INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS FOR AIR COMPRESSOR
MODEL
EC 10SB (SL) EC 12
EC 10SB(SL)
EC 12
WARNING
Improper and unsafe use of this compressor can result in death or serious bodily injury!
This manual contains important information about product safety.
Please read and understand this manual before operating the compressor.
Please keep this manual available for others before they use the compressor.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
IMPORTANT SAFETY INSTRUCTIONS
FOR USE OFTHE COMPRESSOR
WARNING: Death or serious bodily injury could result from improper or unsafe use of compressor.
To avoid these risks, follow these basic safety instructions:
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS.
9. CONSIDER WORK AREA ENVIRONMENT.
Risk of electric shock. Don’t expose compressor to
rain. Don’t use compressor in damp or wet locations.
Keep work area well lit and well ventilated.
Risk of fire or explosion. Do not carry and operate the
compressor or any other electrical device near the
spray area. Don’t use compressor in the presence of
flammable liquids or gases.
Never place your hands, fingers or other body parts
near the compressor’s moving parts.
Never insert your fingers or other objects into the
housing's ventilator. Such an action invites the danger
of injuries or electric shocks.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE.
Never operate this compressor without all guards or
safety features in place and in proper working order. If
maintenance or servicing requires the removal of a
guard or safety features, be sure to replace the guard
or safety features before resuming operation of the
compressor.
Compressor produces sparks during operation. Never
use compressor in sites containing lacquer, paint,
benzine, thinner, gasoline, gases, adhesive agents,
and other materials which are combustible or
explosive.
10. KEEP CHILDREN AWAY.
3. ALWAYS WEAR PROTECTION.
Do not let visitors contact compressor extension cord.
All visitors should be kept safely away from work
area.
Risk of injury. Always wear ANSI Z87.1 safety glasses
or equivalent eye protection. Compressed air must
never be aimed at anyone or any part of the body.Use
ear protection as air flow noise is loud when draining.
11. DRESS PROPERLY.
Do not wear loose clothing or jewelry. They can be
caught in moving parts.
Wear protective hair covering to contain long hair.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces such as
pipes, radiators, ranges and refrigeration enclosures.
This compressor must be properly grounded. Never
operate the compressor in damp or wet locations.
To reduce risk of electric shock, do not remove cover.
12. DON’T ABUSE CORD.
Never yank it to disconnect from receptacle.
Keep cord from heat, oil and sharp edges.
.
13. MAINTAIN COMPRESSOR WITH CARE.
Follow instructions for lubricating.
Inspect cords periodically and if damaged, have
repaired by authorized service center. Inspect
extension cords periodically and replace if damaged.
5. DISCONNECT THE COMPRESSOR.
Always disconnect the compressor from the power
source and remove the compressed air from the air
tank before servicing, inspecting, maintaining,
cleaning, replacing or checking any parts.
6. AVOID UNINTENTIONAL STARTING.
14. OUTDOOR USE EXTENSION CORDS.
When compressor in used outdoors, use only
extension cords intended for use outdoors and so
marked.
Do not carry the compressor while it is connected to
its power source or when the air tank is filled with
compressed air. Be sure the knob of the pressure
switch in the “OFF” position before connecting the
compressor to its power source.
15. STAY ALERT.
Watch what you are doing. Use common sense. Do
not operate compressor when you are tired.
Compressor should never be used by you if you are
under the influence of alcohol, drugs or medication
that makes you drowsy.
7. STORE COMPRESSOR PROPERLY.
When not in use, the compressor should be stored in
indoor dry place. Keep out of reach of children. Lock-
out the storage area.
8. KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas of
unnecessary tools, debris, furniture, etc.
— 3 —
Download from Www.Somanuals.com. All Manuals Search And Download.
16. CHECK DAMAGED PARTS AND AIR LEAK.
Before further use of the compressor, a guard or
other part is damaged should be carefully checked to
determine that it will operate properly and perform
its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts,
mounting, air leak, and any other conditions that may
affect its operation.
24. USE ONLY GENUINE HITACHI REPLACEMENT PARTS.
Replacement parts not manufactured by Hitachi may
void your warranty and can lead to malfunction and
resulting injuries. Genuine Hitachi parts are available
from your dealer.
