

• This system can recognize a maximum of 250 folders and

250 tracks. Discs containing more than 250 folders or tracks

will not play.

• Fingerprints and dust on the disc cause picture and sound

deterioration. Wipe the disc from the center outwards with a

soft cloth. Always keep the disc clean.

Notes on Copyright

It is forbidden by law to copy, broadcast, show, broadcast on

cable, play in public, and rent copyrighted material without

permission.

DVD videos are copy protected, and any recordings made from

these discs will be distorted.

This product incorporates copyright protection technology that is

protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright protection

technology must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

• If you cannot wipe off the dust with a soft cloth, wipe the disc

lightly with a slightly moistened soft cloth and finish with a

dry cloth.

• Do not use any type of solvent such as thinner, benzine,

commercially available cleaners or antistatic spray for vinyl

LPs. It may damage the disc.

Storing Discs

• Do not store discs in a place subject to direct sunlight or

near heat sources.

• Do not store discs in places subject to moisture and dust

such as a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing objects

on discs outside of their case may cause warping.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Important Safeguards/Precautions/Notes on Discs/Table of Contents ............. 2–7

Getting Started

Features/Supplied Accessories............................................................................. 8

Preparing the Remote Controller .......................................................................... 9

Index to Parts and Controls ................................................................................ 10

Connecting to a TV ............................................................................................. 13

Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) ...... 15

Connecting the Power/Turning on the DVD Player ............................................. 16

Setting Up the Player .......................................................................................... 17

Basic Playback

Getting Started Using Your DVD Player.............................................................. 21

Advanced Playback

Still Frame/Slow Play .......................................................................................... 25

Locating a Specific Title/Folder/Chapter/Track/Location ..................................... 26

Repeat Play ........................................................................................................ 28

Random Play ...................................................................................................... 29

Playing in a Favorite Order ................................................................................. 30

Selecting the Camera Angle ............................................................................... 34

Selecting the Audio/Subtitle Language ............................................................... 35

Continuing Playback from a Specified Location (Last Memory) ......................... 36

Memorizing Settings for Often Viewed DVDs (Condition Memory)..................... 37

Turning Off the Video Signal Output ................................................................... 38

Listening through Headphones ........................................................................... 39

Viewing Disc Information..................................................................................... 40

Function Setup

Adjusting Audio and Video Settings .................................................................... 42

Others

Pre-programming remote controller .................................................................... 61

Troubleshooting .................................................................................................. 63

Specifications ...................................................................................................... 65

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Features/Supplied Accessories

Features

THX*¹Ultra Certified

Manufactured under licence from Lucasfilm Ltd. Lucasfilm and

THX are registered trademarks of Lucasfilm Ltd.

“DTS” and “DTS Digital Surround” are trademarks of Digital

Theater Systems, Inc.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol Ÿare trademarks of Dolby

DTS*²/Dolby Digital*³/MPEG2/PCM Digital Audio Outputs

Advanced 192-kHz/24-Bit D/A Converters

Video CD Capability

54-MHz/10-bit Video D/A Conversion

Audiophile-Grade Audio Performance

Composite Outputs/Component Video Output

High Resolution On-screen Display

Full-Function Remote Control Supplied

Powerful preprogrammed remote

Direct Digital Path

THX Ultra

Before any home theatre component can be THX Ultra certified, it

must pass a rigorous series of quality and performance tests.

Only then can product feature the THX Ultra logo, which is your

guarantee that the Home Theatre products you purchase will give

you superb performance for many years to come.

Heavy-duty power cord

DVD-Rs & DVD-RWs Capability

Plays DVD-Audio discs

RS-232 interface for system control

Supplied Accessories

Make sure your box contains everything listed below.

The number of accessories is indicated in brackets.

S-video cable [1]

Remote controller (RC-451DV) [1]

Batteries (size AA/UM-3) [2]

Audio/video connection cable [1]

z cable [1]

Power cord [1]

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparing the Remote Controller

Inserting the Batteries

Using the Remote Controller

Point the remote controller toward the remote control

sensor.

Open the battery compartment cover.

Remote control sensor

30˚

Insert the two R6 (size AA) batteries.

Be sure to match the + and – ends of the batteries

with the diagram inside the battery compartment.

Notes

• Place the unit away from strong light such as direct sunlight or

inverted fluorescent light which can prevent proper operation of the

remote controller.

• Using another remote controller of the same type in the same room

or using the unit near equipment which uses infrared rays may

cause operational interference.

• Do not put any object such as a book on the remote controller. The

buttons of the remote controller may be pressed by mistake and

drain the batteries.

Close the battery compartment cover.

• Make sure the audio rack doors do not have colored glass. Placing

the unit behind such doors may prevent proper remote controller

operation.

• If there is any obstacle between the remote controller and the

remote control sensor, the remote controller will not operate.

Notes

• Do not mix new batteries with old batteries or different kinds of

batteries.

• To avoid corrosion, remove the batteries if the remote controller is

not to be used for a long time.

• Remove dead batteries immediately to avoid damage from

corrosion. If the remote controller does not operate smoothly,

replace both batteries at the same time.

• The life of the batteries supplied is about six months but this will

vary depending on usage.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index to Parts and Controls

For operational instructions, see the page indicated in brackets [ ].

I Front panel

9 0 -

Sampling Rate (kHz)

192/176.4

96/88.2

Standby/On

Open/Close

Stop

Play

Pause

48/44.1

Video Circuit

Off

Last Memory

Repeat

Clear

Top Menu

Return

Setup

Cursor

Standby

Power

Phones

Phones Level

Dimmer

Random

Display

Push to Enter

Off

Min

Max

DPS 7.2

(

)

1 Power switch and Standby indicator [16]

- Open/Close button [21, 24]

Turns on the main power supply for the DPS-7.2. The DPS-7.2

Press to open and close the disc tray.

enters standby state and the Standby indicator lights up. Pressing

the switch again to the off position (—Off) shuts down the main

power supply into the DPS-7.2.

• Before turning on the power, make sure all cables are properly

connected.

= Pause button [25, 30]

Press during playback to pause. Press again to resume playback.

~ Stop button [17, 22, 24, 30, 32, 36]

Press to stop playback. Pressing once enables playback to

resume from a point shortly before the location where it stopped.

Pressing twice causes the disc to return to the beginning of the

disc if playback starts again. Whenever a disc is loaded in the

player, indicator above Stop lights up.

! Play button [21, 23-26, 28-30, 32, 36]

Press to start or resume playback. Whenever a disc is loaded in

the player, indicator above Play lights up.

@ Dimmer button [41]

2 Standby/On button [16, 17, 21, 24, 42, 60]

When Standby/On button is pressed to On while the Power

switch is set to On, the DPS-7.2 turns on and the Standby

indicator turns off. The indicator around Open/Close button lights

up. Pressing the button again returns the DPS-7.2 to the standby

state. This state turns off the display, disables control functions.

3 Video Circuit Off button and indicator [38]

Press to switch the video signal off.

Toggle to control the lightness of the display (3 steps).

4 Last Memory button [36]

# Repeat button [28]

You can resume DVD or Video CD playback from the point you

last watched even if the disc is removed from the player. Press

Last Memory during playback to set a Last Memory point. When

you want to resume playback of that disc, press Last Memory in

the stop mode and playback starts from the memorized point.

Last Memory locations can be stored for up to 5 DVDs and 1

Video CD.

Use to set the repeat mode.

$ Random button [29]

Press to play chapters/tracks in random order.

% Remote control sensor [9]

Point the remote control toward the remote sensor to operate the

player.

^ Return button [22, 42, 55, 58]

5 Clear button [27-32, 35-37, 55]

Use to go one menu back (current settings are maintained). Use

Return when you do not want to change the option setting in a

menu.

Works in conjunction with a number of player functions. Use to

cancel repeat and random playback, and to edit programs.

6 Sampling Rate indicator [21]

When playing a disc, the appropreate Sampling Rate indicator

lights up.

7 Disc tray [21]

When loading a disc, place discs in the disc tray with the label

side facing up.

8 Top Menu button [22, 26]

& Setup button [17, 42, 60]

Press when the player is in either play or stop mode to open and

close the Setup screen.

* Display button [40, 41, 51]

Press during playback to display statistical disc information.

Press repeatedly to display different information.

( 4/¢button [22, 23]

Press to go back or advance to previous chapters/tracks. Press

and hold to perform fast-reverse/fast-forward playback scanning.

) Phones jack [39]

Press to call up the top menu programmed on the DVD.

Depending on the DVD, the top menu may be identical to the

DVD menu.

9 Cursor (2/3/5/∞) button/Enter button

[17, 21, 22, 27, 29-33, 41, 42, 50, 51, 55, 57, 58, 60]

Use 2/3/5/∞ to move through the options on menu screens and

to change settings. Use Enter to implement settings selected with

the cursor buttons or to set items highlighted in a menu.

0 Menu button [22, 27, 34, 35, 54]

This is a standard stereo jack for connecting stereo headphones.

The audio for the ANALOG OUTPUT CH 1 and CH 2 are sent to

the headphone speakers.

_ Phones Level dial [39]

Use to control the phones level. Turn the dial clockwise to

increase the phones level and counterclockwise to decrease it.

Use to display or close the DVD menu or MP3 Navigator screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

I Display

6 7

9 0

REPEAT

REMAIN

LAST

LFE

DVD- AUDIOVCD

D.MIX COND.

TITLE GROUP

CHAPTER TRACK

DTS

GUI

-=~

1 £/8indicator

8 L, C, R, LS, RS, LFE and D.MIX indicator

9 LAST indicator

0 COND. indicator

- ŸD indicator

= DTS indicator

2 Inserted disc indicator

3 TITLE/GROUP indicator

4 Angle icon indicator

5 CHAPTER/TRACK indicator

6 REPEAT indicator

~ GUI indicator

7 REMAIN indicator

! Multifunctional indicator

(e.g. operating status and error messages)

I Rear panel

3 4

RS-232

AC INLET

M^DVO^DD^AE^UL^DIN^OO^/VI.^DD^EOP^PS^L-^A7^YE.2^R

VIDEO OUTPUT

ANALOG OUTPUT

CH 2 FRONT SURR

DIGITAL OUTPUT

REMOTE

CONTROL

VIDEO

CH 1

CENTER

OPTICAL

COAXIAL

CH1

CH2

SUB

COMPONENT

S VIDEO

WOOFER

1 VIDEO OUTPUT COMPONENT CH 1/CH 2 jacks [14]

If your TV or monitor has component video inputs, you can

produce a higher quality picture on your TV or monitor by

connecting to the component video outputs on this unit.

2 RS-232 port

This port is to be used in conjunction with an external controller to

control the operation of the DPS-7.2 using an external device.

3 VIDEO OUTPUT VIDEO jack [13]

6 ANALOG OUTPUT FRONT/SURR/CENTER/

SUBWOOFER jacks [15]

Use to output 5.1 channel audio (analog) to the 5.1 channel

discrete inputs on an amplifier. If you are connecting to a receiver

that has both digital and analog input jacks for DVD player

connection, it may be beneficial to make both connections.

7 DIGITAL OUTPUT OPTICAL jack [15]

Use to output the digital audio signal recorded on discs. You can

output the digital signal via the optical output jack to an AV

amplifier or receiver.

Connect to the video input on a TV or monitor or AV amplifier or

receiver with video input capability.

4 VIDEO OUTPUT S VIDEO jack [14]

8 DIGITAL OUTPUT COAXIAL jack [15]

Use to output the digital audio signal recorded on discs. You can

output the digital signal via the coaxial output jack to an AV

amplifier or receiver.

If your TV or monitor has an S-video input, clear picture

reproduction is possible by connecting the player to your TV or

monitor via the S-Video jack.

You can switch between [S1] and [S2] S-video output from the

Setup menu.

5 ANALOG OUTPUT CH 1/CH 2 jacks [13, 14]

Use to output two-channel audio (analog) to the audio stereo

inputs on a TV or stereo amplifier.

9 z jack [15]

Use to connect this player to another component bearing the z

mark. This lets you control this unit as though it were a

component in a system.

0 AC INLET [16]

Use to connect the power cord to the wall outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index to Parts and Controls

Remote controller

- FR/FF 1/¡buttons [23]

OPEN

/CLOSE

During playback of DVD and Video CD, press ¡to perform fast

forward scanning or 1 to perform fast reverse scanning of DVD

and Video CD. When a CD or MP3 is loaded, audio scanning is

performed.

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST M COND.M DIMMER DISPLAY

TOP MENU

Number buttons (1-9, 0, +10)* [21, 22, 26, 30-32, 55, 57, 58]

Use to perform direct title/folder and chapter/track searches, and

to input numerical values.

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

(

~ RANDOM button [29]

Press to play chapters/tracks in random order.

! REPEAT button [28]

PAUSE

STOP

PLAY

)

DOWN

STEP/SLOW

Use to set the repeat mode.

@ OPEN/CLOSE 0button [21, 24]

Press to open or close the disc tray.

# SUBTITLE button [35, 54, 55]

Press repeatedly to select one of the subtitle languages

programmed on a DVD or to turn the subtitles off.

$ AUDIO button [35, 53]

FUNCTION

™

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

∞

REMOTE CONTROLLER RC 451DV

DVD TV

Press repeatedly to select one of the audio languages

programmed on a DVD.

For Video CD, CD and MP3, each press changes the audio

output as follows.

→ Stereo → 1L(Left) → 2/R(Right)

% DISPLAY button [40, 41, 51]

Press during playback to display statistical disc information.

Press repeatedly to display different information.

^ DIMMER button [41]

Toggle to control the lightness of the display.

& MENU button* [22, 27, 34, 35, 54]

Use to display or close the DVD menu or MP3 Navigator screen.

* ENTER button*

1 ON button [16, 17, 21, 42]

Press to switch the player on.

2 STANDBY button [24, 36]

Press to put the player in standby.

3 ANGLE button [34]

[17, 21, 22, 27, 29-33, 42, 50, 51, 55, 57, 58, 60]

Use to implement settings selected with the cursor buttons or to

set items highlighted in a menu.

Some DVDs are recorded with various camera angle playback

options. Press ANGLE repeatedly to display different camera

angles.

( SETUP button* [17, 42, 60]

4 LAST M button [36]

Press when the player is in either play or stop mode to open and

close the Setup screen.

) PLAY £ [21, 23-26, 28-30, 32, 36]

Press to start or resume playback.

_ UP/DOWN 4/¢[22, 23]

During playback, press 4 to go back to a previous chapter/track

and ¢to advance to the next chapter/track .

+ STEP/SLOW +/– buttons [25]

You can resume DVD or Video CD playback from the point you

last watched even if the disc is removed from the player. Press

LAST M during playback to set a Last Memory point. When you

want to resume playback of that disc, press LAST M in the stop

mode and playback starts from the memorized point. Last Memory

locations can be stored for up to 5 DVDs and 1 Video CD.

5 COND. M button [37]

You can store in memory the settings for up to 15 DVDs. Press

COND. M during DVD playback to memorize the settings.

6 TOP MENU button* [22, 26]

Press STEP/SLOW + or – during playback to view still frame.

Press and hold STEP/SLOW + or – during playback to view slow

playback. In still frame, press STEP/SLOW + to advance DVDs

and Video CDs frame by frame and STEP/SLOW – to back up a

few frames at a time (DVD only).

Press to call up the top menu programmed on the DVD.

Depending on the DVD, the top menu may be identical to the DVD

menu.

¡ FUNCTION M button [60]

7 Cursor buttons (2/3/5/∞)* [17, 21, 22, 27, 30-33, 41, 42]

Use to move through the options on menu screens and to change

settings.

CH +/–, VOL +/– buttons [61]

8 RETURN button* [22, 42, 55, 58]

You can store in memory up to 5 settings. Press FUNCTION M to

memorize and recall the settings.

™ CLEAR button [27-32, 35-37, 55]

Works in conjunction with a number of player functions. Use to

cancel repeat and random playback, and to edit programs.

£ SEARCH button [26]

Press to perform a title/folder, chapter/track or elapsed time search.

¢ PROGRAM button [27, 30-33]

Use to go one menu back (current settings are maintained). Use

RETURN when you do not want to change the option setting in a

menu.

TV/VCR button [61]

You can program titles, chapters, or tracks to play back in a

desired order. Programs can be a maximum of 24 steps.

Additionally, DVD programs for up to 24 discs can be stored in

the player’s memory for future use.

9 PAUSE 8button [25]

Press to pause playback of a disc. Press again to resume

playback.

