User Guide
Digital AM/FM Clock Radio
NS-CLOPP2
Before using your new product, please read these instructions to prevent any damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital AM/FM Clock Radio
Important Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with themanufacture’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
product heat.
9 Do not defeat the safety purpose of the polarized or grounding
plug. A polarized plug has two blades with one wider than the
other. A grounding plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at the plugs, convenience receptacles, and at the
point where they exit from the apparatus.
11 Only use attachments/accessories provided by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug the apparatus during lightning storms or when unused
for long periods of time.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
NS-CLOPP2
14. Refer all servicing to qualified personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
15 Please keep the unit in a good ventilation environment. Do not
install this equipment in a confined space such as a bookcase
or similar unit.
16 WARNING: To reduce the risk of fire or electric shock, do not
expose apparatus to rain or moisture. The apparatus shall not
be exposed to dripping or apparatus.
17 WARNING: The main plug is used as a disconnect device. The
disconnect device shall remain readily operable.
18 WARNING: The batteries (battery pack or batteries installed)
shall not be exposed to excessive heat, such as sunshine, fire, or
the like.
19
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence
of non-insulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock.
WARNING: To reduce the risk of electric shock, do not remove
cover (or back) as The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance instructions in the
literature accompanying the appliance.
20
The apparatus is classified as a class II apparatus.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Digital AM/FM Clock Radio
Features
Package contents
Your clock radio includes the following items:
•
Clock radio
AC adapter
•
•
•
Batteries “AA” (2)
User Guide
LED display
#
Item
Description
1
PM indicator
When lit, indicates that the time shown is after
noon (PM).
2
TIME/ALARM/ In standby mode, digits show current time or
FREQUENCY
alarm time hours and minutes.
In radio mode, digits show the current radio
frequency.
display
3
Sleep timer When lit, indicates that the sleep timer is set.
indicator
4
Alarm 1
indicator
When lit, indicates that Alarm 1 is set.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
NS-CLOPP2
#
Item
Description
5
Alarm 2
indicator
When lit, indicates that Alarm 2 is set.
Top panel
#
Item
Description
1
(power)
button
Press to turn the radio on. Press again to turn the
radio to standby mode.
2
3
AM/FM
Press to toggle between AM and FM channels.
(RADIO) button
In radio mode, press to tune the radio to the
previous or next station.
When setting the clock, press to set the hours and
minutes backward or forward.
TUNE
/
When setting the alarm, use to select the alarm
time or to select the alarm mode or adjust the
alarm volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Digital AM/FM Clock Radio
#
Item
Description
4
When the alarm sounds, press to mute the alarm
for nine minutes.
Press to adjust the display brightness.
SNOOZE
(DIMMER)
button
5
In standby mode, press and hold to set the clock
time. When listening to the radio, press and hold
/MEM/
PRESET button to enter preset mode for presetting your desired
station or press to select a preset station.
6
(sleep)
button
Press to set the sleep timer. You can select 90
min, 60 min, 45 min, 30 min, 15 min, or OFF.
The time appears on the display.
7
8
VOL –/
In AM or FM mode, press to decrease the volume.
In alarm mode, press to set alarm 1.
button
VOL+/
button
In AM or FM mode, press to increase the volume.
In alarm mode, press to set alarm 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
NS-CLOPP2
Back panel
Item
Description
#
1
Battery
compartment
Insert two AA batteries into this compartment for
battery backup.
2
3
FM antenna
wire
Improves FM radio reception.
AC power
adapter
Plug the AC power adapter into a wall plug to
power your clock radio.
Set up your clock radio
Install the backup batteries
The clock radio uses a backup battery system to provide
continuous alarm operation and clock settings in the event of a
power failure. If the backup batteries have been installed and a
power failure occurs or the AC power adapter is accidentally
disconnected, the display will not remain lit, but the current time
and alarm time settings will be temporarily maintained.
Otherwise, you must reset the time and alarm settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Digital AM/FM Clock Radio
Make sure that the AC power adapter is plugged in, otherwise all
settings may be lost during battery installation.