25. DO NOT MODIFY THE COMPRESSOR.
Do not modify the compressor. Always contact the
Hitachi authorized service center any repairs.
Unauthorized modification may not only impair the
compressor performance but may also result in
accident or injury to repair personnel who do not have
the required knowledge and technical expertise to
perform the repair operations correctly.
A guard or other part that is damaged should be
properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this
Instruction Manual.
Have defective pressure switches replaced by
authorized service center.
Do not use compressor if switch does not move it on
and off.
26. PUSH THE KNOB OF THE PRESSURE SWITCH TO OFF
WHEN THE COMPRESSOR IS NOT USED.
17. NEVER USE COMPRESSOR FOR APPLICATIONS
OTHER THAN THOSE SPECIFIED.
When the compressor is not used, push the knob of
the pressure switch OFF, disconnect it from the power
source and open the drain cock to discharge the
compressed air from the air tank.
Never use compressor for applications other than
those specified in the Instruction Manual.
18. HANDLE COMPRESSOR CORRECTLY.
27. NEVER TOUCH HOT SURFACE.
To reduce the risk of burns, do not touch tubes, heads,
cylinder and motors.
Operate the compressor according to the instructions
provided herein. Never allow the compressor to be
operated by children, individuals unfamiliar with its
operation or unauthorized personnel.
28. DO NOT DIRECT AIR STREAM AT BODY.
Risk of injury, do not direct air stream at persons or
animals.
19. KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY
IN PLACE.
Never use compressed air for breathing or respirators.
Keep all screws, bolts, and covers tightly mounted.
Check their conditions periodically.
29. DRAIN TANK.
Risk of bursting. Water will condense in the air tank. If
not drained, water will corrode and weaken the air
tank causing a risk of air tank rupture.
Drain tank daily or after 4 hours of use.
To drain tank open valve slowly and tilt compressor to
empty accumulated water.
20. KEEP MOTOR AIR VENT CLEAN.
The motor air vent must be kept clean so that air can
freely flow at all times. Check for dust build-up
frequently.
21. OPERATE COMPRESSOR AT THE RATED
VOLTAGE.
30. DO NOT STOP COMPRESSOR BY PULLING OUT
THE PLUG.
Operate the compressor at voltages specified on their
nameplates.
If using the compressor at a higher voltage than the
rated voltage, it will result in abnormally fast motor
revolution and may damage the unit and burn out the
motor.
This could result in damage to the unit.
Use the “ON/OFF” knob of pressure switch.
31. MAKE SURE THE COMPRESSOR OUTLET PRESSURE
IS SET LOWER THAN THE MAXIMUM OPERATING
PRESSURE OF THE TOOL.
22. NEVER USE A COMPRESSOR WHICH IS DEFECTIVE
OR OPERATING ABNORMALLY.
Too much air pressure causes a hazardous risk of
bursting. Check the manufacturer's maximum
pressure rating for air tools and accessories. The
regulator outlet pressure must never exceed the
maximum pressure rating.
If the compressor appears to be operating unusually,
making strange noises or vibration, or otherwise
appears defective, stop using it immediately and
arrange for repairs by a Hitachi authorized service
center.
32. DO NOT ATTEMPT TO OPERATE THIS
COMPRESSOR WITHOUT FIRST ADDING OIL TO THE
CRANKCASE. (only for EC12)
23. DO NOT WIPE PLASTIC PARTS WITH SOLVENT.
Solvents such as gasoline, thinner, benzine, carbon
tetrachloride, and alcohol may damage and crack
plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened
with soapy water and dry thoroughly.
The compressor is shipped without oil in the
crankcase.
Serious damage can result from even limited
operation unless filled with oil and broken in correctly.
Make sure to closely follow initial prior to operation
procedures.
— 4 —
Download from Www.Somanuals.com. All Manuals Search And Download.
33. THE SAFETY VALVE MUST WORK PROPERLY.
Risk of bursting. Before starting the compressor pull
the ring on the safety valve to make sure the valve
moves freely. If the safety valve does not work
properly, over-pressurization may occur, causing air
tank rupture or an explosion.
