HomePlug to Ethernet Bridge
User Manual (GHPB01)
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you for purchasing one of the most user-friendly networking devices on the market. IOGEAR’s HomePlug
to Ethernet Bridges are first-class networking devices designed to network your computers at home (or in your
small office). This device allows you to set up your home network via the most pervasive medium in your house
– the home power lines. It is easy to set up, and it doesn’t require any additional wiring in the house.
To better serve you, IOGEAR offers an array of additional USB 2.0, USB 1.1, FireWire, KVM, and other
peripheral products. For more information or to purchase additional IOGEAR products, visit us at
We hope you enjoy using your IOGEAR HomePlug to Ethernet Bridge, another first-rate connectivity solution
from IOGEAR.
©2002 IOGEAR. All Rights Reserved. PKG-M0024
IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and
Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business
Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no
warranty of any kind with regards to the information presented in this document. All information furnished here is for
informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any
inaccuracies or errors that may appear in this document.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Technical Support
Product Specifications
Limited Warranty
67
69
70
Overview
02
03
04
05
07
14
27
27
38
40
43
48
59
63
Features
Requirements
Introduction
Installation
Network Configuration
Networking Basics
- Network Setup Wizard
- Checking IP Address
- Assign a Static IP address
- Sharing Disks/Folders
- Sharing Printers
- Accessing the Internet
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
IOGEAR's HomePlug Powerline Network Ethernet Bridge allows you to network your home comput-
ers through the electric power lines in the house. Setting up a home network has never been so
simple, just connect your computer to the HomePlug Bridge via the CAT5 patch cable provided in the
package, and then plug the power end to your AC power outlet, you are connected!
This unit is compliant to HomePlug Powerline Specification 1.0 and offers up to 14 Mbps bandwidth
while being less prone to interference. By offering 56-bit DES encryption, it is also much more
secure than other home networking technologies such as wireless Ethernet.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
• No extra wires, using the most pervasive medium in your home - power lines
• Allows multiple computers to share Internet access, printers, and other resources through the
power lines
• Very easy and intuitive to set up and install
• HomePlug Powerline Specification 1.0 compliant
• Up to 14 Mbps bandwidth
• Up to 990' distance through the power lines, far enough for most households
• Worldwide compatibility
• Low risk of interference by other RF sources
• 56-bit DES encryption assures data security
• Signal will not pass power meter, thus keeping the data safe in the house
• Encryption done by hardware, with no sacrifice on bandwidth
• Most reliable home networking technology
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Requirements
SystemRequirements
• Available AC power outlets in the room.
• Standard home power line wiring.
• Computers with 10/100Base-T adapters, or 10/100Base-T switch/hub.
• When used as a node: Windows 98SE, ME, 2000, XP.
• When used as a bridge: any operating system (OS transparent).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IOGEAR's HomePlug to Ethernet Bridge allows you to network your computers via your existing
home power lines. It offers a data transmission speed of up to 14 Mbps, and reaches up to 990 feet
through standard power lines.
Package contents:
1. HomePlug to Ethernet Bridge
2. CAT5 patch cable
3. Power cable
4. User Manual
5. Warranty Registration Card
1.
2.
3.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Front View: (Drawing)
1. Power LED - lights up in green when plugged into
a power outlet
2. Collision LED - lights up in green whenever there
is collision
3. Link LED - lights up in green after plugged into a
power outlet
4. ACT LED - blinks in green when there is network
activity
5. Ethernet port - connecting to the computer
6. Normal/Uplink button - you only need to use this
button when connecting the bridge to a switch/hub.
Push this button when connects to the Uplink port on a switch.
Another criteria for you to decide whether you need press this
button is to look at the light inside the Ethernet port, if it is not on or
flashing, you need to press this button.
Back View:
1. Power port - connecting to the wall outlet
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
There are several ways to network your computers using the HomePlug Bridge. Before we get
started, please NOTE:
Do not place HomePlug devices under direct sunlight or near high heat emitting devices;
Do not place HomePlug devices near water or wet surfaces to avoid electric hazards;
Do not place HomePlug devices on any moving or unstable surfaces;
It is recommended that you plug the HomePlug devices directly into the wall outlets, not to any power
adapters, surge protectors or any device that filters signals.
