InFocus Projector DP8400x User Manual

High-performance Installation—Innovative Ease of Use  
DP8400x/  
DP8500x  
User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This entire user’s guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, Norwe-  
gian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, please read these instructions.  
Le mode d'emploi complet est disponible sur le CD joint sous forme de fichier pdf d'Adobe Acrobat dans les langues suivantes : anglais, français,  
allemand, italien, norvégien, portugais, espagnol, russe, japonais, coréen, chinois traditionnel, chinois simplifié. Avant d'utiliser ce projecteur, veuillez  
lire ces instructions.  
Die vollständige Benutzeranleitung ist auf der im Lieferumfang enthaltenen CD als Adobe Acrobat PDF-Datei in den folgenden Sprachen verfügbar:  
Englisch, Französisch, Deutsch, Italienisch, Norwegisch, Portugiesisch, Spanisch, Russisch, Japanisch, Koreanisch, Traditionelles Chinesisch und  
Vereinfachtes Chinesisch. Bitte lesen Sie diese Anweisungen vor der Verwendung des Projektors.  
La presente guida è disponibile sul CD allegato, come file Adobe Acrobat pdf, nelle seguenti lingue: inglese, francese, tedesco, italiano, norvegese,  
portoghese, spagnolo, russo, giapponese, coreano, cinese tradizionale e cinese semplificato. Prima di usare questo proiettore, leggere le seguenti istruzioni.  
Hele denne brukerhåndboken finnes på den vedlagte CD-en som en Adobe Acrobat pdf-fil på følgende språk: Engelsk, fransk, tysk, italiensk, norsk,  
portugisisk, spansk, russisk, japansk, koreansk, tradisjonell og forenklet kinesisk. Les diss anvisningene før projektoren tas i bruk.  
Este guia do usuário completo está disponível no CD anexo, como um arquivo pdf do Adobe Acrobat nos seguintes idiomas: inglês, francês, alemão, italiano,  
norueguês, português, espanhol, russo, japonês, coreano, chinês tradicional, chinês simplificado. Antes de utilizar este projetor, leia estas instruções.  
Este manual de uso está disponible en su totalidad en el CD incluido, como archivo pdf de Adobe Acrobat, en los siguientes idiomas: inglés, frances, alemán,  
italiano, noruego, português, español, ruso, japonés, coreano, chino tradicional, chino simplificado. Antes de usar el proyector, lea estas instrucciones.  
Ⱦɚɧɧɨɟ ɪɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ ɜ ɩɨɥɧɨɦ ɨɛɴɟɦɟ ɩɪɟɞɫɬɚɜɥɟɧɨ ɧɚ ɩɪɢɥɚɝɚɟɦɨɦ ɤɨɦɩɚɤɬ-ɞɢɫɤɟ ɜ ɜɢɞɟ pdf-ɮɚɣɥɚ Adobe Acrobat ɧɚ ɫɥɟɞɭɸɳɢɯ  
ɹɡɵɤɚɯ: ɚɧɝɥɢɣɫɤɨɦ, ɮɪɚɧɰɭɡɫɤɨɦ, ɧɟɦɟɰɤɨɦ, ɢɬɚɥɶɹɧɫɤɨɦ, ɧɨɪɜɟɠɫɤɨɦ, ɩɨɪɬɭɝɚɥɶɫɤɨɦ, ɢɫɩɚɧɫɤɨɦ, ɪɭɫɫɤɨɦ, ɹɩɨɧɫɤɨɦ, ɤɨɪɟɣɫɤɨɦ,  
ɬɪɚɞɢɰɢɨɧɧɨɦ ɢ ɭɩɪɨɳɟɧɧɨɦ ɤɢɬɚɣɫɤɨɦ. ɉɟɪɟɞ ɢɫɩɨɥɶɡɨɜɚɧɢɟɦ ɩɪɨɟɤɬɨɪɚ, ɩɪɨɱɢɬɚɣɬɟ ɞɚɧɧɵɟ ɢɧɫɬɪɭɤɰɢɢ.  
ŘųKПꢀПꢁ ꢂ .ŴЕ<Rꢃꢄꢅ$Ű֞ඤŜūʼnƐ CD Ű Adobe Acrobat ų PDF :ꢆ P཯༜ŭŜūऄⲟŚƑūʼnƃŞЖᜑų➸⠰ųKПꢀПꢁ ꢂ  
.Ɨř
ߓ
᰻ʼnŤťŖƃŞЖ␣⠰Е:NXꢇ⠰Е. )⠰Е $Oꢈ⠰Е3PꢉꢄП⠰ЕBP-ꢂP⠰Еꢇ? X⠰ЕRꢊꢈ⠰ЕᎣᒍ⠰Е⺩ઞ⠰Е‱
ת
 
Ԟઞ⠰Е↭
ת
Ԟઞ⠰ЖŘų<Rꢃꢄꢅ$Ɨ؃᰻ŞƐ߰ŰЕKПꢀПꢁ
  .Ɨ྿şŏ⠿ƄŔťŚʼnЖ  
ꢀ&'ꢀ  
ꢀ$GREHꢀ$FUREDWꢀSGIꢀ  
Adobe Acrobat (PDF)  
동봉된 CD에는 Adobe Acrobat pdf 파일 형식의 사용 설명서가 영어, 프랑스어, 독일어, 이탈리아어, 노르웨이어, 포르투갈어, 스페인어, 러시아어, 일본어, 한국  
Download from Www.Somanuals.com. All Manuals Search And Download.  
, 중국어(번체 및 간체)로 제공됩니다. 이 프로젝터를 사용하기 전에 다음 지침을 읽으십시오.  
Declaration of Conformity  
Manufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon  
97070 USA  
Canada  
This Class A digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.  
European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands  
We declare under our sole responsibility that this projector conform to the following  
directives and norms:  
Agency Approvals  
UL, CUL, NOM, IRAM, GOST, C-tick  
Other specific Country Approvals may apply, see please product certification label.  
EMC Directive 89/336/EEC, Amended by 93/68/EEC  
Remote Control Warning  
EMC: EN 55022  
EN 55024  
EN 61000-3-2  
EN 61000-3-3  
Laser radiation class II product; wavelength 650nm; maximum output 1mW. Remote  
control complies with applicable requirements of 21 CFR 1040.10 and 1040.11.  
Remote control complies with applicable requirements of EN 60 825-1: 1994 +A11.  
Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC  
Safety: EN 60950: 2000  
August, 2003  
Do not look into the laser beam emitted  
from the front of the remote control.  
Trademarks  
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple  
Computer, Inc. IBM is a trademark or registered trademark of International Business  
Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered  
trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or  
registered trademarks of Adobe Systems Incorporated. InFocus, ProjectorManager,  
ProjectorNet, and LP are trademarks or registered trademarks of InFocus  
Corporation.  
FCC Warning  
This equipment has been tested and found to comply with the limits for a Class A  
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-  
vide reasonable protection against harmful interference when the equipment is oper-  
ated in a commercial environment. This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and used in accordance with the instruc-  
tion manual, may cause harmful interference to radio communications. Operation of  
this equipment in a residential area is likely to cause harmful interference in which  
case the user will be required to correct the interference at his own expense.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
If you are experienced in setting up presentation systems, use the included  
Quick Set Up card. For complete details on connecting and operating the  
projector, refer to this User’s Guide. Electronic versions of this User’s Guide  
in multiple languages are available on the included CD and on our website.  
Table of Contents  
Introduction  
Positioning the projector  
Connecting a computer  
6
8
9
The website also has technical specifications (an interactive image size cal-  
culator, laptop activation commands, connector pin outs, a glossary, the  
product data sheet), a web store to buy accessories, and a page for online  
registration. See the inside of the back cover for a list of all contact numbers  
and relevant web addresses.  
Required computer connections  
Displaying a computer image  
First-time projector use with Windows 98  
Adjusting the image  
Connecting a video device  
Displaying a video image  
Shutting down the projector  
Troubleshooting your setup  
Using the keypad buttons  
Using the remote control  
Using the audio  
Optimizing computer images  
Presentation features  
Optimizing video images  
Customizing the projector  
Using the menus  
9
11  
12  
14  
15  
17  
19  
19  
27  
28  
29  
30  
30  
31  
31  
32  
33  
36  
40  
40  
40  
41  
43  
44  
44  
47  
48  
Important Operating Considerations  
Do not place the projector on a tablecloth or other soft covering that may  
block the vents. Vents are placed along the back, left and front sides of the  
projector. Do not use a non-approved ceiling mount. In the unlikely event of  
the lamp rupturing, discard any edible items placed in the surrounding area  
and thoroughly clean the area along the sides and in the front of the projec-  
Do not place objects in the areas along the left, back and front sides of the projector  
2 ft (.6m)  
2 ft (.6m)  
Picture menu  
Settings menu  
Maintenance  
Cleaning the lens  
Changing the lens  
Replacing the projection lamp  
Cleaning the dust filter  
Using the security lock  
Appendix  
2 ft (.6m)  
Projected image size  
LED Behavior  
RS-232 commands  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Projector components and features: front  
Introduction  
Your new multimedia projector provides three computer, three video, and  
two audio inputs, one audio output, RS-232 control, and has XGA 1024x768  
resolution. Optional user-changeable short, fixed short, long and super long  
throw lenses make this a flexible product suitable for many different uses.  
The projector is easy to connect, easy to use, and easy to maintain.  
keypad  
heat vent  
speakers  
Product specifications  
To read the latest specifications on your multimedia projector, be sure to  
visit our website. Web address information is located on the back inside  
cover of this User’s Guide.  
air intake  
vent  
Accessories  
remote  
control  
receiver (IR)  
elevator foot release  
lens  
The standard accessories that came with your projector can be found on the  
packing list that came with your projector. Optional accessories are listed in  
the Accessories catalog that came with the projector and can also found on  
our website. See the inside back cover for the web address.  
elevator foot release  
handle  
Online Registration  
Projector components and features: back  
Register your projector on our website to receive product updates,  
announcements, and registration incentives. See the inside back cover for  
the web address.  
air intake  
vent  
air intake  
vent  
back  
foot  
connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
     
