08-1156 NS-LTDVD26-09CA - combined.fm Page 1 Tuesday, April 1, 2008 1:25 PM
User Guide | Guide de l’utilisateur
26" LCD TV/DVD Combo
Ensemble lecteur DVD/TV ACL de 26 po
NS-LTDVD26-09CA
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 3 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting an antenna, cable TV, or satellite TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a standard video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a component video device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting digital audio output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the basic controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Turning the TV on and off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the video mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Selecting the TV signal source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Memorizing channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Changing the channel settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Manually showing or hiding channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Labeling a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting advanced settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the parental controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting OSD settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Adjusting the PC settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PC input signal chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing your computer's video resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the DVD player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Playing an audio CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using DVD repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using CD repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using a DVD title menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using a DVD menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Searching for a DVD title or chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Searching for a specified time on a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Searching for a specific track on a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Searching for a specified time on a CD track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing the DVD audio language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Turning DVD subtitles on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Selecting the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing the DVD display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turning the screen saver on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using DVD last memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Setting up DVD speaker output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting up DVD Dolby Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the DVD equalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting up DVD 3D sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting DVD video options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Setting a DVD parental password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing DVD preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Maintaining your TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
One-Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Français. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS-LTDVD26-09CA represents
the state of the art in television and DVD player design, and is designed for reliable and trouble-free
performance.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 4 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
f
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep
these safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are
popular purchases. However, TVs are not always supported on the proper stands or
installed according to the manufacturer’s recommendations. We and the consumer
electronics industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV
stand rated for the weight of your TV.
Carefully read and understand all enclosed
instructions for proper use of this product.
Don’t let children climb on or play with entertainment
system furniture and TVs.
Don’t place TVs on furniture that can easily be used
as steps, such as a chest of drawers.
Remember that children can become excited while
watching a program, especially on a “larger-than-life”
TV. Make sure that you place or install the TV where it
cannot be pushed, pulled over, or knocked down.
•
Make sure that you route all cords and cables so that
they cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, remember:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight
of your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory (such as UL, CSA, or
ETL) as suitable for your TV.
•
•
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help
from a professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be
mounted to walls backed with steel studs or cinder blocks.
If you are unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 5 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Follow warnings and instructions
Safety information
Follow all warnings on your TV and in the
operating instructions. Follow all operating and
use instructions.
Water and moisture
Do not use your TV near water. For example, do
not use it near a bath tub, wash bowl, kitchen
sink, laundry tub, in a wet basement, or near a
swimming pool.
Warning
To reduce the risk of electric shock, do not remove the cover or
back. There are no user-serviceable parts inside. Refer
servicing to qualified service personnel.
Cleaning
To reduce the risk of fire or electric shock, do not expose your
TV to rain or moisture.
Unplug your TV before cleaning. Do not use
liquid or aerosol cleaners. Use only a damp cloth
to clean the exterior of your TV.
Caution
To prevent electric shock, match the wide blade on the power
cord plug to the wide slot on an electric outlet. If the plug does
not fit, consult a licensed electrician to replace the obsolete
outlet. Do not modify the power cord plug, or you will defeat
this safety feature.
Ventilation
Slots and openings in the cabinet and the back
or bottom are provided for ventilation, reliable
operation, and protection from overheating.
These openings must not be blocked or covered.
Do not block the openings by placing your TV on
a bed, sofa, rug, or other similar surface. Do not
place your TV near or over a radiator or heat
register. Do not place your TV in a built-in
installation, such as a bookcase or rack, unless
you provide correct ventilation or follow the
manufacturer’s instructions.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within your TV. This label is located on the back
of your TV.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying your TV.
Heat
Make sure that your TV is located away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
Laser safety
Your TV employs a laser. Only a qualified service
person should remove the cover or attempt to
service your TV because of possible eye injury.
Grounding or polarization
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a
grounding prong. The wide blade or grounding
prong are provided for your safety. If the plug
does not fit, contact an electrician to replace the
obsolete outlet.
Warnings
•
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
•
Visible and invisible laser radiation is present when open
and interlock defeated.
•
•
•
Do not stare into beam.
The laser is located inside, near the deck mechanism.
The apparatus shall be connected to a mains socket outlet
with a protective earthing connection.
Power cord protection
•
To prevent injury, this apparatus must be securely attached
to the floor/wall in accordance with the installation
instructions.
Always place the TV on the floor or a sturdy, level, stable
surface that will support the weight of the unit.
Installing the TV requires special skill that should only be
performed by qualified service personnel.
Customers should not attempt to do the work themselves.
Insignia bears no responsibility for improper mounting or
mounting that results in accident or injury.
Route power cords so that they are not likely to
be walked on or pinched by items placed on or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from your TV.
•
•
•
Attachments
Use only attachments recommended by
Insignia.
Stand
Caution
The AC power plug is used as the disconnect device, so the
AC power plug shall always remain readily operable.
Do not place your TV on an
unstable cart, stand, tripod,
bracket, or table. Your TV may fall,
Read instructions
causing serious personal injury
and serious damage to your TV.
Read all of the safety and operating instructions
before you use your TV.
Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold
with your TV. If you mount your TV to the wall,
follow the manufacturer’s instructions and use a
mounting accessory recommended by the
manufacturer. Your TV and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause your TV and cart combination to overturn.
Retain instructions
Retain safety and operating instructions for
future reference.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 6 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Lightning
Power source
For added protection for your TV’s receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect
the antenna or cable system. This helps prevent
damage to your TV from lightning and power line
surges.
Operate your TV only from the type of power
source indicated on the marking label. If you are
not sure of the type of power supplied to your
home, consult your TV dealer or local power
company.
Screen protection
Your TV’s screen is made of glass. Do not drop
your TV or hit the glass screen. If the screen
breaks, be careful of broken glass.
Servicing
Do not attempt to service your TV yourself
because opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp
video quality. Occasionally, a few nonactive
pixels may appear on the screen as a fixed blue,
green, or red point. These non-active pixels do
not adversely affect the performance of your TV,
and are not considered defects.
Replacement parts
When replacement parts are required, make
sure that the service technician uses
replacement parts specified by the manufacturer
that have the same characteristics as the
original part. Unauthorized substitutions may
result in fire, electric shock, personal injury, or
other hazards.
Outdoor antenna grounding
If an outside antenna or cable system is
connected to your TV, make sure that the
antenna or cable system is grounded to provide
some protection against voltage surges and
built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to correct
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of the antenna-discharge unit,
Overloading
Do not overload power outlets and extension
cords because this can result in a risk of fire or
electric shock.
Object and liquid entry
Never push objects of any kind into your TV
through openings because objects may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on your TV.
connection to grounding electrodes, and
requirements for the grounding electrode.
Damage requiring service
7
6
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under
the following conditions:
5
4
•
When the power supply cord or plug is
damaged or frayed.
•
If liquid has been spilled or objects have
fallen into your TV.
If your TV has been exposed to rain or water.
If your TV does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions because incorrect
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore your TV to
its normal operation.
3
1
2
•
•
1
2
3
4
5
6
7
Electric service equipment
Power service grounding electrode system
Ground clamps
Grounding conductors
Antenna discharge unit
Grounding clamp
•
•
If your TV has been dropped or damaged in
any way.
When your TV exhibits a distinct change in
performance.
Antenna lead-in wire
Safety check
After completing any service or repair to this TV,
Note to CATV system installer
ask the service technician to perform routine
safety checks to determine that your TV is in
correct operating condition.
This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of
the NEC that provides guidelines for correct
grounding and in particular, specifies that the
cable ground must be connected to the
grounding system of the building as close to the
point of cable entry as practical.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 7 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
End of life directives
#
Item
Description
Your new TV contains materials which can be
recycled and reused. At the end of your TV’s life,
specialized companies can dismantle the
discarded TV to concentrate the reusable
materials and to minimize the amount of
materials to be disposed of. Dispose of your old
TV according to local regulations.
9
IR sensor
Receives signals from the remote control.
Do not block.
10
11
MENU button Press to open the TV menu.
INPUT button Press to select the AV signal input. You can
select TV, AV1, AV2, S-Video, YPBPR,
DVD, HDMI, or PC.
12
Volume+/-
Press to adjust the volume.
Features
Accessories
buttons
13
14
CH+/- buttons Press to change the channel.
POWER button Press to turn your TV combo on or off or
Make sure that the following accessories are
provided in the packaging:
press to leave standby mode.
Back
•
•
•
Power cord
Remote control and batteries
User manual
Front
RF INPUT
MENU
INPUT
VOL
VOL
CH
RF INPUT
CH
POWER
#
Description
1
2
3
4
5
6
PHONES (headphone jack)
INPUT2 (VIDEO and L/R AUDIO INPUT)
HDMI INPUT
#
Item
Description
VGA PC INPUT
1
Disc slot
Insert a DVD or CD to change to DVD
mode and play the disc.
AUDIO PC INPUT
2
PREV button
Press to skip to the previous chapter or
track.
INPUT (Y, Cb/Pb, Cr/Pr, AUDIO L, and
AUDIO R)
3
4
5
NEXT button
STOP button
Press to skip to the next chapter or track.
Press to stop disc playback.
7
8
9
COAXIAL (digital audio) output
AUDIO OUTPUT
PLAY/PAUSE
button
Press to change to DVD mode and begin
and pause the DVD or CD playback.
INPUT1 (S-VIDEO, VIDEO, and L/R AUDIO
INPUT)
6
7
8
Disc In
When Iit, indicates a DVD or CD is loaded
into the disc slot.
10
11
UPGRADE jack (For service only)
RF INPUT
indicator
OPEN/CLOSE Press to eject the disc in the disc slot.
button
Power/Standby Lights when your TV is plugged into a
indicator
power outlet. When your TV is on, the
indicator is blue. When your TV is in
standby mode, the indicator is red.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 8 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Remote
#
Button
Description
13
Press to skip to the previous chapter or
track.
Press to skip to the next chapter or track.
(Skip
reverse)
(Skip
forward)
14
Press to stop DVD or CD playback.
STOP
15
16
17
18
19
DVD TITLE
DVD MENU
REPEAT
AUDIO
Press to open the DVD title menu.
Press to open the DVD menu.
Press to repeat a section of a DVD or CD.
Press to change the DVD audio language.
Press to eject the disc from the disc slot.
(Open)
INPUT
20
21
22
23
24
Press to open the source input menu.
Press to change the zoom mode.
Press to change the channel.
ZOOM
CH
/
RECALL
Press to return to the previous channel.
DISPLAY
Press to display information about the
input source.
25
26
27
PICTURE
AUDIO
Press to change the picture mode.
Press to change the sound mode.
Press to play a DVD or CD. Press again to
pause a DVD or CD.
(Play/Pause)
(slow)
28
Press to slow forward or slow reverse a
DVD.
29
30
31
SETUP
A-B
Press to open the DVD setup menu.
Press to create a playback loop.
T.SEARCH
Press to locate a point at which to start
playback.
32
33
RETURN
Press to return to the previous menu.
SUBTITLE
Press to change the DVD subtitle language.
Not available on some DVDs.
E
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
#
Button
(power)
Description
1
Press to turn your TV combo on or off or
press to leave standby mode.
2
3
4
TV
Press to change to TV mode.
Press to change to DVD mode.
DVD
Number
buttons
Press to enter channel numbers, DVD
chapters, or CD track numbers.
5
MUTE
Press to mute the sound. Press again to
restore the sound.
6
7
VOL +/-
Press to adjust the volume.
MTS/SAP
Press to select Stereo, Mono, or SAP
mode.
8
CCD
Press to select the closed caption mode
while in TV mode.
9
TV MENU
Press to open the on-screen TV menu.
Press to navigate the on-screen menus.
10
,
,
,
11
12
ENTER
Press to confirm your selections.
Press to search backward on a DVD or CD.
(Fast
reverse)
Press to search forward on a DVD or CD.
(Fast
forward)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 9 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
Using the remote control
To use the remote control:
•
Point the remote control directly at your TV,
within a 60° angle horizontally (30° to either
side), and within 30° vertically of the remote
control sensor on the front of your TV and
within 26.25 feet (8 m) of your TV.
3 Replace the cover.
Notes
•
•
•
•
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is depleted.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
30
30
•
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Caution
Do not expose the remote control to liquids, direct
sunlight, or shock. Do not mix batteries of different
types.
Notes
•
Objects between the remote control and the
remote control sensor may block the remote
control signal.
•
The range of the remote control may be
diminished if direct sunlight or other strong light
is shining on the remote control sensor. In this
case, change the angle of the lighting, move
your TV, or operate the remote control closer to
the remote control sensor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 10 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Connecting a standard video device
Setting up your TV
Connecting an antenna, cable TV, or
satellite TV
Note
Your TV supports multiple video source inputs. For
temporary or easy-access video connections, use
the side jacks (AV2). For more permanent
connections, use the rear jacks (AV1).
RF INPUT
RF INPUT
RF INPUT
To connect an external antenna, cable TV, or
satellite TV:
1 Remove the port cover from the back of your
TV (1).
2 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the RF
INPUT jack on your TV.
3 Replace the port cover on the back of your
TV.
4 Turn on your TV.
5 Press INPUT, then press
To connect a standard video device to the
AV1 INPUT jacks:
/
to select TV.
1 Remove the port cover (1) from the back of
your TV.
2 Plug an RCA video cable (4) into a standard
video source (5) and into the VIDEO jack on
the back of your TV.
3 Plug the RCA audio cables (2) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks on the back of
your TV.
4 Turn on your TV.
5 Press INPUT, then press
/
to select AV1.
To connect a standard video device to the
AV2 INPUT jacks:
1 Remove the port cover (1) from the back of
your TV.
2 Plug an RCA video cable (8) into a standard
video source (5) and into the VIDEO jack on
the side of your TV.
3 Plug the RCA audio cables (7) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks (6) on the side
of your TV.
4 Turn on your TV.
5 Press INPUT, then press
/
to select AV2.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 11 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
To connect a standard S-Video device to AV1
INPUT jacks:
Connecting digital audio output
You can connect your TV audio output to a
digital amplifier.
1 Remove the port cover (1) from the back of
your TV.
2 Plug an S-Video cable (3) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO jack (1) on the back of your TV.
3 Plug RCA audio cables (2) into the S-Video
device audio output jacks and into the AUDIO
L and AUDIO R jacks on the back of your TV.
RF INPUT
4 Turn on your TV.
5 Press INPUT and
/
to select S-Video.
Connecting a component video device
RF INPUT
To connect to a digital audio amplifier:
1 Remove the port cover from the back of your
TV.
2 Plug a coaxial cable (2) into the amplifier (3)
and into the COAXIAL jack (1) on the back of
your TV.
To connect a progressive-scan or HDTV
video source to Y/Pb/Pr jacks:
1 Remove the port cover (1) from the back of
your TV.
2 Plug a component video cable (4) into the
progressive-scan or HDTV video device (3)
and into the Y/Pb/Pr jacks (1) on the back of
your TV.
3 Plug the RCA audio cables (2) into the audio
out jacks on progressive-scan or HDTV video
device and into the lower AUDIO L and
AUDIO R jacks on the back of your TV.
4 Turn on your TV.
5 Press INPUT, then press
YPBPR.
/
to select
11
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 12 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Connecting a computer
Using the basic controls
Turning the TV on and off
To turn your TV on and off:
1 Press POWER on the side of your TV or on
the remote control. The POWER/STANDBY
indicator turns blue.
RF INPUT
2 To turn off your TV, press POWER again. The
POWER/STANDBY indicator turns red.
Adjusting the volume
You can adjust the volume using the controls on
your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound, then press
again to restore the sound.
Changing the video mode
Your TV supports multiple video modes.
To select the video mode:
•
Press INPUT one or more times to select the
video mode, then press ENTER. You can
select:
•
•
•
•
•
•
•
•
TV
AV1
AV2
S-Video
YPBPR
DVD
HDMI
PC (VGA)
To connect a computer using VGA:
1 Remove the port cover (1) from the back of
your TV.
2 Plug a VGA cable (4) into the VGA port on
the computer (6) and into the VGA INPUT
port on the back of your TV.
Using your TV
Selecting the TV signal source
3 Plug an audio cable (5) into the audio jack on
the computer (6) and into the AUDIO VGA
INPUT port on the back of your TV.
4 Turn on your TV.
To select the TV signal source:
1 Press TV MENU, then press
/
to
5 Press INPUT, then press
/
to select PC.
highlight the CHANNEL icon. The CHANNEL
To connect to a computer or other HDMI
device using the HDMI jack:
menu opens.
1 Remove the port cover from the back of your
TV (1).
2 Plug an HDMI cable (2) into the HDMI port on
the HDMI device (3) and into the HDMI
INPUT port on the back of your TV.
C H A N N E L
T V S o u r c e
C AT V
A u t o S c a n
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
3 Turn on your TV.
- - - - - -
H i d e
4 Press INPUT, then press
HDMI.
/
to select
Note
MENU
E x i t
S e l
A d j
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press POWER on your TV
or remote control.
2 Press
/
or ENTER to enter the
CHANNEL menu.
3 Press
/
to select TV Source, then press
/
to select Air or CATV.
•
•
Air-VHF/UHF channels.
CATV-Cable TV channels.
4 Press TV MENU one or more times to close
the menu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 13 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Changing channels
Changing the channel settings
To change channels:
To change the channel settings:
•
Press the CH+ or CH- on the side of your TV
1 Press TV MENU on the remote control, then
press
/
to highlight the CHANNEL icon.
or the CH
or CH
on the remote
The CHANNEL menu opens.
control.
To enter a channel number directly:
•
Press the number buttons on the remote
control.
C H A N N E L
T V S o u r c e
C AT V
To go to the previous channel:
Press RECALL.
A u t o S c a n
•
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
Using the on-screen menus
Use your remote control to navigate in the
on-screen menus.
MENU
E x i t
S e l
A d j
To use the on-screen menus:
1 Press INPUT on the remote control to select
2 Press
/
or ENTER to enter the
the video source.
CHANNEL menu.
2 Press TV MENU on the remote control. The
3 Press
/
to select one of the following
on-screen menu appears.
options, then press
/
to change the
3 Press
/
to highlight the PICTURE,
setting. You can select:
AUDIO, ADVANCED, OSD, or CHANNEL
•
•
TV Source—Air or CATV.
Auto Scan—For more information, see
“Memorizing channels” on page 13.
icon, then press
menu.
/
or ENTER to enter the
4 Press
/
to highlight a setting, then press
•
•
•
Channel No.—Press
/
to select the
/
to change the setting.
previous or next channel.
5 Press TV MENU to close the menu.
Channel Label—For more information,
see “Labeling a channel” on page 14.
Show/Hide—For more information, see
“Manually showing or hiding channels” on
page 13.
Memorizing channels
To select channels with the CH buttons, your TV
first needs to memorize the channels. When
your TV memorizes channels, it scans for
channels with signals, then stores the channel
information into memory.
4 Press TV MENU one or more times to close
the menu.
Manually showing or hiding channels
To automatically memorize channels:
1 Press TV MENU on the remote control, then
To manually show or hide a channel:
press
/
to highlight the CHANNEL icon.
1 Tune your TV to a channel you want to add or
The CHANNEL menu opens.
erase using the number buttons.
2 Press TV MENU on the remote control, then
press
/
to highlight the CHANNEL icon.
The CHANNEL menu opens.
C H A N N E L
T V S o u r c e
A u t o S c a n
C AT V
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
C H A N N E L
T V S o u r c e
A u t o S c a n
C AT V
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
MENU
E x i t
S e l
A d j
2 Press
/
or ENTER to enter the
CHANNEL menu.
MENU
E x i t
S e l
A d j
3 Press
/
to select Auto Scan, then press
/
or ENTER to start the auto scan. Your
TV combo scans for and memorizes all
channels available in your area.