1
Turn your clock radio around to the back, then open the
battery compartment cover located on the right side of
your clock radio.
2
3
Insert two "AA" batteries (not included) into the battery
compartment. Make sure that the + and – symbols on
the batteries align with the + and – symbols inside the
battery compartment.
Close the battery compartment.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
NS-CLOPP2
Caution
• Do not recharge, short, disassemble, or heat the
batteries, or dispose of in a fire.
• Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
• Remove the batteries when the charge is depleted or if
your clock radio will be left unplugged for an extended
period.
• If the batteries leak, clean the battery compartment with
a cloth. If chemicals touch your skin, wash immediately.
Battery chemicals can cause a rash.
• Do not use a mixture of old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), and
rechargable batteries.
• There is a danger of explosion if the batteries are
incorrectly replaced. Replace only with the same or
equivalent type.
When to Replace the Batteries
•
To check the condition of the batteries, unplug the AC
power adapter from the wall outlet and plug it in again
after a few minutes. If the displayed time is incorrect,
replace the batteries with new ones.
Connect the AC adapter
Make sure that the AC power outlet matches the AC adapter’s
power specifications (120 V ~ 60 Hz) prior to plugging in the
adapter.
•
Plug the AC power adapter into an AC power outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Digital AM/FM Clock Radio
Set the clock
1
Plug in the AC power adapter. The hour digits will blink
on the display.
PM indicator
Minutes digits
Hour digits
2
Press TUNE
/
repeatedly to set the correct hour,
then press
/MEM/PRESET to confirm the setting. The
minutes digits will blink.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
NS-CLOPP2
3
Press TUNE
/
repeatedly to set the correct
/MEM/PRESET to confirm the
minutes, then press
setting.
Note
• When you set the clock to a time after noon, the PM
indicator lights.
• 12:00 PM = Noon.
• To reset the clock in standby mode, press and hold
MEM/PRESET. The hour digits will blink on the
display.
/
Use your clock radio
Before using your clock radio, make sure the AC power adapter is
securely connected.
Turn your clock radio on and off
1
2
Press
(power). Your clock radio turns on.
Press SNOOZE/DIMMER to control the brightness of the
LED.
3
Press
(power) again to switch your clock radio to
standby mode.
Set and use the alarm
Note
• Your clock radio must be in standby mode (radio off) to
set the alarm.
• Your clock radio can be set to activate twice a day by
setting different times in ALARM 1 and ALARM 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Digital AM/FM Clock Radio
1
Press VOL –/
or VOL +/
(depending upon the
or indicator lights up.
alarm you want to set). The
PM indicator
Hour digits
Minutes digits
Alarm 1
indicator
Alarm 2
indicator
2
3
Press and hold VOL –/
(or VOL +/ ). The hour digits
will blink on the display.
Press TUNE
/
repeatedly to set the correct hour,
(or VOL +/ ) to confirm the
then press VOL –/
setting. The minutes digits will blink.
4
5
Press TUNE
/
repeatedly to set the correct
minutes, then press VOL –/
(or VOL +/ ) to confirm
the setting.
Press TUNE
/
to select the alarm sound source
(either buzzer or radio). The alarm mode name will be
shown on the display (Buzzer=Bu or Radio=rAd). Press
VOL –/
(or VOL +/ ) to confirm. If you select radio,
tune to the station you want and set the volume.
6
7
Press TUNE
/
to set the volume of the alarm. The
alarm will turn on at the time you have set and will turn
off automatically after 59 minutes.
Repeat these steps to set the alarm to a different time.
Note
In standby mode, press and hold VOL –/ (or VOL +/
to reset the alarm time.
)
Download from Www.Somanuals.com. All Manuals Search And Download.
13
NS-CLOPP2
Mute, turn off, or cancel the alarm
1
Press SNOOZE/DIMMER to mute the alarm for nine
minutes. The alarm can be muted as many times as you
want within 59 minutes of the preset alarm time.
2
3
Press any button except SNOOZE/DIMMER to turn the
alarm off for 24 hours.