If you plan to use this unit as a BRIDGE, not as a NODE; there is a limitation of having only TWO
BRIDGES PER NETWORK, (refer to the Network Terms for details):
1. Remove the HomePlug Bridge, the power cord, the CAT5 cable and the installation CD from the package.
2. Allocate a space for the adapter's placement. Make sure you avoid the places mentioned above.
3. Plug one end of the CAT5 cable into the Ethernet port on the computer, and the other end into the Ethernet port
of the bridge.
4. Plug the power cord into the HomePlug bridge and wall outlet.
5. At this point, the Power and Link LED should be on, and you should see the ACT (Activity) LED start blinking.
6. Turn on your computer and set up your networks (refer to Network Basics for more information).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
If you plan to use this unit as a
NODE, not as a BRIDGE (refer to
the Network Terms for details):
1. Remove the HomePlug Bridge, the
power cord, the CAT5 cable and the
installation CD from the package.
2. Allocate a space for the adapter's
placement. Make sure you avoid the
places mentioned on the previous
page.
3. Make sure that your HomePlug bridge
is NOT CONNECTED TO THE
COMPUTER before you install the
driver.
4. Insert the installation CD. If CD does
not automatically load, run (CD Drive
Letter):\usb\setup.exe.
5. Click Next.
(Note: When used as node, thebridge uses the same driver as thehomeplug USB adapter.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
6. Read, understand and accept the
License Agreement and Con-
tinue by clicking Next.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
7. Enter a username and organiza-
tion name, and continue installa-
tion. (Username and Organiza-
tion have no importance in device
operation. This window might
look slightly different on other plat-
forms.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
8. Click Install to start the Installa-
tion Wizard:
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
9. After installation is successful, a win-
dow will pop up prompting for the in-
stallation of the HomePlug Bridge. Plug
in the CAT5 cable, one end into the
Ethernet port on the HomePlug Bridge,
the other end into an available network
port on your computer. Please verify
that the green Power LED and Link LED
on the HomePlug Bridge light up.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
10. You have reached the end of your installation.
Please restart your computer for changes to
go into effect.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
HomePlug Node Configuration Steps:
1. After restarting your computer, you should see this icon on your desktop. Click on it to begin configuring your
HomePlug device.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
2. Click Next to begin the configuration.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
3. Click Next to continue.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
4. Type in a network password between 4
and 24 characters long and click Next.
The password can consist of numbers
and/orletters.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
5. Click Next.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
6. Once your HomePlug Network has
been configured, click Next. If other de-
vices are present on the HomePlug net-
work, their MAC addresses will be
shown in "HomePlug Network De-
vices".
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
7. After the configuration is complete, click
Finish.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
Network Terms
What is a node?
A node is any given device that resides or is connected onto an existing network. A computer with a
network card connected to a switch is a node. The same thing applies to a Mac connected to a hub.
What is a bridge?
A bridge is used when connecting one side of the network with another network. Previously, connecting
every computer together with the other network would mean having cables all over the place. Instead
a bridge was brought in to have 1 connection between the networks instead of 20. The bridge in the
HomePlug terms functions like a concentration device that connects many computers onto the HomePlug
network using 1 HomePlug device.
How do I know if I require a node or a Bridge?
If you want to connect only one computer to the Power line network, you need a node. If you plan to
connect a group of computers currently not HomePlug ready to the Power line network, you need a
bridge. The HomePlug USB adapter can only be used as a node. The HomePlug Ethernet Bridge can
be used as either a node or bridge. It is designed as a bridge in default; the only way to turn it off is to
install the utility software that comes with the unit. That will turn the bridge into a node. If used as bridge,
there is a limitation of having only two bridges on the same Power line network.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
You will have to use bridges to connect two Macintoshes, because the utility software is only compatible
with Windows-based computers.
Can I use both in the same network?
Yes. It is possible to have both nodes and bridges on a network as long as there is only a maximum
of 2 bridges. It is also fine to have USB nodes on the same network with Ethernet nodes.
How do I decide whether I need a USB adapter or Ethernet bridge as a node?
It should be determined by the available connection on the computer that you plan to connect to the
HomePlug network. If the computer comes with a 10/100 Base-T network card, use the bridge; if the
computer comes with USB port, use the USB adapter. If the computer comes with both, you can
decide which one to use based upon your unique situation.
For Macintosh and other non-Windows based computers, the Ethernet Bridge is the only choice.
