TD32/ TD40 PAL
USER’S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Foreword
Caution ...................................................................................................................................... 3
Important Safety Information .................................................................................................. 5
Overviewing your the Monitor
Viewing the Control Panel ...................................................................................................... 9
Viewing the Connecting Panel .......................................................................................................... 10
Viewing the Remote Control
- Key Description .............................................................................................................................. 12
- Teletext / PIP(Picture In Picture) .................................................................................................... 13
- Loading the Batteries ...................................................................................................................... 15
Installation
Table Stand Installation .......................................................................................................... 16
Speaker Installation ................................................................................................................ 17
Connection the Cable/Devices
Connecting the TV Cable ........................................................................................................ 18
Connecting the VCR ................................................................................................................ 19
Connecting the DVD ................................................................................................................ 20
Connecting the Set Top Box .................................................................................................. 21
Connecting the PC [D-Sub & DVI] .......................................................................................... 22
- Displayable Monitor Specification .................................................................................................. 23
Setting the Channel
Basic Operation ........................................................................................................................ 24
OSD Menu Structure ................................................................................................................ 25
Storing Channels Automatically ............................................................................................ 26
Storing Channels Manually .................................................................................................... 28
Fine Tuning the Channel Reception ...................................................................................... 28
Editing the Channels .............................................................................................................. 29
Digest Function ........................................................................................................................ 30
Teletext ...................................................................................................................................... 31
1
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Setting the Picture
Changing the Picture Mode .................................................................................................... 32
Adjusting the User Mode ........................................................................................................ 33
Changing the Color Temperature .......................................................................................... 35
Video NR (Noise Reduction) .................................................................................................. 36
Changing the Screen Format .................................................................................................. 36
Adjusting the PC Screen (Geometry) .................................................................................... 38
Setting the Sound
Adjusting the Sound Balance ................................................................................................ 40
Changing the Sound Mode .................................................................................................... 40
Adjusting User Sound mode .................................................................................................. 41
Spatial Effect ............................................................................................................................ 41
AVC (Auto Volume Control) .................................................................................................... 41
MTS (Multichannel Television Sound) .................................................................................... 42
Setting the Others
Adjusting the Transparency of the OSD Window ................................................................ 43
PIP (Picture In Picture) .......................................................................................................... 43
- Changing the Size in PIP ................................................................................................................ 44
- Choosing the Source in PIP .......................................................................................................... 44
- Picture Swap in PIP ........................................................................................................................ 45
- Changing the Position in PIP .......................................................................................................... 45
Other Advanced Function
- Set ID .............................................................................................................................................. 46
- Setting the Blue Screen Mode ...................................................................................................... 47
- Changing the OSD Language ........................................................................................................ 47
- Front Key Lock in Advance ............................................................................................................ 47
Setting the Time
Setting the Current Time ........................................................................................................ 48
Setting the On Time ................................................................................................................ 48
Setting the Off Time ................................................................................................................ 50
Setting the Sleep Timer .......................................................................................................... 50
Troubleshooting .......................................................................................................................... 51
Warranty Card .............................................................................................................................. 52
2
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
- TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD.
- DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
- SHOCK HAZARD DO NOT OPEN.
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK),
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
This symbol is intended to alert the user to
the presence of important operating and
maintenance(servicing) instructions in the
literature accompanying the appliance.
The stand is intended for use with this monitor only.
Use with other products may result in injury.
WARNING
- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
- This is Class B product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
- To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.
FCC NOTICE
This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in home environment as well as in a
commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and,
if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
Always be careful when using your the Monitor. To reduce the risk of fire, electrical
shock, and other injuries, keep these safety precautions in mind when installing, using,
and maintaining your machine.
Read all safety and operating
instructions before operating
your the Monitor.
Keep the safety and operating
instructions for future reference.
Heed all warnings on the Monitor
and in the operating instructions.
3
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Always be careful when using your the Monitor. To reduce the risk of fire, electrical shock, and other injuries,
keep these safety precautions in mind when installing, using, and maintaining your machine.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a damp cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use the attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
4
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
Follow all operating and use
instructions.
Unplug the Monitor from the
wall outlet before cleaning. Use
a damp cloth; do not use liquid
or aerosol cleaners.
Never add any attachments and/or
equipment without approval of the
manufacturer. Such additions can
increase the risk of fire, electric
shock, or other personal injury.
Do not use the Monitor where contact with or
immersion in water is a possibility, such as
near bath tubs, sinks, washing machines,
swimming pools, etc.
When installing the Monitor on a table, be careful
not to place it too close to the edge of the table.
- This may cause the Monitor to fall, causing serious
injury to a child or adult, and serious damage to the
Monitor.
5
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
Use only the accessory cord designed for this product
Provide ventilation for the Monitor. The unit is designed
with slots in the cabinet for ventilation to protect it from
overheating. Do not block these openings with any object,
and do not place the Monitor on a bed, sofa, rug or other
similar surface. Do not place it near a radiator or heat
register. If you place the Monitor on a rack or bookcase,
ensure that there is adequate ventilation and that you've
followed the manufacturer's instructions for mounting.
to prevent shock. The power supply voltage rating of
this product is AC100-240V, the power cord attached
conforms to the following power supply voltage. Use
only the power cord designated by our dealer to ensure
Safety and EMC.
When it is used by other power supply voltage, power
cable must be changed. Consult your product dealer.
Use only a grounded or polarized outlet. For your safety,
this Monitor is equipped with a polarized alternating
current line plug having one blade wider than the other.
This plug will fit into the power outlet only one way. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still does not fit, contact
your electrician to replace your outlet.
Avoid overhead power lines. An outside antenna
system should not be placed in the vicinity of
overhead power lines or other electric light or power
circuits or where it can fall into such power lines or
circuits. When installing an outside antenna system,
be extremely careful to keep from touching the
power lines or circuits. Contact with such lines can
be fatal.
Unplug the Monitor from the wall outlet and disconnect
the antenna or cable system during a lightning storm
or when left unattended and unused for long periods
of time. This will prevent damage to the unit due to
lightning and power-line surges.
Protect the power cord. Power supply cords should be
routed so that they won't be walked on or pinched by
objects placed on or against them. Pay particular attention
to cords at plugs, convenience receptacles, and the point
where they exit from the unit.
6
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
Do not overload the wall outlet or
extension cords. Overloading can
result in fire or electric shock.
Do not insert anything through the
openings in the unit, where they
can touch dangerous voltage points
or damage parts. Never spill liquid
of any kind on the Monitor.
Bend antenna cable between inside
and outside building to prevent rain
from flowing in.
- This may cause water damaged inside
the Monitor and could give an electric
shock.
Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Do not place an outside antenna in the
vicinity of overhead power lines or other
electric light or power circuits.
There should be enough distance between
an outside antenna and power lines to keep
the former from touching the latter even
when the antenna falls.
- This may cause an electric shock.
- This may cause an electric shock.