3 Press
/
or ENTER to enter the
CHANNEL menu.
4 To stop the auto search, press TV MENU.
When auto search is finished, the channel
changes to the first channel in the memorized
channel list.
4 Press
/
to select Show/Hide, then press
/
to highlight Show or Hide.
5 Press TV MENU one or more times to close
the menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 14 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
3 Press
/
to select one of the following
Labeling a channel
settings, then press
/
to change the
To label a channel:
setting. You can select:
1 Tune your TV to a channel you want using the
•
Picture Mode—Standard, Dynamic,
number buttons.
Soft, or Personal.
Contrast
Brightness
Tint
2 Press TV MENU on the remote control, then
•
•
•
•
•
•
press
/
to highlight the CHANNEL icon.
The CHANNEL menu opens.
Color
Sharpness
Color Mode—Cool, Normal, or Warm. In
PC mode, when Color Mode is
C H A N N E L
T V S o u r c e
A u t o S c a n
C AT V
highlighted, press
/
or ENTER to
open the Color Mode sub-menu.
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
•
Color Mode–Warm, Cool, User, or
Normal (PC mode only). When Color
Mode is set to User, the following
settings are available:
•
•
•
USER-R–(Red setting)
USER-G–(Green setting)
USER-B–(Blue setting)
MENU
E x i t
S e l
A d j
3 Press
/
or ENTER to enter the
•
•
Zoom Mode—Wide, Cinema, Normal, or
Zoom (Only Wide and Normal are
available in PC mode).
3DNR—Standard, Strong, Auto, Off, or
Weak. If your TV is operating in an area
where only weak signals are available,
selecting one of these noise reduction
settings may improve reception.
CHANNEL menu.
4 Press
/
.
to select Channel Label, then
press
5 Press
/
to move the cursor, then press
/
one or more times to select each
character for the channel label.
6 Press TV MENU one or more times to close
4 Press TV MENU one or more times to close
the menu.
the menu.
Adjusting picture settings
Adjusting audio settings
To adjust picture settings:
To adjust audio settings:
1 Press TV MENU on the remote control, then
1 Press TV MENU on the remote control, then
press
/
to highlight the PICTURE icon.
press
/
to highlight the Audio icon. The
The PICTURE menu opens.
Audio menu opens.
PC Mode
PC Mode
P C
A U D I O
C o n t r a s t
57
55
S o u n d M o d e
B a s s
S t a n d a r d
B r i g h t n e s s
5 0
5 0
5 0
C o l o r M o d e
Tr e b l e
Z o o m M o d e
W i d e
B a l a n c e
M T S
A u d i o O n l y
S P D I F Ty p e
M o n o
P C M
MENU
E x i t
S e l
A d j
MENU
S e l
A d j
E x i t
TV Mode
TV Mode
P I C T U R E
A U D I O
P i c t u r e M o d e
C o n t r a s t
B r i g h t n e s s
T i n t
S t a n d a r d
S o u n d M o d e
B a s s
S t a n d a r d
6 2
4 8
5 0
3 8
2 5
5 0
5 0
5 0
Tr e b l e
B a l a n c e
M T S
A u d i o O n l y
S P D I F Ty p e
C o l o r
M o n o
P C M
S h a r p n e s s
C o l o r M o d e
Z o o m M o d e
3 D N R
C o o l
W i d e
S t a n d a r d
MENU
S e l
A d j
E x i t
MENU
S e l
A d j
E x i t
2 Press
menu.
/
or ENTER to enter the Audio
2 Press
/
or ENTER to enter the PICTURE
menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 15 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
3 Press
/
to select one of the following
•
Restore Default—Select this option, then
press or ENTER to restore your TV
combo to the factory settings.
settings, then press
/
to change the
/
setting. You can select:
4 Press TV MENU one or more times to close
•
Sound Mode—Standard, Movie, Music,
the menu.
Sports, or Personal.
Bass
•
•
•
•
Setting the parental controls
Treble
Balance
To set the parental controls:
MTS—Mono, Stereo, or SAP (MTS is
only available in TV mode).
Audio Only—When Audio Only is
1 Press TV MENU on the remote control, then
press
/
to highlight the ADVANCED
icon. The ADVANCED menu opens.
•
highlighted, press
/
or ENTER. The
TV Mode
image disappears but the sound remains.
Press any button to restore the image.
•
SPDIF TYPE—PCM or Raw.
4 Press TV MENU one or more times to close
A D VA N C E D
the menu.
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
Adjusting advanced settings
O f f
To adjust advanced settings:
1 Press TV MENU on the remote control, then
press
/
to highlight the ADVANCED
icon. The ADVANCED menu opens.
MENU
E x i t
S e l
A d j
PC Mode
2 Press
/
or ENTER to enter the
ADVANCED menu.
3 Press
/
/
to select System Lock, then
or ENTER. The Password box
A D VA N C E D
press
S l e e p T i m e r
O f f
O f f
opens.
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
P a s s w o r d
-
-
-
-
4 Enter the password with the number buttons
on the remote control (the default password
is 0000). The System Lock sub-menu opens.
MENU
E x i t
S e l
A d j
TV Mode
A D VA N C E D
C h a n g e P a s s w o r d
A D VA N C E D
S y s t e m L o c k
T V R a t i n g
O f f
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
N o n e
E
E
O f f
MENU
E x i t
S e l
A d j
MENU
E x i t
S e l
A d j
5 Press
/
to select one of the following
settings, then press
/
to change the
2 Press
/
or ENTER to enter the
setting. You can select:
ADVANCED menu.
•
Change Password—For more
3 Press
/
to select one of the following
information, see “Changing the password”
on page 16.
settings, then press
setting. You can select:
/
to change the
•
System Lock—On or Off. (TV Rating,
Movie Rating, Canada Eng, or Canada
Fre are only available when System Lock
is set to On.)
TV Rating—For more information, see
“Setting the parental control level - TV
ratings” on page 16.
Movie Rating—For more information, see
“Setting parental control levels-Movie
ratings” on page 16.
•
•
•
Sleep Timer—Select the sleep time you
want.
Closed Caption—Off, CC1, CC2, CC3,
CC4, Text1, Text2, Text3, or Text4.
System Lock—For additional
information, see “Setting the parental
controls” on page 15.
•
•
•
Picture Enhance—Off or On.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 16 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
•
•
Canada Eng—For more information, see
“Setting the parental control level -
Setting the parental control level - TV ratings
To set TV parental control levels:
Canadian English ratings” on page 18.
1 Press TV MENU on the remote control, then
Canada Fre—For more information, see
“Setting the parental control level -
Canadian French ratings” on page 18.
press
/
to highlight the ADVANCED
icon. The ADVANCED menu opens.
6 Press TV MENU one or more times to close
the menu.
Changing the password
A D VA N C E D
To change the password:
S l e e p T i m e r
O f f
O f f
1 Press TV MENU on the remote control, then
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
press
/
to highlight the ADVANCED
O f f
icon. The ADVANCED menu opens.
MENU
E x i t
A D VA N C E D
S e l
A d j
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
2 Press
/
or ENTER to enter the
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
ADVANCED menu.
3 Press
/
/
to select System Lock, then
or ENTER. The Password box
press
opens.
MENU
E x i t
S e l
A d j
P a s s w o r d
-
-
-
-
2 Press
/
or ENTER to enter the
ADVANCED menu.
4 Enter the password with the number buttons
on the remote control (the default password
is 0000). The System Lock sub-menu opens.
3 Press
/
/
to select System Lock, then
or ENTER. The Password box
press
opens.
P a s s w o r d
-
-
-
-
A D VA N C E D
C h a n g e P a s s w o r d
4 Enter the password with the number buttons
on the remote control (the default password
is 0000). The System Lock sub-menu opens.
S y s t e m L o c k
T V R a t i n g
O f f
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
N o n e
E
E
A D VA N C E D
MENU
E x i t
S e l
A d j
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
O f f
5 Press
/
/
to select TV Rating, then press
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
N o n e
E
E
or ENTER. The TV Rating sub-menu
opens.
MENU
E x i t
S e l
A d j
A D VA N C E D
A L L
F V
V
S
L
D
5 Press
/
to select Change Password,
Y
U
U
U
U
U
U
then press
/
or ENTER. The New
Y 7
G
U
Password box opens.
P G
1 4
M A
U
U
U
U
U
U
U
U
U
U
U
N e w P a s s w o r d
-
-
-
-
E N T E R k e y : B l o c k / U n b l o c k
MENU
S e l
A d j
E x i t
6 Press the number buttons to input the new
password. The New Password box opens
again.
6 Press
/
/
/
to select the TV rating
you want, then press ENTER to block or
unblock the rating. B indicates the rating is
blocked, U indicates the rating is unblocked.
7 Press the number buttons to input the new
password again. The password is changed.
8 Press TV MENU one or more times to close
the menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 17 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
TV Ratings are as follows:
4 Enter the password with the number buttons
on the remote control (the default password
is 0000). The System Lock sub-menu opens.
Rating
Description
Y
All children
Y7
G
Children over seven years of age
General audiences
A D VA N C E D
C h a n g e P a s s w o r d
PG
14
MA
Parental guidance suggested
Parents strongly cautioned
Mature audiences only
S y s t e m L o c k
T V R a t i n g
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
O f f
N o n e
E
E
Some of the age-based TV Parental Guidelines
ratings also have content-based ratings.
MENU
E x i t
S e l
A d j
Rating
Description
5 Press
/
to select Movie Rating, then
FV
L
Fantasy violence
Adult language
press
/
to select the movie rating you
want to block.
S
Sexual situations
Violence
Movie Ratings are as follows:
V
D
Sexually suggestive dialog
Rating
Description
7 Press TV MENU one or more times to close
None
G
Not rated
the menu.
General audiences
PG
Parental guidance suggested. Some
material may not be suitable for
children
Note
•
If System Lock is not set to On, the
configuration settings do not work.
•
You can view blocked programs by entering the
password. This temporarily switches off the
parental lock. To reactivate the parental lock
settings, turn off the TV. When the TV is turned
on again, your parental lock settings are
reactivated.
PG13
R
Parental guidance strongly suggested.
Some material may not be suitable for
children under 13 years of age
Restricted. Not suitable for children
under 17 years of age unless
accompanied by a parent or guardian
Setting parental control levels-Movie ratings
NC17
X
Not suitable for children under 17
years of age
To set movie parental control levels:
Adults only
1 Press TV MENU on the remote control, then
press
/
to highlight the ADVANCED
6 Press TV MENU one or more times to close
icon. The ADVANCED menu opens.
the menu.
Note
•
If System Lock is not set to On, the
configuration settings do not work.
A D VA N C E D
•
You can view blocked programs by entering the
password. This temporarily switches off the
parental lock. To reactivate the parental lock
settings, turn off the TV. When the TV is turned
on again, your parental lock settings are
reactivated.
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
MENU
E x i t
S e l
A d j
2 Press
/
or ENTER to enter the
ADVANCED menu.
3 Press
/
/
to select System Lock, then
or ENTER. The Password box
press
opens.
P a s s w o r d
-
-
-
-
17
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 18 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Setting the parental control level - Canadian
English ratings
6 Press TV MENU one or more times to close
the menu.
To set Canadian English parental control
levels:
Note
•
If System Lock is not set to On, the
configuration settings do not work.
1 Press TV MENU on the remote control, then
•
You can view blocked programs by entering the
password. This temporarily switches off the
parental lock. To reactivate the parental lock
settings, turn off the TV. When the TV is turned
on again, your parental lock settings are
reactivated.
press
/
to highlight the ADVANCED
icon. The ADVANCED menu opens.
A D VA N C E D
Setting the parental control level - Canadian French
ratings
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
To set Canadian French parental control
levels:
O f f
1 Press TV MENU on the remote control, then
press
/
to highlight the ADVANCED
icon. The ADVANCED menu opens.
MENU
E x i t
S e l
A d j
2 Press
/
or ENTER to enter the
ADVANCED menu.
A D VA N C E D
3 Press
/
/
to select System Lock, then
or ENTER. The Password box
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
press
opens.
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
P a s s w o r d
-
-
-
-
4 Enter the password with the number buttons
on the remote control (the default password
is 0000). The System Lock sub-menu opens.
MENU
E x i t
S e l
A d j
2 Press
/
or ENTER to enter the
ADVANCED menu.
3 Press
/
/
to select System Lock, then
or ENTER. The Password box
press
A D VA N C E D
opens.
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
O f f
P a s s w o r d
-
-
-
-
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
N o n e
E
E
4 Enter the password with the number buttons
on the remote control (the default password
is 0000). The System Lock sub-menu opens.
MENU
E x i t
S e l
A d j
5 Press
press
/
to select Canada Eng, then
/
to select the rating you want to
A D VA N C E D
block.
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
O f f
Canadian English MPAA Ratings are as
follows:
N o n e
E
E
Rating
Description
E
Not rated
MENU
E x i t
S e l
A d j
C
Children
C8+
G
Children 8 years and above
General audience
5 Press
press
/
/
to select Canada Fre, then
to select the rating you want to
block.
PG
14+
18+
Parental guidance suggested
14 years old and above
Adult programming
18
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 19 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Canadian French Ratings are as follows:
•
•
•
V-Position—Adjusts the vertical position
of the OSD menu.
OSD Time Out—Adjusts the display time
of the OSD menu.
Transparency—Adjusts the transparency
of the OSD menu.
Rating
Description
E
Not rated
G
Children
4 Press TV MENU one or more times to close
8ans+
13ans+
16ans+
18ans+
Children 8 years and above
Children 13 years and above
Children 16 years and above
Adult programming
the menu.
Adjusting the PC settings
To adjust the settings for PC mode:
6 Press TV MENU one or more times to close
1 Press TV MENU on the remote control, then
the menu.
press
/
to highlight the GEOMETRY
icon. The GEOMETRY menu opens.
Note
•
If System Lock is not set to On, the
configuration settings do not work.
•
You can view blocked programs by entering the
password. This temporarily switches off the
parental lock. To reactivate the parental lock
settings, turn off the TV. When the TV is turned
on again, your parental lock settings are
reactivated.
G E O M E T RY
A u t o A d j u s t
H - P o s i t i o n
V- P o s i t i o n
C l o c k
5 0
3 9
5 1
1 6
P h a s e
Adjusting OSD settings
To adjust advanced settings:
MENU
E x i t
S e l
A d j
1 Press TV MENU on the remote control, then
press
/
to highlight the OSD icon. The
OSD menu opens.
2 Press
/
or ENTER to enter the
GEOMETRY menu.
PC Mode
3 Press
/
to select one of the following
settings, then press
setting. You can select:
/
to change the
O S D
•
Auto Adjust—Press
/
or ENTER to
M e n u L a n g u a g e
H - P o s i t i o n
E n g l i s h
1 5 S e c .
activate Auto Adjust.
H-Position
V-Position
Clock
5 0
5 0
V- P o s i t i o n
•
•
•
•
O S D T i m e O u t
Tr a n s p a r e n c y
4
Phase
4 Press TV MENU one or more times to close
MENU
S e l
A d j
E x i t
the menu.
PC input signal chart
TV Mode
The following chart shows the suggested screen
resolutions.
O S D
Format
Resolution
Freq. (Hz)
M e n u L a n g u a g e
E n g l i s h
1 5 S e c .
5 0
5 0
H - P o s i t i o n
VGA
640 × 480
720 × 400
60
70
V- P o s i t i o n
O S D T i m e O u t
Tr a n s p a r e n c y
4
SVGA
800 × 600
800 × 600
60
72
XGA
1024 × 768
60
MENU
S e l
A d j
E x i t
WXGA
1280 × 720
1360 × 768
60
60
2 Press
/
/
or ENTER to enter the OSD
If your computer is using a video resolution other
than those listed above, your TV displays
“Unsupported.” If this message appears, adjust
your PC display to one of the above resolutions.
menu.
3 Press
to select one of the following
settings, then press
/
to change the
setting. You can select:
•
Menu Language—Select the language
for the on-screen display. Choices include
English, French, or Spanish.
•
H-Position—Adjusts the horizontal
position of the OSD menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 20 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
•
To completely stop DVD playback, press
Changing your computer's video
resolution
STOP twice.
6 Press
to remove the DVD.
The following example shows Windows XP
settings. Even if you use a different Windows
operating system, the basic setup methods are
similar. For changing video resolution on a
Macintosh computer, refer to your Macintosh
documentation.
Playing an audio CD
To play an audio CD:
1 Press POWER
2 Press INPUT, press
to turn on your TV.
to select DVD,
/
To change your computer's video resolution:
then press ENTER. You can also press DVD
on the remote control to select the DVD
mode. The DVD startup screen appears on
the screen.
1 Click Start, Control Panel, then double-click
Display. The Display Properties dialog box
opens.
Note
Playback starts automatically if a CD is already
loaded
3 Insert a CD into the disc slot, with the label
facing forward.
4 Press
(Play/Pause). The tracks play in
numerical order.
5 Press STOP to stop playback, or press
(Play/Pause) to pause playback.
6 Press
to remove the CD.
To select a specific track for playback:
•
After you insert a CD and your TV finishes
reading the disc, press the number buttons to
enter the track number you want to play, then
press ENTER.
2 Click the Settings tab.
3 Change the screen resolution setting to a
supported resolution (the ideal resolution for
your TV is 1360 × 768).
4 Click OK, then click Yes to save your
changes.
Using the DVD player
Playing a DVD
Using DVD repeat play
You can repeat chapters, titles, or the entire
DVD.
To play a DVD:
1 Press POWER
2 Press INPUT, press
to turn on your TV.
to select DVD,
To use repeat play:
1 While the DVD is playing, press REPEAT to
select what you want to repeat. You can
select:
/
then press ENTER. You can also press DVD
on the remote control to select the DVD
mode. The DVD startup screen appears on
the screen.
•
•
•
CHAPTER (repeats the current chapter)
TITLE (repeats the current title)
ALL (repeats the entire DVD)
Note
2 To stop repeat playback, do one of the
Playback starts automatically if a DVD is already
loaded
following:
•
Press REPEAT until ALL disappears from
3 Insert a DVD into the disc slot, with the label
facing forward. The DVD player reads the
DVD and displays the opening menu.
the screen.
•
•
Press
STOP twice.
Eject the DVD.
4 Press
/
and
/
to highlight a menu
item, then press ENTER.
5 During playback:
Using CD repeat play
You can repeat tracks or the entire CD using
repeat play.
•
Press
(Play/Pause) to pause
playback. Press it again to resume
playback.
To use repeat play:
1 While the CD is playing, press REPEAT to
select what you want to repeat. You can
select:
•
•
Press
to fast-reverse, and press
to fast-forward.
to skip to the previous
Press
chapter, or press
chapter.
•
•
ALL (repeats the current CD)
TRACK (repeats the current track)
to skip to the next
2 To stop repeat playback, do one of the
•
To play in slow motion (forward or
reverse).
following:
20
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 21 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
•
Press REPEAT until ALL disappears from
Searching for a specified time on a DVD
the screen.
To search for a specified time on a DVD:
•
•
Press
STOP twice.
1 After inserting a DVD, press T.SEARCH one
or more times until one of the following boxes
opens.
Eject the CD.
Using a DVD title menu
If a DVD has two or more titles and the DVD has
a title menu, you can use this menu to select a
title for playback.
To use a DVD title menu:
1 While the DVD is playing, press DVD TITLE.
2 Press
/
or
/
to select a title.
3 Press ENTER. Playback starts with the title
you selected.
Using a DVD menu
If the DVD has a menu, you can use this menu to
select features such as the subtitle or audio
language.
2 Use the number buttons to enter the amount
of time you want to skip on the DVD, then
press ENTER.
To use a DVD menu:
1 While the DVD is playing, press DVD MENU.
Searching for a specific track on a CD
2 Press
/
or
/
to select a feature,
To search for a specific track:
then press ENTER.