0 STOP 7button [17, 21, 22, 30, 32, 36]

Press to stop playback. Pressing once enables playback to

resume from a point shortly before the location where it was

stopped. Pressing twice causes the disc to return to the beginning

of the disc when playback starts again.

∞ A-B button [28]

Press at the beginning and end of the section you want to repeat

or to mark a location you want to return to.

§ DVD/TV switch [61]

(Buttons indicated with * are used for menu operation.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a TV

Before connecting

Incomplete

• Refer also to the instruction manual of the TV.

• Connect the plugs securely.

• When you connect the DVD Player to the TV, be sure to turn off the

power and unplug both units from the mains before making any

connections.

• Connect the DVD Player to the TV directly. If you connect the DVD

Player to a VCR, TV/VCR combination, or video selector, the playback

picture may be distorted as DVD videos are copy protected.

Insert completely

Using the supplied audio/video connection

cable

BE sure to set the TV Aspect after connection using

the Setup Navigator explained in “Setting Up the

Player” starting on page 17 or the function setting

menu explained in “Adjusting Audio and Video

Settings” starting on page 42.

Using the supplied audio/video cable, make audio

connections from the ANALOG OUTPUT CH 1 or CH 2 L

and R jacks to the corresponding audio input jacks on the

TV. In the same manner, make video connection from the

VIDEO OUTPUT VIDEO jack to the corresponding video

input jack on the TV.

By making connections to a stereo system, you can

improve the quality of the sound. Using an audio cable (not

supplied), make audio connections from the ANALOG

OUTPUT CH 1 or CH 2 L and R jacks to the corresponding

jacks on the stereo component.

Note

Be sure to match the colors of the plugs on the cable with the

corresponding jacks on the DVD Player and the TV: yellow for

video, red for R (right) audio and white for L (left) audio.

Stereo audio/video connection cable

To audio/video input

Video

(Yellow)

L (White)

R (Red)

: Signal flow

RS-232

AC INLET

M^DVO^DD^AE^UL^DIN^OO^/VI.^DD^EOP^PS^L-^A7^YE.2^R

DIGITAL OUTPUT

VIDEO OUTPUT

ANALOG OUTPUT

CH 2 FRONT SURR CENTER

REMOTE

CONTROL

VIDEO

CH 1

OPTICAL

COAXIAL

CH1

CH2

DO NOT connect

the mains lead at

this time.

SUB

COMPONENT

WOOFER

S VIDEO

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a TV

Making component video connections

If the TV or monitor has component video inputs, making

this type of video connection will produce the ideal picture

quality for the presentation of DVD-Video. Using a

component video cable (sold separately), connect the

VIDEO OUTPUT COMPONENT CH 1 or CH 2 jacks to the

corresponding component video input jacks on the TV.

Actual labels for component video inputs may vary

depending on the TV manufacturer. (e.g. Y, R-Y, B-Y or Y,

C^B, CR)

BE sure to set the TV Aspect after connection using

the Setup Navigator explained in “Setting Up the

Player” starting on page 17 or the function setting

menu explained in “Adjusting Audio and Video

Settings” starting on page 42.

In some TVs or monitors, the color levels of the playback

picture may be reduced slightly or the tint may change. In

such a case, adjust the TV or monitor for optimum

performance.

Component video cable

To component video input

By making connections to a stereo system, you can improve

the quality of the sound. Using an audio cable (not

supplied), make audio connections from the ANALOG

OUTPUT CH 1 or CH 2 L and R jacks to the corresponding

jacks on the stereo component.

Stereo audio connection cable

To audio input

L (White)

R (Red)

: Signal flow

RS-232

AC INLET

M^DVO^DD^AE^UL^DIN^OO^/VI.^DD^EOP^PS^L-^A7^YE.2^R

DIGITAL OUTPUT

VIDEO OUTPUT

ANALOG OUTPUT

CH 2 FRONT SURR CENTER

REMOTE

CONTROL

VIDEO

CH 1

OPTICAL

COAXIAL

CH1

CH2

DO NOT connect

the mains lead at

this time.

SUB

COMPONENT

WOOFER

S VIDEO

Stereo audio connection cable

To audio input

R (Red)

Making S-video connections

If the TV or monitor has an S video input, make the S video

connection. The S video connection will provide higher

quality picture playback.

L (White)

S video connection cable

To S video input

By making connections to a stereo system, you can

improve the quality of the sound. Using an audio cable (not

supplied), make audio connections from the ANALOG

OUTPUT CH 1 or CH 2 L and R jacks to the corresponding

jacks on the stereo component.

Notes

• If you make the S video connection, leave the yellow plug

disconnected.

• If the TV audio is monaural, leave the red plug disconnected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an Amplifier

(To Enjoy the Sound Advantage of the DVD Player)

Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on pages 13 and 14, connecting

with an amplifier provides you high quality dynamic sounds.

Notes

Before connecting

• The remote controller supplied with Integra/ONKYO amplifier can

be used to operate the DVD player.

• The function of the upper and lower z connectors are the same.

Connect to either one.

• Refer to the instruction manual of the amplifier.

• When you connect the DVD Player to the amplifier, be sure to turn off

the power and unplug both units from the mains before making any

connections. Otherwise, the speakers may be damaged.

• Connect the plugs securely.

•

When using the optical input jack, remove the protective cap and

keep it safely. When the jack is not used, replace the protective cap.

Incomplete

Insert completely

Making discrete 5.1 channel ANALOG

OUTPUT connections

The discrete ANALOG OUTPUT jacks are intended to deliver

up to 5.1 channels of multi channel audio from DVD-Video and

DVD-Audio sources. Connections can be made from the

ANALOG OUTPUT FRONT, SURR (surround), CENTER, and

SUBWOOFER jacks to the corresponding input jacks on an AV

component with multi channel discrete audio input jacks.

BE sure to set the digital output setting after

connection using the Setup Navigator explained in

“Setting Up the Player” starting on page 17 or the

function setting menu explained in “Adjusting

Audio and Video Settings” starting on page 42.

Note

To ensure proper delivery of sound, be sure to match the names of

the jacks on the DVD Player and the component being connected to.

Audio connection cables

To audio inputs

FRONT L

FRONT R

SURROUND L

SURROUND R

CENTER

SUBWOOFER

An amplifier with 5.1

channel discrete input

z cable

To z jack

: Signal flow

RS-232

AC INLET

M^DVO^DD^AE^UL^DIN^OO^/VI.^DD^EOP^PS^L-^A7^YE.2^R

VIDEO OUTPUT

ANALOG OUTPUT

CH 2 FRONT SURR CENTER

DIGITAL OUTPUT

REMOTE

CONTROL

VIDEO

CH 1

OPTICAL

COAXIAL

CH1

CH2

DO NOT connect

the mains lead at

this time.

SUB

COMPONENT

WOOFER

S VIDEO

z cable

To z jack

I Making a digital connection with the

amplifier

Coaxial connection cable

To digital coaxial jack

If your amplifier has a digital input jack, be sure to connect

it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack

on the DVD player.

An amplifier with a Dolby

Digital/DTS/MPEG1/MPEG2

decoder

Optical fiber connection cable

To digital optical jack

Note

DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital

receiver) which is reserved only for video disc players.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the Power/

Turning on the DVD Player

Before connecting

• The DPS-7.2 is shipped with the main power (Power)

switch in the on position (_On). When the power cord is

plugged in for the first time, the DPS-7.2 will automatically

enter the standby state and the Standby indicator will light

(same condition after step 2 below).

• Make sure that all the connections on pages 13-15 are complete

(the connection to a TV is required).

Plug the supplied power cord into

the AC INLET and then into the

power outlet on the wall.

• Do not use a power cord other than the

one supplied with the DPS-7.2. The

power cord supplied is designed for use

with the DPS-7.2 and should not be

used with any other device.

• Never have the power cord

disconnected from the DPS-7.2 while

the other end is plugged into the wall

outlet. Doing so may cause an electric

shock. Always connect by plugging into

the wall outlet last and disconnect by

unplugging from the wall outlet first.

AC INLET

To the mains

Power

Press Power to switch on the main

power.

The DVD Player enters standby mode.

The Standby indicator lights up.

• The buttons on the remote controller do

not operate if the Power switch is set to

Off.

• To switch off the main power, press

Power again.

Standby/On

Press Standby/On on the DVD

Player or ON on the remote

controller.

The DVD Player turns on and the Standby

indicator turns off.

• To put the DVD Player in the standby

mode, press Standby/On on the DVD

Player, or STANDBY on the remote

controller. Be sure to set the volume to

minimum before putting the DVD Player

in the standby mode for the next use to

avoid sudden loud sound reproduction.

• While the Standby indicator lights up,

the DVD Player can receive signals from

the remote controller. However, if you

press Power on the DVD Player to

switch off the main power, the remote

controller cannot be used to turn on the

DVD Player.

• Setting the Standby button to standby

does not shut off the power completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST M COND.M DIMMER DISPLAY

Setting Up the Player

TOP MENU

5/∞

VOL

ENTER

SETUP

ENTER

The Setup Navigator has been designed to simplify the

process of getting the DVD player ready to perform.

Designed as a series of on-screen multiple-choice

questions, the Setup Navigator automatically sets the

audio, video, and language settings according to how

the questions are answered. Once this procedure is

complete, it will be possible to begin using the DVD

player to enjoy DVDs.

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

The procedure on this page describes the operations

necessary to function within the Setup Navigator

screens. A detailed description of the contents of each

question that appears on the screen can be found on

the following pages.

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

Using the Setup Navigator

I When setting up for the first time

Press ON (Standby/On on the front

Some DVDs start playing automatically when loaded in the

player. Because the Setup Navigator cannot be used if a disc

is playing, it is recommended to set up the player using the

Setup Navigator before loading a DVD for the first time. If a

DVD has been loaded, be sure to press 7before proceeding.

panel).

If there’s already a disc loaded and it starts

to play, press 7to stop it.

Press SETUP.

When SETUP is pressed for the first time,

SETUP

I To change the answer to a prior question

Use the cursor button (2) to return to previous screens.

Please note, however, that you cannot go forward using the

cursor button (3), so it will be necessary to answer all the

questions that occur after the screen that was returned to.

the following screen appears. Though the

Setup Navigator may be used more than

once, this screen only appears the first

time SETUP is pressed.

Audio1

V2 Language

General

A2 Video1

I To exit the Setup Navigator

Setup Navigator

Press SETUP while on any of the screens to exit the Setup

Navigator. Please note that if the Setup Navigator is exited

before all the questions are answered, no settings are

changed.

Setup Navigator

Start

Auto Start Off

Setup using the Setup Navigator

ENTER

SETUP

Move

Select

Exit

Note

On-screen information ( ) appears to clarify the functions and

explain the options available.

Use the cursor buttons (5/∞) to

make a selection.

• If you are going to use the Setup

Navigator, it is not necessary to change

the setting on the first screen. Please

proceed to the next step.

• If you do not want to set up the player

using the Setup Navigator, use the

cursor button (∞) to select [Auto Start

Off] at this time.

The Setup Navigator function may still

be used at a later time in manual Setup

screen menu operation (page 42).

Press ENTER.

The selection is entered and the next

Setup Navigator screen appears.

ENTER

Use steps 3 and 4 as a basis for entering

selections on the all of the Setup Navigator

screens described on the following pages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Up the Player

Using the Setup Navigator

I Setting the OSD Language

I Setting the type of analog audio

(On-Screen Display Language)

connections

The [OSD Language] screen establishes the OSD language,

or on-screen display language, which refers to the language

that is used by the player in menus and

The [Amp Connection] screen establishes the type of analog

audio connection you made to your amplifier/receiver.

Audio1

V2 Language

General

A2 Video1

Setup Navigator

on-screen messages. Additionally, the language that is

established at this setting will also be used for the default

audio and subtitle language.

2 ChannelDolby Digital/DTS

5.1Channel

Amp Connection

Analog Jacks

Not Connected

Audio1

V2 Language

General

A2 Video1

2channel jacks for L/R

Setup Navigator

English

français

Deutsch

ENTER

SETUP

Move

Select

Exit

Language

Settings: 2 Channel (Factory setting)

5.1Channel

Italiano

Español

OSD Language

Select the On Screen Language

Not Connected

ENTER

SETUP

Move

Select

Exit

If you select [5.1 channel] audio connection, confirm which

speakers are connected to your amplifier.

Settings: English (Factory setting)

français

Deutsch

Italiano

Español

Audio1

V2 Language

General

A2 Video1

Setup Navigator

Amp Connection

Center Speaker

PresentDolby Digital/DTS

Not Present

Notes

• The languages that can be selected may be different from those

shown above.

Center speaker is connected

to an amplifier

ENTER

SETUP

Move

Select

Exit

• In addition to setting the [OSD Language], the audio and subtitle

language are also set at this time. If you wish to change the

audio or subtitle language to a different language, make changes

in the Setup screen Language menu [Audio Language] and

[Subtitle Language] as needed (pages 53, 54).

Audio1 A2 Video1 V2 Language General

Setup Navigator

Amp Connection

Surround Speakers

PresentDolby Digital/DTS

Not Present

I Setting the TV screen size

Surround speakers are connected

to an amplifier

The [TV Type] screen establishes the size, or more

appropriately the width to height ration of your television or

monitor. The width-to-height ratio of conventional TVs is 4:3,

while the width-to-height ratio of wide screen and high-

definition TVs is 16:9. This width-to-height ratio is called the

aspect ratio.

ENTER

SETUP

Move

Select

Exit

Audio1

V2 Language

General

A2 Video1

Setup Navigator

Amp Connection

Sub–woofer

PresentDolby Digital/DTS

Not Present

Audio1

V2 Language

General

A2 Video1

Sub–woofer is connected

to an amplifier

Setup Navigator

ENTER

SETUP

Move

Select

Exit

TV Connection

TV Type

Widescreen(16:9)

Standard(4:3)

Note

If you connected the audio output directly to your TV, choose [2

Channel].

Widescreen TV

16:9 aspect raito

ENTER

SETUP

Move

Select

Exit

Settings: Widescreen (16:9) (Factory setting)

Standard (4:3)

Note

There are two screen formats that can be used to display

wide-screen format DVDs: letter box and pan & scan. When

[Standard (4:3)] is selected in the Setup Navigator, the letter box

screen format is automatically selected. To switch the preference to

the pan & scan format, make changes in the Setup screen Video 1

menu [TV Screen] setting (page 48).

Download from Www.Somanuals.com. All Manuals Search And Download.

I Setting digital audio connections to an AV

I Confirming the settings

amplifier or decoder

The [Exit Setup Navigator] is the final screen in the Setup

Navigator.

The [Digital Jack] screen establishes whether digital

connections have been made to an AV amplifier, receiver, or

external decoder. As there are numerous options available,

please refer to the instructions supplied with the component

the player is connected to determine what digital audio

formats can be decoded. If you have made no digital

connections, select [Not Connected].

Audio1

V2 Language

General

A2 Video1

Setup Navigator

Save Changes

Exit Setup Navigator

Changes are saved

Move

Delete Changes

Start Again

ENTER

SETUP

Select

Exit

Audio1

V2 Language

General

A2 Video1

Setup Navigator

Dolby Digital

Settings: Save Changes (Factory setting)

Select to have the player make all of the necessary

audio, video and language settings according to

your responses in the Setup Navigator.

Dolby Digital/DTS

Dolby Digital/MPEG

Dolby D/DTS/MPEG

PCM

Amp Connection

Digital Jack

Not Connected

Compatible with Dolby Digital

Delete Changes

ENTER

SETUP

Move

Select

Exit

Select to exit the Setup Navigator without changing

any of the system settings.

Settings: Dolby Digital (Factory setting)

Dolby Digital/DTS

Dolby Digital/MPEG

Dolby D/DTS/MPEG

PCM

Start Again

Select to return to the [OSD Language] screen of

the Setup Navigator and do the settings again.

Not Connected

I To change other player settings in the Setup

screen menus

The procedure for changing the settings in the Setup screen

menus is described on page 42.

Warning

• Do not set [Digital Jack] to [Dolby Digital/DTS] or [Dolby D/DTS/

MPEG] if the amplifier does not have a DTS decoder. If you do

so, high volume sound may be output and damage your hearing

as well as speakers.

• Select [PCM] when you connect the player to a 2 channel digital

stereo amplifier. If you select other than [PCM], high volume

sound may be output and damage your hearing as well as

speakers.

I Setting compatibility with 96 kHz output

The [96 kHz PCM Audio] screen establishes whether or not

the AV component the player is connected to is capable of

processing an audio signal with a sampling rate of 96 kHz.