Do not attempt to service the Monitor yourself. Refer all servicing to qualified service
personnel. Unplug the unit from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
• when the power-supply cord or plug is damaged
• if liquid has been spilled on the unit or if objects have fallen into the unit
• if the Monitor has been exposed to rain or water
• if the Monitor does not operate normally by following the operating instructions
• if the Monitor has been dropped or the cabinet has been damaged
• when the Monitor exhibits a distinct change in performance
7
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
When replacement parts are
required, be sure the service
technician uses replacement parts
specified by the manufacturer or
those that have the same
characteristics as the original part.
Unauthorized substitutions may
result in additional damage to the
unit.
Upon completion of any service or
repairs to this the Monitor, ask the
service technician to perform safety
checks to determine that the
Monitor is in a safe operating
condition.
If you make adjustments yourself,
adjust only those controls that are
covered by the operating instructions.
Adjusting other controls may result in
damage and will often require
extensive work by a qualified
technician to restore the Monitor to
normal.
Only use the specified batteries.
Do not place anything containing
liquid on top of the Monitor.
In case of smoke or strange smell
from the Monitor, switch it off, unplug
it from the wall outlet and contact
your dealer or service center.
- This may cause damage to the
Monitor or could give an electric
shock.
- This may cause a fire or could give an
electric shock.
- This may cause a fire or could give an
electric shock.
The viewing distance should be
about 5~7 times as long as diagonal
length of the screen.
When moving the Monitor
assembled with speakers do not
carry holding the speakers.
- If not, eyes will strain.
- This may cause the Monitor to fall,
causing serious injury to a child or
adult, and serious damage to the
Monitor.
8
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
OSD Key Position
Front Panel
OSD key & Function
1
2
3
4
5
6
Input Source Select
UP
DOWN (See the box below.)
Power (Stand By)
Remote Sensor.
Status / Power Indicator LED
OSD Key Function
INPUT SELECT
Select the signal source from multiple input sources such as TV, SCART 1, SCART 2, S-Video / AV,
Component1, Component2, PC and DVI.
VOL/CH›ꢁ‚
To change the CHANNEL, Press
‚
key first and change the CHANNEL with
key first and change the VOLUME with
›
,
‚
keys.
To change the VOLUME, Press
›
›,‚ꢀkeys.
Power On /Off
Turn the Monitor on and off.
Accessories
Remote Control Handset
Power Cord
RF Cable
Alkaline Batteries
Owner's Manual
9
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connecting Panel
Back Panel and Jacks
< Back panel of the monitor >
1
2
RS-232C
To control from PC.
DVI
For PC, Set top box.
3
Speakers
PC/DVI Audio Input.
4
D-Sub (PC)
For PC, Set top box.
5
Component 1, 2
Component Sound
Speakers
For DVD, Set top box.
6
For Component Audio Input.
To connect speakers (2CH, Stereo)
For VCR, DVD, Set top box.
For VCR, DVD, Set top box.
For DVD, Set top box, S-VHS.
To connect other TV or monitor.
For VCR, DVD, Set top box.
For TV antenna cable. (Air)
7
SCART 1 (Euro connector)
SCART 2 (Euro connector)
S-Video
8
9
10
11
12
13
14
15
AV Output
AV Input
TV Antenna
AC Power
DC 5V OUTPUT
• Refer to the next page for port descriptions.
10
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connecting Panel
1
2
4
RS-232C Jack
Connects a control signal from a PC.
DVI INPUT JACK
Connects a digital video signal from a DVI output jack of PC or Set Top box.
RGB PC INPUT JACK ( D-SUB )
Connects a video signal from a video output jack of PC.
Cables connecting the PC vary according to the type of machine, so contact your product dealer.
5
COMPONENT INPUT JACK 1, 2
Connects a three separate component video signal from a component output jack of a DVD player
or Set Top box.
Supports 480i/60Hz, 480p/60Hz, 576i/50Hz, 576p/50Hz, 720p/60Hz, 1080i/50Hz,1080i/60Hz signals.
(i: interlace, p: progressive)
6
7
COMPONENT SOUND
Connects a sound signal from component.
SCART ( EURO CONNECTOR) JACK 1, 2
- SCART 1: Half SCART (CVBS only input / output ).
- SCART 2: Full SCART (CVBS & RGB input / output ).
Connects a SCART (euro cable) signal from a VCR, DVD player, or Set Top Box.
9
S-VIDEO INPUT JACK
Connects a S-Video video signals from a S-Video output jack of a S-VHS, VCR or DVD player.
10
11
COMPOSITE (RCA) OUTPUT JACK
Output the signal of the current screen of the Monitor. Connects to other TV or monitor.
COMPOSITE (RCA) INPUT JACK
Connects an AV composite video signal from a composite output terminal of a VCR or DVD player.
Unavailable when a S-Video cable is put into the S-Video input jack.
ANT. IN (TV ANTENNA JACK)
Connects to an TV antenna cable.
12
13
AC (POWER) INPUT JACK
Firmly insert the accessory power cord as far as it will go into the power input terminal.
Firmly push the power cord plug as far as it will go into the power socket.
Connectors
RS-232C Configurations
RCA Pin Jack
AUDIO INPUT
3-Wire (Non-standard)
21 Pin Euro AV (SCART)
21 Pin Euro AV (SCART)
Mini Din 4 Pin
VIDEO INPUT
VIDEO INPUT
PC the monitor
S-VIDEO INPUT
RCA Pin Jack
COMPONENT VIDEO INPUT
ANALOG RGB INPUT
DIGITAL VIDEO INPUT
2
3
5
4
6
7
8
3
2
5
4
6
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DTR
DSR
RTS
CTS
Mini D-Sub 15pin
DVI-D 24 pin
• Cables connecting the PC vary according to the
type of machine, so consult your product dealer.
11
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
Key Description
1
2
3
Power
Turn the Monitor on and off.
Mute
Temporarily cut the sound and restore it.
Pre PG
Turn to the previous program or exit OSD.
V.Size
4
Choose the Screen Format.
Wide ➔ Panorama ➔ Zoom1 ➔ Zoom2 ➔ 4:3
5
6
FAVORITE (FAVOURITE)
Tune to your next favorite program.
TEXT
Teletext on / off.
TTX ➔ TTX/MIX ➔ Normal (TTX off)
7
8
INPUT
Display the input source list.
Menu / Set
Display the main OSD menu.
Activate your choice in the OSD menu.
9
Back
Return to the previous OSD menu.
10
PG+
Move to the upper program.
11
12
13
PG-
Move to the lower program.
VOL+
Increase the volume level.
VOL-
Decrease the volume level.
12
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connecting Panel
MTS
1
Choose the MTS (Stereo) mode. Each time it is
pressed, different mode is selected.
Mono ➔ Stereo ➔ Language A ➔ Language B ➔
Language AB
• You can select only available modes depending on
the source.
2
3
PG INFO
Display the current information about time, Screen
Format, source and MTS mode.
PICTURE
There are 4 picture modes.
Standard ➔ Vivid ➔ Mild ➔ User
STILL
4
5
Temporarily freeze the screen and restore it.
SOUND
Choose the sound equalizer settings.
Standard ➔ Movie ➔ Music ➔ News ➔ User
6
SLEEP
2
1
3
4
Set the preset time interval for automatic turn-off.