To cancel the preset alarm, press VOL –/
(or VOL +/
). The ALARM1 or ALARM2 indicator turns off.
Play the radio
1
Press
(power) to turn on your clock radio, then press
AM/FM repeatedly to select radio band you want to
listen to.
2
If you select the FM band, stretch out the FM antenna on
the back of your clock radio and move it around to
improve FM reception.
-OR-
If you select the AM band, adjust the position of your
clock radio for the best reception.
3
4
Press TUNE
/
repeatedly to tune the radio to a
lower or higher frequency.
Press and hold TUNE
available lower or higher station.
/
to search for the next
Note
The search may not stop at a station with a very weak signal.
5
6
Press VOL –/
or VOL +/
to decrease or increase
the volume. Adjust the volume to a comfortable level.
Press (power) to turn off your clock radio.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Digital AM/FM Clock Radio
Use radio station presets
Your clock radio can store 20 station presets for AM and FM.
1
Press
(power) to turn on your clock radio, then press
AM/FM repeatedly to select radio band you want to
listen to.
2
3
4
5
6
Press TUNE
/
to tune your clock radio to the
station you want to save.
Press and hold
blinks.
/MEM/PRESET. The preset number
repeatedly to select the preset
Press TUNE
number you want.
/
Press
/MEM/PRESET again to store the station as a
preset. The preset number stops blinking.
Repeat steps 1 through 4 to save additional stations as
presets.
Recall radio station presets
1
Press
(power) to turn on your clock radio, then press
the AM/FM button repeatedly to select the radio band
you want to listen to.
2
Press
/MEM/PRESET repeatedly to select the preset
station you want.
Use the sleep timer
1
When listening to the radio, press the
(sleep) button
repeatedly to set the sleep timer. Settings include 90
min, 60 min, 45 min, 30 min, 15 min, or OFF. The radio
automatically turns off after the specified amount of
time.
2
3
After the sleep timer is activated, press
(sleep) to
view the time remaining. You can change the sleep
timer duration when the remaining time is displayed by
pressing
(sleep) again.
To stop listening at any time, press
(power).
Download from Www.Somanuals.com. All Manuals Search And Download.
15
NS-CLOPP2
Clean your clock radio
•
Use a soft, dry, clean cloth to clean the exterior of your
clock radio.
•
•
Do not let liquid drip into the inside of your clock radio.
For stubborn stains, use a soft cloth dampened with a
weak solution of mild detergent and water. Dry your
clock radio immediately afterwards with a clean cloth.
Do not use abrasive clothes, thinners, alcohol, or other
chemical solvents, because they may damage the finish
or remove the panel lettering.
Troubleshooting
Problem
Cause/Solution
No power
•
•
Make sure the AC power adapter is connected
securely and correctly to the power outlet.
Make sure that the power outlet is working.
No sound
from the
speakers
•
•
Press VOL +/
to increase the volume.
Make sure that the AC power adapter is
connected securely and correctly to the power
outlet.
•
•
Make sure that your clock radio is turned ON.
Static or noise
when playing
the radio
Make sure that the station is tuned correctly and
that the station has a good signal.
Try another station.
•
•
For FM stations, extend the antenna wire to
improve the reception.
•
For AM stations, adjust the position of your clock
radio for best reception.
The sound is
distorted
•
•
Make sure that the volume level is not set too
high.
Make sure that the station is tuned correctly and
that the station has a good signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Digital AM/FM Clock Radio
Problem
Cause/Solution
The clock
•
This is normal. Turn down the volume to let the
radio cool.
radio gets
warm after
extended play
at high
volume levels
Specifications
Specifications are subject to change without notice.
Power requirement
AC 120V ~ 60 Hz
Power consumption 6W
Dimensions
Tuner
7.9 x 3.2 x 3.2 in. (20 x 8.1 x 8.1 cm)
Band:
FM and AM
Range:
FM - 87.5~107.9 MHz
AM - 520~1710 KHz
20 for AM and FM
Presets:
Legal notices
FCC and IC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
NS-CLOPP2
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
•
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment complies with Industry Canada radiation exposure limits
set forth for an uncontrolled environment.