REPLACEMENT PARTS
When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service
center.
GROUNDING INSTRUCTIONS
This compressor should be grounded while in use to protect the
operator from electric shock. The compressor is equipped with a
three-conductor cord and three-prong grounding type plug to fit the
proper grounding type receptacle. The green (or green and yellow)
conductor in the cord is the grounding wire. Never connect the
green (or green and yellow) wire to a live terminal.
We recommend that you never disassemble the compressor or try to
do any rewiring in the electrical system. Any repairs should be
performed only by HITACHI Service Centers or other qualified service
organizations. Should you be determined to make a repair yourself,
remember that the green colored wire is the “grounding” wire. Never
connect this green wire to a “live” terminal. If you replace the plug on the
power cord, be sure to connect the green wire only to the grounding
(longest) prong on a 3-prong plug.
If in doubt, call a qualified electrician and have the receptacle checked
for ground.
— 5 —
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTENSION CORD
Use only three-wire extension cords that have three-prong grounding-type plugs and three-pole receptacles that accept the
compressor’s plug. Replace or repair damaged cord.
Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and
overheating. Table shows the correct size to use depending on cord length and name plate ampere rating. If in doubt, use
the next heavier gage. The smaller the gage number, the heavier the cord.
MINIMUM GAGE FOR CORD SETS
Total Length of Cord in Feet (Meter)
0 – 25
26 – 50
51 – 100
101 – 150
(0 – 7.6)
(7.9 – 15.2)
(15.5 – 30.5)
(30.8 – 45.7)
2
Ampere Rating
Wire guage size AWG(mm )
More Not More
Than
Than
0 – 6
6 – 10
18 (1.0)
18 (1.0)
16 (1.5)
14 (2.0)
16 (1.5)
16 (1.5)
14 (2.0)
14 (2.0)
14 (2.0)
12 (3.5)
12 (3.5)
16 (1.5)
16 (1.5)
12 (3.5)
10 – 12
12 – 16
Not Recommended
WARNING: Avoid electrical shock hazard. Never use this compressor with a damaged or frayed electrical cord or
extension cord. Inspect all electrical cords regularly. Never use in or near water or in any environment
where electric shock is possible.
SAVE THESE INSTRUCTIONS
AND
MAKE THEM AVAILABLE TO
OTHER USERS OF THIS TOOL!
— 6 —
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND MAINTENANCE
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of
the compressor.
Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own
compressor.
NAME OF PARTS
Intake filter
Knob of the pressure switch
Knob of the pressure reducer
Tap (air outlet)
Motor
Pressure gauge (B)
indicates the working pressure
Pressure gauge (A)
Tank
indicates the pressure
in the air tank
Drain cock
EC 10SB(SL)
Knob of the pressure switch
Pressure gauge (A)
indicates the pressure
in the air tank
Head
Pressure gauge (B)
indicates the working pressure
Intake filter
Dipstick
Tank
Tap (air outlet)
Motor
Knob of the pressure reducer
EC 12
Fig. 1
— 7 —
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model
EC10SB(SL)
EC12
Motor
Single-Phase, Induction Motor
Single-Phase, 240V AC 50Hz
Power Source
2 HP
(1.5 KW)
Input
Current
9.5 A
4 gal.
(15.1 ltr)
Tank Capacity
116 PSI
(8 bar)
125 PSI
(8.6 bar)
Maximum Pressure
at 40 PSI
(2.8 bar)
6.3 CFM
(177 ltr/min)
5.9 CFM
(168 ltr/min)
Free Air
Delivery
at 90 PSI
(6.2 bar)
5.1 CFM
(144 ltr/min)
4.8 CFM
(136 ltr/min)
at 100 PSI
(6.9 bar)
4.6 CFM
(130 ltr/min)
4.6 CFM
(130 ltr/min)
Lubrication
Oil-less
Oil
ACCESSORY
PRIORTO OPERATION
1. Power source
WARNING:Accessory other than these shown
below can lead to malfunction and
Ensure that the power source to be utilized conforms
to the power source requirements specified on the
product nameplate.
resulting injuries.