HomePlug Network Topologies
There are various ways to connect your computers via HomePlug. If all HomePlug units are used as nodes,
the topology is usually BUS. If bridges are used to connect two networks together, there maybe both BUS
and STAR. The following are several examples.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
a. Using the HomePlug to USB Adapter ONLY
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
b. Using the HomePlug Ethernet Bridge (Node Mode)
(Several HomePlug Bridges can be used)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
c. Using the HomePlug USB Adapter AND Ethernet Bridge (Node Mode)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
d. Using the HomePlug Ethernet bridge to make a sub network HomePlug ready to communicate with
the other HomePlug nodes. (Only 2 Homeplug Bridges can be used.)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Prior to installing HomePlug, you may have had some ideas about using your new network. This
section will help you get started on those ideas or even give you some new ones. It will go through
the process of sharing files, printing from any computer on the network, or accessing the Internet on
multiple computers with one connection. Please note that this section is just an outline of a few
networking basics and not intended to be a comprehensive guide to networking.
Topic 1: Using Network Setup Wizard in Windows XP/2000
In the following section, you will learn how to set up a network at a home or business, using Microsoft
Windows XP/2000.
Go to My Computer>Control Panel>Network Connections.
Select "Set up a home or small office network".
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Click "Next" in the window(right) for the
Network Setup Wizard.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Read and follow the instructions in the
following window and then click "Next".
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
In the following window, select among
the 3 options which best describe this
computer and then click "Next". If your
computer connects to a broadband router/
gateway, select the second option.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Fill in the information in the following
window as you desire and then click
"Next”.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Enter the Workgroup name as you
wish and then click "Next". (Very
important: All computers on your net-
work should have the same
Workgroup.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Review the setting in the following
screen, and click "Next" to continue. If you
want to change any settings, you need to
click "Back" and start over again.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Please wait while the Network Setup Wiz-
ard applies the changes and configures the
computer.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
When the configuration is done, the follow-
ing screen will come up. Select one of the 4
options according to your needs. (In this
example, the last choice was selected.)
Click “Next.”
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Then click "Finish" on this next
window.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
The new setting will take effect after you restart the computer. Click "Yes" to restart the
computer.
Congratulations, you have completed configuring this computer! After setting up networks on
all your computers on the network, you will be able to use your HomePlug network to share
files, printers, and Internet connections.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Topic 2: Checking IP ad-
dresses in Windows XP/
2000
Go to
Start>Programs>Accessories>
Command Prompt.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Type "ipconfig" at the prompt, then press Enter.
You will see the IP address of this computer.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Topic 3: Assigning a Static IP Address
(Note: If you use DHCP-capable gateway/router,
you don't need to assign any static IP addresses
because the gateway/router will automatically as-
sign IP addresses to the computers on the net-
work.)
Go to Start>Settings>Control Panel>Network
Connections>Local Area Connection
Right click on Local Area Connection, then double
click on Properties, you will see a window similar
to this:
Select “Internet Protocol (TCP/IP)” and then click
on Properties.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
At the following window, select "Use the
following IP address:", and fill in the desired IP
address and subnet mask (it is recommended
to use the default subnet mask as shown in the
following window. Subnet mask must be the
same for all the computers on the network.)
If you need to enter DNS address, you must enter
the address of the default gateway.
Click on "OK".
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Click "Close" on the Local Area Connection Properties
window.
You have completed static IP address assignment.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Topic 4. Sharing Disks/Folders
Once the network has been checked / configured, you can access other systems via "My Network
Places". To allow other systems to access data on your disks / in your folders, you have to give
permission to share your disks and/or folders.
1. Select the disk (or the folder) to be shared (for example in "My Computer") and right-click on the
icon of the disk to get the Context / popup-menu; select "Sharing and Security."
It is recommended to share only folders instead of the disk drive to avoid any security related
issues.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Once you have selected the
folder to be shared, right-click
to select “sharing and secu-
rity.”
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
2. In the following window, click to select "Share this
folder". Then click on "Permission".
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
3. Please note that by default, all users defined on
your XP Professional system will have full
permissions. You can reduce the permissions
(for example to allow only Read-access) and/or
you could add a different group of users to have
access permission (but then you should delete
the group "Everyone" from this list).
In the following Permission settings, make sure
you are giving the right permissions and then
click OK to accept the settings.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
4. Click OK on the original Sharing and Security
window to conclude the process.
5. Once a disk or folder is shared, the icon will
show it via the "holding hand.”