OFF ➔ 10 ➔ 20 ➔ 30 ➔ 60 ➔ 90 ➔120 ➔ 150
➔ 180
7
8
TIME
6
5
7
8
Display the current time on the screen.
DIGEST
9
12
11
Display 15 TV programs at the same time.
10
13
14
16
15
TTX / program Edit keys
PIP (Picture In Picture) Keys
9
ERASE
13
MODE (On / Off)
Erase the current program.
Activate PIP function and change the PIP
window size and PIP mode.
Small ➔ Large ➔ Twin (Half) ➔ OFF
10
SKIP
Make the program skipped.
14
15
16
SOURCE
Change the PIP window source.
11 INSERT
Add the current program.
SWAP
12
REPLACE
Swap the main screen and the PIP window.
Replace the selected program with the
current program.
MOVE
• See 34 page.
Move the position of the PIP window.
• These keys are the colour keys in TTX also.
13
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
Move key : Move the position of PIP window.
Left Up
Right Up(Start)
Left Down
Right Down
Swap key : Swap the sources of the main screen and
PIP window.
MODE KEY : Change the PIP window mode.
OFF ➔ SMALL ➔ LARGE ➔ TWIN
SMALL
LARGE
TWIN
Source key : Change the source of the PIP window. The available sources are shown as below.
Main
TV
SCART1 SCART1 S-Video/AV Component1 Component2
PC
DVI
PIP
TV
–
SCART
SCART 2
S-Video
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Component1
Component2
PC
DVI
14
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
Loading the Batteries
1
3
2
Load two AAA batteries, taking
care that the + and - ends face
the correct direction.
Close the cover until it
clicks.
Press on the cover and slide
in the direction of the arrow.
Reception range of remote control
15
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Table Stand Installation (optional)
< The Monitor can be installed on the desk as shown above. >
• Table Stand mount minimum allowable clearances for adequate ventilation.
1.18 inch
(3Cm)
4 inch(10.16Cm)
4 inch
(10.16Cm)
4 inch
(10.16Cm)
2.36 inch
(5.99Cm)
Installation
16
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Speaker Installation (optional)
• Be sure monitor power is turned off before making any connections.
Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect
the positive "+" wire to the "+" input and the negative "-" wire to the "-" input. Connect left monitor input to left speaker
and right monitor input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders
provided. (Caution: Once installed, the speaker wire holders lock into position and can't be removed.)
• Always lift the monitor itself (not the speakers) when handling or moving the monitor after speakers have been
installed.
Speaker Accessories
8-4 x 16 Long Bolts
8-4 x 8 Short Bolts
2-Speaker Wires
4-Iron Plates
(Attach iron plates to speakers)
(Attach iron plates to monitor)
(Mount speakers to monitor)
17
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV Cable
Connecting the TV Cable
Connect the TV Antenna cable to the TV input jack. Press INPUT button on the remote control and
select TV on OSD.
1
Use PG+, PG- button or numeric button to change TV program for your program selection.
Press Pre PG button on the remote control to tune the previous program.
2
3
4
Also, you can tune to cable service provided programs using the cable box. For further information regard-
ing cable TV service, contact cable TV service provider(s).
18
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the VCR
Connecting the VCR
With SCART (Euro cable)
Connect a SCART cable to the SCART jacks of the VCR and the Monitor.
With S-Video
Connect a S-Video cable to the S-Video jacks of the VCR and the Monitor.
Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the Monitor.
With AV input
Connect a composite cable to the AV video jacks of the VCR and the Monitor.
Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the Monitor.
Watching VCR
Press INPUT button on the remote control and select Video Sources.
Insert a video tape into the VCR and press the PLAY key on the VCR.
1
2
• To avoid picture noise (interference), leave an adequate distance(over 3m) between the VCR and monitor.
• When connecting the Monitor with external equipment, match the colour of connecting ports(e.g. Video -yellow,
Audio(L) -white, Audio(R) - red).
• If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Monitor.
• If you connect an S-VHS VCR to the S-VIDEO input socket, you can get a better picture quality than normal video
input (AV).
19
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD
Connecting the DVD
• Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the
Component jacks on the Monitor.
• Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio
jacks beside the Component jacks on the Monitor.
Supported Signals for Component ports
How to use
Component1
Component2
480i / 60Hz
480p / 60Hz
576i / 50Hz
576p / 50Hz
720p / 50Hz
720p / 60Hz
1080i / 50Hz
1080i / 60Hz
Turn on the DVD player.
1
2
Press INPUT button on the remote control of the
Monitor and select Component1 or Component2.
Component Input ports
Component ports of the
Monitor
Y
PB
PR
You can get better picture quality if you connect
DVD player with component input sockets as below.
Pb
B-Y
Db
PB
Pr
R-Y
Cr
Y
Y
Y
Y
Video output ports of
DVD player
PR
• Normal DVD source is based on 480i, which should be through normal YPbPr of Component signal.
• Component, PC, DVI ports can be displayed only 1 signal among them. If one of them is being displayed, other ports
are unavailable.
20
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Set Top Box
How to connect
Connect Set Top Box video inputs to SCART, COMPONENT, PC or DVI jacks on the Monitor. Audio inputs
to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
Supported Signals
How to use
Component1
Component2
PC
DVI
480i/60Hz
480p/60Hz
576i/50Hz
576p/50Hz
720p/50Hz
720p/60Hz
1080i/50Hz
1080i/60Hz
Turn on the Set Top Box.
1
2
Press INPUT button on the remote
control of the Monitor and select
Component1, Component2, PC
or DVI.
How to connect
With SCART (Euro cable)
Connect a SCART cable to the SCART jacks of the
STB and the Monitor.
With Component
Connect a three separate component cables to the
component jacks of the STB and the Monitor.
Connect L (White) and R (Red) sound cables (composite)
to the sound jacks of the STB and the Monitor.
With RGB or DVI
Connect a D-Sub or DVI cable to the AV video jacks of
the STB and the Monitor.
Connect L (White) and R (Red) sound cables (composite)
to the sound jacks of the STB and the Monitor.
• Component, PC and DVI ports can be displayed
only 1 signal among them. If one of them is
bong displayed, other sockets are unavailable.
21
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the PC[D-Sub & DVI]
Connecting a PC to the Monitor
Connect a PC (15pin) video cable between the
Video Output port on the PC and the PC port
on the Monitor.
Pin No.
Description
Red (R)
Green (G)
1
2
Pin Configuration
3
Blue (B)
15Pin Signal Cable (based on protruded pin)
Grounding
4
Grounding (DDC)
Red (R) Grounding
Green (G) Grounding
Blue (B) Grounding
Reserved
5
6
Pin Configuration
7
8
1
Turn on the Monitor and press INPUT button
to select the PC MODE.
9
Sync Grounding
Grounding
10
11
12
13
14
15
2
Turn on the PC and check for the PC
require ment.
Data (DDC)
Horizontal sync.
Vertical sync.
Clock (DDC)
3
Adjust the PC screen in Geometry menu.
(See 43 page.)