1 After inserting a CD, press T.SEARCH one or
more times until the following box opens.
If another screen opens, repeat Step 2 and
Step 3 to select a feature.
Searching for a DVD title or chapter
To search for a DVD title or chapter:
1 After inserting a DVD, press T.SEARCH. The
2 Press a number button for the track, then
press ENTER.
following box opens.
Searching for a specified time on a CD
track
To search for a specified time on a CD track:
1 After inserting a CD, press T.SEARCH one or
more times until one of the following boxes
opens.
2 Press
/
to select a title, then press a
number button for the title, then press
ENTER.
3 Repeat Step 2 and Step 3 to select a chapter
number.
2 Use the number buttons to enter the amount
of time you want to skip on the track, then
press ENTER.
Changing the DVD audio language
If a DVD has multiple audio languages, you can
change the language.
To change the audio language:
1 Press AUDIO. The on-screen display (OSD)
shows the current audio language.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 22 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
2 If multiple audio languages are available,
press AUDIO to cycle through the available
languages.
5 Press
one or more times to go back to the
previous menu.
6 To close the menu, press
to highlight the
Exit icon, then press ENTER.
Selecting the subtitle language
If a DVD has subtitles, you can change the
subtitle language displayed.
To change the subtitle language for the
currently playing DVD:
1 Press SUBTITLE one or more times to cycle
through the available subtitle languages.
Note
This feature only works if the DVD was created
with multiple audio languages. When you choose
an audio language, you temporarily override the
audio language setting.
2 To turn off subtitles, press SUBTITLE until
TURN OFF SUBTITLE appears on the
screen.
Note
Tip
Changing the subtitle language using this method
only affects the DVD currently being played. When
the DVD is removed or your TV is turned off, the
subtitle language reverts to the language setting
specified through the DVD player's main menu.
The audio language can also be changed through
the DVD player's main menu or the DVD’s own
audio settings.
Turning DVD subtitles on and off
Tip
To turn subtitles on and off:
The subtitle language can also be changed
through the DVD player's main menu or the DVD’s
own subtitle settings.
1 While your TV is in DVD mode, press SETUP.
The General Setup icon
is highlighted.
Changing the DVD display mode
To change your TV's display mode:
-- GENERAL SETUP PAGE --
1 While your TV is in DVD mode, press SETUP.
TV DISPLAY
CAPTIONS
WIDE
OFF
The General Setup icon
is highlighted.
SCREEN SAVER ON
LAST MEMORY ON
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
GOTO GENERAL SETUP PAGE
SCREEN SAVER ON
2 Press ENTER. The General Setup Page
LAST MEMORY ON
opens.
GOTO GENERAL SETUP PAGE
-- GENERAL SETUP PAGE --
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
CAPTIONS
OFF
ON
OFF
ON
SCREEN SAVER ON
LAST MEMORY ON
OFF
ON
OFF
3 Press
/
to highlight CAPTIONS, then
press ENTER.
4 Press
/
to highlight ON or OFF, then
press ENTER.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 23 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
2 Press ENTER. The General Setup Page
Turning the screen saver on and off
opens.
To turn the screen saver on and off:
1 While your TV is in DVD mode, press SETUP.
The General Setup icon
is highlighted.
-- GENERAL SETUP PAGE --
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER ON
WIDE
OFF
CAPTIONS
OFF
ON
OFF
ON
SCREEN SAVER ON
LAST MEMORY ON
OFF
ON
OFF
LAST MEMORY ON
GOTO GENERAL SETUP PAGE
2 Press ENTER. The General Setup Page
3 Press
/
to select TV DISPLAY, then
opens.
press ENTER.
4 Press
/
to highlight the type of display
-- GENERAL SETUP PAGE --
you want, then press ENTER.
•
NORMAL/PS
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
CAPTIONS
OFF
ON
OFF
ON
SCREEN SAVER ON
LAST MEMORY ON
OFF
ON
OFF
Widescreen images are shown on the
screen, but with some parts automatically cut
off the sides.
•
NORMAL/LB
3 Press
/
to highlight SCREEN SAVER,
then press ENTER.
4 Press
/
to highlight ON or OFF, then
press ENTER.
Widescreen images are shown on the screen
with black bars on the top and bottom of the
screen.
5 Press
one or more times to go back to the
previous menu.
6 To close the menu, press
to highlight the
•
WIDE
Exit icon, then press ENTER.
Using DVD last memory
Your TV can remember where a DVD stopped
playing when your TV is turned off. When your
DVD combo is turned on and you start DVD
playback, playback resumes at the point where it
stopped.
Widescreen images fill the entire screen.
5 Press one or more times to go back to the
previous menu.
To use last memory:
1 While your TV is in DVD mode, press SETUP.
6 To close the menu, press
to highlight the
The General Setup icon
is highlighted.
Exit icon, then press ENTER.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
LAST MEMORY ON
GOTO GENERAL SETUP PAGE
23
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 24 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
2 Press ENTER. The General Setup Page
3 Press
/
to highlight Speaker Setup, then
opens.
press ENTER. The Speaker Setup Page
opens.
-- GENERAL SETUP PAGE --
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
4 Press
/
to highlight DOWNMIX, then
CAPTIONS
OFF
ON
press ENTER.
OFF
ON
SCREEN SAVER ON
LAST MEMORY ON
5 Press
/
to highlight LT/RT or STEREO,
OFF
ON
OFF
then press ENTER.
•
LT/RT-On a disc recorded with a
multichannel soundtrack, the output signal
will be incorporated into the left and right
channel.
•
STEREO-On a disc recorded with a
multichannel soundtrack, the output signal
will be incorporated into stereo.
3 Press
/
to highlight LAST MEMORY,
then press ENTER.
6 Press
one or more times to go back to the
4 Press
/
to highlight ON or OFF, then
previous menu.
press ENTER.
7 To close the menu, press
to highlight the
5 Press
one or more times to go back to the
Exit icon, then press ENTER.
previous menu.
6 To close the menu, press
to highlight the
Setting up DVD Dolby Digital
Exit icon, then press ENTER.
To set up Dolby Digital:
Setting up DVD speaker output
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
To set up speaker output:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER ON
WIDE
OFF
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
LAST MEMORY ON
SCREEN SAVER ON
LAST MEMORY ON
GOTO GENERAL SETUP PAGE
2 Press
/
to select the Audio icon
,
GOTO GENERAL SETUP PAGE
then press ENTER. The Audio Setup Page
opens.
2 Press
/
to select the Audio icon
,
then press ENTER. The Audio Setup Page
opens.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 25 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
3 Press
/
to highlight DOLBY DIGITAL
2 Press
/
to select the Audio icon
,
SETUP, then press ENTER. The Dolby
then press ENTER. The Audio Setup Page
Digital Setup Page opens.
opens.
4 Press
/
to highlight DUAL MONO or
D.R.C, then press ENTER.
•
•
DUAL MONO-This is the output mode for
the left and right signals of the selected
audio output. If it is set to MIXED MONO,
the function only works when the DVD
uses 5.1-channel sound.
D.R.C-Select to adjust the linear
compression rate to obtain different
compression results for the signals.
3 Press
/
to highlight CHANNEL
EQUALIZER, then press ENTER. The
Channel Equalizer Page opens.
4 Press
/
to highlight EQ TYPE, then
press ENTER.
5 Press
/
to select one of the following
preset equalizer patterns, then press
5 Press
/
to highlight STEREO, LEFT
ENTER:
MONO, RIGHT MONO, or MIXED MONO,
then press ENTER.
•
•
•
•
•
•
•
•
NONE
ROCK
POP
6 Press
ENTER.
/
to change the setting, then press
LIVE
7 Press
one or more times to go back to the
DANCE
TECHNO
CLASSIC
SOFT
previous menu.
8 To close the menu, press
to highlight the
Exit icon, then press ENTER.
Using the DVD equalizer
6 Press
one or more times to go back to the
previous menu.
You can select preset graphic equalizer patterns
according to the genre of the music being
played. You can also adjust the equalizer
settings.
7 To close the menu, press
to highlight the
Exit icon, then press ENTER.
Setting up DVD 3D sound
To use the equalizer:
1 While your TV is in DVD mode, press SETUP.
To set up 3D sound:
The Setup Menu opens.
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER ON
WIDE
OFF
TV DISPLAY
CAPTIONS
WIDE
OFF
LAST MEMORY ON
SCREEN SAVER ON
LAST MEMORY ON
GOTO GENERAL SETUP PAGE
GOTO GENERAL SETUP PAGE
25
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 26 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
2 Press
/
to select the Audio icon
,
2 Press
/
to select the Video icon
,
then press ENTER. The Audio Setup Page
then press ENTER. The Video Setup Page
opens.
opens.
- - VIDEO SETUP PAGE - -
SHARPNESS
MID
HIGH
MEDIUM
LOW
BRIGHTNESS
00
00
CONTRAST
BLACK LEVEL
NORMAL
LIGHTER
3 Press
/
to highlight one of the following
3 Press
/
to highlight 3D PROCESSING,
options, then press ENTER to select:
then press ENTER. The 3D Processing Page
•
SHARPNESS—Sets the sharpness level.
opens.
Press
/
to highlight HIGH, MEDIUM,
or LOW, then press ENTER to select.
BRIGHTNESS—Sets the brightness
•
•
•
level. Press
/
to adjust the level,
then press ENTER to confirm.
CONTRAST—Sets the contrast level.
Press
/
to adjust the level, then
press ENTER to confirm.
BLACK LEVEL—Sets the black level.
Press
LIGHTER, then press ENTER to select.
4 Press one or more times to go back to the
previous menu.
/
to highlight NORMAL or
5 To close the menu, press
to highlight the
Exit icon, then press ENTER.
Setting a DVD parental password
4 Press
/
to select one of the following
To set or change a password:
options, then press ENTER:
1 While your TV is in DVD mode, press SETUP.
•
•
V SURR-Turns virtual surround sound on
The Setup Menu opens.
and off.
REVERB MODE-Select a reverb mode.
5 Press
/
to select from the options for the
mode you have chosen, then press ENTER.
-- GENERAL SETUP PAGE --
6 Press one or more times to go back to the
previous menu.
TV DISPLAY
CAPTIONS
SCREEN SAVER ON
WIDE
OFF
7 To close the menu, press
to highlight the
Exit icon, then press ENTER.
LAST MEMORY ON
Setting DVD video options
GOTO GENERAL SETUP PAGE
To set up video options:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
LAST MEMORY ON
GOTO GENERAL SETUP PAGE
26
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 27 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
2 Press
/
to select the Password Setup
2 Press
then press
Page opens.
/
to select the Preferences icon
icon , then press ENTER. The Password
ENTER. The Preferences
Setup Page opens.
-- PREFERENCE PAGE --
AUDIO
ENG
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
SUBTITLE OFF ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
3 Press
/
to select one of the following
options, then press ENTER:
•
PW MODE-Select ON to turn on the
password feature. PARENTAL is dim and
cannot be selected. Select OFF to turn off
the password feature. PARENTAL can be
selected.
PASSWORD CHANGE-Select to change
the password. The preset factory
password is 99999.
PARENTAL-If the parental lock feature is
turned on, this lets you block and unblock
DVD ratings. You cannot play DVDs that
are rated higher than the setting you
select.
DISC MENU ENG ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
•
•
DEFAULT
3 Press
RESET
/
to select one of the following
options, then press ENTER:
•
AUDIO-Changes the DVD audio
language. If the language you select is
available on the DVD, the audio is played
in that language. If the language you
select is not available on the DVD, the
original audio is played.
4 Press
/
to select from the options for the
item you have chosen, then press ENTER.
5 Press one or more times to go back to the
previous menu.
6 To close the menu, press
to highlight the
•
SUBTITLE-Changes the DVD subtitle
language. If the language you select is
available on the DVD, subtitles are
displayed in that language. If the
language you select is not available on
the DVD, the original subtitle language is
displayed.
DISC MENU-Changes the language for
the disc menu. If the language you select
is available on the DVD, the disc menu is
displayed in that language. If the
language you select is not available on
the DVD, the disc menu is displayed in the
original language.
DEFAULT-Resets the DVD player settings
to the default settings.
Exit icon, then press ENTER.
Changing DVD preferences
You can change preferences only when the
player is in STOP mode and the PW mode is set
to OFF on the Password Setup page.
•
•
To change preferences:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
4 Press
/
to select from the options for the
item you have chosen, then press ENTER.
SCREEN SAVER ON
5 Press one or more times to go back to the
previous menu.
LAST MEMORY ON
6 To close the menu, press
to highlight the
GOTO GENERAL SETUP PAGE
Exit icon, then press ENTER.
Maintaining your TV
Cleaning the cabinet
Wipe the front panel and other exterior surfaces
of your TV with a soft cloth lightly dampened with
lukewarm water. Never use a solvent or alcohol
to clean your TV. Do not spray insecticide near
your TV. Such chemicals may cause damage
and discoloration to the exposed surfaces.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 28 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Care and handling of discs
Problem
Solution
Handling discs
Stripes on picture Check for interference from other electronic
devices, such as radios and televisions, and
keep magnetic or electronic devices away from
your TV.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.
Bad stereo or
SAP sound
A long broadcast distance, or interference from
radio waves, can cause bad sound reception. If
so, change the mode to Mono.
Remote control
does not work
Remove obstacles between the remote control
and the player. Point the remote control at your
TV's IR sensor. Install fresh batteries.
“Unsupported”
appears on the
screen
Check the resolution and frequency of your
computer, and adjust it to the optimum
resolution for this TV: 1360×768 at 60Hz.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
“No Sync”
appears on the
screen
Make sure that the cable is firmly connected to
the computer and TV.
Image is not clear Adjust the phase control.
Cleaning discs
Image is not
centered
Adjust the horizontal control.
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion. Before
playing, clean the disc with a clean cloth. Wipe
the disc from the center out.
Picture has a few A few bright or dark dots on an LCD screen is
bright or dark
dots
normal. It does not affect the operation of this
TV.
DVD
Problem
Solution
No sound
•
•
Make sure that your TV or amplifier is
working correctly.
Make sure that the amplifier is set to
receive DVD signal output.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
No image
•
•
Make sure that your TV is working
correctly.
Make sure the color system is set
correctly.
Bad sound
quality
•
•
Make sure that the audio output mode is
set correctly.
Note
Never operate this product immediately after
moving it from a cold location to a warm location.
Leave it for two or three hours without operating it.
If you use this product in such a situation, it may
damage tapes, discs, or internal parts.
Make sure that the audio connection
between your TV and amplifier (if used)
is secure.
Disc cannot be
played
•
Make sure that the disc is inserted with
the label facing forward.
•
•
Clean the disc.
Troubleshooting
Moisture has condensed in the player.
Remove the disc and leave the player on
for about an hour to dry out.
TV
The player
Disconnect the power plug, then reconnect it.
Problem
Solution
doesn't operate
normally
No picture or
sound
•
•
Check all cable connections.
Make sure that your TV is turned on.
Remote control
does not work
•
•
•
Remove obstacles between the remote
control and the player.
Picture is OK, but Check the volume level and mute setting.
no sound
Point the remote control at your TV's IR
sensor.
Install fresh batteries.
Sound is OK, but
no color
•
•
Check the color control and adjust it.
Check the program's color features
because it may be a black and white
movie.
Specifications
The picture has
overlapped
images
Make sure that the antenna is installed correctly.
If not, adjust the antenna toward the
broadcasting station.
LCD
Panel
26" WIDE TFT LCD
1366 × 768
160°/150°
Resolution
Picture has snow
•
Check the antenna and its connection. If
there are problems, correct them. If all
connections are tight, the problem may
be with a faulty antenna or cable.
Check car traffic or neon signs that may
disrupt the image.
Viewing angle
Contrast ratio
Brightness (cd/m2)
800:1(Typ.)
400 (Typ.)
•
28
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 29 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
Dimensions
With stand
26.4 × 19.4 × 9.1 in.
(670 × 494 × 230 mm)
Without stand
24.4 × 17.8 × 3.6 in.
(670 × 452 × 98 mm)
Weight
TV
26.57 lbs. (12.05 kg)
NTSC
TV standard
Tuning system
Electronic tuning
system
Frequency range
Stereo
VHF/UHF
BTSC
CATV
125 channels
100-240V AC, 50/60 Hz
150 W
Power
Input
Consumption (Max.)
Output
Sound
6W×2
Terminals
A/V in
Video, S-Video, Audio
L/R
Component
PC in
Y, Pb (Cb), Pr (Cr)
D-SUB 15-pin RGB in
HDMI
HDMI compliant (type
A connector)
Antenna in
F-type
NTSC
DVD player
Signal System
Playable discs
DVD:12cm
CD:12cm
Operating
conditions
Temperature
Humidity
5°C~35°C
20%~80% RH
Atmospheric pressure 86KPa~106 KPa
Legal notices
Macrovision statement
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Copyright
© 2008 Insignia. Insignia and the Insignia logo are
trademarks of Best Buy Enterprise Services, Inc. Other
brands and product names are trademarks or registered
trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.
For service and support call (877) 467-4289.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 30 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
30
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 31 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
•
Products where the factory applied serial number
has been altered or removed
One-Year Limited Warranty
REPAIR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS YOUR EXCLUSIVE REMEDY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES
FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL
APPLY AFTER THE WARRANTY PERIOD. SOME STATES,
PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new NS-LTDVD26-09CA (“Product”), that
the Product shall be free of defects in the original
manufacture of the material or workmanship for a period of
one (1) year from the date of your purchase of the Product
(“Warranty Period”). This Product must be purchased from
an authorized dealer of Insignia brand products and
packaged with this warranty statement. This warranty does
not cover refurbished Product. If you notify Insignia during
the Warranty Period of a defect covered by this warranty that
requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date
you purchased the Product. The purchase date is printed on
the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the
Product with new or rebuilt parts; or (2) replace the Product
at no charge with new or rebuilt comparable products or
parts. Products and parts replaced under this warranty
become the property of Insignia and are not returned to you.
If service of Products or parts are required after the Warranty
Period expires, you must pay all labor and parts charges.
This warranty lasts as long as you own your Insignia Product
during the Warranty Period. Warranty coverage terminates if
you sell or otherwise transfer the Product.
Contact Insignia:
For customer service please call 1-877-467-4289
INSIGNIA™ is a trademark of Best Buy Enterprise Services,
Inc.
Distributed by Best Buy Purchasing, LLC.
Insignia, 7601 Penn Avenue South, Richfield, Minnesota,
U.S.A.
How to obtain warranty service?
If you purchased the Product at a retail store location, take
your original receipt and the Product to the store you
purchased it from. Make sure that you place the Product in
its original packaging or packaging that provides the same
amount of protection as the original packaging. If you
purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the
web site. Make sure that you put the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging.
To obtain in-home warranty service for a television with a
screen 25 inches or larger, call 1-888-BESTBUY. Call
agents will diagnose and correct the issue over the phone or
will have an Insignia-approved repair person dispatched to
your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States and Canada.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning
strikes
•
•
•
•
•
•
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including
the antenna
•
Plasma display panel damaged by static
(non-moving) images applied for lengthy periods
(burn-in).
