Integra DVD Player DPS 52 User Manual

Contents  
Before Using Your DVD Player  
2
DVD Player  
Getting Started  
Basic Playback  
DPS-5.2  
Instruction Manual  
Advanced Playback  
Thank you for purchasing the Integra DVD  
Player.  
Function Setup  
Others  
Please read this manual thoroughly before  
making connections and plugging in the unit.  
Following the instructions in this manual will  
enable you to obtain optimum performance  
and listening enjoyment from your new Player.  
Please retain this manual for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
This unit contains a semiconductor laser system and is classified  
as a CLASS 1 LASER PRODUCT. So, to use this model  
properly, read this Instruction Manual carefully. In case of any  
trouble, please contact the store where you purchased the unit.  
To prevent being exposed to the laser beam, do not try to open  
the enclosure.  
The label on the right  
is applied on the rear  
panel except for USA  
and Canadian  
“CLASS 1 LASER  
PRODUCT”  
models.  
CAUTION:  
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK  
FAILED OR DEFEATED. DO NOT STARE INTO BEAM.  
1. This unit is a CLASS 1 LASER PRODUCT and employs a  
laser inside the cabinet.  
2. To prevent the laser from being exposed, do not remove  
the cover. Refer servicing to qualified personnel.  
CAUTION:  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR  
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES  
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
For U.S. model  
For Canadian model  
The laser is covered by a housing which prevents exposure during  
operation or maintenance. However, this product is classified as a  
Laser Product by CDRH (Center for Devices and Radiological  
Health) which is a department of the Food and Drug Administration.  
According to their regulations 21 CFR section 1002.30, all  
manufactures who sell Laser Products must maintain records of  
written communications between the manufacturer, dealers and  
customers concerning radiation safety. If you have any complaints  
about instructions or explanations affecting the use of this product,  
please feel free to write to the address on the back page of this  
manual. When you write us, please include the model number and  
serial number of your unit.  
NOTE: This class B digital apparatus complies with Canadian  
ICES-003.  
For models having a power cord with a polarized plug:  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE  
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
Modele pour les Canadien  
REMAQUE: Cet appareil numérique de la classe B est conforme  
à la norme NMB-003 du Canada.  
In compliance with Federal Regulations, the certification,  
identification and the period of manufacture are indicated on the rear  
panel.  
Sur les modeles dont la fiche est polarisee:  
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,  
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA  
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER  
JUSQUAU FOND.  
FCC INFORMATION FOR USER  
CAUTION:  
The user changes or modifications not expressly approved by the  
party responsible for compliance could void the users authority to  
operate the equipment.  
NOTE:  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
1. Regional Restriction Codes (Region Number)  
8. Notes on Handling  
Regional restriction codes are built into DVD Players and DVD-  
Video media for each sales region. If the regional code of the  
DVD Player does not match one of the regional codes on the  
DVD-Video, playback is not possible.  
When shipping the unit, use the original shipping carton and  
packing materials. For maximum protection, repack the unit as  
it was originally packed at the factory.  
Do not use volatile liquids, such as insect spray, near the unit.  
Do not leave rubber or plastic products in contact with the unit  
for a long time. They will leave marks on the finish.  
The regional number can be found on the rear panel of the DVD  
Player. (e.g.  
1
for Region 1)  
The top and rear panels of the unit may become warm after  
a long period of use.This is not a malfunction.  
2. About This Manual  
This manual explains the basic procedures for operating the  
DVD Player. Some DVD-Video discs do not support the full  
potential of the DVD technology. Your DVD Player may therefore  
not respond to all operating commands. Refer to instruction  
notes on discs.  
When the unit is not in use, be sure to remove the disc and  
turn off the power.  
If you do not use the unit for a long period, the unit may not  
function properly in the future. Turn on and use the unit  
occasionally.  
A “ ” mark may appear on the TV screen during operation. It  
means that the operation is not permitted by the DVD Player or  
the disc.  
9. To Obtain a Clear Picture  
The unit is a high technology, precision device. If the optical  
pick-up lens and disc drive parts are dirty or worn down, the  
picture quality becomes poor. To obtain a clear picture, we  
recommend regular inspection and maintenance (cleaning or  
parts replacement) every 1,000 hours of use depending on the  
operating environment. For details, contact your nearest dealer.  
3. Recording Copyright  
Recording of copyrighted material for other than personal use is  
illegal without permission of the copyright holder.  
4. Power  
10. Notes on Moisture Condensation  
WARNING  
Moisture condensation damages the unit.  
Please read the following carefully.  
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,  
READ THE FOLLOWING SECTION CAREFULLY.  
What is moisture condensation?  
The voltage of the available power supply differs according to  
country or region. Be sure that the power supply voltage of the  
area where the unit will be used meets the required voltage  
(e.g., AC 120 V, 60 Hz) written on the rear panel.  
Moisture condensation occurs, for example, when you pour a  
cold drink into a glass on a warm day. Drops of water form on  
the outside of the glass. In the same way, moisture may  
condense on the optical pick-up lens inside the unit, one of  
the most crucial internal parts of the unit.  
5. Do not touch the unit with wet hands  
Do not handle the unit or power cord when your hands are wet  
or damp. If water or any other liquid enters the case, take the  
unit to an authorized service center for inspection.  
Moisture condensation occurs in the following cases.  
When you bring the unit directly from a cold place to a  
warm place.  
When you use the unit in a room where you just turned on  
the heater, or a place where the cold wind from the air  
conditioner directly hits the unit.  
In summer, when you use the unit in a hot and humid place  
just after you move the unit from an air conditioned room.  
When you use the unit in a humid place.  
6. Location of the unit  
Place the unit in a well-ventilated location.  
Take special care to provide plenty of ventilation on all sides of  
the unit especially when it is placed in an audio rack. If  
ventilation is blocked, the unit may overheat and malfunction.  
Do not expose the unit to direct sunlight or heating units as  
the units internal temperature may rise and shorten the life of  
the pickup.  
Avoid damp and dusty places and places directly affected by  
vibrations from the speakers. In particular, avoid placing the  
unit on or above one of the speakers.  
Be sure the unit is placed in a horizontal position. Never place  
it on its side or on a slanted surface as it may malfunction.  
When you place the unit near a TV, radio, or VCR, the  
playback picture may become poor and the sound may be  
distorted. In this case, place the unit away from the TV, radio,  
or VCR.  
Do not use the unit when moisture condensation may  
occur.  
If you use the unit in such a situation, it may damage discs  
and internal parts. Remove the disc, connect the power cord  
of the unit to the wall outlet, turn on the unit, and leave it for  
two or three hours. After a few hours, the unit will have  
warmed up and evaporated any moisture. Keep the unit  
connected to the wall outlet and moisture condensation will  
seldom occur.  
7. Care  
From time to time you should wipe the front and rear panels and  
the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth  
in a weak solution of mild detergent and water, wring it out dry,  
and wipe off the dirt. Following this, dry immediately with a clean  
cloth.  
Do not use rough material, thinners, alcohol or other chemical  
solvents or cloths since these could damage the finish or remove  
the panel lettering.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Discs  
This section shows you how to handle, clean, and store discs.  
About VIDEO CDs  
Playable Discs  
This DVD Player supports VIDEO CDs equipped with the PBC  
(Version 2.0) function. (PBC is the abbreviation of Playback Control.)  
You can enjoy two playback variations depending on the type of disc.  
This DVD Player can playback the following discs.  
Disc mark  
VIDEO CD not equipped with PBC function (Version 1.1)  
Sound and movies can be played on this DVD Player in the  
same way as an audio CD.  
VIDEO CD equipped with PBC function (Version 2.0)  
In addition to operation of the VIDEO CD not equipped with the  
PBC function, you can enjoy playback with interactive software  
and search function using the menu displayed on the TV  
screen (Menu Playback). Some of the functions described in  
this Instruction Manual may not work with some discs.  
DVD videos  
VIDEO CDs  
*1  
*1  
MP3 compatibility information  
Audio CDs  
The CD-ROM must be ISO 9660 compatible.  
Files should be MPEG1 Audio Layer 3 format, 44.1 or  
48kHz, fixed bit-rate. Incompatible files will not play and  
UNPLAYABLE MP3 FORMATwill be displayed.  
Not compatible with variable bit-rate (VBR) files.  
This system only plays tracks that are named with the file  
extension .mp3or .MP3.  
This system is not compatible with multi-session discs. If  
you try an play a multi-session disc, only the first session  
will be played.  
Use CD-R or CD-RW media for recording your MP3 files.  
The disc must be finalized in order to play.  
Audio encoded at 128Kbps should sound close to regular  
audio CD quality. Although this system will play lower bit-  
rate MP3 tracks, the sound quality becomes noticeably  
worse at lower bit-rates.  
*1 This unit can play CD-R and CD-RW discs recorded in CD  
Audio or Video CD format, or with MP3 audio files.  
You cannot playback discs other than those listed above.  
You cannot play discs such as CD-ROM, DVD-RAM, DVD-  
RW, etc., even if the marks in the above table are labeled  
on those discs.  
This DVD Player uses the PAL/NTSC color system, and  
cannot playback DVD videos recorded in any other color  
system (SECAM, etc.).  
Avoid using heart-shaped or octagonal discs. Playing  
irregularly shaped discs may damage the internal  
mechanism of the DVD Player.  
Only the first 8 characters of folder and track names  
(excluding the .mp3extension) are displayed.  
This system can recognize a maximum of 250 folders and  
250 tracks. Discs containing more than 250 folders or tracks  
will not play.  
Do not use discs that have residue from adhesive tape,  
rental discs that have peeling labels, or discs that have  
custom labels or stickers. Otherwise, you may not be able  
to eject the discs or the DVD Player may become  
inoperative.  
Notes on Copyright  
It is forbidden by law to copy, broadcast, show, broadcast on  
cable, play in public, and rent copyrighted material without  
permission.  
DVD videos are copy protected, and any recordings made from  
these discs will be distorted.  
The Structure of the Disc Content  
DVD-Video  
This product incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
Normally, the contents of DVD-Video are divided into titles,  
and the titles are subdivided into chapters.  
Title 2  
Title 1  
Chapter 1  
Chapter 1  
Chapter 2  
Chapter 2  
Chapter 3  
Video CD/CD  
Video CD and CD are divided into tracks.  
Track 1 Track 2  
Track 4  
Track 5  
Track 3  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Discs  
Handling Discs  
Do not touch the playback side of the disc.  
Playback side  
Do not attach paper or tape to discs.  
Cleaning Discs  
Fingerprints and dust on the disc cause picture and sound  
deterioration. Wipe the disc from the center outwards with a  
soft cloth. Always keep the disc clean.  
If you cannot wipe off the dust with a soft cloth, wipe the disc  
lightly with a slightly moistened soft cloth and finish with a  
dry cloth.  
Do not use any type of solvent such as thinner, benzine,  
commercially available cleaners or antistatic spray for vinyl  
LPs. It may damage the disc.  
Storing Discs  
Do not store discs in a place subject to direct sunlight or  
near heat sources.  
Do not store discs in places subject to moisture and dust  
such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing objects  
on discs outside of their case may cause warping.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Safeguards/Precautions/Notes on Discs/Table of Contents ............. 27  
Getting Started  
Features/Supplied Accessories............................................................................. 8  
Preparing the Remote Controller .......................................................................... 9  
Index to Parts and Controls ................................................................................ 10  
Connecting to a TV ............................................................................................. 13  
Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) ...... 14  
Connecting the Power/Turning on the DVD Player ............................................. 15  
Setting Up the Player .......................................................................................... 16  
Basic Playback  
Getting Started Using Your DVD Player.............................................................. 19  
Advanced Playback  
Still Frame/Slow Play .......................................................................................... 23  
Locating a Specific Title/Folder/Chapter/Track/Location ..................................... 24  
Repeat Play ........................................................................................................ 26  
Random Play ...................................................................................................... 27  
Playing in a Favorite Order ................................................................................. 28  
Selecting the Camera Angle ............................................................................... 32  
Selecting the Audio/Subtitle Language ............................................................... 33  
Continuing Playback from a Specified Location (Last Memory) ......................... 34  
Memorizing Settings for Often Viewed DVDs (Condition Memory)..................... 35  
Viewing Disc Information..................................................................................... 36  
Function Setup  
Adjusting Audio and Video Settings .................................................................... 38  
Others  
Pre-programming remote controller .................................................................... 55  
Troubleshooting .................................................................................................. 57  
Specifications ...................................................................................................... 59  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Features/Supplied Accessories  
Features  
DTS*1/Dolby Digital*2/MPEG2/PCM Digital Audio Outputs  
Advanced 96-kHz/24-Bit D/A Converters  
Video CD Capability  
27-MHz/10-bit Video D/A Conversion  
1
*
“DTS” and “DTS Digital Surround” are  
Audiophile-Grade Audio Performance  
Composite Outputs/Component Video Output  
High Resolution On-screen Display  
Full-Function Remote Control Supplied  
Powerful preprogrammed remote  
Direct Digital Path  
trademarks of Digital Theater Systems, Inc.  
Manufactured under license from Dolby  
Laboratories.  
“Dolby” and the double-D symbol Ÿ are  
trademarks of Dolby Laboratories. Confidential  
Unpublished Works. ©1992-1997 Dolby  
Laboratories, Inc. All rights reserved.  
2
*
Heavy-duty power cord  
Supplied Accessories  
Make sure your box contains everything listed below.  
The number of accessories is indicated in brackets.  
S-video cable [1]  
Remote controller (RC-451DV) [1]  
Batteries (size AA/UM-3) [2]  
Audio/video connection cable [1]  
z cable [1]  
Power cord [1]  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing the Remote Controller  
Inserting the Batteries  
Using the Remote Controller  
Point the remote controller toward the remote control  
sensor.  
1
Open the battery compartment cover.  
Remote control sensor  
30˚  
30˚  
2
Insert the two R6 (size AA) batteries.  
Be sure to match the + and ends of the batteries  
with the diagram inside the battery compartment.  
Notes  
Place the unit away from strong light such as direct sunlight or  
inverted fluorescent light which can prevent proper operation of the  
remote controller.  
Using another remote controller of the same type in the same room  
or using the unit near equipment which uses infrared rays may  
cause operational interference.  
Do not put any object such as a book on the remote controller. The  
buttons of the remote controller may be pressed by mistake and  
drain the batteries.  
3
Close the battery compartment cover.  
Make sure the audio rack doors do not have colored glass. Placing  
the unit behind such doors may prevent proper remote controller  
operation.  
If there is any obstacle between the remote controller and the  
remote control sensor, the remote controller will not operate.  
Notes  
Do not mix new batteries with old batteries or different kinds of  
batteries.  
To avoid corrosion, remove the batteries if the remote controller is  
not to be used for a long time.  
Remove dead batteries immediately to avoid damage from  
corrosion. If the remote controller does not operate smoothly,  
replace both batteries at the same time.  
The life of the batteries supplied is about six months but this will  
vary depending on usage.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index to Parts and Controls  
For operational instructions, see the page indicated in brackets [ ].  
I Front panel  
6
7
8 9 0  
-
=
~
1
2
3
4
5
Standby/On  
Open/Close  
Stop  
Play  
Pause  
Last Memory  
Clear  
Top Menu  
Menu  
Setup  
Cursor  
Standby  
Power  
Return  
Repeat  
Random  
Display  
Push to Enter  
On  
Off  
-
DPS 5.2  
!
@
#
$
%
^
1 Power switch and Standby indicator [15]  
8 Cursor (2/3/5/) button/Enter button  
Turns on the main power supply for the DPS-5.2. The DPS-5.2  
enters standby state and the Standby indicator lights up. Pressing  
the switch again to the off position (Off) shuts down the main  
power supply into the DPS-5.2.  
Before turning on the power, make sure all cables are properly  
connected.  
[16, 19, 20, 25, 27-31, 37, 38, 44, 45, 49, 51, 52, 54]  
Use 2/3/5/to move through the options on menu screens and  
to change settings. Use Enter to implement settings selected with  
the cursor buttons or to set items highlighted in a menu.  
9 Menu button [20, 25, 32, 33, 48]  
Use to display or close the DVD menu or MP3 Navigator screen.  
2 Standby/On button [15, 16, 19, 22, 38, 54]  
When Standby/On button is pressed to On while the Power  
switch is set to On, the DPS-5.2 turns on and the Standby  
indicator turns off. Pressing the button again returns the DPS-5.2  
to the standby state.  
0 Open/Close button [19, 22]  
Press to open and close the disc tray.  
- Pause button [23]  
Press during playback to pause. Press again to resume playback.  
= Stop button [16, 20, 22, 28, 30, 34]  
3 Last Memory button [34]  
Press to stop playback. Pressing once enables playback to  
resume from a point shortly before the location where it stopped.  
Pressing twice causes the disc to return to the beginning of the  
disc if playback starts again.  
You can resume DVD or Video CD playback from the point you  
last watched even if the disc is removed from the player. Press  
Last Memory during playback to set a Last Memory point. When  
you want to resume playback of that disc, press Last Memory in  
the stop mode and playback starts from the memorized point.  
Last Memory locations can be stored for up to 5 DVDs and 1  
Video CD.  
~ Play button [19, 21-24, 26-28, 30, 34]  
Press to start or resume playback.  
! Repeat button [26]  
Use to set the repeat mode.  
@ Random button [27]  
Press to play chapters/tracks in random order.  