22
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Displayable Monitor Specification
Resolution
Horizontal Frequency (KHz)
31.468
Vertical Frequency (Hz)
70.09
640 x 350
85.08
37.861
31.469
70.08
640 x 400
37.927
85.03
31.469
59.94
35.000
66.66
72.80
37.861
75.00
37.500
640 x 480
85.00
43.269
90.03
45.913
100.04
120.000
56.25
53.011
64.062
35.156
37.879
60.31
48.077
72.18
800 x 600
46.875
75.00
53.674
85.06
56.000
90.00
64.016
100.00
74.55
832 x 624
852 x 480
49.725
31.468
60.05
48.363
60.00
1024 x 768
56.476
70.06
60.023
75.02
1280 x 768
47.700
60.00
64.000
60.00
1280 x 1024
• Synchronization input form : separate
• Depending on the manufacturer, your PC screen might
appear differently (and depending on your particular
version of Windows).
• The the Monitor recognizes 640x480@60Hz signal as
480p DTV signal. So the signal is expanded, please
try other signals like 640x480@75Hz.
Check your PC instruction book for information about
connecting your PC to a the monitor.
•
The the Monitoroperates abnormally if a non-standard
video format is selected.
• The the Monitor may operate abnormally if a non-standard
video signal.
• 1280 X 768 : 40" Native Resolution Horizontal
Polarity is Positive(+)Vertical Polarity is Negative(-)
• "Out of range" message box will appear when an
over-spec video signal is input. Change the video settings
of PC when the message is displayed.
23
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turning the Monitor On And Off
Press the Power button on the remote control. The the Monitorwill turn on and you will be ready to use its
features. You can also use the Power key on the front panel.
Select Source
Press INPUT button on the remote control. Then you can see the source list menu shown as below.
Source Change
1 TV
2 SCART 1
3 SCART 2
Select the source to watch with PG+ / PG- button on
the remote control and press the Menu / Set button.
4 S-VIDEO /AV
5 COMPONENT 1
6 COMPONENT 2
7 PC
8 DVI
Source list menu
TV program Selection
Connect the signal source (TV antenna) to TV input. Press INPUT button on the remote control
and select TV on the source list.
1
2
3
4
Use PG+, PG- button or numeric button to change TV program you want.
Press Pre PG button on the remote control to watch the previous program.
Also, you can tune the cable service, provided programs while using the cable box.
For further information regarding cable TV service, contact your TV service provider(s).
Volume Control
Use VOL+ / VOL- button on the remote control to adjust the volume level.
Press MUTE button on the remote control when you need to cut the sound temporarily.
24
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menu Structure
• OSD (On Screen Display) allows users to control or adjust various features and settings in accordance
with his/her preferences.
• Press the Menu/Set button on the remote control to see the main OSD menu.
EXAMPLE of OSD Menu
Picture
Mode
Standard
Normal
ON
Temperature
Video NR
Film Mode
Screen Format
OFF
Wide
1
Main Menu
Press Menu / Set key on the remote control to enter the main OSD menu.
First, select Main menu item you need with PG+ & PG- key.
To select a main menu items, just press VOL+ or Menu/Set button on the Remote Control.
2
3
Sub Menu
Each menu item has its own sub menu items to set.
Sub Menu items
A : If there is no ¥Šꢀpart, the item has an sub menu.
You can enter the sub menu and adjust an item you need.
Select sub-menu item with PG+ / PG- button on the remote control and press VOL+ or
Menu/Set button to enter the submenu.
B : If there is a ¥Šꢀpart, you can set the item by selecting ¥Š. Ex) ¥ꢀON Š or ¥ꢀOFF Š
Press VOL+ or Menu/Set button to set a ¥Šꢀpart, and adjust it with PG+ / PG- key.
25
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel
Auto Scan
You can now search for and store the TV channels in two different ways : using Auto Scan or Manual Scan.
Auto Scan
Press Menu/set button to display the main OSD menu.
Select the TV Main menu.
1
2
3
4
Auto Scan
Manual Scan
Press Menu/Set to enter the sub menu.
Fine Tune
Edit
Select Auto Scan with PG+/PG- keys and press
Menu/Set key on the remote control.
Then there will appear the Auto Scan sub menu.
5
Select your country. Then the tuning bar will appear.
The scanning will start.
Belgium
Czech Rep
Denmark
Detchland
Espana
The supported countries are shown as below.
Belgium
Czech Rep
Denmark
Germany
England
Spain
Poland
Sweden
Turkey
Switzerland
East Europe
Others
Finland
Finland
France
Great Britain
Greece
Auto Scan
16
Hungary
Ireland
Italy
Netherlands
Norway
Auto Scan for other countries, please refer to the next page.
• You can enter the TV menu in TV mode only. (When you watch a TV program.)
26
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel
Auto Scan (Other Countries)
Asia
Selection
Others
Nation
Malaysia
Pakistan
Singapore
Selection
Others
Nation
Israel
Others
Others
Kuwait
Arab Emirates
Others
Others
Others
Others
Czech Republic
Iran
China
Saudi Arabia
Europe
Nation
Albania
Andorra
Croatia
Iceland
Selection
Others
Nation
Estonian
Georgia
Latvia
Selection
Hungary
Hungary
Others
Hungary
Hungary
Hungary
Hungary
Poland
Others
Others
Lithuania
Russian Fed.
Ukraine
Others
Macedonia
Portugal
Armenia
Azerbaijan
Belarus
Spain
Hungary
Hungary
Hungary
Hungary
Romania
Greece
Slovakia
Luxembourg
Monaco
Netherlands
France
Bulgaria
27
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel
Manual Scan
1
2
Press Menu/set button on the remote control to display the main OSD menu.
Select the TV main menu with PG+ / PG- button on the
remote control.
Auto Scan
3
4
Press Menu/Set button to enter the sub menu.
Manual Scan
Fine Tune
Edit
Select Manual Scan with PG+ / PG- button and press
Menu/Set button.
5
Then you can see the tuning bar. the Monitorwill scan from
channels to the current channel.
Manual Scan
:Move
VHF
16
Menu/Set : EXIT
• Only scanned programs can be stored as Favorite programs.
Fine Tune
The Fine Tuning function lets you manually adjust the Monitor's tuner if you have difficulty tuning analog Channels.
1
Press Menu/set button to display the main OSD menu.
Select the TV main menu.
Auto Scan
2
3
Manual Scan
Press Menu/Set to enter the Fine tune sub menu.
Fine Tune
Edit
Select Fine Tune with PG+ / PG- button and press
Menu/Set button. Then you can see the adjust bar.
4
5
Adjust the fine tune with VOL+ or VOL- button.
Fine Tune
:Move
16
Menu/Set : EXIT
28
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel
Edit
Edit Favorite program List
You can store of your favorite channels for each available input source (such as TV or CATV).
Then, when you press the FAVORITE button on the remote control, the Monitor display only the favorite
channels you previously stored, allowing you to quickly and easily find frequently wanted channels.
Press Menu/set button to display the main OSD menu.
Select the TV main menu.
1
2
3
4
Auto Scan
Manual Scan
Press Menu/Set to enter the TV sub menu.
Fine Tune
Edit
Select Edit and press the Menu/Set button.
Then you can see the Favorite program List.