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
•
•
Products sold as is or with all faults
Consumables, such as fuses or batteries
31
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 32 Tuesday, April 1, 2008 1:25 PM
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
32
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 33 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Ensemble lecteur DVD/TV ACL de 26 po Insignia
NS-LTDVD26-09CA
Table des matières
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Informations sur la sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Fonctionnalités. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Accessoires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Face avant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Face arrière . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Télécommande. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Installation des piles de la télécommande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Utilisation de la télécommande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Installation du téléviseur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Connexion d’une antenne, de la TV câblée, ou de la TV par satellite . . . . . . . . . . . . . . . . . . 40
Connexion d’un périphérique vidéo standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Connexion d’un périphérique vidéo à composantes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Connexion d'une sortie audio numérique. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Connexion à un ordinateur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Utilisation des commandes de base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Mise en Marche/Arrêt du téléviseur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Réglage du volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Changement de mode vidéo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Fonctionnement du téléviseur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Sélection de la source du signal TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Changement de canal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Utilisation des menus d’écran. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Mémorisation des canaux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Modification des paramètres des canaux. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Affichage ou masquage manuel d’un canal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Étiquetage d’un canal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Réglage des paramètres de l’image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Réglage des paramètres audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Réglage des paramètres avancés . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Configuration du contrôle parental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Réglage des paramètres OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Réglage des paramètres du PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Tableau du signal d’entrée du PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Modification de la résolution vidéo de l'ordinateur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Utilisation du lecteur DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Lecture d’un DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Lecture d'un CD audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Lecture en boucle d'un DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Lecture en boucle d'un CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Utilisation du menu titre d'un DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Utilisation du menu d'un DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Recherche d'un titre ou d'un chapitre d'un DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Recherche d'un instant spécifié sur un DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Recherche d'une piste spécifique sur un CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Recherche d'un instant spécifique sur la piste d’un CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Modification de la langue audio du DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Activation ou désactivation des sous-titres du DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Sélection de la langue des sous-titres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Modification du mode d'affichage DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Activation ou désactivation des sous-titres du DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Utilisation de la dernière position mémorisée du DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Configuration de la sortie des haut-parleurs du lecteur DVD . . . . . . . . . . . . . . . . . . . . . . . . . 57
Configuration de la fonction Dolby Digital du lecteur DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Utilisation de l’égalisateur du lecteur DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Configuration du son 3D du lecteur DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Réglage des options vidéo du DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Configuration du mot de passe du contrôle parental d’un DVD . . . . . . . . . . . . . . . . . . . . . . . 59
Modification des préférences pour les DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Entretien du téléviseur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Problèmes et solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Spécifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Garantie limitée d’un an. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Introduction
Félicitations d’avoir acheté ce produit Insignia de haute qualité. Le modèle NS-LTDVD26-09CA
représente la dernière avancée technologique dans la conception de téléviseur et de lecteur DVD
et a été conçu pour des performances et une fiabilité exceptionnelles.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 34 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
SÉCURITÉ POUR LES ENFANTS
L’endroit et la façon d’utiliser un téléviseur à écran plat
font toute la différence
Tout en profitant de ce nouveau produit, garder à
l’esprit les conseils de sécurité qui suivent
Ce qui est important
L’expérience de divertissement avec un système de cinéma maison correspond à une
tendance tous les jours plus importante et les achats de téléviseurs plus grands se
développent. Toutefois, souvent les téléviseurs ne sont pas positionnés sur des meubles
adaptés ou installés conformément aux recommandations du fabricant. Notre société et
l’industrie des produits électroniques de consommation ont pris l’engagement de faire du
divertissement à la maison une activité agréable et sans danger.
Les téléviseurs qui sont placés sur des buffets, des bibliothèques, des étagères, des bureaux,
des haut-parleurs, des coffres ou des tables roulantes inadaptés peuvent être renversés et
être source de blessures.
La sécurité d’abord
•
Un meuble TV d’une taille déterminée ne peut recevoir
tous les téléviseurs. N’utiliser qu’un meuble TV conçu pour
le poids du téléviseur.
•
Veiller à lire avec attention et à bien comprendre toutes les
instructions fournies pour une utilisation adaptée de ce
produit.
•
•
Ne pas laisser les enfants monter sur le meuble de ce
système de divertissement ni jouer avec les téléviseurs.
Ne pas mettre les téléviseurs sur des meubles qui peuvent
être utilisés facilement comme escabeau, tels qu’une
commode.
•
•
Il faut se souvenir que les enfants peuvent s’exciter lors de
la visualisation d'une émission, surtout avec un téléviseur
d'une très grande taille. Veiller à positionner ou installer le
téléviseur à un endroit où il ne peut pas être poussé, tiré ou
renversé.
Prendre soin d’acheminer tous les cordons et câbles afin
qu’ils ne puissent être tirés ou saisis par les enfants curieux.
Montage mural
En cas de montage mural du téléviseur, ne pas oublier :
•
un meuble TV d’une taille déterminée ne peut recevoir tous les téléviseurs. N’utiliser
qu’un support mural conçu pour le poids du téléviseur et qui a été recommandé par son
fabricant, ce manuel ou par un laboratoire indépendant (UL, CSA ou ETL) comme étant
adapté à ce téléviseur;
•
•
d’observer toutes les instructions des fabricants du téléviseur et du support mural;
en cas de doute sur sa capacité à monter un support mural en toute sécurité pour le
téléviseur, l’utilisateur doit faire appel à un installateur professionnel;
•
veiller à ce que le mur sur lequel est monté le téléviseur est
adapté. Certains supports muraux ne sont pas conçus pour
être montés sur des murs adossés à des montants en acier ou
des parpaings. En cas d’incertitude faire appel à un installateur
professionnel.
•
les téléviseurs peuvent être lourds. Au moins deux personnes sont requises pour
effectuer une installation de support mural qui présente toute sécurité.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 35 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Conserver les instructions
Informations sur la sécurité
Conserver les instructions de sécurité et de
fonctionnement pour toute référence ultérieure.
ATTENTION
Respecter les avertissements et les instructions.
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
Respecter tous les avertissements sur cet
appareil ainsi que dans les instructions
Avertissement
d’utilisation. Toutes les instructions d’utilisation
et de fonctionnement doivent être observées.
Afin de réduire le risque de choc électrique, ne pas enlever le
couvercle (ou le panneau arrière). Aucune pièce interne ne
peut être réparée par l'utilisateur. Confier l’entretien à un
personnel qualifié.
Eau et humidité
Ne pas utiliser cet appareil près de l’eau. Par
exemple près d’une baignoire, un lavabo, un
évier ou un baquet à linge, dans un sous-sol
humide ou près d’une piscine.
Afin de réduire le risque d’incendie et de choc électrique, ne
pas exposer ce téléviseur à la pluie ou l’humidité.
Attention
Pour éviter des chocs électriques, introduire le plot le plus
large de la prise du cordon d’alimentation dans la fente
correspondante de la prise secteur. Si la prise ne s'adapte
pas, contacter un électricien afin qu’il remplace la prise
secteur inadéquate. Ne pas modifier la prise du cordon
d’alimentation, sinon ce dispositif de sécurité serait inopérant.
Nettoyage
Débrancher l'appareil avant tout nettoyage. Ne
pas utiliser de nettoyant liquide ou en aérosol.
Utiliser un chiffon humide pour nettoyer
l’extérieur de l’appareil.
Ventilation
Ce symbole indique qu'une tension
dangereuse, constituant un risque de choc
électrique, est présente dans cet appareil. Cette
étiquette est située au dos de l’appareil.
Les fentes et ouvertures au dos et au bas du
boîtier sont prévues pour la ventilation, pour
assurer un fonctionnement fiable de l'appareil et
le protéger contre toute surchauffe. Ces
ouvertures ne doivent être ni bloquées ni
Ce symbole indique que d'importantes
instructions concernant le fonctionnement et la
maintenance figurent dans la documentation
qui accompagne cet appareil.
obstruées. Elles ne doivent jamais être bloquées
en installant l’appareil sur un lit, un sofa, un tapis
ou toute autre surface semblable. Ne pas placer
l’appareil à proximité ou au-dessus d’un
radiateur ou d’une source de chaleur. Ne pas
installer l’appareil dans un meuble encastré tel
qu’une bibliothèque ou sur une étagère, sauf si
une ventilation adéquate a été prévue ou si les
instructions du fabricant ont été respectées.
Sécurité du laser
Cet appareil utilise un laser. Seul un technicien
qualifié doit retirer le châssis ou entreprendre
une réparation sur cet appareil, compte tenu du
risque de lésions oculaires.
Chaleur
Avertissements
Veiller à installer l’appareil à l’écart de sources
de chaleur, telles que radiateurs, bouches de
chaleur, fours ou autres équipements (y compris
les amplificateurs) qui produisent de la chaleur.
•
L’utilisation de commandes ou de réglages ou de
performance de procédures autres que celles spécifiées
dans le présent document pourrait entraîner une exposition
dangereuse aux radiations.
•
Émission de rayon laser visible et invisible en cas
d’ouverture ou de dispositif de verrouillage défectueux.
Ne pas regarder directement le rayonnement laser.
Le laser est situé à l’intérieur, près du mécanisme du
lecteur.
L'appareil doit être branché sur une prise secteur protégée
par mise à la masse.
Afin d’éviter des blessures, cet appareil doit être raccordé
fermement au sol/mur conformément aux instructions de ce
manuel.
Toujours placer cet appareil au sol ou sur une surface
assez solide, nivelée et stable pour soutenir son poids.
L’installation de cet appareil requiert une habilité
particulière et doit être faite uniquement par du personnel
qualifié.
Mise à la terre ou polarisation
•
•
Ne pas chercher à modifier le dispositif de
sécurité de la prise polarisée ou de type mise à
la terre. Une prise polarisée comporte deux
plots, un plus large que l'autre. Une prise de
type mise à la terre est composée de deux plots
et d’un troisième de mise à la terre. Le plot large
de mise à la terre a été prévu pour la sécurité de
l’utilisateur. Si la fiche ne s'adapte pas à la prise
secteur, contacter un électricien afin qu’il
remplace la prise inadéquate.
•
•
•
•
Protection du cordon d’alimentation
•
L’utilisateur ne doit pas essayer d'entreprendre l’installation
lui-même. Insignia n'assume aucune responsabilité pour
une installation faite incorrectement ou qui pourrait
entraîner un accident ou des blessures.
Les cordons d’alimentation électrique doivent
être acheminés afin que personne ne puisse
marcher dessus et qu’aucun objet posé dessus
ne vienne les entraver. Prêter particulièrement
attention aux points de branchement du cordon
à la prise secteur, aux barres multiprises et à
l’endroit d’où le cordon sort de l’appareil.
Attention
La prise d’alimentation CA est également un dispositif de
déconnexion et doit toujours être facilement accessible.
Périphériques
Lire les instructions
N'utiliser que des périphériques recommandés
par Insignia.
Lire toutes les instructions de sécurité et de
fonctionnement avant d’utiliser cet appareil.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 36 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Support
•
si l’appareil fonctionne anormalement en
appliquant les instructions d’utilisation. Ne
régler que les commandes décrites dans les
instructions d’utilisation; en effet, le réglage
incorrect d’autres commandes pourrait
provoquer des dégâts, entraînant souvent
d'importantes réparations par un technicien
qualifié pour rétablir le fonctionnement
normal de l’appareil;
si l’appareil est tombé ou s’il est endommagé
de quelque façon que ce soit;
si l'appareil présente une détérioration
marquée de ses performances.
Ne pas placer cet appareil sur une
table roulante, un pied, un trépied, un
support ou une table instables.
L’appareil pourrait tomber et
provoquer dans sa chute des
blessures et subir de graves dommages.
N’utiliser qu’avec la table roulante, le pied, le
trépied, le support ou la table recommandés par
le fabricant ou vendus avec l'appareil. Pour
installer l’appareil sur un support mural,
observer les instructions du fabricant et utiliser
un accessoire de montage recommandé par
celui-ci. Si l’appareil est installé sur un meuble à
roulettes, déplacer l’ensemble avec précaution.
Un arrêt brusque, l’utilisation d’une force
excessive et des surfaces irrégulières risquent
de déstabiliser l’ensemble et de le renverser.
•
•
Contrôle de sécurité
Après toute opération d’entretien ou réparation
de cet appareil, demander au technicien
d’effectuer les contrôles de sécurité de routine
pour vérifier qu’il fonctionne correctement.
Foudre
Source d’alimentation
Pour protéger l’appareil pendant un orage ou s’il
se trouve inutilisé et sans surveillance pendant
une période prolongée, le débrancher de la prise
secteur et débrancher l'antenne ou la connexion
au réseau câblé. Ceci évitera d’endommager
l’appareil en cas de foudre et de variations de
tension du secteur.
Cet appareil doit fonctionner conformément à la
source d’alimentation indiquée sur l'étiquette. En
cas d’incertitude sur la tension d'alimentation
électrique de la maison, consulter le revendeur
du téléviseur ou la compagnie d'électricité.
Protection de l’écran
Entretien
L’écran de l'appareil est en verre. Ne pas laisser
tomber l’appareil ou heurter l’écran en verre. Si
l’écran se brise, prendre garde à ne pas se
blesser avec les morceaux de verre.
L’utilisateur ne doit pas essayer de réparer cet
appareil lui-même; en effet, son ouverture ou le
démontage des couvercles peuvent l’exposer à
des tensions dangereuses et à d'autres dangers.
Toutes les réparations doivent être réalisées par
un personnel qualifié.
Pixels morts
Le panneau ACL contient presque 3 millions de
transistors en couches minces, ce qui fournit
une qualité vidéo d'une netteté exceptionnelle. Il
peut arriver que des pixels morts apparaissent à
l'écran sous forme de points bleus, verts ou
rouges. Ces pixels morts ne nuisent pas aux
performances du téléviseur et ne sont pas
considérés comme des défauts.
Pièces de rechange
Si des pièces doivent être remplacées, vérifier
que le technicien a utilisé des pièces de
rechange spécifiées par le fabricant qui ont les
mêmes caractéristiques que les pièces d’origine.
Toute substitution par des pièces non autorisées
risque de provoquer un incendie, un choc
électrique, des blessures ou d'autres dangers.
Mise à la masse d’une antenne extérieure
Si cet appareil est connecté à une antenne
extérieure ou à un réseau câblé, vérifier que
l'antenne ou la connexion au réseau câblé est
mis à la terre afin de bénéficier d'une certaine
protection contre les sautes de tension et les
charges électrostatiques. L'article 810 du Code
national de l’électricité (CNE), ANSI/NFPA
Nº 70, fournit des informations relatives à la
mise à la terre correcte du mât et du support, la
mise à la terre du fil conducteur de l’antenne à
l’unité de décharge de l’antenne, la taille des
conducteurs de mise à la terre, l’emplacement
de l’unité de décharge de l’antenne, la
Surcharge
Les prises secteur et les rallonges ne doivent
pas être surchargées, cela pourrait provoquer
des risques d'incendie ou de choc électrique.
Pénétration d’objets ou de liquides
N’enfoncer en aucun cas un objet dans les
ouvertures de l’appareil car il pourrait entrer en
contact avec des tensions dangereuses ou
provoquer un court-circuit à l'origine d'un
incendie ou d'un choc électrique. Ne jamais
répandre un liquide sur le téléviseur.
connexion aux conducteurs de terre ainsi que
les normes en matière de prise de terre.
Dégâts nécessitant un entretien
Débrancher l’appareil de la prise secteur et
utiliser les services d’un technicien qualifié dans
les conditions suivantes :
7
6
•
•
•
lorsque le cordon d’alimentation est effiloché
ou la prise endommagée;
si un liquide a été répandu ou des objets ont
pénétré dans l’appareil;
si l’appareil a été exposé à la pluie ou à l’eau;
5
4
3
1
2
36
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 37 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Face avant
1
2
Équipement de la compagnie d'électricité
Système de mise à la terre des électrodes de la
compagnie d’électricité
3
4
5
6
7
Serre-fils de mise à la terre
Conducteurs de mise à la terre
Unité de décharge de l’antenne
Serre-fil de mise à la terre
Fil conducteur de l’antenne
MENU
INPUT
VOL
VOL
CH
Avis à l'installateur de TV câblée
Le présent avis a pour objet de rappeler à
l'installateur de systèmes de télévision par câble
que l'article 820-40 du Code national de
l'électricité contient des recommandations
relatives à la mise à la masse de l'appareil et, en
particulier, stipule que la masse du câble doit
être connectée au système de mise à la terre de
l'immeuble, aussi près que possible du point
d'entrée du câble.
CH
POWER
Instructions relatives au recyclage de cet appareil
Ce téléviseur contient des matériaux qui
peuvent être recyclés et réutilisés. Quand ce
téléviseur aura atteint sa durée d’utilisation
maximale, des sociétés spécialisées pourront le
démonter afin de récupérer les matériaux
réutilisables et minimiser les matériaux mis au
rebut. Se débarrasser d’un vieux téléviseur
conformément à la réglementation locale.
#
Élément
Description
1
Fente d’insertion Insérer un DVD ou un CD pour passer en
des disques
mode DVD et lire le disque.
2
3
4
5
Touche
PRÉCÉDENT
Permet de revenir à la piste ou au chapitre
précédent.
Fonctionnalités
Accessoires
Touche SUIVANT Permet de passer à la piste ou au chapitre
suivant.
Touche ARRÊT
Permet d’interrompre la lecture d'un
disque.
Vérifier que les accessoires suivants sont
présents dans la boîte :
Touche
Permet de basculer en mode DVD et de
LECTURE/PAUSE commencer ou arrêter momentanément la
•
•
•
Cordon d’alimentation
Télécommande et piles
Manuel de l'utilisateur
lecture d’un DVD ou CD.
6
7
8
Témoin Disque
inséré
Ce témoin allumé indique qu’un DVD ou un
CD est inséré dans son logement.
Touche
Permet d’éjecter le disque inséré dans son
OUVRIR/FERMER logement.
Témoin
Marche-Arrêt/
Attente
S’allume quand l’appareil est branché sur
une prise secteur. Quand le téléviseur est
sous tension, le témoin marche-arrêt est
bleu. Quand le téléviseur est en mode
attente, le témoin marche-arrêt est rouge.
9
Capteur
infrarouge
Reçoit les signaux de la télécommande. Ne
pas obstruer la transmission des signaux.
10 Touche MENU
11 Touche ENTRÉE
Permet d’afficher le menu TV.
Touche de sélection du signal d’entrée
audio-vidéo. Il est possible de sélectionner
TV, AV1, AV2, S-Vidéo, YPBPR, DVD,
HDMI ou PC.
12 Touches
Permet de régler le volume.
Volume +/-
13 Touches CH +/-
Permet de changer le canal.
14 Touche
Permet de mettre l’appareil sous et hors
MARCHE/ARRÊT tension ou de le mettre en mode attente.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 38 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Face arrière
Télécommande
RF INPUT
RF INPUT
#
Description
1
2
3
4
5
6
ÉCOUTEURS (prise pour casque d’écoute)
ENTRÉE 2 (ENTRÉE VIDÉO et AUDIO G/D)
Entrée HDMI
ENTRÉE VGA du PC
E
ENTRÉE AUDIO du PC
ENTRÉE (Y, Cb/Pb, Cr/Pr,AUDIO G et
AUDIO D)
7
8
9
Sortie COAXIALE (audio numérique)
SORTIE AUDIO
#
Touche
Description
1
Permet de mettre l’appareil sous et hors
tension ou de le mettre en mode attente.
ENTRÉE 1 (ENTRÉE S-VIDÉO, VIDÉO et
AUDIO G/D)
(Marche/Arrêt)
10
11
Prise de MISE À NIVEAU (Destinée à la
maintenance)
2
3
4
TV
Permet de basculer en mode TV.
Permet de basculer en mode DVD.
DVD
ENTRÉE RF
Touches
numériques
Permettent de saisir directement les
numéros de canaux, les chapitres du DVD
et les pistes du CD.
5
SOURDINE
Permet de mettre le son en sourdine.
Appuyer de nouveau sur cette touche pour
rétablir le son.
6
7
VOL +/-
Permet de régler le volume.
MTS/SAP
Permet de sélectionner le mode Stereo
(Stéréo), Mono ou SAP.
8
SOUS-TITRES En mode TV, permet de sélectionner le
CODÉS
mode de sous-titres codés.
9
MENU TV
Permet d’accéder au menu d’écran du
téléviseur.
10
Permettent de parcourir les menus
d'écran.