# Return button [20, 38, 49, 52]  
4 Clear button [25-30, 33-35, 49]  
Works in conjunction with a number of player functions. Use to  
cancel repeat and random playback, and to edit programs.  
5 Remote control sensor [9]  
Point the remote control toward the remote sensor to operate the  
player.  
6 Disc tray [19]  
When loading a disc, place discs in the disc tray with the label  
side facing up.  
7 Top Menu button [20, 24]  
Use to go one menu back (current settings are maintained). Use  
RETURN when you do not want to change the option setting in a  
menu.  
$ Setup button [16, 38, 39, 54]  
Press when the player is in either play or stop mode to open and  
close the Setup screen.  
% Display button [36, 37, 45]  
Press during playback to display statistical disc information.  
Press repeatedly to display different information.  
^ 4/¢ button [20, 21]  
Press to call up the top menu programmed on the DVD.  
Depending on the DVD, the top menu may be identical to the  
DVD menu.  
Press to go back or advance to previous chapters/tracks. Press  
and hold to perform fast-reverse/fast-forward playback scanning.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I Display  
1
2
3
4
5
6 7  
8 9  
REPEAT  
REMAIN  
LAST  
DVD  
VCD  
TITLE  
CHAPTER TRACK  
COND.  
D
DTS  
GUI  
0-=  
~
1 £/8 indicator  
2 Inserted disc indicator  
3 TITLE indicator  
9 COND. indicator  
0 ŸD indicator  
- DTS indicator  
4 Angle icon indicator  
5 CHAPTER/TRACK indicator  
6 REPEAT indicator  
7 REMAIN indicator  
8 LAST indicator  
= GUI (Graphical User Interface) indicator  
Indicates an on-screen menu operation is being performed. On-  
screen menu helps you set up the player.  
~ Multifunctional indicator  
(e.g. operating status and error messages)  
I Rear panel  
1
2 3 4  
5
6 7  
8
9
RS-232  
VIDEO  
OUTPUT  
ANALOG  
OUTPUT  
COMPONENT  
DIGITAL  
OUTPUT  
MONO  
Y
REMOTE  
CONTROL  
AC INLET  
DVD PLAYER  
MODEL NO. DPS-5.2  
OPTICAL COAXIAL  
VIDEO  
P
B
L
L
S VIDEO  
P
R
R
R
1 RS-232 port  
6 DIGITAL OUTPUT OPTICAL jack [14]  
This port is to be used in conjunction with an external controller to  
control the operation of the DPS-5.2 using an external device.  
2 VIDEO OUTPUT VIDEO jack [13]  
Use to output the digital audio signal recorded on discs. You can  
output the digital signal via the optical output jack to an AV  
amplifier or receiver.  
7 DIGITAL OUTPUT COAXIAL jack [14]  
Use to output the digital audio signal recorded on discs. You can  
output the digital signal via the coaxial output jack to an AV  
amplifier or receiver.  
Connect to the video input on a TV or monitor or AV amplifier or  
receiver with video input capability.  
3 VIDEO OUTPUT S VIDEO jack [13]  
If your TV or monitor has an S video input, clear picture  
reproduction is possible by connecting the player to your TV or  
monitor via the S Video jack.  
You can switch between [S1] and [S2] S-video output from the  
Setup menu.  
8 z jack [14]  
Use to connect this player to another component bearing the z  
mark. This lets you control this unit as though it were a  
component in a system.  
4 VIDEO OUTPUT COMPONENT jacks [13]  
If your TV or monitor has component video inputs, you can  
produce a higher quality picture on your TV or monitor by  
connecting to the component video outputs on this unit.  
5 ANALOG OUTPUT jacks [13, 14]  
9 AC INLET [15]  
Use to connect the power cord to the wall outlet.  
Use to output two-channel audio (analog) to the audio stereo  
inputs on a TV or stereo amplifier. If you are connecting to a  
receiver that has both digital and analog input jacks for DVD  
player connection, it may be beneficial to make both connections.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index to Parts and Controls  
Remote controller  
- FR/FF 1/¡ buttons [21]  
OPEN  
ON  
/CLOSE  
During playback of DVD and Video CD, press ¡ to perform fast  
forward scanning or 1 to perform fast reverse scanning of DVD  
and Video CD. When a CD or MP3 is loaded, audio scanning is  
performed.  
TV  
ON/STANDBY  
1
2
4
6
7
@
#
%
&
STANDBY ANGLE  
AUDIO SUBTITLE  
3
5
$
^
*
LAST M COND.M DIMMER DISPLAY  
TOP MENU  
MENU  
= Number buttons (1-9, 0, +10)* [19-21, 24-30, 49, 51, 52, 55]  
Use to perform direct title/folder and chapter/track searches, and  
to input numerical values.  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
(
8
0
~ RANDOM button [27]  
Press to play chapters/tracks in random order.  
! REPEAT button [26]  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
9
-
)
_
DOWN  
STEP/SLOW  
Use to set the repeat mode.  
@ 0 button [19, 22]  
Press to open or close the disc tray.  
# SUBTITLE button [33, 48, 49]  
Press repeatedly to select one of the subtitle languages  
programmed on a DVD or to turn the subtitles off.  
$ AUDIO button [33, 47]  
1
4
7
2
5
8
0
3
6
9
+
+
-
FUNCTION  
M
=
~
¡
¢
SEARCH CLEAR  
+
10  
-
RANDOM REPEAT  
A
B
PROGRAM  
£
!
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
Press repeatedly to select one of the audio languages  
programmed on a DVD.  
§
For Video CD, CD and MP3, each press changes the audio  
output as follows.  
Stereo 1L(Left) 2/R(Right)  
% DISPLAY button [36, 37, 45]  
Press during playback to display statistical disc information.  
Press repeatedly to display different information.  
^ DIMMER button [37]  
Toggle to control the lightness of the display.  
& MENU button* [20, 25, 32, 33, 48]  
Use to display or close the DVD menu or MP3 Navigator screen.  
* ENTER button*  
1 ON button [15, 16, 19, 22, 38, 55]  
Press to switch the player on.  
2 STANDBY button [15, 22, 34, 55]  
Press to put the player in standby.  
3 ANGLE button [32]  
[16, 19, 20, 25, 27-31, 38, 44, 45, 49, 51, 52, 54, 55]  
Use to implement settings selected with the cursor buttons or to  
set items highlighted in a menu.  
Some DVDs are recorded with various camera angle playback  
options. Press ANGLE repeatedly to display different camera  
angles.  
( SETUP button* [16, 38, 39, 54]  
Press when the player is in either play or stop mode to open and  
close the Setup screen.  
) PLAY £ [19, 21-24, 26-28, 30, 34]  
Press to start or resume playback.  
_ UP/DOWN 4/¢ [20, 21]  
During playback, press 4 to go back to a previous chapter/track  
and ¢ to advance to the next chapter/track .  
+ STEP/SLOW +/buttons [23]  
4 LAST M button [34]  
You can resume DVD or Video CD playback from the point you  
last watched even if the disc is removed from the player. Press  
LAST M during playback to set a Last Memory point. When you  
want to resume playback of that disc, press LAST M in the stop  
mode and playback starts from the memorized point. Last Memory  
locations can be stored for up to 5 DVDs and 1 Video CD.  
5 COND. M button [35]  
Press STEP/SLOW + or during playback to view still frame.  
Press and hold STEP/SLOW + or during playback to view slow  
playback. In still frame, press STEP/SLOW + to advance DVDs  
and Video CDs frame by frame and STEP/SLOW to back up a  
few frames at a time (DVD only).  
You can store in memory the settings for up to 15 DVDs. Press  
COND. M during DVD playback to memorize the settings.  
6 TOP MENU button* [20, 24]  
Press to call up the top menu programmed on the DVD.  
Depending on the DVD, the top menu may be identical to the DVD  
menu.  
¡ FUNCTION M button [54]  
You can store in memory up to 5 settings. Press FUNCTION M to  
memorize and recall the settings.  
CLEAR button [25-30, 33-35, 49]  
7 Cursor buttons (2/3/5/)* [16, 19, 20, 25, 28-31, 37, 38]  
VOL +/buttons [55]  
Use to move through the options on menu screens and to change  
Works in conjunction with a number of player functions. Use to  
cancel repeat and random playback, and to edit programs.  
£ SEARCH button [24]  
Press to perform a title/folder, chapter/track or elapsed time  
search.  
¢ PROGRAM button [25, 28-31]  
settings.  
CH +/, VOL +/buttons [55]  
8 RETURN button* [20, 38, 49, 52]  
Use to go one menu back (current settings are maintained). Use  
RETURN when you do not want to change the option setting in a  
menu.  
You can program titles, chapters, or tracks to play back in a  
desired order. Programs can be a maximum of 24 steps.  
Additionally, DVD programs for up to 24 discs can be stored in  
the players memory for future use.  
TV/VCR button [55]  
9 PAUSE 8 button [23]  
Press to pause playback of a disc. Press again to resume  
playback.  
A-B button [26]  
0 STOP 7 button [16, 20, 22, 28, 30, 34]  
Press to stop playback. Pressing once enables playback to  
resume from a point shortly before the location where it was  
stopped. Pressing twice causes the disc to return to the beginning  
of the disc when playback starts again.  
Press at the beginning and end of the section you want to repeat  
or to mark a location you want to return to.  
§ DVD/TV switch [55]  
(Buttons indicated with * are used for menu operation.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Connecting to a TV  
Before connecting  
Incomplete  
Refer also to the instruction manual of the TV.  
Connect the plugs securely.  
When you connect the DVD Player to the TV, be sure to turn off the  
power and unplug both units from the mains before making any  
connections.  
Connect the DVD Player to the TV directly. If you connect the DVD  
Player to a VCR, TV/VCR combination, or video selector, the playback  
picture may be distorted as DVD videos are copy protected.  
Insert completely  
Making component video connections  
If the TV or monitor has component video inputs, making this  
type of video connection will produce the ideal picture quality for  
the presentation of DVD-Video. Using a component video cable  
(sold separately), connect the VIDEO OUTPUT COMPONENT  
jacks to the corresponding component video input jacks on the  
TV.  
BE sure to set the TV Aspect after connection using  
the Setup Navigator explained in Setting Up the  
Playerstarting on page 16 or the function setting  
menu explained in Adjusting Audio and Video  
Settingsstarting on page 38.  
Actual labels for component video inputs may vary depending on  
the TV manufacturer. (e.g. Y, R-Y, B-Y or Y, CB, CR)  
In some TVs or monitors, the color levels of the playback picture  
may be reduced slightly or the tint may change. In such a case,  
adjust the TV or monitor for optimum performance.  
Component video cable  
To component video inputs  
TV  
Stereo audio connection cable  
To audio input  
Active subwoofer  
(for powerful bass  
sound)  
L (White)  
R (Red)  
: Signal flow  
RS-232  
VIDEO  
OUTPUT  
ANALOG  
OUTPUT  
COMPONENT  
DIGITAL  
DO NOT connect  
the mains lead at  
this time.  
OUTPUT  
Y
MONO  
REMOTE  
CONTROL  
AC INLET  
DVD PLAYER  
MODEL NO. DPS-5.2  
OPTICAL COAXIAL  
VIDEO  
P
B
R
L
L
S VIDEO  
P
R
R
Stereo audio/video connection cable  
To audio/video inputs  
R (Red)  
Connecting to a TV Using the Audio/Video  
Connection Cable  
L (White)  
If the TV or monitor has an S video input, make the S video  
connection. The S video connection will provide higher  
quality picture playback.  
Video  
(Yellow)  
S video connection cable  
To S video input  
TV  
Notes  
If you make the S video connection, leave the yellow plug  
disconnected.  
If the TV audio is monaural, leave the red plug disconnected.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an Amplifier  
(To Enjoy the Sound Advantage of the DVD Player)  
Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on the opposite page,  
connecting with an amplifier provides you high quality dynamic sounds.  
To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio, and DTS surround sound, you need to connect to an  
amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio, and DTS decoder respectively.  
Notes  
Before connecting  
• The remote controller supplied with Integra/Onkyo amplifier can  
be used to operate the DVD player.  
• The function of the upper and lower z connectors are the same.  
Connect to either one.  
• Connecting z cable only does not make the system operational.  
You must also connect the audio cables as well.  
• Refer to the instruction manual of the amplifier.  
• When you connect the DVD Player to the amplifier, be sure to turn off  
the power and unplug both units from the mains before making any  
connections. Otherwise, the speakers may be damaged.  
• Connect the plugs securely.  
Incomplete  
Insert completely  
BE sure to set the digital output setting after  
connection using the Setup Navigator explained in  
“Setting Up the Player” starting on page 16 or the  
function setting menu explained in “Adjusting  
Audio and Video Settings” starting on page 38.  
I Making a digital connection with the  
amplifier  
If your amplifier has a digital input jack, be sure to connect  
it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack  
on the DVD player.  
Optical fiber connection cable  
To Digital optical jack  
Notes  
DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital  
receiver) which is reserved only for video disc players.  
Coaxial connection cable  
To Digital coaxial jack  
An amplifier with a Dolby  
Digital/DTS/MPEG1/MPEG2  
decoder or 2 channel digital  
stereo  
z cable  
To z jack  
: Signal flow  
RS-232  
VIDEO  
OUTPUT  
ANALOG  
OUTPUT  
COMPONENT  
DIGITAL  
OUTPUT  
DO NOT connect  
the mains lead at  
this time.  
Y
MONO  
REMOTE  
CONTROL  
AC INLET  
DVD PLAYER  
MODEL NO. DPS-5.2  
OPTICAL COAXIAL  
VIDEO  
P
B
R
L
L
S VIDEO  
P
R
R
z cable  
To z jack  
Stereo audio  
connection cable  
To audio input  
An amplifier with no  
digital connection  
L (White)  
R (Red)  
I Making the analog connection with the  
amplifier  
If your amplifier has no digital audio input, you can make  
the analog connection. If the amplifier has a Dolby Pro  
Logic decoder, you can reproduce the Dolby Pro Logic  
surround sound.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Power/  
Turning on the DVD Player  
Before connecting  
The DPS-5.2 is shipped with the main power (Power)  
switch in the on position (_On). When the power cord is  
plugged in for the first time, the DPS-5.2 will automatically  
enter the standby state and the Standby indicator will light  
(same condition after step 2 below).  
Make sure that all the connections on pages 13 and 14 are  
complete (the connection to a TV is required).  
POWER  
STANDBY/ON  
Standby/On  
Plug the supplied power cord into  
the AC INLET and then into the  
power outlet on the wall.  
Press Standby/On on the DVD  
Player or ON on the remote  
controller.  
3
1
Do not use a power cord other than the  
one supplied with the DPS-5.2. The  
power cord supplied is designed for use  
with the DPS-5.2 and should not be  
used with any other device.  
The DVD Player turns on and the Standby  
indicator turns off.  
To put the DVD Player in the standby  
mode, press Standby/On on the DVD  
Player, or STANDBY on the remote  
controller. Be sure to set the volume to  
minimum before putting the DVD Player  
in the standby mode for the next use to  
avoid sudden loud sound reproduction.  
Never have the power cord  
disconnected from the DPS-5.2 while  
the other end is plugged into the wall  
outlet. Doing so may cause an electric  
shock. Always connect by plugging into  
the wall outlet last and disconnect by  
unplugging from the wall outlet first.  
While the Standby indicator lights up,  
the DVD Player can receive signals from  
the remote controller. However, if you  
press Power on the DVD Player to  
switch off the main power, the remote  
controller cannot be used to turn on the  
DVD Player.  
AC INLET  
Setting the STANDBY button to standby  
does not shut off the power completely.  
To the mains  
Power  
Press Power to switch on the main  
power.  
2
The DVD Player enters standby mode.  
The Standby indicator lights up.  
The buttons on the remote controller do  
not operate if the Power switch is set to  
Off.  
To switch off the main power, press  
Power again.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Player  
The Setup Navigator has been designed to simplify the  
process of getting the DVD player ready to perform.  
Designed as a series of on-screen multiple-choice  
questions, the Setup Navigator automatically sets the  
audio, video, and language settings according to how  
the questions are answered. Once this procedure is  
complete, it will be possible to begin using the DVD  
player to enjoy DVDs.  
The procedure on this page describes the operations  
necessary to function within the Setup Navigator  
screens. A detailed description of the contents of each  
question that appears on the screen can be found on  
the following pages.  
Using the Setup Navigator  
I When setting up for the first time  
ON  
Press ON (Standby/On on the front  
1
Some DVDs start playing automatically when loaded in the  
player. Because the Setup Navigator cannot be used if a disc  
is playing, it is recommended to set up the player using the  
Setup Navigator before loading a DVD for the first time. If a  
DVD has been loaded, be sure to press 7 before proceeding.  
panel).  
If theres already a disc loaded and it starts  
to play, press 7 to stop it.  
Press SETUP.  
When SETUP is pressed for the first time,  
SETUP  
2
I To change the answer to a prior question  
Use the cursor button (2) to return to previous screens.  
Please note, however, that you cannot go forward using the  
cursor button (3), so it will be necessary to answer all the  
questions that occur after the screen that was returned to.  
the following screen appears. Though the  
Setup Navigator may be used more than  
once, this screen only appears the first  
time SETUP is pressed.  
Audio  
V2 Language General  
Video1  
I To exit the Setup Navigator  
Setup Navigator  
Press SETUP while on any of the screens to exit the Setup  
Navigator. Please note that if the Setup Navigator is exited  
before all the questions are answered, no settings are  
changed.  
