OPERATOR’S MANUAL
650923--X--B
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING
INCLUDE MANUALS: 6695X--X LOWER PUMP END (PN 97999--002) &
R E L E A S E D : 8 -- 3 0 -- 9 6
REVISED:
6--4--10
(REV. 02)
FORM 3638--2 GENERAL INFORMATION MANUAL (PN 97999--353)
650923--X--B
2.062 SQ.” HYDRAULIC MOTOR
0.3:1 RATIO
6” STROKE
FOUR BALL PUMP SERIES
CARBON STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SERVICE KITS
PUMP DATA
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
MODEL 650923-X43-B
• 637164 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shipped with the pump but it is included with each Service Kit. If this
Service/Parts Information is needed, request the Hydraulic Motor
Operator’s Manual from ARO. (Manual 61588--100,
PN 97999--063).
Hydraulic Inlet
3/8--18 NPTF--1(f)
(Not Shown)
• 637230- X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
Hydraulic Motor
61588--100
42-5/32
(1071 mm)
(See Manual 61588--100)
SPECIFICATIONS
Spacer Section
Model Series (Refer to option chart) . . 650923--X43--B
Type . . . . . . . . . . . . . . . . . . . . Hydraulically Operated, Four Ball
Ratio . . . . . . . . . . . . . . . . . . . . 0.3:1
SCREW 93342--1 (3)
WASHER Y14--625--C (3)
Hydraulic Motor . . . . . . . . . . . . 61588--100
Motor Repair Kit . . . . . . . . . . 637164
CONNECTOR (See Figure 2)
Motor Size . . . . . . . . . . . . . . 2.062 sq.’’ (13.3 sq. cm)
Stroke . . . . . . . . . . . . . . . . . . 6’’
26-7/8
(683 mm)
SPACER ROD 93348--1
Hydraulic Inlet . . . . . . . . . . . 3/8’’ -- 18 NPTF--1(f)
Hydraulic Return . . . . . . . . . 1/2” -- 14 NPTF--1(f)
Lower Pump End Series . . . . . 66953--X43
Lower Pump Repair Kit . . . . . 637230--X43
Material Inlet . . . . . . . . . . . . . N/A
SPACER ROD 93348--2 (2)
Material Outlet
3/4’’ NPTF--1(f)
195_ FROM HYDRAULIC INLET
Material Outlet . . . . . . . . . . . 3/4’’ NPTF--1 (f)
14-21/32
(372 mm)
Lower Pump
66953--X43
(See Manual 6695X--X)
PERFORMANCE
Hydraulic Inlet Pressure Range 50 -- 1200 PSI (3.4 -- 83 bar)
Fluid Pressure Range . . . . . . . 15 -- 373 PSI (1 -- 25.7 bar)
Max. Rec’d Cycles / Minute . . . 50
Displacement In3 Per Cycle . . . 82.172
Volume / Cycle . . . . . . . . . . . . . 45.5 oz. (1346 ml)
Cycles Per Gallon . . . . . . . . . . 2.8
FIGURE 1
Flow @ 50 Cycles / Minute . . . . 17.8 GPM (67 lpm)
Noise Level . . . . . . . . . . . . . . . N/A
Accessory Available: 61937--1 Wall Bracket and 66547 Floor Mounting Flange.
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650923--X--B MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6695X--X LOWER PUMP END OPERATOR’S MANUAL
- 61588--100 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
CCN 99713117
Download from Www.Somanuals.com. All Manuals Search And Download.
|