This screen only appears if connections have been made to

an external AV component as determined in previous screens.

Audio1

V2 Language

General

A2 Video1

Setup Navigator

Amp Connection

96kHz PCM Audio

Yes

Don't Know

Digital jack not compatible with 96kHz

ENTER

SETUP

Move

Select

Exit

Settings: No (Factory setting)

Select if the connected AV component cannot

process an audio signal with a sampling rate of 96

kHz.

Yes

Select if the connected AV component can process

an audio signal with a sampling rate of 96 kHz.

Don’t Know

Select if you are uncertain whether the connected

AV component can process an audio signal with a

sampling rate of 96 kHz.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Up the Player

Various sound formats and sound effects

Minimum speaker configuration for

DTS/Dolby Digital/MPEG2 surround sounds

Center Speaker

Left front

speaker

Right

front

speaker

Left

surround

speaker

Right surround

speaker

The 5.1-channel digital surround format of DOLBY DIGITAL/

DTS/MPEG2 enables you to individually play five full-range

(20 Hz-20 kHz) channels (left and right front, center, two

surround channels) plus an LFE (Low Frequency Effect)

channel for the low-range effect sound. It will create a realistic

sound as heard in theaters and concert halls.

DOLBY DIGITAL Surround

DVD Video that have the

system.

mark are recorded using this

mark are recorded using

DTS Surround

DVD Video and CD that have the

system.

MPEG2

DVD Video that have the

this system. MPEG2 may have 8 channels. In this case, left and right

center speakers in addition to the above speaker configuration are

used.

DOLBY PRO LOGIC Surround

This surround format consists of 4 channels (left and right front,

center, and monaural surround channel) and emphasizes the center

channel. This format is very effective for panning music,

conversation, and three-dimensional sound movement output from

three front channels. It also simulates the atmosphere and surround

effects of the sound reflected from the side and rear walls of the

theater.

DVD Video that have the

this system.

mark are recorded using

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

Getting Started Using Your

DVD Player

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

VOL

ENTER

2/3/5/∞

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

Warning

Before you can start to enjoy the digital audio and video

on DVDs, be sure that you have either performed the

Setup Navigator procedure described in the previous

section or made the necessary settings in the Setup

screen menus as outlined in the next section to set up

the player to correspond to your home system. Having

made these settings, you are now ready to start using

the player to enjoy DVDs, Video CDs, CDs and MP3s.

DOWN

If the DVD Player is connected to the

TV or amplifier through the analog

audio jacks, do not play DTS-

encoded discs. Excessive noise may

be output from the analog stereo

jacks, which may damage the

connected equipment.

To reproduce DTS surround sounds,

digital connection to an amplifier with

a DTS decoder is needed.

STEP/SLOW

FUNCTION

Number

buttons

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

VCD

MP3

Playing DVDs, Video CDs, CDs and MP3s

Press ON (Standby/On on the front

panel).

Select the item you want to view.

• When a DVD is loaded:

Select the item with the cursor buttons

(2/3/5/∞) or the number buttons then

press ENTER.

OPEN

/CLOSE

Press 0.

The disc tray comes out.

• When a Video CD is loaded:

ENTER

Use the number buttons to select the

item.

Load a disc.

Load a disc with the label side facing up,

using the disc tray guide to align the disc.

Notes

• Noise is output if you make digital audio connections to a

receiver or amplifier that does not have a built-in decoder. Check

that the digital audio output format selected in the

Audio menu corresponds to the audio components you have

made connections to (pages 19, 44, 45).

• The TV screen size is factory set to present the wide screen

format (16:9 aspect ratio). If you have a standard TV screen (4:3

aspect ratio), this setting can be changed to match your TV

screen size in the Video 1 menu (pages 18, 48).

• Do not move the DVD Player during playback. Doing so may

damage the disc.

• Use 0 on the remote controller or DVD Player to open and close

the disc tray. Do not touch the disc tray while it is moving. Doing

so may cause the DVD Player to malfunction.

PLAY

Press £.

• The disc tray closes, and playback

begins.

• The appropriate audio sampling rate

indicator lights.

• MP3 only: It may take a few seconds for

the player to locate the track on the

disc, depending on the complexity of

the file structure. During this time,

“Please wait a moment” is displayed.

• Do not press down on the disc tray or put any objects other than

playable discs on the disc tray. Doing so may cause the DVD

Player to malfunction.

• In many instances, a menu screen appears when playback of a

movie is complete. Prolonged display of an on-screen menu may

damage your television set, permanently etching that image onto

its screen. To avoid this, be sure to press 7once the movie is

complete.

• Depending on the disc, a menu may be

displayed. If a menu is displayed,

proceed to step 5.

VCD

MP3

DVD

DVD-A

DVD-V

I When an operation is prohibited

I About the

and

marks in the pages related to disc operation

means the function or title is related to both DVD-Video and

DVD-Audio operation.

means the function or title is related to DVD-Video operation.

means the function or title is related to DVD-Audio operation.

means the function or title is related to Video CD operation.

means the function or title is related to audio CD operation.

means the function or title is related to MP3 operation.

There are times when you are using the player and attempt to

perform an operation, but for some reason it cannot be

performed. When this occurs, one of the two following icons

appears on the screen.

DVD

DVD-V

DVD-A

VCD

The operation is prohibited by the player.

The operation is prohibited by the programming on the

disc.

MP3

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started Using Your DVD Player

DVD

VCD

When a Menu Screen is Displayed

To Open or Return To the DVD or Video

CD Menu Screen

Although this differs depending on the disc, pressing MENU,

TOP MENU, or RETURN during DVD playback or RETURN

during Video CD playback displays the menu screen. Refer to

the DVD or Video CD disc jacket and accompanying

documentation for more information.

Menu screens are displayed for DVDs that have menu

screens or Video CDs that include Playback Control (PBC).

DVDs often contain extra information that can be accessed in

the DVD menu and sometimes makes navigating DVD menu

screens as enjoyable as watching the feature presentation.

Example: When a DVD that has menu screens is loaded

I To play Video CDs without displaying menu

1 Highlight Clips

2 Chapter List

screens

3 Commercial Header

4 Subtitles

5 Soundtrack

Video CDs with Playback Control (PBC) display a menu

screen when play is started. It is possible, however, to play

back Video CDs without displaying menu screens.

When a Video CD with PBC is loaded, press 7, and then the

number button of the track you want to play.

6 Start Main Feature

Example: When a Video CD that has Playback Control is

loaded

STANDARD VOCAL BEST

Don't Tekno for an Answer

Bad Whack Naff Riff

dubmyheadbassman

Gooey Love Jingle

Praise the Day

Bertie B.& the Goans

Hood in the Boyz

Sleek Machine

Philip William

Formerly an Artist

Pfeuti

G3, Ba-san

Abstract Jazz Phunk

Rock the Love Jive

John Torn

Hot Monkey Stick

I To navigate a menu screen

• Although individual DVD titles may differ, when a menu

screen is displayed, use the cursor buttons (2/3/5/∞) and

ENTER on the remote control. The cursor buttons are used

to move around the options on the screen and ENTER is

used for selection.

• Occasionally, the number buttons may also be used to

make selections. If this is possible, using number buttons

serves to directly select an option on a menu screen. Only

number buttons are used to make selections on Video CD

menu screens.

• When the Video CD has more than one menu, pages can

be advanced to or returned to with 4or ¢.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

ENTER

TOP MENU

2/3/5/∞

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

RETURN

PAUSE

STOP

PLAY

4/¢

DOWN

1/¡

STEP/SLOW

FUNCTION

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

VCD

MP3

VCD

MP3

Chapter (Track) Skip Forward/Skip

Back

Forward and Reverse Scanning

Fast forward and reverse scanning

Advancing to the next chapter (track)

Press and hold ¡or 1during

playback to scan forwards or

backwards.

While “¡1” or “11” is displayed on-

screen blinking, release the button to

resume normal playback.

Press ¢.

Press to skip forward to the next chapter

(track).

Skipping back to the previous chapter

(track)

DOWN

Variable speed scanning

Press 4.

• Press once to skip back to the start of

1 Press (but don’t hold) ¡or 1

during playback to start scanning.

the chapter (track) currently playing.

“¡1” or “11” appears on screen.

• Press twice to skip back to the start of

2 Depending on the type of disc

playing, you can increase the

scanning speed by pressing ¡

or 1.

the previous chapter (track).

The scan speed is shown on-screen.

DVD-Video discs have three scanning

speeds;

1, 2 and 3.

DVD-Audio discs have two scanning

speeds;

2 and 3.

CD and Video CDs have two scanning

speeds;

1 and 2.

MP3 have only one scanning speed.

3 Press £to resume normal

playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

Getting Started Using Your DVD Player

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

VCD

MP3

DVD-V

Resuming playback from where you

stopped

Stopping Playback and Switching

Power Off

Use the resume feature to restart playback from the point that

the disc was stopped last time.

This features cannot be used with DVD Audio discs, MP3s

and CDs.

STOP

Press 7.

Playback stops.

STOP

Press 7once.

OPEN

The display shows “RESUME” and the

stop position is memorized.

/CLOSE

Press 0.

The disc tray comes out.

• The resume position remains

memorized as long as the disc is in the

player — even if you switch the power

off.

Remove the disc.

• Pressing 7twice causes the disc to

return to the beginning when £is

pressed again. The display shows the

disc type (DVDs or Video CDs).

PLAY

Press £.

Playback starts from the resume position.

STANDBY

Press STANDBY (Standby/On on

the front panel ).

The disc tray goes back in.

Notes

• The actual restart position may be slightly before or after the

resume position.

• If you want to remove the disc, but still want to resume playback

from the last stopped position, use the LAST MEMORY feature

instead (page 36).

• The memorized resume position is erased when you open the

disc tray, or change the Parental Lock Level setting (page 57) or

On-screen Display (OSD) setting (page 53).

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

Still Frame/Slow Play

The video images on DVD and Video CD can be viewed

as a still frame, played back at slow speeds and even

advanced frame by frame.

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

STEP/SLOW +/–

FUNCTION

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

VCD

Viewing a still frame

Viewing slow playback

You can’t use slow reverse play with Video CDs.

PAUSE

Press 8, STEP/SLOW +/–.

When viewing a DVD, if the paused picture

shakes, select the [Field] setting in the

Setup screen Video 1 menu [Still Picture]

setting as described in the section on page

52.

STEP/SLOW

During still frame playback, press

and hold STEP/SLOW +/– during

playback.

STEP/SLOW

Press STEP/SLOW +/– repeatedly to

change the slow-motion speed.

There are four forward slow-motion play

speeds:

STEP/SLOW

I Frame by frame advance playback:Viewing

one frame at a time

31/16

31/8

You can’t use frame review with Video CDs.

1/2 2

1/4 2

1 Press 8, STEP/SLOW +/–.

2 Press STEP/SLOW +/–.

There are two reverse slow-motion play

speeds:

STEP/SLOW +: The picture advances one frame each

Slow 1 ↔ Slow 2

time the button is pressed.

STEP/SLOW –: The picture backs up a DVD a few frames each

time the button is pressed.

I To return to normal playback

When viewing a slow playback, pressing £restores normal

playback operation.

I To control still pictures

DVD-Audio may inclide still pictures, which are classfied into two

large groups.

Slideshow:

Still pictures appear on after another

automatically consistent with the disc program.

Browsable pictures: You can display your favorite still picture

selected with the buttons on the remote control.

Press STEP/SLOW +/– to select a picture. (The order of

pictures vary depending on the disc.)

I To return to normal playback

When viewing a still frame playback, pressing 8or £restores

normal playback operation.

Notes

• There is no sound when viewing still frames or slow playback, or

when advancing one frame at a time.

• Still frame, slow play, or frame advance playback may not be

possible with certain titles. In this case, the

mark is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Locating a Specific Title/Group/Folder/

Chapter/Track/Location

DVD

VCD

MP3

Searching for a Title, Group, Folder, Chapter,Track, or Location on a Disc

This player offers different ways of accessing the information

on a DVD, Video CD, CD or MP3. Using SEARCH, you can

search for titles or chapters on a DVD-Video, groups or tracks

on a DVD-Audio, tracks on a Video CD, CD or folders or

tracks on a MP3 and even select the point in time to start

playback.

PLAY

Press £.

Playback of the selected title, folder,

chapter or track starts. When a time search

is performed, playback begins at the

appointed time.

Press SEARCH repeatedly to select

the type of search.

Notes

The type of search changes which each

press as follows.

DVD-Video

• For some discs, selection can be made using the top menu on the

DVD. In this case, press TOP MENU to display the menu screen

and then make your selection.

• With some DVDs, the search operation may not be possible and

may stop shortly after being performed. In this case, the

is displayed.

3Title

3Chapter

Time 2

mark

Off 2

• Time search is not possible with DVD-Audio, CDs and MP3s.

• When performing DVD or Video CD time search, playback may

start from a slightly different time than that specified.

• Time search is not possible during when the disc is stopped.

• Search using time search is not possible during PBC playback of

Video CDs.

DVD-Audio

3Group

3Track

Page* 2

Off 2

Video CD

3Track

3Time

Off 2

I To perform a direct title or chapter/track

search using the number buttons

• Press the number buttons while the disc is stopped to

select a title or track number.

• Press the number buttons while the disc is playing to select

a chapter or track number.

3Track

3Off

MP3

3Folder

3Track

Off 2

• To select number 3, press 3.

• To select number 10, press 1 and 0.

• To select number 37, press +10, +10, +10 and 7.

* DVD-Audio discs with brousable

pictures only.

I Playing bonus groups of DVD-Audio

Press the number button(s) of the

desired title, group, chapter or track

or of the specific time where you

would like to begin playback.

Some DVD-Audio may include an extra content called “Bonus

Group”.

If you select it to play, a display appears to enter a key

number. Press the number buttons on the remote control to

enter the key number.

When the number is entered correctly, playback of the bonus

group starts.

To get key numbers, refer to instruction note of discs.

• To select number 3, press 3.

• To select number 10, press 1 and 0.

• To select number 87, press 8 and 7.

When performing a time search:

Note

• A key number may be called in some cases such as when

removing the disc. Enter the key number again if necessary.

• When you use a bonus group in a programmed play such as

memory playback, enter the key number beforehand.

• To select 21 minutes, 43 seconds,

press 2, 1, 4, and 3.

• To select 1 hour, 14 minutes, press 7, 4,

0, and 0.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

ENTER

TOP MENU

2/3/5/∞

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

Number

buttons

SEARCH CLEAR

CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

MP3

Using the MP3 Navigator

Use the MP3 Navigator to make searching for the track(s) you

want to play easier. You can also use it to add or clear tracks

from the program list.

I Navigate using the following controls:

Cursor buttons (2/3) Select folder and tracks from the

current screen.

Cursor buttons (5/∞) Select the previous/next of folders

and tracks. To move rapidly up or

down a long list of folders or tracks,

press and hold the Cursor buttons

(5/∞).

Load a CD-ROM containing MP3

tracks.

Press MENU to enter the MP3

Navigator screen.

The left side of the screen shows a list of

folders containing MP3 tracks.

Total number of Track

ENTER

Play the currently selected folder or

track. MP3 tracks that are unplayable

on this system are automatically

skipped and the display shows

“UNPLAYABLE MP3 FORMAT”.

MP3 Navigator

Current :

1-1

Folder

Track

1.TRACK1~1

2.TRACK2~2

3.TRACK3~3

4.TRACK4~4

1.FOLDER~1

2.FOLDER~2

3.FOLDER~3

4.FOLDER~4

5.FOLDER~5

6.FOLDER~6

Exit the MP3 Navigator

PROGRAM

Add the currently selected track to

the program list. (Tracks in the

program list are marked .)

Pressing PROGRAM repeatedly will

add the track to the program list

repeatedly.

ENTER

Play

Exit

Total number of Folder

If you display the MP3 Navigator when a

disc is playing, the currently playing folder

and track numbers are shown at the top

left of the screen.

See ‘Programming MP3s’ on page 31

for how to use program play.

CLEAR

Clear the currently selected track

from the program list.

On the right side is a list of MP3 tracks

from the first title in the list.

MP3 Navigator

1~4

Current :

1~10

1-1

Folder

Track

1.FOLDER~1

2.FOLDER~2

3.FOLDER~3

4.FOLDER~4

5.FOLDER~5

6.FOLDER~6

1.TRACK1~1

2.TRACK2~2

3.TRACK3~3

4.TRACK4~4

CLEAR

ENTER

Del PGM

Play

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

Repeat Play

You can repeat an entire title, group, folder, chapter or

track, or just a part.