You can select a program with PG+ / Pg button
on the remote control.
5
Pr Name
gg Kljwef
CH Picture Sound
69 SECAM D/K
Skip FAV
TO EDIT THE LIST
No
Yes
You can INSERT, ERASE, SKIP and REPLACE the
programs in the list. Refer to the picture of the remote
control below.
1
2
3
4
5
6
7
KGBMS
KGBMS
KGBMS
KGBMS
KGBMS
KGBMS
KGBMS
21 AUTO
21 AUTO
21 AUTO
21 AUTO
21 AUTO
21 AUTO
21 AUTO
AUTO
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
TO EDIT THE PROGRAM IN THE LIST
If you want to edit a program, press Menu/Set button.
Then you can select a field with VOL+/VOL- button.
Press Menu/Set button on the field to edit. Adjust the field
with PG+/PG- button. To return, press BACK button.
Move
1
ERASE
Erase the selected program from the list.
2
4
SKIP
Make the selected program will be skipped.
INSERT
Insert new list item.
5
REPLACE
Replace the selected program with the Current
programs that you're watching.
• Only scanned channels can be set as Favorite Channels.
29
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Digest Function
Digest
In the Digest function, you can watch 15 programs at the same time. (This function works only in TV mode)
1
2
Press the Digest button on the Remote Control.
By pressing the channel number, the selected channel
becomes main window.
You can make off the Digest Function by pressing
Digest button again.
3
30
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
Teletext On / Mix / Off
You can switch on and off teletext function by pressing TEXT button on remote control.
TOP text
The user guide displays four fields - red, green, yellow and blue - at the bottom of the screen.
The yellow field denotes the next group and the blue field denotes next block.
Block / Group / Page Selection
- With the blue button you can move block to block
- Use the yellow button to proceed to the next group with automatic overflow to the next group.
- With the green button, you can go to the next exiting page. (Use PG+ button as alternate).
- With the red button, you can go to the previous page.(Use PG- button as alternate)
You can go to the page by pressing the NUMBER button on the remote control.
FASTEXT
The teletext pages are color coded along the bottom of the screen and are selected by pressing the
corresponding colored button. Press index key to select the index page. You can go to a page by
pressing the NUMBER button on remote control. You can move a page by pressing PG+ or PG-
button to select the page you want to see.
31
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture
Mode
Your the Monitorhas 3 automatic factory preset picture settings ("Standard", "Vivid" and "Mild"). You can choose
Standard, Vivid or Mild by pressing "Picture" key on the remote control (or by making a selection from the
menu). Or you can select User which automatically recalls your personalized picture settings.
Press Menu/set button to display the main OSD menu.
Select the picture main menu.
1
2
Mode
Standard
Normal
ON
Temperature
Video NR
Press Menu/Set to enter the sub menu.
3
4
Select Mode and press Menu/Set to enter the sub
menu. Then the picture sub mode appear.
Film Mode
Screen Format
OFF
Wide
5
6
Select the picture mode and press Menu/Set button.
You will see the picture setting bars.
Just Press BACK button on the remote control.
You can adjust each values of the picture setting,
but the changed values are stored as in User mode.
Standard
Vivid
USER mode has additional settings
in a sub-menu: See next page.
Mild
User
Contrast
Brightness
Color
Sharpness
Recall
• Alternative method : Just press the "Picture" button on the remote control. Each time it is pressed, different mode
is selected.
32
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture
Adjust User Mode
You can change the Contrast, Brightness, Color, and Sharpness according to personal preference in User
mode.
1
2
3
4
Select the item to adjust with PG-, PG+ button.
Press Menu/Set button.
Select User mode (Previous page)
Adjust the item with VOL-, VOL+ button.
Contrast
Brightness
Color
To cancel all adjust, select Recall and press
Menu/Set button.
For a more detailed description of
these settings, see the next page."
Sharpness
Recall
33
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture
CONTRAST
Adjust brightness difference between
bright part of the screen and dark part.
Distinct
Vague
BRIGHTNESS
Adjust brightness of the screen.
Dark
Bright
COLOR
Adjust deep and light color of the screen.
Decrease
Increase
SHARPNESS
Adjust vividness of the screen.
Less sharp
Sharp
34
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture
Temperature
Your the Monitorhas 5 screen temperatures (color settings):
1
2
3
4
Press Menu/set button to display the main OSD menu.
Select the picture main menu.
Mode
Standard
Normal
ON
Temperature
Video NR
Press Menu/Set to enter the picture menu.
Select Temperature and press Menu/Set to enter
the sub menu.
Then the Picture-Temperature sub menu appear.
Film Mode
Screen Format
OFF
Wide
5
6
Select the Temperature mode with PG- / PG+
button and press Menu/Set button.
Press BACK button to return.
Cool2
Cool1
Normal
Warm1
Warm2
Cool 1, 2
Screen seems cool: Strong Blue
Normal
Normal: Factory default.
Warm 1, 2
Screen seems warm: Strong Red
35
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picutre
Video NR
This function automatically filters out and reduces the image noise and improves picture quality when receiving
weak signals.
Press Menu/Set button to display the main OSD
menu.
1
Mode
Standard
Normal
OFF
Temperature
Video NR
Select the picture main menu item.
2
3
Press Menu/Set to enter the sub menu.
Film Mode
Screen Format
OFF
Select Video NR and press VOL+ button to enter
the ¥Šꢀparts. Then the cursor moves into the
¥Šꢀparts.
4
Wide
5
Turn on or off Video NR function with PG+/PG-
button and press BACK button.
Mode
Standard
Normal
ON
Temperature
Video NR
Film Mode
Screen Format
OFF
Wide
Screen Format
Your the Monitor has four Screen Formats: Wide, PANORAMA, ZOOM1, ZOOM2, 4:3.
(For more detail description for these modes, refer to the next page.)
Press Menu/Set button to display the main OSD menu.
Select the picture main menu.
1
2
3
4
Mode
Standard
Normal
ON
Temperature
Video NR
Press Menu/Set to enter the picture menu.
Select Screen Format and press Menu/Set to
enter the sub menu. Then the Screen Format
sub menu appear.
Film Mode
Screen Format
OFF
Wide
Select the Screen Format you want and press
Menu/Set button
5
Wide
Panorama
Zoom1
Zoom2
4 : 3
36
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture
Screen Format Description
Wide
Wide video: No change.
4:3 video: Expands 4:3 video signal horizontally to fit the
Wide screen.
Panorama
Wide video: No change.
4:3 video: Expands 4:3 video horizontally to fit the Wide
screen and to minimize distortion, sides are expanded
more than center.
Zoom 1
Expands Wide mode screen vertically.
Zoom 2
Expands zoom 1 mode screen vertically.
4:3
Wide video: The image is suppressed.
4:3 video: No expansion. There are gray areas besides
the image.
37
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture [PC]
In PC mode, you can adjust the H, V-Position, Native Mode and Phase. Also you can adjust them automatically.
Geometry
You can change H, V-Position, Native Mode in PC mode like usual PC monitors.
You can also adjust them automatically. (Auto adjust function.)
1
2
3
4
Press Menu/set button to display the main OSD menu.