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Topic 5. Share Printers
You may now share any installed
printers connected to this computer
with other computers on your net-
work.
1. Using the computer that has the
printeralreadyconnectedtoit,go
to: Start > Control Panel > Print-
ers and Faxes.
Click on the printer you want to
share with others on the network
and select "Share this printer".
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
2. In the following window, click on "Share this
Printer" and type in the share name you
would like. After this is done, click on "Ap-
ply" and then "OK".
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Nowwhenyougoto"Print-
ers and Faxes" in the
Control Panel, you will see
thesupportinghandunder-
neath the printer, which
means that the printer is
being shared in the net-
work.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
For a computer to access a Network
Printer, the device driver or software
for that printer must be installed and
pointed to the proper location of the
printer. This is done similarly to the
way you installed the printer on the
computer it is connected to.
1. Go to a computer that is not
connected to the printer and select
"Start" from the Task Bar "Control
Panel" then "Printers and other
Hardware".
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
2. Click on "Add a printer".
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
3. Select the network printer
option and click Next.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
4. Find the printer you would
like to share and click
Next.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
Decide if you would like to
choose this printer as a
default printer and
click Next.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking Basics
You have now added the
printer to your computer,
clickFinish.
Now you may use the
Network Printer as if it were
directly connected to
the computer. Make sure
that the computer which is
directly connected to the
printer is on.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Internet Access
Topic 6. Sharing Internet Access
So how can the Internet connection be shared among other computers on the HomePlug
network?
Since neither the HomePlug Bridge nor USB Adapter are capable of routing at this time, a
routerisnecessaryinordertoshareanInternetconnection. FutureversionsoftheHomePlug
Bridge or USB Adapter may feature built-in routing capabilities.
The following items are required for successfully sharing the Internet connection:
One (1) Router
One (1) HomePlug Bridge
One (1) DSL/Cable Modem
Active ISP Service for the DSL/Cable Modem
CAT5Cables
Also all computers that share the Internet connection must be connected to a
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Internet Access
HomePlug to USB Adapter or a HomePlug Bridge.
Please note that only two (2) HomePlug Bridges are allowed on one network if used as bridges
(without installation of the software).
Please follow these steps for setting up Internet Sharing:
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Internet Access
a. Make sure that the DSL/Cable modem is connected to the Router (using the WAN port
ontherouter.)
b. Connect the HomePlug Bridge to the Router (using the Uplink port on the router.)
c. Check the link light on the HomePlug Bridge. It must light up green.
IMPORTANT:
The HomePlug Bridge MUST connect to the "Uplink" port on the router.
d. Make sure that the computers that need access to the Internet via the HomePlug
network are each connected to a HomePlug Adapter or a HomePlug Bridge and
reside on the same power grid.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Internet Access
Checking Router Settings:
Please make sure that the following settings on your router are set:
(The setup windows will depend on the router manufacturer's software.)
A) The IP should be obtained automatically;
B) DHCP must be enabled;
C) Release DHCP and then Renew DHCP to reset the IP Addresses. It is recom-
mended that you verify that IP Addresses are obtained.
Once all the above steps have been completed, all HomePlug connected computers will be
able to access the Internet.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Frequently Asked Questions/Troubleshooting
1. Will HomePlug work in my house or apartment?
If the house or apartment was built under U.S. building standards using copper wiring, then
it will work.
2. What types of security problems will I be facing?
If your house is on the same power grid as your neighbor, then there is a potential for a
hacker to get in through your neighbor's house. However, this is easily remedied by
activating the encryption key on the HomePlug device.
3. Will HomePlug work with Mac?
There is currently no software that supports Macs. However, the HomePlug Ethernet Bridge
will work with Mac when used as a bridge. Also, by installing Virtue PC software on a Mac,
you will be able to install the windows based software under Virtue PC and have this Mac
communicate with other PCs on HomePlug network.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
4. What is the difference between bridge mode and node mode in the HomePlug Ethernet
Bridge (GHPB01)?
Bridge mode operates without software installation and can work with any 10/100Base-T or
10Base-T Ethernet connections. By connecting the bridge to a router, switch, or Ethernet
based device (XBOX, PlayStation, Web Tablet, PocketPC, Computer, etc.), you will be able
to make these devices bridge onto the HomePlug network. Currently, the GHPB01 only
supports 2 bridges per HomePlug Network.