2. Power switch
Ensure that the knob of the pressure switch is in the
“OFF” position (Fig. 2). If the plug is connected to a
receptacle while the knob is in the “ON” position, the
compressor will start operating immediately and can
cause serious injury.
STANDARD ACCESSORY
EC 10SB(SL)
NO ACCESSORIES
ON
EC 12
Dipstick - - - - - - - - - - - - - - 1
OFF
OFF
ON
Knob of the pressure switch
EC 10SB(SL)
EC 12
APPLICATIONS
Fig. 2
⅜ Air source of the pneumatic nailer and stapler.
3. Extension cord
When the work area is far away from the power
source, use an extension cord of sufficient thickness
and rated capacity (refer page 6). The extension cord
should be kept as short as practicable.
WARNING: Never use compressor for
applications other than compressor
for pneumatic nailer and stapler.
WARNING: Damaged cord must be replaced or
repaired.
— 8 —
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Right running position
4. Confirm the power receptacle
If the power receptacle only loosely accepts the plug,
the receptacle must be repaired. Contact the nearest
electric store for repair service.
Position the compressor on a flat surface , in a well
ventilated area away from atmospheric agents and
not in explosive areas.
If such a faulty receptacle is used, may cause
overheating, resulting in a serious hazard.
TRANSPORT
5. Dipstick insertion and oil level check
(If your compressor is EC10SB(SL) this step is not
necassary.)
Push the knob of the pressure switch to "OFF" and
disconnect it from the power source before move the
compressor. Transport the compressor in the correct
manner.
Use a screwdriver or similar tool to remove the plastic
cap on the lower part of the cylinder (Fig. 3).
Cylinder
OPERATION
Plastic cap
1. Start up
Insert the plug into the receptacle and start the
compressor by pulling the knob of the pressure switch
to “ON” (Refer to Fig. 2).
WARNING: Do not stop or start the compressor
by use of the plug. Always use “ON/
OFF” knob located on the pressure
switch.
Fig. 3
The operation of the compressor is automatic and is
controlled by the pressure switch which stops it when
the pressure in the air-tank reaches the maximum
level and restart it when the air pressure drops during
use to the restart level.
The motor of the compressor is fitted with a thermal
protection inside-the wrap, which stops the
compressor when the temperature is too high. Should
this be tripped, the compressor will restart
automatically after 15-20 minutes.
Insert the accessory dipstick all the way to the bottom.
Remove the dipstick and make sure the oil level is
within the range of the dipstick notches (Fig. 4).
Dipstick
Air vent
2. Adjustment of working pressure
Unlock the knob of the pressure reducer pulling it up,
adjust the pressure to the required level by turning the
knob clockwise to increase and counterclockwise to
decrease.
(EC12)
A pressure gauge (B) is provided to know when the
required pressure is reached, lock the knob by
pushing it down firmly (Refer to Fig. 5).
MAX.
MIN.
When adjusting the pressure, check and make sure
that a pressure gauge for the tank has the pressure
level that is higher than that of the pressure to be
adjusted.
It is also imperative that you make adjustment by
slowly starting up the pressure from the level that is
lower than the pressure to be adjusted.
Fig. 4
WARNING:Drain tank to release air pressure
before removing the dipstick.
WARNING:Make sure air vent in dipstick is free
WARNING: Check the manufacturer’s maximum
pressure rating for nailers, staplers
and accessories. Compressor outlet
pressure must be regulated so as to
never exceed the maximum pressure
rating of the nailers, staplers and
accessories.
from debris. If air vent is blocked
pressure can build in crankcase
causing damage to compressor and
possible personal injury.
When the oil volume is insufficient, refer to the section
“Oil change-oil topping off” on page 10 for a descrip-
tion of how to supply the oil.
— 9 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Knob of the pressure switch
MAINTENANCE
WARNING: Disconnect the compressor from the
power source and remove the
compressed air from the air tank
before performing the maintenance
operations. Allow the compressor to
cool before performing the
Knob of the
pressure
reducer
maintenance operations.