Select the picture main menu with PG+, PG- button.
Press Menu/Set to enter the sub menu.
Mode
Standard
Normal
Temperature
Geometry
Select Geometry and press Menu/Set to enter the
sub menu. Then the picture Geometry sub menu
will appear.
Select the item to adjust with PG-, PG+ button.
Press Menu/Set button.
1
2
3
H-Position
V-Position
Phase
Then the cursor moves on the bar and you can
adjust the value with VOL-, VOL+ button.
Native Mode
Auto Adjust
ON
4
To adjust these items, automatically, select
Auto Adjust and press Menu/Set button.
For more detail description refer to the next page.
38
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Picture [PC]
H-POSITION
V-POSITION
PHASE
Mismatch
Match
39
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sound
In SOUND Menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select the
equalizer settings.
Balance
This control allows you to adjust the balance of the left and right speaker output.
Press Menu/set button to display the main OSD menu.
Select the SOUND main menu.
1
2
3
4
Balance
Sound Mode
Spatial Effect
AVC
User
Press Menu/Set to enter the sub menu.
Select Balance and press Menu/Set button.
OFF
OFF
Adjust the Balance with VOL-, VOL+ button and
press Menu/Set button.
5
MTS
Stereo
Sound Mode
Your the Monitor has four automatic sound settings ("Standard", "Movie", "Music" and "News") that are preset
at the factory. You can activate either Standard, Movie, Music or News by pressing "SOUND" on the
remote control (or by making a selection from the menu) or you can select "Custom" which automatically
recalls your personalized sound settings.
Balance
Press Menu/set button to display the main OSD
menu.
1
Sound Mode
Spatial Effect
AVC
User
Select the SOUND main menu.
2
3
4
OFF
OFF
Press Menu/Set button to enter the sub menu.
MTS
Stereo
Select Sound Mode and press Menu/Set Button
to enter the sub menu. Then the Mode sub menu
appear.
Standard
Movie
Music
News
5
6
Select the Equalizer setting and press Menu/Set
button.
You will see the Equalizer bars. Just press BACK
button on the remote control. You can adjust each
values of Equalizer, but the changed values are
stored as in User mode.
User
Equalizer
User mode require more settings.
It has sub menu: See next page.
0.1
0.5
1.5
5.0
10.0kHz
40
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sound
User Adjust
You can use the OSD menu to change the Treble, Bass, Balance and DRC according to your preference.
1
2
Equalizer menu appear when you select User mode.
Select User mode (Previous page)
Select a gain bar with VOL+, VOL button on the
remote control and adjust it with PG+ / PG- button.
3
Press BACK or BACK button on the remote control
to exit Equalizer. The result will be saved automatically.
Equalizer
0.1
0.5
1.5
5.0
10.0kHz
Spatial Effect
This function can create surround effect such as the sound seems to come from all directions.
Press Menu/set button to display the main OSD menu.
1
2
Balance
Sound Mode
Spatial Effect
AVC
Select the SOUND main menu item with PG+/PG-
button.
User
OFF
OFF
3
4
5
Press Menu/Set to enter the sub menu.
Select Spatial Effect and press VOL+ button.
MTS
Stereo
Turn on or off Spatial Effect function with PG+/PG-
button and press Menu/Set button.
AVC (Auto Volume Control)
This function adjust sound volume level automatically depending on the source.
1
2
3
Press Menu/set button to display the main OSD menu.
Select the SOUND main menu.
Balance
Sound Mode
Spatial Effect
AVC
User
OFF
Press Menu/Set to enter the sub menu.
4
5
Select AVC and press VOL+ button to enter the ¥Š
parts. Then the cursor moves into the ¥Šꢀparts.
OFF
MTS
Stereo
Turn on or off AVC function with PG+/PG button and
press BACK button.
41
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sound
MTS
Multichannel Telersion Sound
Select sound signal format from the input source. There are Mono, Stereo, Language A, Language B,
Language AB sound formats.
Press Menu/set button to display the main OSD
menu.
1
2
Balance
Sound Mode
Spatial Effect
AVC
User
Select the SOUND main menu with PG+ / PG-
button on the remote control.
OFF
Press Menu/Set to enter the sub menu.
3
4
OFF
Select MTS and press Menu/Set to enter the sub
MTS
Stereo
menu. Then the MTS sub menu appear.
5
Select the MTS format with PG+ / PG- and press
Menu/Set button.
Mono
The available sound formats are displayed.
Usually, you can see Mono and Stereo.
Stereo
Language A
Language B
Language AB
• NICAM : A Digital stereo sound format for analog TV from BBC. If a channel transmit NICAM sound signal, you can
hear high quality digital stereo sound.
The the Monitor recognize NICAM automatically.
42
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Others
In SET UP menu, you can adjust the transparency of the OSD menu and set PIP and others.
Translucent
Adjust the transparency of the OSD menu. There are 8 step from OFF to 7.
1
2
Press Menu/set button to display the main OSD menu.
Translucent
PIP
OFF
Select the SET UP main menu with PG+ / PG-
button on the remote control.
3
4
Press Menu/Set button to enter the sub menu.
Advanced
Select Translucent and press VOL+ button to enter
the ¥Šꢀparts. Then the cursor moves into the
¥Šꢀparts.
5
Adjust with PG+ & PG- button and press EXIT button.
PIP (Picture In Picture)
You can watch two programs or sources at the same time. And set up PIP size and position.
1
2
Press Menu/set button to display the main OSD
menu.
Translucent
PIP
OFF
Select the SET UP main menu with PG+ / PG-
button on the remote control.
3
4
Press Menu/Set button to enter the sub menu.
Advanced
Select PIP and press Menu/Set button to enter the
sub menu. Then the PIP sub menu appear.
PIP Window
Size
SMALL
Source
Picture Swap
Position
43
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Others
Size in PIP (Picture In Picture )
Change the size of the PIP window. There are 3 sizes: SMALL, Large, Twin.
1
2
Select Size and press VOL+ button to enter the ¥Šꢀparts. Then the cursor moves into the parts.
Adjust size function with PG+ & PG- button and press Menu/Set button.
SMALL
LARGE
TWIN
Source in PIP
Change the source of the PIP window.
1
2
Select Source and press Menu/Set to enter the sub
menu. Then the PIP sub menu appear.
Size
SMALL
Source
The available sources will be displayed.
Select the source and press Menu/Set button.
Picture Swap
Position
TV
SCART1
SCART2
S-Video/AV
This picture is an example.
The displayed sources may be
different depending on the
main input source.
44
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Others
Main
TV
SCART1 SCART2 S-Video/AV Component1 Component2
PC
DVI
PIP
TV
SCART
SCART 2
S-Video
Component1
Component2
PC
DVI
Picture Swap in PIP (Picture In Picture)
Swap the sources of the main screen and the PIP window.
Select Picture Swap and press Menu/Set button.
Position in PIP
Change the position of the PIP window.
1
2
Select Position with PG+ / PG- button on the
remote control and press Menu/Set to enter the
sub menu. Then the PIP sub menu appear.
Size
SMALL
Source
In Sub Menu, there are four positions.