,
,
,
11
ENTRÉE
Permet de confirmer les sélections.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 39 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
2 Insérer deux piles AAA dans le
#
Touche
Description
compartiment. Veiller à ce que les pôles + et
– des piles coïncident avec les repères + et –
figurant à l'intérieur du compartiment.
12
Permet d'effectuer une recherche arrière
sur un DVD ou un CD.
(Retour
rapide)
(Avance
Permet d'effectuer une recherche avant sur
un DVD ou un CD.
rapide)
13
14
Permet de revenir à la piste ou au chapitre
précédent.
Permet de passer à la piste ou au chapitre
suivant.
(Retour
(Avance
arrière)
rapide)
Permet d’arrêter la lecture du DVD ou du
CD.
ARRÊT
15
16
17
TITRE DU DVD Permet d’ouvrir le menu titre du DVD.
MENU DU DVD Permet d’ouvrir le menu d'un DVD.
RÉPÉTITION
Permet de répéter une section d’un DVD
ou d’un CD.
3 Remettre le couvercle en place.
18
19
20
AUDIO
Permet de changer la langue audio du
DVD.
Remarques
•
•
•
•
Ne pas mélanger différents types de piles.
Ne pas mélanger des piles neuves et usagées.
Retirer les piles quand elles sont déchargées.
Les produits chimiques des piles peuvent
provoquer des démangeaisons. Si les piles
fuient, nettoyer le compartiment avec un
chiffon. Si les produits chimiques sont au
contact de la peau, nettoyer immédiatement.
Retirer les piles si la télécommande n’est pas
utilisée pendant une période prolongée.
Permet d’éjecter le disque de son
logement.
(Ouvrir)
ENTRÉE
Permet d’ouvrir le menu de la source
d'entrée.
21
22
23
24
ZOOM
Permet de modifier le mode zoom.
Permet de changer le canal.
•
CH
/
RAPPEL
Permet de revenir au canal précédent.
AFFICHAGE
Permet d’afficher l’information sur la
source d’entrée.
25
26
27
IMAGE
AUDIO
Permet de sélectionner le mode image.
Permet de modifier le mode sonore.
Appuyer sur cette touche pour commencer
la lecture d’un DVD ou d’un CD. L’appuyer
de nouveau pour interrompre la lecture
d’un DVD ou d’un CD momentanément.
(Lecture/pause)
28
29
30
31
Permet la lecture d’un DVD au ralenti vers
l’avant ou l’arrière.
(ralenti)
CONFIGURATION
Permet d'accéder au menu de
configuration du DVD.
A-B
Permet de programmer une lecture en
boucle.
RECHERCHE
Permet de localiser un point à partir duquel
PAR LA DURÉE démarrer la lecture.
32
33
RETOUR
Permet de revenir au menu précédent.
SOUS-TITRES Permet de changer la langue des
sous-titres du DVD. N’est pas disponible
sur tous les DVD.
Installation des piles de la télécommande
Pour installer les piles de la télécommande :
1 Retirer le couvercle du compartiment des
piles.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 40 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Utilisation de la télécommande
Installation du téléviseur
Connexion d’une antenne, de la TV câblée,
ou de la TV par satellite
Pour utiliser la télécommande :
•
Pointer directement la télécommande vers le
téléviseur, avec un angle horizontal inférieur
à 60° (30° de chaque côté) et avec un angle
vertical inférieur à 30° par rapport au capteur
infrarouge sur le devant du téléviseur, à une
distance maximale de 26,25 pieds (8 m) du
téléviseur.
RF INPUT
RF INPUT
30
30
Connexion d’une antenne externe, de la TV
câblée, ou de la TV par satellite
1 Retirer le cache de la prise au dos de
l’appareil (1).
2 Brancher le câble d’antenne (2) d’une
antenne, de la TV câblée ou d’un récepteur
satellite (3) à la prise d’entrée RF ( RF
INPUT) du téléviseur.
Attention
Ne pas exposer la télécommande à des liquides,
au soleil ou à des chocs. Ne pas mélanger
différents types de piles.
3 Replacer le cache de la prise au dos de
l’appareil.
4 Allumer le téléviseur.
5 Appuyer sur INPUT (Entrée), puis sur
pour sélectionner TV.
Remarques
•
Des objets entre la télécommande et le capteur
/
peuvent obstruer le signal de la télécommande.
La portée de la télécommande peut être
affectée par la lumière directe du soleil ou un
éclairage puissant dirigé sur le capteur de la
télécommande. Dans ce cas, modifier l’angle
de la lumière ou de l’appareil ou rapprocher la
télécommande de la lentille du capteur.
•
40
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 41 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
3 Connecter les câbles audio RCA (7) à la
Connexion d’un périphérique vidéo
standard
prise de sortie audio du périphérique vidéo et
aux prises de la rangée supérieure AUDIO L
(Audio G) et AUDIO R (Audio D) sur le côté
de l'appareil.
Remarque
L’appareil peut accepter de multiples sources
d'entrée vidéo. Pour des connexions vidéo
temporaires ou à accès facile, utiliser les prises
latérales (AV2). Pour des connexions plus
permanentes, utiliser les prises arrière (AV1).
4 Allumer le téléviseur.
5 Appuyer sur INPUT, puis sur
sélectionner AV2.
/
pour
Connexion d’un périphérique S-Vidéo
standard aux prises d’entrée AV1 (AV1
INPUT) :
1 Retirer le cache de la prise (1) au dos de
l’appareil.
2 Connecter un câble S-Vidéo (3) à la prise de
sortie S-Vidéo d'un périphérique S-Vidéo (5)
et à la prise S-VIDEO (1) au dos de
l'appareil.
RF INPUT
3 Connecter les câbles audio RCA (2) aux
prises de sortie audio du périphérique
S-Vidéo et aux prises AUDIO L et AUDIO R
au dos de l'appareil.
4 Allumer le téléviseur.
5 Appuyer sur INPUT (Entrée)
/
pour
sélectionner S-Video (S-Vidéo).
Connexion d’un périphérique vidéo à
composantes
RF INPUT
Connexion d’un périphérique vidéo standard
aux prises d’entrée AV1 (AV1 INPUT) :
1 Retirer le cache de la prise (1) au dos de
l’appareil.
2 Connecter un câble vidéo RCA (4) à un
périphérique vidéo standard (5) et à la prise
VIDEO au dos de l'appareil.
3 Connecter les câbles audio RCA (2) à la
prise de sortie audio du périphérique vidéo et
aux prises de la rangée supérieure AUDIO L
(Audio G) et AUDIO R (Audio D) au dos de
l'appareil.
4 Allumer le téléviseur.
5 Appuyer sur INPUT (Entrée), puis sur
pour sélectionner AV1.
/
Connexion d’un périphérique vidéo standard
aux prises d’entrée AV2 (AV2 INPUT) :
Connexion d’une source vidéo à balayage
progressif ou TVHD aux prises Y/Pb/Pr :
1 Retirer le cache de la prise (1) au dos de
l’appareil.
1 Retirer le cache de la prise (1) au dos de
2 Connecter un câble vidéo RCA (8) à un
périphérique vidéo standard (5) et à la prise
VIDEO sur le côté de l'appareil.
l’appareil.
2 Connecter un câble vidéo à composantes (4)
au périphérique vidéo à balayage progressif
ou TVHD (3) et aux prises Y/Pb/Pr (1) au dos
de l'appareil.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 42 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
3 Connecter les câbles audio RCA (2) aux
prises de sortie audio du périphérique vidéo
à balayage progressif ou TVHD et aux prises
de la rangée inférieure AUDIO L (Audio G) et
AUDIO R (Audio D) au dos de l'appareil.
Connexion à un ordinateur
4 Allumer le téléviseur.
5 Appuyer sur INPUT (Entrée), puis sur
pour sélectionner YPBPR.
/
RF INPUT
Connexion d'une sortie audio numérique
Il est possible de connecter la sortie audio du
téléviseur à un amplificateur numérique.
RF INPUT
Raccordement de l’appareil à l’ordinateur par
les connexions VGA :
1 Retirer le cache de la prise (1) au dos de
l’appareil.
2 Connecter un câble VGA (4) au port VGA de
l'ordinateur (6) et à la prise VGA INPUT
(Entrée VGA) au dos de l'appareil.
3 Connecter un câble audio (5) à la prise audio
de l'ordinateur (6) et à la prise AUDIO VGA
INPUT (Entrée audio VGA) au dos de
l'appareil.
Connexion à un amplificateur audio
numérique :
4 Allumer le téléviseur.
1 Retirer le cache de la prise au dos de
5 Appuyer sur INPUT (Entrée), puis sur
pour sélectionner PC.
/
l’appareil.
2 Connecter un câble coaxial (2) à
l'amplificateur (3) et à la prise COAXIAL [1]
au dos de l'appareil.
Connexion de l’appareil à l’ordinateur ou à
autre périphérique HDMI avec une prise
HDMI :
1 Retirer le cache de la prise au dos de
l’appareil (1).
2 Connecter un câble HDMI (2) au port HDMI
du périphérique HDMI (3) et à la prise HDMI
INPUT (Entrée HDMI) au dos de l'appareil.
3 Allumer le téléviseur.
4 Appuyer sur INPUT (Entrée) et
sélectionner HDMI.
/
pour
Remarque
Quand l’ordinateur est en mode d’attente, le
téléviseur se met hors tension. Si le téléviseur ne
se met pas sous tension lorsque l'ordinateur sort
du mode Attente, appuyer sur POWER
(Marche/Arrêt) du téléviseur ou de la
télécommande.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 43 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Utilisation des commandes Fonctionnement du
de base
téléviseur
Mise en Marche/Arrêt du téléviseur
Sélection de la source du signal TV
Pour mettre le téléviseur sous et hors
tension :
Pour sélectionner la source du signal TV :
1 Appuyer sur TV MENU (Menu TV), puis sur
1 Appuyer sur POWER (Marche/Arrêt) sur le
côté du téléviseur ou sur la télécommande.
Le témoin POWER/STANDBY
/
pour mettre en surbrillance l'icône
CHANNEL (Canal). Le menu CHANNEL
s’affiche.
(Marche/Arrêt/Attente) devient bleu.
2 Pour éteindre le téléviseur, appuyer de
nouveau sur POWER. Le témoin
POWER/STANDBY devient rouge.
C H A N N E L
T V S o u r c e
C AT V
Réglage du volume
A u t o S c a n
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
Le volume sonore peut être ajusté à l'aide des
commandes du panneau latéral de l’appareil ou
de la télécommande.
- - - - - -
H i d e
Pour régler le volume :
1 Appuyer sur VOL + ou sur VOL - pour
MENU
E x i t
S e l
A d j
augmenter ou diminuer le volume.
2 Appuyer sur MUTE (Sourdine) pour mettre le
son en sourdine, puis appuyer de nouveau
sur cette touche pour rétablir le son.
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu CHANNEL (Canal).
3 Appuyer sur pour sélectionner TV
/
Source (Source TV), puis sur
/
pour
Changement de mode vidéo
sélectionner Air (Hertzien) ou CATV (TV
Le téléviseur peut accepter des sources vidéo
multiples.
câblée).
•
•
Air (Hertzien) – Canaux VHF/UHF.
CATV – Canaux de TV câblée.
Pour sélectionner le mode vidéo :
•
Appuyer sur INPUT (Entrée) une ou plusieurs
fois pour sélectionner le mode vidéo
souhaité, puis appuyer sur ENTER (Entrée).
Sélections possibles :
4 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
Changement de canal
•
•
•
•
•
•
•
•
TV
AV1
AV2
S-Vidéo
Y DR DB
DVD
HDMI
PC (VGA)
Pour changer de canal :
•
Appuyer sur CH + ou sur CH – sur le côté de
l’appareil ou sur CH
ou CH
de la
télécommande.
Pour entrer un numéro de canal
directement :
•
Appuyer sur les touches numériques de la
télécommande.
Pour revenir au canal précédent :
Appuyer sur RECALL (Rappel).
•
Utilisation des menus d’écran
Utiliser la télécommande pour naviguer dans les
menus d’écran.
Pour utiliser les menus d’écran :
1 Appuyer sur INPUT (Entrée) de la
télécommande pour sélectionner la source
vidéo.
2 Appuyer sur TV MENU (Menu TV) de la
télécommande. Le menu d’écran s’affiche.
3 Appuyer sur
/
pour mettre en
surbrillance l'icône PICTURE (Image),
AUDIO, ADVANCED (Avancé), OSD ou sur
CHANNEL (Canal), puis appuyer sur
/
ou sur ENTER (Entrée) pour accéder au
menu.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 44 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
4 Appuyer sur
/
pour mettre en
3 Appuyer sur
paramètres suivants, puis sur
changer le paramètre. Sélections possibles :
/
pour sélectionner un des
surbrillance un paramètre, puis sur
pour modifier le paramètre.
/
/
pour
5 Appuyer sur TV MENU pour fermer le menu.
•
TV Source (Source TV) – Air (Hertzien)
ou CATV (TV câblée).
Auto Scan (Balayage automatique) –
Pour plus d’informations, voir
« Mémorisation des canaux », à la page
44.
Mémorisation des canaux
•
Pour pouvoir sélectionner des canaux à l'aide
des touches CH, l’appareil doit d’abord
mémoriser les canaux. Lorsque l’appareil
mémorise les canaux, il recherche ceux qui
diffusent un signal, puis enregistre en mémoire
les informations relatives aux canaux.
•
Channel No. (N° du canal) – Appuyer sur
/
pour sélectionner le canal.
•
Channel Label (Étiquette de canal) –
Pour plus d’informations, voir
Pour la mémorisation automatique des
canaux :
« Étiquetage d’un canal », à la page 45.
•
Show/Hide (Afficher/Masquer) – Pour
plus d’informations, voir « Affichage ou
masquage manuel d’un canal », à la page
44.
1 Appuyer sur TV MENU (Menu TV) sur la
télécommande, puis appuyer sur
/
pour
mettre en surbrillance l'icône CHANNEL
(Canal). Le menu CHANNEL s’affiche.
4 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
Affichage ou masquage manuel d’un canal
C H A N N E L
Pour afficher ou masquer manuellement un
canal :
1 Syntoniser le téléviseur sur le canal à ajouter
ou supprimer en utilisant les touches
numériques.
T V S o u r c e
C AT V
A u t o S c a n
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
2 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
MENU
E x i t
S e l
A d j
en surbrillance l'icône CHANNEL (Canal). Le
menu CHANNEL s’affiche.
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu CHANNEL (Canal).
3 Appuyer sur
Scan (Balayage automatique), puis appuyer
sur
/
pour sélectionner Auto
C H A N N E L
/
ou sur ENTER (Entrée) pour
T V S o u r c e
C AT V
commencer le balayage automatique.
L’appareil recherche et mémorise tous les
canaux disponibles localement.
A u t o S c a n
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
4 Pour arrêter la recherche automatique,
appuyer sur TV MENU. Une fois la recherche
automatique terminée, le canal passe au
premier canal de la liste de canaux
mémorisés.
MENU
E x i t
S e l
A d j
Modification des paramètres des canaux
3 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu CHANNEL (Canal).
Pour modifier les paramètres des canaux :
4 Appuyer sur pour sélectionner
/
1 Appuyer sur TV MENU (Menu TV) de la
Show/Hide (Afficher/Masquer), puis sur
télécommande, puis sur
/
pour mettre
/
pour mettre en surbrillance Show ou
en surbrillance l'icône CHANNEL (Canal). Le
Hide.
menu CHANNEL s’affiche.
5 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
C H A N N E L
T V S o u r c e
A u t o S c a n
C AT V
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
MENU
E x i t
S e l
A d j
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu CHANNEL (Canal).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 45 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Étiquetage d’un canal
Réglage des paramètres de l’image
Pour créer une étiquette de canal :
Pour régler les paramètres de l'image :
1 Syntoniser le téléviseur sur le canal souhaité
1 Appuyer sur TV MENU (Menu TV) de la
en utilisant les touches numériques.
télécommande, puis sur
/
pour mettre
en surbrillance l’icône PICTURE (Image). Le
menu PICTURE s’affiche.
2 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
en surbrillance l'icône CHANNEL (Canal). Le
Mode PC
menu CHANNEL s’affiche.
P C
C o n t r a s t
57
55
C H A N N E L
B r i g h t n e s s
C o l o r M o d e
Z o o m M o d e
T V S o u r c e
C AT V
W i d e
A u t o S c a n
C h a n n e l N o .
C h a n n e l L a b e l
S h o w / H i d e
1
- - - - - -
H i d e
MENU
E x i t
S e l
A d j
MENU
E x i t
S e l
A d j
Mode TV
3 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu CHANNEL (Canal).
P I C T U R E
4 Appuyer sur pour sélectionner
/
Channel Label (Étiquette de canal), puis
P i c t u r e M o d e
C o n t r a s t
B r i g h t n e s s
T i n t
S t a n d a r d
6 2
4 8
5 0
3 8
2 5
appuyer sur
.
5 Appuyer sur
/
pour déplacer le curseur,
C o l o r
puis appuyer une ou plusieurs fois sur
pour sélectionner chaque caractère du
nouveau nom pour le canal.
/
S h a r p n e s s
C o l o r M o d e
Z o o m M o d e
3 D N R
C o o l
W i d e
S t a n d a r d
6 Appuyer sur TV MENU (Menu TV) une ou
MENU
S e l
A d j
E x i t
plusieurs fois pour fermer le menu.
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu PICTURE (Image).
3 Appuyer sur
paramètres suivants, puis sur
modifier le paramètre. Sélections possibles :
/
pour sélectionner un des
/
pour
•
Picture Mode (Mode Image) – Standard,
Dynamic (Dynamique), Soft (Doux) ou
Personal (Personnel).
•
•
•
•
•
•
Contrast (Contraste)
Brightness (Luminosité)
Tint (Teinte)
Color (Couleur)
Sharpness (Netteté)
Color Mode (Mode de couleur) – Cool
(Froid), Normal ou Warm (Chaud). En
mode PC, si Color Mode (Mode de
couleur) est en surbrillance, appuyer sur
/
ou sur ENTER (Entrée) pour
accéder au sous-menu du Mode de
couleur.
•
Color Mode (Mode de couleur) –
Normal, Warm (Chaud) ou Cool
(Froid). Quand le mode de couleur
est réglé sur User (Utilisateur), les
paramètres suivants sont
disponibles :
•
•
•
USER-R – (paramètre des rouges)
USER-G – (paramètre des verts)
USER-B – (paramètre des bleus)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 46 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
•
•
Zoom Mode (Mode zoom) – Wide
(Panoramique), Cinema (Cinéma),
Normal ou Zoom (En Mode PC seuls les
paramètres « Wide » et Normal sont
disponibles).
•
Audio Only (Audio uniquement) – Quand
Audio Only est en surbrillance, appuyer
sur
/
ou sur ENTER (Entrée).
L’image disparaît mais pas le son.
Appuyer sur n’importe quelle touche pour
rétablir l’image.
3DNR (Rapport de parasites de
numérisation) – Standard, Strong (Fort),
Auto (Automatique), Off (Désactivé) ou
Weak (Faible). Si le téléviseur est mis en
service dans des zones où le signal est
faible, la sélection de l’un des paramètres
de réduction de parasites peut améliorer
la réception.
•
SPDIF Type (Type SPDIF) – PCM ou
Raw (Brut).
4 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
Réglage des paramètres avancés
Pour ajuster les paramètres avancés :
4 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
Réglage des paramètres audio
en surbrillance l’icône ADVANCED
(Avancé). Le menu ADVANCED s’affiche.
Pour ajuster les paramètres audio :
Mode PC
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
en surbrillance l’icône Audio (Audio). Le
menu Audio (Audio) s’affiche.