1. Cleaning the intake filter
Remove the intake filter (Refer to Fig. 1) every 50
hours or once a week and clean the inside of the
intake filter and the filter element with compressed air
(Fig. 7).
Pressure gauge (A)
indicates the pressure
in the air tank
Use a phillips screwdriver to disassemble intake filter.
Pressure gauge (B)
indicates the working
WARNING: Never clean filter element with a
flammable liquid or solvent.
pressure
EC 10SB(SL)
CAUTION : Do not operate without the intake
filter.
Pressure gauge (A)
indicates the pressure
in the air tank
Pressure gauge (B)
indicates the working
pressure
Fig. 7
NOTE: Replace the filter element when it becomes dirty.
2. Draining tank
Knob of the pressure reducer
Drain tank daily or after 4 hours of use. Open drain
fitting and tilt compressor to empty accumulated
water (Refer to Fig. 6).
Knob of the
pressure switch
3. Oil change-oil topping off
(Only for EC12)
EC 12
Fig. 5
CAUTION : Overfilling with oil will cause
premature compressor failure. Do not
overfill.
3. Shutdown
(1) Push the knob of the pressure switch to “OFF”
(Refer to Fig. 1 and Fig. 2).
(2) Unplug the plug from power source.
(3) Open the drain cock located at the lower part of
the tank (Fig. 6).
(1) Within the first 50 hours of operation, completely
replace the oil of the pumping element. Unfasten
the oil drain cap on the casing cover, drain all the
oil, and screw the cap back on (Refer to Fig. 8 ).
Drain cock
Tank
Fig. 6
— 10 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Dra
Fig. 8
Pour oil into the hole of the dipstick.
To the level indicated on the dipstick (Refer to Fig.
4).
For oil replacement, follow the table below.
OIL TYPE
SAE 5W50 SYNTHETIC OIL (–20°+120°F)
For both summer and winter use
SAE 10W40 MULTI-GRADED OIL (+50°+120°F)
For warm weather use only
(2) Check the oil level of the pumping element every
50 hours or once a week.
(3) Change the oil every 300 working hours or every 6
months.
SERVICE AND REPAIRS
All quality compressors will eventually require servicing
or replacement of parts because of wear from normal use.
To assure that only authorized replacement parts will be
used, all service and repairs must be performed by a
HITACHI AUTHORIZED SERVICE CENTER, ONLY.
NOTE:Specifications are subject to change without any
obligation on the part of the HITACHI.
— 11 —
Download from Www.Somanuals.com. All Manuals Search And Download.
— 12 —
Download from Www.Somanuals.com. All Manuals Search And Download.
EC10SB(SL)
Item
No.
1
Code No.
Part Name
Q’ty Reference No.
Joint
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
4
1
1
1
1
1
2
4
4
4
4
1
7084080000
7011220000
7014300000
7030780000
7570550000
7458340000
4085010000
7012010000
4085100000
4200020000
4190350000
7060010000
7640100000
7150580000
5154280008
7150590000
7011040000
7030190000
7200190000
7060550000
4280640000
5040860008
7021010000
7670040000
7020240000
7060320000
7660240000
4012690000
7023040000
7130510000
7013060000
7329000000
7018010000
7232500000
7190040000
7230010000
7130440000
7192270000
7012290000
7090070000
7250240000
7081090000
7100120000
7081140000
7110240000
7360140000
7030190000
7011040000
7021010000
7310320000
881-455
881-551
881-415
881-414
881-456
881-453
881-620
881-450
882-612
882-595
882-613
881-478
881-409
881-411
2
Screw
Screw
3
4
Washer
5
Head
6
Filter plate
Intake filter
Screw
7
8
9
Set of gaskets
Monoplate
Conrod-cylinder kit
Bearing
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Cover
Motor housing
Tank
Compressor housing
Screw
881-398
881-399
881-573
882-614
882-615
882-616
882-617
881-401
881-402
882-618
882-619
884-600
884-601
881-504
884-602
884-444
884-603
881-480
882-608
881-494
881-496
882-610
881-493
881-410
881-513
884-604
881-511
881-510
881-505
882-606
881-577
881-573
881-399
881-401
884-605
Washer
Fan
Bearing
Carter / Shaft / Rotor
Crankshaft
Nut
Carter
Nut
Bearing
Rotor
Wound stator
Blocking nut
Tap
Screw
Infeed cable
Tension rod
Infeed tube
Non return valve
Tube
Discharge tap
Safety valve
Screw
Plug
Pressure switch
Joint
Pressure reducer
Joint
Pressure gauge
Rubber
Washer
Screw
Nut
Capacitor
Parts are subject to change without any obligation on the part of
HITACHI due to improvements.