Setup Navigator  
Start  
Auto Start Off  
Setup using the Setup Navigator  
ENTER  
SETUP  
Move  
Select  
Exit  
Note  
On-screen information ( ) appears to clarify the functions and  
i
explain the options available.  
Use the cursor buttons (5/) to  
3
4
make a selection.  
If you are going to use the Setup  
Navigator, it is not necessary to change  
the setting on the first screen. Please  
proceed to the next step.  
If you do not want to set up the player  
using the Setup Navigator, use the  
cursor button () to select [Auto Start  
Off] at this time.  
The Setup Navigator function may still  
be used at a later time in manual Setup  
screen menu operation (page 38).  
Press ENTER.  
The selection is entered and the next  
Setup Navigator screen appears.  
ENTER  
Use steps 3 and 4 as a basis for entering  
selections on the all of the Setup Navigator  
screens described on the following pages.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ON  
TV  
ON/STANDBY  
ON  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST M COND.M DIMMER DISPLAY  
TOP MENU  
MENU  
5/∞  
-
+
CH  
CH  
+
VOL  
ENTER  
SETUP  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
7
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
-
RANDOM REPEAT  
A
B
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
I Setting the OSD Language  
I Setting the TV screen size  
(On-Screen Display Language)  
The [OSD Language] screen establishes the OSD language,  
or on-screen display language, which refers to the language  
that is used by the player in menus and  
on-screen messages. Additionally, the language that is  
established at this setting will also be used for the default  
audio and subtitle language.  
The [TV Type] screen establishes the size, or more  
appropriately the width to height ration of your television or  
monitor. The width-to-height ratio of conventional TVs is 4:3,  
while the width-to-height ratio of wide screen and high-  
definition TVs is 16:9. This width-to-height ratio is called the  
aspect ratio.  
Audio  
V2 Language General  
Video1  
Setup Navigator  
Audio  
V2 Language General  
Video1  
Setup Navigator  
English  
français  
Deutsch  
Italiano  
Español  
TV Connection  
TV Type  
Widescreen(16:9)  
Standard(4:3)  
Language  
OSD Language  
Widescreen TV  
16:9 aspect raito  
Select the On Screen Language  
SETUP  
ENTER  
Move  
Select  
Exit  
ENTER  
SETUP  
Move  
Select  
Exit  
Settings: Widescreen (16:9) (Factory setting)  
Standard (4:3)  
Settings: English (Factory setting)  
français  
Deutsch  
Italiano  
Español  
Note  
There are two screen formats that can be used to display  
wide-screen format DVDs: letter box and pan & scan. When  
[Standard (4:3)] is selected in the Setup Navigator, the letter box  
screen format is automatically selected. To switch the preference to  
the pan & scan format, make changes in the Setup screen Video 1  
menu [TV Screen] setting (page 42).  
Notes  
The languages that can be selected may be different from those  
shown above.  
In addition to setting the [OSD Language], the audio and subtitle  
language are also set at this time. If you wish to change the  
audio or subtitle language to a different language, make changes  
in the Setup screen Language menu [Audio Language] and  
[Subtitle Language] as needed (pages 47, 48).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Player  
Using the Setup Navigator  
I Setting digital audio connections to an AV  
I Confirming the settings  
amplifier or decoder  
The [Exit Setup Navigator] is the final screen in the Setup  
Navigator.  
The [Digital Jack] screen establishes whether digital  
connections have been made to an AV amplifier, receiver, or  
external decoder. As there are numerous options available,  
please refer to the instructions supplied with the component  
the player is connected to determine what digital audio  
formats can be decoded. If you have made no digital  
connections, select [Not Connected].  
Audio  
V2 Language General  
Video1  
Setup Navigator  
Save Changes  
Delete Changes  
Start Again  
Exit Setup Navigator  
Changes are saved  
ENTER  
SETUP  
Select  
Exit  
Move  
Audio  
V2 Language General  
Video1  
Setup Navigator  
Dolby Digital  
Settings: Save Changes (Factory setting)  
Select to have the player make all of the necessary  
audio, video and language settings according to  
your responses in the Setup Navigator.  
Dolby Digital/DTS  
Dolby Digital/MPEG  
Dolby D/DTS/MPEG  
PCM  
Amp Connection  
Digital Jack  
Not Connected  
Compatible with Dolby Digital  
Delete Changes  
Select to exit the Setup Navigator without changing  
ENTER  
SETUP  
Move  
Select  
Exit  
Settings: Dolby Digital (Factory setting)  
Dolby Digital/DTS  
Dolby Digital/MPEG  
Dolby D/DTS/MPEG  
PCM  
any of the system settings.  
Start Again  
Select to return to the [OSD Language] screen of  
the Setup Navigator and do the settings again.  
Not Connected  
I To change other player settings in the Setup  
screen menus  
The procedure for changing the settings in the Setup screen  
menus is described on page 38.  
Warning  
Do not set [Digital Jack] to [Dolby Digital/DTS] or [Dolby D/DTS/  
MPEG] if the amplifier does not have a DTS decoder. If you do  
so, high volume sound may be output and damage your hearing  
as well as speakers.  
Select [PCM] when you connect the player to a 2 channel digital  
stereo amplifier. If you select other than [PCM], high volume  
sound may be output and damage your hearing as well as  
speakers.  
I Setting compatibility with 96 kHz output  
The [96 kHz PCM Audio] screen establishes whether or not  
the AV component the player is connected to is capable of  
processing an audio signal with a sampling rate of 96 kHz.  
This screen only appears if connections have been made to  
an external AV component as determined in previous screens.  
Audio  
V2 Language General  
Video1  
Setup Navigator  
Amp Connection  
No  
96kHz PCM Audio  
Yes  
Don't Know  
Digital jack not compatible with 96kHz  
ENTER  
SETUP  
Exit  
Move  
Select  
Settings: No (Factory setting)  
Select if the connected AV component cannot  
process an audio signal with a sampling rate of 96  
kHz.  
Yes  
Select if the connected AV component can process  
an audio signal with a sampling rate of 96 kHz.  
Dont Know  
Select if you are uncertain whether the connected  
AV component can process an audio signal with a  
sampling rate of 96 kHz.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
Getting Started Using Your  
DVD Player  
ON  
0
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
-
+
CH  
CH  
+
VOL  
ENTER  
ENTER  
2/3/5/∞  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
Warning  
Before you can start to enjoy the digital audio and video  
on DVDs, be sure that you have either performed the  
Setup Navigator procedure described in the previous  
section or made the necessary settings in the Setup  
screen menus as outlined in the next section to set up  
the player to correspond to your home system. Having  
made these settings, you are now ready to start using  
the player to enjoy DVDs, Video CDs, CDs and MP3s.  
£
DOWN  
If the DVD Player is connected to  
the TV or amplifier through the  
analog audio jacks, do not play  
DTS-encoded discs. Excessive  
noise may be output from the  
analog stereo jacks, which may  
damage the connected equipment.  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
Number  
buttons  
SEARCH CLEAR  
+
10  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
To reproduce DTS surround sounds,  
digital connection to an amplifier  
with a DTS decoder is needed.  
DVD TV  
DVD  
VCD  
CD  
MP3  
Playing DVDs, Video CDs, CDs and MP3s  
ON  
Press ON (Standby/On on the front  
panel).  
Select the item you want to view.  
When a DVD is loaded:  
5
1
Select the item with the cursor buttons  
(2/3/5/) or the number buttons then  
press ENTER.  
OPEN  
/CLOSE  
Press 0.  
The disc tray comes out.  
When a Video CD is loaded:  
2
ENTER  
Use the number buttons to select the  
item.  
Load a disc.  
3
1
4
7
2
5
8
3
6
9
Load a disc with the label side facing up,  
using the disc tray guide to align the disc.  
+
10  
0
Notes  
Noise is output if you make digital audio connections to a  
receiver or amplifier that does not have a built-in decoder. Check  
that the digital audio output format selected in the  
Audio menu corresponds to the audio components you have  
made connections to (pages 18, 40, 41).  
The TV screen size is factory set to present the wide screen  
format (16:9 aspect ratio). If you have a standard TV screen (4:3  
aspect ratio), this setting can be changed to match your TV  
screen size in the Video 1 menu (pages 17, 42).  
Do not move the DVD Player during playback. Doing so may  
damage the disc.  
PLAY  
Press £.  
The disc tray closes, and playback  
4
begins.  
MP3 only: It may take a few seconds for  
the player to locate the track on the  
disc, depending on the complexity of  
the file structure. During this time,  
Please wait a momentis displayed.  
Use 0 on the remote controller or Open/Close on the DVD  
Player to open and close the disc tray. Do not touch the disc tray  
while it is moving. Doing so may cause the DVD Player to  
malfunction.  
Depending on the disc, a menu may be  
displayed. If a menu is displayed,  
proceed to step 5.  
Do not press down on the disc tray or put any objects other than  
playable discs on the disc tray. Doing so may cause the DVD  
Player to malfunction.  
In many instances, a menu screen appears when playback of a  
movie is complete. Prolonged display of an on-screen menu may  
damage your television set, permanently etching that image onto  
its screen. To avoid this, be sure to press 7 once the movie is  
complete.  
VCD  
CD  
MP3  
DVD  
I About the  
,
,
and  
marks in  
I When an operation is prohibited  
the pages related to disc operation  
There are times when you are using the player and attempt to  
perform an operation, but for some reason it cannot be  
performed. When this occurs, one of the two following icons  
appears on the screen.  
DVD  
VCD  
CD  
means the function or title is related to DVD-Video operation.  
means the function or title is related to Video CD operation.  
means the function or title is related to audio CD operation.  
means the function or title is related to MP3 operation.  
MP3  
The operation is prohibited by the player.  
The operation is prohibited by the programming on the  
disc.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started Using Your DVD Player  
DVD  
DVD  
VCD  
VCD  
When a Menu Screen is Displayed  
To Open or Return To the DVD or Video  
CD Menu Screen  
Although this differs depending on the disc, pressing MENU,  
TOP MENU, or RETURN during DVD playback or RETURN  
during Video CD playback displays the menu screen. Refer to  
the DVD or Video CD disc jacket and accompanying  
documentation for more information.  
Menu screens are displayed for DVDs that have menu  
screens or Video CDs that include Playback Control (PBC).  
DVDs often contain extra information that can be accessed in  
the DVD menu and sometimes makes navigating DVD menu  
screens as enjoyable as watching the feature presentation.  
Example: When a DVD that has menu screens is loaded  
I To play Video CDs without displaying menu  
1 Highlight Clips  
2 Chapter List  
screens  
3 Commercial Header  
4 Subtitles  
5 Soundtrack  
Video CDs with Playback Control (PBC) display a menu  
screen when play is started. It is possible, however, to play  
back Video CDs without displaying menu screens.  
When a Video CD with PBC is loaded, press 7, and then the  
number button of the track you want to play.  
6 Start Main Feature  
Example: When a Video CD that has Playback Control is  
loaded  
STANDARD VOCAL BEST  
1
2
3
4
5
6
7
8
Don't Tekno for an Answer  
Bad Whack Naff Riff  
dubmyheadbassman  
Gooey Love Jingle  
Praise the Day  
Bertie B.& the Goans  
Hood in the Boyz  
Sleek Machine  
Philip William  
Formerly an Artist  
Pfeuti  
G3, Ba-san  
Abstract Jazz Phunk  
Rock the Love Jive  
John Torn  
Hot Monkey Stick  
I To navigate a menu screen  
Although individual DVD titles may differ, when a menu  
screen is displayed, use the cursor buttons (2/3/5/) and  
ENTER on the remote control. The cursor buttons are used  
to move around the options on the screen and ENTER is  
used for selection.  
Occasionally, the number buttons may also be used to  
make selections. If this is possible, using number buttons  
serves to directly select an option on a menu screen. Only  
number buttons are used to make selections on Video CD  
menu screens.  
When the Video CD has more than one menu, pages can  
be advanced to or returned to with 4 or ¢.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
MENU  
ENTER  
TOP MENU  
2/3/5/∞  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
RETURN  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
£
4/¢  
DOWN  
1/¡  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
DVD  
VCD  
CD  
MP3  
VCD  
CD  
MP3  
Chapter (Track) Skip Forward/Skip  
Back  
Forward and Reverse Scanning  
Fast forward and reverse scanning  
FR  
FF  
Advancing to the next chapter (track)  
Press and hold ¡ or 1 during  
playback to scan forwards or  
backwards.  
While ¡1or 1 1is displayed on-  
screen blinking, release the button to  
resume normal playback.  
UP  
Press ¢.  
Press to skip forward to the next chapter  
(track).  
Skipping back to the previous chapter  
(track)  
DOWN  
Variable speed scanning  
Press 4.  
Press once to skip back to the start of  
1 Press (but dont hold) ¡ or 1  
during playback to start scanning.  
the chapter (track) currently playing.  
¡ 1or 1 1appears on screen.  
Press twice to skip back to the start of  
2 Depending on the type of disc  
playing, you can increase the  
scanning speed by pressing ¡  
or 1.  
the previous chapter (track).  
The scan speed is shown on-screen.  
DVD discs have three scanning speeds;  
1, 2 and 3.  
CD and Video CDs have two scanning  
speeds;  
1 and 2.  
MP3 have only one scanning speed.  
3 Press £ to resume normal  
playback.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
ON  
0
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
Getting Started Using Your DVD Player  
T
O
P
M
E
N
U
M
E
N
U
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
£
7
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
DVD  
VCD  
VCD  
CD  
MP3  
Resuming playback from where you  
stopped  
Stopping Playback and Switching  
Power Off  
Use the resume feature to restart playback from the point that  
the disc was stopped last time.  
This features cannot be used with MP3s and CDs.  
STOP  
Press 7.  
Playback stops.  
1
STOP  
Press 7 once.  
1
The display shows RESUMEand the  
stop position is memorized.  
OPEN  
Press 0.  
The disc tray comes out.  
/CLOSE  
2
The resume position remains  
memorized as long as the disc is in the  
player even if you switch the power  
off.  
Pressing 7 twice causes the disc to  
return to the beginning when £ is  
pressed again. The display shows the  
disc type (DVDs or Video CDs).  
Remove the disc.  
3
PLAY  
Press £.  
2
Playback starts from the resume position.  
STANDBY  
Press STANDBY (Standby/On on  
the front panel ).  
4
Notes  
The disc tray goes back in.  
The actual restart position may be slightly before or after the  
resume position.  
If you want to remove the disc, but still want to resume playback  
from the last stopped position, use the LAST MEMORY feature  
instead (page 34).  
The memorized resume position is erased when you open the  
disc tray, or change the Parental Lock Level setting (page 51) or  
On-screen Display (OSD) setting (page 47).  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
Still Frame/Slow Play  
The video images on DVD and Video CD can be viewed  
as a still frame, played back at slow speeds and even  
advanced frame by frame.  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
8
£
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
STEP/SLOW +/–  
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
-
RANDOM REPEAT  
A
B
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
DVD  
VCD  
VCD  
Viewing a still frame  
Viewing slow playback  
You cant use slow reverse play with Video CDs.  
PAUSE  
Press 8, STEP/SLOW +/.  
When viewing a DVD, if the paused picture  
shakes, select the [Field] setting in the  
Setup screen Video 1 menu [Still Picture]  
setting as described in the section on page  
46.  
STEP/SLOW  
During still frame playback, press  
1
2
and hold STEP/SLOW +/during  
+
playback.  
STEP/SLOW  
-
+
-
Press STEP/SLOW +/repeatedly to  
change the slow-motion speed.  
There are four forward slow-motion play  
speeds:  
STEP/SLOW  
+
I Frame by frame advance playback:Viewing  
-
one frame at a time  
3 1/16  
3 1/8  
You cant use frame review with Video CDs.  
1/2 2  
1/4 2  
1 Press 8, STEP/SLOW +/.  
2 Press STEP/SLOW +/.  
There are two reverse slow-motion play  
speeds:  
STEP/SLOW +: The picture advances one frame each  
Slow 1 Slow 2  
time the button is pressed.  
STEP/SLOW : The picture backs up a DVD a few frames each  
time the button is pressed.  
I To return to normal playback  
When viewing a slow playback, pressing £ restores normal  
playback operation.  
I To return to normal playback  
When viewing a still frame playback, pressing 8 or £ restores  
normal playback operation.  
Notes  
There is no sound when viewing still frames or slow playback, or  
when advancing one frame at a time.  
Still frame, slow play, or frame advance playback may not be  
possible with certain titles. In this case, the  
mark is displayed.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locating a Specific Title/Folder/Chapter/  
Track/Location  
DVD  
VCD  
CD  
MP3  
Searching for a Title, Folder, Chapter,Track, or Location on a Disc  
Notes  
This player offers different ways of accessing the information  
on a DVD, Video CD, CD or MP3. Using SEARCH, you can  
search for titles or chapters on a DVD, tracks on a Video CD,  
CD or folders or tracks on a MP3 and even select the point in  
time to start playback.  
For some discs, selection can be made using the top menu on  
the DVD. In this case, press TOP MENU to display the menu  
screen and then make your selection.  
With some DVDs, the search operation may not be possible and  
may stop shortly after being performed. In this case, the  
is displayed.  
mark  
SEARCH  
Time search is not possible with CDs and MP3s.  