Connector Panel  
The projector provides three computer and three video connection options:  
component video  
RS232  
VESA computer  
wired  
remote  
remote  
control  
one M1-D (DVI with USB)  
one VESA computer  
monitor  
M1-D computer  
serial control  
RJ-45  
receiver (IR)  
one BNC (RGBHV and Pr, Pb, Y)  
one component RCA video (Pr, Pb, Y)  
one S-video  
lock  
one composite RCA video  
The projector provides computer and video connectors for audio support:  
two composite RCA stereo audio (L, R)  
one audio out  
computer  
audio  
composite  
video  
external  
speakers  
s-video  
power  
connector  
BNC  
two audio ins for computer  
power switch  
(audio out)  
The projector also provides the following connectors:  
one wired remote  
one monitor out  
RS-232 serial connector (for serial control)  
RJ-45 connector (for networked control via ProjectorNet software)  
The RS-232 Command Line Interface (CLI) specifications and commands  
are available on our website. See the back inside cover of this User’s Guide  
for website information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
   
Positioning the projector  
To determine where to position the projector, consider the size and shape of  
your screen, the location of your power outlets, and the distance between  
the projector and the rest of your equipment. Here are some general guide-  
lines:  
Position the projector on a flat surface at a right angle to the screen. The  
projector (with the standard lens) must be at least 3 feet (0.9m) from the  
projection screen.  
Position the projector within 10 feet (3m) of your power source and  
within 6 feet (1.8m) of your video device (unless you purchase exten-  
sion cables). To ensure adequate cable access, do not place the projector  
within 6 inches (.15m) of a wall or other object.  
If you are installing the projector on the ceiling, refer to the installation  
guide that comes with the Ceiling Mount Kit for more information. To  
turn the image upside down, see “Ceiling” on page 36. We recom-  
mends using an authorized ceiling mount. The Ceiling Mount Kit is  
sold separately; see the Accessories catalog that came with this projec-  
tor or visit our website for more information.  
Position the projector the desired distance from the screen. The distance  
from the lens of the projector to the screen, the zoom setting, and the  
video format determine the size of the projected image. For information  
about image sizes at different distances, see “Projected image size” on  
page 44.  
10 ft high  
image  
Projection angle in 4:3 mode (default)  
10:0  
bottom of image  
100% above lens  
center  
10:0  
1:1  
For the standard lens that comes with the projector, the image exits at a  
given angle. However, the lens shift feature makes the image offset  
variable. The image offset is 100% at a 10:0 ratio when the projector is in  
4:3 mode (default mode). This means that if you have an image 10’  
high, all 10’ will appear above the center of the lens.  
1:0  
bottom of image  
50% below lens  
center  
lens center  
This image offset is 50% when the lens shift is at a 1:1 ratio. This means  
that if you have an image 10’ high, the bottom of the image will be 5’  
below the center of the lens.  
For information about the optional lenses image offsets, see “Projected  
image size” on page 44.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
     
Connecting a computer  
connect computer cable  
Required computer connections  
Connect one end of the VESA computer cable to the Computer 2 connector  
on the projector. Connect the other end to the video port on your computer.  
If you are using a desktop computer, you first need to disconnect the moni-  
tor cable from the computer’s video port.  
Connect the black power cable to the connector on the back of the projector  
and to your electrical outlet.  
connect power cable  
NOTE: Always use the power cable that shipped with the projector.  
Optional computer connections  
connect M1-D cable  
To control your computer’s mouse using the projector’s remote control, con-  
nect the USB and DVI cables to the USB and DVI ports on your computer,  
and connect the other end to the Computer 1 (M1-D) connector on the pro-  
jector. USB drivers must be installed to use the USB feature. For more infor-  
mation, see page 13.  
If your projector cannot receive the remote’s signal due to IR interference,  
you can connect directly to the projector via a remote cable. To do so, plug  
the remote cable into the wired remote connector on the projector. Plug the  
other end into the connector on the remote.  
connect wired remote  
.
connect audio cable  
To have sound with your presentation, connect the audio cable to your com-  
puter and to the corresponding computer Audio In connector on the projec-  
tor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
                   
If you are using a desktop computer and want to see the image on your  
computer screen as well as on the projection screen, plug the monitor cable  
to the Monitor out connector on the projector.  
connect monitor cable  
You can also connect to your computer using a BNC cable. Connect the BNC  
connectors on the BNC cable to the appropriate Computer 3 connectors on  
the projector. Connect the other end to the video port on your computer. If  
you are using a desktop computer, you first need to disconnect the monitor  
cable from the computer’s video port. When all 5 BNCs are connected, the  
projector handles separate synchs on H and V.  
connect BNC cables  
R
G
B
H
V
You can control the projector from an LCD control panel, touch screen, or  
other control device or computer by connecting an RS-232 cable to the pro-  
jector’s Serial connector. Specific RS-232 commands can be found in the Ser-  
vice and Support section of our website and in this User’s Guide’s  
Appendix.  
connect RS-232 cable  
The projector can be managed by ProjectorNet networking software  
through its Network (RJ-45) connector. Contact an authorized dealer or  
visit our website for information on ProjectorNet.  
connect CAT-5 cable  
Network  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
             
Displaying a computer image  
Remove the lens cap.  
remove lens cap  
Press the power switch on the back of the projector to the on position, then  
press the Power button on the top of the projector or the remote.  
2
press Power switch press Power button  
The LED flashes green and the fans start to run. When the lamp comes on,  
the startup screen is displayed and the LED is steady green. It can take a  
minute for the image to achieve full brightness.  
1
? No startup screen? Get help on page 20.  
Turn on your computer.  
turn on computer  
The computer’s image should appear on the projection screen. If it doesn’t,  
press the Computer button on the projector’s keypad.  
Make sure your laptop’s external video port is active.  
activate laptop’s external port  
Many laptops do not automatically turn on their external video port when a  
projector is connected. Usually a key combination like FN + F5 is used to  
turn the external display on and off. Refer to your computer’s documenta-  
tion to learn your computer’s key combination.  
? No computer image? Try pressing the Auto Image  
button on the keypad. Get help on page 20.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
     
First-time projector use with Windows 98  
a
The first time you connect a computer running Windows 98 to the projector,  
the computer recognizes the projector as “new hardware” and the Add  
New Hardware Wizard appears. Follow these instructions to use the Wiz-  
ard to load the correct driver (which was installed with your Windows  
operating system).  
If you are running Windows 2000, Windows ME, or Window XP, skip these  
steps and go to “Adjusting the image” on page 14.  
a Click Next to begin searching for the driver.  
b
b Make sure “Search for the best driver” is selected, then click Next.  
c
c Uncheck any checked boxes, then click Next. Windows automatically  
locates the driver. If this driver has been removed, reload the driver using  
your Windows operating system CD.  
d
d When Windows finds the driver, you are ready to install it. Click Next.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
       
Skip this page if you did not connect a USB mouse cable  
For Windows 98:  
If you connected the USB cable, the Add New Hardware Wizard  
appears again. Drivers must be installed to use the USB functionality.  
The Wizard launches two times.  
The first time it detects a USB Human Interface Device (for the key-  
board).  
The second time it detects a USB Human Interface Device (for the  
mouse).  
For Windows 2000, Windows ME, and Windows XP:  
The USB drivers are automatically installed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
       
Adjusting the image  
release  
button  
adjust height  
release  
button  
Adjust the height of the projector, if necessary, by pressing the release but-  
tons on each side of the projector’s front to extend the elevator feet.  
elevator  
foot  
elevator  
foot  
Position the projector the desired distance from the screen at a 90 degree  
angle (perpendicular) to the screen.  
adjust distance  
See page 44 for a table listing screen sizes and distances.  
adjust Zoom and Focus  
Adjust the zoom or focus by pressing the power Zoom or power Focus  
buttons on the keypad until the desired image size and focus are produced.  
zoom focus  
You can also adjust the zoom and focus via the menus. See page 33  
adjust Lens Shift  
If the image is not on the screen or viewing area, adjust the it by pressing the  
lens shift button on the keypad.  
lens shift  
Press the upper Lens Shift button to shift the lens upward. Press the lower  
Lens Shift button to shift the lens downward  
.
You can also adjust the lens shift via the menus. See page 33.  
adjust Contrast or Brightness  
Adjust the Contrast or Brightness in the Picture menu.  
See page 32 for help with the menus.  
contrast  
brightness  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
             
Connecting a video device  
Standard video connections  
connect A/V cable  
Plug the audio/video (A/V) cable’s yellow connector into the video-out  
connector on the video device. Plug the other yellow connector into the yel-  
low Video 3 connector on the projector.  
Plug a white connector into the left audio out connector on the video device  
and plug a red connector into the right audio out connector on the video  
device. Plug the remaining white connector into the left audio in connector  
on the projector (to the right of the yellow Video 3 connector), and plug the  
red connector into the right audio in connector on the projector.  
Connect the black power cable to the connector on the back of the projector  
and to your electrical outlet.  
NOTE: Always use the power cable that shipped with the projector.  
connect power cable  
Optional video connections  
If the video device uses a round, four-prong S-video connector, plug an  
S-video cable (sold separately) into the S-video connector on the video  
device and into the Video 2 connector on the projector. Use the A/V cable’s  
audio connectors as described directly above (the yellow connectors on the  
A/V cable are not used).  
connect S-video and video cables  
If the video device uses component cable connectors (sold separately), plug  
the cable’s green connectors into the green component-out connector on the  
video device and into the Video 1 green component connector (labeled “Y”)  
on the projector. Plug the component cable’s blue connectors into the blue  
component-out connector on the video device and into the blue component  
connector (labeled “Pb”) on the projector. Plug the component cable’s red  
connectors into the red component-out connector on the video device and  
into the red component connector (labeled “Pr”) on the projector. Use the  
A/V cable’s audio connectors as described above (the yellow connectors on  
the A/V cable are not used).  
connect component cables  
and video cables  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
               