Select the position with PG+ / PG- button on the
remote control and press BACK button
Picture Swap
Position
Right Down
Right Up
Left Up
Left Down
45
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Others
Advanced
You can se up ID, Blue Back, Language and Front key Lock in Advanced Menu.
Press Menu/set button to display the main OSD menu.
1
2
Translucent
PIP
OFF
Select the SET UP main menu with PG+ / PG-
button on the remote control.
3
4
Press Menu/Set to enter the sub menu.
Advanced
Select Advanced and press Menu/Set to enter the
Advanced menu. Then the PIP sub menu appear.
Set ID
99
OFF
Blue Back
Language
Front key Lock
ENGLISH
OFF
Set ID in Advanced
Set the ID of the Monitor for mass-controlling through the serial port.
1
2
Select Set ID and press VOL+ button to enter the
¥Šꢀpart. Then the cursor moves into the ¥Šꢀpart.
Set ID
99
OFF
Blue Back
Language
Front key Lock
Adjust with PG+ / PG- button and press BACK button.
ENGLISH
OFF
46
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Others
Blue Back in Advanced
You can set to display blue-color screen instead of noise screen.
Select Blue Back and press VOL+ button to enter
the ¥Šꢀparts. Then the cursor moves into the
¥Šꢀparts.
1
2
Set ID
99
OFF
Blue Back
Language
Front key Lock
ENGLISH
OFF
Turn the function on or off with PG+ / PG- button
and press BACK button.
Language in Advanced
Set the language to use in OSD.
Supported languages are English, French, German, Spanish, Italian, Chinese, Russian.
Select Language and press VOL+ button to enter
the ¥Šꢀparts. Then the cursor moves into the
¥Šꢀparts.
1
2
Set ID
99
OFF
Blue Back
Language
Front key Lock
ENGLISH
OFF
Choose the Language with PG+ / PG- button and
press BACK button.
Front key Lock in Advanced
Lock the OSD panel of the Monitor. It can protect the Monitor from children's power on/off or other
operation by miss.
Select Front key Lock and press VOL+ button to enter
the ¥Šꢀparts. Then the cursor moves into the
¥Šꢀparts.
1
2
Set ID
99
OFF
Blue Back
Language
Front key Lock
ENGLISH
OFF
Turn the function on or off with PG+ / PG- button and
press BACK button
47
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time
In the TIME menu, you can set the current time and auto power on / off.
Time Set
Set the current time.
Press Menu/set button to display the main OSD
menu.
1
Time set
On Time
On Channel
On Volume
Off Time
Sleep
AM 03:29
AM 05:11 ON
99
Select the TIME main menu.
2
3
4
5
Press Menu/Set to enter the sub menu.
Select Time Set by pressing VOL+ button.
100
AM 05:11 OFF
OFF
Move the cursor by pressing VOL-, VOL+ button
and adjust time by PG+, PG- button.
On Time
This the Monitor can be set to turn on automatically at specific time that you choose.
Before using the timer, you must set the Monitor's Time as described previously.
1
2
Press Menu/set button to display the main OSD
menu.
Time set
On Time
On Channel
On Volume
Off Time
Sleep
AM 03:29
AM 05:11 ON
99
Select the TIME main menu with PG+ / PG- button
on the remote control.
100
3
4
Press Menu/Set to enter the sub menu.
AM 05:11 OFF
OFF
Select On Time with PG+ / PG- button and press
VOL+ button.
5
Move the cursor by VOL-, VOL+ button and adjust
time by PG+, PG- button.
On Time
AM 05:11 ON
48
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time
On Channel
Set the channel when the Monitor power turn on automatically.
Available only when the Time is set and On Time is ON.
1
2
Press Menu/set button to display the main OSD menu.
Time set
On Time
On Channel
On Volume
Off Time
Sleep
AM 03:29
AM 05:11 ON
99
Select the TIME main menu with PG+ / PG button
on the remote control.
3
4
Press Menu/Set to enter the sub menu.
100
AM 05:11 OFF
OFF
Select On Channel.
5
6
Enter to the ¥Šꢀpart with VOL+ button.
Then the cursor moves into the ¥Šꢀparts.
Adjust the channel with PG+/ PG- button.
Press BACK button to return.
On Volume
Set the sound volume level when the Monitor power on automatically.
Available only when the Time is set and On Time is ON.
1
2
Press Menu/set button to display the main OSD menu.
Time set
On Time
On Channel
On Volume
Off Time
Sleep
AM 03:29
AM 05:11 ON
99
Select the TIME main menu with PG+ / PG button
on the remote control.
Press Menu/Set to enter the sub menu.
3
4
5
100
AM 05:11 OFF
OFF
Select On Volume.
Enter to the ¥Šꢀpart by pressing VOL+ button.
Then the cursor moves into the ¥Šꢀparts.
Adjust the sound volume level with PG+ / PG button.
6
49
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Time
Off Time
This the Monitor can be set to turn off automatically at specific times that you choose.
Before using the timer, you must set the Monitor's clock as described previously.
1
2
Press Menu/set button to display the main OSD
menu.
Time set
On Time
On Channel
On Volume
Off Time
Sleep
AM 03:29
AM 05:11 ON
99
Select the TIME main menu with PG+ / PG button
on the remote control.
100
3
4
Press Menu/Set to enter the sub menu.
AM 05:11 OFF
OFF
Select Off Time with PG+ / PG- button on the
remote control and press VOL+ button.
5
Move the cursor with VOL- / VOL+ button and
adjust time with PG+ / PG- button.
Off Time
AM 05:11 ON
Sleep
You can set your the Monitor to automatically turn off after a preset interval.
If you turn off the Monitor in the state of setting up sleep time and turn on again, sleep time erased therefore
set up again. The time period runs from OFF(0min) to 180min. (OFF, 10min, 20, 30, 60, 90, 120, 150, 180)
1
2
Press Menu/set button to display the main OSD
menu.
Time set
On Time
On Channel
On Volume
Off Time
Sleep
AM 03:29
AM 05:11 ON
99
Select the TIME main menu. with PG+ / PG button
on the remote control.
100
3
4
Press Menu/Set to enter the sub menu.
AM 05:11 OFF
OFF
Select Sleep with PG+ / PG- button on the remote
control and press VOL+ button.
5
Enter to the ¥Šꢀpart with VOL+ button. Then the
cursor moves into the ¥Šꢀparts.
6
7
Set the time period with PG+ / PG- button.
Press BACK button to return.
50
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your monitor is not working properly, please scan this list of problems and possible solutions.
It may save you time and money.
Problem
Quick Action for Possible Solution
Check whether the Monitor is turned on.
No picture & No sound
•
•
•
Power cord inserted into wall outlet?
Plug another product's power cord into the wall outlet where the
Monitor's power cord was plugged in.
Picture OK & No sound
•
•
Press the VOLUME(Š) button.
Check the audio input signal.
The remote control doesn't work
•
•
Check to see if there is any object between the Monitor
and the remote control causing obstruction.
Check to see if the batteries are installed with the correct
polarities.
Digital broadcasting screen problem
No or Poor color or Poor picture
•
Check the digital signal strength and input antenna.