Press SEARCH repeatedly to select  
1
When performing DVD or Video CD time search, playback may  
start from a slightly different time than that specified.  
Time search is not possible during when the disc is stopped.  
Search using time search is not possible during PBC playback of  
Video CDs.  
the type of search.  
The type of search changes which each  
press as follows.  
DVD  
3 Title  
Off 2  
3 Chapter  
Time 2  
I To perform a direct title or chapter/track  
search using the number buttons  
Press the number buttons while the disc is stopped to  
select a title or track number.  
Press the number buttons while the disc is playing to select  
a chapter or track number.  
Video CD  
3 Track  
3 Time  
Off 2  
CD  
To select number 3, press 3.  
To select number 10, press 1 and 0.  
3 Track  
3 Off  
To select number 37, press +10, +10, +10 and 7.  
MP3  
3 Folder  
3 Track  
Off 2  
Press the number button(s) of the  
desired title, chapter or track or of  
the specific time where you would  
like to begin playback.  
2
1
2
5
8
0
3
6
9
4
7
To select number 3, press 3.  
To select number 10, press 1 and 0.  
To select number 87, press 8 and 7.  
+
10  
When performing a time search:  
To select 21 minutes, 43 seconds,  
press 2, 1, 4, and 3.  
To select 1 hour, 14 minutes, press 7, 4,  
0, and 0.  
PLAY  
Press £.  
3
Playback of the selected title, folder,  
chapter or track starts. When a time search  
is performed, playback begins at the  
appointed time.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
MENU  
ENTER  
TOP MENU  
2/3/5/∞  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
£
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
Number  
buttons  
SEARCH CLEAR  
+
10  
CLEAR  
-
RANDOM REPEAT  
A
B
PROGRAM  
SEARCH  
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
MP3  
Using the MP3 Navigator  
Use the MP3 Navigator to make searching for the track(s) you  
want to play easier. You can also use it to add or clear tracks  
from the program list.  
I Navigate using the following controls:  
Cursor buttons (2/3) Select folder and tracks from the  
current screen.  
Cursor buttons (5/) Select the previous/next of folders  
and tracks. To move rapidly up or  
down a long list of folders or tracks,  
press and hold the Cursor buttons  
(5/).  
Load a CD-ROM containing MP3  
1
tracks.  
MENU  
Press MENU to enter the MP3  
Navigator screen.  
The left side of the screen shows a list of  
folders containing MP3 tracks.  
Total number of Track  
2
ENTER  
Play the currently selected folder or  
track. MP3 tracks that are unplayable  
on this system are automatically  
skipped and the display shows  
UNPLAYABLE MP3 FORMAT.  
MP3 Navigator  
Folder  
1.FOLDER_1  
Track  
1.T_001  
MENU  
Exit the MP3 Navigator  
2.T_002  
2.FOLDER_2  
3.FOLDER_3  
4.FOLDER_4  
5.FOLDER_5  
3.T_003  
4.T_004  
5.T_005  
PROGRAM  
Add the currently selected track to  
the program list. (Tracks in the  
program list are marked .)  
Pressing PROGRAM repeatedly will  
add the track to the program list  
repeatedly.  
ENTER  
MENU  
Play  
Exit  
Total number of Folder  
If you display the MP3 Navigator when a  
disc is playing, the currently playing folder  
and track numbers are shown at the top  
left of the screen.  
See Programming MP3son page 29  
for how to use program play.  
CLEAR  
Clear the currently selected track  
from the program list.  
On the right side is a list of MP3 tracks  
from the first title in the list.  
MP3 Navigator  
1~4  
Current :  
1~10  
3
1-1  
Folder  
Track  
1.FOLDER~1  
2.FOLDER~2  
3.FOLDER~3  
4.FOLDER~4  
5.FOLDER~5  
6.FOLDER~6  
1.TRACK1~1  
2.TRACK2~2  
3.TRACK3~3  
4.TRACK4~4  
CREAR  
ENTER  
SETUP  
Clear  
Play  
Exit  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
Repeat Play  
You can repeat an entire title, folder, chapter or track, or  
just a part.  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
£
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
CLEAR  
A-B  
-
RANDOM REPEAT  
A
B
PROGRAM  
REPEAT  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
DVD  
VCD  
CD  
MP3  
VCD  
CD  
Repeating a Title, Folder, Chapter or  
Track  
Repeating a Specific Segment  
-
A B  
Repeat play of a specified section  
REPEAT  
Repeat play of a chapter/track  
Press AB at the beginning and end  
of the section you want to repeat.  
Press REPEAT once during  
playback of the chapter or track you  
want to repeat.  
When AB is pressed a second time,  
the disc returns to the location where A–  
B was pressed first and plays the  
selected section repeatedly.  
Repeat play of a title/folder  
Press REPEAT twice during  
playback of the title you want to  
repeat.  
You can only perform AB repeat within  
the same title, chapter, or track.  
Return to a specified location on a disc  
Repeat play of a disc  
1 Press AB at the desired  
VCD  
CD  
location.  
Press REPEAT twice during  
playback of the disc you want to  
repeat.  
2 When you want to return to the  
specified location, press £.  
MP3  
Press REPEAT three times during  
playback of the disc you want to  
repeat.  
I To cancel AB repeat play  
Press CLEAR. Playback continues, but the repeat function is  
canceled.  
I To clear the specified location  
Press CLEAR to cancel repeat play or to clear the specified  
I To repeat a program  
Press REPEAT once during program playback to repeat the  
program.  
location that was set using AB.  
Notes  
With some DVD discs, there may be times when repeat playback  
I To cancel repeat play  
Press CLEAR. Playback continues, but the repeat function is  
canceled.  
is not possible. In these cases, the  
screen.  
mark will appear on the  
With Video CDs, repeat play is not possible when the menu is  
displayed (PBC playback). To perform repeat play, start playback  
without displaying a menu by pressing the track number to be  
repeated when the disc is stopped, and then press REPEAT.  
You cannot use A-B repeat when listening to an MP3.  
If you switch camera angle during repeat play, repeat play is  
cancelled  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
Random Play  
ENTER  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
Play titles, chapters, or tracks on a disc in random order.  
£
DOWN  
4/¢  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
CLEAR  
-
RANDOM REPEAT  
A
B
PROGRAM  
RANDOM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
VCD  
CD  
MP3  
Playing in Random Order  
I To change titles, chapters, or tracks during  
RANDOM  
Random playback of chapters within  
one title  
random play  
• Press ¢ or RANDOM and the next randomly selected  
title, chapter, or track starts playing.  
• Press 4 and playback of the current title, chapter, or track  
starts again from the beginning.  
Press RANDOM once, then press  
ENTER or £.  
“Random Chapter” appears on the screen,  
and chapters within the title will be played  
back in random order.  
ENTER  
I To stop random play  
Press CLEAR. This returns you to normal playback of  
chapters/tracks in order from the chapter/track currently  
playing.  
Random playback of titles  
Press RANDOM twice, then press  
ENTER or £.  
“Random Title” appears on the screen, and  
titles will be played back in random order.  
PLAY  
Notes  
• With Video CDs, random play is not possible during playback  
when the menu is displayed (PBC playback). To perform random  
play, start playback without displaying a menu by pressing a track  
number button while in the stop mode, and then press RANDOM.  
• Random play of programmed chapters/tracks is not possible.  
• In the case of DVDs, random playback may not be possible with  
some discs.  
Random playback of tracks  
Press RANDOM.  
“Random” appears on the screen, and  
random playback begins.  
• Repeat playback of random playback is not possible. In these  
cases, the  
mark will appear on the screen.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing in a Favorite Order  
The titles and chapters within a title on a DVD and  
similarly MP3, CD and Video CD tracks can be arranged  
to play in the order you want.  
With this player, it is possible to make a program as you  
watch a DVD or Video CD or while listening to an MP3 or  
a CD .  
DVD  
Programming DVDs  
A program with a maximum of 24 steps can be memorized.  
I To program a pause in a program  
Press 8 instead of a number button.  
PROGRAM  
Press PROGRAM.  
8appears on the screen and the pause can be programmed.  
A pause cannot be programmed as the first or last position in a  
program, and two or more pauses cannot be programmed in  
succession.  
1
The Program screen appears.  
Program Chapter  
Program Title  
Program Chapter  
Program Title  
Title  
1
7
Chapter  
1
Title  
2(/20)  
Current:  
Title  
Current:  
(Chapter 1~18)  
I To delete a number:  
Use the cursor buttons (5//2/3) to highlight the incorrect  
Program Memory Off  
ENTER  
Program Memory Off  
ENTER  
PROGRAM  
Play  
PROGRAM Exit  
Move  
Move  
Play  
Exit  
number and then press CLEAR.  
The number is deleted. If the number was before another number,  
the later numbers are reordered automatically.  
Use the cursor buttons (2/3) to  
select either [Program Chapter] or  
[Program Title].  
2
3
I To insert a number:  
Use the cursor buttons (5//2/3) to highlight the number to  
be placed after the new number and then press the number  
button(s) of the number to be inserted.  
Once the program type is selected.  
Use the cursor button () to enter  
the program window.  
The new number is inserted before the previously selected number.  
When [Program Chapter] is selected, you  
must also select what title the chapters to  
be programmed are in. Use the cursor  
button (5) to highlight Titleand then use  
the number buttons to enter the title  
number to be used.  
I To stop program play  
Press 7.  
Notes  
When programming chapters, chapters not programmed may  
appear on the screen. This is not a malfunction.  
Programming may not be possible with certain DVD discs. On  
these types of discs, the  
programming is attempted.  
Only chapters within the same title can be programmed during  
chapter programming.  
mark will appear on the screen when  
In the program window, use the  
number buttons to enter the  
numbers of the titles or chapters in  
the order you want to program them  
in.  
1
4
7
2
5
8
0
3
6
9
4
5
+
10  
To program DVD titles/chapters 9, 7,  
and 18 in order, press 9, 7, +10 and 8.  
Program Chapter  
Program Title  
Program Chapter  
Program Title  
Title  
1
7
Chapter  
1
Title  
2(/20)  
Current:  
Title  
Current:  
(Chapter 1~18)  
09  
07  
18  
18  
09  
07  
Program Memory Off  
ENTER  
Program Memory Off  
Move  
PROGRAM  
Exit  
ENTER  
PROGRAM  
Move  
Play  
Play  
Exit  
ENTER  
Press ENTER or £.  
Playback starts in the set order.  
Press PROGRAM to return to the  
previous display. The program will not  
begin until £ is pressed.  
PLAY  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY  
ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
-
+
CH  
CH  
+
VOL  
ENTER  
2/3/5/∞  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
8
7
£
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
Number  
buttons  
SEARCH CLEAR  
+
10  
CLEAR  
-
RANDOM REPEAT  
A
B
PROGRAM  
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
MP3  
Programming MP3s  
A program with a maximum of 24 steps can be memorized.  
I Navigate using the following controls:  
Cursor button  
CLEAR  
Navigate the program list.  
PROGRAM  
Press PROGRAM to enter the [MP3  
1
Clear the currently selected item in the  
program list.  
Program] screen.  
If you added tracks to the program list from  
the Using the MP3 navigatoron page 41,  
the tracks are displayed here.  
ENTER  
Start playing the program list.  
Exit the [MP3 Program] screen.  
PROGRAM  
Total number of folder and track  
Folder name  
Track name  
MP3 Program  
Folder : 001~25  
– – – – – – – – : – – – – – – – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
ENTER  
PROGRAM  
Exit  
Move  
Play  
From this screen you can enter folder and  
track numbers directly to build up a  
program list.  
Use the number buttons to enter a  
three-digit folder number.  
The number of folders on the disc is  
displayed in the top-left of the screen.  
1
4
7
2
5
8
0
3
6
9
2
3
+
10  
Once youve entered a valid folder number,  
the name of the folder appears.  
MP3 Program  
Track 001~10  
FOLDER~1 : – – – – – – – –  
001:– – –  
– – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
ENTER  
PROGRAM  
Exit  
Move  
Play  
1
4
7
2
5
8
0
3
6
9
Use the number buttons to enter a  
three-digit track number.  
The number of tracks in the current folder  
is displayed in the top-left of the screen.  
+
10  
Once youve entered a valid track number,  
the name of the track appears.  
MP3 Program  
Folder 001~25 – – – – – – – – : – – – – – – – –  
001:008  
– – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
– – –:– – – – – –:– – – – – –:– – – – – –:– – –  
ENTER  
PROGRAM  
Exit  
Move  
Play  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing in a Favorite Order  
DVD  
VCD  
CD  
VCD  
CD  
MP3  
Programming Video CDs, CDs  
Additional programming options  
A program with a maximum of 24 steps can be memorized.  
After you have made a program, it is then possible to confirm,  
add, or clear the contents of the program.  
PROGRAM  
Press PROGRAM.  
The program screen appears. When a  
Video CD or CD is loaded, the cursor  
appears in the program window.  
Program Track  
I To confirm the contents of a program:  
On a CD or Video CD track program, press PROGRAM to  
confirm.  
The program screen displays the current program.  
On a DVD, select the program type (title or chapter) with the  
cursor buttons (2/3).  
1
1(/10)  
0.00  
Track  
Current:  
Total Time  
The current DVD title or chapter program can then be confirmed on  
the appropriate program screen.  
I To add to a program:  
1 Press PROGRAM.  
ENTER  
PROGRAM  
Exit  
Move  
Play  
2 Press a number button to add a new title, chapter, or track  
at the end of the program.  
3 Press PROGRAM to exit the program screen.  
Use the number buttons to enter the  
numbers of the tracks in the order  
you want to program them in.  
To program tracks 9, 7, and 18 in order,  
press 9, 7, +10 and 8.  
1
4
7
2
5
8
0
3
6
9
2
3
I To delete a program:  
1 Press PROGRAM.  
2 Select the program with the cursor buttons (2/3), then  
press CLEAR.  
3 Press PROGRAM to exit the program screen.  
+
10  
To edit the program, refer to the  
procedures on the previous page.  
Notes  
Press ENTER or £.  
Playback starts in the specified track  
ENTER  
The complete program will be deleted even if the disc tray is open  
or power off (standby).  
Pressing CLEAR when the disc is stopped will clear all programs.  
order.  
To stop the program play, press 7.  
PLAY  
Notes  
To program a pause, or to add or delete a number, refer to the  
procedures for Programming DVDson page 28.  
You cannot program when playing a Video CD using menu  
selections (during PBC).  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
-
+
CH  
CH  
+
VOL  
ENTER  
ENTER  
2/3/5/∞  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
£
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
Number  
buttons  
SEARCH CLEAR  
+
10  
CLEAR  
-
RANDOM REPEAT  
A
B
PROGRAM  
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
I To add a title/chapter/track to a program  
I To save a program in memory  
This player can memorize the programs on up to 24 DVDs. By  
turning the [Program Memory] to [On], the player will save your  
Press and hold PROGRAM for about 2 seconds.  
The current title/chapter/track number appears on-screen together  
with the program step number. If there isnt already a program then a  
new one will be created.  
program and recall it the next time you use the same DVD. When the  
program memory exceeds 24, programs will be erased in  
chronological order from the oldest program in memory.  
1 Use the cursor button () to highlight [Program Memory]  
and use the cursor button (3) to select [On].  
Chapter 07 3 Program 03  
Program Chapter  
Program Title  
7
1
Title  
1
Chapter  
Current:  
Title  
(Chapter 1~18)  
Program Memory On  
Off  
Move  
I To confirm the contents of a program:  
Press PROGRAM.  
ENTER  
PROGRAM  
Exit  
Select  
2 Press ENTER.  
Notes  
The program is saved in memory.  
When using this function to program DVDs, the program being  
created corresponds to the Program screen (chapter or title) that  
appears when PROGRAM is pressed. Be sure to check that the  
appropriate program type is selected.  
Note  
When a DVD with a program stored in memory is loaded, program  
playback may start automatically.  
You cannot make a program containing chapters in different titles.  
I To erase a program saved in memory  
The player erases programs in chronological order when the  
maximum number of programs that can be held in memory is  
exceeded. To prevent the player from erasing older programs that  
you may still use regularly, or when you dont want to use a program  
anymore, it is possible to manually erase programs stored in  
memory.  
1 Load a DVD that has a program stored in memory.  
2 Press PROGRAM.  
The program screen appears.  
3 Use the cursor button () to highlight [Program Memory]  
and use the cursor buttons (3/) to select [Off].  
4 Press ENTER.  
The program is cleared from memory.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
ANGLE  
TOP MENU  
Selecting the Camera Angle  
You can select a camera angle when viewing DVDs with  
the multi-angle option.  
MENU  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
Viewing from a Desired Camera Angle (Multi-Angle)  
I To check whether or not a disc is recorded  
ANGLE  
Press ANGLE during playback.  
The camera angle changes each time you  
press the button.  
with angles  
The jacket of discs that are recorded with angles will be marked with  
. When locations on discs that are recorded with angles are  
played back, the  
indicator can be displayed.  
Angle  
: 1/4  
Angle  
: 2/4  
To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup  
screen Video menu (page 46).  
\
|
»
«
Angle  
: 4/4  
Angle  
: 3/4  
Notes  
You can use the Multi-Angle function only with discs featuring  
recordings of images shot from different camera angles.  
During Multi-Angle playback, the  
indicator in the display  
lights.  
For some discs, selection can be made using the DVD menu. In  
this case, press MENU to display the DVD menu screen and then  
make your selection.  