You can also connect to your video device using a BNC cable. Connect the  
BNC connectors of the BNC cable to the appropriate Computer 3 connec-  
tors on the projector. Connect the other end to the video port on your video  
device. Use the A/V cable’s audio connectors as described on the previous  
page (the yellow connectors on the A/V cable are not used).  
connect BNC cables  
R
G
B
H
V
When 4 BNCs are connected, the projector handles a composite synch on H.  
When 3 BNCs are connected, the projector handles a composite synch on G.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
   
Displaying a video image  
Remove the lens cap.  
remove lens cap  
Press the power switch on the back of the projector to the on position, then  
press the Power button on the top of the projector.  
press Power switch press Power button  
2
The LED flashes green and the fans start to run. When the lamp comes on,  
the startup screen is displayed and the LED is steady green. It can take a  
minute for the image to achieve full brightness.  
1
? No startup screen? Get help on page 20.  
Plug in and turn on the video device.  
turn on video device  
The video device’s image should appear on the projection screen. If it  
doesn’t, press the Video button on the keypad.  
Adjust the height of the projector, if necessary, by pressing the release but-  
tons on each side of the projector’s front to extend the elevator feet.  
adjust height  
release  
button  
release  
button  
elevator  
foot  
elevator  
foot  
Position the projector the desired distance from the screen at a 90 degree  
angle to the screen. See page 44 for a table listing screen sizes and distances  
to the screen.  
adjust distance  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
             
Adjust the zoom or focus by pressing the power Zoom or power Focus  
buttons on the keypad until the desired image size and focus are produced.  
adjust Zoom and Focus  
zoom focus  
You can also adjust the zoom and focus via the menus. See page 33  
If the image is not on the screen or viewing area, adjust the it by pressing the  
lens shift button on the keypad.  
adjust Lens Shift  
lens shift  
Press the upper Lens Shift button to shift the lens upward. Press the lower  
Lens Shift button to shift the lens downward  
.
You can also adjust the lens shift via the menus. See page 33.  
Adjust the volume on the keypad or remote.  
adjust volume  
volume  
Adjust the Contrast, Brightness, Color, or Tint in the Picture menu.  
adjust Picture menu  
See page 32 for help with the menus.  
contrast  
brightness  
color  
tint  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
       
Shutting down the projector  
Troubleshooting your setup  
The projector automatically blanks the screen after no active source is  
detected for 30 minutes. This blank screen helps preserve the life of the pro-  
jector. The image returns when an active source is detected or a remote or  
keypad button is pressed.  
If your image appears correctly on the screen, skip to the next section. If it  
does not, troubleshoot the setup. The LED on top of the projector indicates  
the state of the projector and can help you troubleshoot. See “LED Behav-  
ior” on page 47. for information on LED behavior and what it means.  
Screen Save  
The following tables show common problems. In some cases, more than one  
possible solution is provided. Try the solutions in the order they are pre-  
sented. When the problem is solved, you can skip the additional solutions.  
You can make the blank screen appear after five minutes by turning on  
Screen Save in the Settings>System menu. See page 37.  
Power Save  
The projector also has a Power Save feature that automatically turns the  
lamp off after no signals are detected for 20 minutes. After 10 additional  
minutes with no signal, the projector powers down. If an active signal is  
received before the projector powers down, the image is displayed. You  
must press the Power button to display an image after 30 minutes have  
passed. When Power Save is enabled, Screen Save is disabled. See page 37.  
Turning off the projector  
To turn off the projector, press the power button and verify that you want to  
turn the projector off by pressing the power button again within 3 seconds.  
You can cancel the shutdown by not pressing the power button a second  
time. The lamp turns off and the LED blinks green for over 1 minute while  
the fans continue to run to cool the lamp. When the lamp has cooled, the  
LED lights green and the fans stop. Press the power switch on the back of  
the projector and unplug the power cable to completely power off the pro-  
jector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
         
Source Troubleshooting  
Problem  
Solution  
Result  
Plug power cable in, press power switch,  
press power button. Remove lens cap.  
No startup screen  
Correct image  
3
1
2
Computer image projected  
Only startup screen appears  
Press the Computer button  
Activate laptop’s external port  
A
A
A
or restart  
laptop  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
       
Adjust computer refresh rate in Control  
Panel>Display>Settings>Advanced>  
Adapter (location varies by operating  
system)  
Computer image projected  
No computer image, just the words “Signal out of  
range”  
Signal  
out  
range  
of  
A
A
A
You may also need to set a different  
resolution on your computer, as shown  
in the following problem, “Image fuzzy  
or cropped”  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
Set your computer’s display resolution to  
the native resolution of the projector  
(Start>Settings>Control  
Panel>Display>Settings tab,  
select1024x768)  
Image clear and not cropped  
Image fuzzy or cropped  
A
A
A
For a laptop,  
disable laptop  
monitor  
or turn-on dual-  
display mode  
Connect USB cable (page 9) then load USB  
drivers, if needed (page 12). Or, connect  
wired remote cable and reboot your  
computer (page 9).  
Remote controls navigation buttons.  
See page 28 for information on the remote  
Remote control navigation buttons not working  
with my computer  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
   
Projector troubleshooting  
Problem  
Solution  
Result  
Square image  
Image not square  
Adjust keystone the Picture menu  
Correct image  
Adjust the focus on the keypad or  
Sharpness in the Picture>Advanced menu  
Image not sharp  
A B  
A B  
Change aspect ratio to 16:9 in  
Picture>Aspect ratio menu  
Correct image  
Image does not fit 16:9 screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
Turn on/off Ceiling in Settings>System  
menu  
Correct image  
Image upside down  
B
A
A B  
Image reversed left to right  
Turn on/off Rear in Settings>System menu  
Correct image  
A
A B  
Correct image  
Projected colors don’t match source  
Adjust color, tint, color temperature,  
brightness, contrast in the menus  
COLOR  
COLOR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
     
Make sure vents aren’t blocked; allow  
projector to cool for one minute  
Unplug projector; wait one minute; plug in  
projector and turn it on: lamp lights  
Lamp won’t turn on, Temp LED solid red (page 47)  
solid  
red  
temp  
lamp  
Lamp won’t turn on, Lamp LED blinking red  
(page 47)  
Lamp must be replaced (page 41)  
Lamp turns on  
temp  
blinking  
red  
lamp  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
   
Correct image  
Move projector, adjust zoom or lens shift on  
keypad, adjust height  
Image not centered on screen  
Adjust horizontal or vertical position in  
Picture>Advanced menu  
Still having problems?  
If you need assistance, visit our website or call us. See the inside of the back  
cover for a list of all contact numbers and relevant web addresses.  
This product is backed by a limited two-year warranty. An extended war-  
ranty plan may be purchased from your dealer. When sending the projector  
in for repair, we recommend shipping the unit in its original packing mate-  
rial, or having a professional packaging company pack the unit. An optional  
ATA shipping case is available for purchase that provides adequate protec-  
tion for shipping. Please insure your shipment for its full value.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
     
Using the keypad buttons  
Most buttons are described in detail in other sections, but here is an over-  
view of their functions:  
power–turns the projector on (page 11) and off (page 17).  
lens shift–shifts the projected image up or down  
zoom–moves the projected image closer or further away.  
focus–adjusts the clarity.  
menu–opens the on-screen menus (page 32).  
up/down arrows–navigates to and adjusts settings in the menus (page 32).  
select–confirms choices made in the menus (page 32).  
volume–adjusts sound (page 29).  
video and computer–changes the active source.  
temp–alerts you to possible temperature-related problems (page 47).  
lamp–alerts you to possible lamp-related problems (page 47).  
Temp  
menu navigation buttons  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
 
LED  
navigation buttons  
Using the remote control  
The remote uses two (2) provided AAA batteries. They are easily installed  
by sliding the cover off the remote's back, aligning the + and - ends of the  
batteries, sliding them into place, and then replacing the cover.  
laser  
button  
To operate, point the remote at the projection screen or at the projector (not  
at the computer). The range of optimum operation is about 30 feet (9.14m).  
To use the laser pointer, press and hold the Laser button. The laser turns off  
when the button is released, or times out after two (2) minutes of continu-  
ous operation.  
backlight button  
source buttons  
WARNING: Do not look into the laser beam emitted from the top of the  
remote control.  
The remote contains four Source buttons that allow you to assign a particu-  
lar input to a specific source. Simply press the numbered Source buttons to  
travel to whatever four sources you wish to have available.  
Press the remote's Menu button to open the projector's menu system. Use  
the arrow buttons to navigate, and the Select button to select features and  
adjust values in the menus.  
Troubleshooting the remote  
Make sure the batteries are installed in the proper orientation and are  
not dead. The LED at the top of the remote lights when any button is  
pressed when the battery power is adequate.  
The remote also has a power button to turn the projector on and off, volume  
buttons and a mute button to control the sound, a backlight button to light  
the remote's buttons in the dark, and a video and computer button to switch  
between those two sources.  
Make sure you’re pointing the remote at the projector, not the com-  
puter, and are within the remote range of 30 feet (9.14m).  
If you are trying to control your computer’s mouse, make sure a mouse  
cable is connected. If using a the USB cable that is part of the M1 cable,  
make sure the correct drivers are installed.  
Two presentation-specific features are also provided. Use the blank button  
to display a blank screen instead of the current slide; use the effect button to  
invoke a user-definable action, such as freeze, PiP, or magnify.  
The Auto Image button reacquires the computer image and the Presets but-  
ton lets you customize the settings for each source. Up to three Preset set-  
tings can be customized and saved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
   
