|
Quick Setup Guide NS-WSCC
Remote Wireless Shutter Control for Canon DSLR Cameras
Thank you for purchasing this high-quality Insignia
infrared shutter control for your Canon camera. Because
you do not touch your camera when using the shutter
control, you experience less camera vibration and get
sharper pictures. Your shutter control is especially useful
for taking self-portraits.
4 Point your shutter control directly at your camera’s IR
receiver, then press the shutter button on the front of
your shutter control. When your camera receives the
IR signal, it automatically focuses and takes a picture.
FEATURES
Shutter button
TROUBLESHOOTING
If your camera does not focus and take pictures:
• Make sure that your shutter control is within
16.4 ft (5 m) of the camera’s IR receiver.
• Make sure that your camera is in IR mode. See your
camera’s user manual to activate the IR mode.
• Make sure that your camera has an autofocus feature.
See your camera’s user manual to activate auto focus
(if available).
PACKAGE CONTENTS
• Remote Wireless Shutter Control with battery
• Lanyard
•
Quick Setup Guide
BATT.
• Make sure that the battery for the shutter remote
control is not expired. Replace with a CR2025 battery
if necessary.
Battery holder
Plastic insulation
sheet
• Make sure the line of site between the transmitter and
the infrared receiver is not blocked by the lens or
other obstacles.
USING YOUR REMOTE CONTROL
1 Pull the plastic insulation sheet out of your shutter
control before using it the first time.
2 Set your camera to IR mode. For instructions, see the
documentation that came with your camera.
3 Attach your camera to a tripod, or place it on a steady
surface like a shelf or table.
Scan for compatibility chart
Before using your new product,
please read these instructions to prevent any damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
|