If you change the camera angle during still playback, the DVD  
player resumes normal playback.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
Selecting the Audio/  
Subtitle Language  
STANDBY ANGLE  
AUDIO SUBTITLE  
SUBTITLE  
AUDIO  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
MENU  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
CLEAR  
-
RANDOM REPEAT  
A
B
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
DVD  
Changing the Audio Language  
(Multi-Language Function)  
Selecting a Subtitle Language  
(Multi-Language Subtitles)  
Dolby Digital, PCM, and other audio data can be recorded on  
DVDs in a number of languages or audio tracks, letting you  
choose the desired language or audio.  
You can select a desired subtitle language with DVDs that  
have subtitle data in multiple languages recorded on them.  
SUBTITLE  
Press SUBTITLE repeatedly during  
playback.  
AUDIO  
Press AUDIO repeatedly to select  
the desired language.  
Pressing AUDIO once displays the  
currently selected language. Subsequent  
presses rotates through the audio  
languages available on the DVD.  
Pressing SUBTITLE once displays the  
currently selected subtitle language.  
Subsequent presses rotates through the  
subtitle languages available on the DVD.  
Subtitle :1 English  
Subtitle :2 Spanish  
Dolby Digital  
5.1CH  
Dolby Digital  
5.1CH  
: 2 Spanish  
Audio  
: 1 English  
Audio  
HELLO!  
HOLA!  
Notes  
Notes  
The subtitle language cannot be switched if the subtitle language  
is not recorded, or if only one language is recorded.  
Switching the subtitle language may not be possible with some  
discs. In this case, the  
To clear subtitles during playback, press SUBTITLE and then  
press CLEAR, or press SUBTITLE until [Off] appears.  
For some discs, subtitle language selection can be made using  
the menu on the DVD. In this case, press MENU to display the  
DVD menu screen and then make your selection.  
You cannot switch languages if there is only one language  
recorded on the disc.  
Switching the audio language may not be possible with some  
titles. In this case, the  
For some titles, selection can be made using the DVD menu.  
In these cases, press MENU to display the DVD menu screen  
and then make your selection.  
mark will be displayed.  
mark is displayed.  
When you erase the resume position or replace a disc, the DVD  
player returns to the automatic setting in the setting menu (page 47)  
When you erase the resume position or replace a disc, the DVD  
player returns to the automatic setting in the setting menu (page 48)  
I Changing Audio Type  
For enjoyment of karaoke or similar format Video CDs, CDs and  
MP3s, it is possible to select stereo audio, or either right or left  
channel mono depending on the requirements of the source.  
Press AUDIO repeatedly during playback to switch the audio  
type.  
Audio output changes from [1/L] (Left channel) to  
[2/R] (Right channel) to [Stereo].  
Audio  
: 2/R  
Audio  
: 1/L  
Audio  
: Stereo  
Note  
With karaoke and other discs, set the appropriate audio type for  
singing and accompaniment after referring to information on the disc  
jacket or accompanying material.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
Continuing Playback from a  
STANDBY ANGLE  
AUDIO SUBTITLE  
STANDBY  
LAST M  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
Specified Location (Last Memory)  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
The Last Memory function is convenient when you want  
to continue viewing a disc from the point where you were  
watching before. Unlike the resume function, the Last  
Memory function is effective even if the DVD is removed  
from the player (Last Memory locations saved for Video  
CDs are effective only if the disc remains loaded in the  
player).  
£
7
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
CLEAR  
-
RANDOM REPEAT  
A
B
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
Last Memory may not work reliably with some Video CDs  
that feature PBC.  
DVD TV  
DVD  
DVD  
VCD  
VCD  
Memorizing a Last Memory location to  
return to later  
Resuming playback from where LAST  
MEMORY was pressed  
LAST M  
Press LAST M during play.  
The LASTindicator lights on the player.  
Load a disc that has a Last Memory  
1
1
point memorized.  
Some DVDs will start playback  
automatically when loaded. In this case,  
press 7 to stop playback.  
STANDBY  
Press STANDBY to turn the power  
to standby, or stop playback with 7.  
2
Once memorized, the memorized point will  
be recalled even if the power is turned off,  
or if the disc is ejected. Points on up to 5  
discs can be memorized, and those points  
are recalled the next time any of the discs  
are played back.  
LAST M  
Press LAST M while in the stop  
mode.  
The disc begins playback at the  
memorized point.  
2
Last Memory mode may not function for  
A Last Memory point can be memorized  
for only one Video CD at a time as the  
function is only effective until the Video  
CD is removed from the player.  
some DVDs.  
You can use Last Memory for up to five  
discs (after that the one used least  
recently is deleted to make space for a  
new one).  
Even with a disc you have memorized  
with Last Memory, playback begins at  
the start of the disc if you press £.  
This function is for playback of DVDs or  
Video CDs only. You cannot use it with  
CDs and MP3s.  
I To clear the Last Memory location  
1 Load a disc that has a Last Memory point memorized.  
Some DVDs will start playback automatically when loaded. In this  
case, press 7 to stop playback.  
2 Press LAST M while in the stop mode.  
The disc begins playback at the memorized point.  
3 Once the picture appears, press LAST M again.  
4 While Last Memoryis displayed on the screen, press  
CLEAR.  
The LASTindicator disappears from the display.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
Memorizing Settings for Often  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
COND. M  
Viewed DVDs (Condition Memory)  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
You can store in memory settings for DVDs you often  
watch. Settings remain in memory even if you remove the  
disc from the player, or switch power to the player to  
standby. If you load a disc that has its settings  
memorized, COND.appears in the display. When you  
start playing the disc, the memorized settings are  
automatically recalled.  
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
CLEAR  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
Memorizing Settings for DVDs  
I When a disc that has memorized settings is  
COND.M  
Press COND. M during playback.  
Settings are memorized for the disc  
currently playing.  
loaded  
Condition Memorywill appear on the screen, and the  
previously memorized settings will be selected.  
The following six settings are memorized:  
On Screen Display (page 17, 47)  
Video Adjust (page 17, 42)  
I Erasing the recorded contents  
Load a disc that has memorized settings, and press CLEAR  
while Condition Memoryis being displayed. The discs  
recorded data will be erased.  
Multi-Angle (page 32)  
Multi-language (pages 47)  
Notes  
Multi-Language subtitles (page 33, 48)  
Parental Lock Level (page 51-53)  
Settings are stored in memory for use any time.  
You can use Condition Memory for up to 15 discs (after that the  
one used least recently is deleted to make space for a new one).  
If you make changes to any of the settings memorized in  
Condition Memory, press COND. M during playback to memorize  
new settings.  
Switching of the multi-language mode etc., is automatic on some  
discs.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Disc Information  
Use DISPLAY to get current information about the disc  
currently loaded.You can get information about the titles  
and chapters on a DVD or tracks on a Video CD or CD or  
folders and tracks on a MP3. When viewing DVDs, you  
can also check the digital bitstream transmission rate.  
DVD  
VCD  
CD  
MP3  
Viewing Disc Information during while a disc is playing  
Video CD (with PBC disabled)  
DISPLAY  
Press DISPLAY during while a disc  
is playing. Press DISPLAY  
repeatedly to change the  
current track number/  
total number of tracks  
Video CD's total elapsed time  
information being displayed.  
Play  
All  
3/12  
59.26/  
10.53  
70.19  
The disc information is displayed  
superimposed over the video image on the  
screen.  
Video CD's remaining time  
Video CD's total time  
«
Press and hold DISPLAY to display  
the time remaining on the disc.  
When you release the button, the  
information disappears.  
current track number  
Video CD's total elapsed time  
Play  
Track  
3
10.53  
5.23  
3.56/  
elapsed time of current track  
total time of current tracks  
The display changes for each type of disc as follows each time  
the button is pressed.  
«
current track number  
Video CD's total elapsed time  
Play  
Track  
3
10.53  
5.23  
DVD  
1.27/  
current title/chapter number  
elapsed time of current title  
total time of current tracks  
remaining time of current track  
Play  
Title  
329  
51.06/ 101.04  
49.58  
«
remaining total time of  
current title  
remaining time of current title  
Display off  
«
CD  
current title/chapter number  
elapsed time of current title  
current track number  
elapsed time of current track  
Play  
Chapter  
332  
0.21/  
54.53  
1.51  
Play  
Track  
3
0.03  
3.32  
3.29/  
elapsed time of current chapter  
elapsed total time of  
current chapter  
remaining time of current track  
remaining total time of  
current tracks  
«
«
current title/chapter number  
elapsed time of current title  
current track number  
current total time of tracks  
Play  
Chapter  
332  
1.30/  
54.53  
1.51  
Play  
All  
1/10  
66.20/  
1.13  
66.32  
remaining time of current chapter remaining total time of  
current chapter  
CD's remaining time  
CD's total time  
«
«
current title/chapter number  
elapsed time of current title  
Display off  
Play  
Tr. Rate:  
332  
54.53  
6.3  
transmission rate level meter transmission rate level  
«
Display off  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
DISPLAY  
DIMMER  
TOP MENU  
2/3  
-
+
CH  
CH  
+
VOL  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
I Using DIMMER function  
DOWN  
STEP/SLOW  
Press DIMMER to change the display brightness.  
Each time DIMMER is pressed, the display brightness of the unit  
changes as shown below.  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
Normal Dim Very Dim Normal  
+
10  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
DVD  
VCD  
CD  
MP3  
Viewing Disc Information during while  
a disc is stopped  
MP3  
current track number/  
total number of tracks in folder elapsed time of current track  
DISPLAY  
Press DISPLAY during while a disc  
Play  
Track  
16/20  
TRACK1~1  
0.05  
is stopped to display DVD title and  
chapter information or Video CD  
and CD track information or MP3  
folder and track information. Press  
DISPLAY again to turn the display  
off.  
track name  
«
current folder number/  
total number of folder  
elapsed time of current track  
Play  
2/10  
0.05  
Folder  
FOLDER~1  
Information about the titles and chapters or  
folders and tracks on a disc is displayed.  
When the information exceeds the space  
on the screen, use the cursor buttons (2/  
3) to move to other screens.  
folder name  
«
current folder number/  
current track number elapsed time of current track  
DVD  
Information: DVD  
Play  
Track  
216  
2.25  
0.05  
2.30  
Title  
01  
Chapter  
Title  
06  
Chapter  
1 ~ 10  
1 ~ 13  
1 ~ 5  
1 ~ 30  
1 ~ 21  
1 ~ 46  
1 ~ 12  
1 ~ 8  
remaining time of  
current track  
total time of  
current track  
02  
07  
03  
08  
1 ~ 4  
04  
09  
«
1 ~ 8  
05  
10  
current folder number/  
current track number  
DISPLAY  
Exit  
1/2  
elapsed time of current track  
Titles and number of chapters in each title  
Play  
Tr. Rate:  
216  
128kbps  
0.05  
Video CD and CD  
transmission rate level  
Information: Compact Disc  
Total time  
72 . 04  
Track  
«
Track  
Time  
Time  
06  
07  
08  
09  
10  
01  
02  
03  
04  
05  
5 . 23  
4 . 55  
6 . 13  
5 . 45  
5 . 10  
6 . 51  
3 . 18  
6 . 50  
4 . 16  
3 . 22  
Display off  
Notes  
DISPLAY  
Exit  
1/2  
Depending on the format and type of disc being used, not all  
screens may be displayed.  
Total playing time of disc, tracks and track times  
When playing Video CDs in PBC mode or unfinalized CD-Rs not  
all the above information is displayed.  
MP3  
Information: MP3  
Folder  
01  
02  
Track  
1 ~ 9  
1 ~ 11  
1 ~ 3  
Folder  
01  
02  
Track  
1 ~ 10  
1 ~ 13  
1 ~ 5  
03  
03  
04  
05  
1 ~ 22  
1 ~ 15  
04  
05  
1 ~ 4  
1 ~ 8  
DISPLAY Exit  
1/2  
Folders and number of tracks in each folder  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
The procedure on this page describes how to operate the  
menus on the Setup screen.These menus are used to set  
and adjust a number of system settings.The various  
functions that can be adjusted are covered throughout  
this manual.The procedure on this page provides a basic  
outline for using the Setup screen menus.  
Using the Setup Screen Menus  
ON  
Press ON (Standby/On on the front  
panel).  
Use the cursor buttons (3) to enter  
1
2
6
the setting options.  
Example  
Audio Video1 V2 Language General  
Audio DRC Off  
Dolby Digital Out  
DTS Out  
Dolby Digital  
Dolby Digital 3 PCM  
SETUP  
Press SETUP.  
The Setup screen appears.  
Example  
96kHz PCM Out 96kHz 3 48kHz  
MPEG Out MPEG 3 PCM  
Output Dolby Digital  
SETUP  
ENTER  
Move  
Select  
Exit  
Audio Video1 V2 Language General  
Audio DRC Off  
Dolby Digital Out Dolby Digital  
DTS Out Off  
96kHz PCM Out 96kHz 3 48kHz  
MPEG Out MPEG 3 PCM  
Not all menu options can be changed  
while a disc is playing. In these cases,  
the options appear grayed out on the  
screen and cannot be adjusted. To  
change these settings, press 7 first  
before pressing SETUP.  
Setup audio  
Digital output format/tone adjust  
SETUP  
Exit  
Move  
Use the cursor buttons (2/3) to  
Operating the menu after pressing 7  
may cancel the resume function.  
3
4
select the menu you want.  
As each menu is selected with the cursor,  
the settings appear below the menu  
heading.  
Some menu options are not immediately  
effective if set while a disc is playing. To  
make these settings effective, stop  
playback and then start again, or  
change the settings while the disc is  
stopped.  
Use the cursor buttons () to enter  
the menu.  
The top item within the menu becomes  
highlighted.  
Example  
Use the cursor buttons (5/) to  
select a new setting and press  
ENTER to set the new setting in  
memory.  
Press RETURN or the cursor button (2) to  
exit the options without making any  
changes.  
7
8
Audio Video1 V2 Language General  
Audio DRC Off  
ENTER  
Dolby Digital Out  
DTS Out  
Dolby Digital  
Dolby Digital 3 PCM  
96kHz PCM Out 96kHz 3 48kHz  
MPEG Out MPEG 3 PCM  
Change Dolby Digital output mode  
SETUP  
ENTER  
Move  
Select  
Exit  
RETURN  
Press RETURN or the cursor button  
(2) to go back to the main menu bar  
to select another menu.  
Use the cursor buttons (5/) to  
select the setting you want to  
change.  
5
The options available for each setting  
appear to the right when the setting is  
selected. The current setting appears with  
the setting indicator lit.  
SETUP  
Press SETUP to close the Setup  
screen.  
The Setup screen closes.  
9
Notes  
If you turn off the DVD player during setup, the settings are  
canceled. Press SETUP to finish the setup.  
The memorized resume position may be erased by setup.  
The Setup screen always shows the latest settings.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
-
+
CH  
CH  
+
VOL  
ENTER  
SETUP  
ENTER  
2/3/5/∞  
-
VOL  
RETURN  
TV/VCR  
SETUP  
RETURN  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
SEARCH CLEAR  
+
10  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
Changing to the Setup Screen Expert”  
Menu Mode  
I When setting up for the first time  
The Setup screen menus are divided into two levels, [Basic]  
and [Expert], to make this unit more convenient to operate for  
different levels of users. The [Basic] menu mode contains  
functions that may be considered necessary for the basic  
operations of this player and helpful on-screen information  
It is recommended to set up player using the Setup Navigator  
(page 16). If you selected [Auto Start Off] when the Setup  
Navigator appeared, you may still set up the player using the  
Setup Navigator in the General menu screen.  
If you choose not to use the Setup Navigator, be sure to make  
the necessary settings in the Setup screen  
i
identified by the  
mark. The [Expert] menu mode adds to the  
[Basic] menu mode additional functions of the player that can  
be adjusted to further personalize performance of the player.  
In this manual, functions that are contained in the [Expert]  
Audio, Video 1, Video 2 and Language menus as described on  
the following pages.  
Some DVDs start playing automatically when loaded in the  
player. If a DVD has been loaded, be sure to press 7 before  
proceeding.  
menu mode are identified by the  
Make changes to the [Setup Menu Mode] setting in the Setup  
screen General menu.  
icon.  
Expert  
Note  
Audio  
V2 Language General  
Video1  
Setup Menu Mode Expert  
Setup Navigator  
Basic  
Parental Lock Off (us)  
The next time you press SETUP, youll see the menu screen that you  
exited from last time.  
I How to interpret the setting indicator colors  
Change menu mode  
in the Setup screen menus  
SETUP  
ENTER  
Move  
Select  
Exit  
When setting up the system, or when making adjustments, it is  
convenient to know what settings are applicable to the  
different disc formats. When the settings appear for each  
menu option, the currently selected setting appears with the  
setting indicator highlighted in one of three colors: blue, green  
or yellow. These colors correspond to what formats the menu  
option effects as shown in the table below.  
Settings: Expert  
Basic (Factory setting)  
Note  
On-screen information only appears in the [Basic] menu mode .  
Color of indicator  
Blue  
Disc format(s)  
DVD only  
Yellow  
Green  
DVD/Video CD  
All compatible formats  
Note  
If a setting applicable only to DVDs is changed while a Video CD or  
CD is loaded, a blue DVD icon appears in the upper right hand  
corner of the screen to indicate that the setting is not applicable to  
the currently loaded disc. The setting will be effective the next time a  
DVD is loaded.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
Adjusting the Dynamic Range of the  
Audio Soundtrack  
Audio DRC stands for Audio Dynamic Range Compression.  