Using the audio  
connect audio cable  
To play sound from the projector, connect your source to the Audio In con-  
nector on the projector.  
To adjust the volume, use the buttons on the keypad or remote.  
To adjust the balance, or loudness, use the Audio menu (see page 36).  
To mute the sound, press the Mute button.  
Troubleshooting audio  
If there is no sound, check the following:  
adjust volume  
volume  
Make sure the audio cable is connected.  
Make sure mute isn’t active.  
Make sure the volume is turned up enough. Press the volume button  
on the keypad or remote.  
Make sure you are connected to the corresponding audio in for your  
source. Computer 1 and 3 share a single audio input. Computer 2 has  
its own audio input. Video 1, 2 and 3 share a single stereo input.  
computer  
1
computer 1 and 3  
audio in  
corresponding audio  
Adjust the audio source.  
audio in  
computer  
2
computer 2 and  
If playing a video, make sure the playback has not been paused.  
corresponding audio  
computer  
3
computer in  
Connecting external speakers  
The projector can be attached to external speakers that have their own  
power source by plugging speaker cables into the projector’s Audio Out  
connector.  
audio out  
external speakers  
speaker  
cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
   
Optimizing computer images  
Presentation features  
After your computer is connected properly and the computer’s image is on  
the screen, you can optimize the image using the onscreen menus. For gen-  
eral information on using the menus, see page 32.  
Several features are provided to make giving presentation easier. The fol-  
lowing is an overview, details are found in the menu section on page 32.  
The remote’s Effect button allows you to assign various features to the  
key. The default effect is Magnify.You can select from Blank, Mute,  
Aspect Ratio, Source, Auto Image, Freeze, Magnify, About, and PiP  
Source. See page 38 for details.  
Adjust the Keystone, Contrast, or Brightness in the Picture menu.  
Change the Aspect Ratio. Aspect Ratio is the ratio of the image width to  
image height. TV screens are usually 1.33:1, also known as 4:3. HDTV  
and most DVDs are 1.78:1, or 16:9. Choose the option that best fits your  
input source. See page 33 for details.  
The Freeze effect allows you to freeze the displayed image. This is use-  
ful if you want to make changes on your computer without your audi-  
ence seeing them.  
Adjust the Color Temperature in the Advanced menu.  
The Blank button on the remote allows you to display a blank screen  
instead of the active source. See page 37.  
Adjust the Phase, Tracking, or Horizontal or Vertical position in the  
Advanced menu.  
The PiP Source effect lets you change the video source in a smaller win-  
dow on top of the computer image. See page 38.  
Once you have optimized the image for a particular source, you can  
save the settings using Presets. This allows you to quickly recall these  
settings later. See page 34.  
The Startup Logo menu option lets you change the default startup  
screen to a black, white, blue, or a custom logo screen via Logo Cap-  
ture. See page 37.  
Two menu options, Power Save and Screen Save, are provided to auto-  
matically shut down the projector after several minutes of inactivity or  
display a blank screen. This helps preserve lamp life. See page 36 and  
page 37.  
A Low Power menu option is also available to help lower the projec-  
tor’s fan sound volume. See page 36.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
     
Optimizing video images  
Customizing the projector  
After the video device is connected properly and the image is on the screen,  
you can optimize the image using the onscreen menus. For general informa-  
tion on using the menus, see page 32.  
You can customize the projector for your specific setup and needs. See  
page 36 to page 40 for details on these features.  
For rear projection, turn Rear mode on in the Settings>System menu.  
Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture  
menu. See page 33.  
For ceiling mounted projection, turn Ceiling mode on in the Set-  
tings>System menu.  
Change the Aspect ratio. Aspect ratio is the ratio of the image width to  
image height. TV screens are usually 1.33:1, also known as 4:3. HDTV  
and most DVDs are 1.78:1, or 16:9. Choose the option that best fits your  
input source. See page 33.  
Specify which source the projector checks first for an active signal dur-  
ing power-up.  
Specify the function of the Effect Key on the remote.  
Turn the projector’s on-screen display messages on and off.  
Turn on power saving features.  
Select a Sharpness setting. See page 35.  
Adjust the Color Temperature. Select a listed value, or select User and  
individually adjust the intensity of the red, green, and blue color. See  
page 35.  
Specify blank screen colors and startup logos.  
Specify the menu language.  
Manage your projector via ProjectorNet software. See page 10 for more  
information.  
Control your projector using RS232 commands. See page 10.  
Customize the projector for your specific installation using optional  
long or short throw lenses. See the inside back cover of this User’s  
Guide for ordering information.  
Gain control of your projector from your laptop with InFocus  
ProjectorManager, a free application that turns any PC into an  
advanced projector remote control.  
ProjectorManager can be downloaded from our website link found on  
the CD that came with your projector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
       
Using the menus  
Dot  
To open the menus, press the menu button on the keypad or remote. (The  
menus automatically close after 60 seconds if no buttons are pressed.) The  
Main menu appears. Use the arrow buttons to move up and down to high-  
light the desired submenu, then press the Select button.  
Menu  
button  
To change a menu setting, highlight it, press Select, then use the up and  
down arrow buttons to adjust the value, select an option using radio but-  
tons, or turn the feature on or off using check boxes. Press Select to confirm  
your changes. Use the arrows to navigate to another setting. When your  
adjustments are complete, navigate to Previous, then press Select to go to  
the previous menu; press the Menu button at any time to close the menus.  
Keypad navigation  
buttons  
Main menu  
Dots appear before the menu name. The number of dots indicate the menu’s  
level, ranging from one (the Main menu) to four (the most nested menus).  
Picture  
menu  
Dots  
The menus are grouped by usage:  
The Picture menu provides image adjustments.  
Settings  
menu  
The Settings menu provides set-up type adjustments that are not  
changed often.  
The About menu provides a read-only display of information about the  
projector and source.  
Certain menu items may be grayed out until a particular source is con-  
nected. For example, Sharpness is only available for video sources and will  
be hidden when a computer source is active. Other menu items may be  
grayed out when they are not available. For example, Brightness is grayed  
out until an image is active.  
About menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
     
Picture menu  
To adjust the following six settings, highlight the setting, press Select, use  
the up and down arrows to adjust the values, then press select to confirm  
the changes.  
Keystone Vertical  
decreasing keystone  
increasing keystone  
Zoom: allows you to adjust a lens to zoom in and out. Highlight Zoom,  
then press the up or down arrows on the keypad or remote.  
Focus: allows you to adjust the lens focus for an image. Highlight Focus,  
then press the up or down arrows on the keypad or remote.  
Lens Shift: allows you to mechanically shift the lens. Highlight Lens Shift,  
then press the up or down arrows on the keypad or remote.  
Keystone Vertical: adjusts the image vertically and makes a squarer image  
Keystone Horizontal  
by using an adjustable scale band.  
Keystone Horizontal: adjusts the image horizontally and makes a squarer  
image by using an adjustable scale band.  
Contrast: controls the degree of difference between the lightest and darkest  
parts of the picture and changes the amount of black and white in the  
image.  
Brightness: changes the intensity of the image.  
Color: (video sources only) adjusts a video image from black and white to  
fully saturated color.  
Aspect Ratio  
Tint: adjusts the red-green color balance in the image.  
Aspect Ratio: Aspect ratio is the ratio of the image width to image height.  
TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs are  
1.78:1, or 16:9. The default is 4:3, which displays the input resized up or  
down to fill the display area.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
 
Presets: The provided Presets optimize the projector for displaying com-  
puter presentations, photographs, film images, and video images. (Film  
input is material originally captured on a film camera, like a movie; video  
input is material originally captured on a video camera, like a TV show or  
sporting event.) You can use the preset as a starting point, then further cus-  
tomize the settings for each source. The settings you customize are saved in  
the preset for each source. To restore the factory default settings, choose Fac-  
tory Reset in the Settings>Service menu.  
Save Settings  
There are also three user-definable presets. To set a preset for the current  
source, adjust the image, then choose Save User 1, 2, or 3 in the Save Set-  
tings menu. You can recall these settings in the future by selecting the  
appropriate user presets.  
Presets  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
 
Advanced settings  
Sharpness: (video sources only) changes the clarity of the edges of a video  
image. Select a sharpness setting.  
Sharpness  
Color Space: This option applies to computer and component video  
sources. It allows you to select a color space that has been specifically tuned  
for the input signal. When Auto is selected, the projector automatically  
determines the standard. To choose a different setting, turn off Auto, then  
choose RGB for computer sources, choose either SMPTE240, REC709 or  
REC601 for component video sources.  
Color Temperature: changes the intensity of the colors. Select a listed  
value, or select User and individually adjust the intensity of the red, green,  
and blue colors.  
Color Space  
Video Standard: when set to Auto, the projector attempts to automatically  
pick the video standard based on the input signal it receives. (The video  
standard options may vary depending on your region of the world.) If the  
projector is unable to detect the correct standard, the colors may not look  
right or the image may appear “torn.” If this happens, manually select a  
video standard by selecting NTSC, PAL, or SECAM from the Video Stan-  
dard menu.  
Color Temperature  
Overscan: (video sources only) removes noise around the video image.  
The following 4 options are for computer sources only.  
Phase: adjusts the horizontal phase of a computer source.  
Tracking: adjusts the vertical scan of a computer source.  
Horizontal / Vertical Position: adjusts the position of a computer source.  
Video Standard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
   