•
•
•
•
Select Color in the Picture and press VOLUME (Š) button.
Keep a certain distance between the Monitor and the input source.
Activate any function to restore the brightness of the picture.
Check to see that both the monitor and the source are
plugged in and turned on.
•
•
•
Adjust the Brightness or Contrast settings.
Adjust the Size settings.
The image is too light or too dark
The image is too large or too small
No output from one of the speakers
Adjust Balance in the Sound Menu.
51
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Card
Limited Warranty
Subject to the Limitations, Exclusions and Disclaimers hereof, InFocus Corporation ("InFocus") warrants that the
LCD Thin Display Device and Accessories (hereinafter collectively or individually referred to as "Product" as
appropriate) purchased from InFocus, an InFocus dis tributor, or an InFocus reseller will conform to InFocus'
specifications and be free from defects in material or workmanship for the respective Limited Warranty period
provided below. InFocus does not warrant that the Product will meet the specific requirements of the end-user
customer. If the Product while subject to this Limited Warranty, is defective in material or workmanship during the
warranty period, then InFocus, at its option, will REPAIR or REPLACE the Product. All exchanged parts and
Products replaced under this Limited Warranty will become property of InFocus. InFocus' sole obligation is to
supply (or pay for) all labor necessary to repair the Product found to be defective within the Limited Warranty
period and to repair or replace defective parts with new parts or, at the option of InFocus, serviceable used parts
that are equivalent or superior to new parts performance. Limited Warranty periods are as follows:
Product Limited Warranty Period: one (1) year from date of purchase.
Accessory Product Limited Warranty Period: one (1) year from date of purchase.
WARRANTY LIMITATION AND EXCLUSION
THIS WARRANTY SETS FORTH INFOCUS' MAXIMUM LIABILITY FOR ITS PRODUCT.
THIS WARRANTY EXTENDS ONLY TO PRODUCTS PURCHASED FROM INFOCUS OR AN INFOCUS
AUTHORIZED RESELLER. . InFocus shall have no further obligation under the foregoing Limited Warranty if the
Product has been damaged due to abuse, improper ventilation, fire, water, disaster, mispackaging, shipping,
lightning or other acts of nature, misuse, neglect, smoke exposure (cigarette or otherwise), accident, unusual
physical or electrical stress and/or power surges, unauthorized modifications (including use of an unauthorized
mount), tampering, alterations, service other than by InFocus or its authorized service providers, or failure
caused other than from ordinary use or failure to properly use the Product in the application for which said
Product was intended. In addition, failure of the end-user to follow maintenance procedures as outlined in the
product's user guide, where a schedule is specified for regular cleaning of certain parts (based on usage and
environment), and the end-user has failed to follow such schedule, the Product will not be covered under the
Limited Warranty. Finally, InFocus shall have no further obligation if InFocus Product was subjected to operating
conditions outside of the range specified in the user's guide or in this Limited Warranty. This Limited Warranty
excludes Product cleaning, repair, or replacement of plastics and glass due to cosmetic damage and damage as
a result of normal wear. Product repair outside of the terms of the Limited Warranty will be on a time and
materials basis. Prolonged Product "demonstration" causes unusual Product wear and is not considered normal
use under the terms of this Limited Warranty. Wide screen format displays (16:9, the aspect ratio of the screen
width to height) are primarily designed to view wide screen format full-motion video. The images displayed on
them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers
this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark
side-bars on non-expanded standard 4:3 ratio format video, should be limited to no more than 15% of the total
viewing time. LCD burn-in as a result of excessive display of static images is not covered under the terms of this
Limited Warranty. The Accessory Product Limited Warranty covers the accessory item only and excludes normal
wear. Remanufactured Products and Software Products are exempt from the foregoing Limited Warranty. Please
refer to the appropriate Remanufactured Product Limited Warranty or Software Product Limited Warranty for
applicable Warranty information.
DISCLAIMER OF UNSTATED WARRANTIES
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE DISCLAIMED.
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF AND
THE FOREGOING WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN
INSTRUMENT SIGNED BY INFOCUS. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU.
52
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Card
Limited Warranty Period
The Limited Warranty periods hereof commence on the date of purchase by the end-user customer. These
Limited Warranty provisions shall apply only to the end-user purchaser (first person or entity that purchased a
new Product for personal or business use and not for the purpose of distribution or resale).
SOME JURISDICTIONS MAY GRANT YOU CONSUMER RIGHTS WITH MINIMUM WARRANTY DURATION
THAT DIFFER FROM THE DURATIONS PROVIDED HEREIN, AND INFOCUS WILL HONOR ALL SUCH
CONSUMER RIGHTS.
To Be Eligible For Limited Warranty Coverage
Any person exercising a claim under this Limited Warranty must establish to the satisfaction of InFocus both the
date of purchase and that the Product was purchased new from InFocus or an InFocus authorized reseller. The
sales receipt or invoice, showing the date of purchase of the Product is the proof of the date of purchase.
To Obtain Warranty Service
During the Limited Warranty period, to exercise this Limited Warranty, the purchaser must first contact 1)
InFocus, 2) a service facility authorized by InFocus or 3) the place of original purchase.
For Warranty service, the purchaser will be advised to return or deliver the defective Product freight and all fees
prepaid, to an InFocus Service Center or to a service facility authorized by InFocus. When returning Product to
InFocus, a Return Materials Authorization (RMA) # is required and must be clearly displayed on the outside of
the shipping carton or a similar package affording an equal degree of protection. InFocus or the service facility
authorized by InFocus will return the repaired/replaced Product freight prepaid to the purchaser.
Products returned for Warranty service must be accompanied by a written letter that: (i) explains the problem; (ii)
provides proof of date of purchase; (iii) provides the authorized reseller's name; and (iv) provides the model and
serial number of the Product. Upon request of InFocus Corporation or a service facility authorized by InFocus,
proof of legal import must accompany the warranty repair Product, otherwise the Product must be returned to the
place of original purchase, to the manufacturer (Purchaser must bear all tax, duty and freight), or the Purchaser
must bear charges for the warranty repair.
No repair or replacement of Product or part thereof shall extend the Limited Warranty period as to the entire
Product. Warranty on the repair part and workmanship shall only be effective for a period of ninety (90) days
following the repair or replacement of that part or the remaining period of the Product Limited Warranty whichever
is greater.
LIMITATION OF LIABILITY
IT IS UNDERSTOOD AND AGREED THAT INFOCUS' LIABILITY WHETHER IN CONTRACT, IN TORT, UNDER
ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE AMOUNT
OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL INFOCUS
BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS,
LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCTS IS A CONSIDERATION IN
LIMITING INFOCUS' LIABILITY.
Limitation on Bringing Action - No action, regardless of form, arising out of the agreement to
purchase the Product may be brought by purchaser more than one year after the cause of action has accrued.
Governing Law - Any action, regardless of form, arising out of the agreement to purchase the Product is
governed by Oregon law.
Mandatory Arbitration - Any action, regardless of form, arising out of the agreement to purchase the
Product is subject to mandatory arbitration.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, DEPENDING ON JURISDICTION.
53
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
54
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|