When Audio DRC is on, soft sounds such as dialog can be  
heard more clearly without making loud sounds even louder.  
Select from three levels of compression depending on how  
much effect you want. When Audio DRC is set to [Off], there is  
no effect on the audio source.  
Setting the Digital Audio Output  
This player is capable of digital audio output for Dolby Digital,  
DTS, MPEG, and signals with a sampling rate of 96 kHz.  
Make settings in the Setup screen Audio menu to reflect the  
capabilities of the components that you have made digital  
connections to.  
Notes  
Make changes to the [Audio DRC] setting in the Setup screen  
Audio menu.  
If you have already completed the Setup Navigator screen  
operations, the settings on this page have already been set by  
the player.  
Audio Video1 V2 Language General  
If you have made only stereo line connections (analog) using the  
supplied audio cord, it is not necessary to make any changes in  
this menu.  
Audio DRC Off  
Dolby Digital Out  
On  
DTS Out Off  
96kHz PCM Out 96kHz 3 48kHz  
MPEG Out MPEG 3 PCM  
I Dolby Digital Out  
Dynamic playback at low volume  
This player is capable of outputting the Dolby Digital surround  
sound audio signal. When the player is connected to an AV  
component that has a built-in Dolby Digital decoder, select  
[Dolby Digital]. This player can also convert the Dolby Digital  
signal to a digital Linear PCM signal, the same digital signal  
output from a CD. Select [Dolby Digital 3 PCM] when you  
have made connections to an amplifier or receiver with a  
Dolby Pro Logic decoder or a Digital Analog Converter (DAC).  
SETUP  
Move  
Exit  
Settings: Off (Factory setting)  
On  
Notes  
Audio DRC is only effective with Dolby Digital audio sources.  
The level of Audio DRC may differ depending on the DVD.  
If you have set the [Dolby Digital Out] to [PCM] and the [Digital  
Out] setting to [On], the Audio DRC effect is output through the  
digital out jack.  
Audio Video1 V2 Language General  
Audio DRC Off  
The effect of Audio DRC depends on your speakers and AV  
amplifier settings.  
Dolby Digital Out Dolby Digital  
DTS Out  
Dolby Digital 3 PCM  
96kHz PCM Out 96kHz 3 48kHz  
MPEG Out MPEG 3 PCM  
Change Dolby Digital output mode  
SETUP  
Move  
Exit  
Settings: Dolby Digital (Factory setting)  
Dolby Digital 3 PCM  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I DTS Out  
I MPEG Out  
This player is capable of outputting DTS digital audio for DVDs  
recorded in DTS. When this player is connected to an AV  
component that has a built-in DTS decoder, select [DTS]. If  
your system is not equipped to decode DTS, select [Off]. Refer  
to the operating instructions supplied with your audio  
This player is capable of outputting the MPEG digital  
bitstream. When the player is connected to an AV component  
that has a built-in MPEG decoder, select the [MPEG] setting.  
Otherwise, select [MPEG 3 PCM] to convert the digital signal  
to the PCM signal, the digital signal output from a CD.  
components if you are unsure about compatibility with DTS.  
Audio Video1 V2 Language General  
Audio DRC Off  
Dolby Digital Out Dolby Digital  
DTS Out Off  
96kHz PCM Out MPEG  
MPEG Out MPEG 3 PCM  
Audio Video1 V2 Language General  
Audio DRC Off  
Dolby Digital Out Dolby Digital  
DTS Out Off  
96kHz PCM Out  
DTS  
Change MPEG audio output mode  
MPEG Out MPEG 3 PCM  
Change DTS output mode  
Move  
SETUP  
Move  
Exit  
SETUP  
Exit  
Settings: MPEG  
Settings: Off (Factory setting)  
MPEG 3 PCM (Factory setting)  
DTS  
Expert  
I Digital Out  
Note  
Depending on your preferences and the type of connections  
made, you may opt not to have the digital audio signal output  
at all. When this setting is set to [Off] there is no signal output  
from the digital audio output jacks.  
If you have made digital audio connections to component(s) not  
equipped to decode the DTS digital bitstream, be sure to select [Off].  
If a DTS signal is output without decoding, the output is digital noise  
that could potentially cause damage to your speakers.  
Make changes to the [Digital Out] setting in the Setup screen  
Audio menu in the [Expert] menu mode (page 39).  
I 96 kHz PCM Out  
This player is capable of outputting digital signals with a  
sampling frequency of 96 kHz. If you have made connections  
to a component capable of processing this signal rate, select  
[96 kHz] for the signal to be output as is. As some components  
are incapable of processing digital signal input with sampling  
rates of 96 kHz, selecting [96 kHz 3 48 kHz] compresses the  
signal to a standard signal with a sampling rate of 48 kHz.  
Audio Video1 V2 Language General  
Audio DRC Off  
Dolby Digital Out Dolby Digital  
DTS Out Off  
96kHz PCM Out 96kHz 3 48kHz  
MPEG Out MPEG 3 PCM  
Digital Out On  
Off  
SETUP  
Move  
Exit  
Settings: On (Digital bitstream is output) (Factory setting)  
Off (Digital bitstream is not output)  
Audio Video1 V2 Language General  
Audio DRC Off  
Dolby Digital Out Dolby Digital  
DTS Out Off  
96kHz PCM Out 96kHz 3 48kHz  
MPEG Out  
96kHz  
Change 96kHz output mode  
SETUP  
Move  
Exit  
Settings: 96 kHz 3 48 kHz (Factory setting )  
96 kHz  
Note  
On DVDs that contain copy protection, the 96 kHz signal may only  
be output from the analog audio jacks.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
Setting the TV Screen Size  
The width-to-height ratio of conventional TVs is 4:3, while the  
width-to-height ratio of wide screen and high-definition TVs is  
16:9. This width-to-height ratio is called the aspect ratio.  
When viewing software recorded in different aspect ratios, the  
images height to width ratio can be switched to match the TV  
or monitor being used.  
Make changes to the TV screen size in the [TV Screen] setting  
in the Setup screen Video 1 menu. Please note that changes  
to the [TV Screen] setting cannot be made when a disc is  
playing. Stop playback of the disc before attempting to make  
any changes.  
When viewing a wide screen TV or monitor  
DVD screen size format  
Setting and Appearance  
Wide screen format DVD  
Please note that there are some  
wide screen letter box formats  
that place black bars at the top  
and bottom of the screen. This is  
not a malfunction.  
Widesetting  
Standard screen format DVD  
When viewing a standard screen  
format DVD on a wide screen  
TV, black bars may be  
automatically placed at the side  
of the screen to adjust to the  
DVD format.  
Language  
Audio Video1 V2  
General  
TV Screen 4:3(Letter Box)  
4:3(Pan&Scan)  
16:9(Wide  
Widesetting  
)
Standard screen format DVD  
(unnatural stretched effect)  
If you are viewing a standard  
screen format DVD on a wide  
screen TV, the picture may  
appear ‘stretched’ on the  
screen. To remedy this  
Select your display preference  
SETUP  
Move  
Exit  
Settings: 4:3 (Letter Box)  
4:3 (Pan & Scan)  
condition, change your wide  
screen TV to display a standard  
(4:3) screen. Refer to the  
instructions supplied with your  
wide screen TV or monitor for  
more information.  
16:9 (Wide) (Factory setting)  
Notes  
Widesetting  
If [Standard (4:3)] is selected in the Setup Navigator screen, [4:3  
(Letter Box)] is selected on this screen. If you prefer the  
pan&scan format, change the settings on this screen.  
Whether the aspect can be switched or not depends on the disc.  
Please refer to the information written on the disc jacket, etc.  
Some discs may not include the screen format selected in the [TV  
Screen] setting. When this occurs, the standard TV screen format  
available on the disc is automatically selected.  
When viewing a standard size TV or monitor  
DVD screen size format  
Setting and Appearance  
Wide screen format DVD  
The Letter box presentation  
places black bars at the top and  
bottom portions of the screen to  
provide the full wide screen  
presentation of a movie on a  
standard TV (4:3 aspect ratio).  
I Differences in screen sizes and DVD  
formats  
The number of screen size formats currently available can be  
somewhat confusing. If set incorrectly, the video presentation  
may not appear as it should. The following diagrams and  
descriptions are intended to help you set your TV screen size  
in a way that will allow you to fully enjoy the digital video of  
DVD.  
The settings in the [TV Screen] setting are perhaps most  
applicable when the DVD you are watching is programmed in  
the wide screen format. If you have a standard TV, select  
either [4:3 (Letter Box)] or [4:3 (Pan & Scan)] based on your  
personal preference. If you have a wide screen TV, select  
[16:9 (Wide)].  
Letter Boxsetting  
Wide screen format DVD  
The Pan & Scan presentation  
crops both sides of the wide  
screen presentation to use the  
full standard TV screen.  
Pan & Scansetting  
Standard screen format DVD  
If you have a standard TV, the  
standard screen format will be  
presented regardless of the  
setting.  
Any setting  
Wide screen format DVD  
(unnatural squeezed effect)  
If you are viewing a wide screen  
format DVD on a standard TV  
and the [TV Screen] setting is  
set to [16:9 (Wide)], the picture  
may appear ‘squeezed’ on the  
screen. To remedy this  
condition, select either [4:3  
(Letter Box)] or [4:3 (Pan &  
Scan)].  
Widesetting  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Video 1 Options  
I Turning the Screen Saver On and Off Expert  
I Switching the S Video Output Expert  
As a protective function against residual images on the TV  
screen or monitor, a phenomenon referred to as “screen burn”,  
the screen saver appears when the same screen has been  
displayed for a length of time. By default, the screen saver is  
turned on. However, the screen saver function can be turned  
on and off at your discretion.  
You can Switch the kind of S Video signal output from the S  
Video outputs. If you connected your TV with an S Video cord,  
in rare cases the TV picture may appear stretched. In this  
case switch the output from [S2] to [S1].  
Make changes in the [S-Video Out] in the Setup screen Video  
1 menu in the [Expert] menu mode (page 39).  
Make changes to the [Screen Saver] setting in the Setup  
screen Video 1 menu in the [Expert] menu mode (page 39).  
Language  
Audio Video1 V2  
General  
TV Screen — 16:9(Wide  
S-Video Out S1  
Screen Saver S2  
)
Language  
Audio Video1 V2  
General  
TV Screen 16:9(Wide  
S-Video Out S2  
Screen Saver On  
Off  
)
SETUP  
Move  
Exit  
SETUP  
Move  
Exit  
Settings: S1  
S2 (Factory Setting)  
Settings: On (Factory setting)  
Off  
Note  
Pressing 8 (or £) displays a playback screen, and pressing 8 (or  
£) again resumes playback.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
Adjusting the Video Quality  
You can either select a preprogrammed setting designed to  
I Adjusting the picture quality settings  
To create your own setting (1)  
match certain program types or make adjustments to match  
your own preferences and save them in the players memory.  
Make changes to the [Video Adjust] setting in the Setup  
screen Video 2 menu.  
1 Use the cursor button (3) to select [Start] then press  
ENTER.  
Language  
Audio V1 Video2  
General  
Background Gray  
Video Adjust Start  
Video Memory Select  
Video Setup  
2 Use the cursor button () to select [Video Setup] then  
Picture Quality Controls  
press ENTER.  
SETUP  
Move  
Exit  
I Selecting a preprogrammed setting  
1 Use the cursor button (3) to select [Start] then press  
ENTER.  
Video Memory Select  
Video Setup  
3 Use the cursor buttons (2/3) to select the setting to [On] or  
[Off].  
Video Memory Select  
Video Setup  
2 Press ENTER.  
Fine Focus  
Move  
On  
Off  
DISPLAY  
ENTER  
Select  
Check  
4 Use the cursor buttons (5/) to select the setting to adjust.  
You can adjust any or all of the following picture quality factors:  
Fine Focus  
Standard  
Memory 1  
Cinema  
Animation  
Memory 3  
Memory 2  
Switch on to reveal greater detail (higher resolution) in the  
picture.  
Contrast  
Adjusts the contrast of the elements in the picture.  
Sharpness  
Adjusts the sharpness of the mid-frequency (less detailed)  
elements in the picture. (This setting is only effective when [Fine  
Focus] is [On].)  
Chroma Level  
Adjusts how saturated colors appear.  
Hue  
Adjusts the overall color balance between red and green. (This is  
only effective when the player is connected using the VIDEO  
OUTPUT VIDEO or VIDEO OUTPUT S VIDEO jacks.)  
Standard (Factory Setting)  
Presents the video with no effect added.  
Cinema  
Delivers a cinema-like picture.  
Animation  
Provides images with bright clear colors.  
Memory 1, Memory 2, and Memory 3  
These are user programmable settings. See Adjusting the picture  
quality settingson pages 44 and 45 for more information.  
3 Use the cursor buttons (2/3/5/) to select one of the  
preprogrammed picture quality settings.  
If there is a DVD or Video CD playing, the effects of each setting  
can be viewed while it is highlighted on the screen. This may be  
useful in selecting an appropriate setting.  
4 Press ENTER.  
The new selection is set.  
Notes  
Each picture quality setting is defined by a number of individual  
settings, described in Adjusting the picture quality settingson  
pages 44 and 45.  
Depending on the disc and the TV/monitor, you may not see the  
effect clearly.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Use the cursor buttons (2/3) to adjust the settings.  
Adjust these while a disc is playing to see the effect of changes  
immediately.  
6 Repeat steps 4 and 5 to make adjustments to other  
settings.  
I Adjusting the picture quality settings  
To create your own setting (2)  
1 Use the cursor button (3) to select [Start] then press  
ENTER.  
If you would like to save the settings in the players memory, be  
sure to select either [1], [2], or [3] in the [Memory] setting to  
establish which memory location to save the new settings in.  
Please note that if you select a location where settings have  
already been saved, the old settings will be replaced by the new  
ones.  
Video Memory Select  
Video Setup  
2 Use the cursor button () to select [Video Setup] and press  
ENTER.  
3 Press DISPLAY.  
Memory  
Move  
Off  
Select  
1
2
3
Fine Focus  
Contrast  
Sharpness  
Chroma Level  
Hue  
On  
DISPLAY  
ENTER  
Off  
2
Check  
min  
soft  
min  
green  
Off  
max  
fine  
max  
7 When you are finished making adjustments, press ENTER  
to establish the new settings.  
red  
3
Memory  
1
4 Use the cursor buttons (5/) to select the setting and use  
the cursor buttons (2/3) to adjust the settings.  
Adjust these while a disc is playing to see the effect of changes  
immediately.  
5 To memorize the setting, select Memory 1, 2, 3, then press  
ENTER.  
The previous setting will be erased.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
Setting the Video 2 Options  
I Changing the Background of the Screen  
You can select a background to appear when the player is in  
the stop mode.  
Make changes to the [Background] setting in the Setup screen  
Video 2 menu.  
I Setting the Position of the On-screen  
Display Expert  
When watching conventional software on a wide screen TV,  
the operation display is at the very top of the screen, and may  
be difficult to see. Changing the position of the display lets you  
see operation indicators clearly even on a wide screen TV.  
Alternatively, you can choose to turn them off completely with  
the [Off] setting.  
Language  
Audio V1 Video2  
General  
Background Gray  
Video Adjust — Black  
Make changes in the [On Screen Display] in the Setup screen  
Video 2 menu in the [Expert] menu mode (page 39).  
Adjust picture quality  
Language  
Audio V1 Video2  
General  
SETUP  
Move  
Exit  
Background Gray  
Video Adjust  
Still Picture Auto  
Settings: Gray  
Black  
On Screen Display Position-Wide  
Angle Indicator  
Position-Normal  
Off  
I Selecting the Type of Paused Image to  
Expert  
SETUP  
Move  
Exit  
Display  
This function lets you view a clear still-image when DVD  
playback is paused.  
Settings: Position-Wide  
Position-Normal (Factory setting)  
Make changes in the [Still Picture] setting in the Setup screen  
Video 2 menu in the [Expert] menu mode (page 39).  
Off  
Note  
Language  
Audio V1 Video2  
General  
t
This setting is only effective with DVDs that contain a 4:3 aspect  
ratio video presentation.  
Background Gray  
Video Adjust —  
Still Picture Field  
On Screen Display  
Angle Indicator  
Frame  
Auto  
Expert  
I Turning the angle indicator on and off  
When a picture recorded in different angles is played back  
is displayed on the screen. This setting lets you see clearly  
whether the playback picture is recorded in multiple angles or  
not.  
Turn the angle indicator on or off in the [Angle Indicator]  
setting in the Setup screen Video 2 menu in the [Expert] menu  
mode (page 39).  
SETUP  
Move  
Exit  
Settings: Field (Picture shake will be eliminated during a  
paused picture.)  
Frame (Select to obtain higher picture quality.)  
Auto (Selects [Field] or [Frame] automatically  
according to the disc.) (Factory setting)  
Language  
Audio V1 Video2  
General  
Background Gray  
Video Adjust  
Still Picture Auto  
On Screen Display Position-Normal  
Angle Indicator On  
Off  
SETUP  
Move  
Exit  
Settings: On (  
is displayed) (Factory setting)  
Off (Not Displayed)  
Note  
Even when the [Angle Indicator] setting is set to [Off], the  
indicator in the display panel of the player lights during multi-angle  
playback. Therefore, it is possible to know when the multi-angle  
function can be used without having to display the icon on the  
screen.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Language Options  
DVDs have the capacity to contain a great deal of audio  
information, which includes the ability to hold up to 8 different  
language tracks and subtitle information in as many as 32  
different languages. This section outlines the variety of audio  
language and subtitle options available with this player.  