Node mode operates by connecting the HomePlug USB adapter (GHPU01) or Ethernet
bridge (GHPB01) to one computer (ONLY) and installing drivers onto the computer, allowing
it to set the device into Node Mode. The advantage with Node Mode operation is there is no
limitation to the number of nodes that can operate on a HomePlug network.
5. Why do I get a blue screen on boot-up after installation under Windows 98?
You probably have Windows 98 Virtual Private Networking Adapter Installed. This adapter
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
conflicts with the operation of a Bridgedecor.exe file, executed on boot. To repair this
problem, go into Windows Safe Mode and disable the Virtual Private Networking Adapter.
You can disable the Adapter by right clicking on your Network Neighborhood Icon and click-
ing on properties. This will list all adapters installed on your computer. Right click and
select disable on the adapter labeled Virtual Private Networking. This will allow
Bridgedecor.exe to startup correctly on boot.
6. Will HomePlug operate on different Circuit Breakers?
Yes. Circuit breakers do not affect performance of HomePlug devices, however the signal
will not pass through the power transformers outside your house.
7. Can Neighbors get my HomePlug signal?
It is possible for your immediate (next door) neighbor to receive residual signal from your
HomePlug adapter. Unlikely, but possible. To prevent your neighbors from hacking your
network, the best thing you can do is type a different encryption password into your device
when setting the encryption password. Note: All devices must have the same password to
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
be on one network. If devices do not have the same encryption password, they will not be
able to communicate with each other.
8. What OS does the HomePlug utility software fully support?
Windows 98SE, ME, XP, and 2000. Windows NT and Mac are only supported by the
HomePlug Ethernet Bridge (Without installing the HomePlug software with default operat-
ing mode as BRIDGE, not NODE)
9. What is the Range of HomePlug?
Approximately 990 feet (300 meters) in wall power lines.
10. How does 56bit-DES compare with Wireless 802.11b 128bit-WEP encryption?
56bit-DES is superior because of its DES type Encryption. Just because 802.11B uses
128bit-WEP with more bits doesn't mean the encryption is better. Also, the IOGEAR
HomePlug devices use hardware 56bit-DES encryption. With hardware encryption the
signal is almost impossible to crack. The hardware encryption process does not affect
bandwidth, and the encryption is enabled at all times.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Technical Support
To help IOGEAR® customers obtain the highest level of performance from their HomePlug
devices, the IOGEAR® Service Support team is available to answer your technical ques-
tions. Do not hesitate to call if you are having trouble getting your device to work correctly.
IOGEAR® Service Support can be reached by phone from 8am to 5pm Pacific Standard
Time, Monday through Friday or at the following address:
Toll Free 866-9-IOGEAR (USA & Canada)
Phone: 949-453-8782
23 Hubble
Irvine, CA 92618
give a brief description of the problem, and what you were doing when the problem occurred,
before calling Service Support. The Service Support representative will be able to serve you
much quicker if you are prepared to answer the nine questions listed below.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Technical Support
1) What is the purchase date and serial number of the product?
2) Were any messages displayed on the screen when the error occurred? If so, what
was the exact wording of the message?
3) What type of Computer are you using?
4) When does the problem occur?
5) Can the problem be reproduced? If so, what are the steps necessary to reproduce
the problem?
6) What version of the OS are you using?
7) Are you on a network? If so, what type of network is it?
8) What have you already tried to get the problem resolved?
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Specifications
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT,
DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to
the contents or use of this documentation, and especially disclaims its quality, performance, merchant-
ability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or documentation without
obligation to notify any individual or entity of such revisions, or updates. For further inquiries please
contact your direct vendor.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2002 IOGEAR® All Rights Reserved. PKG-M0024
IOGEAR and the IOGEAR logo are trademarks or registered trademarks of IOGEAR Inc. Microsoft and Windows are
registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc.
FireWire, MAC, Macintosh, G3, G4, iMac, Apple are registered trademarks of Apple Computer, Inc. Classic is a registered
trademark, licensed to Apple Computer, Inc. Finder is a trademark of Apple Computer, Inc. All other brand and product
names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with
regards to the information presented in this document. All information furnished here is for informational purposes only
and is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may
appear in this document. Reproduction in whole or part without permission is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact info.
23 Hubble
•
Irvine, CA 92618
•
(P) 949.453.8782
•
(F) 949.453.8785
•
Download from Www.Somanuals.com. All Manuals Search And Download.
|