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

CLEAR

A-B

RANDOM REPEAT

PROGRAM

REPEAT

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

VCD

MP3

VCD

Repeating aTitle, Group, Folder,

Chapter or Track

Repeating a Specific Segment

A B

Repeat play of a specified section

REPEAT

Repeat play of a chapter/track

Press A–B at the beginning and end

of the section you want to repeat.

Press REPEAT once during

playback of the chapter or track you

want to repeat.

• When A–B is pressed a second time,

the disc returns to the location where A–

B was pressed first and plays the

selected section repeatedly.

Repeat play of a title/group/folder

Press REPEAT twice during

playback of the title you want to

repeat.

• You can only perform A–B repeat within

the same title, chapter, or track.

Return to a specified location on a disc

Repeat play of a disc

1 Press A–B at the desired

VCD

location.

Press REPEAT twice during

playback of the disc you want to

repeat.

2 When you want to return to the

specified location, press £.

MP3

Press REPEAT three times during

playback of the disc you want to

repeat.

I To cancel A–B repeat play

Press CLEAR. Playback continues, but the repeat function is

canceled.

I To clear the specified location

Press CLEAR to cancel repeat play or to clear the specified

I To repeat a program

Press REPEAT once during program playback to repeat the

program.

location that was set using A–B.

Notes

• With some DVD discs, there may be times when repeat playback

I To cancel repeat play

Press CLEAR. Playback continues, but the repeat function is

canceled.

is not possible. In these cases, the

screen.

mark will appear on the

• With Video CDs, repeat play is not possible when the menu is

displayed (PBC playback). To perform repeat play, start playback

without displaying a menu by pressing the track number to be

repeated when the disc is stopped, and then press REPEAT.

• You cannot use A-B repeat when listening to an MP3.

• If you switch camera angle during repeat play, repeat play is

cancelled

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

Random Play

Play titles, groups, chapters, or tracks on a disc in

random order.

ENTER

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

4/¢

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

CLEAR

RANDOM REPEAT

PROGRAM

REPEAT

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

VCD

MP3

Playing in Random Order

I To change titles, chapters, or tracks during

RANDOM

Random playback of chapters within

one title or tracks within one group

random play

• Press ¢or RANDOM and the next randomly selected

title, chapter, or track starts playing.

• Press 4and playback of the current title, chapter, or track

starts again from the beginning.

Press RANDOM once.

“Random Chapter” appears on the screen,

and chapters within the title will be played

back in random order.

I To stop random play

Random playback of titles or groups

Press CLEAR. This returns you to normal playback of

chapters/tracks in order from the chapter/track currently

playing.

Press RANDOM twice.

“Random Title” appears on the screen, and

titles will be played back in random order.

Notes

Random playback of tracks

• With Video CDs, random play is not possible during playback

when the menu is displayed (PBC playback). To perform random

play, start playback without displaying a menu by pressing a track

number button while in the stop mode, and then press RANDOM.

• Random play of programmed chapters/tracks is not possible.

• In the case of DVDs, random playback may not be possible with

some discs.

Press RANDOM.

“Random” appears on the screen, and

random playback begins.

• Repeat playback of random playback is not possible. In these

cases, the

mark will appear on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing in a Favorite Order

You can combine your favorite titles, groups, folders,

chapters or tracks and play them in any order.

DVD

Programming DVDs

A program with a maximum of 24 steps can be memorized.

I To program a pause in a program

Press 8instead of a number button.

PROGRAM

Press PROGRAM.

“8” appears on the screen and the pause can be programmed.

A pause cannot be programmed as the first or last position in a

program, and two or more pauses cannot be programmed in

succession.

The Program screen appears.

Program Chapter

Program Title

Program Chapter

Program Title

Title

Chapter

Title

2(/20)

Current:

Title

Current:

(Chapter 1~18)

I To delete a number:

Use the cursor buttons (5/∞/2/3) to highlight the incorrect

Program Memory Off

ENTER

Program Memory Off

ENTER

PROGRAM

Play

^PROGRAMExit

Move

Play

Exit

number and then press CLEAR.

The number is deleted. If the number was before another number,

the later numbers are reordered automatically.

Use the cursor buttons (2/3) to

select either [Program Chapter] or

[Program Title].

I To insert a number:

Use the cursor buttons (5/∞/2/3) to highlight the number to

be placed after the new number and then press the number

button(s) of the number to be inserted.

Once the program type is selected.

Use the cursor button (∞) to enter

the program window.

The new number is inserted before the previously selected number.

When [Program Chapter] is selected, you

must also select what title the chapters to

be programmed are in. Use the cursor

button (5) to highlight “Title” and then use

the number buttons to enter the title

number to be used.

I To stop program play

Press 7.

Notes

• When programming chapters, chapters not programmed may

appear on the screen. This is not a malfunction.

• Programming may not be possible with certain DVD discs. On

these types of discs, the

programming is attempted.

• Only chapters within the same title can be programmed during

chapter programming.

• You cannot program while menu or top menu is displayed.

mark will appear on the screen when

In the program window, use the

number buttons to enter the

numbers of the titles or chapters in

the order you want to program them

in.

• To program DVD titles/chapters 9, 7,

and 18 in order, press 9, 7, +10 and 8.

Program Chapter

Program Title

Program Chapter

Program Title

Title

Chapter

Title

2(/20)

Current:

Title

Current:

(Chapter 1~18)

Program Memory Off

ENTER

Program Memory Off

Move

PROGRAM

Exit

ENTER

PROGRAM

Move

Play

Exit

ENTER

Press ENTER or £.

• Playback starts in the set order.

• Press PROGRAM to return to the

previous display. The program will not

begin until £is pressed.

PLAY

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY

ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

VOL

ENTER

2/3/5/∞

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

Number

buttons

SEARCH CLEAR

CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

MP3

Programming MP3s

A program with a maximum of 24 steps can be memorized.

I Navigate using the following controls:

Cursor button

CLEAR

Navigate the program list.

PROGRAM

Press PROGRAM to enter the [MP3

Clear the currently selected item in the

program list.

Program] screen.

If you added tracks to the program list from

the ‘Using the MP3 navigator’ on page 27,

the tracks are displayed here.

ENTER

Start playing the program list.

Exit the [MP3 Program] screen.

PROGRAM

Total number of folder and track

Folder name

Track name

MP3 Program

Folder : 001~25

– – – – – – – – : – – – – – – – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

ENTER

PROGRAM

Exit

Move

Play

From this screen you can enter folder and

track numbers directly to build up a

program list.

Use the number buttons to enter a

three-digit folder number.

The number of folders on the disc is

displayed in the top-left of the screen.

Once you’ve entered a valid folder number,

the name of the folder appears.

MP3 Program

Track 001~10

FOLDER1~ : – – – – – – – –

001:– – –

– – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

ENTER

PROGRAM

Exit

Move

Play

Use the number buttons to enter a

three-digit track number.

The number of tracks in the current folder

is displayed in the top-left of the screen.

Once you’ve entered a valid track number,

the name of the track appears.

MP3 Program

Folder 001~25 – – – – – – – – : – – – – – – – –

001:008

– – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

ENTER

PROGRAM

Exit

Move

Play

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing in a Favorite Order

DVD

VCD

MP3

Programming Video CDs, CDs

Additional programming options

A program with a maximum of 24 steps can be memorized.

After you have made a program, it is then possible to confirm,

add, or clear the contents of the program.

PROGRAM

Press PROGRAM.

The program screen appears. When a

Video CD or CD is loaded, the cursor

appears in the program window.

Program Track

I To confirm the contents of a program:

On a CD or Video CD track program, press PROGRAM to

confirm.

The program screen displays the current program.

On a DVD, select the program type (title, group, chapter or

track) with the cursor buttons (2/3).

1(/10)

0.00

Track

Current:

Total Time

The current DVD title, group, chapter or track program can then be

confirmed on the appropriate program screen.

I To add to a program:

1 Press PROGRAM.

ENTER

PROGRAM

Exit

Move

Play

2 Press a number button to add a new title, group, chapter, or

track at the end of the program.

3 Press PROGRAM to exit the program screen.

Use the number buttons to enter the

numbers of the tracks in the order

you want to program them in.

• To program tracks 9, 7, and 18 in order,

press 9, 7, +10 and 8.

I To delete a program:

1 Press PROGRAM.

2 Select the program with the cursor buttons (2/3), then

press CLEAR.

3 Press PROGRAM to exit the program screen.

• To edit the program, refer to the

procedures on the previous page.

Notes

Press ENTER or £.

• Playback starts in the specified track

ENTER

• The complete program will be deleted even if the disc tray is open

or power off (standby).

• Pressing CLEAR when the disc is stopped will clear all programs.

order.

• To stop the program play, press 7.

PLAY

Notes

• To program a pause, or to add or delete a number, refer to the

procedures for ‘Programming DVDs’ on page 30.

• You cannot program when playing a Video CD using menu

selections (during PBC).

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

VOL

ENTER

2/3/5/∞

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

Number

buttons

SEARCH CLEAR

CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

I To add a title/group/chapter/track to a

I To save a program in memory

program

This player can memorize the programs on up to 24 DVD-Video

discs. By turning the [Program Memory] to [On], the player will save

your program and recall it the next time you use the same DVD.

When the program memory exceeds 24, programs will be erased in

chronological order from the oldest program in memory.

1 Use the cursor button (∞) to highlight [Program Memory]

and use the cursor button (3) to select [On].

Press and hold PROGRAM for about 2 seconds.

The current title/group/chapter/track number appears on-screen

together with the program step number. If there isn’t already a

program then a new one will be created.

Chapter 07 3Program 03

Program Chapter

Program Title

Title

Chapter

Current:

Title

(Chapter 1~18)

Program Memory On

Off

Move

ENTER

PROGRAM

Exit

Select

I To confirm the contents of a program:

Press PROGRAM.

2 Press ENTER.

The program is saved in memory.

Notes

Note

• When using this function to program DVDs, the program being

created corresponds to the Program screen (chapter or title) that

appears when PROGRAM is pressed. Be sure to check that the

appropriate program type is selected.

When a DVD with a program stored in memory is loaded, program

playback may start automatically.

I To erase a program saved in memory

• You cannot make a program containing chapters in different titles.

The player erases programs in chronological order when the

maximum number of programs that can be held in memory is

exceeded. To prevent the player from erasing older programs that

you may still use regularly, or when you don’t want to use a program

anymore, it is possible to manually erase programs stored in

memory.

1 Load a DVD that has a program stored in memory.

2 Press PROGRAM.

The program screen appears.

3 Use the cursor button (∞) to highlight [Program Memory]

and use the cursor buttons (3/∞) to select [Off].

4 Press ENTER.

The program is cleared from memory.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

ANGLE

TOP MENU

Selecting the Camera Angle

You can select a camera angle when viewing DVDs with

the multi-angle option.

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD-V

Viewing from a Desired Camera Angle (Multi-Angle)

I To check whether or not a disc is recorded

ANGLE

Press ANGLE during playback.

The camera angle changes each time you

press the button.

with angles

The jacket of discs that are recorded with angles will be marked with

. When locations on discs that are recorded with angles are

played back, the

indicator can be displayed.

Angle

: 1/4

Angle

: 2/4

To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup

screen Video menu (page 52).

Angle

: 4/4

Angle

: 3/4

Notes

• You can use the Multi-Angle function only with discs featuring

recordings of images shot from different camera angles.

• During Multi-Angle playback, the

indicator in the display

lights.

• For some discs, selection can be made using the DVD menu. In

this case, press MENU to display the DVD menu screen and then

make your selection.

• If you change the camera angle during still playback, the DVD

player resumes normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

Selecting the Audio/

Subtitle Language

STANDBY ANGLE

AUDIO SUBTITLE

SUBTITLE

AUDIO

LAST

COND.M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD-V

Changing the Audio Language

(Multi-Language Function)

Selecting a Subtitle Language

(Multi-Language Subtitles)

Dolby Digital, PCM, and other audio data can be recorded on

DVDs in a number of languages or audio tracks, letting you

choose the desired language or audio.

You can select a desired subtitle language with DVDs that

have subtitle data in multiple languages recorded on them.

SUBTITLE

Press SUBTITLE repeatedly during

playback.

AUDIO

Press AUDIO repeatedly to select

the desired language.

Pressing AUDIO once displays the

currently selected language. Subsequent

presses rotates through the audio

languages available on the DVD.

Pressing SUBTITLE once displays the

currently selected subtitle language.

Subsequent presses rotates through the

subtitle languages available on the DVD.

Subtitle :1 English

Subtitle :2 Spanish

Dolby Digital

5.1CH

Dolby Digital

5.1CH

: 2 Spanish

Audio

: 1 English

Audio

HELLO!

HOLA!

Notes

• The subtitle language cannot be switched if the subtitle language

is not recorded, or if only one language is recorded.

• Switching the subtitle language may not be possible with some

discs. In this case, the

• To clear subtitles during playback, press SUBTITLE and then

press CLEAR, or press SUBTITLE until [Off] appears.

• For some discs, subtitle language selection can be made using

the menu on the DVD. In this case, press MENU to display the

DVD menu screen and then make your selection.

• You cannot switch languages if there is only one language

recorded on the disc.

• Switching the audio language may not be possible with some

titles. In this case, the

• For some titles, selection can be made using the DVD menu.

In these cases, press MENU to display the DVD menu screen

and then make your selection.

mark will be displayed.

mark is displayed.

•

When you erase the resume position or replace a disc, the DVD

player returns to the automatic setting in the setting menu (page 53).

•

When you erase the resume position or replace a disc, the DVD

player returns to the automatic setting in the setting menu (page 54).

I Changing Audio Type

For enjoyment of karaoke or similar format Video CDs, CDs and

MP3s, it is possible to select stereo audio, or either right or left

channel mono depending on the requirements of the source.

Press AUDIO repeatedly during playback to switch the audio

type.

Audio output changes from [1/L] (Left channel) to

[2/R] (Right channel) to [Stereo].

Audio

: 2/R

Audio

: 1/L

Audio

: Stereo

Note

With karaoke and other discs, set the appropriate audio type for

singing and accompaniment after referring to information on the disc

jacket or accompanying material.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

Continuing Playback from a

STANDBY ANGLE

AUDIO SUBTITLE

STANDBY

LAST M

LAST

COND.M DIMMER DISPLAY

TOP MENU

Specified Location (Last Memory)

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

The Last Memory function is convenient when you want

to continue viewing a disc from the point where you were

watching before. Unlike the resume function, the Last

Memory function is effective even if the DVD is removed

from the player (Last Memory locations saved for Video

CDs are effective only if the disc remains loaded in the

player).

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

Last Memory may not work reliably with some Video CDs

that feature PBC.

DVD TV

VCD

DVD-V

Memorizing a Last Memory location to

return to later

Resuming playback from where LAST

MEMORY was pressed

LAST M

Press LAST M during play.

The “LAST” indicator lights on the player.

Load a disc that has a Last Memory

point memorized.

Some DVDs will start playback

automatically when loaded. In this case,

press 7to stop playback.

STANDBY

Press STANDBY to turn the power

to standby, or stop playback with 7.

LAST M

Press LAST M while in the stop

Once memorized, the memorized point will

be recalled even if the power is turned off,

or if the disc is ejected. Points on up to 5

discs can be memorized, and those points

are recalled the next time any of the discs

are played back.

mode.

The disc begins playback at the

memorized point.

• Last Memory mode may not function for

some DVDs.

• A Last Memory point can be memorized

for only one disc at a time as the

function is only effective until the Video

CD is removed from the player.

• You can use Last Memory for up to five

discs (after that the one used least

recently is deleted to make space for a

new one).

• Even with a disc you have memorized

with Last Memory, playback begins at

the start of the disc if you press £.

• This function is for playback of DVDs or

Video CDs only. You cannot use it with

CDs and MP3s.

I To clear the Last Memory location

1 Load a disc that has a Last Memory point memorized.

Some DVDs will start playback automatically when loaded. In this

case, press 7to stop playback.

2 Press LAST M while in the stop mode.

The disc begins playback at the memorized point.

3 Once the picture appears, press LAST M again.

4 While “Last Memory” is displayed on the screen, press

CLEAR.