— 13 —
Download from Www.Somanuals.com. All Manuals Search And Download.
— 14 —
Download from Www.Somanuals.com. All Manuals Search And Download.
EC12
Item
No.
1
Item
No.
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
Code No.
881-450
881-554
881-553
881-453
881-590
881-555
881-591
881-559
881-560
881-463
881-592
881-551
881-593
881-594
Part Name
Q’ty Reference No.
Code No.
881-510
882-606
881-511
881-504
881-505
881-576
881-401
884-604
Part Name
Pressure reducer
Pressure gauge
Joint
Q’ty Reference No.
Screw
1
1
1
1
1
1
1
1
1
2
1
4
1
1
1
2
1
1
1
1
4
1
1
2
2
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
2
4
2
1
1
4
1
4
1
1
1
1
1
1
7012010000
7210430000
7210010000
7458340000
7084190000
4082200000
7575070000
4080020000
7050020000
7041010000
5150150008
7011220000
7570060000
7459480000
7193350000
7020070000
7220020000
7154120000
7150421000
7101130000
7012060000
7181060000
7041010000
7015020000
7310140000
7500030000
4300420000
7013060000
7011430000
7013090000
7650020000
7078460000
5040790008
7060010000
7071020000
5070320008
7660240000
4012050000
7060060000
5110061008
7201280000
7018010000
7012290000
7130440000
7024070000
7041020000
7011100000
7080180000
7360260000
5011410008
7280070000
4084960000
7190040000
4084970000
7130510000
1
2
1
1
1
1
4
1
1
4
4
1
4
4
1
7100120000
7110240000
7081090000
7023040000
7081140000
7085180000
7021010000
7250240000
7192270000
7270060000
7011030000
7329000000
7021030000
7030030000
4084960000
2
Intake filter
Filtering element
Filter plate
Joint
3
4
Blocking nut
Joint
5
6
Set of gaskets
Cylider
Joint
7
Nut
8
Piston rings
Piston pin
Ring
Pressure switch
9
881-493 Safety valve
Rubber
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
881-603
Con rod
881-604 Screw
884-603 Infeed cable
881-589 Nut
Screw
Head
Valve plate
Rubber N/R valve
Nut
881-572 Washer
Bolt + Ferrule
881-489
881-567
881-569
881-568
Parts are subject to change without any obligation on the part of
HITACHI due to improvements.
Piston
Pipe protection
Housing
Rubber membrane
Screw
881-492
881-469
881-463
881-465
881-488
881-487
Dipstick
Ring
Stud bolt
Capacitor
Chock
Tank
884-444
884-450
881-595
881-470
881-473
881-596
881-478
881-474
884-448
881-597
881-598
881-466
882-585
881-599
881-480
881-410
882-610
Screw
Drain cap
Screw
Carter cover
Gasket
Crank shaft
Bearing
Smim ring
Crank case
Rotor
Motor casing
Bearing
Cover
Fan
Tension rod
Screw
Discharge tap
Air hose connector
Ferrule
881-571
881-600
881-583
881-570
881-582
881-601
881-581
881-602
884-602
Screw
Joint
Rubber
Base
Rubber handle
Tube
Non return valve
Infeed tube
Tap
— 15 —
Download from Www.Somanuals.com. All Manuals Search And Download.
— 16 —
Download from Www.Somanuals.com. All Manuals Search And Download.
— 17 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Hitachi Koki Co.,Ltd.
312
Code No. C99128411
Printed in Italy
Download from Www.Somanuals.com. All Manuals Search And Download.
|