A D VA N C E D
Mode PC
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
O f f
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
A U D I O
S o u n d M o d e
B a s s
S t a n d a r d
5 0
5 0
5 0
Tr e b l e
MENU
E x i t
S e l
A d j
B a l a n c e
M T S
A u d i o O n l y
S P D I F Ty p e
M o n o
P C M
Mode TV
MENU
S e l
A d j
E x i t
A D VA N C E D
Mode TV
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
A U D I O
S o u n d M o d e
B a s s
S t a n d a r d
5 0
5 0
5 0
Tr e b l e
B a l a n c e
M T S
A u d i o O n l y
S P D I F Ty p e
MENU
E x i t
S e l
A d j
M o n o
P C M
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu ADVANCED
(Avancé).
MENU
S e l
A d j
E x i t
3 Appuyer sur
paramètres suivants, puis sur
changer le paramètre. Sélections possibles :
/
pour sélectionner un des
/
pour
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu Audio (Audio).
•
•
•
Sleep Timer (Arrêt différé) – Pour
sélectionner le délai souhaité avant l'arrêt
différé.
Closed Caption (Sous-titres
codés) – Off (Désactivés), CC1, CC2,
CC3, CC4, Text1, Text2, Text3 ou Text4.
System Lock (Verrouillage du
système) – Pour plus d’informations, voir
« Configuration du contrôle parental », à
la page 47.
Picture Enhance (Amélioration de
l’image) – Off (Désactivé) ou On
(Activé).
3 Appuyer sur
paramètres suivants, puis sur
changer le paramètre. Sélections possibles :
/
pour sélectionner un des
/
pour
•
Sound Mode (Mode Son) – Standard,
Movie (Film), Music (Musique), Sports
ou Personal (Personnel).
•
•
•
•
Bass (Graves)
Treble (Aigus)
Balance
MTS – Mono, Stereo (Stéréo) ou SAP
(MTS n’est disponible qu’en mode TV).
•
46
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 47 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
•
Restore Default (Rétablir les valeurs par
•
System Lock (Verrouillage du système) –
On (Activé) ou Off [Désactivé] (TV
Rating [classification TV], Movie
Rating [classification films], Canada
Eng [Canada anglophone], ou Canada
Fre [Canada francophone] ne sont
disponibles que lorsque System Lock est
réglé sur On).
défaut) – Sélectionner cette option, puis
appuyer sur
/
ou sur ENTER
(Entrée) pour rétablir les paramètres
d'usine de l’appareil.
4 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
•
•
TV Rating (Classification TV) – Pour plus
d’informations, voir « Configuration du
niveau de contrôle parental -
Configuration du contrôle parental
Pour configurer les contrôles parentaux :
Classifications TV », à la page 48.
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
Movie Rating (Classification des films) –
Pour plus d’informations, voir
« Configuration des niveaux de contrôle
parental pour la classification des films »,
à la page 49.
en surbrillance l’icône ADVANCED
(Avancé). Le menu ADVANCED s’affiche.
Mode TV
•
•
Canada Eng (Canada anglophone) –
Pour plus d’informations, voir
« Configuration du niveau de contrôle
parental - Classifications du Canada
anglophone », à la page 50.
Canada Fre (Canada francophone) –
Pour plus d’informations, voir
A D VA N C E D
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
« Configuration du niveau de contrôle
parental - Classifications du Canada
francophone », à la page 50.
6 Appuyer sur TV MENU (Menu TV) une ou
MENU
E x i t
S e l
A d j
plusieurs fois pour fermer le menu.
Modification du mot de passe
2 Appuyer sur
/
ou ENTER (Entrée) pour
accéder au menu ADVANCED (Avancé).
Pour modifier le mot de passe :
3 Appuyer sur pour sélectionner System
Lock (Verrouillage du système), puis sur
ou ENTER. La boîte de dialogue
Password (Mot de passe) s’affiche.
/
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
/
en surbrillance l’icône ADVANCED
(Avancé). Le menu ADVANCED s’affiche.
P a s s w o r d
-
-
-
-
A D VA N C E D
4 Saisir le mot de passe avec les touches
numériques de la télécommande (le mot de
passe par défaut est 0000). Le sous-menu
System Lock s’affiche.
S l e e p T i m e r
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
O f f
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
A D VA N C E D
MENU
E x i t
S e l
A d j
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
O f f
2 Appuyer sur
/
ou sur ENTER (Entrée)
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
N o n e
E
E
pour accéder au menu ADVANCED
(Avancé).
3 Appuyer sur
Lock (Verrouillage du système), puis sur
ou sur ENTER. La boîte de dialogue
Password (Mot de passe) s’affiche.
/
pour sélectionner System
/
MENU
E x i t
S e l
A d j
5 Appuyer sur
/
pour sélectionner un des
pour
paramètres suivants, puis sur
/
P a s s w o r d
-
-
-
-
changer le paramètre. Sélections possibles :
•
Change Password (Modifier le mot de
passe) – Pour plus d’informations, voir
« Modification du mot de passe », à la
page 47.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 48 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
4 Saisir le mot de passe avec les touches
numériques de la télécommande (le mot de
passe par défaut est 0000). Le sous-menu
System Lock s’affiche.
3 Appuyer sur
Lock (Verrouillage du système), puis sur
ou sur ENTER. La boîte de dialogue
Password (Mot de passe) s’affiche.
/
pour sélectionner System
/
P a s s w o r d
-
-
-
-
A D VA N C E D
4 Saisir le mot de passe avec les touches
numériques de la télécommande (le mot de
passe par défaut est 0000). Le sous-menu
System Lock s’affiche.
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
O f f
N o n e
E
E
A D VA N C E D
MENU
E x i t
S e l
A d j
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
O f f
5 Appuyer sur
/
pour sélectionner Change
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
N o n e
E
E
Password (Modification du mot de passe),
puis appuyer sur
boîte de dialogue New Password (Nouveau
mot de passe) s’affiche.
/
ou sur ENTER. La
MENU
E x i t
S e l
A d j
N e w P a s s w o r d
-
-
-
-
5 Appuyer sur
/
pour sélectionner TV
Rating (Classification des émissions de TV),
6 Utiliser les touches numériques pour saisir le
nouveau mot de passe. La boîte de dialogue
New Password (Nouveau mot de passe)
s’affiche de nouveau.
puis sur
/
ou sur ENTER. Le
sous-menu TV Rating s’affiche.
7 Utiliser les touches numériques pour saisir
une nouvelle fois le nouveau mot de passe.
Le mot de passe est changé.
A D VA N C E D
A L L
F V
V
S
L
D
8 Appuyer sur TV MENU (Menu TV) une ou
Y
U
U
U
U
U
U
plusieurs fois pour fermer le menu.
Y 7
G
U
Configuration du niveau de contrôle parental -
Classifications TV
P G
1 4
M A
U
U
U
U
U
U
U
U
U
U
U
Pour configurer les niveaux de contrôle
parental du téléviseur :
E N T E R k e y : B l o c k / U n b l o c k
MENU
S e l
A d j
E x i t
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
6 Appuyer sur
/
/
/
pour sélectionner
en surbrillance l’icône ADVANCED
la classification TV souhaitée, puis sur
ENTER (Entrée) pour interdire ou autoriser.la
classification. B signifie que la classification
est interdite, U signifie que la classification
est autorisée.
(Avancé). Le menu ADVANCED s’affiche.
Les classifications TV sont les suivantes :
A D VA N C E D
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
Classification Description
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
O
Enfants de tous âges
Y7
G
Enfants de sept ans ou plus
Tous publics
PG
14
MA
Contrôle parental suggéré
Mise en garde sérieuse des parents
Adultes seulement
MENU
E x i t
S e l
A d j
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu ADVANCED
(Avancé).
48
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 49 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Certaines des classifications des directives
parentales TV fondées sur une tranche d’âge
spécifique ont aussi une classification en
fonction du contenu.
4 Saisir le mot de passe avec les touches
numériques de la télécommande (le mot de
passe par défaut est 0000). Le sous-menu
System Lock s’affiche.
Classification Description
FV
G
S
Violence fictive
A D VA N C E D
Vulgarités
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
O f f
Situations à caractère sexuel
Violence
N o n e
E
E
V
D
Dialogues à caractère sexuel.
7 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
MENU
E x i t
S e l
A d j
Remarque
•
•
Si System Lock (Verrouillage du système)
n’est pas réglé sur On (Activé), les paramètres
de configuration ne fonctionneront pas.
Il est possible de voir des émissions interdites
en saisissant le mot de passe. Cela a pour effet
de désactiver temporairement le verrouillage
parental. Pour réactiver le verrouillage parental,
mettre le téléviseur hors tension. Quand le
téléviseur est de nouveau mis sous tension, les
paramètres du verrouillage parental sont
réactivés.
5 Appuyer sur
/
pour sélectionner Movie
Rating (Classification des films), puis
appuyer sur
classification à interdire.
/
pour sélectionner la
Les classifications de films sont les
suivantes :
Classification Description
None (Aucun)
Non classifié
Tous publics
Configuration des niveaux de contrôle parental
pour la classification des films
G
PG
Surveillance parentale suggérée.
Certains aspects peuvent être
totalement inappropriés pour des
enfants.
Pour configurer les niveaux de contrôle
parental de classification des films :
1 Appuyer sur TV MENU (Menu TV) de la
PG13 (13 ans et Surveillance parentale fortement
plus)
télécommande, puis sur
/
pour mettre
suggérée. Certains aspects peuvent
être totalement inappropriés pour des
enfants de moins de 13 ans.
en surbrillance l’icône ADVANCED
(Avancé). Le menu ADVANCED s’affiche.
D
Réservé aux adultes. Interdit aux
mineurs de moins de 17 ans ou
accompagnement par un adulte requis.
A D VA N C E D
NC17 (17 ans et Déconseillé aux enfants de moins de
S l e e p T i m e r
C l o s e d C a p t i o n
S y s t e m L o c k
O f f
O f f
plus)
X
17 ans.
Pour adultes uniquement.
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
6 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
Remarque
MENU
E x i t
S e l
A d j
•
•
Si System Lock (Verrouillage système) n’est
pas réglé sur On (Activé), les paramètres de
configuration ne fonctionneront pas.
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu ADVANCED
(Avancé).
Il est possible de voir des émissions interdites
en saisissant le mot de passe. Cela a pour effet
de désactiver temporairement le verrouillage
parental. Pour réactiver le verrouillage parental,
mettre le téléviseur hors tension. Quand le
téléviseur est de nouveau mis sous tension, les
paramètres du verrouillage parental sont
réactivés.
3 Appuyer sur
Lock (Verrouillage du système), puis sur
ou sur ENTER. La boîte de dialogue
Password (Mot de passe) s’affiche.
/
pour sélectionner System
/
P a s s w o r d
-
-
-
-
49
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 50 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Configuration du niveau de contrôle parental -
Classifications du Canada anglophone
6 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
Pour configurer les niveaux de contrôle
parental des classifications du Canada
anglophone :
Remarque
•
•
Si System Lock (Verrouillage système) n’est
pas réglé sur On (Activé), les paramètres de
configuration ne fonctionneront pas.
1 Appuyer sur TV MENU (Menu TV) de la
Il est possible de voir des émissions interdites
en saisissant le mot de passe. Cela a pour effet
de désactiver temporairement le verrouillage
parental. Pour réactiver le verrouillage parental,
mettre le téléviseur hors tension. Quand le
téléviseur est de nouveau mis sous tension, les
paramètres du verrouillage parental sont
réactivés.
télécommande, puis sur
/
pour mettre
en surbrillance l’icône ADVANCED
(Avancé). Le menu ADVANCED s’affiche.
A D VA N C E D
S l e e p T i m e r
O f f
O f f
Configuration du niveau de contrôle parental -
Classifications du Canada francophone
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
Pour configurer les niveaux de contrôle
parental des classifications du Canada
francophone :
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
MENU
E x i t
S e l
A d j
en surbrillance l’icône ADVANCED
(Avancé). Le menu ADVANCED s’affiche.
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu ADVANCED
(Avancé).
3 Appuyer sur
Lock (Verrouillage du système), puis sur
ou sur ENTER. La boîte de dialogue
Password (Mot de passe) s’affiche.
/
pour sélectionner System
A D VA N C E D
/
S l e e p T i m e r
O f f
O f f
C l o s e d C a p t i o n
S y s t e m L o c k
P i c t u r e E n h a n c e
R e s t o r e D e f a u l t
O f f
P a s s w o r d
-
-
-
-
4 Saisir le mot de passe avec les touches
numériques de la télécommande (le mot de
passe par défaut est 0000). Le sous-menu
System Lock s’affiche.
MENU
E x i t
S e l
A d j
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu ADVANCED
(Avancé).
3 Appuyer sur
Lock (Verrouillage du système), puis sur
ou sur ENTER. La boîte de dialogue
Password (Mot de passe) s’affiche.
/
pour sélectionner System
A D VA N C E D
C h a n g e P a s s w o r d
/
S y s t e m L o c k
T V R a t i n g
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
O f f
N o n e
E
E
P a s s w o r d
-
-
-
-
4 Saisir le mot de passe avec les touches
numériques de la télécommande (le mot de
passe par défaut est 0000). Le sous-menu
System Lock s’affiche.
MENU
E x i t
S e l
A d j
5 Appuyer sur
/
pour sélectionner Canada
Eng (Canada anglophone), puis appuyer sur
/
pour sélectionner la classification à
interdire.
Les classifications MPAA du Canada
anglophones sont les suivantes :
A D VA N C E D
C h a n g e P a s s w o r d
S y s t e m L o c k
T V R a t i n g
M o v i e R a t i n g
C a n a d a E n g
C a n a d a F r e
O f f
Classification Description
N o n e
E
E
E
Non classifié
C
Enfants
C8+
G
Enfants de 8 ans et plus
Tous publics
MENU
E x i t
S e l
A d j
PG
14+
18+
Contrôle parental suggéré
Enfants de 14 ans et plus
Programmation pour adultes
50
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 51 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
5 Appuyer sur
/
pour sélectionner Canada
3 Appuyer sur
paramètres suivants, puis sur
changer le paramètre. Sélections possibles :
/
pour sélectionner un des
Fre (Canada francophone), puis appuyer sur
/
pour
/
pour sélectionner la classification à
interdire.
•
Menu Language (Langue du menu) –
Permet de sélectionner la langue de
l’affichage du menu d’écran. Les options
sont English (anglais), French (français)
et Spanish (espagnol).
Les classifications du Canada francophones
sont les suivantes :
Classification Description
•
•
H Position – Permet de régler la position
E
Non classifié
horizontale du menu OSD.
V-Position – Permet de régler les
paramètres de la position verticale du
menu OSD.
G
Enfants
8ans+
13ans+
16ans+
18ans+
Enfants de 8 ans et plus
Enfants de 13 ans et plus
Enfants de 16 ans et plus
Programmation pour adultes
•
•
OSD Time Out (Durée d'affichage de
l’OSD) – Règle la durée d'affichage du
menu OSD.
Transparency (Transparence) – Permet
de régler la transparence du menu OSD.
6 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
4 Appuyer sur TV MENU (Menu TV) une ou
plusieurs fois pour fermer le menu.
Remarque
•
•
Si System Lock (Verrouillage système) n’est
pas réglé sur On (Activé), les paramètres de
configuration ne fonctionneront pas.
Réglage des paramètres du PC
Pour régler les paramètres du mode PC :
Il est possible de voir des émissions interdites
en saisissant le mot de passe. Cela a pour effet
de désactiver temporairement le verrouillage
parental. Pour réactiver le verrouillage parental,
mettre le téléviseur hors tension. Quand le
téléviseur est de nouveau mis sous tension, les
paramètres du verrouillage parental sont
réactivés.
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
en surbrillance l’icône GEOMETRY
(Géométrie). Le menu GEOMETRY s’affiche.
Réglage des paramètres OSD
G E O M E T RY
A u t o A d j u s t
Pour ajuster les paramètres OSD :
H - P o s i t i o n
V- P o s i t i o n
C l o c k
5 0
3 9
5 1
1 6
1 Appuyer sur TV MENU (Menu TV) de la
télécommande, puis sur
/
pour mettre
P h a s e
en surbrillance l’icône OSD (Menus d’écran).
Le menu OSD (Menus d’écran) s’affiche.
Mode PC
MENU
E x i t
S e l
A d j
2 Appuyer sur
/
OU SUR ENTER (Entrée)
O S D
pour accéder au menu GEOMETRY
(Géométrie).
M e n u L a n g u a g e
H - P o s i t i o n
E n g l i s h
1 5 S e c .
5 0
5 0
V- P o s i t i o n
3 Appuyer sur
paramètres suivants, puis sur
changer le paramètre. Sélections possibles :
/
pour sélectionner un des
O S D T i m e O u t
Tr a n s p a r e n c y
/
pour
4
•
Auto Adjust (Réglage automatique) –
Appuyer sur ou sur ENTER pour
activer le réglage automatique.
H-Position (Position horizontale)
V-Position (Position verticale)
Horloge
/
MENU
S e l
A d j
E x i t
•
•
•
•
Mode TV
Phase
4 Appuyer sur TV MENU (Menu TV) une ou
O S D
plusieurs fois pour fermer le menu.
M e n u L a n g u a g e
E n g l i s h
1 5 S e c .
5 0
5 0
H - P o s i t i o n
Tableau du signal d’entrée du PC
V- P o s i t i o n
O S D T i m e O u t
Tr a n s p a r e n c y
Le tableau ci-après indique les résolutions
d’écran suggérées.
4
Fréquence
(Hz)
Format
Résolution
MENU
S e l
A d j
E x i t
VGA
640 × 480
720 × 400
60
70
2 Appuyer sur
/
ou sur ENTER (Entrée)
pour accéder au menu OSD.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 52 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
2 Appuyer sur INPUT (Entrée), puis sur
pour sélectionner DVD, puis sur ENTER
/
Fréquence
Format
Résolution
(Hz)
(Entrée). Il est aussi possible d’appuyer sur
DVD de la télécommande pour sélectionner
le mode DVD. L'écran de démarrage du DVD
s'affiche à l'écran.
SVGA
800 × 600
800 × 600
60
72
XGA
1024 × 768
60
WXGA
1280 × 720
1360 × 768
60
60
Remarque
La lecture démarre automatiquement si un DVD
est déjà inséré dans le lecteur.
Si l'ordinateur utilise une résolution vidéo autre
que celles indiquées ci-dessus, l’appareil affiche
le message « Unsupported » (Non compatible).
Si ce message s’affiche, régler l’affichage PC
sur l’une des résolutions ci-dessus.
3 Insérer un DVD dans le logement des
disques, avec l’étiquette tournée vers l'avant.
Le lecteur DVD identifie le DVD et affiche le
menu d'introduction.
4 Appuyer sur
/
et
/
pour mettre en
Modification de la résolution vidéo de
l'ordinateur
surbrillance un élément de menu, puis sur
ENTER.
L'exemple suivant montre les paramètres de
Windows XP. Même avec un système
d'exploitation Windows différent, les méthodes
de configuration de base sont similaires. Pour
modifier la résolution vidéo sur un ordinateur
Macintosh, se reporter à la documentation du
Macintosh.
5 Pendant la lecture :
•
Appuyer sur
(Lecture/Pause) pour
arrêter momentanément la lecture.
Appuyer de nouveau sur cette touche
pour reprendre la lecture.
•
•
Appuyer sur
retour rapide et sur
une avance rapide.
Appuyer sur
chapitre précédent ou sur
passer au chapitre suivant.
pour effectuer un
pour effectuer
Pour modifier la résolution vidéo de
l'ordinateur :
pour revenir au
1 Cliquer sur Start (Démarrer), Control Panel
pour
(Panneau de configuration), puis
double-cliquer sur Display (Affichage). La
boîte de dialogue Display Properties
(Propriétés d'affichage) s’ouvre.
•
•
La touche
permet d’effectuer une
lecture au ralenti (vers l’avant ou vers
l’arrière).