The “LAST” indicator disappears from the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

Memorizing Settings for Often

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

COND. M

Viewed DVDs (Condition Memory)

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

You can store in memory settings for DVDs you often

watch. Settings remain in memory even if you remove the

disc from the player, or switch power to the player to

standby. If you load a disc that has its settings

memorized, “COND.” appears in the display. When you

start playing the disc, the memorized settings are

automatically recalled.

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

Memorizing Settings for DVDs

I When a disc that has memorized settings is

COND.M

Press COND. M during playback.

Settings are memorized for the disc

currently playing.

loaded

“Condition Memory” will appear on the screen, and the

previously memorized settings will be selected.

The following six settings are memorized:

On Screen Display (page 18, 53)

Video Adjust (page 18, 48)

I Erasing the recorded contents

Load a disc that has memorized settings, and press CLEAR

while “Condition Memory” is being displayed. The disc’s

recorded data will be erased.

Multi-Angle (page 34)

Multi-language (pages 53)

Notes

Multi-Language subtitles (page 35, 54)

Parental Lock Level (page 57-59)

• Settings are stored in memory for use any time.

• You can use Condition Memory for up to 15 discs (after that the

one used least recently is deleted to make space for a new one).

• If you make changes to any of the settings memorized in

Condition Memory, press COND. M during playback to memorize

new settings.

• Switching of the multi-language mode etc., is automatic on some

discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning Off the Video Signal Output

The DVD Player can be set playing audio exclusively. In

this case, you can obtain sound of better quality, as the

DVD Player does not process video signals. (All the

video output jacks send no video signals.)

Sampling Rate (kHz)

192/176.4

96/88.2

Standby/On

Open/Close

Stop

Play

Pause

48/44.1

Video Circuit

Off

Last Memory

Repeat

Clear

Top Menu

Return

Setup

Cursor

Standby

Power

Phones

Phones Level

Dimmer

Random

Display

Push to Enter

Off

Min

Max

DPS 7.2

Video Circuit Off

DVD

VCD

MP3

Switching the video signal off

Notes

• Some discs cannot be played without some on-screen menu

Press Video Circuit Off on the DVD

Video Circuit

Off

Player repeatedly.

interaction. If this is the case, be sure to perform the on-screen

procedures as indicated before turning off the video signal

processing circuitry.

• The Video Circuit Off setting is canceled whenever the DVD

Player is turned off.

The Video Circuit Off indicator lights up.

To turn on the video circuitry, press the

button again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Listening through Headphones

You can connect stereo headphones to the DVD Player.

Sampling Rate (kHz)

192/176.4

96/88.2

Standby/On

Open/Close

Stop

Play

Pause

48/44.1

Video Circuit

Off

Last Memory

Repeat

Clear

Top Menu

Return

Setup

Cursor

Standby

Power

Phones

Phones Level

Dimmer

Random

Display

Push to Enter

Off

Min

Max

DPS 7.2

Phones jack

Phones Level

DVD

VCD

MP3

VCD

MP3

Listening through Headphones

Adjusting the phones level

Phones

Phones Level

Connect the plug of the stereo

headphones to the Phones jack on

the DVD player.

Turn the dial clockwise to increase

the phones level and

counterclockwise to decrease it.

Min

Max

Open/Close

Stop

Play

Pause

Top Menu

Return

Setup

Cursor

Phones

Phones Level

Display

Push to Enter

Min

Max

DPS 7.2

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Disc Information

Use DISPLAY to get current information about the disc

currently loaded.You can get information about the titles

and chapters on a DVD-Video, groups and tracks on a

DVD-Audio or tracks on a Video CD or CD or folders and

tracks on a MP3. When viewing DVDs, you can also check

the digital bitstream transmission rate.

DVD

VCD

MP3

Viewing Disc Information during while a disc is playing

DVD-Audio

DISPLAY

Press DISPLAY during while a disc

current group/track number

elapsed time of current track

is playing. Press DISPLAY

repeatedly to change the

information being displayed.

Play

Track

1–1

–0.59/

1.19

2.18

remaining total time of

current track

remaining time of current track

The disc information is displayed

superimposed over the video image on the

screen.

current group/track number

elapsed time of current track

Press and hold DISPLAY to display

the time remaining on the disc.

Play

Group

1–1

–1.19/

1.19

2.18

When you release the button, the

information disappears.

elapsed time of current track

remaining total time of

current track

The display changes for each type of disc as follows each time

the button is pressed.

current group/track number

elapsed time of current track

Play

Tr. Rate:

1–1

1.19

8.9

DVD-Video

current title/chapter number

elapsed time of current title

transmission rate level meter transmission rate level

Play

Title

3–29

–51.06/ 101.04

49.58

remaining total time of

current title

remaining time of current title

Display off

current title/chapter number

elapsed time of current title

Video CD (with PBC disabled)

Play

Chapter

3–32

0.21/

54.53

1.51

current track number/

total number of tracks

Video CD's total elapsed time

elapsed time of current chapter

elapsed total time of

current chapter

Play

All

3/12

–59.26/

10.53

70.19

current title/chapter number

elapsed time of current title

Video CD's remaining time

Video CD's total time

Play

Chapter

3–32

–1.30/

54.53

1.51

current track number

Video CD's total elapsed time

remaining time of current chapter remaining total time of

current chapter

Play

Track

10.53

5.23

3.56/

current title/chapter number

elapsed time of current title

elapsed time of current track

total time of current tracks

Play

Tr. Rate:

3–32

54.53

6.3

current track number

Video CD's total elapsed time

transmission rate level meter transmission rate level

Play

Track

10.53

5.23

1.27/

total time of current tracks

remaining time of current track

Display off

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

DISPLAY

DIMMER

TOP MENU

2/3

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

I Using DIMMER function

DOWN

STEP/SLOW

Press DIMMER to change the display brightness.

Each time DIMMER is pressed, the display brightness of the unit

changes as shown below.

FUNCTION

SEARCH CLEAR

Normal → Dim → Very Dim → Normal

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD

VCD

MP3

Viewing Disc Information during while

a disc is stopped

current track number

elapsed time of current track

DISPLAY

Play

Track

0.03

3.32

Press DISPLAY during while a disc

–3.29/

is stopped to display DVD title and

chapter information or Video CD

and CD track information or MP3

folder and track information. Press

DISPLAY again to turn the display

off.

Information about the titles and chapters or

folders and tracks on a disc is displayed.

When the information exceeds the space

on the screen, use the cursor buttons (2/

3) to move to other screens.

remaining time of current track

remaining total time of

current tracks

current track number

current total time of tracks

Play

All

1/10

–66.20/

1.13

66.32

CD's remaining time

CD's total time

Display off

MP3

DVD-Video

Information: DVD

current track number/

total number of tracks in folder elapsed time of current track

Title

Chapter

Title

Chapter

1 ~ 10

1 ~ 13

1 ~ 5

1 ~ 30

1 ~ 21

1 ~ 46

1 ~ 12

1 ~ 8

Play

Track

16/20

TRACK1~1

0.05

1 ~ 4

1 ~ 8

track name

DISPLAY

Exit

1/2

current folder number/

total number of folder

Titles and number of chapters in each title

elapsed time of current track

Play

Folder

2/10

FOLDER~1

0.05

DVD-Audio

Video CD and CD

MP3

Information: DVD

Group

Track

Group

Track

1 ~ 1

1 ~ 4

folder name

1 ~ 1

current folder number/

current track number elapsed time of current track

DISPLAY

Exit

1/1

Play

Track

2–16

–2.25

0.05

2.30

Groups and number of tracks in each group

remaining time of

current track

total time of

current track

Information: Compact Disc

Total time

Track

72 . 04

Track

Time

5 . 23

4 . 55

6 . 13

5 . 45

5 . 10

6 . 51

3 . 18

6 . 50

4 . 16

3 . 22

current folder number/

current track number

elapsed time of current track

Play

Tr. Rate:

2–16

128kbps

0.05

DISPLAY

Exit

1/2

Total playing time of disc, tracks and track times

transmission rate level

Information: MP3

Display off

Folder

001

002

Track

1 ~ 9

1 ~ 11

1 ~ 3

Folder

001

002

Track

1 ~ 10

1 ~ 13

1 ~ 5

Notes

003

• Depending on the format and type of disc being used, not all

screens may be displayed.

• When playing Video CDs in PBC mode or unfinalized CD-Rs not

all the above information is displayed.

004

005

1 ~ 22

1 ~ 15

004

005

1 ~ 4

1 ~ 8

DISPLAY Exit

1/2

Folders and number of tracks in each folder

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

The procedure on this page describes how to operate the

menus on the Setup screen.These menus are used to set

and adjust a number of system settings.The various

functions that can be adjusted are covered throughout

this manual.The procedure on this page provides a basic

outline for using the Setup screen menus.

Using the Setup Screen Menus

Press ON (Standby/On on the front

panel).

Use the cursor buttons (3) to enter

the setting options.

Example

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out

DTS Out

Dolby Digital

Dolby Digital 3 PCM

SETUP

Press SETUP.

The Setup screen appears.

Example

Linear PCM Out — Down Sample On

MPEG Out — MPEG 3PCM

Output Dolby Digital

SETUP

ENTER

Move

Select

Exit

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — DTS 3PCM

Linear PCM Out — Down Sample On

MPEG Out — MPEG 3PCM

• Not all menu options can be changed

while a disc is playing. In these cases,

the options appear grayed out on the

screen and cannot be adjusted. To

change these settings, press 7first

before pressing SETUP.

Setup audio

Digital output format/tone adjust

SETUP

Exit

Move

Use the cursor buttons (2/3) to

• Operating the menu after pressing 7

may cancel the resume function.

select the menu you want.

As each menu is selected with the cursor,

the settings appear below the menu

heading.

• Some menu options are not immediately

effective if set while a disc is playing. To

make these settings effective, stop

playback and then start again, or

change the settings while the disc is

stopped.

Use the cursor buttons (∞) to enter

the menu.

The top item within the menu becomes

highlighted.

Example

Use the cursor buttons (5/∞) to

select a new setting and press

ENTER to set the new setting in

memory.

Press RETURN or the cursor button (2) to

exit the options without making any

changes.

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

ENTER

Dolby Digital Out

DTS Out

Dolby Digital

Dolby Digital 3 PCM

Linear PCM Out — Down Sample On

MPEG Out — MPEG 3PCM

Change Dolby Digital output mode

SETUP

Move

Exit

RETURN

Press RETURN or the cursor button

(2) to go back to the main menu bar

to select another menu.

Use the cursor buttons (5/∞) to

select the setting you want to

change.

The options available for each setting

appear to the right when the setting is

selected. The current setting appears with

the setting indicator lit.

SETUP

Press SETUP to close the Setup

screen.

The Setup screen closes.

Notes

• If you turn off the DVD player during setup, the settings are

canceled. Press SETUP to finish the setup.

• The memorized resume position may be erased by setup.

• The Setup screen always shows the latest settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

VOL

ENTER

SETUP

ENTER

2/3/5/∞

VOL

RETURN

TV/VCR

SETUP

RETURN

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

Changing to the Setup Screen “Expert”

Menu Mode

I When setting up for the first time

The Setup screen menus are divided into two levels, [Basic]

and [Expert], to make this unit more convenient to operate for

different levels of users. The [Basic] menu mode contains

functions that may be considered necessary for the basic

operations of this player and helpful on-screen information

It is recommended to set up player using the Setup Navigator

(page 17). If you selected [Auto Start Off] when the Setup

Navigator appeared, you may still set up the player using the

Setup Navigator in the General menu screen.

If you choose not to use the Setup Navigator, be sure to make

the necessary settings in the Setup screen Audio 1, Audio 2,

Video 1, Video 2 and Language menus as described on the

following pages.

identified by the

mark. The [Expert] menu mode adds to the

[Basic] menu mode additional functions of the player that can

be adjusted to further personalize performance of the player.

In this manual, functions that are contained in the [Expert]

Some DVDs start playing automatically when loaded in the

player. If a DVD has been loaded, be sure to press 7 before

proceeding.

menu mode are identified by the

Make changes to the [Setup Menu Mode] setting in the Setup

screen General menu.

icon.

Expert

Note

Audio1

V2 Language

General

A2 Video1

Setup Menu Mode — Expert

Setup Navigator

Basic

Parental Lock — Off (us)

The next time you press SETUP, you’ll see the menu screen that you

exited from last time.

I How to interpret the setting indicator colors

Change menu mode

Move

in the Setup screen menus

SETUP

Exit

When setting up the system, or when making adjustments, it is

convenient to know what settings are applicable to the

different disc formats. When the settings appear for each

menu option, the currently selected setting appears with the

setting indicator highlighted in one of three colors: blue,

orange or yellow. These colors correspond to what formats the

menu option effects as shown in the table below.

Settings: Expert

Basic (Factory setting)

Note

On-screen information only appears in the [Basic] menu mode .

Color of indicator

Blue

Disc format(s)

DVD only

Orange

Green

CD only

All compatible formats

Note

If a setting applicable only to DVDs is changed while a Video CD or

CD is loaded, a blue DVD icon appears in the upper right hand

corner of the screen to indicate that the setting is not applicable to

the currently loaded disc. The setting will be effective the next time a

DVD is loaded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Adjusting the Dynamic Range of the

Audio Soundtrack

Audio DRC stands for Audio Dynamic Range Compression.

When Audio DRC is on, soft sounds such as dialog can be

heard more clearly without making loud sounds even louder.

When Audio DRC is set to [Off], there is no effect on the audio

source.

Setting the Audio 1 Options

This player is capable of digital audio output for Dolby Digital,

DTS, MPEG, and signals with a sampling rate of 96 kHz.

Make settings in the Setup screen Audio menu to reflect the

capabilities of the components that you have made digital

connections to.

Make changes to the [Audio DRC] setting in the Setup screen

Audio menu.

Notes

• If you have already completed the Setup Navigator screen

operations, the settings on this page have already been set by

the player.

• If you have made only stereo line connections (analog) using the

supplied audio cord, it is not necessary to make any changes in

this menu.

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out

DTS Out — DTS 3PCM

Linear PCM Out — Down Sample On

MPEG Out — MPEG 3PCM

Dynamic playback at low volume

SETUP

Move

Exit

I Dolby Digital Out

Settings: Off (Factory setting)

This player is capable of outputting the Dolby Digital surround

sound audio signal. When the player is connected to an AV

component that has a built-in Dolby Digital decoder, select

[Dolby Digital]. This player can also convert the Dolby Digital

signal to a digital Linear PCM signal, the same digital signal

output from a CD. Select [Dolby Digital 3PCM] when you

have made connections to an amplifier or receiver with a

Dolby Pro Logic decoder or a Digital Analog Converter (DAC).

Notes

• Audio DRC is only effective with Dolby Digital audio sources.

• The level of Audio DRC may differ depending on the DVD.

• If you have set the [Dolby Digital Out] to [PCM] and the [Digital

Out] setting to [On], the Audio DRC effect is output through the

digital out jack.

• The effect of Audio DRC depends on your speakers and AV

amplifier settings.

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out

DTS Out

Dolby Digital

Dolby Digital 3 PCM

Linear PCM Out — Down Sample On

MPEG Out — MPEG 3PCM

Change Dolby Digital output mode

SETUP

Move

Exit

Settings: Dolby Digital (Factory setting)

Dolby Digital 3PCM

Download from Www.Somanuals.com. All Manuals Search And Download.

I DTS Out

I MPEG Out

This player is capable of outputting DTS digital audio for DVDs

recorded in DTS. When this player is connected to an AV

component that has a built-in DTS decoder, select [DTS]. If

your system is not equipped to decode DTS, select [DTS 3

PCM]. Refer to the operating instructions supplied with your

audio components if you are unsure about compatibility with

DTS.

This player is capable of outputting the MPEG digital

bitstream. When the player is connected to an AV component

that has a built-in MPEG decoder, select the [MPEG] setting.

Otherwise, select [MPEG 3PCM] to convert the digital signal

to the PCM signal, the digital signal output from a CD.

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — DTS 3 PCM

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — DTS

Linear PCM Out

MPEG

MPEG Out — MPEG 3 PCM

Change MPEG audio output mode

Linear PCM Out

MPEG Out — MPEG 3PCM

Change DTS output mode

DTS3PCM

SETUP

Move

Exit

Settings: MPEG

SETUP

Move

Exit

MPEG 3PCM (Factory setting)

Settings: DTS

Expert

I Digital Out

DTS 3PCM (Factory setting)

Depending on your preferences and the type of connections

made, you may opt not to have the digital audio signal output

at all. When this setting is set to [Off] there is no signal output

from the digital audio output jacks.