Settings menu  
Audio: allows adjustments to the Balance and Volume. Also allows you to  
turn on and off the Internal speakers, and projector startup Chime.  
Settings  
menu  
Audio  
Sources: allows you to assign a particular input to a specific source key  
when using the Integrator remote. Also allows selection of a default Startup  
Source and enables or disables Autosource.  
Sources>Power-up Source: this determines which source the projector  
checks first for active signal during power-up.  
Sources>Autosource: When Autosource is not checked, the projector  
defaults to the source selected in Powerup Source. If no source is found, a  
blank screen displays. When Autosource is checked, Powerup Source deter-  
mines which source the projector defaults to at power-up. If no signal is  
present, the projector checks the sources in order until a source is found or  
until power down.  
Sources  
Powerup  
Source  
System>Rear: reverses the image so you can project from behind a  
translucent screen.  
Ceiling: turns the image upside down for ceiling-mounted projection.  
IR Receivers: turns individual IR receivers off or on to avoid environ-  
mental interference.  
Auto Power: When Auto Power is checked, the projector automatically  
goes into the startup state after the projector is powered on. This allows  
control of ceiling mounted projectors with a wall power switch.  
IR Receivers  
System menu  
Display Messages: displays status messages (such as “Searching” or  
“Mute”) in the lower-left corner of the screen.  
Low Power: toggles between on and off. Turn it on to lower the light out-  
put of the lamp. This also lowers the fan speed, making the projector qui-  
eter.  
NND: prevents your notebook computer from going into Screen Save  
mode (functions only when the USB connector is plugged in).  
Power Save: automatically turns the lamp off after no signals are  
detected for 20 minutes. After 10 additional minutes with no signal, the  
projector powers down. If an active signal is received before the projec-  
tor powers down, the image will be displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
           
Screen Save: automatically blanks the screen after no signals are  
detected for five minutes. The image returns when an active source is  
detected or a remote or keypad button is pressed. Screen Save is disabled  
when Power Save is enabled.  
Save Screen  
Startup Logo: allows you to display a blank Black, White, or Blue screen  
instead of the default screen at startup and when no source is detected. It  
also allows you to capture and display a custom startup screen.  
To capture a custom logo, display the image you want to capture on your  
computer and select the Logo Capture option. From the Logo Capture  
menu, use the Capture Position X and Capture Position Y adjustments to  
frame the logo to be captured. Press Capture Start in the Logo Capture  
menu. The projector will let you know if the capture was a success or a  
failure.  
The next time you start the projector, the custom logo you captured dis-  
plays.  
Startup Logo  
Logo Capture  
Blank Screen: determines what color is displayed when you press the  
Blank button on the remote.  
Blank Screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
         
PiP: (Picture in Picture) allows you to overlay a smaller window showing  
the video source on top of the larger computer source window. Only video  
sources 2 and 3 (composite and S-video) support PiP. You must have both a  
computer and video source connected to use PiP. You can’t show a com-  
puter image in the smaller PiP window, only a video image. You can select a  
small, medium, or large window. You can also move the PiP window on the  
screen using the PiP Position X and Y options, or the Upper left, Upper  
Right, Lower Left, or Lower Right options in the menu. Press the up and  
down arrows to change the position.  
PiP menu  
PiP Enable  
PiP Position  
Effect Key: allows you to assign a different function to the Effect button on  
the remote to quickly and easily use the effect. Only one effect can be  
enabled at a time. Highlight an effect and press Select to choose a different  
one.  
Blank: shows an empty screen.  
Effect Key  
Mute: turns off all sound.  
Aspect Ratio: sets the ratio of the image width to image height.  
Source: cycles through the available sources.  
Auto Image: causes computer sources to be reacquired.  
Freeze: pauses the projected image.  
Magnify: Is the default effect. It allows you to enlarge a section of the  
projected image.  
About: displays the About menu.  
PiP Source: changes the video source of Picture in Picture smaller win-  
dow display on the projected screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
       
Network: The projector has an RJ45 Ethernet connector that supports net-  
work connections and TCP/IP protocols. This will allow for the control and  
management of the projector over a corporate network. The following fields  
are accessible when DHCP is not checked and available for manual entry of  
data.  
IP Address: Identifies the projector on the network.  
Network  
Network  
Info  
Subnet mask: Separates the network address part of the IP address.  
Default gateway: The IP address of the local router.  
DHCP: Select this to automatically obtain an IP address, Subnet mask,  
and Default gateway.  
Network Info: Provides information on the network configuration.  
The Network Info menu is informational and cannot be edited. It displays  
the current IP Address, Subnet Mask, Default Gateway, and the projector’s  
MAC Address.  
Language: allows you to select a language for the onscreen display of  
menus and messages.  
Service: to use these features, highlight them and press Select.  
Factory Reset: restores all settings (except Lamp Hours and Network set-  
tings) to their default after displaying a confirmation dialog box.  
Language  
Lamp Reset: resets the lamp hours counter in the About menu to zero. Do  
this only after changing the lamp. It displays a confirmation dialog box.  
Filter Reset: resets the filter counter in the About menu to zero. Do this  
only after cleaning the filter. It displays a confirmation dialog box.  
Service Code: only used by authorized service personnel.  
Service menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
       
Maintenance  
clean the lens  
with a soft dry cloth  
and non-abrasive  
cleaner  
NOTE: When you are performing maintenance activities on your projector,  
keep in mind that you should only remove screws that are single-slot, or  
flathead, screws. Any other type of screw, such as a phillips or star should  
not be removed. These types of screws should only be removed by technical  
support experts.  
Cleaning the lens  
1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.  
Avoid using an excessive amount of cleaner, and don’t apply the  
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh  
chemicals might scratch the lens.  
turn off and unplug  
the projector  
2 Lightly wipe the cleaning cloth over the lens in a circular motion. If you  
don’t intend to use the projector immediately, replace the lens cap.  
Changing the lens  
Long throw and short throw lenses are available with your projector.  
slide lever in slot to  
pop open cover  
front  
bezel  
lens release holes  
1 Turn off the projector and unplug the power cable.  
cover  
2 Turn the projector upright with the lens facing upward and use a screw-  
driver to remove the two screws from the front bezel release holes on the  
bottom of the projector.  
3 Lift off the front bezel.  
4 Gently place a flathead screwdriver into the slot on the top of the projec-  
tor (it is by the right speaker) and slide the small lever toward the right  
speaker. The cover that protects the lens and the lamp housing pops up.  
5 Loosen the captive screw to the door that covers the lens housing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
     
6 To remove a lens, push the lever inside the lens housing and turn the  
lens counterclockwise until it stops. Remove the lens.  
lever inside  
lens housing  
7 To install a new lens, place it in the opening through the front of the pro-  
jector, aligning the red dot (near the base of the lens) with the red dot on  
the projector. Turn clockwise until you feel the lens click into place.  
8 Tighten the captive screw to the lens housing door. Place the front bezel  
back onto the projector and replace the two screws on the bottom of the  
projector. Replace the cover that protects the lens and the lamp housing  
on top of the projector.  
Replacing the projection lamp  
About menu  
The lamp hour timer in the About menu counts the number of hours the  
lamp has been in use. Twenty hours before the specified end of the lamp’s  
life, the message “Replace lamp” briefly appears on the projected screen.  
After twenty additional hours, the lamp will no longer light. You can order  
new lamp modules from your dealer. See the Accessories catalog that came  
with the projector or visit our website for information.  
turn off and unplug  
the projector  
1 Turn off the projector and unplug the power cable.  
wait 60 minutes  
2 Wait 60 minutes to allow the projector to cool thoroughly.  
3 Gently place a flathead screwdriver into the slot on the top of the projec-  
tor (it is by the right speaker) and slide the small lever toward the right  
speaker. The cover that protects the lamp housing and the lens pops up.  
cover  
slide lever in slot to  
pop open cover  
The lamp module is on the right.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
     
4 Loosen the three captive screws on the lamp module.  
WARNINGS:  
loosen the captive screws on lamp module  
To avoid burns, allow the projector to cool for at least 60 minutes before  
you replace the lamp.  
Do not drop the lamp module. The glass may shatter and cause injury.  
Do not touch the glass lamp screen. Fingerprints can obscure projection  
sharpness.  
Be extremely careful when removing the lamp housing. In the unlikely  
event that the lamp ruptures, small glass fragments may be generated.  
The lamp module is designed to contain most of these fragments, but  
use caution when removing it.  
5 Carefully remove the lamp module by grasping and lifting the metal  
bail wire. Dispose of the lamp in an environmentally proper manner.  
6 Install the new lamp module, making sure that it is properly seated.  
7 Tighten the three captive screws.  
8 Replace the cover over the lamp module by inserting the tabs into the  
remove module using bail wire  
tab bays and pushing the rest of the cover down into place.  
9 Plug in the power cable, press the power switch then press the Power  
button to turn the projector back on.  
10 Reset the lamp hour timer. See page 39 for more information.  
Resetting the lamp timer  
If the lamp timer has reached the maximum number of hours for the projec-  
tor lamp, the LED on the projector’s keypad will show a lamp error (see  
“LED Behavior” on page 47). To reset the lamp timer, simultaneously press  
the decrease volume button and increase volume button on the keypad for  
10 seconds. At that point the LED will turn green and you can power on the  
projector. You can also navigate to the Settings>Service menu and select  
Lamp Reset to reset the lamp timer.  
reset lamp time in Service menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
Cleaning the dust filter  
1 Turn off the projector and unplug the power cable.  
turn off and unplug  
the projector  
2 Wait 60 minutes to allow the projector to cool thoroughly.  
WARNING: To avoid burns, allow the projector to cool for at least 60  
minutes before you clean or replace the dust filter.  
wait 60 minutes  
3 Remove the dust filter grill door on the side of the projector by pulling  
down on the two tabs at the grill’s top.  
4 Press the tab on the center of the dust filter and lift it off.  
5 Clean the filter using a vacuum set on low power.  
6 Replace the dust filter and the dust filter grill door.  
7 Reset the filter hour timer.  
remove dust filter  
Troubleshooting  
If the Temp and Lamp LEDs indicate a problem with the filter, check the fol-  
lowing:  
remove dust filter grill  
Use a soft cloth to wipe the mirrors on the dust filter grill.  
Remove the dust filter and use a soft cloth to wipe the window behind  
the dust filter.  
Replace the dust filter and the dust filter grill.  
Using the security lock  
The projector has a security lock for use with a cable lock system. See the  
Accessories catalog that came with the projector, or visit our website, for  
ordering information. Refer to the information that came with the lock for  
instructions on how to use it.  
security lock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
     