Please note that if you have completed the Setup Navigator,  
the audio and subtitle language options have automatically  
been set in accordance with the [OSD Language] (the  
language that appears on the screen).  
I Selecting an audio language preference  
The audio language that you normally listen to can be  
selected from the various audio languages on a DVD. Even  
when the audio language is changed during playback by  
pressing AUDIO, the language selected at this setting will be  
selected as the default when the DVD is changed.  
Make changes to the [Audio Language] setting in the Setup  
screen Language menu.  
You cannot make this setting with a disc playing.  
Note  
General  
Audio Video1 V2 Language  
DVDs differ in content and do not all contain multiple language or  
subtitle information. Therefore making settings in this section may  
have no effect on some DVDs.  
OSD Language  
Audio Language  
Subtitle Language  
Auto Language  
English  
French  
German  
Italian  
Spanish  
Other  
I Setting the On-screen Display (OSD)  
Setup audio language  
Language  
SETUP  
Move  
Exit  
This setting is used to establish the language that operation  
indicators and on-screen messages and operations display.  
Change this setting in the Setup screen Language menu [OSD  
Language] setting.  
Settings: English (Factory setting)  
French  
German  
Italian  
General  
Audio Video1 V2 Language  
Spanish  
OSD Language English  
Other (For details on how to select other  
languages, see When [Other] is selectedon page  
49.)  
Audio Language  
Subtitle Language  
Auto Language  
français  
Deutsch  
Italiano  
Español  
Select the On Screen Language  
Note  
The menu settings may be different from those shown above.  
SETUP  
Move  
Exit  
Settings: English (Factory setting)  
français  
Deutsch  
Italiano  
Español  
Notes  
The menu settings may be different from those shown above.  
The [OSD Language] setting is factory set to [English]. If you  
want English to be displayed, it is not necessary to adjust this  
setting.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
Setting the Language Options  
I Selecting a subtitle language preference  
I Selecting a DVD menu language preference  
Expert  
The subtitle language that you will normally display can be  
selected from the subtitles programmed on a disc. Even when  
the subtitle language is changed during playback by pressing  
SUBTITLE, the language selected at this setting will be  
selected when the disc is changed.  
Make changes to the [Subtitle Language] setting in the Setup  
screen Language menu.  
You cannot make this setting with a disc playing.  
In addition to containing different audio languages, DVD may  
also contain menu screens in different languages as well.  
Setting a DVD language preference, sets the selected  
language as a default when DVDs with menu information in  
that language are encountered.  
Selecting [w/ Subtitle Language] automatically assigns the  
language selected in the [Subtitle Language] setting.  
Make changes to the [DVD Language] setting in the Setup  
screen Language menu in the [Expert] menu mode (page 39).  
You cannot make this setting with a disc playing.  
General  
Audio Video1 V2 Language  
OSD Language  
Audio Language  
Subtitle Language  
Auto Language  
English  
French  
German  
Italian  
General  
Audio Video1 V2 Language  
Spanish  
Other  
OSD Language  
Audio Language  
Subtitle Language  
Auto Language  
DVD Language  
Subtitle Display  
Subtitle Off  
w/ Subtitle Language  
English  
French  
German  
Italian  
Setup disc's subtitle language  
SETUP  
Move  
Exit  
Spanish  
Other  
Settings: English (Factory setting)  
French  
German  
Italian  
SETUP  
Move  
Exit  
Settings: w/ Subtitle Language (Factory setting)  
Spanish  
English  
Other (For details on how to select other languages,  
see When [Other] is selectedon page 49.)  
French  
German  
Italian  
Spanish  
Note  
The menu settings may be different from those shown above.  
Other (For details on how to select other  
languages, see When [Other] is selectedon page  
49.)  
I Setting Auto Language to control subtitle  
and audio language based on program  
content  
Notes  
The menu settings may look different from the one shown above.  
If this function is not effective, the languages that can be selected  
may also be selected in the DVD menu. Press MENU to open the  
DVD menu and make your selection accordingly.  
When the Auto Language function is used, foreign movies are  
shown with the original audio soundtrack and subtitles in the  
language selected in the [Subtitle Language] menu option.  
Domestic films are shown with the original audio soundtrack  
and no subtitles. (This setting may not be effective with all  
DVD discs.)  
Make changes to the [Auto Language] setting in the Setup  
screen Language menu.  
You cannot make this setting with a disc playing.  
General  
Audio Video1 V2 Language  
OSD Language  
Audio Language  
Subtitle Language  
Auto Language  
English  
English  
English  
On  
Off  
Play dialog, etc. in original language  
Subtitle ON with foreign audio  
SETUP  
Move  
Exit  
Settings: On (Factory setting)  
Off  
Note  
The Auto Language function operates only when this function  
is set to [On], and the language set for the [Audio Language]  
and [Subtitle Language] settings is the same.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I Selecting subtitles, assist subtitles or no  
I When [Other] is selected  
When you want to select one of the 136 languages as the  
main audio language, follow the steps below when the  
following screen appears.  
subtitles Expert  
Use this function to turn the subtitles on or off. Additionally,  
some DVDs provide assist subtitles that provide additional  
explanations of scenes in addition to the standard subtitles for  
viewers who are hard of hearing. Select [Assist Subtitle] to  
display these subtitles on DVDs where this function is offered.  
Make changes to the [Subtitle Display] setting in the Setup  
screen Language menu in the [Expert] menu mode (page 39).  
You cannot make this setting with a disc playing.  
A language code list can be found on page 50.  
General  
Audio Video1 V2 Language  
OSD Language  
Audio Language  
Subtitle Language  
Auto Language  
English  
French  
German  
Italian  
Spanish  
Other  
Setup audio language  
General  
Audio Video1 V2 Language  
SETUP  
ENTER  
Move  
Select  
Exit  
OSD Language  
Audio Language  
Subtitle Language  
Auto Language  
DVD Language  
Subtitle Display  
Subtitle Off  
English  
English  
English  
1 Use the cursor buttons to select [Other] and press ENTER.  
The language selection screen appears.  
On  
On  
Off  
General  
Audio Video1 V2 Language  
Audio Language  
Assist Subtitle  
SETUP  
Move  
Exit  
List of Language  
Code (0~2)  
ja: Japanese  
1
0
0
1
Settings: On (Factory setting)  
Off  
Setup audio language  
Assist Subtitle  
RETURN  
ENTER  
/+  
Move  
Return  
Exit  
SETUP  
Select  
Notes  
If there is no subtitle information recorded on the DVD, no  
subtitles are displayed even if this function is set to [On].  
This setting serves as a default as whether or not to display  
subtitles. Even if this option is set to [Off], subtitles can be  
displayed by pressing SUBTITLE. Similarly, if this option is set to  
[On], the subtitles can be turned off by pressing SUBTITLE and  
then CLEAR.  
2 Use the cursor buttons (2/3) to select either List of  
Languagesor Code.  
3 If you select List of Languages, use the cursor buttons  
(5/) to select the language.  
For languages which are only shown as a code, please refer to  
Language Code Liston page 50.  
List of Languages  
ja: Japanese  
I Forcing subtitles to be displayed Expert  
Even when the subtitles are turned off, some DVDs will  
nevertheless display them on the screen. This setting allows  
you to select the language of the subtitles to be displayed with  
this type of DVD.  
Select [With Audio] to display the subtitles in the same  
language as the currently selected Audio Language. Select  
[Selected Subtitle] to display the subtitles in the language set  
in the [Subtitle Language] setting.  
If you select Code, use the cursor buttons (5/) to input  
the numbers of the input code.  
Use the cursor buttons (2/3) to change the position of the  
cursor. You can also use the number buttons to enter the code.  
Code (0~2)  
Make changes to the [Subtitle Off] setting in the Setup screen  
Language menu in the [Expert] menu mode (page 39).  
You cannot make this setting with a disc playing.  
1
0
0
1
General  
Audio Video1 V2 Language  
4 Press ENTER to set the new language.  
OSD Language  
Audio Language  
Subtitle Language  
Auto Language  
DVD Language  
Subtitle Display  
Subtitle Off  
English  
English  
English  
To exit the screen without making any changes, press RETURN.  
On  
English  
With Audio  
Selected Subtitle  
SETUP  
Move  
Exit  
Settings: With Audio  
Selected Subtitle (Factory setting)  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
Language Code List  
Language codes are used when setting the audio and subtitle  
language preferences (page 47, 48).  
Language  
Input-code  
Language  
Input-code  
Language  
Input-code  
Japanese (ja)  
English (en)  
French (fr)  
1001  
0514  
0618  
0405  
0920  
0519  
2608  
1412  
1620  
1922  
1821  
1115  
0512  
0101  
0102  
0106  
0113  
0118  
0119  
0125  
0126  
0201  
0205  
0207  
0208  
0209  
0214  
0215  
0218  
0301  
0315  
0319  
0325  
0401  
0426  
0515  
0520  
0521  
0601  
0609  
0610  
0615  
0625  
0701  
0704  
0712  
0714  
Gujarati (gu)  
Hausa (ha)  
0721  
0801  
0809  
0818  
0821  
0825  
0901  
0905  
0911  
0914  
0919  
0923  
1009  
1023  
1101  
1111  
1112  
1113  
1114  
1119  
1121  
1125  
1201  
1214  
1215  
1220  
1222  
1307  
1309  
1311  
1312  
1314  
1315  
1318  
1319  
1320  
1325  
1401  
1405  
1415  
1503  
1513  
1518  
1601  
1612  
1619  
1721  
Rhaeto-Romance (rm)  
Kirundi (rn)  
Romanian (ro)  
Kinyarwanda (rw)  
Sanskrit (sa)  
Sindhi (sd)  
1813  
1814  
1815  
1823  
1901  
1904  
1907  
1908  
1909  
1911  
1912  
1913  
1914  
1915  
1917  
1918  
1919  
1920  
1921  
1923  
2001  
2005  
2007  
2008  
2009  
2011  
2012  
2014  
2015  
2018  
2019  
2020  
2023  
2111  
2118  
2126  
2209  
2215  
2315  
2408  
2515  
2621  
Hindi (hi)  
German (de)  
Italian (it)  
Croatian (hr)  
Hungarian (hu)  
Armenian (hy)  
Interlingua (ia)  
Interlingue (ie)  
Inupiak (ik)  
Spanish (es)  
Chinese (zh)  
Dutch (nl)  
Sangho (sg)  
Serbo-Croatian (sh)  
Sinhalese (si)  
Slovak (sk)  
Portuguese (pt)  
Swedish (sv)  
Russian (ru)  
Korean (ko)  
Greek (el)  
Indonesian (in)  
Icelandic (is)  
Hebrew (iw)  
Yiddish (ji)  
Slovenian (sl)  
Samoan (sm)  
Shona (sn)  
Afar (aa)  
Javanese (jw)  
Georgian (ka)  
Kazakh (kk)  
Somali (so)  
Albanian (sq)  
Serbian (sr)  
Siswati (ss)  
Sesotho (st)  
Sundanese (su)  
Swahili (sw)  
Tamil (ta)  
Abkhazian (ab)  
Afrikaans (af)  
Amharic (am)  
Arabic (ar)  
Greenlandic (kl)  
Cambodian (km)  
Kannada (kn)  
Kashmiri (ks)  
Kurdish (ku)  
Kirghiz (ky)  
Assamese (as)  
Aymara (ay)  
Azerbaijani (az)  
Bashkir (ba)  
Byelorussian (be)  
Bulgarian (bg)  
Bihari (bh)  
Telugu (te)  
Latin (la)  
Tajik (tg)  
Lingala (ln)  
Thai (th)  
Laothian (lo)  
Lithuanian (lt)  
Latvian (lv)  
Tigrinya (ti)  
Turkmen (tk)  
Tagalog (tl)  
Bislama (bi)  
Bengali (bn)  
Tibetan (bo)  
Breton (br)  
Malagasy (mg)  
Maori (mi)  
Setswana (tn)  
Tonga (to)  
Catalan (ca)  
Corsican (co)  
Czech (cs)  
Macedonian (mk)  
Malayalam (ml)  
Mongolian (mn)  
Moldavian (mo)  
Marathi (mr)  
Malay (ms)  
Turkish (tr)  
Tsonga (ts)  
Tatar (tt)  
Welsh (cy)  
Twi (tw)  
Danish (da)  
Bhutani (dz)  
Esperanto (eo)  
Estonian (et)  
Basque (eu)  
Persian (fa)  
Finnish (fi)  
Ukrainian (uk)  
Urdu (ur)  
Maltese (mt)  
Burmese (my)  
Nauru (na)  
Uzbek (uz)  
Vietnamese (vi)  
Volapük (vo)  
Wolof (wo)  
Xhosa (xh)  
Nepali (ne)  
Norwegian (no)  
Occitan (oc)  
Oromo (om)  
Oriya (or)  
Fiji (fj)  
Yoruba (yo)  
Zulu (zu)  
Faroese (fo)  
Frisian (fy)  
Irish (ga)  
Panjabi (pa)  
Scots-Gaelic (gd)  
Galician (gl)  
Guarani (gn)  
Polish (pl)  
Pashto, Pushto (ps)  
Quechua (qu)  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Parental Lock Level  
This player lets you set the Parental Lock if the DVD has a  
parental lock level recorded on it. With Parental Lock capable  
discs, you can block access to material you feel is  
inappropriate for your children. Refer to the DVD disc jacket  
and the accompanying documentation to see if a particular  
disc contains a parental lock level.  
Make changes to the [Parental Lock] setting in the Setup  
screen General menu. Please note that changes to the  
Parental Lock level cannot be made when a disc is playing.  
Stop playback of the disc before attempting to make any  
changes.  
I Entering the Password  
When you select either [Level] or [Country Code], it is  
necessary to register the password (4-digit code number).  
Youll be asked to confirm your existing password before  
registering a new one. Use the following steps at any time you  
are asked to enter or confirm your password.  
1 Use the cursor buttons (5/) or the number buttons to  
select a number between 0 and 9.  
You can also use the number buttons to enter the numbers  
directly. When entering your password for the first time, or  
changing it, you will be asked to reenter your password. When  
using the number buttons to confirm the password, the numbers  
appear as asterisks, and the cursor advances automatically to  
the next position.  
You cannot select [Level] or [Country Code] until you have  
registered a password. Select [Password] to register a new  
password. See Entering the passwordon the this page for  
how to register a new password.  
Audio  
V2 Language General  
Video1  
Parental Lock: Register Code Number  
Audio  
V2 Language General  
Video1  
Setup Menu Mode Basic  
Setup Navigator  
Parental Lock Password  
Level  
Enter 4—Digit Code  
Country Code  
RETURN  
Return  
Exit  
+/–  
Move  
Setup viewing restrictions  
ENTER  
SETUP  
Move  
Exit  
2 Use the cursor buttons (2/3) to move the cursor to a  
different position in the password.  
Settings: Password  
When all four numbers of the password have been entered,  
ENTER appears on the screen.  
(For information, refer to Entering the Passwordon  
the this page.)  
Audio  
V2 Language General  
Video1  
Level  
Parental Lock: Register Code Number  
(For information, refer to Setting the Parental Lock  
Levelon the following page.)  
ENTER  
1
0
1
9
Enter 4Digit Code  
Country Code  
(For information, refer to Setting the Country Code’  
on the following page.)  
RETURN  
SETUP  
Return  
Exit  
+/–  
Move  
3 Press ENTER to set the password.  
The password is entered.  
When a DVD with a set Parental Lock level is loaded  
Playback cannot be started until the code number has been correctly  
input by using the cursor buttons (2/3/5/) or the number buttons,  
and ENTER has been pressed.  
Notes  
Be sure not to forget your password. If you should forget it, reset  
the system, and enter a new password. To reset the system, see  
Resetting the Player to System Settings(page 54). Please note  
that this procedure resets the system, and clears all saved  
settings, not just the password.  
Some discs lock out violent scenes. Refer to instruction notes on  
discs.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Audio and Video Settings  
Setting the Parental Lock Level  
I Setting the Parental Lock Level  
I Setting the Country Code  
Change the Parental Lock level to a higher or lower level  
according to the settings printed on the DVD disc jacket or  
accompanying documentation. If you use the Condition  
Memory function to save the settings for a particular disc, the  
Parental Lock level is saved as well. Because it is saved in  
memory, Parental Lock levels can be set for individual discs  
according to their content rather than a set level for all DVDs.  
1 Select [Level] in the [Parental Lock] setting and press  
ENTER.  
Change your Country Code whenever you feel it is necessary.  
However, if you forget your existing password, you cannot  
enter this screen to change it.  
1 Select [Country Code] in the [Parental Lock] setting and  
press ENTER.  
The screen changes to the password input screen. To enter the  
password, refer to Entering the Passwordon the previous page.  
The Country Code selection screen appear.  
General  
Audio Video1 V2 Language  
Country Code  
The screen changes to the password input screen. You cannot  
select [Level] until you have registered a password. To enter the  
password, refer to Entering the Passwordon the previous page.  