Make changes to the [Digital Out] setting in the Setup screen

Audio menu in the [Expert] menu mode (page 43).

Note

If you have made digital audio connections to component(s) not

equipped to decode the DTS digital bitstream, be sure to select [DTS

3 PCM]. If a DTS signal is output without decoding, the output is

digital noise that could potentially cause damage to your speakers.

Audio1 A2 Video1 V2 Language General

I Linear PCM Out

Audio DRC — Off

If your AV amplifier (or other connected component) is

compatible with high sampling rates (96 kHz), set this to

[Down Sample Off], otherwise set it to [Down Sample On] (96

kHz audio is converted to a more compatible 48 kHz). Check

the manual that came with the other component if you’re

unsure whether it is 96 kHz compatible.

Dolby Digital Out — Dolby Digital

DTS Out — DTS 3 PCM

Linear PCM Out — Down Sample On

MPEG Out — MPEG 3 PCM

Digital Out

Off

SETUP

Move

Exit

Settings: On (Digital bitstream is output) (Factory setting)

Off (Digital bitstream is not output)

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — DTS 3PCM

Linear PCM Out — Down Sample On

MPEG Out

Down Sample Off

Change PCM output mode

SETUP

Move

Exit

Settings: Down Sample On (Factory setting )

Down Sample Off

Note

On DVDs that contain copy protection, the 96 kHz signal may only

be output from the analog audio jacks.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Setting the Audio 2 Options

I Audio Out

I Speaker Setting

If you connected this player to your amplifier using the 5.1

channel analog outputs (front, surround, center and subwoofer

outs), set this to [5.1 Channel]; if you connected only the

stereo outs, set to [2 Channel].

You only need to make this setting if you connected this player

to your amplifier using the 5.1 channel analog outputs.

Follow the on-screen displays to describe which speakers are

in your system and their sizes and positions.

Set the size of your speakers in the Size screen. The front left/

right (L/R) speakers have a fixed setting of [Large]. The center

(C), left surround (LS) and right surround (RS) speakers can

each be set to [Large], [Small] or [Off]. Set a speaker to

[Large] if the main speaker cone is 12cm or more; set to

[Small] if the it’s less than 12cm. Note that the LS and RS

speakers cannot be set independently.

Language

A1 Audio2 Video1 V2

Audio Out — 2 Channel

Speaker Setting 5.1 Channel

General

Setting up audio output

SETUP

Move

Exit

The subwoofer (SW) can only be set to [On] or [Off].

Settings: 2 Channel (Factory setting)

The graphic on the right of the screen represents your speaker

setup, with the currently selected speaker’s name highlighted

in blue, and the speakers set to [On] highlighted in yellow.

Set the distance from your main listening position to each

speaker in the [Distance] screen. The distance setting for any

speaker that was set to [Off] in the [Size] screen will be grayed

out. For the other speakers, enter the distance to the nearest

0.1m (10cm). You can set the distance for the L/R speakers

between 0.3m and 9m. Note that you must set the C and SW

speakers within 2m of the L/R setting. The LS and RS

speakers must be set within –6m and +2m of the L/R setting.

The graphic on the right of the screen represents your speaker

setup, with the currently selected speaker’s name highlighted

in blue, and the speakers set to [On] highlighted in yellow.

5.1 Channel

Note

• Even if you set [Audio Out] to [5.1 Channel], you’ll only get sound

from all speakers when playing a multi-channel DVD-Audio disc,

or Dolby Digital, DTS or MPEG encoded DVD disc.

• If you set to 2 Channel, Dolby Digital, DTS and MPEG audio is

mixed down to two channels so you still hear all the audio

recorded on the disc.

• Some DVD-Audio discs don’t allow down-mixing of audio. These

discs always output multi-channel audio regardless of the setting

made here.

Language

A1 Audio2 Video1 V2

Audio Out — 2 Channel

Speaker Setting Start

General

Setting the speaker

system configuration

ENTER

SETUP

Move

Select

Exit

Language

A1 Audio2 Video1 V2

General

Speaker Setting

Size

L/R

—

Large

LS RS

RETURN

SETUP

Return

Exit

ENTER

Distance

Select

Factory Settings: Center:

Large

Subwoofer: On

Surround: Large

Distance: All 3.0m

Note

If your subwoofer is placed beyond the adjustment range (L/R 2m),

set to the nearest setting possible. Surround sound cohesion should

not be affected very much.

Download from Www.Somanuals.com. All Manuals Search And Download.

Expert

I Gain Settings

I CD Digital Direct

You may want to make this setting if you connected this player

to your amplifier using the 5.1 channel analog outputs.

Under the default setting, all channels are output at the

relative volumes they were recorded at. Change the setting to

[Variable] if you want to adjust the relative volume levels of

any of the speakers. Adjustment is in the range of –6dB to

+6dB, in steps of 0.5dB.

Setting this to On increases CD audio quality by bypassing

certain audio circuits in the player that audio signal would

otherwise pass through. However, this must be set to [Off] for

proper playback of DTS encoded CDs.

Language

A1 Audio2 Video1 V2

Audio Out — 2 Channel

Speaker Setting

Gain Setting — Fix

General

When set to [Variable], the overall output level may sound

quieter than when set to [Fix]. This is not a malfunction.

CD Digital Direct

Off

Language

A1 Audio2 Video1 V2

Audio Out — 2 Channel

Speaker Setting

Gain Setting — Fix

CD Digital Direct Variable

General

SETUP

Move

Exit

Settings: On

Off (Factory setting)

ENTER

SETUP

Select

Exit

Move

Note

If this setting is set to [On] when a DTS CD is playback, noise is

produced.

Language

A1 Audio2 Video1 V2

Gain Setting

General

—

0.0 dB

LS RS

RETURN

SETUP

Return

Exit

ENTER

Test Tone

Select

Settings: Fix (Factory setting)

Variable

Note

Gain settings are not effective when playing a CD with CD Digital

Direct set to [On].

To help you gauge the correct gain levels, set the [Test Tone]

to [On] (test tone from just that speaker) or [Auto] (test tone

from each speaker in turn, excluding the subwoofer) then

adjust the gain so that all speakers appear to be the same

volume from your listening position.

Follow the on-screen displays to select speakers and set the

channel levels.

• You can adjust the [Test Tone] setting only when the player

is stopped.

• Many AV amplifiers allow you to make similar settings at the

amplifier stage. In this case, set the channel levels at the

player or the amplifier, not both.

• As the test tone plays through a speaker, its name is

highlighted in yellow on-screen.

Language

A1 Audio2 Video1 V2

General

Test Tone

—

Off

LS RS

RETURN

SETUP

Return

Exit

ENTER

Gain

Select

Note

You can't use the test tone function when the Audio Out setting is 2

Channel (see page 46).The test tone will not work with the disc tray

open, or while a disc is playing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Setting the TV Screen Size

The width-to-height ratio of conventional TVs is 4:3, while the

width-to-height ratio of wide screen and high-definition TVs is

16:9. This width-to-height ratio is called the aspect ratio.

When viewing software recorded in different aspect ratios, the

image’s height to width ratio can be switched to match the TV

or monitor being used.

Make changes to the TV screen size in the [TV Screen] setting

in the Setup screen Video 1 menu. Please note that changes

to the [TV Screen] setting cannot be made when a disc is

playing. Stop playback of the disc before attempting to make

any changes.

When viewing a wide screen TV or monitor

DVD screen size format

Setting and Appearance

Wide screen format DVD

Please note that there are some

wide screen letter box formats

that place black bars at the top

and bottom of the screen. This is

not a malfunction.

“Wide” setting

Standard screen format DVD

When viewing a standard screen

format DVD on a wide screen

TV, black bars may be

automatically placed at the side

of the screen to adjust to the

DVD format.

Language

Audio1 A2 Video1 V2

TV Screen — 4:3(Letter Box)

Video Out 4:3(Pan&Scan)

General

“Wide” setting

16:9(Wide

)

Standard screen format DVD

(unnatural stretched effect)

If you are viewing a standard

screen format DVD on a wide

screen TV, the picture may

appear ‘stretched’ on the

screen. To remedy this

Select your display preference

SETUP

Move

Exit

Settings: 4:3 (Letter Box)

4:3 (Pan & Scan)

condition, change your wide

screen TV to display a standard

(4:3) screen. Refer to the

instructions supplied with your

wide screen TV or monitor for

more information.

16:9 (Wide) (Factory setting)

Notes

“Wide” setting

• If [Standard (4:3)] is selected in the Setup Navigator screen, [4:3

(Letter Box)] is selected on this screen. If you prefer the

pan&scan format, change the settings on this screen.

• Whether the aspect can be switched or not depends on the disc.

Please refer to the information written on the disc jacket, etc.

• Some discs may not include the screen format selected in the [TV

Screen] setting. When this occurs, the standard TV screen format

available on the disc is automatically selected.

When viewing a standard size TV or monitor

DVD screen size format

Setting and Appearance

Wide screen format DVD

The Letter box presentation

places black bars at the top and

bottom portions of the screen to

provide the full wide screen

presentation of a movie on a

standard TV (4:3 aspect ratio).

I Differences in screen sizes and DVD

formats

The number of screen size formats currently available can be

somewhat confusing. If set incorrectly, the video presentation

may not appear as it should. The following diagrams and

descriptions are intended to help you set your TV screen size

in a way that will allow you to fully enjoy the digital video of

DVD.

The settings in the [TV Screen] setting are perhaps most

applicable when the DVD you are watching is programmed in

the wide screen format. If you have a standard TV, select

either [4:3 (Letter Box)] or [4:3 (Pan & Scan)] based on your

personal preference. If you have a wide screen TV, select

[16:9 (Wide)].

“Letter Box” setting

Wide screen format DVD

The Pan & Scan presentation

crops both sides of the wide

screen presentation to use the

full standard TV screen.

“Pan & Scan” setting

Standard screen format DVD

If you have a standard TV, the

standard screen format will be

presented regardless of the

setting.

Any setting

Wide screen format DVD

(unnatural squeezed effect)

If you are viewing a wide screen

format DVD on a standard TV

and the [TV Screen] setting is

set to [16:9 (Wide)], the picture

may appear ‘squeezed’ on the

screen. To remedy this

condition, select either [4:3

(Letter Box)] or [4:3 (Pan &

Scan)].

“Wide” setting

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Video 1 Options

I Turning the Screen Saver On and Off ^Expert

I Switching the S-Video Output ^Expert

As a protective function against residual images on the TV

screen or monitor, a phenomenon referred to as “screen burn”,

the screen saver appears when the same screen has been

displayed for a length of time. By default, the screen saver is

turned on. However, the screen saver function can be turned

on and off at your discretion.

You can switch the kind of S-Video signal output from the S-

Video outputs. If you connected your TV with an S-Video cord,

in rare cases the TV picture may appear stretched. In this

case switch the output from [S2] to [S1].

Make changes in the [S-Video Out] in the Setup screen Video

1 menu in the [Expert] menu mode (page 43).

Make changes to the [Screen Saver] setting in the Setup

screen Video 1 menu in the [Expert] menu mode (page 43).

Language

Audio1 A2 Video1 V2

General

TV Screen — 16:9(Wide

S-Video Out — S1

)

Language

Audio1 A2 Video1 V2

General

Screen Saver

TV Screen — 16:9(Wide

S-Video Out — S2

Screen Saver — On

Off

)

SETUP

Move

Exit

SETUP

Move

Exit

Settings: S1

S2 (Factory Setting)

Settings: On (Factory setting)

Off

Note

Pressing 8 (or £) displays a playback screen, and pressing 8 (or

£) again resumes playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Adjusting the Video Quality

You can either select a preprogrammed setting designed to

I Adjusting the picture quality settings

– To create your own setting (1)

1 Use the cursor button (3) to select [Start] then press

match certain program types or make adjustments to match

your own preferences and save them in the player’s memory.

Make changes to the [Video Adjust] setting in the Setup

screen Video 2 menu.

ENTER.

Language

Audio1 A2 V1

Video2

General

Background — Gray

Video Adjust — Start

Video Memory Select

Video Setup

2 Use the cursor button (∞) to select [Video Setup] then

Picture Quality Control

press ENTER.

SETUP

Move

Exit

I Selecting a preprogrammed setting

1 Use the cursor button (3) to select [Start] then press

ENTER.

Video Memory Select

Video Setup

3 Use the cursor buttons (2/3) to select the setting to [On] or

[Off].

Video Memory Select

Video Setup

2 Press ENTER.

DNR

off

max

ENTER

DISPLAY

Check

Move

Select

4 Use the cursor buttons (5/∞) to select the setting to adjust.

TV(CRT)

Memory 1

PDP

Memory 2

Professional

Memory 3

You can adjust any or all of the following picture quality factors:

DNR

Adjust to control the amount of signal noise in the luminance

component of the video signal.

Fine Focus

Switch [On] to reveal greater detail (higher resolution) in the

picture.

Sharpness

Adjusts the sharpness of the high-frequency (detailed) elements

in the picture. (This setting is only effective when [Fine Focus] is

[On].)

White Level

Adjusts the intensity of white in the picture.

Black Level

Adjusts the intensity of black in the picture.

Hue

Adjusts the overall red/green color balance. (This is only effective

when the player is connected using the VIDEO OUTPUT VIDEO

or VIDEO OUTPUT S VIDEO jacks.)

Chroma Level

TV (CRT) (Factory Setting)

Optimized setting for a standard television set.

PDP

Optimized for a plasma display.

Professional

Optimized for a professional monitor.

Memory 1, Memory 2, and Memory 3

These are user programmable settings. See ‘Adjusting the picture

quality settings’ on pages 50 and 51 for more information.

3 Use the cursor buttons (2/3/5/∞) to select one of the

preprogrammed picture quality settings.

If there is a DVD or Video CD playing, the effects of each setting

can be viewed while it is highlighted on the screen. This may be

useful in selecting an appropriate setting.

4 Press ENTER.

The new selection is set.

Notes

Adjusts how saturated colors appear.

Gamma

Adjusts the brightness of the darker images in the picture.

• Each picture quality setting is defined by a number of individual

settings, described in ‘Adjusting the picture quality settings’ on

pages 50 and 51.

• Depending on the disc and the TV/monitor, you may not see the

effect clearly.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Use the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes

immediately.

6 Repeat steps 4 and 5 to make adjustments to other

settings.

I Adjusting the picture quality settings

– To create your own setting (2)

1 Use the cursor button (3) to select [Start] then press

ENTER.

If you would like to save the settings in the player’s memory, be

sure to select either [1], [2], or [3] in the [Memory] setting to

establish which memory location to save the new settings in.

Please note that if you select a location where settings have

already been saved, the old settings will be replaced by the new

ones.

Video Memory Select

Video Setup

2 Use the cursor button (∞) to select [Video Setup] and press

ENTER.

3 Press DISPLAY.

off

max

DNR

Memory

Move

Off

Select

Fine Focus

Sharpness

White Level

Black Level

Hue

On Off

soft

min

green

min

–

fine

max

red

max

DISPLAY

ENTER

Check

7 When you are finished making adjustments, press ENTER

to establish the new settings.

Chroma Level

Gamma

Memory

Off

4 Use the cursor buttons (5/∞) to select the setting and use

the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes

immediately.

5 To memorize the setting, select Memory 1, 2, 3, then press

ENTER.

The previous setting will be erased.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Setting the Video 2 Options

I Changing the Background of the Screen

You can select a background to appear when the player is in

the stop mode.

Make changes to the [Background] setting in the Setup screen

Video 2 menu.

I Setting the Position of the On-screen

Display ^Expert

When watching conventional software on a wide screen TV,

the operation display is at the very top of the screen, and may

be difficult to see. Changing the position of the display lets you

see operation indicators clearly even on a wide screen TV.

Alternatively, you can choose to turn them off completely with

the [Off] setting.

Language

Audio1 A2 V1

Video2

General

Background — Gray

Video Adjust

Black

Make changes in the [On Screen Display] in the Setup screen

Video 2 menu in the [Expert] menu mode (page 43).

Put Background Selections

Language

Audio1 A2 V1

Video2

General

SETUP

Move

Exit

Background — Gray

Video Adjust

Still Picture — Auto

Settings: Gray (Factory setting)

Black

On Screen Display — Position-Wide

Angle Indicator

Position-Normal

Off

I Selecting the Type of Paused Image to

Expert

SETUP

Move

Exit

Display

This function lets you view a clear still-image when DVD

playback is paused.

Settings: Position-Wide

Position-Normal (Factory setting)

Make changes in the [Still Picture] setting in the Setup screen

Video 2 menu in the [Expert] menu mode (page 43).