Table 2:  
Appendix  
Image sizes for short throw lens (1.1 - 1.5:1)  
Projected image size  
Table 1:  
Distance to  
screen  
(feet/m)  
Minimum  
Diagonal  
(feet/m)  
Maximum  
Diagonal  
(feet/m)  
Image sizes for standard lens (1.5 - 2.2:1 lens throw)  
15/4.6  
20/6.1  
12.5/3.81  
16.67/5.08  
20.83/6.35  
25.42/7.75  
17.05/5.20  
22.73/6.93  
28.41/8.66  
34.66/10.56  
Distance to  
screen  
(feet/m)  
Minimum  
Diagonal  
(feet/m)  
Maximum  
Diagonal  
(feet/m)  
25/7.6  
30.5/9.3  
3/0.9  
5/1.5  
1.7/0.52  
2.84/0.87  
5.68/1.73  
8.52/2.60  
11.36/3.46  
14.20/4.33  
17.05/5.2  
19.89/6.06  
22.73/6.93  
25.85/7.88  
2.5/0.76  
4.17/1.27  
The image offset range for the short throw lens is 10:1 (100%) to 1:1 (50%).  
10/3.0  
15/4.6  
20/6.1  
25/7.6  
30/9.1  
35/10.7  
40/12.2  
45.5/13.9  
8.33/2.54  
Table 3:  
12.5/3.81  
Image sizes for fixed focus short throw lens (0.8:1)  
16.67/5.08  
20.83/6.35  
25.0/7.62  
Distance to  
screen  
(feet/m)  
Diagonal  
(feet/m)  
29.17/8.89  
33.33/10.16  
37.92/11.56  
3/0.9  
5/1.5  
10/3  
4.69/1.43  
7.81/2.38  
15.63/4.76  
18.75/5.72  
The image offset range for the standard lens is 10:1 (100%) to 1:1 (50%).  
12/3.7  
Table 2:  
The optimal offset setting for the fixed focus short throw lens is 50% (on  
axis).  
Image sizes for short throw lens (1.1 - 1.5:1)  
Distance to  
screen  
(feet/m)  
Minimum  
Diagonal  
(feet/m)  
Maximum  
Diagonal  
(feet/m)  
2/0.6  
5/1.5  
1.67/0.51  
4.17/1.27  
8.33/2.54  
2.27/0.69  
5.68/1.73  
11.36/3.46  
10/3.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
   
Table 4:  
Table 5:  
Image sizes for long throw lens (2.2 - 4.1:1)  
Image sizes for super long throw lens 3.9 - 7.3:1)  
Distance to  
screen  
(feet/m)  
Minimum  
Diagonal  
(feet/m)  
Maximum  
Diagonal  
(feet/m)  
Distance to  
screen  
(feet/m)  
Minimum  
Diagonal  
(feet/m)  
Maximum  
Diagonal  
(feet/m)  
4.2/1.3  
10/3.0  
1.28/0.39  
3.05/0.93  
4.57/1.39  
6.1/1.86  
2.39/0.73  
5.68/1.73  
7.5/2.3  
10/3  
1.28/0.39  
1.71/0.52  
2.57/0.78  
3.42/1.04  
4.28/1.3  
2.4/0.73  
3.21/.98  
15/4.6  
8.52/2.6  
15/4.6  
4.81/1.47  
20/6.1  
11.36/3.46  
14.2/4.33  
20/6.1  
6.41/1.95  
25/7.6  
7.62/2.32  
9.15/2.79  
10.67/3.25  
12.2/3.72  
13.72/4.18  
15.24/4.65  
16.77/5.11  
18.29/5.58  
19.82/6.04  
21.34/6.5  
22.87/6.97  
24.39/7.43  
25.37/7.73  
25/7.6  
8.01/2.44  
30/9.1  
17.05/5.2  
30/9.1  
5.14/1.57  
5.99/1.83  
6.85/2.09  
7.71/2.35  
8.56/2.61  
9.42/2.87  
10.27/3.13  
11.13/3.39  
11.99/3.65  
12.84/3.91  
13.7/4.18  
14.55/4.44  
15.41/4.7  
16.27/4.96  
17.12/5.22  
17.98/5.48  
18.84/5.74  
19.69/6  
9.62/2.93  
35/10.7  
40/12.2  
45/13.7  
50/15.2  
55/16.8  
60/18.3  
65/19.8  
70/21.3  
75/22.9  
80/24.4  
83/25.4  
19.89/6.06  
22.73/6.93  
25.57/7.79  
28.42/8.66  
31.25/9.53  
34.09/10.39  
36.93/11.26  
39.77/12.12  
42.61/12.99  
45.45/13.85  
47.27/14.41  
35/10.7  
40/12.2  
45/13.7  
50/15.2  
55/16.8  
60/18.3  
65/19.8  
70/21.3  
75/22.9  
80/24.4  
85/25.9  
90/27.4  
95/29  
11.22/3.42  
12.82/3.91  
14.42/4.4  
16.03/4.88  
17.63/5.37  
19.23/5.86  
20.83/6.35  
22.44/6.84  
24.04/7.33  
25.64/7.82  
27.24/8.3  
28.85/8.79  
30.45/9.28  
32.05/9.07  
33.65/10.26  
35.26/10.75  
36.86/11.23  
The image offset range for the long throw lens is 10:1 (100%) to 1:1 (50%).  
100/30.5  
105/32  
110/33.5  
115/35.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
Table 5:  
Image sizes for super long throw lens 3.9 - 7.3:1)  
Distance to  
screen  
(feet/m)  
Minimum  
Diagonal  
(feet/m)  
Maximum  
Diagonal  
(feet/m)  
120/36.6  
125/38.1  
130/39.6  
135/41.1  
140/42.7  
146.5/44.7  
20.55/6.26  
21.4/6.52  
38.46/11.72  
40.06/12.21  
41.67/12.7  
43.27/13.19  
44.87/13.68  
46.96/14.31  
22.26/6.78  
23.12/7.05  
23.97/7.31  
25.09/7,65  
The image offset range for the super throw lens is 10:1 (100%) to 1:1 (50%).  
NOTE: Visit our website for an interactive image size calculator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
LED Behavior  
Power: solid red  
Temp: N/A  
Lamp: blinking red  
Lamp wont strike (blinks one time)  
Lamp has exceeded lamp hours limit  
(blinks two times)  
LED color/behavior  
Meaning  
Lamp has failed (blinks three times)  
Lamp door is open (blinks four times)  
Power: blinking green  
Temp: N/A  
Lamp: N/A  
The power switch has been toggled  
on and the software is initializing, or  
the projector is powering down and  
the fans are running to cool the lamp.  
Turn off the projector and wait one  
minute, then turn the projector on  
again. If the projector has exceeded  
its lamp life limit, replace the lamp  
and reset the lamp timer. Please con-  
tact Technical Support if the problem  
persists.  
Power: blinking green (once)  
Temp: N/A  
Lamp: N/A  
Power Save or Screen Save.  
Power: solid green  
Temp: N/A  
Lamp: N/A  
The power switch has been toggled  
on and the software has initialized or  
the projector has been powered off  
via the remote.  
Power: solid red  
Temp: blinking red  
Lamp: N/A  
Fan failure. Make sure the vents arent  
blocked. Contact Technical Support if  
the problem persists.  
Power: solid green  
Temp: blinking red  
Lamp: blinking red  
If Temp and Lamp are flashing simulta-  
neously, the filter hasnt been cleaned  
in 100 hrs.  
Power: solid red  
Temp: solid red  
Lamp: N/A  
The projector is overheating. Contact  
Technical Support if the problem per-  
sists.  
If Temp and Lamp are flashing simulta-  
neously (twice), the cooling air filter  
may be dusty. Please see Cleaning  
the dust filteron page 43.  
Power: solid red  
Temp: N/A  
Lamp: N/A  
Unidentified error. Please contact  
Technical Support.  
If Temp and Lamp are flashing alter-  
nately, the projector is below temper-  
ature specifications. Please use the  
projector in an environment between  
0°C/32°F to 35°C/95°F. Contact  
Technical Support if the problem per-  
sists.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
   
A read command returns the range and the current setting, for example:  
RS-232 commands  
Communication Configuration  
Visit our website for additional RS-232 settings and information.  
Read Command Examples  
Function  
Brightness  
Volume  
Command  
(BRT?)  
Response  
(96-160,128)  
(0-32, 0)  
To control this projector via RS-232, connect a null modem cable and set the  
control system serial port settings to match the following communication  
configuration:  
(VOL?)  
RS-232 Port Settings  
Lamp Hours  
(LMP?)  
(0-65534, 42)  
Setting  
Value  
19,200  
8
A write request example:  
(AAA####) where  
Bits per second  
Data bits  
(starts the command  
Parity  
None  
1
AAA denotes the command  
#### denotes the value to be written  
(leading zeros not necessary)  
) ends the command  
Stop bits  
Flow control  
Emulation  
None  
VT100  
Some commands have ranges, while others are absolute. If a number greater  
than the maximum range is received, it is automatically set to the maximum  
number for that function. If a command is received that is not understood, a  
"?" is returned. With absolute settings, "0" is off, 1-9999 is on. The one excep-  
tion is the Power command, where 0 is off and 1 is on.  
Command Format  
All commands consist of 3 alpha characters followed by a request, all  
enclosed in parentheses. The request can be a read request (indicated by a  
"?") or a write request (indicated by 1 to 4 ASCII digits).  
A read request example:  
(AAA?) where  
To assure the projector can process a command, wait 3 seconds before enter-  
ing the next command.  
( starts the command  
AAA denotes the command  
? denotes the read request  
) ends the command  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
 