Pour arrêter complètement la lecture d'un
DVD, appuyer deux fois sur
(Arrêt).
STOP
6 Appuyer sur
pour retirer le DVD.
Lecture d'un CD audio
Pour reproduire un CD audio :
1 Appuyer sur POWER
(Marche/Arrêt) pour
mettre le téléviseur en marche.
2 Appuyer sur INPUT (Entrée), puis sur
pour sélectionner DVD, puis sur ENTER
/
(Entrée). Il est aussi possible d’appuyer sur
DVD de la télécommande pour sélectionner
le mode DVD. L'écran de démarrage du DVD
s'affiche à l'écran.
2 Cliquer sur l’onglet Settings (Paramètres).
3 Régler la résolution de l'écran sur une
résolution compatible (la résolution idéale
pour ce téléviseur est de 1360 × 768).
Remarque
La lecture démarre automatiquement si un CD est
déjà inséré dans le lecteur.
4 Cliquer sur OK, puis sur Yes (Oui) pour
enregistrer les modifications.
3 Insérer un CD dans la fente d'insertion des
disques, avec l’étiquette sur le dessus.
Utilisation du lecteur DVD
Lecture d’un DVD
4 Appuyer sur
(Lecture/Pause). Les
pistes sont lues par ordre numérique.
5 Appuyer sur
STOP (Arrêt) pour arrêter la
Pour reproduire un DVD :
lecture ou sur
(Lecture/Pause) pour
1 Appuyer sur POWER
(Marche/Arrêt) pour
l’arrêter momentanément.
mettre le téléviseur en marche.
6 Appuyer sur
pour retirer le CD.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 53 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Pour reproduire une piste particulière :
Utilisation du menu d'un DVD
•
Après l'insertion d'un CD, et quand l'appareil
a terminé d’identifier le disque, appuyer sur
les touches numériques pour saisir le
numéro de la piste souhaitée, puis appuyer
sur ENTER (Entrée).
Si un DVD comporte un menu, il est possible
d'utiliser ce menu pour sélectionner des
paramètres tels que la langue des sous-titres ou
la langue audio.
Pour utiliser un menu de DVD :
1 Pendant la lecture du DVD, appuyer sur DVD
MENU (Menu DVD).
2 Appuyer sur
/
ou sur
/
pour
sélectionner un paramètre, puis appuyer sur
ENTER (Entrée).
Lecture en boucle d'un DVD
Si un autre écran s'ouvre, répéter les étapes
2 et 3 pour sélectionner un paramètre.
Il est possible de répéter des chapitres, des
titres ou la totalité d'un DVD.
Pour effectuer une lecture en boucle :
Recherche d'un titre ou d'un chapitre d'un
DVD
1 Pendant la lecture du DVD, appuyer sur
REPEAT (Répétition) pour sélectionner la
partie à répéter. Sélections possibles :
Pour rechercher un titre ou un chapitre d'un
DVD :
1 Après l’insertion d’un DVD, appuyer sur
T.SEARCH (Recherche par la durée). La
boîte de dialogue suivante s’ouvre.
•
CHAPTER [Chapitre] (répète le chapitre
en cours)
•
•
TITLE [Titre] (répète le titre en cours)
ALL [Tout] (répète tout le DVD)
2 Pour arrêter la lecture en boucle, effectuer
l’une des opérations suivantes :
•
Appuyer sur REPEAT jusqu'à ce que ALL
(Tout) disparaisse de l'écran.
•
•
Appuyer deux fois sur
Éjecter le DVD.
STOP (Arrêt).
2 Appuyer sur
/
pour sélectionner un titre,
puis appuyer sur la touche numérique
correspondant au titre, puis sur ENTER
(Entrée).
Lecture en boucle d'un CD
Il est possible de répéter des pistes ou la totalité
d'un CD en effectuant une lecture en boucle.
Pour effectuer une lecture en boucle :
1 Pendant la lecture du CD, appuyer sur
REPEAT (Répétition) pour sélectionner les
morceaux à répéter. Sélections possibles :
3 Répéter les étapes 2 et 3 pour sélectionner
•
•
ALL [Tout] (répète tout le CD)
TRACK [Piste] (répète la piste en cours)
un numéro de chapitre.
Recherche d'un instant spécifié sur un
DVD
2 Pour arrêter la lecture en boucle, effectuer
l’une des opérations suivantes :
•
Appuyer sur REPEAT jusqu'à ce que ALL
Pour rechercher un instant spécifié sur un
DVD :
1 Après l’insertion d’un DVD, appuyer une ou
plusieurs fois sur T.SEARCH jusqu’à ce
qu’une des boîtes de dialogue suivantes
s’ouvre.
(Tout) disparaisse de l'écran.
•
•
Appuyer deux fois sur
Éjecter le CD.
STOP (Arrêt).
Utilisation du menu titre d'un DVD
Si un DVD comporte au moins deux titres et que
le DVD a un menu de titres, il est possible
d'utiliser ce menu pour sélectionner un titre à
lire.
Pour utiliser le menu titre d'un DVD :
1 Pendant la lecture du DVD, appuyer sur DVD
TITLE (Titre DVD).
2 Appuyer sur
/
ou sur
/
pour
sélectionner un titre.
3 Appuyer sur ENTER (Entrée). La lecture
démarre avec le titre sélectionné.
2 Utiliser les touches numériques pour saisir la
durée à sauter sur le DVD, puis appuyer sur
ENTER.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 54 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
2 Si plusieurs langues audio sont disponibles,
appuyer sur AUDIO pour parcourir les
langues disponibles.
Recherche d'une piste spécifique sur un
CD
Pour rechercher une piste spécifique :
1 Après l’insertion d’un CD, appuyer une ou
plusieurs fois sur T.SEARCH jusqu’à ce que
la boîte de dialogue suivante s’ouvre.
2 Appuyer sur la touche numérique
correspondant à la piste souhaitée, puis sur
ENTER.
Recherche d'un instant spécifique sur la
piste d’un CD
Remarque
Cette fonction n’est disponible que si le DVD a été
créé avec plusieurs langues audio. Lors de la
sélection d’une langue audio, le réglage de langue
audio n’est valable que temporairement.
Pour rechercher un instant spécifié sur une
piste d'un CD :
1 Après l’insertion d’un CD, appuyer une ou
plusieurs fois sur T.SEARCH jusqu’à ce
qu’une des boîtes de dialogue suivantes
s’ouvre.
Conseil
Il est également possible de modifier la langue
audio depuis le menu principal du lecteur DVD ou
au moyen des réglages audio du DVD lui-même.
Activation ou désactivation des sous-titres
du DVD
Pour activer et désactiver les sous-titres :
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). L'icône General
Setup (Configuration générale)
en surbrillance.
est mis
2 Utiliser les touches numériques pour saisir la
durée à sauter sur la piste, puis appuyer sur
ENTER.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
Modification de la langue audio du DVD
SCREEN SAVER ON
Si un DVD est doté de plusieurs langues audio, il
est possible de changer de langue.
LAST MEMORY ON
Pour changer de langue audio :
1 Appuyer sur AUDIO. Le menu d’écran (OSD)
GOTO GENERAL SETUP PAGE
affiche la langue audio en cours.
2 Appuyer sur ENTER (Entrée). La page de
configuration générale (General Setup Page)
s’affiche.
-- GENERAL SETUP PAGE --
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
CAPTIONS
OFF
ON
OFF
ON
SCREEN SAVER ON
LAST MEMORY ON
OFF
ON
OFF
54
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 55 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
3 Appuyer sur
/
pour mettre en
2 Appuyer sur ENTER (Entrée). La page de
configuration générale (General Setup Page)
s’affiche.
surbrillance CAPTIONS (Sous-titres), puis
appuyer sur ENTER.
4 Appuyer sur
/
pour mettre en
surbrillance ON (Activé) ou OFF (Désactivé),
puis appuyer sur ENTER.
-- GENERAL SETUP PAGE --
5 Appuyer une ou plusieurs fois sur
pour
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
revenir au menu précédent.
6 Pour quitter le menu, appuyer sur
pour
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
CAPTIONS
OFF
ON
OFF
ON
Sélection de la langue des sous-titres
SCREEN SAVER ON
LAST MEMORY ON
OFF
ON
Si un DVD a des sous-titres, il est possible de
changer la langue de ces sous-titres.
OFF
Pour changer la langue des sous-titres pour
le DVD en cours de lecture :
1 Appuyer une ou plusieurs fois sur SUBTITLE
(Sous-titres) pour parcourir les langues de
sous-titres disponibles.
3 Appuyer sur
/
pour sélectionner TV
DISPLAY (Affichage TV), puis sur ENTER.
4 Appuyer sur
/
pour mettre en
surbrillance le type d'affichage souhaité, puis
appuyer sur ENTER.
•
NORMAL/PS
2 Pour désactiver le sous-titrage, appuyer sur
SUBTITLE jusqu'à l’affichage de TURN OFF
SUBTITLE (Sous-titres désactivés).
Remarque
Le changement de langue de sous-titrage au
moyen de cette méthode ne s’applique qu’au DVD
en cours de lecture. Lors du retrait du DVD ou de
la mise hors tension de l’appareil, la langue des
sous-titres revient à celle définie dans le menu
principal du lecteur DVD.
L’écran affiche les images panoramiques,
mais elles sont tronquées automatiquement
sur les côtés.
•
NORMAL/LB
Conseil
Il est également possible de modifier la langue
des sous-titres depuis le menu principal du lecteur
DVD ou au moyen des réglages de sous-titrage du
DVD lui-même.
Modification du mode d'affichage DVD
L’écran permet l’affichage d’images
panoramiques, avec une bande noire en haut
et en bas de l’écran.
Pour modifier le mode d’affichage du
téléviseur :
1 Avec le téléviseur en mode DVD, appuyer sur
•
PANORAMIQUE
SETUP (Configuration). L'icône General
Setup (Configuration générale)
est mis
en surbrillance.
-- GENERAL SETUP PAGE --
Les images panoramiques remplissent la
totalité de l'écran.
TV DISPLAY
CAPTIONS
WIDE
OFF
5 Appuyer une ou plusieurs fois sur
pour
revenir au menu précédent.
SCREEN SAVER ON
6 Pour quitter le menu, appuyer sur
pour
LAST MEMORY ON
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
GOTO GENERAL SETUP PAGE
55
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 56 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
Activation ou désactivation de
l’économiseur d’écran.
Utilisation de la dernière position
mémorisée du DVD
L’appareil peut mémoriser le point d’arrêt de la
lecture d’un DVD quand l’appareil est mis hors
tension. Quand l’appareil est mis sous tension et
que la lecture du DVD est démarrée, celle-ci
reprend au point d’arrêt au moment de l’arrêt de
l’appareil.
Pour activer et désactiver l'économiseur
d'écran :
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). L'icône General
Setup (Configuration générale)
en surbrillance.
est mis
Pour utiliser la dernière position mémorisée :
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). L'icône General
-- GENERAL SETUP PAGE --
Setup (Configuration générale)
est mis
en surbrillance.
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
-- GENERAL SETUP PAGE --
LAST MEMORY ON
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
GOTO GENERAL SETUP PAGE
LAST MEMORY ON
2 Appuyer sur ENTER (Entrée). La page de
configuration générale (General Setup Page)
s’affiche.
GOTO GENERAL SETUP PAGE
2 Appuyer sur ENTER (Entrée). La page de
configuration générale (General Setup Page)
s’affiche.
-- GENERAL SETUP PAGE --
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
-- GENERAL SETUP PAGE --
CAPTIONS
OFF
ON
NORMAL/PS
NORMAL/LB
WIDE
TV DISPLAY
WIDE
OFF
ON
SCREEN SAVER ON
LAST MEMORY ON
OFF
ON
OFF
CAPTIONS
OFF
ON
OFF
ON
SCREEN SAVER ON
LAST MEMORY ON
OFF
ON
OFF
3 Appuyer sur
/
pour mettre en
surbrillance SCREEN SAVER (Économiseur
d'écran), puis appuyer sur ENTER.
4 Appuyer sur
/
pour mettre en
surbrillance ON (Activé) ou OFF (Désactivé),
puis appuyer sur ENTER.
3 Appuyer sur
/
pour mettre en
surbrillance LAST MEMORY (Dernière
position mémorisée), puis appuyer sur
ENTER.
5 Appuyer une ou plusieurs fois sur
pour
revenir au menu précédent.
4 Appuyer sur
/
pour mettre en
6 Pour quitter le menu, appuyer sur
pour
surbrillance ON (Activé) ou OFF (Désactivé),
puis appuyer sur ENTER.
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
5 Appuyer une ou plusieurs fois sur
pour
revenir au menu précédent.
6 Pour quitter le menu, appuyer sur
pour
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 57 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
7 Pour quitter le menu, appuyer sur
pour
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
Configuration de la sortie des
haut-parleurs du lecteur DVD
Pour configurer la sortie des haut-parleurs :
Configuration de la fonction Dolby Digital
du lecteur DVD
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). Le menu de
configuration (Setup Menu) s’affiche.
Pour configurer Dolby Digital :
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). Le menu de
configuration (Setup Menu) s’affiche.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
-- GENERAL SETUP PAGE --
LAST MEMORY ON
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
GOTO GENERAL SETUP PAGE
LAST MEMORY ON
2 Appuyer sur
/
pour sélectionner l'icône
Audio
, puis appuyer sur ENTER
GOTO GENERAL SETUP PAGE
(Entrée). La page de Configuration audio
(Audio Setup Page ) s’affiche.
2 Appuyer sur
/
pour sélectionner l'icône
Audio, puis appuyer sur ENTER (Entrée). La
page de Configuration audio (Audio Setup
Page ) s’affiche.
3 Appuyer sur
/
pour mettre en
surbrillance Speaker Setup (Configuration
des haut-parleurs), puis appuyer sur ENTER.
La page de configuration des haut-parleurs
(Speaker Setup Page) s’affiche.
3 Appuyer sur
/
pour mettre en
surbrillance DOLBY DIGITAL SETUP
(Configuration Dolby Digital), puis appuyer
sur ENTER. La page de configuration de
Dolby Digital (Dolby Digital Setup Page)
s’affiche.
4 Appuyer sur
/
pour mettre en
surbrillance DOWNMIX (Réduction du
mixage), puis appuyer sur ENTER.
5 Appuyer sur
/
pour mettre en
surbrillance LT/RT (Gauche/Droit) ou
STEREO (Stéréo), puis appuyer sur ENTER.
•
LT/RT (Gauche/Droit) – Sur un disque
enregistré avec une piste sonore
multicanal, le signal de sortie est intégré
4 Appuyer sur
/
pour mettre en
dans le canal gauche et le canal droit.
surbrillance DUAL MONO (Mono à deux
canaux) ou D.R.C (Commande de portée
dynamique), puis appuyer sur ENTER.
•
STEREO (Stéréo) – Sur un disque
enregistré avec une piste sonore
multicanal, le signal de sortie est intégré
au son stéréo.
•
DUAL MONO (Mono à deux canaux) –
Mode de sortie des signaux gauche et
droit de la sortie audio sélectionnée. Si
MIXED MONO (Mono mixte) est le
paramètre choisi, seuls les DVD en mode
5.1 canaux fonctionnent.
6 Appuyer une ou plusieurs fois sur
pour
revenir au menu précédent.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 58 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
•
D.R.C (Commande de portée dynamique)
– Permet de régler le taux de
compression linéaire pour obtenir des
résultats de compression différents pour
les signaux.
5 Appuyer sur
/
pour sélectionner l'un des
modèles d'égalisation prédéfinis ci-après,
puis appuyer sur ENTER :
•
•
•
•
•
•
•
•
NONE (Aucune)
ROCK
POP
LIVE (En direct)
DANCE (Danse)
TECHNO
CLASSIC (Musique classique)
SOFT (Doux)
5 Appuyer sur
/
pour mettre en
surbrillance STEREO, LEFT MONO, RIGHT
MONO, or MIXED MONO (Stéréo, Mono
gauche, Mono droit ou Mono mixte), puis
appuyer sur ENTER.
6 Appuyer sur
/
pour changer le
paramètre, puis sur ENTER.
7 Appuyer une ou plusieurs fois sur
pour
pour
6 Appuyer une ou plusieurs fois sur
pour
pour
revenir au menu précédent.
revenir au menu précédent.
8 Pour quitter le menu, appuyer sur
7 Pour quitter le menu, appuyer sur
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
Utilisation de l’égalisateur du lecteur DVD
Configuration du son 3D du lecteur DVD
Il est possible de sélectionner des modèles
d’égalisation graphique prédéfinis fondés sur le
type de musique retenu. Il est également
possible d'ajuster les réglages de l'égalisateur.
Pour configurer le son 3D :
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). Le menu de
configuration (Setup Menu) s’affiche.
Pour utiliser l'égalisateur :
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). Le menu de
configuration (Setup Menu) s’affiche.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
-- GENERAL SETUP PAGE --
LAST MEMORY ON
TV DISPLAY
CAPTIONS
WIDE
OFF
GOTO GENERAL SETUP PAGE
SCREEN SAVER ON
LAST MEMORY ON
2 Appuyer sur
/
pour sélectionner l'icône
Audio, puis appuyer sur ENTER (Entrée). La
page de Configuration audio (Audio Setup
Page ) s’affiche.
GOTO GENERAL SETUP PAGE
2 Appuyer sur
/
pour sélectionner l'icône
Audio , puis appuyer sur ENTER (Entrée).
La page de Configuration audio (Audio Setup
Page ) s’affiche.
3 Appuyer sur
/
pour mettre en
surbrillance CHANNEL EQUALIZER
(Égalisateur de canal), puis appuyer sur
ENTER. La page Égalisateur de canal
(Channel Equalizer Page) s’affiche.
4 Appuyer sur
/
pour mettre en
surbrillance EQ TYPE (Type d'égalisateur),
puis appuyer sur ENTER.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 59 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
3 Appuyer sur
/
pour mettre en
2 Appuyer sur
Video (Vidéo)
/
pour sélectionner l'icône
surbrillance 3D PROCESSING (Traitement
3D), puis appuyer sur ENTER. La page du
Traitement 3D (3D Processing Page)
s’affiche.
, puis appuyer sur ENTER
(Entrée). La page de Configuration vidéo
(Video Setup Page ) s’affiche.
- - VIDEO SETUP PAGE - -
SHARPNESS
MID
HIGH
MEDIUM
LOW
BRIGHTNESS
00
00
CONTRAST
BLACK LEVEL
NORMAL
LIGHTER
3 Appuyer sur
/
pour mettre en
surbrillance un des paramètres suivants, puis
appuyer sur ENTER pour le sélectionner :
•
SHARPNESS (Netteté) – Règle le niveau
de netteté. Appuyer sur pour mettre
en surbrillance HIGH (Élevé), MEDIUM
(Moyen) ou LOW (Faible), puis appuyer
sur ENTER pour sélectionner.
4 Appuyer sur
/
pour sélectionner l’une
/
des options suivantes, puis appuyer sur
ENTER :
•
V SURR (Ambiophonie virtuelle) – Active
•
•
•
BRIGHTNESS (Luminosité) – Permet de
et désactive l'ambiophonie virtuelle.
régler la luminosité de l’image. Appuyer
•
REVERB MODE (Mode
Réverbération) – Sélectionne un mode de
réverbération.
sur
/
pour régler le niveau, puis
appuyer sur ENTER pour confirmer.
CONTRAST (Contraste) – Permet de
régler le niveau de contraste. Appuyer sur
5 Appuyer sur
/
pour sélectionner le mode
souhaité parmi les options, puis appuyer sur
/
pour régler le niveau, puis appuyer
ENTER.
sur ENTER pour confirmer.
6 Appuyer une ou plusieurs fois sur
pour
pour
BLACK LEVEL (Niveau des noirs) –
Permet de régler le niveau des noirs.
revenir au menu précédent.