Off

Note

Language

Audio1 A2 V1

Video2

General

This setting is only effective with DVDs that contain a 4:3 aspect

ratio video presentation.

Background — Gray

Video Adjust —

Still Picture — Field

On Screen Display

Angle Indicator

Frame

Auto

Expert

I Turning the angle indicator on and off

When a picture recorded in different angles is played back

is displayed on the screen. This setting lets you see clearly

whether the playback picture is recorded in multiple angles or

not.

Turn the angle indicator on or off in the [Angle Indicator]

setting in the Setup screen Video 2 menu in the [Expert] menu

mode (page 43).

SETUP

Move

Exit

Settings: Field (Picture shake will be eliminated during a

paused picture.)

Frame (Select to obtain higher picture quality.)

Auto (Selects [Field] or [Frame] automatically

according to the disc.) (Factory setting)

Language

Audio1 A2 V1

Video2

General

Background — Gray

Video Adjust

Still Picture — Auto

On Screen Display — Position-Normal

Angle Indicator — On

Off

SETUP

Exit

Move

Settings: On (

is displayed) (Factory setting)

Off (Not Displayed)

Note

Even when the [Angle Indicator] setting is set to [Off], the

indicator in the display panel of the player lights during multi-angle

playback. Therefore, it is possible to know when the multi-angle

function can be used without having to display the icon on the

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Language Options

DVDs have the capacity to contain a great deal of audio

information, which includes the ability to hold up to 8 different

language tracks and subtitle information in as many as 32

different languages. This section outlines the variety of audio

language and subtitle options available with this player.

Please note that if you have completed the Setup Navigator,

the audio and subtitle language options have automatically

been set in accordance with the [OSD Language] (the

language that appears on the screen).

I Selecting an audio language preference

The audio language that you normally listen to can be

selected from the various audio languages on a DVD. Even

when the audio language is changed during playback by

pressing AUDIO, the language selected at this setting will be

selected as the default when the DVD is changed.

Make changes to the [Audio Language] setting in the Setup

screen Language menu.

You cannot make this setting with a disc playing.

Note

General

Audio1 A2 Video1 V2 Language

DVDs differ in content and do not all contain multiple language or

subtitle information. Therefore making settings in this section may

have no effect on some DVDs.

OSD Language

Audio Language

Subtitle Language

Auto Language

English

French

German

Italian

Spanish

Other

I Setting the On-screen Display (OSD)

Setup audio language

Language

SETUP

Move

Exit

This setting is used to establish the language that operation

indicators and on-screen messages and operations display.

Change this setting in the Setup screen Language menu [OSD

Language] setting.

Settings: English (Factory setting)

French

German

Italian

General

Audio1 A2 Video1 V2 Language

Spanish

OSD Language — English

Other (For details on how to select other

languages, see ‘When [Other] is selected’ on page

55.)

Audio Language

Subtitle Language

Auto Language

français

Deutsch

Italiano

Español

Select the On Screen Language

Note

The menu settings may be different from those shown above.

SETUP

Move

Exit

Settings: English (Factory setting)

français

Deutsch

Italiano

Español

Notes

• The menu settings may be different from those shown above.

• The [OSD Language] setting is factory set to [English]. If you

want English to be displayed, it is not necessary to adjust this

setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Setting the Language Options

I Selecting a subtitle language preference

I Selecting a DVD menu language preference

Expert

The subtitle language that you will normally display can be

selected from the subtitles programmed on a disc. Even when

the subtitle language is changed during playback by pressing

SUBTITLE, the language selected at this setting will be

selected when the disc is changed.

Make changes to the [Subtitle Language] setting in the Setup

screen Language menu.

You cannot make this setting with a disc playing.

In addition to containing different audio languages, DVD may

also contain menu screens in different languages as well.

Setting a DVD language preference, sets the selected

language as a default when DVDs with menu information in

that language are encountered.

Selecting [w/ Subtitle Language] automatically assigns the

language selected in the [Subtitle Language] setting.

Make changes to the [DVD Language] setting in the Setup

screen Language menu in the [Expert] menu mode (page 43).

You cannot make this setting with a disc playing.

General

Audio1 A2 Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

English

French

German

Italian

—

General

Audio1 A2 Video1 V2 Language

Spanish

Other

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

w/ Subtitle Language

English

French

German

Italian

Setup disc's subtitle language

SETUP

Move

Exit

Spanish

Other

Settings: English (Factory setting)

French

German

Italian

SETUP

Move

Exit

Settings: w/ Subtitle Language (Factory setting)

Spanish

English

Other (For details on how to select other languages,

see ‘When [Other] is selected’ on page 55.)

French

German

Italian

Spanish

Note

The menu settings may be different from those shown above.

Other (For details on how to select other

languages, see ‘When [Other] is selected’ on page

55.)

I Setting Auto Language to control subtitle

and audio language based on program

content

Notes

• The menu settings may look different from the one shown above.

• If this function is not effective, the languages that can be selected

may also be selected in the DVD menu. Press MENU to open the

DVD menu and make your selection accordingly.

When the Auto Language function is used, foreign movies are

shown with the original audio soundtrack and subtitles in the

language selected in the [Subtitle Language] menu option.

Domestic films are shown with the original audio soundtrack

and no subtitles. (This setting may not be effective with all

DVD discs.)

Make changes to the [Auto Language] setting in the Setup

screen Language menu.

You cannot make this setting with a disc playing.

General

Audio1 A2 Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

English

—

Off

Play dialog, etc. in original language

Subtitle ON with foreign audio

SETUP

Move

Exit

Settings: On (Factory setting)

Off

Note

The Auto Language function operates only when this function

is set to [On], and the language set for the [Audio Language]

and [Subtitle Language] settings is the same.

Download from Www.Somanuals.com. All Manuals Search And Download.

I Selecting subtitles, assist subtitles or no

I When [Other] is selected

When you want to select one of the 136 languages as the

main audio language, follow the steps below when the

following screen appears.

subtitles ^Expert

Use this function to turn the subtitles on or off. Additionally,

some DVDs provide assist subtitles that provide additional

explanations of scenes in addition to the standard subtitles for

viewers who are hard of hearing. Select [Assist Subtitle] to

display these subtitles on DVDs where this function is offered.

Make changes to the [Subtitle Display] setting in the Setup

screen Language menu in the [Expert] menu mode (page 43).

You cannot make this setting with a disc playing.

A language code list can be found on page 56.

General

Audio1 A2 Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

English

French

German

Italian

Spanish

Other

Setup audio language

General

Audio1 A2 Video1 V2 Language

SETUP

ENTER

Move

Select

Exit

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

English

Off

—

1 Use the cursor buttons to select [Other] and press ENTER.

The language selection screen appears.

General

Audio1 A2 Video1 V2 Language

Audio Language

Assist Subtitle

SETUP

Move

Exit

List of Language

Code (0~2)

en: English

Settings: On (Factory setting)

Off

Setup audio language

RETURN

SETUP

Assist Subtitle

Return

Exit

+/–

Move

ENTER

Select

Notes

• If there is no subtitle information recorded on the DVD, no

subtitles are displayed even if this function is set to [On].

• This setting serves as a default as whether or not to display

subtitles. Even if this option is set to [Off], subtitles can be

displayed by pressing SUBTITLE. Similarly, if this option is set to

[On], the subtitles can be turned off by pressing SUBTITLE and

then CLEAR.

2 Use the cursor buttons (2/3) to select either “List of

Languages” or “Code”.

3 If you select “List of Languages”, use the cursor buttons

(5/∞) to select the language.

For languages which are only shown as a code, please refer to

‘Language Code List’ on page 56.

List of Languages

ja: Japanese

I Forcing subtitles to be displayed ^Expert

Even when the subtitles are turned off, some DVDs will

nevertheless display them on the screen. This setting allows

you to select the language of the subtitles to be displayed with

this type of DVD.

Select [With Audio] to display the subtitles in the same

language as the currently selected Audio Language. Select

[Selected Subtitle] to display the subtitles in the language set

in the [Subtitle Language] setting.

If you select “Code”, use the cursor buttons (5/∞) to input

the numbers of the input code.

Use the cursor buttons (2/3) to change the position of the

cursor. You can also use the number buttons to enter the code.

Code (0~2)

Make changes to the [Subtitle Off] setting in the Setup screen

Language menu in the [Expert] menu mode (page 43).

You cannot make this setting with a disc playing.

General

Audio1 A2 Video1 V2 Language

4 Press ENTER to set the new language.

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

English

—

To exit the screen without making any changes, press RETURN.

English

With Audio

Selected Subtitle

—

SETUP

Move

Exit

Settings: With Audio

Selected Subtitle (Factory setting)

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Language Code List

Language codes are used when setting the audio and subtitle

language preferences (page 53, 54).

Language

Input-code

Language

Input-code

Language

Input-code

Japanese (ja)

English (en)

French (fr)

1001

0514

0618

0405

0920

0519

2608

1412

1620

1922

1821

1115

0512

0101

0102

0106

0113

0118

0119

0125

0126

0201

0205

0207

0208

0209

0214

0215

0218

0301

0315

0319

0325

0401

0426

0515

0520

0521

0601

0609

0610

0615

0625

0701

0704

0712

0714

Gujarati (gu)

Hausa (ha)

0721

0801

0809

0818

0821

0825

0901

0905

0911

0914

0919

0923

1009

1023

1101

1111

1112

1113

1114

1119

1121

1125

1201

1214

1215

1220

1222

1307

1309

1311

1312

1314

1315

1318

1319

1320

1325

1401

1405

1415

1503

1513

1518

1601

1612

1619

1721

Rhaeto-Romance (rm)

Kirundi (rn)

Romanian (ro)

Kinyarwanda (rw)

Sanskrit (sa)

Sindhi (sd)

1813

1814

1815

1823

1901

1904

1907

1908

1909

1911

1912

1913

1914

1915

1917

1918

1919

1920

1921

1923

2001

2005

2007

2008

2009

2011

2012

2014

2015

2018

2019

2020

2023

2111

2118

2126

2209

2215

2315

2408

2515

2621

Hindi (hi)

German (de)

Italian (it)

Croatian (hr)

Hungarian (hu)

Armenian (hy)

Interlingua (ia)

Interlingue (ie)

Inupiak (ik)

Spanish (es)

Chinese (zh)

Dutch (nl)

Sangho (sg)

Serbo-Croatian (sh)

Sinhalese (si)

Slovak (sk)

Portuguese (pt)

Swedish (sv)

Russian (ru)

Korean (ko)

Greek (el)

Indonesian (in)

Icelandic (is)

Hebrew (iw)

Yiddish (ji)

Slovenian (sl)

Samoan (sm)

Shona (sn)

Afar (aa)

Javanese (jw)

Georgian (ka)

Kazakh (kk)

Somali (so)

Albanian (sq)

Serbian (sr)

Siswati (ss)

Sesotho (st)

Sundanese (su)

Swahili (sw)

Tamil (ta)

Abkhazian (ab)

Afrikaans (af)

Amharic (am)

Arabic (ar)

Greenlandic (kl)

Cambodian (km)

Kannada (kn)

Kashmiri (ks)

Kurdish (ku)

Kirghiz (ky)

Assamese (as)

Aymara (ay)

Azerbaijani (az)

Bashkir (ba)

Byelorussian (be)

Bulgarian (bg)

Bihari (bh)

Telugu (te)

Latin (la)

Tajik (tg)

Lingala (ln)

Thai (th)

Laothian (lo)

Lithuanian (lt)

Latvian (lv)

Tigrinya (ti)

Turkmen (tk)

Tagalog (tl)

Bislama (bi)

Bengali (bn)

Tibetan (bo)

Breton (br)

Malagasy (mg)

Maori (mi)

Setswana (tn)

Tonga (to)

Catalan (ca)

Corsican (co)

Czech (cs)

Macedonian (mk)

Malayalam (ml)

Mongolian (mn)

Moldavian (mo)

Marathi (mr)

Malay (ms)

Turkish (tr)

Tsonga (ts)

Tatar (tt)

Welsh (cy)

Twi (tw)

Danish (da)

Bhutani (dz)

Esperanto (eo)

Estonian (et)

Basque (eu)

Persian (fa)

Finnish (fi)

Ukrainian (uk)

Urdu (ur)

Maltese (mt)

Burmese (my)

Nauru (na)

Uzbek (uz)

Vietnamese (vi)

Volapük (vo)

Wolof (wo)

Xhosa (xh)

Nepali (ne)

Norwegian (no)

Occitan (oc)

Oromo (om)

Oriya (or)

Fiji (fj)

Yoruba (yo)

Zulu (zu)

Faroese (fo)

Frisian (fy)

Irish (ga)

Panjabi (pa)

Scots-Gaelic (gd)

Galician (gl)

Guarani (gn)

Polish (pl)

Pashto, Pushto (ps)

Quechua (qu)

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Parental Lock Level

This player lets you set the Parental Lock if the DVD has a

parental lock level recorded on it. With Parental Lock capable

discs, you can block access to material you feel is

inappropriate for your children. Refer to the DVD disc jacket

and the accompanying documentation to see if a particular

disc contains a parental lock level.

Make changes to the [Parental Lock] setting in the Setup

screen General menu. Please note that changes to the

Parental Lock level cannot be made when a disc is playing.

Stop playback of the disc before attempting to make any

changes.

I Entering the Password

When you select either [Level] or [Country Code], it is

necessary to register the password (4-digit code number).

You’ll be asked to confirm your existing password before

registering a new one. Use the following steps at any time you

are asked to enter or confirm your password.

1 Use the cursor buttons (5/∞) or the number buttons to

select a number between 0 and 9.

You can also use the number buttons to enter the numbers

directly. When entering your password for the first time, or

changing it, you will be asked to reenter your password. When

using the number buttons to confirm the password, the numbers

appear as asterisks, and the cursor advances automatically to

the next position.

You cannot select [Level] or [Country Code] until you have

registered a password. Select [Password] to register a new

password. See ‘Entering the password’ on the this page for

how to register a new password.

Audio1

V2 Language

General

A2 Video1

Prental Lock: Register Code Number

Audio1

V2 Language

General

A2 Video1

Setup Menu Mode — Basic

Setup Navigator

Parental Lock — Password

Level

Enter 4—Digit Code

Country Code

RETURN

Return

Exit

+/–

Move

Setup viewing restrictions

ENTER

SETUP

Move

Exit

2 Use the cursor buttons (2/3) to move the cursor to a

different position in the password.

Settings: Password

When all four numbers of the password have been entered,

ENTER appears on the screen.

(For information, refer to ‘Entering the Password’ on

the this page.)

Audio1

V2 Language

General

A2 Video1

Level

Prental Lock: Register Code Number

(For information, refer to ‘Setting the Parental Lock

Level’ on the following page.)

ENTER

Enter 4—Digit Code

Country Code

(For information, refer to ‘Setting the Country Code’

on the following page.)

RETURN

SETUP

Return

Exit

+/–

Move

3 Press ENTER to set the password.

The password is entered.

When a DVD with a set Parental Lock level is loaded

Playback cannot be started until the code number has been correctly

input by using the cursor buttons (2/3/5/∞) or the number buttons,

and ENTER has been pressed.

Notes

• Be sure not to forget your password. If you should forget it, reset

the system, and enter a new password. To reset the system, see

‘Resetting the Player to System Settings’ (page 60). Please note

that this procedure resets the system, and clears all saved

settings, not just the password.

• Some discs lock out violent scenes. Refer to instruction notes on

discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Audio and Video Settings

Setting the Parental Lock Level

I Setting the Parental Lock Level

I Setting the Country Code

Change the Parental Lock level to a higher or lower level

according to the settings printed on the DVD disc jacket or

accompanying documentation. If you use the Condition

Memory function to save the settings for a particular disc, the

Parental Lock level is saved as well. Because it is saved in

memory, Parental Lock levels can be set for individual discs

according to their content rather than a set level for all DVDs.

1 Select [Level] in the [Parental Lock] setting and press

ENTER.

Change your Country Code whenever you feel it is necessary.

However, if you forget your existing password, you cannot

enter this screen to change it.

1 Select [Country Code] in the [Parental Lock] setting and

press ENTER.

The screen changes to the password input screen. To enter the

password, refer to ‘Entering the Password’ on the previous page.

The Country Code selection screen appear.

General

Audio1 A2 Video1 V2 Language

Country Code

The screen changes to the password input screen. You cannot

select [Level] until you have registered a password. To enter the

password, refer to ‘Entering the Password’ on the previous page.