Write Command Examples  
Com-  
mand  
De-  
fault  
Function  
Min  
Max  
Step  
Function  
Brightness  
Power  
Command  
(BRT140)  
(PWR0)  
Response  
Auto Power  
0: disable  
1: enable  
APO at RW  
0
1
0
Sets the brightness to 140  
Turns power off  
Aspect Ratio  
0: Native  
1: 16:9  
ARZ at RW  
0
0
2
1
2
Power  
(PWR1)  
Turns power on  
Error Conditions  
2: 4:3  
Not all commands are supported for all projectors. If an unsupported com-  
mand is issued, the command will be ignored. If a command is received that  
is not understood, a ‘?’ character will be returned indicating the command  
was not understood.  
Auto Source  
0: disable  
1: enable  
ASC at RW  
1
Balance  
BAL at RW  
BCG at RW  
BRT at RW  
BSC at RW  
0
100  
100  
160  
2
50  
50  
128  
1
1
2
1
Limitations  
The projector cannot respond to commands coming in at a high-rate. There-  
fore, a delay must occur between commands to ensure that the command  
gets properly executed. To assure the projector can process a command,  
wait 3 seconds before entering the next command.  
Blue Gain  
Brightness  
0
96  
0
Blank Screen  
0: black  
1: blue  
2: white  
The Step column refers to increasing or decreasing the menu bar position  
since the On-screen Display is not an exact match of values. For example,  
Step 2 changes the data by 2 through the CLI (Command Line Interface).  
The menu bar is up (or down) by 1.  
Blank  
0: off  
1: on  
BLK at W  
CEL at RW  
CLR at RW  
0
1
-1  
Ceiling  
0: disable  
1: enable  
0
1
0
Color  
65  
191  
128  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
Com-  
mand  
De-  
fault  
Com-  
mand  
De-  
fault  
Function  
Min  
Max  
Step  
Function  
Min  
Max  
Step  
Contrast  
CON at RW 96  
160  
7
128  
7
1
Effect  
0: blank  
1: mute  
2: aspect ratio  
3: source  
4: auto image  
5: freeze  
EFK at RW  
0
8
7
1
Color Space  
0: RGB  
1: SMPTE240  
2: REC709  
3: REC601  
7: Auto  
CSM at RW  
0
6: zoom  
7: PiP Source  
Green Gain  
GCG at RW  
DKC at RW  
DKH at RW  
DMG at RW  
0
100  
178  
178  
1
50  
2
1
1
1
Horizontal Position  
HPS at RW  
LAN at RW  
def:  
-50  
def: +50 auto  
1
1
Vertical Keystone  
Horizontal Keystone  
78  
78  
0
128  
128  
1
Language  
0 = English  
1 = French  
2 = German  
0
11  
0
Display Messages  
0: disable  
1: enable  
3 = Spanish  
Power-up Source  
0: computer 1  
1: computer 2  
2: video 1  
DSC at RW  
0
5
0
4 = Traditional Chinese  
5 = Japanese  
6 = Korean  
7 = Portuguese  
8 = Russian  
3: video 2  
4: video 3  
5: computer 3  
9 = Norwegian  
10 = Simplified Chinese  
11 = Italian  
Startup Logo  
0: blank screen  
1: default  
DSU at RW  
0
2
1
Time In Hours Last  
Bulb1 Lasted  
LB1 at R  
LB2 at R  
0
0
32766  
32766  
0
0
2: captured  
Time In Hours Last  
Bulb2 Lasted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
Com-  
mand  
De-  
fault  
Com-  
mand  
De-  
fault  
Function  
Min  
Max  
Step  
Function  
Min  
Max  
Step  
Time In Hours Last  
Bulb3 Lasted  
LB3 at R  
0
32766  
0
Menu Navigation  
0: up  
NAV at W  
0
4
-1  
1: down  
4: select  
Lamp Lit  
0: not lit  
1: lit  
LML at R  
0
1
NND  
NND at RW  
0
1
1
0: disable  
1: enable  
Lamp Hours  
LMP at R  
0
0
65534  
32766  
0
0
1
Lamp Reset  
0: not reset  
1: reset  
LMR at RW  
Unit Total Time On  
ONL at R  
0
0
214748  
3646  
0
0
Overscan  
0: disable  
1: enable  
OVS at RW  
1
Lamp Total On Time  
(All Bulbs)  
LMT at R  
0
0
214748  
3646  
Low Power  
0: disable  
1: enable  
LPE at RW  
1
0
0
Presets  
PST at RW  
0
12  
c: 0  
v: 3  
0: presentation  
1: photography  
2: film  
Menu  
0: disable  
1: enable  
MNU at RW  
0
1
3: video  
10: user 1  
11: user 2  
12: user 3  
Phase  
MSS at RW  
MTE at RW  
0
0
31  
1
18  
0
1
1
Power Save  
0: disable  
1: enable  
PSV at RW  
PWR at RW  
RCG at RW  
0
0
0
1
0
Mute  
0: disable  
1: enable  
Power  
0: disable  
1: enable  
1
0
Tracking  
MTS at RW  
def:  
-128  
def:  
+128  
auto  
Red Gain at RW  
100  
50  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
Com-  
mand  
De-  
fault  
Com-  
mand  
De-  
fault  
Function  
Min  
Max  
Step  
Function  
Min  
Max  
Step  
Rear  
0: disable  
1: enable  
REA at RW  
RST at W  
SHP at RW  
0
1
0
Color Temp  
0: 9300K  
1: 6500K  
2: 7200K  
3: User  
TMP at RW  
0
3
2
Factory Reset  
0: not reset  
1: reset  
0
1
-1  
Tint  
TNT at RW  
VOL at RW  
VPS at RW  
114  
0
142  
32  
128  
16  
1
1
1
Sharpness  
126  
130  
128  
1
Volume  
5 = Sharpest  
6 = Sharper  
7 = Standard  
8 = Softer  
Vertical Position  
0
def:  
auto x 2  
auto  
Video Standard  
0: Auto  
VSU at RW  
0
3
0
9 = Softest  
1: NTSC  
2: PAL  
3: SECAM  
Source  
SRC at RW  
0
0
5
5
0
0
0: computer1  
1: computer2  
2: video 1  
3: video 2  
4: video 3  
IR Receiver front  
0: disable  
1: enable  
IRF at RW  
IRR at RW  
IRT at RW  
0
0
0
1
1
1
1
1
1
5: computer 3  
IR Receiver rear  
0: disable  
1: enable  
Screen Save  
SSV at RW  
1
0: 5 minutes  
1: 10 minutes  
2: 15 minutes  
3: 20 minutes  
4: 25 minutes  
5: 30 minutes  
IR Receiver top  
0: disable  
1: enable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
Com-  
mand  
De-  
fault  
Function  
Min  
Max  
Step  
PiP Size Selection  
0: off  
PSS at RW  
0
3
0
1: small  
2: medium  
3: large  
PiP Input  
3: video 2  
1: video 3  
PIN at RW  
PPO at RW  
3
0
4
4
3
2
PiP Position  
0: upper left  
1: upper right  
2: lower left  
3: lower right  
10: user  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
customer service contact information 26  
D
Numerics  
1024x768 resolution 6  
Default gateway 39  
DHCP 39  
A
About 38  
Display Messages 36  
displaying  
computer image 11  
PiP 38  
video image 17  
Drivers 12  
Aspect Ratio 38  
audio 29  
Audio In connector 9, 15  
Auto Image 38  
Auto Power 36  
Autosource 36  
B
Blank 38  
BNC 10, 16  
BNC connectors 16  
Brightness 14  
C
Capture Position 37  
Capture Start 37  
changing the lens 40  
cleaning the dust filter 43  
cleaning the lens 40  
Color 18  
colors are incorrect 24  
component cable connector 15  
computer 10  
USB 13  
Windows 98 13  
dust filter, cleaning 43  
E
Effect Key 38  
elevator foot 14, 17  
Factory Reset 39  
Filter Reset 39  
first time use  
driver installation 12  
focus 14, 18  
Freeze 38  
fuzzy image 22  
I
computer connections  
optional 9  
required 9  
computer image  
image  
display computer 11  
display video 17  
size 8  
optimize 30  
image does not fit screen 23  
image not centered 26  
image not sharp 23  
image not square 23  
image reversed 24  
image size matrix 44  
image upside down 24  
troubleshooting 20  
connector panel 7  
contacting InFocus 26  
Contrast 14, 18  
custom logo  
startup screen 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
Info  
O
network 39  
only startup screen appears 20  
Overscan 35  
P
IP Address 39  
IR Receivers 36  
L
lamp replacement 41  
Lamp Reset 39  
lamp won’t turn on 25  
Language 39  
laptop  
Picture in Picture 38  
Picture menu 33  
PiP 38  
Power button 17  
power cable 9, 15  
Power Save 36  
Power-up Source 36  
presentation features 30  
projection distance 8  
projector  
connecting 9  
external video port 11  
LED 19  
blinking red 25  
solid red 25  
connector panel 7  
customizing 31  
lens  
changing 40  
cleaning 40  
setting up 8  
Logo Capture 37  
Low Power 36  
M
shutdown 19  
troubleshooting problems 19  
projector height 14, 17  
projector positioning 14, 17  
R
Rear 36  
remote 9  
remote control 28  
not working 22  
replacing the lamp 41  
RS-232  
Magnify 38  
Main menu 32  
menu system 32  
Monitor connector 10  
mouse, using your 9  
Mute 38  
N
Network 39  
Network connector 10  
Network Info 39  
NND 36  
cable 10  
connecting 7  
no computer image 21  
no startup screen 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
S
W
security lock 43  
Serial connection 10  
serial connection 7  
Service 39  
Service Code 39  
Settings menu 36  
shutdown  
warranty 26, 57  
Windows 2000 13  
Windows 98 12  
Windows ME, XP 13  
wired 9  
wired remote 9  
X
XGA 6  
Z
zoom 14, 18  
projector 19  
solid red 47  
Source 38  
Source troubleshooting 20  
Sources 36  
Subnet mask 39  
S-video connector 15  
T
Tint 18  
Troubleshooting 20  
troubleshooting 19  
U
USB, using your mouse 9  
V
video 16  
Video button 17  
video connections  
optional 15  
standard 15  
Video connector 15  
video images  
optimizing 31  
Video Standard 35  
volume adjustment 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
Limited Warranty  
WARRANTY LIMITATION AND EXCLUSION  
THIS WARRANTY SETS FORTH INFOCUS’ MAXIMUM LIABILITY FOR ITS  
PRODUCT. THIS WARRANTY EXTENDS ONLY TO PRODUCTS PURCHASED  
FROM INFOCUS OR AN INFOCUS AUTHORIZED RESELLER. InFocus shall have  
no further obligation under the foregoing Limited Warranty if the Product has been  
damaged due to abuse, misuse, neglect, smoke exposure (cigarette or otherwise),  
accident, unusual physical or electrical stress, unauthorized modifications (including  
use of an unauthorized mount), tampering, alterations, or service other than by InFo-  
cus or its authorized agents, causes other than from ordinary use or failure to prop-  
erly use the Product in the application for which said Product was intended.  
InFocus Corporation (“InFocus”) warrants that the Projector (“Product”) purchased  
from InFocus, an InFocus distributor, or an InFocus reseller will conform to the man-  
ufacturer's specifications and be free from defects in material or workmanship for the  
Warranty period provided below. InFocus does not warrant that the Product will  
meet the specific requirements of the end-user customer.  
If the Product, which is the subject of this Limited Warranty, is defective in material or  
workmanship during the warranty period, InFocus, at its option, will REPAIR or  
REPLACE the Product.  
This Warranty excludes Product or accessory cleaning, repair, or replacement of plas-  
tics due to cosmetic damage and damage as a result of normal wear. Product repair  
outside of the terms of the Limited Warranty will be on a time and materials basis.  
Prolonged Product “demonstration” causes unusual Product wear and is not consid-  
ered normal use under the terms of this Limited Warranty.  
All exchanged parts and products replaced under this Warranty will become prop-  
erty of InFocus. InFocus’ sole obligation is to supply (or pay for) all labor necessary to  
repair the Product found to be defective within the Warranty period and to repair or  
replace defective parts with new parts or, at the option of InFocus, serviceable used  
parts that are equivalent or superior to new parts performance.  
The Accessory Warranty covers the accessory item only and excludes normal wear.  
The Lamp Product Warranty excludes expected lamp degradation.  
Limited Warranty Alternatives: Subject to the Limitations, Exclusions and Dis-  
claimers, InFocus Warrants as follows:  
Remanufactured Products and Software Products are exempt from the foregoing  
Limited Warranty. Please refer to the appropriate Remanufactured Product Limited  
Warranty or Software Product Limited Warranty for applicable Warranty informa-  
tion.  
2 Year Parts and Labor Product Warranty - From the date of purchase, InFo-  
cus warrants that the Product will conform to the manufacturers’ specifications  
and be free from defects in material or workmanship for a period of two (2)  
years.  
DISCLAIMER OF UNSTATED WARRANTIES  
1 Year Parts Only Accessory Warranty - From the date of purchase, InFocus  
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO  
THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-  
ING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABIL-  
ITY AND FITNESS FOR PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE  
NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE  
HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE EXTENDED,  
ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY INFO-  
CUS. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG  
AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY  
TO YOU.  
warrants that the customer replaceable and accessory products will conform to the  
manufacturers’ specifications and be free from defects in material or workmanship  
for a period of one (1) year.  
90 Day/500 Hour Replacement Lamp Warranty - Lamp Products purchased  
in projectors or separately as replacements after the original projector purchase is  
Ninety (90) days or 500 hours, whichever comes first. During the Warranty period for the  
Product, InFocus warrants that Replacement lamps, which are purchased at the time of projec-  
tor purchase, will have a 90-day or 500 hour warranty, whichever comes first, from the date  
the spare lamp is put into use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
 