7 Pour quitter le menu, appuyer sur
Appuyer sur
/
pour mettre en
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
surbrillance NORMAL ou LIGHTER
(Atténué), puis appuyer sur ENTER pour
sélectionner.
Réglage des options vidéo du DVD
4 Appuyer une ou plusieurs fois sur
pour
Pour configurer les options vidéo :
revenir au menu précédent.
1 Avec le téléviseur en mode DVD, appuyer sur
5 Pour quitter le menu, appuyer sur
pour
SETUP (Configuration). Le menu de
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
configuration (Setup Menu) s’affiche.
Configuration du mot de passe du
contrôle parental d’un DVD
-- GENERAL SETUP PAGE --
Pour configurer ou modifier un mot de
passe :
TV DISPLAY
CAPTIONS
WIDE
OFF
1 Avec le téléviseur en mode DVD, appuyer sur
SCREEN SAVER ON
SETUP (Configuration). Le menu de
LAST MEMORY ON
configuration (Setup Menu) s’affiche.
GOTO GENERAL SETUP PAGE
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
WIDE
OFF
SCREEN SAVER ON
LAST MEMORY ON
GOTO GENERAL SETUP PAGE
59
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 60 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
2 Appuyer sur
/
pour sélectionner l'icône
Modification des préférences pour les DVD
Password Setup (Configuration du mot de
passe) , puis appuyer sur ENTER
Les préférences peuvent seulement être
modifiées lorsque le lecteur est en mode STOP
(Arrêt) et que le mode PW (Mot de passe) est
réglé sur OFF (Désactivé) à la page de
configuration du mot de passe (Password Setup
page).
(Entrée). La page de configuration du mot de
passe (Password Setup Page) s’affiche.
Pour modifier les préférences :
1 Avec le téléviseur en mode DVD, appuyer sur
SETUP (Configuration). Le menu de
configuration (Setup Menu) s’affiche.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER ON
WIDE
OFF
3 Appuyer sur
/
pour sélectionner l’une
des options suivantes, puis appuyer sur
LAST MEMORY ON
ENTER :
•
PW MODE (Mode mot de passe) –
Sélectionner ON (Activé) pour activer la
fonctionnalité du mot de passe.
GOTO GENERAL SETUP PAGE
PARENTAL (Contrôle parental) est en
grisé et ne peut pas être sélectionné.
Sélectionner OFF (Désactivé) pour
désactiver la fonctionnalité du mot de
passe. PARENTAL peut être sélectionné.
2 Appuyer sur
/
pour sélectionner l’icône
Preferences (Préférences)
puis appuyer
sur
ENTER (Entrée). La page des
préférences (Preferences Page ) s’affiche.
•
•
PASSWORD CHANGE (Modification du
mot de passe) – Permet de modifier le
mot de passe. Le mot de passe préréglé
en usine est 99999.
PARENTAL (Contrôle parental) – Si la
fonctionnalité du verrouillage parental est
activée, cela permet d’autoriser ou
d’interdire les classifications du DVD. Il
n'est pas possible de lire des DVD dont la
classification est supérieure au critère
sélectionné.
-- PREFERENCE PAGE --
AUDIO
ENG
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
SUBTITLE OFF ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
4 Appuyer sur
/
pour sélectionner la
fonction souhaitée parmi les options, puis
appuyer sur ENTER.
5 Appuyer une ou plusieurs fois sur
pour
DISC MENU ENG ENGLISH
FRENCH
revenir au menu précédent.
6 Pour quitter le menu, appuyer sur
pour
SPANISH
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
CHINESE
JAPANESE
DEFAULT
RESET
3 Appuyer sur
/
pour sélectionner l’une
des options suivantes, puis appuyer sur
ENTER :
•
AUDIO – Changement de la langue audio
du DVD. Si le DVD en cours de lecture
contient la langue sélectionnée, cette
langue sera utilisée pour l'audio. Si la
langue sélectionnée n’est pas disponible
sur le DVD, la langue audio originale est
utilisée.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 61 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
•
SUBTITLE (Sous-titres) – Modifie la
langue des sous-titres du DVD. Si la
langue sélectionnée est disponible sur le
DVD, les sous-titres sont affichés dans
cette langue. Si la langue sélectionnée
n’est pas disponible sur le DVD, les
sous-titres d’origine sont utilisés.
Nettoyage des disques
Des empreintes digitales et de la poussière sur
un disque sont sources d’image médiocre et de
son déformé. Nettoyer le disque avec un chiffon
propre avant de l’utiliser. Essuyer le disque en
partant du centre vers l’extérieur.
•
DISC MENU (Menu du disque) – Permet
de sélectionner la langue du menu du
disque. Si la langue sélectionnée est
disponible sur le DVD, le menu du disque
est affiché dans cette langue. Si la langue
sélectionnée n’est pas disponible sur le
DVD, le menu du disque est affiché dans
la langue d’origine.
•
DEFAULT (Par défaut) – Réinitialise le
Ne pas utiliser des solvants puissants comme
l’alcool, le benzène, les diluants, les nettoyants
disponibles dans le commerce ou les
vaporisateurs antistatiques destinés aux anciens
disques en vinyle.
lecteur DVD à ses paramètres par défaut.
4 Appuyer sur
/
pour sélectionner la
fonction souhaitée parmi les options, puis
appuyer sur ENTER.
5 Appuyer une ou plusieurs fois sur
pour
pour
Remarque
revenir au menu précédent.
Ne jamais utiliser cet appareil immédiatement
après l’avoir transféré d’un lieu froid à un lieu
tiède. Ne pas le faire fonctionner pendant deux ou
trois heures. L’utilisation immédiate de l’appareil
risque d’endommager les cassettes, les disques
ou les composants internes.
6 Pour quitter le menu, appuyer sur
mettre en surbrillance l’icône Exit (Quitter),
puis appuyer sur ENTER.
Entretien du téléviseur
Nettoyage du boîtier
Problèmes et solutions
TV
Essuyer le panneau avant et les autres surfaces
externes du téléviseur avec un chiffon doux
humecté d’eau tiède. Ne jamais utiliser un
solvant ou de l’alcool pour nettoyer le téléviseur.
Ne pas pulvériser d’insecticides près de
l’appareil. Ces produits chimiques peuvent
endommager et décolorer les surfaces
exposées.
Problème
Solution
Absence d’image
et de son
•
Vérifier les connexions de tous les
câbles.
•
Vérifier que le téléviseur est allumé.
L’image est
correcte, mais
pas de son
Vérifier les réglages du volume sonore et de la
sourdine.
Soins et manipulation des disques
Manipulation des disques
Le son est
•
•
Vérifier et ajuster le réglage de la
couleur.
correct, mais pas
de couleur
Ne pas toucher le côté lecture du disque. Saisir
le disque par les bords afin de ne pas maculer la
surface du disque d'empreintes digitales. Ne
jamais coller du papier ou du ruban sur le
disque.
Vérifier les caractéristiques de couleur
de l'émission; il est possible que ce soit
un film en noir et blanc.
L’écran affiche
Vérifier que l’antenne est installée correctement.
plusieurs images Sinon, orienter l'antenne vers la station de
superposées
télévision.
L'image est
« neigeuse »
•
Vérifier l'antenne et sa connexion. En cas
de problèmes, y remédier. Si toutes les
connexions sont bonnes, il est possible
que l'antenne ou le câble soit
défectueux.
•
Vérifier si la circulation automobile ou
des enseignes au néon perturbent
l'image.
Rangement des disques
Après lecture, ranger le disque dans son boîtier.
Ne pas exposer le disque à la lumière directe du
soleil ou d’autres sources de chaleur et ne
jamais le laisser dans une voiture garée en plein
soleil.
Bandes
traversant
l’image
Veiller à éliminer toute interférence d'autres
appareils électroniques, tels que postes de radio
et téléviseurs, et éloigner de l’appareil tous les
dispositifs magnétiques ou électroniques.
Son SAP ou
Une distance élevée par rapport à la station ou
stéréo défectueux des interférences radio peuvent générer une
mauvaise réception sonore. Si c'est le cas,
passer en mode Mono.
Latélécommande Enlever les obstacles éventuels entre la
ne fonctionne
pas.
télécommande et le lecteur. Pointer la
télécommande en direction du capteur
infrarouge de l’appareil. Installer des piles
neuves.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 62 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
TV
Standard TV
NTSC
Problème
Solution
Système de
syntonisation
Système de
syntonisation
électronique
« Non
Vérifier la résolution et la fréquence de
l'ordinateur, puis ajuster à la résolution optimale
pour ce téléviseur : 1360 × 768 à 60 Hz.
compatible »
s'affiche à
l'écran.
Gamme de fréquence
Stéréo
VHF/UHF
BTSC
Le message « No Vérifier que le câble est bien connecté à
Sync » (Pas de
synchronisation)
s’affiche à l’écran
l'ordinateur et au téléviseur.
Câblodistribution
Entrée
125 canaux
Marche/Arrêt
100 à 240 V CA,
50/60 Hz
L’image n’est pas Régler la commande de phase.
nette
Consommation (max.) 150 W
L’image n’est pas Régler l’image horizontale.
centrée
Son
Sortie
6 W × 2
Bornes
Entrée A/V
Vidéo, S-Vidéo, Audio
G/D
Présence de
La présence de quelques points lumineux ou
quelques points sombres sur un écran ACL n’est pas anormale.
Composantes
Entrée PC
Y, Pb (Cb), Pr (Cr)
lumineux ou
sombres sur
l’image.
Cela n’affecte pas le fonctionnement du
téléviseur.
Entrée RBG D-SUB à 15
broches
HDMI
Compatible HDMI
(connecteur de type A)
DVD
Entrée antenne
Type F
NTSC
Problème
Solution
Lecteur DVD
Standard de signal
Disques compatibles
Pas de son.
•
•
Vérifier que l’appareil ou l'amplificateur
fonctionnent correctement.
Vérifier que l'amplificateur est réglé pour
recevoir le signal de sortie du lecteur
DVD.
DVD : 12 cm
CD : 12 cm
Conditions de
fonctionnement
Température
Humidité
Pression
atmosphérique
5 à 35 °C
20 % à 80 % HR
86 à 106 kPa
Pas d’image
•
•
Vérifier que le téléviseur fonctionne
correctement.
Vérifier si le standard couleur est réglé
correctement.
Avis juridiques
Mauvaise qualité
du son
•
•
Vérifier que le mode de sortie audio est
réglé correctement.
Vérifier que la connexion audio entre le
téléviseur et l’amplificateur (le cas
échéant) est bonne.
Déclaration de Macrovision
Ce produit incorpore une technologie de protection de droits
d’auteurs protégée par des revendications de procédé de
certains brevets américains et d’autres droits de propriété
intellectuelle de Macrovision Corporation et d’autres
propriétaires de droits. L’utilisation de cette technologie de
protection des droits d’auteur doit être autorisée par la
société Macrovision et doit se limiter à des fins de
divertissement privé à moins d’une autorisation préalable et
explicite de Macrovision Corporation. La rétro-ingénierie ou
le démontage sont interdits.
Impossible de lire
le disque
•
Vérifier que le disque est inséré avec
l’étiquette tournée vers l'avant.
Nettoyer le disque.
De l'humidité s'est condensée dans le
lecteur. Retirer le disque et laisser le
lecteur sous tension pendant environ
une heure.
•
•
Droits d’auteurs
Le lecteur ne
fonctionne pas
normalement
Débrancher le cordon d'alimentation, puis le
rebrancher.
© 2008 Insignia. Insignia et le logo Insignia sont des
marques de commerce de Best Buy Enterprise Services,
Inc. Les autres noms de marques et de produits mentionnés
sont des marques de commerce ou des marques déposées
de leurs propriétaires respectifs. Les spécifications et
caractéristiques sont susceptibles d'être modifiées sans
préavis.
Latélécommande
ne fonctionne
pas.
•
•
•
Enlever les obstacles éventuels entre la
télécommande et le lecteur.
Pointer la télécommande en direction du
capteur infrarouge de l’appareil.
Installer des piles neuves.
Pour l’assistance technique, appeler le (877) 467-4289.
Spécifications
Écran ACL
Panneau
Panneau ACL TFT
panoramique de 26 po
Résolution
1366 × 768
Angle de vue
160°/150°
Taux de contraste
Luminosité (cd/m2)
Avec support
800:1 (Typique)
400 (Typique)
Dimensions
26,4 × 19,4 × 9,1 po
(670 × 494 × 230 mm)
Sans support
24,4 × 17,8 × 3,6 po
(670 × 452 × 98 mm)
Poids
26,57 lb (12,05 kg)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 63 Tuesday, April 1, 2008 1:25 PM
Ensemble lecteur DVD/TV ACL de 26 po Insignia NS-LTDVD26-09CA
•
•
la connexion à une source électrique dont la
tension est inadéquate;
toute réparation effectuée par quiconque autre
qu’un service de réparation agréé par Insignia pour
la réparation du Produit;
les produits vendus en l’état ou hors service;
les consommables tels que les fusibles ou les piles;
Garantie limitée d’un an
Insignia Products (« Insignia ») garantit au premier acheteur
de ce NS-LTDVD26-09CA neuf (« Produit »), qu’il est
exempt de vices de fabrication et de main-d’œuvre à
l’origine, pour une période d’un (1) an à partir de la date
d’achat du Produit (« Période de garantie »). Ce Produit doit
avoir été acheté chez un revendeur agréé des produits de la
marque Insignia et emballé avec cette déclaration de
garantie. Cette garantie ne couvre pas les Produits remis à
•
•
•
les produits dont le numéro de série usine a été
altéré ou enlevé.
neuf. Les conditions de la présente garantie s’appliquent à
tout Produit pour lequel Insignia est notifié pendant la
Période de garantie, d’un vice couvert par cette garantie qui
nécessite une réparation.
LA RÉPARATION OU LE REMPLACEMENT, TELS
QU’OFFERTS PAR LA PRÉSENTE GARANTIE,
CONSTITUENT LE SEUL RECOURS DE L’ACHETEUR.
INSIGNIA NE SAURAIT ÊTRE TENU POUR
RESPONSABLE DE DOMMAGES ACCESSOIRES OU
CONSÉCUTIFS, RÉSULTANT DE L’INEXÉCUTION D'UNE
GARANTIE EXPRESSE OU IMPLICITE SUR CE PRODUIT,
Y COMPRIS, SANS S’Y LIMITER, LA PERTE DE
DONNÉES, L’IMPOSSIBILITÉ D’UTILISER LE PRODUIT,
L’INTERRUPTION D’ACTIVITÉ OU LA PERTE DE
PROFITS. INSIGNIA PRODUCTS N’OCTROIE AUCUNE
AUTRE GARANTIE EXPRESSE RELATIVE À CE
PRODUIT; TOUTES LES GARANTIES EXPRESSES OU
IMPLICITES POUR CE PRODUIT, Y COMPRIS MAIS SANS
LIMITATION, TOUTE GARANTIE DE QUALITÉ
MARCHANDE, D'ADÉQUATION À UN BUT PARTICULIER,
SONT LIMITÉES À LA PÉRIODE DE GARANTIE
APPLICABLE TELLE QUE DÉCRITE CI-DESSUS ET
AUCUNE GARANTIE EXPRESSE OU IMPLICITE NE
S’APPLIQUERA APRÈS LA PÉRIODE DE GARANTIE.
CERTAINS ÉTATS ET PROVINCES NE RECONNAISSENT
PAS LES LIMITATIONS DE LA DURÉE DE VALIDITÉ DES
GARANTIES IMPLICITES. PAR CONSÉQUENT, LES
LIMITATIONS SUSMENTIONNÉES PEUVENT NE PAS
S'APPLIQUER À L’ACHETEUR ORIGINAL. LA PRÉSENTE
GARANTIE DONNE À L'ACHETEUR DES GARANTIES
JURIDIQUES SPÉCIFIQUES; IL PEUT AUSSI BÉNÉFICIER
D'AUTRES GARANTIES QUI VARIENT D'UN ÉTAT OU
D'UNE PROVINCE À L'AUTRE.
Quelle est la durée de la couverture?
La Période de garantie dure 1 an (365 jours) à compter de la
date d’achat de ce Produit. La date d’achat est imprimée sur
le reçu fourni avec le Produit.
Que couvre cette garantie?
Pendant la Période de garantie, si un vice de matériau ou de
main-d’œuvre d'origine est détecté sur le Produit par un
service de réparation agréé par Insignia ou le personnel du
magasin, Insignia (à sa seule discrétion) : (1) réparera le
Produit en utilisant des pièces détachées neuves ou remises
à neuf; ou (2) remplacera le Produit par un produit ou des
pièces neuves ou remises à neuf de qualité comparable. Les
produits et pièces remplacés au titre de cette garantie
deviennent la propriété d’Insignia et ne sont pas retournés à
l’acheteur. Si les Produits ou pièces nécessitent une
réparation après l’expiration de la Période de garantie,
l’acheteur devra payer tous les frais de main-d’œuvre et les
pièces. Cette garantie reste en vigueur tant que l’acheteur
reste propriétaire du Produit Insignia pendant la Période de
garantie. La garantie prend fin si le Produit est revendu ou
transféré d’une quelconque façon que ce soit à tout autre
propriétaire.
Pour contacter Insignia :
Comment obtenir une réparation sous garantie?
Pour le service à la clientèle, appeler le 1-877-467-4289
Si le Produit a été acheté chez un détaillant, le rapporter
accompagné du reçu original chez ce détaillant. Prendre
soin de remettre le Produit dans son emballage d’origine ou
dans un emballage qui procure la même qualité de
protection que celui d’origine. Si le Produit a été acheté en
ligne, l’expédier accompagné du reçu original à l’adresse
indiquée sur le site Web. Prendre soin de remettre le Produit
dans son emballage d’origine ou dans un emballage qui
procure la même qualité de protection que celui d’origine.
MC
INSIGNIA
est une marque de commerce de Best Buy
Enterprise Services, Inc.
Distribué par Best Buy Purchasing, LLC.
Insignia, 7601 Penn Avenue South, Richfield, Minnesota,
É.-U.
Pour obtenir le service de la garantie à domicile pour un
téléviseur avec écran de 25 po ou plus, appeler le
1-888-BESTBUY. L’assistance technique établira un
diagnostic et corrigera le problème au téléphone ou enverra
un technicien agréé par Insignia pour la réparation à
domicile.
Où cette garantie s’applique-t-elle?
Cette garantie ne s’applique qu’à l’acheteur original du
produit aux États-Unis et au Canada.
Ce qui n’est pas couvert par cette garantie limitée
La présente garantie ne couvre pas :
•
•
•
•
•
la formation du client;
l’installation;
les réglages de configuration;
les dommages esthétiques;
les dommages résultants de catastrophes
naturelles telles que la foudre;
•
•
•
•
•
•
les accidents;
une utilisation inadaptée;
une manipulation abusive;
la négligence;
une utilisation commerciale;
la modification de tout ou partie du Produit, y
compris l’antenne;
•
un écran plasma endommagé par les images fixes
(sans mouvement) qui restent affichées pendant de
longues périodes (rémanentes).
La présente garantie ne couvre pas non plus :
•
les dommages ayant pour origine une utilisation ou
une maintenance défectueuse;
63
Download from Www.Somanuals.com. All Manuals Search And Download.
08-1156 NS-LTDVD26-09CA - combined.fm Page 64 Tuesday, April 1, 2008 1:25 PM
TM
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2008 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
Distribué par Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2008 Best Buy Enterprise Services, Inc.
Tous droits réservés. INSIGNIA est une marque de Best Buy Enterprise Services, Inc. Déposée dans certains pays.
Tous les autres produits ou noms de marques sont des marques de commerce qui appartiennent à leurs propriétaires respectifs.
08-1156
Download from Www.Somanuals.com. All Manuals Search And Download.
|