List of Codes

Code (0~2)

Audio1

V2 Language

General

A2 Video1

Setup Country Code

Parental Lock: Level Change

RETURN

SETUP

Return

Exit

+/–

Move

ENTER

Select

Level

Off

2 Use the cursor buttons (2/3) to select either “List of

Codes” or “Code”.

3 If you select “List of Codes”, use the cursor buttons (5/∞)

to select the country.

Set Parental Lock Level

RETURN

SETUP

Select

Return

Exit

ENTER

Move

2 Use the cursor buttons (2/3) to adjust the Parental Lock

Level.

The lock icons appear “unlocked” up to the selected level to

indicate that access is available.

3 Press ENTER to set the new level.

For country codes which are only shown as a code, please refer

to ‘Country Code List’ on page 59.

List of Codes

The new Parental Lock level is set and the screen returns to the

General menu screen. To go back to the General menu screen

without making any changes, press RETURN.

If you select “Code”, use the cursor buttons (5/∞) to input

the numbers of the input code.

Use the cursor buttons (2/3) to change the position of the

I Changing the Password

Change your password whenever you feel it is necessary.

However, if you forget your existing password, you cannot

enter this screen to change it.

cursor. You can also use the number buttons to enter the code.

Code (0~2)

1 Select [Password Change] in the [Parental Lock] setting

and press ENTER.

The screen changes to the password input screen. To enter the

password, refer to ‘Entering the Password’ on the previous page.

2 Use the cursor buttons (2/3/5/∞) or the number buttons to

enter the new password.

4 Press ENTER to set the new Country Code.

To exit the screen without making any changes, press RETURN.

3 When the new password has been entered, press ENTER.

The new password is set and the screen returns to the General

menu screen. To go back to the General menu screen without

making any changes, press RETURN.

Download from Www.Somanuals.com. All Manuals Search And Download.

Country Code List

Other Settings

Expert

I Auto Disc Menu

Country

Input-code Country-code

This specifies whether the menu (Top menu) is automatically

displayed after loading a disc. Set to [On] if you want the

menu displayed automatically, or [Off] if you don’t want it

displayed.

0118

0121

0120

0205

0218

0301

ARGENTINA

AUSTRALIA

AUSTRIA

Audio1

V2 Language

General

A2 Video1

BELGIUM

Setup Menu Mode — Expert

Setup Navigator

Parental Lock — Off (us)

Bonus Group

BRAZIL

CANADA

Auto Disc Menu — On

0312

0314

CHILE

Group Playback

Off

CHINA

SETUP

Move

Exit

0411

0609

0618

0405

0811

0914

0904

0920

DENMARK

FINLAND

Settings: On (Default setting)

FRANCE

Off

GERMANY

HONG KONG

INDIA

Note

Some DVD discs display a menu automatically regardless of

this setting. If you press £while a disc is loading, this setting

is ignored.

INDONESIA

ITALY

1016

JAPAN

1118

1325

1324

KOREA, REPUBLIC OF

MALAYSIA

MEXICO

Expert

I Group Playback

DVD-Audio discs can have up to 9 groups of tracks. When set

to [Single], the selected group plays and then the disc stops, or

returns to the menu screen. Use Group Search (page 26) to

select the group to play. (You cannot use the track skip 4/

¢or scan buttons 1/¡in this mode.)

1412

1426

1415

1611

NETHERLANDS

NEW ZEALAND

NORWAY

PAKISTAN

Set to [All] if you want to play all the groups on a disc

consecutively.

1608

1620

1821

1907

0519

1905

PHILIPPINES

PORTUGAL

RUSSIAN FEDERATION

SINGAPORE

SPAIN

Audio1

V2 Language

General

A2 Video1

Setup Menu Mode — Expert

Setup Navigator

Parental Lock — Off (us)

Bonus Group

SWEDEN

Auto Disc Menu — On

Group Playback

All

Single

0308

2023

SWITZERLAND

TAIWAN, PROVINCE

OF CHINA

SETUP

Move

Exit

2008

0702

2119

THAILAND

UNITED KINGDOM

UNITED STATES OF

AMERICA

Settings: All

Single (Default setting)

Note

Even if the players is set to [All] but you select a group to play

from the disc menu, only that group will play.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

ON/STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

Adjusting Audio and Video Settings

VOL

ENTER

SETUP

2/3/5/∞

ENTER

VOL

RETURN

TV/VCR

SETUP

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

FUNCTION M

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

Memorizing settings (Function

Memory)

Recalling memorized settings

FUNCTION M

Up to 5 settings can be memorized.

Press FUNCTION M.

Only memorized settings are displayed.

SETUP

Press SETUP.

The Setup screen appears.

Use the cursor buttons (5/∞) to

select the menu to be recalled.

Use the cursor buttons (2/3) to

select the menu you want.

Press ENTER.

ENTER

Use the cursor buttons (5/∞) to

select the setting to be memorized.

As each menu is selected with the cursor,

the settings appear below the menu

heading.

ENTER

Press ENTER.

Resetting the Player to System Settings

To reset the player, press and hold Stop on the front

panel.Then press Standby/On to turn the unit from

standby to on.

All program memory, saved settings from functions such as

Video Memory, Last Memory and Condition Memory are

cleared, TV System is reset to AUTO and all Setup screen

menus are returned to factory settings.

FUNCTION M

Press FUNCTION M.

“FM” will appear on the screen, and the

setting will be memorized.

I To clear the Function Memory

Press FUNCTION M. again

Note

Some settings cannot be memorized.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPEN

/CLOSE

Others

ON/STANDBY

STANDBY

STANDBY ANGLE

AUDIO SUBTITLE

LAST

COND.M DIMMER DISPLAY

TOP MENU

Pre-programming remote controller

VOL +/–

CH +/–

VOL

ENTER

VOL

RETURN

TV/VCR

SETUP

TV/VCR

PAUSE

STOP

PLAY

DOWN

STEP/SLOW

FUNCTION

Number buttons

SEARCH CLEAR

RANDOM REPEAT

PROGRAM

REMOTE CONTROLLER RC 451DV

DVD TV

DVD/TV

Learning a pre-programming code

Controlling a TV

You can make RC-451DV remote controller to operate a TV

from other brand than Integra/ONKYO by storing the pre-

programming code of the brand in the RC-451DV.

DVD

Set the DVD/TV switch to TV.

DVD

Set the DVD/TV switch to TV.

Press the ON button to turn on the

device.

Find the 2-digit number for the brand

name of the component that you want

to operate in the table on page 56.

Press the desired operation button.

CH+

: Changes the TV channel

upward.

Turn on the TV that you want to

operate.

CH–

: Changes the TV channel

downward.

TV VOL+ : Increases the TV volume.

TV VOL– : Decrease the TV volume.

TV/VCR : Switches the TV/VCR inputs.

STANDBY

While holding down the STANDBY

button on the RC-451DV that you

want to program, press the ENTER

button, and then release both

buttons.

ENTER

Within 30 seconds, enter the 2-digit

code number.

Press some operation buttons for

the component that you want to

operate to check if the system

operates properly.

If the system operates properly, the code is

correct. If the component does not operate

properly, return to step 3.

Notes

• With some brand’s components, some buttons may not work

correctly.

• If more than one code is given in the table, try the code one by

one until you reach the code for your component (i.e. if the first

code does not work, then try the next).

• The code can be retained by changing the batteries within 1

minute. If the code is lost, store the pre-programming code again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pre-programming remote controller

Pre-programming Code List

Brand

ADMIRAL

Code

01-03

AOC

BELL & HOWELL

BROKSONIC

CRAIG

01, 02

05-08

CROSLEX

CURTIS MATHIS

DAEWOO

DAYTRON

EMERSON

FISHER

04, 08, 10

04, 11, 12

04-08, 13, 14

03, 04, 16-18

04, 13, 19

04, 13, 20, 21

03, 04, 17, 19

GOLDSTAR

HITACHI

JC PENNEY

JVC

KTV

04, 08, 13

03, 09, 10, 15

04, 09, 13

04, 23

LXI

MAGNAVOX

MITSUBISHI

NEC

PANASONIC

PHILCO

16-18, 24

04, 09, 13

PHILIPS

PIONEER

PORTLAND

PROSCAN

QUASAR

RADIO SHACK

RCA

10, 18, 25

04, 26

17, 18

03, 04, 08, 23

03, 04, 17, 26-28

04, 13, 29

SAMSUNG

SANYO

SCOTT

04, 08

SHARP

02, 13, 14

01, 02

SIGNATURE 2000

SONY

SYLVANIA

SYMPHONIC

TOSHIBA

VIDTECH

WARDS

04, 09

02, 10

04, 20

04, 13, 14

02, 23

YAMAHA

ZENITH

01, 31

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective

instruction manuals of the connected components and TV.

Symptoms

Causes

Remedies

Pages

The DVD Player doesn’t

• The mains lead is disconnected.

• Check the connection of the mains lead.

switch on.

• The main power is set to OFF.

• There is external noise in the computer

circuits of the DVD Player.

• Turn on the main power.

–

• Switch off the main power, then switch it

on again. If not recovered, disconnect the

mains lead, then connect it again.

• Contact your nearest Integra/ONKYO

service center.

• The AC fuse is blown.

–

The disc tray comes back

out automatically, shortly

after the disc tray is closed. • The disc is dirty or warped.

• Region number does not conform with

• The disc is not placed properly on the disc • Use the disc tray guide to align the disc.

tray.

• Refer to ‘Notes on Discs’.

• If the region number on the disc does not

match the number on the player, the disc

cannot be used

this unit.

The DVD Player does not

start playback.

• No disc is inserted.

• Insert a disc. (Check that “DVD,” “VCD,”

or “CD” is lit in the DVD Player’s display.)

• Check the playable discs.

• Place the disc with the playback side

down.

• An unplayable disc is inserted.

• The disc is placed upside down.

• The disc is not placed within the disc tray

guide.

• The disc is dirty.

• Place the disc within the proper guide on

the disc tray.

• Eject the disc and clean it.

• The parental lock function is activated.

• Deactivate the parental lock function or

change the parental lock level.

57-59

The playback picture is

occasionally distorted.

• The disc is dirty.

• It is in fast forward or fast reverse

playback.

• Eject the disc and clean it.

• Sometimes a small amount of picture

distortion may appear. This is not a

malfunction.

–

Brightness is unstable or

noise is visible on the

playback picture.

• Copy protection is activated.

• Connect the DVD Player directly to the

TV. Avoid connecting the DVD Player to

the TV through a VCR.

13, 14

The picture from the DVD

Player doesn’t appear on

the TV screen.

• The TV is not set to receive the output

signals from the DVD Player.

• The DVD Player is not properly

connected.

• Set the TV to the DVD Player’s input.

–

• Check the connections to the DVD Player. 13, 14

Settings are canceled.

• When the power is turned off by power

failure or by unplugging the power cord,

settings will be canceled.

• Before unplugging the power cord, press

Standby/On and check that “--OFF--”

disappears in the display.

–

Playback doesn’t follow the • The DVD Player is in repeat playback

• Resume normal playback.

28-33

course of the disc’s

programs.

mode, memory playback mode, or

random playback mode, etc.

The buttons on the remote • Power supply fluctuations or other

• Switch off the main power, then switch it

on again. If not recovered, disconnect the

mains lead, then connect it again.

controller and DVD Player

do not operate.

abnormalities such as static electricity

may interrupt correct operation.

mark appears on

screen.

• The selected function does not operate

for that disc.

–

mark appears on

screen.

• The operation is prohibited by the player.

–

When making changes in

the Setup screen menus,

is displayed.

• There is a Video CD, CD or MP3 loaded

in the player and the setting that was

changed only applies to DVD

performance.

• The setting will be effective the next time

a DVD is loaded.

Some settings in the Setup • The [Setup Menu Mode] is set to [Basic].

Set the [Setup Menu Mode] to [Expert].

Menu do not appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Pages

Symptoms

Causes

Remedies

No sound is reproduced.

• The Setup screen Audio menu [Linear PCM • Either connect using the analog outputs,

Out] setting is set to [Down Sample Off].

or set [Linear PCM Out] in the Audio

menu to [Down Sample On].

• Set [Digital Out] to [On].

• The Setup screen Audio menu [Digital

Out] is set to [Off].

44, 45

• A wrong sound signal conversion method • Check the current sound signal

is selected.

conversion method, and select the right

setting.

–

• The pause mode is engaged.

• The volume level of TV or amplifier is set

to minimum.

• The DVD or CD is recorded in DTS audio. • DTS audio is only output from the digital

output jacks. Connect the digital output on

the player to the digital input on a receiver

or amplifier with a built in DTS decoder to

• Press £or 8to exit the pause mode.

• Increase the volume level.

hear DTS audio.

The screen is stretched or

aspect does not change.

• The multi aspect setting is not

appropriate.

• Change the aspect setting in the [TV

Screen] setting in the Setup screen Video

1 menu to the screen type most

appropriate to the TV or monitor you are

using.

• If you connected your TV with an S-Video

cord, in rare cases the TV picture may

appear stretched. In this case switch the

output from [S2] to [S1]

• The TV is connected with an S-video

cord.

Some MP3 tracks appear

to be missing from a disc.

• The track name does not end in “.mp3” or • This system will not recognize file that

“.MP3”.

does not end in ".mp3" or ".MP3" as an

MP3 track. Change the track name.

• This player only recognizes the first 250

folders and tracks on a disc. If there are

more folders/tracks than this, you will not

be able to play them.

• More than 251 folders and tracks are

recorded on a disc.

• A multi-session disc is inserted.

• This player is not compatible with multi-

session discs. If the disc is multi-session,

you will only be able to play tracks

recorded onto the first session.

The buttons on the DVD

Player operates but the

buttons on the remote

controller do not operate.

• No batteries are inserted in the remote

controller.

• The batteries are worn out.

• Insert new batteries.

• Replace with new batteries.

• The remote controller is not pointed at the • Point the remote controller at the remote

remote sensor of the DVD Player.

• The remote controller is too far from the

DVD Player.

sensor of the DVD Player.

• Operate the remote controller within 5 m.

Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static

electricity. If this happens, press the Power switch on the unit and then press it again after about five seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

DVD Player

Power supply

AC 120 V, 60 Hz

Power consumption

Weight

16 W

3.6 kg, 7.9 lbs.

External dimensions

Signal system

435 × 91 × 314 mm (W/H/D), 17-1/8" × 3-9/16" × 12-3/8"

Standard NTSC

Regional restriction code

Laser

Semiconductor laser, wavelength 650 nm

Frequency range (digital audio)

DVD linear sound:

48 kHz sampling 4 Hz to 22 kHz

96 kHz sampling 4 Hz to 44 kHz

192 kHz sampling 4 Hz to 96 kHz

4 Hz to 20 kHz

DVD-Audio:

Audio CD:

Signal-to-noise ratio (digital audio)

Audio dynamic range (digital audio)

Harmonic distortion (digital audio)

Wow and flutter

More than 106 dB

More than 100 dB

Less than 0.005 %

Below measurable level (less than 0.001 % (W.PEAK))

Operating conditions

Temperature: 5°C to 35°C, Operation status: Horizontal

Outputs

Video output

1.0 V (p-p), 75 Ω, negative sync., pin jack × 2

S-video output

(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 2

Component video output

(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 2

(PB)/(PR) 0.7 V (p-p), 75 Ω

Audio output (digital output Optical)

Audio output (digital output Coaxial)

Audio output (analog audio)

Optical connecter × 2

0.5 V (p-p), 75 Ω, pin jack × 1

2.0 V (rms), 470 Ω, pin jack (L, R) × 2

Audio output (5.1 channel analog audio) 2.0 V (rms), 470 Ω, pin jack (FRONT L, FRONT R, CENTER, SURR L,

SURR R, SUB WOOFER) × 1

Specifications and features are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Integra Division of

ONKYO U.S.A. CORPORATION

18 park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com

Integra Division of

ONKYO CORPORATION

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8111 Fax: 072-833-5222

W0107-1

SN 29343135

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Washer Dryer XWDE 961480 User Manual
JBL Speaker System EON 510 User Manual
Jenn Air Double Oven JJW2327 User Manual
Jet Tools Lathe GH 1340W User Manual
John Deere Drill ET 3505 J User Manual
JVC Camcorder LYT2308 002A M User Manual
JVC CRT Television 0305MKH CR MU User Manual
Kenwood Car Video System KDV 7241 User Manual
Keys Fitness Treadmill 502t User Manual
King Canada Planer KC 382C User Manual