No repair or replacement of Product or part thereof shall extend the Limited War-  
ranty period as to the entire Product. Warranty on the repair part and workmanship  
shall only be effective for a period of ninety (90) days following the repair or replace-  
ment of that part or the remaining period of the Product Limited Warranty whichever  
is greater.  
Limited Warranty Period  
The Limited Warranty period commences on the date of purchase by the end-user  
customer for both the 2 year Product Warranty and the 1 year Accessory Warranty.  
These Limited Warranty provisions shall apply only to the end-user purchaser (first  
person or entity that purchased a new Product for personal or business use and not  
for the purpose of distribution or resale).  
LIMITATION OF LIABILITY  
IT IS UNDERSTOOD AND AGREED THAT INFOCUS’ LIABILITY WHETHER IN  
CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHER-  
WISE SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF THE PUR-  
CHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES  
SHALL INFOCUS BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CON-  
SEQUENTIAL DAMAGES OR LOST PROFITS, LOST REVENUES OR LOST SAV-  
INGS. THE PRICE STATED FOR THE PRODUCTS IS A CONSIDERATION IN  
LIMITING INFOCUS’ LIABILITY.  
To Be Eligible For Limited Warranty Coverage  
Any person exercising a claim under this Limited Warranty must establish to the sat-  
isfaction of InFocus both the date of purchase and that the Product was purchased  
new. The sales receipt or invoice, showing the date of purchase of the Product or  
Accessory is the proof of the date of purchase.  
To Obtain Warranty Service  
During the Limited Warranty period, to exercise this Limited Warranty, the purchaser  
must first contact 1) InFocus, 2) a service facility authorized by InFocus or 3) the place  
of original purchase.  
Limitation on Bringing Action - No action, regardless of form, arising out of the  
agreement to purchase the product may be brought by purchaser more than one year  
after the cause of action has accrued.  
InFocus Customer Service - 1-800-799-9911 or [email protected]  
For Warranty service, the purchaser will be advised to return or deliver the defective  
Product freight and all fees prepaid, to an InFocus Service Center or to a service facil-  
ity authorized by InFocus. When returning Product to InFocus, a Return Material  
Authorization Number (RMA #) is required and must be clearly displayed on the out-  
side of the shipping carton or a similar package affording an equal degree of protec-  
tion. InFocus or the service facility authorized by InFocus will return the repaired/  
replaced Product freight prepaid to the purchaser.  
Governing Law - Any action, regardless of form, arising out of the agreement to  
purchase the product is governed by Oregon law.  
Mandatory Arbitration - Any action, regardless of form, arising out of the agree-  
ment to purchase the product is subject to mandatory arbitration.  
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION  
OR EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES  
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,  
DEPENDING ON JURISDICTION.  
Products returned for Warranty service must be accompanied by a written letter that:  
(i) explains the problem; (ii) provides proof of date of purchase; (iii) provides the  
dealer’s name; and (iv) provides the model and serial number of the Product. Upon  
request of InFocus Corporation or an InFocus authorized repair center receiving the  
Product, proof of legal importation must accompany the warranty repair Product,  
otherwise the Product must be returned to the place of original purchase, to the man-  
ufacturer (Purchaser must bear all tax, duty and freight), or the Purchaser must bear  
charges for the warranty repair.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
IF YOU NEED ASSISTANCE…  
call InFocus Corporation Customer Service directly at 1-800-799-9911.  
SUPPORT IS FREE  
IN EUROPE,  
Many resources are available on  
our website at www.proxima.com.  
Here’s a sample:  
between 6 a.m. and 6 p.m. PST,  
Monday through Friday. Support  
is available in North America  
after hours and weekends for a fee  
at 1-888-592-6800.  
call InFocus Corporation in  
The Netherlands at  
(31) 20 579 2820.  
• product data sheet  
• technical specifications,  
an interactive image size  
calculator, laptop activation  
commands, connector pin outs,  
command line interface (CLI)  
and a glossary  
IN ASIA,  
call InFocus Corporation in  
Singapore at (65) 6334-9005.  
Or, send us an e-mail at  
• online product registration  
Safety Certifications UL, CUL, NOM, IRAM, GOST, C-tick  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DP8400x/  
DP8500x  
InFocus Corporation  
27700B SW Parkway Avenue  
Wilsonville, Oregon 97070-9215  
1-800-294-6400 503-685-8888  
Fax: 503-685-8887  
In Europe:  
InFocus International B.V.  
Strawinskylaan 585  
1077 XX Amsterdam,The Netherlands  
Phone: +31 20 579 2000  
Fax: +31 20 579 2999  
In Asia:  
238A Thomson Road  
#18-01/04 Novena Square  
Singapore 307684  
Telephone: (65) 6334-9005  
Fax: (65) 6333-4525  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Personal Computer PCM 3370 User Manual
Invacare Wheelchair II250 SERIES User Manual
Jet Tools Lathe JML 1014 User Manual
Jet Tools Sander M 708448 User Manual
John Lewis Freezer JLFFW2007 User Manual
JVC CRT Television AV 27D502 User Manual
JVC Flat Panel Television LT 52P789 User Manual
JVC Flat Panel Television LT Z32SX5W User Manual
KiSS Networked Entertainment DVD Player DP 450 User Manual
KitchenAid Ice Maker KUIO18NNVS0 User Manual