IC Information:
CAN ICES-3 (B)/NMB-3
Information for Users on Disposal of
Old Equipment
European Union
Note
This symbol is only valid in the European Union.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Digital AM/FM Clock Radio
This symbol indicates that the electrical and electronic
equipment should not be disposed as general
household waste at its end-of-life. Instead, the product
should be handed over to the applicable collection point
for the recycling in accordance with your national
legislation.
By disposing of this product correctly, you will help to
conserve natural resources and will help prevent
potential negative effects on the environment and
human health that could otherwise be caused by
inappropriate waste handling of this product. For more information about
collection point and recycling of this product, please contact your local
municipal office, your household waste disposal service or the shop where
you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
Other Countries Outside the European Union
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
NS-CLOPP2
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Digital AM/FM Clock Radio
One-year limited warranty -
Insignia
Definitions:
The Distributor* of Insignia branded products warrants to you, the original
purchaser of this new Insignia-branded product (“Product”), that the
Product shall be free of defects in the original manufacturer of the material
or workmanship for a period of one (1) year from the date of your purchase
of the Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in the United
States or Canada from a Best Buy branded or Future Shop branded retail
www.futureshop.ca and is packaged with this warranty statement.
How long does the coverage last?
The Warranty Period lasts for one year (365 days) from the date you
purchased the Product. Your purchase date is printed on the receipt you
received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or
workmanship of the Product is determined to be defective by an
authorized Insignia repair center or store personnel, Insignia will (at its sole
option): (1) repair the Product with new or rebuilt parts; or (2) replace the
Product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or parts are
required after the Warranty Period expires, you must pay all labor and
parts charges. This warranty lasts as long as you own your Insignia Product
during the Warranty Period. Warranty coverage terminates if you sell or
otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail store
location, please take your original receipt and the Product to any Best Buy
or Future Shop store. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of protection as
Download from Www.Somanuals.com. All Manuals Search And Download.
21
NS-CLOPP2
the original packaging. If you purchased the Product from a Best Buy or
address listed on the web site. Make sure that you put the Product in its
original packaging or packaging that provides the same amount of
protection as the original packaging.
To obtain warranty service, in the United States call 1-888-BESTBUY,
Canada call 1-866-BESTBUY for Future Shop call 1-800-663-2275. Call
agents may diagnose and correct the issue over the phone.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy or
Future Shop branded retail stores or websites to the original purchaser of
the product in the county where the original purchase was made.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
Customer instruction/education
Installation
Set up adjustments
Cosmetic damage
Damage due to weather, lightning, and other acts of God, such
as power surges
•
•
•
•
•
Accidental damage
Misuse
Abuse
Negligence
Commercial purposes/use, including but not limited to use in a
place of business or in communal areas of a multiple dwelling
condominium or apartment complex, or otherwise used in a
place of other than a private home.
Modification of any part of the Product, including the antenna
Display panel damaged by static (non-moving) images applied
for lengthy periods (burn-in).
•
•
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage or power supply
Attempted repair by any person not authorized by Insignia to
service the Product
•
•
Products sold “as is” or “with all faults”
Consumables, including but not limited to batteries (i.e. AA,
AAA, C etc.)
•
•
Products where the factory applied serial number has been
altered or removed
Loss or Theft of this product or any part of the product
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Digital AM/FM Clock Radio
•
Display panels containing up to three (3) pixel failures (dots that
are dark or incorrectly illuminated) grouped in an area smaller
than one tenth (1/10) of the display size or up to five (5) pixel
failures throughout the display. (Pixel based displays may
contain a limited number of pixels that may not function
normally.)
•
Failures or Damage caused by any contact including but not
limited to liquids, gels or pastes.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR
EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL
EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
Download from Www.Somanuals.com. All Manuals Search And Download.
23
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
V3 ENGLISH
14-0195
Download from Www.Somanuals.com. All Manuals Search And Download.
|