List of Codes  
Code (0~2)  
us  
2
1
1
9
Audio  
V2 Language General  
Video1  
Setup Country Code  
Parental Lock: Level Change  
RETURN  
SETUP  
Return  
Exit  
+/–  
Move  
ENTER  
Select  
1
Level  
2
3
4
5
6
7
8
Off  
2 Use the cursor buttons (2/3) to select either List of  
Codesor Code.  
3 If you select List of Codes, use the cursor buttons (5/)  
to select the country.  
Setup Parental Lock  
RETURN  
SETUP  
Select  
Return  
Exit  
ENTER  
Move  
2 Use the cursor buttons (2/3) to adjust the Parental Lock  
Level.  
The lock icons appear unlockedup to the selected level to  
indicate that access is available.  
3 Press ENTER to set the new level.  
For country codes which are only shown as a code, please refer  
to Country Code Liston page 53.  
List of Codes  
us  
The new Parental Lock level is set and the screen returns to the  
General menu screen. To go back to the General menu screen  
without making any changes, press RETURN.  
If you select Code, use the cursor buttons (5/) to input  
the numbers of the input code.  
Use the cursor buttons (2/3) to change the position of the  
I Changing the Password  
Change your password whenever you feel it is necessary.  
However, if you forget your existing password, you cannot  
enter this screen to change it.  
cursor. You can also use the number buttons to enter the code.  
Code (0~2)  
1 Select [Password Change] in the [Parental Lock] setting  
and press ENTER.  
2
1
1
9
The screen changes to the password input screen. To enter the  
password, refer to Entering the Passwordon the previous page.  
2 Use the cursor buttons (2/3/5/) or the number buttons to  
enter the new password.  
4 Press ENTER to set the new Country Code.  
To exit the screen without making any changes, press RETURN.  
3 When the new password has been entered, press ENTER.  
The new password is set and the screen returns to the General  
menu screen. To go back to the General menu screen without  
making any changes, press RETURN.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Country Code List  
Country  
Input-code Country-code  
0118  
ar  
0121  
au  
0120  
at  
ARGENTINA  
AUSTRALIA  
AUSTRIA  
0205  
be  
BELGIUM  
0218  
br  
BRAZIL  
0301  
ca  
CANADA  
0312  
cl  
CHILE  
0314  
cn  
CHINA  
0411  
dk  
0609  
fi  
DENMARK  
FINLAND  
0618  
fr  
FRANCE  
0405  
de  
0811  
hk  
0914  
in  
GERMANY  
HONG KONG  
INDIA  
0904  
id  
0920  
it  
INDONESIA  
ITALY  
1016  
jp  
JAPAN  
1118  
kr  
1325  
my  
1324  
mx  
KOREA, REPUBLIC OF  
MALAYSIA  
MEXICO  
1412  
nl  
1426  
nz  
1415  
no  
NETHERLANDS  
NEW ZEALAND  
NORWAY  
1611  
pk  
PAKISTAN  
1608  
ph  
1620  
pt  
1821  
ru  
1907  
sg  
PHILIPPINES  
PORTUGAL  
RUSSIAN FEDERATION  
SINGAPORE  
SPAIN  
0519  
es  
1905  
se  
SWEDEN  
0308  
ch  
2023  
tw  
SWITZERLAND  
TAIWAN, PROVINCE  
OF CHINA  
2008  
th  
0702  
gb  
2119  
us  
THAILAND  
UNITED KINGDOM  
UNITED STATES OF  
AMERICA  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
STANDBY ANGLE  
AUDIO SUBTITLE  
LAST  
M
COND.M DIMMER DISPLAY  
Adjusting Audio and Video Settings  
T
O
P
M
E
N
U
M
E
N
U
-
+
CH  
CH  
+
VOL  
ENTER  
SETUP  
2/3/5/∞  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
M
FUNCTION M  
SEARCH CLEAR  
+
10  
-
B
RANDOM REPEAT  
A
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
Memorizing settings (Function  
Memory)  
Recalling memorized settings  
FUNCTION M  
Up to 5 settings can be memorized.  
Press FUNCTION M.  
1
Only memorized settings are displayed.  
SETUP  
Press SETUP.  
1
The Setup screen appears.  
Use the cursor buttons (5/) to  
2
3
select the menu to be recalled.  
Use the cursor buttons (2/3) to  
select the menu you want.  
2
Press ENTER.  
ENTER  
Use the cursor buttons (5/) to  
3
select the setting to be memorized.  
As each menu is selected with the cursor,  
the settings appear below the menu  
heading.  
FUNCTION M  
Press FUNCTION M.  
FMwill appear on the screen, and the  
setting will be memorized.  
Resetting the Player to System Settings  
To reset the player, press and hold Stop on the front  
panel when pressing Standby/On to turn the unit from  
standby to on .  
4
All program memory, saved settings from functions such as  
Video Memory, Last Memory and Condition Memory are  
cleared, TV System is reset to AUTO and all Setup screen  
menus are returned to factory settings.  
I To clear the Function Memory  
Press FUNCTION M. again  
Note  
Some settings cannot be memorized.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPEN  
ON  
/CLOSE  
TV  
ON/STANDBY  
ON  
STANDBY ANGLE  
AUDIO SUBTITLE  
STANDBY  
LAST  
M
COND.M DIMMER DISPLAY  
MENU  
TOP MENU  
Pre-programming remote controller  
-
+
CH  
CH  
+
VOL  
ENTER  
VOL +/–  
CH +/–  
ENTER  
-
VOL  
RETURN  
TV/VCR  
SETUP  
PAUSE  
FR  
STOP  
FF  
PLAY  
UP  
DOWN  
STEP/SLOW  
1
4
7
2
5
8
0
3
6
9
+
-
FUNCTION  
Number buttons  
DVD/TV  
M
SEARCH CLEAR  
+
10  
-
RANDOM REPEAT  
A
B
PROGRAM  
-
REMOTE CONTROLLER RC 451DV  
DVD TV  
Learning a pre-programming code  
Controlling a TV  
You can make RC-451DV remote controller to operate a TV  
from other brand than Integra/Onkyo by storing the pre-  
programming code of the brand in the RC-451DV.  
DVD  
TV  
Set the DVD/TV switch to TV.  
1
DVD  
TV  
Set the DVD/TV switch to TV.  
1
2
ON  
Press the ON button to turn on the  
device.  
2
3
Find the 2-digit number for the brand  
name of the component that you want  
to operate in the table on page 56.  
Press the desired operation button.  
CH+  
: Changes the TV channel  
upward.  
Turn on the TV that you want to  
operate.  
CH–  
: Changes the TV channel  
downward.  
3
4
TV VOL+ : Increases the TV volume.  
TV VOL: Decrease the TV volume.  
TV/VCR : Switches the TV/VCR inputs.  
STANDBY  
While holding down the STANDBY  
button on the RC-451DV that you  
want to program, press the ENTER  
button, and then release both  
buttons.  
ENTER  
1
4
7
2
5
8
0
3
6
9
Within 30 seconds, enter the 2-digit  
code number.  
5
6
+
10  
Press some operation buttons for  
the component that you want to  
operate to check if the system  
operates properly.  
If the system operates properly, the code is  
correct. If the component does not operate  
properly, return to step 3.  
Notes  
With some brands components, some buttons may not work  
correctly.  
If more than one code is given in the table, try the code one by  
one until you reach the code for your component (i.e. if the first  
code does not work, then try the next).  
The code can be retained by changing the batteries within 1  
minute. If the code is lost, store the pre-programming code again.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pre-programming remote controller  
Pre-programming Code List  
Brand  
ADMIRAL  
Code  
01-03  
AOC  
04  
BELL & HOWELL  
BROKSONIC  
CRAIG  
01, 02  
04  
05-08  
CROSLEX  
CURTIS MATHIS  
DAEWOO  
DAYTRON  
EMERSON  
FISHER  
09  
04, 08, 10  
04, 11, 12  
13  
04-08, 13, 14  
15  
GE  
03, 04, 16-18  
04, 13, 19  
04, 13, 20, 21  
03, 04, 17, 19  
22  
GOLDSTAR  
HITACHI  
JC PENNEY  
JVC  
KTV  
04, 08, 13  
03, 09, 10, 15  
04, 09, 13  
04, 23  
LXI  
MAGNAVOX  
MITSUBISHI  
NEC  
04  
PANASONIC  
PHILCO  
16-18, 24  
04, 09, 13  
09  
PHILIPS  
PIONEER  
PORTLAND  
PROSCAN  
QUASAR  
RADIO SHACK  
RCA  
10, 18, 25  
04, 26  
03  
17, 18  
03, 04, 08, 23  
03, 04, 17, 26-28  
04, 13, 29  
15  
SAMSUNG  
SANYO  
SCOTT  
04, 08  
SHARP  
02, 13, 14  
01, 02  
SIGNATURE 2000  
SONY  
30  
SYLVANIA  
SYMPHONIC  
TOSHIBA  
VIDTECH  
WARDS  
04, 09  
08  
02, 10  
04, 20  
04, 13, 14  
02, 23  
YAMAHA  
ZENITH  
01, 31  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective  
instruction manuals of the connected components and TV.  
Symptoms  
Causes  
Remedies  
Pages  
The DVD Player doesnt  
The mains lead is disconnected.  
Check the connection of the mains lead.  
15  
switch on.  
The main power is set to OFF.  
There is external noise in the computer  
circuits of the DVD Player.  
Turn on the main power.  
15  
Switch off the main power, then switch it  
on again. If not recovered, disconnect the  
mains lead, then connect it again.  
Contact your nearest Integra/ONKYO  
authorized service center.  
The AC fuse is blown.  
The disc tray comes back  
out automatically, shortly  
after the disc tray is closed. The disc is dirty or warped.  
Region number does not conform with  
The disc is not placed properly on the disc Use the disc tray guide to align the disc.  
19  
tray.  
Refer to Notes on Discs.  
5
4
If the region number on the disc does not  
match the number on the player, the disc  
cannot be used  
this unit.  
The DVD Player does not  
start playback.  
No disc is inserted.  
Insert a disc. (Check that DVD,” “VCD,”  
or CDis lit in the DVD Players display.)  
Check the playable discs.  
Place the disc with the playback side  
down.  
19  
An unplayable disc is inserted.  
The disc is placed upside down.  
5
19  
The disc is not placed within the disc tray  
guide.  
The disc is dirty.  
Place the disc within the proper guide on  
the disc tray.  
Eject the disc and clean it.  
19  
6
The parental lock function is activated.  
Deactivate the parental lock function or  
change the parental lock level.  
51-53  
The playback picture is  
occasionally distorted.  
The disc is dirty.  
It is in fast forward or fast reverse  
playback.  
Eject the disc and clean it.  
Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
6
Brightness is unstable or  
noise is visible on the  
playback picture.  
Copy protection is activated.  
Connect the DVD Player directly to the  
TV. Avoid connecting the DVD Player to  
the TV through a VCR.  
13  
The picture from the DVD  
Player doesnt appear on  
the TV screen.  
The TV is not set to receive the output  
signals from the DVD Player.  
The DVD Player is not properly  
connected.  
Set the TV to the DVD Players input.  
Check the connections to the DVD Player. 13  
Settings are canceled.  
When the power is turned off by power  
failure or by unplugging the power cord,  
settings will be canceled.  
Before unplugging the power cord, press  
STANDBY/ON and check that --OFF--”  
disappears in the display.  
Playback doesnt follow the The DVD Player is in repeat playback  
Resume normal playback.  
26-31  
15  
course of the discs  
programs.  
mode, memory playback mode, or  
random playback mode, etc.  
The buttons on the remote Power supply fluctuations or other  
Switch off the main power, then switch it  
on again. If not recovered, disconnect the  
mains lead, then connect it again.  
controller and DVD Player  
do not operate.  
abnormalities such as static electricity  
may interrupt correct operation.  
mark appears on  
screen.  
The selected function does not operate  
for that disc.  
mark appears on  
screen.  
The operation is prohibited by the player.  
When making changes in  
the Setup screen menus,  
is displayed.  
There is a Video CD, CD or MP3 loaded  
in the player and the setting that was  
changed only applies to DVD  
performance.  
The setting will be effective the next time  
a DVD is loaded.  
39  
Some settings in the Setup The [Setup Menu Mode] is set to [Basic].  
Set the [Setup Menu Mode] to [Expert].  
39  
Menu do not appear.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Pages  
Symptoms  
Causes  
Remedies  
41  
No sound is reproduced.  
The Setup screen Audio menu [96 kHz  
PCM Out] setting is set to [96 kHz].  
Either connect using the analog outputs,  
or set [96kHz PCM Out] in the Audio  
menu to [96kHz 3 48 kHz].  
41  
The Setup screen Audio menu [Digital  
Set [Digital Out] to [On].  
Out] is set to [Off].  
40, 41  
A wrong sound signal conversion method Check the current sound signal  
is selected.  
conversion method, and select the right  
setting.  
23  
The pause mode is engaged.  
The volume level of TV or amplifier is set  
to minimum.  
The DVD or CD is recorded in DTS audio. DTS audio is only output from the digital  
output jacks. Connect the digital output on  
the player to the digital input on a receiver  
or amplifier with a built in DTS decoder to  
Press £ or 8 to exit the pause mode.  
Increase the volume level.  
14  
hear DTS audio.  
42  
43  
The screen is stretched or  
aspect does not change.  
The multi aspect setting is not  
appropriate.  
Change the aspect setting in the [TV  
Screen] setting in the Setup screen Video  
1 menu to the screen type most  
appropriate to the TV or monitor you are  
using.  
If you connected your TV with an S-Video  
cord, in rare cases the TV picture may  
appear stretched. In this case switch the  
output from [S2] to [S1]  
The TV is connected with an S-video  
cord.  
5
5
5
Some MP3 tracks appear  
to be missing from a disc.  
The track name does not end in .mp3or This system will not recognize file that  
.MP3.  
does not end in ".mp3" or ".MP3" as an  
MP3 track. Change the track name.  
This player only recognizes the first 250  
folders and tracks on a disc. If there are  
more folders/tracks than this, you will not  
be able to play them.  
More than 251 folders and tracks are  
recorded on a disc.  
A multi-session disc is inserted.  
This player is not compatible with multi-  
session discs. If the disc is multi-session,  
you will only be able to play tracks  
recorded onto the first session.  
9
The buttons on the DVD  
Player operates but the  
buttons on the remote  
controller do not operate.  
No batteries are inserted in the remote  
controller.  
The batteries are worn out.  
Insert new batteries.  
9
9
Replace with new batteries.  
The remote controller is not pointed at the Point the remote controller at the remote  
remote sensor of the DVD Player.  
The remote controller is too far from the  
DVD Player  
sensor of the DVD Player.  
Operate the remote controller within 5 m  
9
Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static  
electricity. If this happens, press the Power switch on the unit and then press it again after about five seconds.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
DVD Player  
Power supply  
AC 120 V, 60 Hz  
Power consumption  
Weight  
14 W  
3.4 kg, 7.5 lbs.  
External dimensions  
Signal system  
435 × 91 × 312 mm (W/H/D), 17-1/8" × 3-9/16" × 12-5/16"  
Standard NTSC  
Regional restriction code  
Laser  
1
Semiconductor laser, wavelength 650 nm  
Frequency range (digital audio)  
DVD linear sound:  
48 kHz sampling 4 Hz to 22 kHz  
96 kHz sampling 4 Hz to 44 kHz  
4 Hz to 20 kHz  
Audio CD:  
Signal-to-noise ratio (digital audio)  
Audio dynamic range (digital audio)  
Harmonic distortion (digital audio)  
Wow and flutter  
More than 100 dB  
More than 96 dB  
Less than 0.015 %  
Below measurable level (less than 0.001 % (W.PEAK))  
Operating conditions  
Temperature: 5°C to 35°C (41°F to 95°F), Operation status: Horizontal  
Outputs  
Video output  
1.0 V (p-p), 75 , negative sync., pin jack × 1  
S-video output  
(Y) 1.0 V (p-p), 75 , negative sync., Mini DIN 4-pin × 1  
(C) 0.286 V (p-p), 75 Ω  
Component video output  
(Y) 1.0 V (p-p), 75 , negative sync., pin jack × 1  
(PB)/(PR) 0.7 V (p-p), 75 Ω  
Audio output (digital output Optical)  
Audio output (digital output Coaxial)  
Audio output (analog audio)  
Audio output (Mono)  
22.5 dBm × 1  
0.5 V (p-p), 75 , pin jack × 1  
2.0 V (rms), 470 , pin jack (L, R) × 2  
2.0 V (rms), 470 , pin jack × 1  
Specifications and features are subject to change without notice.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integra Division of  
ONKYO U.S.A. CORPORATION  
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.  
Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com  
Integra Division of  
ONKYO CORPORATION  
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN  
Tel: 072-831-8111 Fax: 072-833-5222  
E
W0111-2  
SN 29343136A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Water Pump PD30X X B User Manual
Insignia MP3 Player Accessories NS TAPS5 User Manual
Inter Tel Answering Machine 8622 User Manual
Invacare Mobility Aid Tracer SX5 User Manual
JVC Camcorder LYT2115 003A M User Manual
Kalorik Blender USK BL 6 User Manual
Kenwood DVD Player KRF 9300D User Manual
Kenwood Marine Radio TS 820 User Manual
KitchenAid Microwave Oven KHMS1850SBL0 User Manual
KitchenAid Refrigerator KBFL25ETBL00 User Manual